Firefly开源社区

标题: 3308 115200波特率问题 [打印本页]

作者: hydys 时间: 2020-3-14 17:38
标题: 3308 115200波特率问题
我修改了此处波特率为115200
   fiq_debugger: fiq-debugger {
            compatible = "rockchip,fiq-debugger";
            rockchip,serial-id = <2>;
            rockchip,wake-irq = <0>;
            rockchip,irq-mode-enable = <0>;
            rockchip,baudrate = <115200>;  /* Only 115200 and 1500000 */
            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
            status = "disabled";
      };
内核启动执行到：
[ 0.219551] pinctrl core: initialized pinctrl subsystem
[ 0.226020] NET: Registered protocol family 16
[ 0.236651] cpuidle: using governor menu
[ 0.240724] Registered FIQ tty driver
[ 0.244828] vdso: 2 pages (1 code @ ffffff8008626000, 1 data @ ffffff80088a4000)
[ 0.252416] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.259573] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.268921] console [pstore-1] enabled
[ 0.272759] pstore: Registered ramoops as persistent store backend
[ 0.279084] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.302470] fiq debugger fiq mode enabled
TaS}{򘍞ڶ蕝񒓯쳨mUQ󘕪T￡طQѪÿ«퀙±e𒪣4񵊣󷼃Qֳ¬￡»𨡔u]L2Q
                                         aV¸ժa}a*]뒅3Wʑ폖o￠򏖍￠©«_ ш¡Pʑ쩆jA¨«tQꢑđ￠a«шETa￡̣a«!La'￡«޸«ۖ2Yv3ÿٕˍYE￡𘎹Y
再次出现乱发，请问还有哪里需要修改?

作者: firefly_zhongw 时间: 2020-3-16 09:30
1. 确保UART2的GPIO口没有被复用成其他功能
2. 除了修改kernel的dts，还得修改uboot的u-boot/configs/rk3308_defconfig里的CONFIG_BAUDRATE

欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)