Firefly开源社区

标题: [OpenHarmony 3.1 Release] Firefly ROC-3568-PC移植过程和固件下载 [打印本页]

作者: Firefly_Javier 时间: 2022-4-19 16:17
标题: [OpenHarmony 3.1 Release] Firefly ROC-3568-PC移植过程和固件下载
本帖最后由 Firefly_Javier 于 2022-8-23 15:40 编辑

（本文档随时更新，欢迎反馈和提供关于OpenHarmony的修复补丁）

特殊说明

OpenHarmony 3.1 Release只支持2G/4G内存规格开发板，8G内存无法正常显示。

（本文档已移动到官方WIKI）

编译教程

https://wiki.t-firefly.com/zh_CN/Firefly-Linux-Guide/manual_openharmony.html

https://wiki.t-firefly.com/en/Firefly-Linux-Guide/manual_openharmony.html

附上测试固件

------------------------------------------------------------------------------------------------------------

ROC-RK3568-PC：https://pan.baidu.com/s/1_WQvAAvJSAPFtiiCmPbBpQ?pwd=1234

AIOJ-RK3568: https://pan.baidu.com/s/1lRS7MtWPype74KM0WBKMCw?pwd=1234

样图

------------------------------------------------------------------------------------------------------------

HDMI：

MIPI:

default.zip

735 Bytes, 下载次数: 130, 下载积分: 灯泡 -1 , 经验 -1

作者: BXKJ 时间: 2022-4-20 09:59
楼主，你好。我的开发板是aio-3568J，可以直接烧这个固件吗？还是需要做一下改动

作者: Firefly_Javier 时间: 2022-4-20 11:26

BXKJ 发表于 2022-4-20 09:59
楼主，你好。我的开发板是aio-3568J，可以直接烧这个固件吗？还是需要做一下改动

只用于ROC-3568-PC，AIO 3568J要支持的话，需要添加内核补丁，这个后面再跟进

作者: ylliu3788 时间: 2022-4-20 17:40
请问何时能支持 AIO-3399ProC 开发板？或 Core-3399Pro-JD4?

作者: lingjiao0710 时间: 2022-5-18 09:38
多谢楼主分享，请问如何将自己写的C代码编译程序在openhamony下的3568-PC板子上运行？有单独编译的方式不？

作者: Firefly_Javier 时间: 2022-5-19 09:45

lingjiao0710 发表于 2022-5-18 09:38
多谢楼主分享，请问如何将自己写的C代码编译程序在openhamony下的3568-PC板子上运行？有单独编译的方式不？

使用OpenHarmony的交叉编译工具链：/home/openharmony/prebuilts/gcc/linux-x86/aarch64/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu。
编译完成之后通过 hdc_std 传到开发板

作者: fulsz@qq.com 时间: 2022-5-22 18:29
本帖最后由 fulsz@qq.com 于 2022-5-22 18:34 编辑

老兄，啥时候能加个NFC的内容？如果这块板子能支持NFC就完整了。

作者: fulsz@qq.com 时间: 2022-5-27 00:03
请问下，你这个是接的EDP屏？还是MIPI的？还是LVDS的？烧录了你提供的固件没有点亮呢？
我用的ROC-3568-PC，接的MIPI屏，MIPI0接口上——用官方的固件验证过设备没问题，屏幕可以点亮，触摸正常。

作者: FenixLee 时间: 2022-5-27 09:56
请问你们的3.1 release代码仓是和官方一样的吗，怎么使用官方的代码仓就无法显示桌面

作者: fulsz@qq.com 时间: 2022-5-27 10:56

FenixLee 发表于 2022-5-27 09:56
请问你们的3.1 release代码仓是和官方一样的吗，怎么使用官方的代码仓就无法显示桌面

大概看了下楼主提供的PATCH，应该是没问题的。

作者: Firefly_Javier 时间: 2022-5-27 15:12

fulsz@qq.com 发表于 2022-5-27 00:03
请问下，你这个是接的EDP屏？还是MIPI的？还是LVDS的？烧录了你提供的固件没有点亮呢？
我用的ROC-3568-PC ...

这个SDK提供的补丁，是只点亮HDMI屏幕的，MIPI屏幕在3.1 Release的支持并不好，加上去之后触摸无反应。LVDS屏幕未验证过。

作者: 15882469674 时间: 2022-5-27 15:35
编译完成之后，镜像在 out/rk3568/packages/phone/images/
这一步之后的烧录能详细点吗，烧完之后起不来，参考3.1-beta？

作者: Firefly_Javier 时间: 2022-5-27 16:02

15882469674 发表于 2022-5-27 15:35
编译完成之后，镜像在 out/rk3568/packages/phone/images/
这一步之后的烧录能详细点吗，烧完之后起不来 ...

是的，参考beta，烧写方法一样的

作者: 15882469674 时间: 2022-5-27 16:33
还有个问题，3.1release起来之后，pc端探测不到设备，设备管理器是不出现HDC设备的

作者: Firefly_Javier 时间: 2022-5-27 16:51

15882469674 发表于 2022-5-27 16:33
还有个问题，3.1release起来之后，pc端探测不到设备，设备管理器是不出现HDC设备的

嗯，我在master分支上验证是正常的，3.1 Release没有进行验证，帮不了你。可以看看这个文档：https://gitee.com/openharmony/de ... 5%E8%AF%B4%E6%98%8E

作者: fulsz@qq.com 时间: 2022-5-29 10:07
请问显示屏是这一款吗？淘宝店里看到这款最接近了。我要买下来点亮才能安心
Firefly10.1寸1080P HDMI便携显示器触摸式switch游戏ps4扩展屏

https://item.taobao.com/item.htm ... amp;id=563133240407

作者: wx__s7cU7R 时间: 2022-5-29 18:27
赞赞赞

作者: Firefly_Javier 时间: 2022-6-1 08:39

fulsz@qq.com 发表于 2022-5-29 10:07
请问显示屏是这一款吗？淘宝店里看到这款最接近了。我要买下来点亮才能安心
Firefly10.1寸1080P HDMI便携 ...

HDMI不需要指定用哪个屏幕的，如果你有显示器，接到显示器看看效果也行

作者: fulsz@qq.com 时间: 2022-6-1 09:02
好的，明白，感谢回复。
点亮屏幕相对容易，主要是还想触摸也能用。

作者: Firefly_Javier 时间: 2022-6-1 09:39

fulsz@qq.com 发表于 2022-6-1 09:02
好的，明白，感谢回复。
点亮屏幕相对容易，主要是还想触摸也能用。

触摸可以的

作者: FenixLee 时间: 2022-6-6 11:18
请问有遇到weston起不来的情况吗？解析weston.cfg失败

作者: firefly_linhsh 时间: 2022-6-6 16:46
多谢楼主分享

作者: 小山～only 时间: 2022-6-10 08:46
学习了，感谢分享。

作者: Beau 时间: 2022-6-10 10:09
执行这一句的时候报了这个错误，想问问原因。

作者: Firefly_Javier 时间: 2022-6-10 10:23

Beau 发表于 2022-6-10 10:09
执行这一句的时候报了这个错误，想问问原因。

试下直接用这几个命令：

repo init -u https://gitee.com/openharmony/manifest.git -b refs/tags/OpenHarmony-v3.1-Release --no-repo-verify
repo sync -c
repo forall -c 'git lfs pull'

来自：https://gitee.com/openharmony/do ... o%E8%8E%B7%E5%8F%96

作者: Beau 时间: 2022-6-10 11:14
我的板子是aio 3568j的，可以直接用

这个吗，还是说还没有更新补丁，不能使用

作者: Beau 时间: 2022-6-10 11:47

这里路径不同是因为后期更新没有同步还是说要创建一个文件夹。

作者: Firefly_Javier 时间: 2022-6-10 11:56

Beau 发表于 2022-6-10 11:47
这里路径不同是因为后期更新没有同步还是说要创建一个文件夹。

你进入docker编译，就是/home/openharmony目录

作者: Beau 时间: 2022-6-10 18:58
这是日志文件，

现在卡在这里不动了，用date版好歹在循环的动

build.rar

18.74 KB, 下载次数: 1, 下载积分: 灯泡 -1 , 经验 -1

作者: Firefly_Javier 时间: 2022-6-10 20:56

Beau 发表于 2022-6-10 18:58
这是日志文件，现在卡在这里不动了，用date版好歹在循环的动

不要发编译日志，看串口中系统的日志才有用

作者: Beau 时间: 2022-6-12 10:55

内核卡住了，我的是aio-3568j，想问问原因

系统日志.rar

23.19 KB, 下载次数: 2, 下载积分: 灯泡 -1 , 经验 -1

作者: Firefly_Javier 时间: 2022-6-12 11:43

Beau 发表于 2022-6-12 10:55
内核卡住了，我的是aio-3568j，想问问原因

不能这么搞的

，用firefly的4.19的内核引导Openharmony，Openharmony内核用的是5.10，而且ramdisk与firefly的ramdisk不同

作者: Beau 时间: 2022-6-12 11:55

Firefly_Javier 发表于 2022-6-12 11:43
不能这么搞的，用firefly的4.19的内核引导Openharmony，Openharmony内核用的是5.10，而且ramdis ...

你好，有解决办法吗，我不懂搞了，感谢

作者: FenixLee 时间: 2022-6-14 15:03
请问wifi芯片适配了吗

作者: Firefly_Javier 时间: 2022-6-14 15:24

FenixLee 发表于 2022-6-14 15:03
请问wifi芯片适配了吗

只有支持ap6275s

作者: 小山～only 时间: 2022-6-14 16:00
按楼主分享的编译流程，编译后烧录到板子上，系统起得动，但是HDMI屏幕只亮了uboot阶段的，编译的源码是官方的release3-1版本，用楼主提供的测试固件烧录，也一样HDMI只显示rockchip字样，然后就检测不到信号了

作者: Firefly_Javier 时间: 2022-6-15 09:18

小山～only 发表于 2022-6-14 16:00
按楼主分享的编译流程，编译后烧录到板子上，系统起得动，但是HDMI屏幕只亮了uboot阶段的，编译的源码是官 ...

哪个板子？ROC-3568-PC目前是正常的，AIOJ-3568是有这个问题，还在研究

作者: 15882469674 时间: 2022-6-15 16:01

Firefly_Javier 发表于 2022-6-14 15:24
只有支持ap6275s

ap6275s ROC-3568-PC在buildroot版本上都起不来...

作者: Firefly_Javier 时间: 2022-6-15 20:56

15882469674 发表于 2022-6-15 16:01
ap6275s ROC-3568-PC在buildroot版本上都起不来...

这个我们已经支持了的，发下kernel日志让我们确认一下

作者: FenixLee 时间: 2022-6-16 13:55

小山～only 发表于 2022-6-14 16:00
按楼主分享的编译流程，编译后烧录到板子上，系统起得动，但是HDMI屏幕只亮了uboot阶段的，编译的源码是官 ...

目测用了4.19的内核，3.1release要用5.10的内核

作者: 小山～only 时间: 2022-6-16 16:31

Firefly_Javier 发表于 2022-6-15 09:18
哪个板子？ROC-3568-PC目前是正常的，AIOJ-3568是有这个问题，还在研究

是ROC-3568-PC，3.1 Release的需要借助buildroot的固件吗，我看那个文章被楼主标为过时，所以是采用这篇文章的编译流程编译出来的固件直接烧录到板子上的，串口调试可以看到系统是起来了的，但HDMI确实只亮了rockchip一瞬间。

作者: 小山～only 时间: 2022-6-16 16:35

FenixLee 发表于 2022-6-16 13:55
目测用了4.19的内核，3.1release要用5.10的内核

直接按文章流程来的，打的楼主补丁，是内核5.1的，如果用buildroot编译的4.19内核加上ohos编译的部分镜像，像3.1beta那样烧录，系统是起不来的，因为打的补丁是内核5.1的

作者: 小山～only 时间: 2022-6-16 16:42

小山～only 发表于 2022-6-16 16:31
是ROC-3568-PC，3.1 Release的需要借助buildroot的固件吗，我看那个文章被楼主标为过时，所以是采用这篇 ...

补一下，编译流程参照文章的，但bash build/prebuilts_download.sh 不是在docker里面执行的，这个应该不影响吧，源码文件夹和预编译下载的文件夹在同一层目录，讲该层目录加给了docker，然后进行docker，再进入源码文件夹，执行编译的。

作者: Firefly_Javier 时间: 2022-6-16 18:53

小山～only 发表于 2022-6-16 16:31
是ROC-3568-PC，3.1 Release的需要借助buildroot的固件吗，我看那个文章被楼主标为过时，所以是采用这篇 ...

用我发的测试固件可以吗？

作者: FenixLee 时间: 2022-6-17 14:02

Firefly_Javier 发表于 2022-6-14 15:24
只有支持ap6275s

头大，这个芯片好像hihope那边就适配好了，不知道怎么适配新的芯片

作者: 15882469674 时间: 2022-6-17 17:15

Firefly_Javier 发表于 2022-6-15 20:56
这个我们已经支持了的，发下kernel日志让我们确认一下

https://dev.t-firefly.com/forum. ... mp;page=1#pid297841

作者: 15882469674 时间: 2022-6-17 17:18

小山～only 发表于 2022-6-16 16:42
补一下，编译流程参照文章的，但bash build/prebuilts_download.sh 不是在docker里面执行的，这个应该不 ...

3.1-release和最新的3.2-beta我都适配好了，完全没问题，但需要自己改动内核和openharmony的部分启动参数

作者: Firefly_Javier 时间: 2022-6-20 11:07

15882469674 发表于 2022-6-17 17:18
3.1-release和最新的3.2-beta我都适配好了，完全没问题，但需要自己改动内核和openharmony的部分启动参数

3.2 beta可以显示吗？我这边在ROC-3568-PC试过HDMI是无法显示的

作者: 15882469674 时间: 2022-6-20 11:48

Firefly_Javier 发表于 2022-6-20 11:07
3.2 beta可以显示吗？我这边在ROC-3568-PC试过HDMI是无法显示的

可以的，需要使用hihope提供的内核，使用ROC-3568-PC的dts，编译完，把out/..../images/目录下的所有镜像烧录进去，就能显示

作者: Firefly_Javier 时间: 2022-6-20 11:52
本帖最后由 Firefly_Javier 于 2022-6-20 11:54 编辑

15882469674 发表于 2022-6-20 11:48
可以的，需要使用hihope提供的内核，使用ROC-3568-PC的dts，编译完，把out/..../images/目录下的所有镜像 ...

嗯，确实可以的，刚刚验证过，可能我之前搞错了

作者: 大头菜 时间: 2022-6-21 11:01
wifi有适配HDF驱动吗，还是只适配了内核驱动

作者: Firefly_Javier 时间: 2022-6-21 14:36

大头菜发表于 2022-6-21 11:01
wifi有适配HDF驱动吗，还是只适配了内核驱动

直接用hihope的hdf驱动的，没有做适配

作者: 大头菜 时间: 2022-6-21 17:07

Firefly_Javier 发表于 2022-6-21 14:36
直接用hihope的hdf驱动的，没有做适配

那hdf驱动可以用吗大佬

作者: fulsz@qq.com 时间: 2022-6-27 12:32

Firefly_Javier 发表于 2022-6-20 11:07
3.2 beta可以显示吗？我这边在ROC-3568-PC试过HDMI是无法显示的

3.2 Master分支---之前试过，HDMI停留在LOGO界面桌面没起来，实测MIPI是起来了。测试了DAYU200的板子一样的，所以结论很明显了

作者: fulsz@qq.com 时间: 2022-7-1 11:11
请教个问题：这个开发板烧录OpenHarmony 3.2 Master分支最新的版本，烧录进去之后无法正常启动。执行do_one_initcall至level 7，最后执行到synchronize_rcu();陷在里面没出来。
早几周没这个现象，最近几天才碰到的。不知道楼主有没有注意到？
下面是最后调用synchronize_rcu();之前打印的。
[ 7.497219] Call trace:
[ 7.497242]  dump_backtrace+0x0/0x1a8
[ 7.497258]  show_stack+0x2c/0x38
[ 7.497278]  dump_stack+0xd4/0x110
[ 7.497297]  __sysrq_swap_key_ops+0xd0/0x140
[ 7.497311]  register_sysrq_key+0x2c/0x38
[ 7.497329]  __drm_fb_helper_initial_config_and_unlock+0x41c/0x4c8
[ 7.497345]  drm_fb_helper_initial_config+0x3c/0x50
[ 7.497364]  rockchip_drm_fbdev_init+0xb4/0xfc
[ 7.497382]  rockchip_drm_bind+0x4c4/0x660
[ 7.497401]  try_to_bring_up_master+0x238/0x284
[ 7.497417]  __component_add+0xec/0x144
[ 7.497433]  component_add+0x2c/0x38
[ 7.497450]  dw_mipi_dsi_rockchip_host_attach+0x30/0xb4
[ 7.497469]  dw_mipi_dsi_host_attach+0xfc/0x11c
[ 7.497485]  mipi_dsi_attach+0x34/0x48
[ 7.497502]  HdfDrmPanelEntryInit+0x260/0x37c
[ 7.497521]  HdfDeviceLaunchNode+0x118/0x1a0
[ 7.497537]  HdfDeviceAttach+0x108/0x158
[ 7.497554]  DevHostServiceAddDevice+0x170/0x1c4
[ 7.497573]  DevHostServiceClntInstallDriver+0x134/0x1a4
[ 7.497589]  DevmgrServiceAttachDeviceHost+0xac/0xc0
[ 7.497606]  DevmgrServiceClntAttachDeviceHost+0xcc/0xe0
[ 7.497622]  DevHostServiceStartService+0x38/0x3c
[ 7.497638]  DriverInstallerStartDeviceHost+0x78/0xd4
[ 7.497656]  DevmgrServiceStartHostProcess+0xb0/0x198
[ 7.497674]  DevmgrServiceStartDeviceHost+0x124/0x194
[ 7.497692]  DevmgrServiceStartDeviceHosts+0xf8/0x150
[ 7.497711]  DevmgrServiceStartService+0x9c/0xb0
[ 7.497727]  DeviceManagerStart+0xbc/0x114
[ 7.497745]  DeviceManagerInit+0x64/0xdc
[ 7.497762]  do_one_initcall_nmw_level7+0x80/0x19c
[ 7.497780]  kernel_init_freeable+0x380/0x388
[ 7.497797]  kernel_init+0x34/0x174
[ 7.497813]  ret_from_fork+0x10/0x18

作者: Firefly_Javier 时间: 2022-7-1 11:21

fulsz@qq.com 发表于 2022-7-1 11:11
请教个问题：这个开发板烧录OpenHarmony 3.2 Master分支最新的版本，烧录进去之后无法正常启动。执行do_one ...

这个是在初始化MIPI屏幕的时候报错的，你是用的Firefly的dts？

作者: fulsz@qq.com 时间: 2022-7-1 21:31

Firefly_Javier 发表于 2022-7-1 11:21
这个是在初始化MIPI屏幕的时候报错的，你是用的Firefly的dts？

是的。用了你之前适配3.1的DTS文件——我增加mipi屏的参数。几周前还能正常工作，最近几天不行了。

作者: 小山～only 时间: 2022-7-6 22:42
按新流程下载源码，编译烧录固件后，hdmi屏幕启动阶段亮了一下，最终系统没有起来，不断重启。
串口启动log如下：
DDR Version V1.10 20210810
In
ddrconfig:7
LPDDR4X, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=8192MB
tdqss: cs0 dqs0: 48ps, dqs1: -48ps, dqs2: -24ps, dqs3: -144ps,
tdqss: cs1 dqs0: 72ps, dqs1: -72ps, dqs2: -24ps, dqs3: -120ps,

change to: 324MHz
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:41%
dram drv:40,odt:0
clk skew:0x61

change to: 528MHz
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 780MHz
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 1560MHz(final freq)
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:22%
dram drv:40,odt:80
vref_ca:00000071
clk skew:0x1c
cs 0:
the read training result:
DQS0:0x34, DQS1:0x38, DQS2:0x3a, DQS3:0x30,
min  : 0xe  0xe 0x10  0xd  0x2  0x7  0xa  0x3 , 0xd  0xc  0x3  0x2 0x10  0xe 0x,
   0x18 0x18  0xe  0xc  0x8  0x3  0x5  0x7 , 0xe  0xa  0x9  0x3  0xe 0x10 0x,
mid  :0x2a 0x2b 0x2c 0x29 0x1d 0x23 0x26 0x1f ,0x29 0x28 0x1f 0x1f 0x2c 0x2a 0x,
   0x32 0x33 0x28 0x28 0x22 0x1f 0x21 0x23 ,0x26 0x23 0x21 0x1c 0x29 0x2a 0x,
max  :0x47 0x48 0x48 0x46 0x39 0x3f 0x42 0x3c ,0x46 0x45 0x3b 0x3c 0x49 0x46 0x,
   0x4c 0x4e 0x42 0x45 0x3c 0x3b 0x3e 0x3f ,0x3e 0x3c 0x39 0x35 0x44 0x45 0x,
range:0x39 0x3a 0x38 0x39 0x37 0x38 0x38 0x39 ,0x39 0x39 0x38 0x3a 0x39 0x38 0x,
   0x34 0x36 0x34 0x39 0x34 0x38 0x39 0x38 ,0x30 0x32 0x30 0x32 0x36 0x35 0x,
the write training result:
DQS0:0x25, DQS1:0x13, DQS2:0x18, DQS3:0x0,
min  :0x76 0x7a 0x7a 0x79 0x69 0x6e 0x70 0x6f 0x6e ,0x5f 0x5d 0x55 0x57 0x62 0x,
   0x69 0x6a 0x63 0x63 0x5b 0x58 0x5b 0x5e 0x60 ,0x53 0x53 0x4f 0x4c 0x58 0x,
mid  :0x93 0x96 0x96 0x94 0x84 0x89 0x8c 0x89 0x88 ,0x7a 0x79 0x6f 0x71 0x7e 0x,
   0x86 0x86 0x7e 0x7f 0x77 0x73 0x75 0x79 0x7b ,0x6f 0x6d 0x6a 0x67 0x72 0x,
max  :0xb0 0xb2 0xb2 0xaf 0x9f 0xa4 0xa8 0xa3 0xa3 ,0x96 0x96 0x89 0x8b 0x9a 0x,
   0xa4 0xa3 0x9a 0x9c 0x94 0x8e 0x90 0x94 0x97 ,0x8c 0x88 0x86 0x82 0x8d 0x,
range:0x3a 0x38 0x38 0x36 0x36 0x36 0x38 0x34 0x35 ,0x37 0x39 0x34 0x34 0x38 0x,
   0x3b 0x39 0x37 0x39 0x39 0x36 0x35 0x36 0x37 ,0x39 0x35 0x37 0x36 0x35 0x,
cs 1:
the read training result:
DQS0:0x37, DQS1:0x37, DQS2:0x3a, DQS3:0x31,
min  :0x10 0x12 0x13  0xf  0x3  0x8  0xb  0x5 , 0xc  0xa  0x3  0x2 0x10  0xe 0x,
   0x16 0x15  0xd  0xa  0x5  0x2  0x5  0x5 , 0xd  0xa  0x7  0x2 0x10  0xf  0,
mid  :0x2c 0x2e 0x2f 0x2c 0x1f 0x25 0x27 0x22 ,0x28 0x27 0x1e 0x1f 0x2c 0x2a 0x,
   0x30 0x32 0x28 0x27 0x21 0x1f 0x22 0x22 ,0x27 0x25 0x22 0x1e 0x2b 0x2c 0x,
max  :0x49 0x4b 0x4b 0x49 0x3c 0x43 0x44 0x3f ,0x44 0x45 0x39 0x3c 0x48 0x46 0x,
   0x4b 0x4f 0x43 0x45 0x3e 0x3d 0x3f 0x3f ,0x42 0x40 0x3d 0x3a 0x47 0x49 0x,
range:0x39 0x39 0x38 0x3a 0x39 0x3b 0x39 0x3a ,0x38 0x3b 0x36 0x3a 0x38 0x38 0x,
   0x35 0x3a 0x36 0x3b 0x39 0x3b 0x3a 0x3a ,0x35 0x36 0x36 0x38 0x37 0x3a 0x,
the write training result:
DQS0:0x25, DQS1:0x13, DQS2:0x18, DQS3:0x0,
min  :0x79 0x7c 0x7e 0x7c 0x6c 0x71 0x73 0x73 0x70 ,0x5a 0x58 0x51 0x52 0x5d 0x,
   0x69 0x6a 0x62 0x62 0x5b 0x58 0x59 0x5d 0x5f ,0x55 0x55 0x50 0x4d 0x58 0x,
mid  :0x95 0x98 0x99 0x97 0x87 0x8b 0x8e 0x8c 0x8b ,0x76 0x75 0x6b 0x6c 0x79 0x,
   0x86 0x86 0x7c 0x7e 0x77 0x72 0x74 0x77 0x7a ,0x71 0x70 0x6b 0x68 0x74 0x,
max  :0xb2 0xb5 0xb5 0xb2 0xa2 0xa6 0xaa 0xa5 0xa6 ,0x92 0x92 0x85 0x86 0x96 0x,
   0xa3 0xa2 0x97 0x9a 0x93 0x8d 0x8f 0x92 0x96 ,0x8d 0x8b 0x86 0x84 0x91 0x,
range:0x39 0x39 0x37 0x36 0x36 0x35 0x37 0x32 0x36 ,0x38 0x3a 0x34 0x34 0x39 0x,
   0x3a 0x38 0x35 0x38 0x38 0x35 0x36 0x35 0x37 ,0x38 0x36 0x36 0x37 0x39 0x,
CA Training result:
cs:0 min  :0x4b 0x46 0x3e 0x37 0x3f 0x34 0x44 ,0x4a 0x45 0x3f 0x38 0x3d 0x39 0x,
cs:0 mid  :0x87 0x87 0x79 0x78 0x7a 0x73 0x70 ,0x87 0x83 0x7c 0x78 0x79 0x76 0x,
cs:0 max  :0xc4 0xc8 0xb5 0xb9 0xb6 0xb3 0x9d ,0xc5 0xc2 0xba 0xb8 0xb6 0xb4 0x,
cs:0 range:0x79 0x82 0x77 0x82 0x77 0x7f 0x59 ,0x7b 0x7d 0x7b 0x80 0x79 0x7b 0x,
cs:1 min  :0x48 0x4c 0x3b 0x3e 0x3f 0x3b 0x45 ,0x49 0x4d 0x3e 0x40 0x3d 0x41 0x,
cs:1 mid  :0x88 0x87 0x7b 0x79 0x7d 0x75 0x73 ,0x8b 0x87 0x7f 0x79 0x7e 0x7a 0x,
cs:1 max  :0xc9 0xc2 0xbb 0xb5 0xbb 0xaf 0xa2 ,0xcd 0xc1 0xc1 0xb3 0xbf 0xb4 0x,
cs:1 range:0x81 0x76 0x80 0x77 0x7c 0x74 0x5d ,0x84 0x74 0x83 0x73 0x82 0x73 0x,
out
U-Boot SPL board init
U-Boot SPL 2017.09-ga1f6fc00a0-210413 #ldq (Apr 13 2021 - 11:35:00)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 10
spl: mmc init failed with error: -95
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256+ OK
## Checking uboot 0x00a00000 ... sha256+ OK
## Checking fdt 0x00b473e0 ... sha256+ OK
## Checking atf-2 0x00068000 ... sha256+ OK
## Checking atf-3 0xfdcd0000 ... sha256+ OK
## Checking atf-4 0xfdcc9000 ... sha256+ OK
## Checking atf-5 0x00066000 ... sha256+ OK
## Checking optee 0x08400000 ... sha256+ OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
Total: 223.831 ms

INFO: Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-181-gc9a647cae:cl
NOTICE:  BL31: Built : 10:55:41, Oct 18 2021
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: pmu v1 is valid
INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-619-g48b7c13e2 #hisping.lin (gcc version 10.2.1 204
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0xa00000
INFO: SPSR = 0x3c9


U-Boot 2017.09(u-boot commit id: f96005d8a15eae38b335acac8566b796a5f8a5ea)(sdk )

Model: Firefly RK3568 Board
PreSerial: 2, raw, 0xfe660000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: ed331000
Relocation fdt: eb9f80c8 - eb9fece8
CR: M/C/I
Using default environment

dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v1
boot mode: None
FIT: No boot partition
=================begin===================
99731 bytes read in 150 ms (648.4 KiB/s)
DTB(Distro): rk-kernel.dtb
I2c0 speed: 100000Hz
PMIC:  RK8090 (on=0x10, off=0x00)
vdd_logic init 900000 uV
vdd_gpu init 900000 uV
vdd_npu init 900000 uV
io-domain: OK
Could not find baseparameter partition
Model: Firefly RK3568-ROC-PC HDMI (Linux)
Found DTB in resource part
Rockchip UBOOT DRM driver version: v1.0.1
VOP have 1 active VP
vp0 have layer nr:6[0 2 4 1 3 5 ], primary plane: 4
vp1 have layer nr:0[], primary plane: 0
vp2 have layer nr:0[], primary plane: 0
hdmi@fe0a0000 disconnected
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  apll 816000 KHz
  dpll 780000 KHz
  gpll 1188000 KHz
  cpll 1000000 KHz
  npll 1200000 KHz
  vpll 24000 KHz
  hpll 24000 KHz
  ppll 200000 KHz
  armclk 816000 KHz
  aclk_bus 150000 KHz
  pclk_bus 100000 KHz
  aclk_top_high 500000 KHz
  aclk_top_low 400000 KHz
  hclk_top 150000 KHz
  pclk_top 100000 KHz
  aclk_perimid 300000 KHz
  hclk_perimid 150000 KHz
  pclk_pmu 100000 KHz
Net: eth1: ethernet@fe010000, eth0: ethernet@fe2a0000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
android_image_load_by_partname: Can't find part: boot
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No boot partition
FIT: No FIT image
Could not find userdata part
MMC error: The cmd index is 1, ret is -110.....
Card did not respond to voltage select!
mmc_init: -95, time 13
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:4...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
=================begin===================
206 bytes read in 97 ms (2 KiB/s)
1:    rockchip-kernel-5.10
Retrieving file: /ramdisk.img
=================begin===================
2673152 bytes read in 119 ms (21.4 MiB/s)
Retrieving file: /Image
=================begin===================
31342600 bytes read in 321 ms (93.1 MiB/s)
append: earlycon=uart8250,mmio32,0xfe660000 root=PARTUUID=614e0000-0000-4b53-804
Retrieving file: /rk-kernel.dtb
=================begin===================
99731 bytes read in 150 ms (648.4 KiB/s)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 0x0a100000
Booting using the fdt blob at 0x0a100000
  'reserved-memory' abc@80900000: addr=80900000 size=100000
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
Using Device Tree in place at 000000000a100000, end 000000000a11b592
vp0, plane_mask:0x3f, primary-id:4, curser-id:-1
vp1, plane_mask:0x0, primary-id:0, curser-id:-1
vp2, plane_mask:0x0, primary-id:0, curser-id:-1
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 1548.414 ms

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000] Linux version 5.10.79 (root@fd2a73821eb3) (aarch64-linux-gnu-gcc2
[ 0.000000] Machine model: Firefly RK3568-ROC-PC HDMI (Linux)
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drmB
[ 0.000000] Zone ranges:
[ 0.000000] DMA    [mem 0x0000000000200000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x0000000009400000-0x00000000efffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[ 0.000000] cma: Reserved 16 MiB at 0x00000000ef000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 30 pages/cpu s83496 r8192 d31192 u122880
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xfe660000 root=PA8
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byt)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf000)
[ 0.000000] Memory: 7829264K/8108032K available (15806K kernel code, 3216K r)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 59260 entries in 232 pages
[ 0.000000] ftrace: allocated 232 pages with 4 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu:    RCU event tracing is enabled.
[ 0.000000] rcu:    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000]  Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 ji.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 320 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[ 0.000000] ITS [mem 0xfd440000-0xfd45ffff]
[ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @210000 (indirect)
[ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @2)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000000230000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000000024000
[ 0.000000] random: get_random_bytes called from start_kernel+0x3b4/0x528 wi0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
[ 0.002176] Console: colour dummy device 80x25
[ 0.002636] Calibrating delay loop (skipped), value calculated using timer f)
[ 0.003581] pid_max: default: 32768 minimum: 301
[ 0.004172] LSM: Security Framework initializing
[ 0.004650] SELinux:  Initializing.
[ 0.005166] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, l)
[ 0.005944] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byt)
[ 0.009718] rcu: Hierarchical SRCU implementation.
[ 0.011364] Platform MSI: interrupt-controller@fd440000 domain created
[ 0.012434] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd4d
[ 0.014240] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[ 0.016479] Detected VIPT I-cache on CPU1
[ 0.016535] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[ 0.016561] GICv3: CPU1: using allocated LPI pending table @0x000000000025000
[ 0.016633] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 0.018699] Detected VIPT I-cache on CPU2
[ 0.018749] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[ 0.018772] GICv3: CPU2: using allocated LPI pending table @0x000000000026000
[ 0.018829] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 0.020892] Detected VIPT I-cache on CPU3
[ 0.020941] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[ 0.020964] GICv3: CPU3: using allocated LPI pending table @0x000000000027000
[ 0.021019] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 0.021296] smp: Brought up 1 node, 4 CPUs
[ 0.028464] SMP: Total of 4 processors activated.
[ 0.028899] CPU features: detected: Privileged Access Never
[ 0.029408] CPU features: detected: User Access Override
[ 0.029894] CPU features: detected: 32-bit EL0 Support
[ 0.030366] CPU features: detected: Common not Private translations
[ 0.030984] CPU features: detected: RAS Extension Support
[ 0.031482] CPU features: detected: Data cache clean to the PoU not requirede
[ 0.032268] CPU features: detected: CRC32 instructions
[ 0.032741] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.033528] CPU: All CPU(s) started at EL2
[ 0.036685] devtmpfs: initialized
[ 0.064946] Registered cp15_barrier emulation handler
[ 0.065438] Registered setend emulation handler
[ 0.066171] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[ 0.067083] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.068889] pinctrl core: initialized pinctrl subsystem
[ 0.070923] NET: Registered protocol family 16
[ 0.073802] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.074782] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic als
[ 0.076214] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic s
[ 0.077032] audit: initializing netlink subsys (disabled)
[ 0.077875] audit: type=2000 audit(0.073:1): state=initialized audit_enabled1
[ 0.081380] thermal_sys: Registered thermal governor 'fair_share'
[ 0.081391] thermal_sys: Registered thermal governor 'step_wise'
[ 0.082844] cpuidle: using governor menu
[ 0.083792] Registered FIQ tty driver
[ 0.084667] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.085537] ASID allocator initialised with 65536 entries
[ 0.092357] printk: console [ramoops-1] enabled
[ 0.092782] pstore: Registered ramoops as persistent store backend
[ 0.093352] ramoops: using 0xf0000@0x110000, ecc: 0
[ 0.175986] rockchip-gpio fdd60000.gpio0: probed gpio0 (fdd60000.gpio0)
[ 0.181757] rockchip-gpio fe740000.gpio1: probed gpio1 (fe740000.gpio1)
[ 0.187849] rockchip-gpio fe750000.gpio2: probed gpio2 (fe750000.gpio2)
[ 0.192499] rockchip-gpio fe760000.gpio3: probed gpio3 (fe760000.gpio3)
[ 0.195984] rockchip-gpio fe770000.gpio4: probed gpio4 (fe770000.gpio4)
[ 0.196746] rockchip-pinctrl pinctrl: probed pinctrl
[ 0.221234] cryptd: max_cpu_qlen set to 1000
[ 0.229713] fiq_debugger fiq_debugger.0: IRQ fiq not found
[ 0.230256] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[ [ 0.230931] printk: console [ttyFIQ0] enabled
0.230931] printk: console [ttyFIQ0] enabled
[ 0.231737] printk: bootconsole [uart8250] disabled
[ 0.231737] printk: bootconsole [uart8250] disabled
[ 0.232646] Registered fiq debugger ttyFIQ0
[ 0.234358] vcc3v3_sys: supplied by dc_12v
[ 0.235121] vcc5v0_sys: supplied by dc_12v
[ 0.237694] vcc2v5-sys: supplied by vcc3v3_sys
[ 0.238431] pcie30_avdd0v9: supplied by vcc3v3_sys
[ 0.239134] pcie30_avdd1v8: supplied by vcc3v3_sys
[ 0.239933] vcc3v3_bu: supplied by vcc5v0_sys
[ 0.246148] iommu: Default domain type: Translated
[ 0.246609] rk_iommu fdea0800.iommu: version = 2
[ 0.247519] rk_iommu fded0480.iommu: version = 2
[ 0.248071] rk_iommu fdee0800.iommu: version = 2
[ 0.248588] rk_iommu fdef0800.iommu: version = 2
[ 0.249126] rk_iommu fdf40f00.iommu: version = 2
[ 0.249769] rk_iommu fdf80800.iommu: version = 2
[ 0.250323] rk_iommu fdff1a00.iommu: version = 2
[ 0.250834] rk_iommu fe043e00.iommu: version = 2
[ 0.252207] SCSI subsystem initialized
[ 0.252597] usbcore: registered new interface driver usbfs
[ 0.252690] usbcore: registered new interface driver hub
[ 0.252763] usbcore: registered new device driver usb
[ 0.252870] mc: Linux media interface: v0.10
[ 0.253166] videodev: Linux video capture interface: v2.00
[ 0.253432] pps_core: LinuxPPS API ver. 1 registered
[ 0.253451] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
[ 0.253497] PTP clock support registered
[ 0.254652] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 0.254753] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware 0
[ 0.258456] Bluetooth: Core ver 2.22
[ 0.258536] NET: Registered protocol family 31
[ 0.258554] Bluetooth: HCI device and connection manager initialized
[ 0.258580] Bluetooth: HCI socket layer initialized
[ 0.258601] Bluetooth: L2CAP socket layer initialized
[ 0.258644] Bluetooth: SCO socket layer initialized
[ 0.259403] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 0.260743] clocksource: Switched to clocksource arch_sys_counter
[ 1.136555] NET: Registered protocol family 2
[ 1.137103] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, l)
[ 1.143738] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163)
[ 1.144149] TCP established hash table entries: 65536 (order: 7, 524288 byte)
[ 1.144775] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, lin)
[ 1.146789] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.147046] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 1.147503] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linea)
[ 1.148463] NET: Registered protocol family 1
[ 1.149512] RPC: Registered named UNIX socket transport module.
[ 1.149552] RPC: Registered udp transport module.
[ 1.149568] RPC: Registered tcp transport module.
[ 1.149581] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.151173] PCI: CLS 0 bytes, default 64
[ 1.152361] Trying to unpack rootfs image as initramfs...
[ 1.161863] Freeing initrd memory: 2608K
[ 1.163610] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counte
[ 1.174901] Initialise system trusted keyrings
[ 1.175248] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.186265]  hmdfs: hmdfs_init_configfs() init configfs
[ 1.186985] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.188537] NFS: Registering the id_resolver key type
[ 1.188609] Key type id_resolver registered
[ 1.188626] Key type id_legacy registered
[ 1.188686] ntfs: driver 2.1.32 [Flags: R/O].
[ 1.189103] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
[ 1.189529] fuse: init (API version 7.32)
[ 1.190114] SGI XFS with security attributes, no debug enabled
[ 1.248339] NET: Registered protocol family 38
[ 1.248447] Key type asymmetric registered
[ 1.248465] Asymmetric key parser 'x509' registered
[ 1.248543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 1.248562] io scheduler mq-deadline registered
[ 1.248578] io scheduler kyber registered
[ 1.249774] rockchip-csi2-dphy-hw fe870000.csi2-dphy-hw: csi2 dphy hw probe !
[ 1.251144] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[ 1.263355] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pip
[ 1.269989] mpp_service mpp-srv: unknown mpp version for missing VCS info
[ 1.270090] mpp_service mpp-srv: probe start
[ 1.273235] mpp_rkvenc fdf40000.rkvenc: Adding to iommu group 4
[ 1.273651] mpp_rkvenc fdf40000.rkvenc: probing start
[ 1.274238] mpp_rkvenc fdf40000.rkvenc: venc regulator not ready, retry
[ 1.274260] rkvenc_init:1203: failed to add venc devfreq
[ 1.274898] mpp_rkvenc fdf40000.rkvenc: probing finish
[ 1.276887] mpp_vdpu2 fdea0400.vdpu: Adding to iommu group 0
[ 1.277245] mpp_vdpu2 fdea0400.vdpu: probe device
[ 1.278174] mpp_vdpu2 fdea0400.vdpu: probing finish
[ 1.279383] mpp_vepu2 fdee0000.vepu: Adding to iommu group 2
[ 1.279769] mpp_vepu2 fdee0000.vepu: probing start
[ 1.280553] mpp_vepu2 fdee0000.vepu: probing finish
[ 1.281384] rk-pcie 3c0800000.pcie: missing legacy IRQ resource
[ 1.281438] rk-pcie 3c0800000.pcie: Missing *config* reg space
[ 1.281475] rk-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
[ 1.281541] rk-pcie 3c0800000.pcie:    err 0x0380000000..0x03807fffff -> 00
[ 1.281577] rk-pcie 3c0800000.pcie:    IO 0x0380800000..0x03808fffff -> 00
[ 1.281620] rk-pcie 3c0800000.pcie:    MEM 0x0380900000..0x03bfffffff -> 00
[ 1.281682] mpp-iep2 fdef0000.iep: Adding to iommu group 3
[ 1.281688] rk-pcie 3c0800000.pcie: Missing *config* reg space
[ 1.281730] rk-pcie 3c0800000.pcie: invalid resource
[ 1.281973] mpp-iep2 fdef0000.iep: probe device
[ 1.282501] mpp-iep2 fdef0000.iep: allocate roi buffer failed
[ 1.282856] mpp-iep2 fdef0000.iep: probing finish
[ 1.283867] mpp_jpgdec fded0000.jpegd: Adding to iommu group 1
[ 1.284197] mpp_jpgdec fded0000.jpegd: probe device
[ 1.284977] mpp_jpgdec fded0000.jpegd: probing finish
[ 1.286009] mpp_rkvdec2 fdf80200.rkvdec: Adding to iommu group 5
[ 1.286424] mpp_rkvdec2 fdf80200.rkvdec: rkvdec, probing start
[ 1.286981] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
[ 1.287002] rkvdec2_init:687: No niu aclk reset resource define
[ 1.287022] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
[ 1.287037] rkvdec2_init:690: No niu hclk reset resource define
[ 1.287309] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000
[ 1.287331] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000
[ 1.287348] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056
[ 1.287363] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536
[ 1.287439] mpp_rkvdec2 fdf80200.rkvdec: min_width 512
[ 1.287466] mpp_rkvdec2 fdf80200.rkvdec: link mode resource not found
[ 1.287854] mpp_rkvdec2 fdf80200.rkvdec: probing finish
[ 1.289082] mpp_service mpp-srv: probe success
[ 1.299680] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
[ 1.299741] dma-pl330 fe530000.dmac:       DBUFF-128x8bytes Num_Chans-8 Nu6
[ 1.303605] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
[ 1.303658] dma-pl330 fe550000.dmac:       DBUFF-128x8bytes Num_Chans-8 Nu6
[ 1.306162] rockchip-pvtm fde00000.pvtm: pvtm@0 probed
[ 1.306483] rockchip-pvtm fde80000.pvtm: pvtm@1 probed
[ 1.306718] rockchip-pvtm fde90000.pvtm: pvtm@2 probed
[ 1.308364] rockchip-system-monitor rockchip-system-monitor: system monitor e
[ 1.309903] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 1.311455] fe670000.serial: ttyS3 at MMIO 0xfe670000 (irq = 74, base_baud =A
[ 1.313074] fe680000.serial: ttyS4 at MMIO 0xfe680000 (irq = 75, base_baud =A
[ 1.314730] fe6c0000.serial: ttyS8 at MMIO 0xfe6c0000 (irq = 76, base_baud =A
[ 1.319406] rockchip-vop2 fe040000.vop: Adding to iommu group 7
[ 1.330088] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mas4
[ 1.330167] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mas1
[ 1.330197] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mas1
[ 1.330606] [drm] failed to init overlay plane Cluster0-win0
[ 1.330626] [drm] failed to init overlay plane Cluster0-win1
[ 1.330640] [drm] failed to init overlay plane Cluster1-win0
[ 1.330653] [drm] failed to init overlay plane Cluster1-win1
[ 1.331044] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff)
[ 1.331474] dwhdmi-rockchip hdmi: Detected HDMI TX controller v2.11a with HD)
[ 1.332407] dwhdmi-rockchip hdmi: registered DesignWare HDMI I2C bus driver
[ 1.333109] rockchip-drm display-subsystem: bound hdmi (ops 0xffffffc011065d)
[ 1.334118] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sis
[ 1.335875] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem 0
[ 1.345223] mali fde60000.gpu: Kernel DDK version g2p0-01eac0
[ 1.345409] mali fde60000.gpu: Power management initialization failed error 7
[ 1.345448] mali fde60000.gpu: Device initialization Deferred
[ 1.346243] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.347522] brd: module loaded
[ 1.359061] loop: module loaded
[ 1.359880] zram: Added device: zram0
[ 1.360430] lkdtm: No crash points registered, enable through debugfs
[ 1.363746] ahci fc800000.sata: supply ahci not found, using dummy regulator
[ 1.364101] ahci fc800000.sata: supply phy not found, using dummy regulator
[ 1.364405] ahci fc800000.sata: supply target not found, using dummy regulatr
[ 1.364635] ahci fc800000.sata: forcing port_map 0x0 -> 0x1
[ 1.364708] ahci fc800000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 ie
[ 1.364734] ahci fc800000.sata: flags: ncq sntf pm led clo only pmp fbs pio
[ 1.364766] ahci fc800000.sata: port 0 is not capable of FBS
[ 1.367322] scsi host0: ahci
[ 1.367884] ata1: SATA max UDMA/133 mmio [mem 0xfc800000-0xfc800fff] port 0x9
[ 1.371634] libphy: Fixed MDIO Bus: probed
[ 1.373743] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
[ 1.374225] rk_gmac-dwmac fe010000.ethernet: no regulator found
[ 1.374249] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
[ 1.374269] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
[ 1.374288] rk_gmac-dwmac fe010000.ethernet: RX delay(0x26).
[ 1.374314] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[ 1.374401] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
[ 1.374685] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[ 1.375065] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 1.375093] rk_gmac-dwmac fe010000.ethernet:       DWMAC4/5
[ 1.375113] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register suppd
[ 1.375130] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine suppd
[ 1.375146] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[ 1.375160] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[ 1.375278] rk_gmac-dwmac fe010000.ethernet: TSO supported
[ 1.375299] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watr
[ 1.375318] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[ 1.375336] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
[ 1.510842] libphy: stmmac: probed
[ 1.517183] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found
[ 1.517798] rk_gmac-dwmac fe2a0000.ethernet: no regulator found
[ 1.517822] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (input).
[ 1.517842] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c).
[ 1.517860] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f).
[ 1.517886] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
[ 1.517977] rk_gmac-dwmac fe2a0000.ethernet: clock input from PHY
[ 1.518250] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII
[ 1.518635] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 1.518662] rk_gmac-dwmac fe2a0000.ethernet:       DWMAC4/5
[ 1.518683] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register suppd
[ 1.518701] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine suppd
[ 1.518718] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
[ 1.518733] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
[ 1.518843] rk_gmac-dwmac fe2a0000.ethernet: TSO supported
[ 1.518864] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watr
[ 1.518882] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
[ 1.518901] rk_gmac-dwmac fe2a0000.ethernet: Using 32 bits DMA width
[ 1.654116] libphy: stmmac: probed
[ 1.660535] usbcore: registered new interface driver rndis_wlan
[ 1.660701] usbcore: registered new interface driver rtl8150
[ 1.660893] usbcore: registered new interface driver r8152
[ 1.660975] usbcore: registered new interface driver asix
[ 1.661070] usbcore: registered new interface driver ax88179_178a
[ 1.661147] usbcore: registered new interface driver cdc_ether
[ 1.661218] usbcore: registered new interface driver net1080
[ 1.661287] usbcore: registered new interface driver rndis_host
[ 1.661356] usbcore: registered new interface driver cdc_subset
[ 1.661425] usbcore: registered new interface driver zaurus
[ 1.672417] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.672493] ehci-pci: EHCI PCI platform driver
[ 1.672605] ehci-platform: EHCI generic platform driver
[ 1.673289] phy phy-fe8b0000.usb2-phy.1: illegal mode
[ 1.675619] ehci-platform fd800000.usb: EHCI Host Controller
[ 1.676010] ehci-platform fd800000.usb: new USB bus registered, assigned bus1
[ 1.676220] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000
[ 1.681147] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.687472] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[ 1.688005] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b0
[ 1.688029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 1.688047] usb usb1: Product: EHCI Host Controller
[ 1.688063] usb usb1: Manufacturer: Linux 5.10.79 ehci_hcd
[ 1.688079] usb usb1: SerialNumber: fd800000.usb
[ 1.688945] hub 1-0:1.0: USB hub found
[ 1.689036] hub 1-0:1.0: 1 port detected
[ 1.692802] ehci-platform fd880000.usb: EHCI Host Controller
[ 1.693189] ehci-platform fd880000.usb: new USB bus registered, assigned bus2
[ 1.693401] ehci-platform fd880000.usb: irq 22, io mem 0xfd880000
[ 1.704120] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[ 1.704651] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, b0
[ 1.704675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 1.704693] usb usb2: Product: EHCI Host Controller
[ 1.704709] usb usb2: Manufacturer: Linux 5.10.79 ehci_hcd
[ 1.704726] usb usb2: SerialNumber: fd880000.usb
[ 1.705580] hub 2-0:1.0: USB hub found
[ 1.705670] hub 2-0:1.0: 1 port detected
[ 1.707173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.707225] ohci-platform: OHCI generic platform driver
[ 1.707752] phy phy-fe8b0000.usb2-phy.1: illegal mode
[ 1.707784] ohci-platform fd840000.usb: Generic Platform OHCI controller
[ 1.708131] ohci-platform fd840000.usb: new USB bus registered, assigned bus3
[ 1.708342] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000
[ 1.768510] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, b0
[ 1.768556] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 1.768576] usb usb3: Product: Generic Platform OHCI controller
[ 1.768594] usb usb3: Manufacturer: Linux 5.10.79 ohci_hcd
[ 1.768610] usb usb3: SerialNumber: fd840000.usb
[ 1.769450] hub 3-0:1.0: USB hub found
[ 1.769550] hub 3-0:1.0: 1 port detected
[ 1.770854] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[ 1.771226] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus4
[ 1.771432] ohci-platform fd8c0000.usb: irq 23, io mem 0xfd8c0000
[ 1.831857] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, b0
[ 1.831902] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 1.831922] usb usb4: Product: Generic Platform OHCI controller
[ 1.831939] usb usb4: Manufacturer: Linux 5.10.79 ohci_hcd
[ 1.831955] usb usb4: SerialNumber: fd8c0000.usb
[ 1.832793] hub 4-0:1.0: USB hub found
[ 1.832882] hub 4-0:1.0: 1 port detected
[ 1.836048] usbcore: registered new interface driver uas
[ 1.836269] usbcore: registered new interface driver usb-storage
[ 1.836439] usbcore: registered new interface driver usbserial_generic
[ 1.836493] usbserial: USB Serial support registered for generic
[ 1.836579] usbcore: registered new interface driver cp210x
[ 1.836628] usbserial: USB Serial support registered for cp210x
[ 1.836745] usbcore: registered new interface driver ftdi_sio
[ 1.836794] usbserial: USB Serial support registered for FTDI USB Serial Deve
[ 1.837043] usbcore: registered new interface driver keyspan
[ 1.837102] usbserial: USB Serial support registered for Keyspan - (without )
[ 1.837150] usbserial: USB Serial support registered for Keyspan 1 port adapr
[ 1.837197] usbserial: USB Serial support registered for Keyspan 2 port adapr
[ 1.837243] usbserial: USB Serial support registered for Keyspan 4 port adapr
[ 1.837338] usbcore: registered new interface driver option
[ 1.837434] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.837779] usbcore: registered new interface driver oti6858
[ 1.837832] usbserial: USB Serial support registered for oti6858
[ 1.837912] usbcore: registered new interface driver pl2303
[ 1.837960] usbserial: USB Serial support registered for pl2303
[ 1.838066] usbcore: registered new interface driver qcserial
[ 1.838116] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.838225] usbcore: registered new interface driver sierra
[ 1.838273] usbserial: USB Serial support registered for Sierra USB modem
[ 1.839865] usbcore: registered new interface driver usbtouchscreen
[ 1.839886] [HXTP] himax_hx83102_init
[ 1.839900] [HXTP] himax_hx83102_probe:Enter
[ 1.839914] [HXTP] Himax common touch panel driver init
[ 1.840609] .. rk pwm remotectl v2.0 init
[ 1.841069] input: fe6e0030.pwm as /devices/platform/fe6e0030.pwm/input/inpu0
[ 1.841751] remotectl-pwm fe6e0030.pwm: pwm version is 0x2130000
[ 1.841790] remotectl-pwm fe6e0030.pwm: IRQ index 1 not found
[ 1.841809] remotectl-pwm fe6e0030.pwm: cannot find PWR IRQ
[ 1.841826] remotectl-pwm fe6e0030.pwm: pwm sip wakeup config error!!
[ 1.841842] remotectl-pwm fe6e0030.pwm: Donot support ATF Wakeup
[ 1.843067] i2c /dev entries driver
[ 1.847686] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[ 1.849261] vdd_cpu: supplied by vcc5v0_sys
[ 1.859720] rk808 0-0020: chip id: 0x8090
[ 1.859839] rk808 0-0020: No cache defaults, reading back from HW
[ 1.883749] rk808 0-0020: source: on=0x10, off=0x00
[ 1.883805] rk808 0-0020: support dcdc3 fb mode:-22, 63
[ 1.883829] rk808 0-0020: support pmic reset mode:0,0
[ 1.890684] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.890823] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.890968] vdd_logic: supplied by vcc3v3_sys
[ 1.892107] vdd_gpu: supplied by vcc3v3_sys
[ 1.893155] vcc_ddr: supplied by vcc3v3_sys
[ 1.894284] vdd_npu: supplied by vcc3v3_sys
[ 1.895358] vcc_1v8: supplied by vcc3v3_sys
[ 1.896336] vdda0v9_image: supplied by vcc3v3_sys
[ 1.897907] vdda_0v9: supplied by vcc3v3_sys
[ 1.899462] vdda0v9_pmu: supplied by vcc3v3_sys
[ 1.901071] vccio_acodec: supplied by vcc3v3_sys
[ 1.902636] vccio_sd: supplied by vcc3v3_sys
[ 1.904258] vcc3v3_pmu: supplied by vcc3v3_sys
[ 1.905829] vcca_1v8: supplied by vcc3v3_sys
[ 1.907495] vcca1v8_pmu: supplied by vcc3v3_sys
[ 1.909071] vcca1v8_image: supplied by vcc3v3_sys
[ 1.910628] vcc_3v3: supplied by vcc3v3_sys
[ 1.911701] vcc3v3_sd: supplied by vcc3v3_sys
[ 1.912662] rk817-battery: Failed to locate of_node [id: -1]
[ 1.912932] rk817-battery rk817-battery: Failed to find matching dt id
[ 1.913099] rk817-charger: Failed to locate of_node [id: -1]
[ 1.913307] rk817-charger rk817-charger: Failed to find matching dt id
[ 1.916927] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-001
[ 1.917573] [E/HDF_LOG_TAG] SetInputDevAbility: match cached info failed
[ 1.924623] rk808-rtc rk808-rtc: registered as rtc0
[ 1.926490] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:28:13)
[ 1.930489] fusb302 0-0022: Can't get property of role, set role to default P
[ 1.940547] fusb302 0-0022: port 0 probe success with role ROLE_MODE_DRP, trE
[ 1.940851] input: Typec_Headphone as /devices/platform/fdd40000.i2c/i2c-0/02
[ 1.954140] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 1.955439] rtc-hym8563 5-0051: registered as rtc1
[ 1.961380] rkisp_hw fdff0000.rkisp: Adding to iommu group 6
[ 1.961761] rkisp_hw fdff0000.rkisp: is_thunderboot: 0
[ 1.961790] rkisp_hw fdff0000.rkisp: max input:0x0@0fps
[ 1.961841] rkisp_hw fdff0000.rkisp: can't request region for resource [mem ]
[ 1.963526] rkisp rkisp-vir0: rkisp driver version: v01.08.00
[ 1.963748] rkisp rkisp-vir0: No memory-region-thunderboot specified
[ 1.964170] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was no!
[ 1.964208] rkisp rkisp-vir0: Entity type for entity rkisp-csi-subdev was no!
[ 1.968905] usbcore: registered new interface driver uvcvideo
[ 1.968954] USB Video Class driver (1.1.1)
[ 1.973780] rockchip-thermal fe710000.tsadc: tsadc is probed successfully!
[ 1.976165] Bluetooth: HCI UART driver ver 2.3
[ 1.976214] Bluetooth: HCI UART protocol H4 registered
[ 1.976230] Bluetooth: HCI UART protocol ATH3K registered
[ 1.976353] usbcore: registered new interface driver bfusb
[ 1.976468] usbcore: registered new interface driver btusb
[ 1.976939] cpu cpu0: Failed to get cpu_leakage
[ 2.005566] cpu cpu0: temp=38333, pvtm=83601 (83653 + -52)
[ 2.009306] cpu cpu0: pvtm-volt-sel=1
[ 2.012426] cpu cpu0: avs=0
[ 2.013080] cpu cpu0: EM: created perf domain
[ 2.013371] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table0
[ 2.021670] sdhci: Secure Digital Host Controller Interface driver
[ 2.021721] sdhci: Copyright(c) Pierre Ossman
[ 2.021738] Synopsys Designware Multimedia Card Interface Driver
[ 2.023338] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.024126] dwmmc_rockchip fe000000.dwmmc: IDMAC supports 32-bit address mod.
[ 2.024231] dwmmc_rockchip fe000000.dwmmc: Using internal DMA controller.
[ 2.024257] dwmmc_rockchip fe000000.dwmmc: Version ID is 270a
[ 2.024264] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mod.
[ 2.024299] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.
[ 2.024326] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a
[ 2.024374] dwmmc_rockchip fe000000.dwmmc: DW MMC controller at irq 50,32 bio
[ 2.024403] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 58,32 bio
[ 2.025051] dwmmc_rockchip fe000000.dwmmc: allocated mmc-pwrseq
[ 2.025081] mmc_host mmc3: card is non-removable.
[ 2.026976] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: ffffffd
[ 2.027862] hid: raw HID events driver (C) Jiri Kosina
[ 2.028677] usbcore: registered new interface driver usbhid
[ 2.028698] usbhid: USB HID core driver
[ 2.029392] ashmem: initialized
[ 2.029751] zrhung hung_wp_screen_init start
[ 2.030350] zrhung hung_wp_screen_init done
[ 2.030669] random: fast init done
[ 2.031165] rockchip,bus bus-npu: Failed to get leakage
[ 2.031189] rockchip,bus bus-npu: pvtm = 83601, form pvtm_value
[ 2.031207] rockchip,bus bus-npu: pvtm-volt-sel=1
[ 2.031497] rockchip,bus bus-npu: avs=0
[ 2.036982] optee: probing for conduit method.
[ 2.037034] optee: revision 3.13 (48b7c13e)
[ 2.037685] optee: initialized driver
[ 2.038645] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz,)
[ 2.038721] rk817-codec rk817-codec: DMA mask not set
[ 2.039188] rk817-codec rk817-codec: got rk817-codec platform_device
[ 2.039848] [I/HDF_LOG_TAG] [rockchip_i2s_tdm_probe][line:206]: failed dmaDe
[ 2.041389] access_token_id: access_tokenid init success
[ 2.041711] Initializing XFRM netlink socket
[ 2.042221] NET: Registered protocol family 10
[ 2.043368] Segment Routing with IPv6
[ 2.043446] NET: Registered protocol family 17
[ 2.043474] NET: Registered protocol family 15
[ 2.043711] Bluetooth: RFCOMM socket layer initialized
[ 2.043760] Bluetooth: RFCOMM ver 1.11
[ 2.043781] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.043797] Bluetooth: HIDP socket layer initialized
[ 2.044106] [BT_RFKILL]: Enter rfkill_rk_init
[ 2.044118] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 2.044805] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 2.044865] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275s
[ 2.044877] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 2.044885] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by g.
[ 2.044933] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 124,.
[ 2.044948] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not foun!
[ 2.044957] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 2.044967] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[ 2.044976] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 2.045895] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts.
[ 2.045940] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset.
[ 2.045960] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
[ 2.045980] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
[ 2.046057] [BT_RFKILL]: Request irq for bt wakeup host
[ 2.046159] [BT_RFKILL]: ** disable irq
[ 2.046297] [BT_RFKILL]: bt_default device registered.
[ 2.046712] Key type dns_resolver registered
[ 2.048161] core_ctl: Creating CPU group 0
[ 2.048180] core_ctl: Init CPU0 state
[ 2.048189] core_ctl: Init CPU1 state
[ 2.048196] core_ctl: Init CPU2 state
[ 2.048203] core_ctl: Init CPU3 state
[ 2.049001] Loading compiled-in X.509 certificates
[ 2.049176] Key type ._fscrypt registered
[ 2.049190] Key type .fscrypt registered
[ 2.049198] Key type fscrypt-provisioning registered
[ 2.050579] pstore: Using crash dump compression: deflate
[ 2.051767] rga2: Driver loaded successfully ver:3.2.63318
[ 2.052202] rga2: Module initialized.
[ 2.054419] mmc0: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using A
[ 2.086136] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.089811] mali fde60000.gpu: Kernel DDK version g2p0-01eac0
[ 2.090151] mali fde60000.gpu: dev_pm_opp_set_regulators: no regulator (shad9
[ 2.090258] mali fde60000.gpu: Failed to get gpu_leakage
[ 2.090824] mali fde60000.gpu: avs=0
[ 2.090843] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_conf.
[ 2.091265] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
[ 2.091349] mali fde60000.gpu: No memory group manager is configured
[ 2.091981] mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h0
[ 2.092023] mali fde60000.gpu: Failed to get gpu_leakage
[ 2.092765] mali fde60000.gpu: Probed as mali0
[ 2.100950] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 2.101258] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus n5
[ 2.101393] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110
[ 2.101449] xhci-hcd xhci-hcd.3.auto: irq 90, io mem 0xfd000000
[ 2.101613] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101, bc0
[ 2.101625] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.101632] usb 2-1: Product: USB 2.0 Hub [MTT]
[ 2.101756] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, b0
[ 2.101766] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 2.101774] usb usb5: Product: xHCI Host Controller
[ 2.101781] usb usb5: Manufacturer: Linux 5.10.79 xhci-hcd
[ 2.101788] usb usb5: SerialNumber: xhci-hcd.3.auto
[ 2.102248] hub 5-0:1.0: USB hub found
[ 2.102263] hub 2-1:1.0: USB hub found
[ 2.102293] hub 5-0:1.0: 1 port detected
[ 2.102451] hub 2-1:1.0: 4 ports detected
[ 2.102561] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 2.102761] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus n6
[ 2.102778] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[ 2.102852] usb usb6: We don't know the algorithms for LPM for this host, di.
[ 2.102989] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, b0
[ 2.102999] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 2.103006] usb usb6: Product: xHCI Host Controller
[ 2.103013] usb usb6: Manufacturer: Linux 5.10.79 xhci-hcd
[ 2.103020] usb usb6: SerialNumber: xhci-hcd.3.auto
[ 2.103397] hub 6-0:1.0: USB hub found
[ 2.103434] hub 6-0:1.0: 1 port detected
[ 2.104285] input: adc-keys as /devices/platform/adc-keys/input/input3
[ 2.105233] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.105784] rk_iommu fde4b000.iommu: deferred probe timeout, ignoring dependy
[ 2.105803] rk_iommu: probe of fde4b000.iommu failed with error -110
[ 2.106089] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.106945] [dhd] dhd_module_init: in Dongle Host Driver, version 100.10.545)
[ 2.106958] [dhd] ======== dhd_wlan_init_plat_data ========
[ 2.106965] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 2.107019] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=118, oob_irq_4
[ 2.107026] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 2.107032] [dhd] dhd_wifi_platform_load: Enter
[ 2.107039] [dhd] Power-up adapter 'DHD generic adapter'
[ 2.107069] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 2.107078] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 2.107084] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 2.107091] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[ 2.107097] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
[ 2.112034] mmc0: new HS200 MMC card at address 0001
[ 2.112685] mmcblk0: mmc0:0001 TX2964 58.3 GiB
[ 2.112880] mmcblk0boot0: mmc0:0001 TX2964 partition 1 4.00 MiB
[ 2.113063] mmcblk0boot1: mmc0:0001 TX2964 partition 2 4.00 MiB
[ 2.113267] mmcblk0rpmb: mmc0:0001 TX2964 partition 3 4.00 MiB, chardev (237)
[ 2.116274]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 2.120461] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.147666] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz,)
[ 2.160850] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.192543] mmc3: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.194221] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.194558] devfreq fde60000.gpu: Couldn't update frequency transition infor.
[ 2.195909] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.198900] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.301043] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x3
[ 2.303667] mmc_host mmc3: Bus speed (slot 0) = 148500000Hz (slot req 150000)
[ 2.354542] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sis
[ 2.411047] [dhd] wifi_platform_bus_enumerate device present 1
[ 2.411132] [dhd] ======== Card detection to detect SDIO card! ========
[ 2.411161] sdio: host isn't  initialization successfully.
[ 2.500472] dwmmc_rockchip fe000000.dwmmc: Successfully tuned phase to 252
[ 2.511556] mmc3: new ultra high speed SDR104 SDIO card at address 0001
[ 2.514497] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.516472] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.532342] [dhd] bcmsdh_register: register client driver
[ 2.533081] [dhd] bcmsdh_sdmmc_probe: Enter num=1
[ 2.533874] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.534345] [dhd] bcmsdh_sdmmc_probe: Enter num=2
[ 2.534385] [dhd] bus num (host idx)=3, slot num (rca)=1
[ 2.534413] [dhd] found adapter info 'DHD generic adapter'
[ 2.534547] [dhd] sdioh_attach: set sd_f2_blocksize 256
[ 2.534655] [dhd] sdioh_attach: sd clock rate = 0
[ 2.535493] [dhd] dhdsdio_probe : no mutex held. set lock
[ 2.535767] [dhd] F1 signature read @0x18000000=0x1042aae8
[ 2.544497] [dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4
[ 2.546172] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x0
[ 2.546457] [dhd] dhd_conf_set_chiprev : devid=0xaae8, chip=0xaae8, chiprev=2
[ 2.549119] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[ 2.549213] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[ 2.549251] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[ 2.550513] [dhd] dhd_log_dump_init: kernel log buf size = 256KB; logdump_prB
[ 2.554015] [dhd] dhd_attach(): thread:dhd_watchdog_thread:cf started
[ 2.554860] [dhd] dhd_attach(): thread:dhd_dpc:d0 started
[ 2.555689] [dhd] dhd_attach(): thread:dhd_rxf:d1 started
[ 2.555781] [dhd] dhd_deferred_work_init: work queue initialized
[ 2.555832] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[ 2.556087] [dhd] get_mem_val_from_file: File [/data/misc/wifi/.memdump.infot
[ 2.556139] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[ 2.556188] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x1070
[ 2.609573] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 2.610484] [dhd] Dongle Host Driver, version 100.10.545.19 (r826445-2021031)
[ 2.612369] [dhd] Register interface [wlan0]  MAC: 10:2c:6b:7f:9c:4e
[ 2.612369]
[ 2.612876] [dhd] dhd_dbg_detach_pkt_monitor, 2100
[ 2.612929] [dhd] dhd_bus_devreset: == Power OFF ==
[ 2.614307] [dhd] dhd_bus_stop: making DHD_BUS_DOWN
[ 2.614537] [dhd] bcmsdh_oob_intr_unregister: Enter
[ 2.614574] [dhd] bcmsdh_oob_intr_unregister: irq is not registered
[ 2.614619] [dhd] dhd_bus_devreset: making dhdpub up FALSE
[ 2.614660] [dhd] dhd_txglom_enable: enable 0
[ 2.614688] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 2.614721] [dhd] dhd_bus_devreset:  WLAN OFF DONE
[ 2.614977] [dhd] wifi_platform_set_power = 0, delay: 0 msec
[ 2.615027] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
[ 2.615057] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 2.615084] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[ 2.615110] [WLAN_RFKILL]: wifi shut off power [GPIO-1-1]
[ 2.615139] [dhd] dhdsdio_probe : the lock is released.
[ 2.616156] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[ 2.617326] [dhd] dhd_module_init: Exit err=0
[ 2.619699] [I/osal_cdev] register hdf class success
[ 2.620554] [I/osal_cdev] add cdev dev_mgr success
[ 2.620554]
[ 2.621494] [I/osal_cdev] add cdev devsvc_mgr success
[ 2.621494]
[ 2.621547] [I/devmgr_service] start svcmgr result 0
[ 2.621591] [I/hcs_blob_if] CheckHcsBlobLength: the blobLength: 35660, byteA1
[ 2.623574] [I/device_node] launch devnode
[ 2.623620] [I/linux_gpio_adapter] LinuxGpioMatchProbe: find gpio chip(start)
[ 2.623846] [I/gpio_manager] GpioManagerAdd: start:0 count:32 added success
[ 2.623926] [I/linux_gpio_adapter] LinuxGpioMatchProbe: add gpio controller(d
[ 2.623959] [I/linux_gpio_adapter] LinuxGpioMatchProbe: find gpio chip(start)
[ 2.624284] [I/gpio_manager] GpioManagerAdd: start:32 count:32 added success
[ 2.624366] [I/linux_gpio_adapter] LinuxGpioMatchProbe: add gpio controller(d
[ 2.624398] [I/linux_gpio_adapter] LinuxGpioMatchProbe: find gpio chip(start)
[ 2.624596] [I/gpio_manager] GpioManagerAdd: start:64 count:32 added success
[ 2.624671] [I/linux_gpio_adapter] LinuxGpioMatchProbe: add gpio controller(d
[ 2.624706] [I/linux_gpio_adapter] LinuxGpioMatchProbe: find gpio chip(start)
[ 2.624900] [I/gpio_manager] GpioManagerAdd: start:96 count:32 added success
[ 2.624974] [I/linux_gpio_adapter] LinuxGpioMatchProbe: add gpio controller(d
[ 2.625007] [I/linux_gpio_adapter] LinuxGpioMatchProbe: find gpio chip(start)
[ 2.625204] [I/gpio_manager] GpioManagerAdd: start:128 count:32 added success
[ 2.625277] [I/linux_gpio_adapter] LinuxGpioMatchProbe: add gpio controller(d
[ 2.625309] [I/linux_gpio_adapter] LinuxGpioMatchProbe: find gpio chip(start)
[ 2.625371] [I/gpio_manager] GpioManagerAdd: start:511 count:1 added success
[ 2.625442] [I/linux_gpio_adapter] LinuxGpioMatchProbe: add gpio controller(d
[ 2.625474] [I/linux_gpio_adapter] LinuxGpioInit: dev service: init done!
[ 2.625544] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drC
[ 2.625587] [E/devhost_service_clnt] failed to install driver HDF_PLATFORM_M7
[ 2.625635] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drG
[ 2.625671] [E/devhost_service_clnt] failed to install driver HDF_PLATFORM_W7
[ 2.625715] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drC
[ 2.625751] [E/devhost_service_clnt] failed to install driver HDF_PLATFORM_R7
[ 2.625902] [I/device_node] launch devnode HDF_PLATFORM_UART_1
[ 2.625935] [I/hdf_uart_adapter] HdfUartBind: entry
[ 2.625968] [I/hdf_uart_adapter] HdfUartInit: entry
[ 2.626669] [I/osal_cdev] add cdev HDF_PLATFORM_UART_1 success
[ 2.626669]
[ 2.626865] [I/device_node] launch devnode HDF_PLATFORM_UART_0
[ 2.626904] [I/hdf_uart_adapter] HdfUartBind: entry
[ 2.626937] [I/hdf_uart_adapter] HdfUartInit: entry
[ 2.627201] [I/device_node] launch devnode HDF_PLATFORM_I2C_MANAGER
[ 2.627234] [I/i2c_core] I2cManagerBind: Enter!
[ 2.628177] [I/osal_cdev] add cdev HDF_PLATFORM_I2C_MANAGER success
[ 2.628177]
[ 2.628377] [I/device_node] launch devnode
[ 2.628400] [I/i2c_linux_adapter] LinuxI2cInit: Enter
[ 2.628426] [I/i2c_linux_adapter] LinuxI2cProbe: Enter
[ 2.628449] [I/i2c_core] I2cCntlrAdd: use default lock methods!
[ 2.628476] [I/i2c_linux_adapter] LinuxI2cProbe: i2c adapter 6 add success
[ 2.628498] [I/i2c_linux_adapter] LinuxI2cProbe: Enter
[ 2.628518] [I/i2c_core] I2cCntlrAdd: use default lock methods!
[ 2.628542] [I/i2c_linux_adapter] LinuxI2cProbe: i2c adapter 0 add success
[ 2.628568] [I/i2c_linux_adapter] LinuxI2cProbe: Enter
[ 2.628589] [I/i2c_core] I2cCntlrAdd: use default lock methods!
[ 2.628613] [I/i2c_linux_adapter] LinuxI2cProbe: i2c adapter 1 add success
[ 2.628635] [I/i2c_linux_adapter] LinuxI2cProbe: Enter
[ 2.628656] [I/i2c_core] I2cCntlrAdd: use default lock methods!
[ 2.628678] [I/i2c_linux_adapter] LinuxI2cProbe: i2c adapter 4 add success
[ 2.628699] [I/i2c_linux_adapter] LinuxI2cProbe: Enter
[ 2.628720] [I/i2c_core] I2cCntlrAdd: use default lock methods!
[ 2.628743] [I/i2c_linux_adapter] LinuxI2cProbe: i2c adapter 5 add success
[ 2.628766] [I/i2c_linux_adapter] LinuxI2cInit: done
[ 2.628872] [I/device_node] launch devnode HDF_PLATFORM_SPI_3
[ 2.628895] [I/HDF_SPI_LINUX_ADAPTER] HdfSpiDeviceBind: entry
[ 2.628920] [I/HDF_SPI_LINUX_ADAPTER] HdfSpiDeviceInit: entry
[ 2.629055] [I/device_node] launch devnode HDF_PLATFORM_SPI_2
[ 2.629080] [I/HDF_SPI_LINUX_ADAPTER] HdfSpiDeviceBind: entry
[ 2.629105] [I/HDF_SPI_LINUX_ADAPTER] HdfSpiDeviceInit: entry
[ 2.629223] [I/device_node] launch devnode HDF_PLATFORM_SPI_1
[ 2.629248] [I/HDF_SPI_LINUX_ADAPTER] HdfSpiDeviceBind: entry
[ 2.629273] [I/HDF_SPI_LINUX_ADAPTER] HdfSpiDeviceInit: entry
[ 2.629386] [I/device_node] launch devnode HDF_PLATFORM_SPI_0
[ 2.629410] [I/HDF_SPI_LINUX_ADAPTER] HdfSpiDeviceBind: entry
[ 2.629435] [I/HDF_SPI_LINUX_ADAPTER] HdfSpiDeviceInit: entry
[ 2.629501] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drO
[ 2.629532] [E/devhost_service_clnt] failed to install driver HDF_PLATFORM_M7
[ 2.629633] [I/device_node] launch devnode HDF_PLATFORM_PWM_4
[ 2.629655] [I/pwm_adapter] HdfPwmInit: entry
[ 2.629769] [I/device_node] launch devnode HDF_PLATFORM_PWM_3
[ 2.629792] [I/pwm_adapter] HdfPwmInit: entry
[ 2.629904] [I/device_node] launch devnode HDF_PLATFORM_PWM_2
[ 2.629928] [I/pwm_adapter] HdfPwmInit: entry
[ 2.630037] [I/device_node] launch devnode HDF_PLATFORM_PWM_1
[ 2.630061] [I/pwm_adapter] HdfPwmInit: entry
[ 2.630184] [I/device_node] launch devnode HDF_PLATFORM_PWM_0
[ 2.630210] [I/pwm_adapter] HdfPwmInit: entry
[ 2.630265] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drX
[ 2.630294] [E/devhost_service_clnt] failed to install driver HDF_MIPI_TX, r7
[ 2.630508] [I/device_node] launch devnode dma_service_0
[ 2.630557] [I/audio_core] [AudioSocRegisterPlatform][line:63]: Register [dm.
[ 2.630712] [I/device_node] launch devnode dsp_service_0
[ 2.630808] [I/rk3568_dsp_adapter] [DspDriverBind][line:51]: success
[ 2.630832] [I/rk3568_dsp_adapter] [DspDriverInit][line:58]: entry
[ 2.630865] [I/audio_core] [AudioSocRegisterDai][line:86]: Register [dsp_dai.
[ 2.630887] [I/audio_core] [AudioRegisterDsp][line:189]: Register [dsp_servi.
[ 2.630906] [I/rk3568_dsp_adapter] [DspDriverInit][line:80]: success
[ 2.630956] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load dr7
[ 2.630984] [E/devhost_service_clnt] failed to install driver codec_service_7
[ 2.631108] [I/device_node] launch devnode codec_service_0
[ 2.632126] [I/audio_core] [AudioSocRegisterDai][line:86]: Register [codec_d.
[ 2.632158] [I/audio_core] [AudioRegisterCodec][line:156]: Register [codec_s.
[ 2.632313] [I/device_node] launch devnode dai_service
[ 2.632898] [I/audio_core] [AudioSocRegisterDai][line:86]: Register [dai_ser.
[ 2.633060] [I/device_node] launch devnode hdf_audio_smartpa_dev0
[ 2.633092] [I/audio_host] [AudioDriverBind][line:354]: success.
[ 2.633564] [I/audio_host] [AudioPlatformDevInit][line:134]: success.
[ 2.633634] [I/audio_host] [AudioCpuDaiDevInit][line:255]: success.
[ 2.633660] [I/audio_host] [AudioCodecDevInit][line:74]: success.
[ 2.633681] [I/audio_host] [AudioCodecDaiDevInit][line:195]: success.
[ 2.633703] [I/audio_host] [AudioAccessoryDevInit][line:104]: success.
[ 2.633724] [I/audio_host] [AudioAccessoryDaiDevInit][line:225]: success.
[ 2.633744] [I/audio_host] [AudioDspDevInit][line:165]: success.
[ 2.633764] [I/audio_host] [AudioDspDaiDevInit][line:286]: success.
[ 2.633782] [I/audio_host] [AudioDriverInit][line:417]: success.
[ 2.634361] [I/osal_cdev] add cdev hdf_audio_smartpa_dev0 success
[ 2.634361]
[ 2.634539] [I/device_node] launch devnode hdf_audio_codec_dev0
[ 2.634571] [I/audio_host] [AudioDriverBind][line:354]: success.
[ 2.634797] [I/audio_host] [AudioPlatformDevInit][line:134]: success.
[ 2.634832] [I/audio_host] [AudioCpuDaiDevInit][line:255]: success.
[ 2.646836] [I/audio_host] [AudioCodecDevInit][line:74]: success.
[ 2.646871] [I/audio_host] [AudioCodecDaiDevInit][line:195]: success.
[ 2.646893] [I/audio_host] [AudioAccessoryDevInit][line:104]: success.
[ 2.646915] [I/audio_host] [AudioAccessoryDaiDevInit][line:225]: success.
[ 2.646935] [I/audio_host] [AudioDspDevInit][line:165]: success.
[ 2.646956] [I/audio_host] [AudioDspDaiDevInit][line:286]: success.
[ 2.646974] [I/audio_host] [AudioDriverInit][line:417]: success.
[ 2.647515] [I/osal_cdev] add cdev hdf_audio_codec_dev0 success
[ 2.647515]
[ 2.648096] [I/device_node] launch devnode hdf_audio_control
[ 2.648144] [I/audio_control_dispatch] [AudioControlBind][line:296]: success.
[ 2.648179] [I/audio_control_dispatch] [AudioControlInit][line:303]: success.
[ 2.648873] [I/osal_cdev] add cdev hdf_audio_control success
[ 2.648873]
[ 2.649210] [I/device_node] launch devnode hdf_audio_capture
[ 2.649255] [I/audio_stream_dispatch] [AudioStreamBind][line:1526]: success!
[ 2.649289] [I/audio_stream_dispatch] [AudioStreamInit][line:1546]: Success!
[ 2.649918] [I/osal_cdev] add cdev hdf_audio_capture success
[ 2.649918]
[ 2.650218] [I/device_node] launch devnode hdf_audio_render
[ 2.650262] [I/audio_stream_dispatch] [AudioStreamBind][line:1526]: success!
[ 2.650297] [I/audio_stream_dispatch] [AudioStreamInit][line:1546]: Success!
[ 2.650871] [I/osal_cdev] add cdev hdf_audio_render success
[ 2.650871]
[ 2.651175] [I/device_node] launch devnode hdf_light
[ 2.652696] [I/osal_cdev] add cdev hdf_light success
[ 2.652696]
[ 2.653039] [I/device_node] launch devnode hdf_misc_vibrator
[ 2.654747] [I/osal_cdev] add cdev hdf_misc_vibrator success
[ 2.654747]
[ 2.655052] [I/device_node] launch devnode hdf_misc_linear_vibrator
[ 2.655437] [I/device_node] launch devnode hdf_usb_pnp_notify_service
[ 2.655474] [I/USB_PNP_NOTIFY] UsbPnpNotifyBind: Enter!
[ 2.655505] [I/USB_PNP_NOTIFY] UsbPnpNotifyInit: Enter!
[ 2.657819] [I/osal_cdev] add cdev hdf_usb_pnp_notify_service success
[ 2.657819]
[ 2.658234] [I/device_node] launch devnode hdf_sensor_manager_ap
[ 2.658284] [I/hdf_sensor_commom] InitSensorDevManager: init sensor manager y
[ 2.659070] [I/osal_cdev] add cdev hdf_sensor_manager_ap success
[ 2.659070]
[ 2.659318] [I/device_node] launch devnode sensor_accel
[ 2.660241] [I/hdf_sensor_accel_driver] AccelInitDriver: Init accel driver ss
[ 2.660495] [I/device_node] launch devnode hdf_accel_mxc6655xa
[ 2.660924] [E/hdf_sensor_commom] ReadSensor: i2c[5] read failed
[ 2.660967] [E/hdf_sensor_commom] DetectSensorDevice: i2c read chip id failed
[ 2.661002] [I/hdf_sensor_accel_driver] AccelCreateCfgData: Accel sensor dett
[ 2.661057] [I/device_node] release devnode hdf_accel_mxc6655xa
[ 2.661091] [E/hdf_sensor_commom] DeleteSensorDevice: delete sensor id invala
[ 2.661132] [E/devmgr_service] devmgr detach device 4000301 not found
[ 2.661175] [E/devhost_service_clnt] failed to install driver hdf_accel_mxc64
[ 2.661293] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drI
[ 2.661338] [E/devhost_service_clnt] failed to install driver hdfwifi, ret =7
[ 2.661657] [I/device_node] launch devnode hdf_input_host
[ 2.661690] [I/HDF_LOG_TAG] HdfInputManagerInit: enter
[ 2.661725] [I/HDF_LOG_TAG] HdfInputManagerInit: exit succ
[ 2.662612] [I/osal_cdev] add cdev hdf_input_host success
[ 2.662612]
[ 2.662822] [I/device_node] launch devnode hdf_input_event1
[ 2.662860] [I/HDF_LOG_TAG] HdfTouchDriverProbe: enter
[ 2.662963] [I/HDF_LOG_TAG] HdfTouchDriverRegisterPowerListener::enter!
[ 2.663010] [I/HDF_LOG_TAG] HdfTouchDriverRegisterPowerListener:register pow0
[ 2.663040] [I/HDF_LOG_TAG] HdfTouchDriverProbe: main_touch exit succ
[ 2.663724] [I/osal_cdev] add cdev hdf_input_event1 success
[ 2.663724]
[ 2.663932] [I/device_node] launch devnode hdf_touch_gt911_service
[ 2.663968] [I/HDF_INPUT_DRV] HdfGoodixChipInit: enter
[ 2.664174] [I/HDF_LOG_TAG] ChipMatchCheck: boardNode's father name = touch00
[ 3.058194] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 3.058290] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 3.058326] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 3.164835] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 3.164920] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 3.164959] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 19 time
[ 3.314396] rk-pcie 3c0800000.pcie: PCIe Link up, LTSSM is 0x230011
[ 3.314961] rk-pcie 3c0800000.pcie: PCI host bridge to bus 0002:20
[ 3.315019] pci_bus 0002:20: root bus resource [bus 20-2f]
[ 3.315067] pci_bus 0002:20: root bus resource [??? 0x380000000-0x3807fffff )
[ 3.315109] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus add)
[ 3.315150] pci_bus 0002:20: root bus resource [mem 0x380900000-0x3bfffffff])
[ 3.315272] pci 0002:20:00.0: [1d87:3566] type 01 class 0x060400
[ 3.315338] pci 0002:20:00.0: reg 0x10: [mem 0x00000000-0x3fffffff]
[ 3.315386] pci 0002:20:00.0: reg 0x14: [mem 0x00000000-0x3fffffff]
[ 3.315432] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 3.315611] pci 0002:20:00.0: supports D1 D2
[ 3.315650] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[ 3.318385] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 3.318447] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 3.318480] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 3.333437] pci 0002:20:00.0: Primary bus is hard wired to 0
[ 3.333564] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reg
[ 3.334315] pci 0002:21:00.0: [1e49:1013] type 00 class 0x010802
[ 3.334562] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 3.335909] pci 0002:21:00.0: 15.752 Gb/s available PCIe bandwidth, limited )
[ 3.361106] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[ 3.361336] pci 0002:20:00.0: BAR 0: no space for [mem size 0x40000000]
[ 3.361383] pci 0002:20:00.0: BAR 0: failed to assign [mem size 0x40000000]
[ 3.361429] pci 0002:20:00.0: BAR 1: no space for [mem size 0x40000000]
[ 3.361463] pci 0002:20:00.0: BAR 1: failed to assign [mem size 0x40000000]
[ 3.361502] pci 0002:20:00.0: BAR 8: assigned [mem 0x380900000-0x3809fffff]
[ 3.361541] pci 0002:20:00.0: BAR 6: assigned [mem 0x380a00000-0x380a0ffff p]
[ 3.361605] pci 0002:21:00.0: BAR 0: assigned [mem 0x380900000-0x380903fff 6]
[ 3.361744] pci 0002:20:00.0: PCI bridge to [bus 21]
[ 3.361790] pci 0002:20:00.0: bridge window [mem 0x380900000-0x3809fffff]
[ 3.424510] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 3.424548] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 3.424562] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 18 time
[ 3.577664] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 3.577685] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 3.577692] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 3.684361] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 3.684380] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 3.684388] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 17 time
[ 3.837659] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 3.837677] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 3.837685] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 3.944325] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 3.944342] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 3.944350] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 16 time
[ 4.097693] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 4.097711] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 4.097719] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 4.204323] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 4.204341] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 4.204350] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 15 time
[ 4.357669] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 4.357689] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 4.357696] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 4.464323] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 4.464341] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 4.464348] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 14 time
[ 4.617653] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 4.617671] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 4.617679] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 4.724356] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 4.724374] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 4.724382] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 13 time
[ 4.826329] ITS queue timeout (416 385)
[ 4.826353] ITS cmd its_build_mapd_cmd failed
[ 4.877706] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 4.877727] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 4.877734] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 4.984324] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 4.984341] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 4.984349] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 12 time
[ 5.137666] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 5.137684] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 5.137691] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 5.140774] vendor storage:20190527 ret = -1
[ 5.244358] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 5.244376] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 5.244384] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 11 time
[ 5.397655] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 5.397672] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 5.397680] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 5.504322] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 5.504341] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 5.504349] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 10 time
[ 5.657653] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 5.657672] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 5.657679] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 5.764356] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 5.764375] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 5.764383] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 9 time
[ 5.917653] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 5.917672] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 5.917679] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 6.024355] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 6.024374] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 6.024381] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 8 time
[ 6.177656] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 6.177675] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 6.177682] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 6.284321] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 6.284338] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 6.284346] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 7 time
[ 6.289552] ITS queue timeout (480 385)
[ 6.289575] ITS cmd its_build_mapti_cmd failed
[ 6.437688] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 6.437706] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 6.437713] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 6.544320] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 6.544338] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 6.544346] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 6 time
[ 6.697689] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 6.697708] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 6.697715] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 6.804321] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 6.804339] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 6.804347] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 5 time
[ 6.957651] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 6.957670] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 6.957677] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 7.064333] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 7.064351] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 7.064359] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 4 time
[ 7.217691] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 7.217710] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 7.217718] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 7.324320] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 7.324337] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 7.324346] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 3 time
[ 7.477667] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 7.477685] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 7.477692] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 7.584342] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 7.584359] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 7.584367] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 2 time
[ 7.737653] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 7.737671] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 7.737679] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 7.752002] ITS queue timeout (544 385)
[ 7.752020] ITS cmd its_build_mapti_cmd failed
[ 7.844356] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 7.844374] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 7.844382] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 1 time
[ 7.997686] [E/HDF_LOG_TAG] InputI2cWrite: i2c write err
[ 7.997705] [E/HDF_LOG_TAG] SetResetStatus: InputI2cWrite failed, ret = -1
[ 7.997713] [E/HDF_LOG_TAG] SetPowerOnTiming: SetResetStatus failed
[ 8.104355] [E/HDF_LOG_TAG] InputI2cRead: i2c read err
[ 8.104373] [E/HDF_INPUT_DRV] ChipDetect: read chip version failed
[ 8.104381] [I/HDF_LOG_TAG] ChipCheckResetRetry: reset chip 0 time
[ 8.104396] [I/device_node] release devnode hdf_touch_gt911_service
[ 8.104404] [I/HDF_INPUT_DRV] HdfGoodixChipRelease: goodix chip is release
[ 8.104415] [E/devmgr_service] devmgr detach device 2000301 not found
[ 8.104426] [E/devhost_service_clnt] failed to install driver hdf_touch_gt914
[ 8.104538] [I/device_node] launch devnode
[ 8.104546] [I/HDF_LOG_TAG] RegisterInputDevice: enter
[ 8.104555] [I/HDF_LOG_TAG] CreateDeviceNode: prepare to register hdf device
[ 8.104571] [I/device_node] launch devnode
[ 8.104850] [I/osal_cdev] add cdev hdf_input_event2 success
[ 8.104850]
[ 8.104872] [I/HDF_LOG_TAG] HidRegisterHdfDevice: svcName is hdf_input_eventy
[ 8.104880] [I/HDF_LOG_TAG] CreateDeviceNode: create node succ, devId is 2
[ 8.104898] [E/HDF_LOG_TAG] HotPlugNotify: send event failed
[ 8.104907] [I/HDF_LOG_TAG] RegisterInputDevice: exit succ, devCount is 1
[ 8.104960] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drE
[ 8.104970] [E/devhost_service_clnt] failed to install driver , ret = -207
[ 8.104979] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load dr0
[ 8.104987] [E/devhost_service_clnt] failed to install driver , ret = -207
[ 8.104996] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drP
[ 8.105003] [E/devhost_service_clnt] failed to install driver , ret = -207
[ 8.105012] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drP
[ 8.105019] [E/devhost_service_clnt] failed to install driver hdf_disp, ret 7
[ 8.105028] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drL
[ 8.105035] [E/devhost_service_clnt] failed to install driver , ret = -207
[ 8.105183] [I/device_node] launch devnode pm_test_service
[ 8.105190] [I/pm_driver_test] HdfPmDriverBind enter
[ 8.105197] [I/pm_driver_test] HdfPmDriverInit enter!
[ 8.105209] [I/pm_driver_test] HdfPmDriverInit register power listener, ret 0
[ 8.105429] [I/osal_cdev] add cdev pm_test_service success
[ 8.105429]
[ 8.105521] [I/device_node] launch devnode sample_service
[ 8.105533] [I/sample_driver_test] HdfSampleDriverInit::enter!
[ 8.105549] [I/sample_driver_test] HdfSampleDriverInit:register power listen0
[ 8.105734] [I/osal_cdev] add cdev sample_service success
[ 8.105734]
[ 8.105812] [I/device_node] launch devnode HDF_TEST
[ 8.105996] [I/osal_cdev] add cdev HDF_TEST success
[ 8.105996]
[ 8.106073] [I/device_node] launch devnode
[ 8.106275] [I/hdf_sensor_commom] AddSensorDevice: register sensor name[senss
[ 8.106285] [I/hdf_sensor_test_c] InitSensorDriverTest: init sensor test dris
[ 8.106340] [I/device_node] launch devnode UART_TEST
[ 8.106372] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drT
[ 8.106381] [E/devhost_service_clnt] failed to install driver PLATFORM_MIPI_7
[ 8.106389] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drT
[ 8.106396] [E/devhost_service_clnt] failed to install driver SDIO_TEST, ret7
[ 8.106404] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drT
[ 8.106411] [E/devhost_service_clnt] failed to install driver EMMC_TEST, ret7
[ 8.106454] [I/device_node] launch devnode SPI_TEST
[ 8.106508] [I/device_node] launch devnode I2C_TEST
[ 8.106644] [I/osal_cdev] add cdev I2C_TEST success
[ 8.106644]
[ 8.106695] [I/device_node] launch devnode GPIO_TEST
[ 8.106706] [E/hcs_tree_if] HcsGetUint16 failed, the attr of testUserApi is e
[ 8.106714] [W/HDF_LOG_TAG] GpioTestReadConfig: read gpioIrq fail, using 0 at
[ 8.106732] [I/HDF_LOG_TAG] HdfDriverManagerGetDriver:try to dynamic load drT
[ 8.106740] [E/devhost_service_clnt] failed to install driver WATCHDOG_TEST,7
[ 8.106782] [I/device_node] launch devnode PWM_TEST
[ 8.106820] [I/hdf_power_manager] HdfPmTaskQueueInit HdfTaskQueueCreate succs
[ 8.106853] cfg80211: Loading compiled-in X.509 certificates for regulatory e
[ 8.108693] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.108763] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linu.
[ 8.109240] Mali:
[ 8.109244] Mali device driver loaded
[ 8.109264] rkisp rkisp-vir0: clear unready subdev num: 4
[ 8.109274] rockchip-csi2-dphy0: No link between dphy and sensor
[ 8.109464] platform regulatory.0: Direct firmware load for regulatory.db fa2
[ 8.109476] cfg80211: failed to load regulatory.db
[ 8.109903] rockchip-csi2-dphy0: No link between dphy and sensor
[ 8.109912] rkisp-vir0: update sensor failed
[ 8.114253] Freeing unused kernel memory: 6080K
[ 9.214618] ITS queue timeout (608 385)
[ 9.214647] ITS cmd its_build_mapti_cmd failed
[ 10.677253] ITS queue timeout (672 385)
[ 10.677271] ITS cmd its_build_mapti_cmd failed
[ 12.139871] ITS queue timeout (736 385)
[ 12.139889] ITS cmd its_build_mapti_cmd failed
[ 13.602488] ITS queue timeout (800 385)
[ 13.602505] ITS cmd its_build_mapti_cmd failed
[ 15.065099] ITS queue timeout (864 385)
[ 15.065116] ITS cmd its_build_mapti_cmd failed
[ 16.527725] ITS queue timeout (928 385)
[ 16.527742] ITS cmd its_build_mapti_cmd failed
[ 17.990318] ITS queue timeout (992 385)
[ 17.990336] ITS cmd its_build_mapti_cmd failed
[ 19.452951] ITS queue timeout (1056 385)
[ 19.452969] ITS cmd its_build_mapti_cmd failed
[ 20.915562] ITS queue timeout (1120 385)
[ 20.915581] ITS cmd its_build_mapti_cmd failed
[ 22.378169] ITS queue timeout (1184 385)
[ 22.378186] ITS cmd its_build_mapti_cmd failed
[ 23.840785] ITS queue timeout (1248 385)
[ 23.840803] ITS cmd its_build_mapti_cmd failed
[ 25.303395] ITS queue timeout (1312 385)
[ 25.303412] ITS cmd its_build_mapti_cmd failed
[ 26.766006] ITS queue timeout (1376 385)
[ 26.766023] ITS cmd its_build_mapti_cmd failed
[ 28.228637] ITS queue timeout (1440 385)
[ 28.228655] ITS cmd its_build_mapti_cmd failed
[ 29.691244] ITS queue timeout (1504 385)
[ 29.691262] ITS cmd its_build_mapti_cmd failed
[ 31.153868] ITS queue timeout (1568 385)
[ 31.153886] ITS cmd its_build_mapti_cmd failed
[ 32.616493] ITS queue timeout (1632 385)
[ 32.616510] ITS cmd its_build_mapti_cmd failed
[ 34.079115] ITS queue timeout (1696 385)
[ 34.079133] ITS cmd its_build_mapti_cmd failed
[ 34.597436] random: crng init done
[ 35.541761] ITS queue timeout (1760 385)
[ 35.541778] ITS cmd its_build_mapti_cmd failed
[ 37.004374] ITS queue timeout (1824 385)
[ 37.004391] ITS cmd its_build_mapti_cmd failed
[ 38.467009] ITS queue timeout (1888 385)
[ 38.467026] ITS cmd its_build_mapti_cmd failed
[ 38.887467] vcc3v3_lcd0_n: disabling
[ 38.887486] vcc3v3_lcd1_n: disabling
[ 39.929599] ITS queue timeout (1952 385)
[ 39.929617] ITS cmd its_build_mapti_cmd failed
[ 41.392232] ITS queue timeout (2016 385)
[ 41.392249] ITS cmd its_build_mapti_cmd failed
[ 42.854850] ITS queue timeout (2080 385)
[ 42.854867] ITS cmd its_build_mapti_cmd failed
[ 44.317476] ITS queue timeout (2144 385)
[ 44.317494] ITS cmd its_build_mapti_cmd failed
[ 45.780092] ITS queue timeout (2208 385)
[ 45.780109] ITS cmd its_build_mapti_cmd failed
[ 47.242723] ITS queue timeout (2272 385)
[ 47.242740] ITS cmd its_build_mapti_cmd failed
[ 48.705349] ITS queue timeout (2336 385)
[ 48.705366] ITS cmd its_build_mapti_cmd failed
[ 50.167986] ITS queue timeout (2400 385)
[ 50.168004] ITS cmd its_build_mapti_cmd failed
[ 51.630587] ITS queue timeout (2464 385)
[ 51.630605] ITS cmd its_build_mapti_cmd failed
[ 53.093439] ITS queue timeout (2528 385)
[ 53.093461] ITS cmd its_build_discard_cmd failed
[ 54.556203] ITS queue timeout (2592 385)
[ 54.556221] ITS cmd its_build_discard_cmd failed
[ 56.018948] ITS queue timeout (2656 385)
[ 56.018967] ITS cmd its_build_discard_cmd failed
[ 57.481708] ITS queue timeout (2720 385)
[ 57.481726] ITS cmd its_build_discard_cmd failed
[ 58.944474] ITS queue timeout (2784 385)
[ 58.944491] ITS cmd its_build_discard_cmd failed
[ 60.407211] ITS queue timeout (2848 385)
[ 60.407228] ITS cmd its_build_discard_cmd failed
[ 61.869953] ITS queue timeout (2912 385)
[ 61.869971] ITS cmd its_build_discard_cmd failed
[ 63.332699] ITS queue timeout (2976 385)
[ 63.332717] ITS cmd its_build_discard_cmd failed
[ 64.795476] ITS queue timeout (3040 385)
[ 64.795493] ITS cmd its_build_discard_cmd failed
[ 66.258236] ITS queue timeout (3104 385)
[ 66.258253] ITS cmd its_build_discard_cmd failed
[ 67.721009] ITS queue timeout (3168 385)
[ 67.721028] ITS cmd its_build_discard_cmd failed
[ 69.183760] ITS queue timeout (3232 385)
[ 69.183778] ITS cmd its_build_discard_cmd failed
[ 70.646533] ITS queue timeout (3296 385)
[ 70.646552] ITS cmd its_build_discard_cmd failed
[ 72.109285] ITS queue timeout (3360 385)
[ 72.109303] ITS cmd its_build_discard_cmd failed
[ 73.572050] ITS queue timeout (3424 385)
[ 73.572069] ITS cmd its_build_discard_cmd failed
[ 75.034809] ITS queue timeout (3488 385)
[ 75.034827] ITS cmd its_build_discard_cmd failed
[ 76.497544] ITS queue timeout (3552 385)
[ 76.497562] ITS cmd its_build_discard_cmd failed
[ 77.960305] ITS queue timeout (3616 385)
[ 77.960322] ITS cmd its_build_discard_cmd failed
[ 79.423075] ITS queue timeout (3680 385)
[ 79.423092] ITS cmd its_build_discard_cmd failed
[ 80.885834] ITS queue timeout (3744 385)
[ 80.885851] ITS cmd its_build_discard_cmd failed
[ 82.348606] ITS queue timeout (3808 385)
[ 82.348624] ITS cmd its_build_discard_cmd failed
[ 83.811358] ITS queue timeout (3872 385)
[ 83.811376] ITS cmd its_build_discard_cmd failed
[ 85.274143] ITS queue timeout (3936 385)
[ 85.274160] ITS cmd its_build_discard_cmd failed
[ 86.736878] ITS queue timeout (4000 385)
[ 86.736896] ITS cmd its_build_discard_cmd failed
[ 88.199629] ITS queue timeout (4064 385)
[ 88.199647] ITS cmd its_build_discard_cmd failed
[ 89.662381] ITS queue timeout (4128 385)
[ 89.662399] ITS cmd its_build_discard_cmd failed
[ 91.125140] ITS queue timeout (4192 385)
[ 91.125158] ITS cmd its_build_discard_cmd failed
[ 92.587909] ITS queue timeout (4256 385)
[ 92.587928] ITS cmd its_build_discard_cmd failed
[ 94.050653] ITS queue timeout (4320 385)
[ 94.050672] ITS cmd its_build_discard_cmd failed
[ 95.513422] ITS queue timeout (4384 385)
[ 95.513440] ITS cmd its_build_discard_cmd failed
[ 96.976202] ITS queue timeout (4448 385)
[ 96.976220] ITS cmd its_build_discard_cmd failed
[ 98.438958] ITS queue timeout (4512 385)
[ 98.438977] ITS cmd its_build_discard_cmd failed
[ 99.901869] ITS queue timeout (4544 385)
[ 99.901887] ITS cmd its_build_mapd_cmd failed
[ 99.907522] Run /init as init process
[ 99.912346] [pid=1][INIT][ERROR] [ueventd.c:297)] Failed get default_boot_dee
Error obtaining file context handle: No such file or directory
[  100.545163] EXT4-fs (mmcblk0p5): mounted filesystem without journal. Opts: b1
[  100.545291] BEGET[pid=1][INIT][ERROR] [fstab_mount.c:299)] Unsupported file "
[  101.051513] EXT4-fs (mmcblk0p6): mounted filesystem without journal. Opts: b1
[  101.053341] ------------[ cut here ]------------
[  101.053374] mem_cgroup_update_lru_size(00000000b361acb8, 4, -1): lru_size -1
[  101.053403] WARNING: CPU: 2 PID: 1 at mm/memcontrol.c:1433 mem_cgroup_update0
[  101.053410] Modules linked in:
[  101.053422] CPU: 2 PID: 1 Comm: init Not tainted 5.10.79 #1
[  101.053428] Hardware name: Firefly RK3568-ROC-PC HDMI (Linux) (DT)
[  101.053437] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[  101.053443] pc : mem_cgroup_update_lru_size+0xb4/0xe0
[  101.053450] lr : mem_cgroup_update_lru_size+0xb4/0xe0
[  101.053455] sp : ffffffc011ebb9b0
[  101.053460] x29: ffffffc011ebb9b0 x28: ffffffc011d61f00
[  101.053470] x27: ffffff8100244800 x26: ffffffff03e84588
[  101.053479] x25: 0000000000000000 x24: 0000000000000002
[  101.053488] x23: 0000000000000000 x22: 0000000000000004
[  101.053497] x21: ffffff8100244800 x20: 00000000ffffffff
[  101.053506] x19: ffffff8100244870 x18: 000000000000000a
[  101.053514] x17: 0000000000000000 x16: 0000000000000000
[  101.053523] x15: 000000000000d07e x14: 312d20657a69735f
[  101.053532] x13: 75726c203a29312d x12: 202c34202c386263
[  101.053541] x11: 6131363362303030 x10: 303030303028657a
[  101.053550] x9 : 69735f75726c5f65 x8 : 74616470755f7075
[  101.053559] x7 : 6f7267635f6d656d x6 : ffffffc011bc71f8
[  101.053569] x5 : c0000000ffffdfff x4 : ffffffc011b971b8
[  101.053578] x3 : 0000000000000000 x2 : 0000000000000000
[  101.053587] x1 : 9f6e7c246d774400 x0 : 0000000000000000
[  101.053597] Call trace:
[  101.053605]  mem_cgroup_update_lru_size+0xb4/0xe0
[  101.053614]  release_pages+0x250/0x2a8
[  101.053622]  __pagevec_release+0x38/0x48
[  101.053629]  pagevec_release+0x14/0x20
[  101.053635]  truncate_inode_pages_range+0x2f4/0x3fc
[  101.053642]  truncate_inode_pages+0x2c/0x38
[  101.053649]  truncate_inode_pages_final+0x64/0x70
[  101.053657]  evict+0x148/0x174
[  101.053663]  iput+0x18c/0x1c4
[  101.053671]  do_unlinkat+0x10c/0x1fc
[  101.053678]  __arm64_sys_unlinkat+0x58/0x64
[  101.053685]  el0_svc_common.constprop.5+0x100/0x184
[  101.053692]  do_el0_svc_compat+0x2c/0x3c
[  101.053700]  el0_svc_compat+0x1c/0x28
[  101.053706]  el0_sync_compat_handler+0xc4/0xf4
[  101.053713]  el0_sync_compat+0x14c/0x180
[  101.053719] ---[ end trace 567c53344b1824c2 ]---
[  101.053993] [pid=1][INIT][ERROR] [switch_root.c:69)] Failed to unlink init, 0
[  101.089185] [pid=1][INIT][ERROR] [init_group_manager.c:189)] Failed to get bp
[  101.095275] PARAM[pid=1][INIT][ERROR] [param_service.c:722)] Can not find arp
[  101.364425] ITS queue timeout (4576 385)
[  101.364460] ITS cmd its_build_mapd_cmd failed
[  102.827122] ITS queue timeout (4640 385)
[  102.827158] ITS cmd its_build_mapti_cmd failed
[  104.289454] ITS queue timeout (4704 385)
[  104.289473] ITS cmd its_build_mapti_cmd failed
[  105.751760] ITS queue timeout (4768 385)
[  105.751778] ITS cmd its_build_mapti_cmd failed
[  107.214051] ITS queue timeout (4832 385)
[  107.214068] ITS cmd its_build_mapti_cmd failed
[  108.676335] ITS queue timeout (4896 385)
[  108.676352] ITS cmd its_build_mapti_cmd failed
[  110.138637] ITS queue timeout (4960 385)
[  110.138655] ITS cmd its_build_mapti_cmd failed
[  111.600934] ITS queue timeout (5024 385)
[  111.600951] ITS cmd its_build_mapti_cmd failed
[  113.063212] ITS queue timeout (5088 385)
[  113.063229] ITS cmd its_build_mapti_cmd failed
[  114.525493] ITS queue timeout (5152 385)
[  114.525512] ITS cmd its_build_mapti_cmd failed
[  114.533586] SELinux:  Permission perfmon in class capability2 not defined in.
[  114.533634] SELinux:  Permission bpf in class capability2 not defined in pol.
[  114.533642] SELinux:  Permission checkpoint_restore in class capability2 not.
[  114.533665] SELinux:  Permission perfmon in class cap2_userns not defined in.
[  114.533671] SELinux:  Permission bpf in class cap2_userns not defined in pol.
[  114.533677] SELinux:  Permission checkpoint_restore in class cap2_userns not.
[  114.533777] SELinux:  Class perf_event not defined in policy.
[  114.533782] SELinux:  Class lockdown not defined in policy.
[  114.533788] SELinux: the above unknown classes and permissions will be denied
[  114.540066] SELinux:  policy capability network_peer_controls=1
[  114.540091] SELinux:  policy capability open_perms=1
[  114.540097] SELinux:  policy capability extended_socket_class=1
[  114.540103] SELinux:  policy capability always_check_network=0
[  114.540109] SELinux:  policy capability cgroup_seclabel=0
[  114.540114] SELinux:  policy capability nnp_nosuid_transition=0
[  114.540119] SELinux:  policy capability genfs_seclabel_symlinks=0
[  115.984171] ITS queue timeout (5216 385)
[  115.984201] ITS cmd its_build_inv_cmd failed
[  115.984400] pcieport 0002:20:00.0: PME: Signaling with IRQ 128
[  115.984835] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[  115.985481] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[  115.986293] audit: type=1400 audit(1501925407.556:2): avc:  denied  { search1
[  115.986312] audit: type=1400 audit(1501925407.556:3): avc:  denied  { write 1
[  115.986321] audit: type=1400 audit(1501925407.556:4): avc:  denied  { add_na1
[  115.986329] audit: type=1400 audit(1501925407.556:5): avc:  denied  { create1
[  115.986337] audit: type=1400 audit(1501925407.556:6): avc:  denied  { associ1
[  115.986390] audit: type=1400 audit(1501925407.556:7): avc:  denied  { setatt1
[  115.986471] nvme nvme0: pci function 0002:21:00.0
[  115.986550] nvme 0002:21:00.0: enabling device (0000 -> 0002)
[  115.986789] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[  117.448746] ITS queue timeout (5248 385)
[  117.448775] ITS cmd its_build_mapd_cmd failed
[  118.911530] ITS queue timeout (5312 385)
[  118.911555] ITS cmd its_build_mapti_cmd failed
[  120.372445] ITS queue timeout (5376 385)
[  120.372465] ITS cmd its_build_inv_cmd failed
[  120.404196] audit: type=1403 audit(1501925411.976:8): auid=4294967295 ses=421
[  120.404367] audit: type=1400 audit(1501925411.976:9): avc:  denied  { search1
[  120.404483] audit: type=1400 audit(1501925411.976:10): avc:  denied  { searc1
[  120.404496] audit: type=1400 audit(1501925411.976:11): avc:  denied  { read 1
[  120.421541] [pid=1][INIT][ERROR] [init_utils.c:368)] Read dir :/system/etc/p2
[  120.421600] [pid=1][INIT][ERROR] [init_utils.c:368)] Read dir :/system/etc/p2
[  120.421712] [pid=1][INIT][ERROR] [init_utils.c:368)] Read dir :/vendor/etc/p2
[  120.421743] [pid=1][INIT][ERROR] [init_utils.c:368)] Read dir :/vendor/etc/p2
[  120.422478] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramt
[  120.422498] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422512] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pt
[  120.422544] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramg
[  120.422559] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422572] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pg
[  120.422590] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramg
[  120.422603] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422615] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pg
[  120.422714] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramn
[  120.422730] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422744] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pn
[  120.422761] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramn
[  120.422774] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422788] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pn
[  120.422804] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramn
[  120.422817] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422830] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pn
[  120.422846] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramn
[  120.422859] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422872] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pn
[  120.422888] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramn
[  120.422901] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422914] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pn
[  120.422930] PARAM[pid=1][INIT][ERROR] [param_service.c:107)] Read-only paramn
[  120.422942] PARAM[pid=1][INIT][ERROR] [param_service.c:124)] Invalid param ve
[  120.422955] PARAM[pid=1][INIT][ERROR] [param_service.c:643)] Failed to set pn
[  120.429676] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.429997] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.430157] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.430306] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.431454] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.433173] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.433362] [pid=1][INIT][ERROR] [init_config.c:47)] Failed to read file cong
[  120.434502] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.434637] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.435080] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.435605] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.436103] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.436605] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.436721] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.436825] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:277)] Command itey
[  120.437259] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.437918] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.438448] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.438910] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.439029] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.439436] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.439547] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.439945] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.440403] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.441017] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.441561] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.441995] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.442114] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.442471] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.442554] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.442948] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.443036] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.443424] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.443568] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.443919] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.444168] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.444535] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.444978] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.445092] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.445422] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.445532] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.445934] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.446501] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.446674] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.447738] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.447856] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.448563] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.448683] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.449034] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.449145] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.449585] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.450147] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.450260] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.450610] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.451147] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.451308] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.451386] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.451943] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.452402] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.452514] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.452853] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.453329] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.453825] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.453958] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.454162] [pid=1][INIT][ERROR] [init_config.c:42)] ParseInitCfg /system/ett
[  120.454545] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.455059] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.455218] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.455620] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.456549] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.457064] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.457592] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.458109] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.458576] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.458688] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.459334] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.459737] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.459848] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.460243] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.460356] [pid=1][INIT][ERROR] [init_service_manager.c:448)] Failed to gete
[  120.460735] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.460859] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.462387] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.462932] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.463408] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.464101] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.464186] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.464583] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.464693] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.465042] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.465574] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.465975] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.466432] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.466551] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.466893] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.467331] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.467950] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.468357] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.468836] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.468860] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.469263] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.469972] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.470360] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.471806] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.471919] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472067] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472172] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472280] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472362] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472469] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472594] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472673] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472790] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.472898] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473007] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473117] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473252] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473363] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473475] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473589] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473705] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473820] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.473946] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.474147] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.474263] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.474381] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.474499] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.475302] [pid=1][INIT][ERROR] [init_config.c:51)] Failed to parse json fig
[  120.475726] [pid=1][INIT][ERROR] [init_service_manager.c:800)] GetServiceSecp
[  120.475861] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:301)] Trigger itey
[  120.476266] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  120.476367] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  120.476453] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  120.476484] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  120.476505] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBd
[  120.477084] [pid=224][INIT][ERROR] [init_common_service.c:290)] set access td
[  120.500239] avc:  denied  { set } for parameter=startup.service.ctl.ueventd 1
[  120.500324] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  120.501023] [pid=226][INIT][ERROR] [init_common_service.c:290)] set access te
[  120.519306] [pid=224][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  120.519306]
[  120.519309] [pid=226][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  120.519309]
[  120.527829] [pid=224][INIT][ERROR] [ueventd.c:297)] Failed get default_boot_e
[  121.003230] kauditd_printk_skb: 333 callbacks suppressed
[  121.003234] audit: type=1400 audit(1501925412.573:345): avc:  denied  { read1
[  121.003275] audit: type=1400 audit(1501925412.573:346): avc:  denied  { geta1
[  121.003906] audit: type=1400 audit(1501925412.573:347): avc:  denied  { exec1
[  121.003921] audit: type=1400 audit(1501925412.573:348): avc:  denied  { read1
[  121.003974] audit: type=1400 audit(1501925412.573:349): avc:  denied  { exec1
[  121.008853] audit: type=1400 audit(1501925412.580:350): avc:  denied  { map 1
[  121.016298] audit: type=1400 audit(1501925412.586:351): avc:  denied  { writ1
[  121.016337] audit: type=1400 audit(1501925412.586:352): avc:  denied  { read1
[  121.016390] audit: type=1400 audit(1501925412.586:353): avc:  denied  { open1
[  121.016484] audit: type=1400 audit(1501925412.586:354): avc:  denied  { writ1
[  121.213666] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. c
[  121.224114] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reat
[  121.224348] [pid=1][INIT][ERROR] [init_cmds.c:223)] DoSymlink: link /sys/ker0
[  121.224383] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.224412] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.224439] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.224473] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.224579] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.224662] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.224742] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.224824] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.224907] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.224987] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225067] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225150] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225233] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225316] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225350] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.225380] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.225411] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.225441] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.225470] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.225501] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.225583] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225668] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225750] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225833] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.225866] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.225896] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.226252] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.226345] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.226382] [pid=1][INIT][ERROR] [init_cmds.c:223)] DoSymlink: link /storage0
[  121.229101] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.229192] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.229225] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.229312] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.229346] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229380] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229409] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.229444] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229475] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229505] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.229537] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229571] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229599] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.229633] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229667] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229695] [pid=1][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed f.
[  121.229728] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229761] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reas
[  121.229845] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.229931] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230016] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230097] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230180] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230263] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230346] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230427] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230509] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230591] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230674] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230800] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.230882] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.230913] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.230982] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.231016] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.231046] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.231307] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.231408] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.231441] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.231523] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.231555] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.231602] [pid=1][INIT][ERROR] [init_common_cmds.c:450)] Failed to mount f.
[  121.232324] Registered swp emulation handler
[  121.233319] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[  121.233578] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[  121.234493] hungtask_base set hungtask_enable to enable
[  121.234602] hungtask_base whitelist is init,appspawn
[  121.240203] [pid=1][INIT][ERROR] [init_common_cmds.c:330)] DoMkDir, Restorec.
[  121.243348] [pid=1][INIT][ERROR] [init_common_cmds.c:330)] DoMkDir, Restorec.
[  121.245936] [pid=1][INIT][ERROR] [init_common_cmds.c:330)] DoMkDir, Restorec.
[  121.247649] [pid=1][INIT][ERROR] [init_common_cmds.c:330)] DoMkDir, Restorec.
[  121.254772] [pid=233][INIT][ERROR] [init_service_file.c:67)] Set file env pu.
[  121.257348] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:380)] Can not fins
[  121.257425] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:380)] Can not fine
[  121.257442] PARAM[pid=1][INIT][ERROR] [trigger_processor.c:380)] Can not fint
[  121.261264] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.263636] [pid=232][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.263636]
[  121.265434] avc:  denied  { set } for parameter=debug.bytrace.tags.enablefla1
[  121.265616] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBd
[  121.265645] [pid=1][INIT][ERROR] [init_service_manager.c:935)] Cannot find s.
[  121.266441] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.267680] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.268357] [pid=234][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.268357]
[  121.269691] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  121.271046] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBn
[  121.272683] [pid=1][INIT][ERROR] [init_common_cmds.c:450)] Failed to mount f.
[  121.278123] [pid=235][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.278123]
[  121.282018] [pid=233][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.282018]
[  121.285413] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.286845] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.291307] [pid=236][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.291307]
[  121.295436] [pid=239][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.295436]
[  121.304819] [pid=238][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.304819]
[  121.314902] [pid=237][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.314902]
[  121.323563] [pid=246][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.323563]
[  121.327630] [pid=245][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.327630]
[  121.335080] [pid=243][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.335080]
[  121.337335] [pid=240][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.337335]
[  121.341479] [pid=242][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.341479]
[  121.343714] [pid=241][INIT][ERROR] [init_cmds.c:204)] init parameters failed.
[  121.343714]
[  121.378430] binder: 232:232 transaction failed 29189/-22, size 0-0 line 2984
[  121.400224] binder: 232:232 transaction failed 29189/-22, size 0-0 line 2984
[  121.421049] binder: 232:232 transaction failed 29189/-22, size 0-0 line 2984
[  121.425688] binder: 237:237 transaction failed 29189/-22, size 0-0 line 2984
[  121.442228] binder: 232:232 transaction failed 29189/-22, size 0-0 line 2984
[  121.444712] binder: 246:246 transaction failed 29189/-22, size 0-0 line 2984
[  121.462672] binder: 232:232 transaction failed 29189/-22, size 0-0 line 2984
[  121.483200] binder: 232:232 transaction failed 29189/-22, size 0-0 line 2984
[  121.504357] binder: 232:232 transaction failed 29189/-22, size 0-0 line 2984
[  121.510169] [pid=1][INIT][ERROR] [init_common_cmds.c:244)] Failed to get reat
[  121.527158] [E/devmgr_service] device hdf_kevent not in configed device list
[  121.528443] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.711717] [pid=1][INIT][ERROR] [init_common_cmds.c:293)] SetOwner invalid .
[  121.711772] [pid=1][INIT][ERROR] [init_common_cmds.c:346)] Failed to change .
[  121.810612] avc:  denied  { set } for parameter=sys.use_memfd pid=1 uid=0 gi1
[  121.810899] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.810937] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.811010] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.812092] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.819937] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.828976] [pid=286][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.828976]
[  121.837206] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBy
[  121.838379] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBb
[  121.840128] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBk
[  121.841027] [pid=287][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.841027]
[  121.843531] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBs
[  121.873119] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBo
[  121.874701] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.876275] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  121.877833] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  121.877954] [pid=1][INIT][ERROR] [init_service_manager.c:935)] Cannot find s.
[  121.878341] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.878859] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.878955] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.879102] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.879188] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.891860] udevd[239]: starting eudev-3.2.10
[  121.899511] [pid=295][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.899511]
[  121.900078] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.901885] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.902014] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.902381] [pid=1][INIT][ERROR] [init_cmds.c:81)] Failed to get param dev.ma
[  121.902400] [pid=1][INIT][ERROR] [init_common_cmds.c:59)] Failed to get valu0
[  121.902590] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.902692] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.913414] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.913574] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.913617] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  121.914349] [pid=293][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.914349]
[  121.917829] [pid=288][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.917829]
[  121.934709] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.934864] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.934958] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.935047] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.935133] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.935220] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.935410] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.935795] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.935889] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.935977] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936068] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936155] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936242] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936331] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936420] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936505] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936591] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936683] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936768] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.936851] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  121.938481] [pid=294][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.938481]
[  121.939230] avc:  denied  { set } for parameter=net.tcp.default_init_rwnd pi1
[  121.953477] [pid=296][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  121.953477]
[  121.966953] [pid=1][INIT][ERROR] [init_common_cmds.c:450)] Failed to mount f.
[  121.992991] file system registered
[  122.027033] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  122.027222] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  122.027542] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  122.027608] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  122.027649] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  122.027864] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  122.027898] [pid=1][INIT][ERROR] [init_common_cmds.c:361)] Failed to change 2
[  122.027985] [pid=1][INIT][ERROR] [init_common_cmds.c:305)] Failed to change .
[  122.028106] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBr
[  122.079103] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBa
[  122.080429] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  122.104395] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  122.107726] [pid=309][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.107726]
[  122.109908] [pid=310][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.109908]
[  122.114439] hungtask_base whitelist[0]-init-1
[  122.114573] hungtask_base whitelist[1]-appspawn-234
[  122.131644] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBa
[  122.132963] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBr
[  122.134335] [pid=308][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.134335]
[  122.156455] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  122.185311] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBr
[  122.186999] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  122.214091] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBe
[  122.216006] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBy
[  122.244387] [pid=330][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.244387]
[  122.276490] [pid=335][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.276490]
[  122.282817] [pid=333][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.282817]
[  122.282883] [pid=332][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.282883]
[  122.319512] [pid=334][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.319512]
[  122.358284] [pid=329][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.358284]
[  122.378636] [I/HDF_LOG_TAG] HdfTouchDispatch: cmd = 0
[  122.378673] [I/HDF_LOG_TAG] TouchGetDevType: enter, devType is 0
[  122.378706] [I/HDF_LOG_TAG] HdfTouchDispatch: cmd = 5
[  122.378715] [E/HDF_LOG_TAG] TouchGetDeviceStrInfo: parameter invalid
[  122.413393] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : socp.
[  122.430646] [pid=341][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.430646]
[  122.458663] [pid=340][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.458663]
[  122.475541] [pid=365][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.475541]
[  122.510488] [pid=363][INIT][ERROR] [init_common_service.c:164)] Failed to op.
[  122.510658] [pid=363][INIT][ERROR] [init_common_service.c:164)] Failed to op.
[  122.511068] [pid=363][INIT][ERROR] [init_common_service.c:164)] Failed to op.
[  122.518735] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : past.
[  122.520320] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : scre.
[  122.542259] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : devi.
[  122.558646] [pid=349][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.558646]
[  122.609063] [pid=356][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.609063]
[  122.662032] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : upms.
[  122.662102] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : bgta.
[  122.663372] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : toke.
[  122.664480] [pid=342][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.664480]
[  122.681571] [pid=376][INIT][ERROR] [init_common_service.c:164)] Failed to op.
[  122.732636] [pid=369][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.732636]
[  122.747888] [pid=364][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.747888]
[  122.794526] [pid=400][INIT][ERROR] [init_common_service.c:164)] Failed to op.
[  122.794629] [pid=400][INIT][ERROR] [init_common_service.c:164)] Failed to op.
[  122.794672] [pid=400][INIT][ERROR] [init_common_service.c:164)] Failed to op.
[  122.805103] [pid=366][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.805103]
[  122.813475] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : down.
[  122.870017] [pid=363][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.870017]
[  122.896543] [pid=370][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.896543]
[  122.901386] [pid=368][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.901386]
[  122.932009] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : dist.
[  122.932070] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : loca.
[  122.934809] [pid=399][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.934809]
[  122.958302] [pid=343][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.958302]
[  122.985898] [pid=375][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  122.985898]
[  122.991973] [pid=438][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed.
[  122.992128] [pid=438][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed.
[  122.992158] [pid=438][INIT][ERROR] [init_common_cmds.c:324)] DoMkDir, failed.
[  122.992280] [pid=438][INIT][ERROR] [init_common_cmds.c:305)] Failed to chang.
[  122.992456] [pid=438][INIT][ERROR] [init_common_cmds.c:305)] Failed to chang.
[  123.009232] [pid=438][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.009232]
[  123.115678] [pid=376][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.115678]
[  123.128066] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : acce.
[  123.129820] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : msdp.
[  123.136512] [pid=460][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.136512]
[  123.172363] [SCHED_RTG] config[0] = 1
[  123.172397] [SCHED_RTG] config[1] = 65535
[  123.172404] [SCHED_RTG] config[2] = 65535
[  123.172507] [SCHED_RTG] enabled!
[  123.185584] [pid=400][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.185584]
[  123.194017] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : blue.
[  123.206399] [pid=397][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.206399]
[  123.257842] [pid=487][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.257842]
[  123.284406] [pid=396][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.284406]
[  123.308537] [pid=398][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.308537]
[  123.329096] [pid=417][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.329096]
[  123.338912] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : memm.
[  123.339021] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : reso.
[  123.356548] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : work.
[  123.408357] [pid=461][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.408357]
[  123.415353] [pid=437][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.415353]
[  123.443703] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : wall.
[  123.465933] [pid=504][INIT][ERROR] [init_common_cmds.c:305)] Failed to chang.
# [  123.511499] [pid=468][INIT][ERROR] [init_service.c:110)] init parameters f.
[  123.511499]
[  123.544214] [pid=467][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.544214]
[  123.564907] [pid=505][INIT][ERROR] [init_common_service.c:164)] Failed to op.
[  123.574128] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : edm_.
[  123.576037] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : isps.
[  123.581372] [pid=474][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.581372]
[  123.627282] [pid=486][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.627282]
[  123.645614] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBd
[  123.677658] [pid=481][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.677658]
[  123.681064] [pid=480][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.681064]
[  123.716218] [pid=488][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.716218]
[  123.735279] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBd
[  123.735431] [pid=1][INIT][ERROR] [init_common_service.c:272)] service : hdcd.
[  123.735606] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 20
[  123.794851] avc:  denied  { set } for parameter=ohos.servicectrl.disp_grallo1
[  123.794975] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  123.818903] [pid=499][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.818903]
[  123.825310] [pid=498][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.825310]
[  123.837348] [pid=505][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.837348]
[  123.858421] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  123.956443] [pid=514][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.956443]
[  123.968091] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  123.970336] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  123.996070] [pid=515][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  123.996070]
[  124.011295] [pid=516][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.011295]
[  124.046345] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.083874] [pid=525][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.083874]
[  124.101488] [pid=559][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.101488]
[  124.160679] [pid=526][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.160679]
[  124.218788] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.262024] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.266430] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.318847] [pid=531][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.318847]
[  124.373400] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.394607] [pid=530][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.394607]
[  124.419269] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.423658] [pid=553][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.423658]
[  124.468869] [pid=579][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.468869]
[  124.489424] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.529272] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.575321] [pid=607][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.575321]
[  124.587489] [pid=560][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.587489]
[  124.596022] read descriptors
[  124.617462] read strings
[  124.641619] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBt
[  124.644286] avc:  denied  { set } for parameter=sys.usb.ffs.ready pid=526 ui1
[  124.696455] [pid=646][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.696455]
[  124.698175] [pid=580][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.698175]
[  124.746388] [pid=601][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.746388]
[  124.764376] [pid=630][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.764376]
[  124.785899] [pid=590][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.785899]
[  124.806414] [pid=625][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.806414]
[  124.821842] [E/devmgr_service] device hdf_kevent not in configed device list
[  124.825605] avc:  denied  { set } for parameter=bootevent.useriam.fwkready p1
[  124.825822] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBh
[  124.826981] [pid=1][INIT][ERROR] [init_service_manager.c:930)] StartServiceBh
[  124.873299] [pid=631][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  124.873299]
[  124.903375] [pid=688][INIT][ERROR] [init_common_service.c:179)] failed to se.
[  124.906291] [pid=689][INIT][ERROR] [init_common_service.c:179)] failed to se.
[  124.926374] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 50
[  124.978704] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.001520] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.097224] [pid=689][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  125.097224]
[  125.131486] [I/USB_PNP_NOTIFY] UsbPnpNotifyDispatch: received cmd = 2
[  125.131624] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:216 i=0, interfaceInf0
[  125.131640] [I/USB_PNP_NOTIFY] UsbPnpNotifyHdfSendEvent:387 report one devic!
[  125.131663] [I/USB_PNP_NOTIFY] UsbPnpNotifyFirstReport: report all device in!
[  125.131680] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:216 i=0, interfaceInf0
[  125.131691] [I/USB_PNP_NOTIFY] UsbPnpNotifyHdfSendEvent:387 report one devic!
[  125.131703] [I/USB_PNP_NOTIFY] UsbPnpNotifyFirstReport: report all device in!
[  125.131718] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:216 i=0, interfaceInf0
[  125.131729] [I/USB_PNP_NOTIFY] UsbPnpNotifyHdfSendEvent:387 report one devic!
[  125.131741] [I/USB_PNP_NOTIFY] UsbPnpNotifyFirstReport: report all device in!
[  125.131755] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:216 i=0, interfaceInf0
[  125.131767] [I/USB_PNP_NOTIFY] UsbPnpNotifyHdfSendEvent:387 report one devic!
[  125.131778] [I/USB_PNP_NOTIFY] UsbPnpNotifyFirstReport: report all device in!
[  125.131794] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:216 i=0, interfaceInf0
[  125.131829] [I/USB_PNP_NOTIFY] UsbPnpNotifyHdfSendEvent:387 report one devic!
[  125.131894] [I/USB_PNP_NOTIFY] UsbPnpNotifyFirstReport: report all device in!
[  125.131910] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:216 i=0, interfaceInf0
[  125.131921] [I/USB_PNP_NOTIFY] UsbPnpNotifyHdfSendEvent:387 report one devic!
[  125.131932] [I/USB_PNP_NOTIFY] UsbPnpNotifyFirstReport: report all device in!
[  125.131949] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:216 i=0, interfaceInf0
[  125.131959] [I/USB_PNP_NOTIFY] UsbPnpNotifyHdfSendEvent:387 report one devic!
[  125.131970] [I/USB_PNP_NOTIFY] UsbPnpNotifyFirstReport: report all device in!
[  125.133206] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.195128] [pid=688][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  125.195128]
[  125.199796] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.207650] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.255429] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.258915] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.281249] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.287484] hungtask_base whitelist[0]-init-1
[  125.287598] hungtask_base whitelist[1]-appspawn-234
[  125.305223] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.351289] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 20
[  125.394578] [pid=809][INIT][ERROR] [init_service.c:110)] init parameters fai.
[  125.394578]
[  125.424735] [pid=1][INIT][ERROR] [init_signal_handler.c:39)] Child process 39
[  125.434332] [pid=1][INIT][ERROR] [init_signal_handler.c:39)] Child process 41
[  125.812798] [E/devmgr_service] device hdf_kevent not in configed device list
[  125.827638] [E/devmgr_service] device hdf_kevent not in configed device list
[  126.024456] kauditd_printk_skb: 1829 callbacks suppressed
[  126.024461] audit: type=1400 audit(1501925417.596:2184): avc:  denied  { sea1
[  126.025125] audit: type=1400 audit(1501925417.596:2185): avc:  denied  { wri1
[  126.025183] audit: type=1400 audit(1501925417.596:2186): avc:  denied  { add1
[  126.025270] audit: type=1400 audit(1501925417.596:2187): avc:  denied  { cre1
[  126.025283] audit: type=1400 audit(1501925417.596:2188): avc:  denied  { ass1
[  126.029030] audit: type=1400 audit(1501925417.600:2189): avc:  denied  { cre1
[  126.031302] audit: type=1400 audit(1501925417.603:2190): avc:  denied  { wri1
[  126.031412] audit: type=1400 audit(1501925417.603:2191): avc:  denied  { ope1
[  126.033468] audit: type=1400 audit(1501925417.603:2192): avc:  denied  { ioc1
[  126.034189] audit: type=1400 audit(1501925417.606:2193): avc:  denied  { con1
[  126.231576] [E/devmgr_service] device hdf_kevent not in configed device list
[  126.241579] [E/devmgr_service] device hdfwifi not in configed device list
[  126.244412] [E/osal_mutex] OsalMutexLock invalid param
[  126.244638] [E/osal_mutex] OsalMutexUnlock invalid param
[  126.247487] [E/rk3568_platform_ops] [Rk3568DmaSubmit][line:311]: success
[  126.247544] [I/rk3568_platform_ops] [Rk3568DmaPending][line:325]: dmaChan ch.
[  126.254959] [E/devmgr_service] device hdfwifi not in configed device list
[  126.304131] [E/rk3568_platform_ops] [Rk3568DmaSubmit][line:311]: success
[  126.304199] [I/rk3568_platform_ops] [Rk3568DmaPending][line:325]: dmaChan ch.
[  126.338987] [E/devmgr_service] device hdf_kevent not in configed device list
[  126.862839] [I/USB_PNP_NOTIFY] UsbPnpNotifyDispatch: received cmd = 20
[  128.487496] hungtask_base whitelist[0]-init-1
[  128.487611] hungtask_base whitelist[1]-appspawn-234
[  129.425236] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 80
[  129.441936] [pid=1247][INIT][ERROR] [init_service.c:110)] init parameters fa.
[  129.441936]
[  129.646875]  hmdfs: hmdfs_make_bitem() make bundle item = com.example.distric
[  129.647168]  hmdfs: hmdfs_bid_store() store bundle id
[  129.647182]  hmdfs: insert_bid_hash_entry() insert name = com.example.distric
[  129.647267]  hmdfs: hmdfs_make_bitem() make bundle item = com.example.kikaked
[  129.647434]  hmdfs: hmdfs_bid_store() store bundle id
[  129.647447]  hmdfs: insert_bid_hash_entry() insert name = com.example.kikaked
[  129.647535]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.adminprovg
[  129.647670]  hmdfs: hmdfs_bid_store() store bundle id
[  129.647680]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.adminprovg
[  129.647754]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.callui
[  129.647870]  hmdfs: hmdfs_bid_store() store bundle id
[  129.647880]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.callui
[  129.647953]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.camera
[  129.648065]  hmdfs: hmdfs_bid_store() store bundle id
[  129.648078]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.camera
[  129.648140]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.contacts
[  129.648243]  hmdfs: hmdfs_bid_store() store bundle id
[  129.648252]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.contacts
[  129.648312]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.contactsdy
[  129.648415]  hmdfs: hmdfs_bid_store() store bundle id
[  129.648424]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.contactsdy
[  129.648483]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.devicemani
[  129.648589]  hmdfs: hmdfs_bid_store() store bundle id
[  129.648598]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.devicemani
[  129.648654]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.distributr
[  129.648762]  hmdfs: hmdfs_bid_store() store bundle id
[  129.648771]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.distributr
[  129.648827]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.download
[  129.648927]  hmdfs: hmdfs_bid_store() store bundle id
[  129.648935]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.download
[  129.648993]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.filepicker
[  129.649107]  hmdfs: hmdfs_bid_store() store bundle id
[  129.649116]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.filepicker
[  129.649174]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.launcher
[  129.649276]  hmdfs: hmdfs_bid_store() store bundle id
[  129.649285]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.launcher
[  129.649346]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.medialibrA
[  129.649448]  hmdfs: hmdfs_bid_store() store bundle id
[  129.649458]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.medialibrA
[  129.649517]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.medialibrA
[  129.649620]  hmdfs: hmdfs_bid_store() store bundle id
[  129.649629]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.medialibrA
[  129.649687]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.mms
[  129.649785]  hmdfs: hmdfs_bid_store() store bundle id
[  129.649794]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.mms
[  129.649855]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.note
[  129.649952]  hmdfs: hmdfs_bid_store() store bundle id
[  129.649960]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.note
[  129.650017]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.nweb
[  129.650120]  hmdfs: hmdfs_bid_store() store bundle id
[  129.650130]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.nweb
[  129.650193]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.permissior
[  129.650299]  hmdfs: hmdfs_bid_store() store bundle id
[  129.650309]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.permissior
[  129.650372]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.photos
[  129.650484]  hmdfs: hmdfs_bid_store() store bundle id
[  129.650495]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.photos
[  129.650567]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.screenshot
[  129.650675]  hmdfs: hmdfs_bid_store() store bundle id
[  129.650714]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.screenshot
[  129.650787]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.settings
[  129.650894]  hmdfs: hmdfs_bid_store() store bundle id
[  129.650903]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.settings
[  129.650960]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.settings.h
[  129.651076]  hmdfs: hmdfs_bid_store() store bundle id
[  129.651088]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.settings.h
[  129.651146]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.settingsda
[  129.651246]  hmdfs: hmdfs_bid_store() store bundle id
[  129.651255]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.settingsda
[  129.651312]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.systemui
[  129.651414]  hmdfs: hmdfs_bid_store() store bundle id
[  129.651423]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.systemui
[  129.651486]  hmdfs: hmdfs_make_bitem() make bundle item = com.ohos.telephonyy
[  129.651596]  hmdfs: hmdfs_bid_store() store bundle id
[  129.651606]  hmdfs: insert_bid_hash_entry() insert name = com.ohos.telephonyy
[  129.651683]  hmdfs: hmdfs_make_bitem() make bundle item = ohos.example.shoppg
[  129.651804]  hmdfs: hmdfs_bid_store() store bundle id
[  129.651814]  hmdfs: insert_bid_hash_entry() insert name = ohos.example.shoppg
[  129.651887]  hmdfs: hmdfs_make_bitem() make bundle item = ohos.global.backgrs
[  129.651991]  hmdfs: hmdfs_bid_store() store bundle id
[  129.652000]  hmdfs: insert_bid_hash_entry() insert name = ohos.global.backgrs
[  129.652058]  hmdfs: hmdfs_make_bitem() make bundle item = ohos.global.systems
[  129.652157]  hmdfs: hmdfs_bid_store() store bundle id
[  129.652166]  hmdfs: insert_bid_hash_entry() insert name = ohos.global.systems
[  129.652228]  hmdfs: hmdfs_make_bitem() make bundle item = ohos.samples.airquy
[  129.652342]  hmdfs: hmdfs_bid_store() store bundle id
[  129.652353]  hmdfs: insert_bid_hash_entry() insert name = ohos.samples.airquy
[  129.652421]  hmdfs: hmdfs_make_bitem() make bundle item = ohos.samples.clock
[  129.652530]  hmdfs: hmdfs_bid_store() store bundle id
[  129.652539]  hmdfs: insert_bid_hash_entry() insert name = ohos.samples.clock
[  129.652602]  hmdfs: hmdfs_make_bitem() make bundle item = ohos.samples.ecg
[  129.652704]  hmdfs: hmdfs_bid_store() store bundle id
[  129.652713]  hmdfs: insert_bid_hash_entry() insert name = ohos.samples.ecg
[  129.652778]  hmdfs: hmdfs_make_bitem() make bundle item = ohos.samples.flasht
[  129.652882]  hmdfs: hmdfs_bid_store() store bundle id
[  129.652892]  hmdfs: insert_bid_hash_entry() insert name = ohos.samples.flasht
[  129.652952]  hmdfs: hmdfs_make_bitem() make bundle item = ohos.telephony.ress
[  129.653062]  hmdfs: hmdfs_bid_store() store bundle id
[  129.653071]  hmdfs: insert_bid_hash_entry() insert name = ohos.telephony.ress
[  129.670887] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[  129.671998] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[  129.675675] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-1:00] driver [)
[  129.690837] dwmac4: Master AXI performs any burst length
[  129.690877] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features supportd
[  129.690901] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Tid
[  129.691490] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
[  129.695274] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii e
[  129.695949] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[  129.696458] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[  129.698600] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[  129.699370] rockchip-cpuinfo cpuinfo: failed to get id cell: -517
[  129.700098] rk_gmac-dwmac fe2a0000.ethernet eth1: PHY [stmmac-0:00] driver [)
[  129.710762] dwmac4: Master AXI performs any burst length
[  129.710802] rk_gmac-dwmac fe2a0000.ethernet eth1: No Safety Features supportd
[  129.710827] rk_gmac-dwmac fe2a0000.ethernet eth1: IEEE 1588-2008 Advanced Tid
[  129.711299] rk_gmac-dwmac fe2a0000.ethernet eth1: registered PTP clock
[  129.713411] rk_gmac-dwmac fe2a0000.ethernet eth1: configuring for phy/rgmii e
[  129.714174] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[  130.700933] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev nug
[  131.111454] [dm=0D002800][pid=242][mmi_service.cpp:57][klog][info] ChkDefs:
[  131.111552] [dm=0D002800][pid=242][mmi_service.cpp:57][klog][info] OHOS_BUIL
[  131.111592] [dm=0D002800][pid=242][mmi_service.cpp:57][klog][info] OHOS_BUIL
[  131.113296] kauditd_printk_skb: 513 callbacks suppressed
[  131.113301] audit: type=1400 audit(1501925422.683:2707): avc:  denied  { rea1
[  131.118195] audit: type=1400 audit(1501925422.690:2708): avc:  denied  { rea1
[  131.118239] audit: type=1400 audit(1501925422.690:2709): avc:  denied  { ope1
[  131.129584] audit: type=1400 audit(1501925422.700:2710): avc:  denied  { get1
[  131.129665] audit: type=1400 audit(1501925422.700:2711): avc:  denied  { rea1
[  131.129697] audit: type=1400 audit(1501925422.700:2712): avc:  denied  { ope1
[  131.129971] audit: type=1400 audit(1501925422.700:2713): avc:  denied  { rea1
[  131.130852] audit: type=1400 audit(1501925422.703:2714): avc:  denied  { sea1
[  131.130951] audit: type=1400 audit(1501925422.703:2715): avc:  denied  { get1
[  131.131002] audit: type=1400 audit(1501925422.703:2716): avc:  denied  { rea1
[  131.292518] [E/rk3568_platform_ops] [Rk3568DmaPause][line:343]: success
[  131.356522] [E/rk3568_platform_ops] [Rk3568DmaPause][line:343]: success
[  131.687428] hungtask_base whitelist[0]-init-1
[  131.687528] hungtask_base whitelist[1]-appspawn-234
[  132.160356]  hmdfs: hmdfs_do_load() No file path
[  132.160406]  hmdfs: hmdfs_do_load() No file path
[  132.163365]  hmdfs: hmdfs_do_load() No file path
[  132.163417]  hmdfs: hmdfs_do_load() No file path
[  133.469555] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 10
[  133.483848] [pid=1498][INIT][ERROR] [init_service.c:110)] init parameters fa.
[  133.483848]
[  134.887453] hungtask_base whitelist[0]-init-1
[  134.887562] hungtask_base whitelist[1]-appspawn-234
[  136.182289] kauditd_printk_skb: 261 callbacks suppressed
[  136.182294] audit: type=1400 audit(1501925427.753:2978): avc:  denied  { sea1
[  136.182335] audit: type=1400 audit(1501925427.753:2979): avc:  denied  { rea1
[  136.188518] audit: type=1400 audit(1501925427.760:2980): avc:  denied  { get1
[  136.192761] audit: type=1400 audit(1501925427.763:2981): avc:  denied  { sea1
[  137.509327] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 10
[  137.509775] audit: type=1400 audit(1501925429.080:2983): avc:  denied  { sea1
[  137.509804] audit: type=1400 audit(1501925429.080:2982): avc:  denied  { rea1
[  137.509815] audit: type=1400 audit(1501925429.080:2984): avc:  denied  { ope1
[  137.509823] audit: type=1400 audit(1501925429.080:2985): avc:  denied  { rea1
[  137.510035] [pid=1][INIT][ERROR] [init_common_service.c:462)] Service name=t.
[  138.087439] hungtask_base whitelist[0]-init-1
[  138.087539] hungtask_base whitelist[1]-appspawn-234
[  139.766350] audit: type=1400 audit(1501925431.336:2986): avc:  denied  { sea1
[  140.064471] audit: type=1400 audit(1501925431.636:2987): avc:  denied  { rea1
[  141.287430] hungtask_base whitelist[0]-init-1
[  141.287531] hungtask_base whitelist[1]-appspawn-234
[  144.487403] hungtask_base whitelist[0]-init-1
[  144.487519] hungtask_base whitelist[1]-appspawn-234
[  147.687422] hungtask_base whitelist[0]-init-1
[  147.687522] hungtask_base whitelist[1]-appspawn-234
[  150.887409] hungtask_base whitelist[0]-init-1
[  150.887512] hungtask_base whitelist[1]-appspawn-234
[  154.087401] hungtask_base whitelist[0]-init-1
[  154.087503] hungtask_base whitelist[1]-appspawn-234
[  157.287405] hungtask_base whitelist[0]-init-1
[  157.287523] hungtask_base whitelist[1]-appspawn-234
[  160.487445] hungtask_base whitelist[0]-init-1
[  160.487564] hungtask_base whitelist[1]-appspawn-234
[  163.687399] hungtask_base whitelist[0]-init-1
[  163.687500] hungtask_base whitelist[1]-appspawn-234
[  165.799971] kauditd_printk_skb: 11 callbacks suppressed
[  165.799976] audit: type=1400 audit(1501925457.370:2999): avc:  denied  { rea1
[  165.800034] audit: type=1400 audit(1501925457.370:3000): avc:  denied  { sea1
[  165.800069] audit: type=1400 audit(1501925457.370:3001): avc:  denied  { dac1
[  165.800101] audit: type=1400 audit(1501925457.370:3002): avc:  denied  { sea1
[  165.800135] audit: type=1400 audit(1501925457.370:3003): avc:  denied  { rea1
[  165.800166] audit: type=1400 audit(1501925457.370:3004): avc:  denied  { ope1
[  165.800208] audit: type=1400 audit(1501925457.370:3005): avc:  denied  { ioc1
[  166.191377] audit: type=1400 audit(1501925457.763:3006): avc:  denied  { sen1
[  166.213442] audit: type=1400 audit(1501925457.783:3007): avc:  denied  { rea1
[  166.213487] audit: type=1400 audit(1501925457.783:3008): avc:  denied  { ope1
[  166.296259] PM: suspend entry (deep)
[  166.304631] Filesystems sync: 0.008 seconds
[  166.305688] [dhd] dhd_pm_callback: action=3, suspend=1, suspend_mode=0
[  166.306302] [I/devmgr_service] DevmgrServicePowerStateChange:suspend state 3
[  166.306331] [I/sample_driver_test] HdfSampleSuspend:called
[  166.306340] [I/pm_driver_test] HdfPmTestSuspend called
[  166.306400] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  166.309249] OOM killer disabled.
[  166.309256] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) d.
[  166.311186] printk: Suspending console(s) (use no_console_suspend to debug)
DDR Version V1.10 20210810

作者: 小山～only 时间: 2022-7-6 23:12

15882469674 发表于 2022-6-17 17:18
3.1-release和最新的3.2-beta我都适配好了，完全没问题，但需要自己改动内核和openharmony的部分启动参数

需要改动哪些启动参数，可以分享一下吗

作者: Firefly_Javier 时间: 2022-7-7 08:58

小山～only 发表于 2022-7-6 22:42

按照新流程不会不断重启的，除非没有改动power_mode_config.xml，你挂载下system.img，看下system/etc/power_config/power_mode_config.xml的内容是不是这样子的：

<?xml version="1.0" encoding="utf-8" ?>
<!--
Power Mode Definitions:
NORMAL_MODE = 600,
POWER_SAVE_MODE = 601,
EXTREME_MODE = 602,
-->
<!--
Action Definitions:
DisplayOffTime = 101,
SystemAutoSleepTime = 102,
AutoAdjustBrightness = 103,
AutoWindownRoration = 107,
SetBrightness = 115,
VibratorsState = 120,
-->
<switch_proxy version="1">
<proxy id="600">
<switch id="101" value="-1" recover_flag="0"/>
<switch id="102" value="0" recover_flag="0"/>
<switch id="103" value="-1" recover_flag="0"/>
<switch id="107" value="1" recover_flag="0"/>
<switch id="120" value="1" recover_flag="0"/>
</proxy>
<proxy id="601">
<switch id="101" value="-1" recover_flag="0"/>
<switch id="102" value="5000" recover_flag="0"/>
<switch id="103" value="-1" recover_flag="0"/>
<switch id="107" value="-1" recover_flag="0"/>
<switch id="115" value="50" recover_flag="0"/>
<switch id="120" value="-1" recover_flag="0"/>
</proxy>
<proxy id="602">
<switch id="101" value="-1" recover_flag="0"/>
<switch id="102" value="-1" recover_flag="0"/>
<switch id="103" value="-1" recover_flag="0"/>
<switch id="107" value="1" recover_flag="0"/>
<switch id="115" value="255" recover_flag="0"/>
<switch id="120" value="1" recover_flag="0"/>
</proxy>
<proxy id="603">
<switch id="101" value="-1" recover_flag="0"/>
<switch id="102" value="1000" recover_flag="0"/>
<switch id="103" value="-1" recover_flag="0"/>
<switch id="107" value="-1" recover_flag="0"/>
<switch id="115" value="25" recover_flag="0"/>
<switch id="120" value="-1" recover_flag="0"/>
</proxy>
</switch_proxy>

复制代码

作者: 小山～only 时间: 2022-7-7 09:42

Firefly_Javier 发表于 2022-7-7 08:58
按照新流程不会不断重启的，除非没有改动power_mode_config.xml，你挂载下system.img，看下system/etc/po ...

power_mode_config.xml 如下，是还需要打补丁吗，按旧流程那样打上power_manager.patch？新流程没提就没打，还有就是烧录楼主提供的固件，系统起得来，但是HDMI屏幕还是只亮了一下，显示了logo，然后就不亮了。
<?xml version="1.0" encoding="utf-8" ?>


<switch_proxy version="1">
<proxy id="600">
<switch id="101" value="30000" recover_flag="0"/>
<switch id="102" value="0" recover_flag="0"/>
<switch id="103" value="-1" recover_flag="0"/>
<switch id="107" value="1" recover_flag="0"/>
<switch id="120" value="1" recover_flag="0"/>
</proxy>
<proxy id="601">
<switch id="101" value="10000" recover_flag="0"/>
<switch id="102" value="5000" recover_flag="0"/>
<switch id="103" value="-1" recover_flag="0"/>
<switch id="107" value="-1" recover_flag="0"/>
<switch id="115" value="50" recover_flag="0"/>
<switch id="120" value="-1" recover_flag="0"/>
</proxy>
<proxy id="602">
<switch id="101" value="-1" recover_flag="0"/>
<switch id="102" value="-1" recover_flag="0"/>
<switch id="103" value="-1" recover_flag="0"/>
<switch id="107" value="1" recover_flag="0"/>
<switch id="115" value="255" recover_flag="0"/>
<switch id="120" value="1" recover_flag="0"/>
</proxy>
<proxy id="603">
<switch id="101" value="5000" recover_flag="0"/>
<switch id="102" value="1000" recover_flag="0"/>
<switch id="103" value="-1" recover_flag="0"/>
<switch id="107" value="-1" recover_flag="0"/>
<switch id="115" value="25" recover_flag="0"/>
<switch id="120" value="-1" recover_flag="0"/>
</proxy>
</switch_proxy>

作者: Firefly_Javier 时间: 2022-7-7 10:03

小山～only 发表于 2022-7-7 09:42
power_mode_config.xml 如下，是还需要打补丁吗，按旧流程那样打上power_manager.patch？新流程没提就没 ...

嗯，你手动改一下

作者: wx_閻濆倿娼檁1461 时间: 2022-7-8 11:01
下载下来看看

作者: wx_閻濆倿娼檁1461 时间: 2022-7-8 11:22
楼主的patch在那，我怎么没有发现呢？

作者: wx_閻濆倿娼檁1461 时间: 2022-7-8 18:02
楼主，使用你的这个地址：
repo init --repo-url=https://gitlab.com/firefly-linux/git-repo -u https://gitee.com/openharmony/manifest.git -b OpenHarmony-3.1-Release --no-clone-bundle
下载代码会出现失败，然后采用以下地址可以下载成功：
repo init -u https://gitee.com/openharmony/manifest.git -b OpenHarmony-3.1-Release --no-clone-bundle
$ .repo/repo/repo sync -c --no-tags
$ .repo/repo/repo forall -c 'git lfs pull'
但是编译的时候会出现CameraStandard没有定义，也就是说你的代码采用了比OpenHarmony-3.1-Release默认下载新的代码，
在3.2中这个CameraStandard已经改成Camera了，请问下是因为你指定了某个版本号吗？

作者: Firefly_Javier 时间: 2022-7-8 20:57

wx_閻濆倿娼檁1461 发表于 2022-7-8 18:02
楼主，使用你的这个地址：
repo init --repo-url=https://gitlab.com/firefly-linux/git-repo -u https:// ...

没有遇到过，如你说见，我提供的命令是直接指定OpenHarmny-3.1-Release版本的来编译的，包括我提供的补丁也是OpenHarmny-3.1-Release，你编译出错的仓库是哪个？

作者: wx_閻濆倿娼檁1461 时间: 2022-7-9 11:32
本帖最后由 wx_閻濆倿娼檁1461 于 2022-7-9 11:35 编辑

楼主，我下载openharmony3.1代码，打入楼主patch后，发现有好几个地方不一样的，
1、比如在\device\hihope\rk3568\camera\src\pipeline_core\BUILD.gn文件中包含了这个文件：
"//drivers/peripheral/camera/interfaces/metadata/include"，这个文件在3.1 release是没有这个文件的，3.1 release的原始代码引用的是：//foundation/multimedia/camera_standard/frameworks/native/metadata/include"，直到3.2代码才移动到driver下。
所以我这边编译不过，不清楚是不是版本问题；
2、我尝试将楼主的device/hihope代码merge到3.1 release中去，里面摄像头的东西没有merge，还有部分DISPLAY的log相关的没有merge，
其他统一读merge过去了；再将 base/powermgr/power_manager/services/native/profile/power_mode_config.xml也merge过去；
然后编译，系统起来图像显示到左上角去了，鼠标拖影，感觉哪点不对。

我现在问题就是HDMI不能显示，请楼主帮忙指点下，谢谢！

1657334658666.png (25.13 KB, 下载次数: 71)

97fca61717792b65392773fadee95ef.jpg (423.42 KB, 下载次数: 80)

作者: Firefly_Javier 时间: 2022-7-9 15:37

wx_閻濆倿娼檁1461 发表于 2022-7-9 11:32
楼主，我下载openharmony3.1代码，打入楼主patch后，发现有好几个地方不一样的，
1、比如在\device\hihope ...

第一个问题，我怀疑你下载错SDK，不是3.1-Release，你可以在device/hihope看下最新提交是否为3.1-Release的，验证方法可以去gitee找对应仓库

第二个问题是屏幕的最佳分辨率问题，也是在3.1-Release解决的，出问题还是可能下载错SDK了

作者: wx_閻濆倿娼檁1461 时间: 2022-7-9 21:31
楼主，非常感谢，经过你的提醒确实因为我下载了refs/tags/OpenHarmony-v3.1-Release,改为OpenHarmony-v3.1-Release就好了，系统也能够正常起来，但是发现：
1、编译的版本鼠标都是重影，而你给的镜像就没有这个问题；
2、HDMI拔掉后再插上就不会显示；
这个能给些建议吗？

7daef5500692f343cc6d746defcd476.jpg (155.95 KB, 下载次数: 81)

作者: 小山～only 时间: 2022-7-10 10:16

wx_閻濆倿娼檁1461 发表于 2022-7-9 21:31
楼主，非常感谢，经过你的提醒确实因为我下载了refs/tags/OpenHarmony-v3.1-Release,改为OpenHarmony-v3.1- ...

请问refs/tags/OpenHarmony-v3.1-Release改为OpenHarmony-v3.1-Release是什么意思？

作者: 小山～only 时间: 2022-7-10 10:21

Firefly_Javier 发表于 2022-7-7 10:03
嗯，你手动改一下

打了补丁后，系统跑起来了，但是屏幕一直没有显示，切换设备树固件，接上mipi屏也一样，HDMI和mipi都是有收到信号的，但是就是看不见画面，补丁打了两个 fix_screen.patch 和 power_manager.patch，是还需要其他设置吗

作者: Firefly_Javier 时间: 2022-7-10 10:22

小山～only 发表于 2022-7-10 10:16
请问refs/tags/OpenHarmony-v3.1-Release改为OpenHarmony-v3.1-Release是什么意思？

请注意：refs/tags是tag记录

refs/tags/OpenHarmony-v3.1-Release：是3.1-Release刚刚发布的时候打上去的标签tag，也就是说这是3.1-Release最开始的提交，提交记录非常旧
OpenHarmony-3.1-Release：是3.1-Release的分支，可以下载到3.1-Release的最新提交，包括bug修复

作者: 小山～only 时间: 2022-7-10 10:26

Firefly_Javier 发表于 2022-7-10 10:22
请注意：refs/tags是tag记录

refs/tags/OpenHarmony-v3.1-Release：是3.1-Release刚刚发布的时候打上 ...

懂了，也就是说仓库书初始化时，要用-b OpenHarmony-v3.1-Release，而不是 -b refs/tags/OpenHarmony-v3.1-Release

作者: Firefly_Javier 时间: 2022-7-10 10:29

小山～only 发表于 2022-7-10 10:26
懂了，也就是说仓库书初始化时，要用-b OpenHarmony-v3.1-Release，而不是 -b refs/tags/OpenHarmony-v3. ...

是的，我很早在最新流程更新了命令了，你可能没有留意到。
准确来说是：-b OpenHarmony-3.1-Release不是-b OpenHarmony-v3.1-Release

作者: 小山～only 时间: 2022-7-10 10:49

Firefly_Javier 发表于 2022-7-10 10:29
是的，我很早在最新流程更新了命令了，你可能没有留意到。
准确来说是：-b OpenHarmony-3.1-Release不是 ...

嗯嗯，之前下载的是官网代码，没注意到，然后执行楼主的修改补丁命令后编译出现了前面一位同学一样的问题就是缺少一些文件，后面改为楼主的新流程，从楼主的仓库下载了代码，执行修改补丁后，编译就没问题了，后面也听楼主的，打上之前提到的补丁 fix_screen.patch 和 power_manager.patch，而device_firefly.patch没，有打，因为发现执行完修改补丁命令后，0001-rockchip-arm64-add-firefly-rk3568-roc-pc.patch已经被包含了，编译烧录后，系统没再出现不断拿重启的现象，但是，屏幕只在uboot阶段正常显示了logo，后面虽然屏幕能收到信号但是却没有画面，HDMI和mipi都一样。

作者: leoleo 时间: 2022-7-10 15:06

Firefly_Javier 发表于 2022-4-20 11:26
只用于ROC-3568-PC，AIO 3568J要支持的话，需要添加内核补丁，这个后面再跟进

楼主请问AIO 3568J的测试固件有了吗

作者: wx_閻濆倿娼檁1461 时间: 2022-7-10 16:09
楼主，请问下编译的镜像与提供的镜像代码有没有什么差异的没有提交上去？我用提供的镜像效果就非常好，而我编译的镜像
稍微移动下屏幕上面都是鼠标。

作者: leoleo 时间: 2022-7-11 09:40

leoleo 发表于 2022-7-10 15:06
楼主请问AIO 3568J的测试固件有了吗

楼主，请问我在您上个帖子OpenHarmony 3.1Beta流程中的步骤二，编译修改内核，在kernel/arch/arm64/configs/firefly_linux_defconfig中增加
CONFIG_ANDROID_BINDER_IPC=y 后，编译出现了如下错误，是什么原因呢file:///C:/Users/56863/AppData/Local/Temp/WeChat%20Files/d4f9d073d4b304777d518fea6e98513.png

d4f9d073d4b304777d518fea6e98513.png (21.94 KB, 下载次数: 39)

作者: leoleo 时间: 2022-7-11 14:08
本帖最后由 leoleo 于 2022-7-11 14:43 编辑

楼主请问您有OpenHarmony 3.1 Beta版本 aio-3568J的固件吗，实在根据流程做不出来了想拿现成固件烧写一下可以吗

作者: Beau 时间: 2022-7-11 15:32

我执行这个的时候报了这样的错

，想问下怎么解决

作者: wb4916 时间: 2022-7-13 18:05

Firefly_Javier 发表于 2022-6-15 09:18
哪个板子？ROC-3568-PC目前是正常的，AIOJ-3568是有这个问题，还在研究

开发板使用用：AIO-3568J，使用第一帖提供的预编译固件：ROC-RK3568-PC-OpenHarmony-3.1-Release-GPT-20220620.7z
【附上测试固件ROC-RK3568-PC：https://pan.baidu.com/s/1_WQvAAvJSAPFtiiCmPbBpQ?pwd=1234】

可以进界面，进界面之后插鼠标正常。
【鼠标要插在蓝色的USB3.0接口，插在白色的USB2.0的接口鼠标的灯不亮！】
【如果开机之前鼠标就插在蓝色的USB3.0接口，鼠标的灯亮但是不会出现鼠标的箭头，OpenHarmony-3.1的USB接口的驱动程序可能还是没有做好。】

$ mkdir OpenHarmony-3.1
$ cd OpenHarmony-3.1

curl -s https://gitee.com/oschina/repo/raw/fork_flow/repo-py3 > repo
chmod 777 repo
pip3 install -i https://repo.huaweicloud.com/repository/pypi/simple requests

./repo init -u https://gitee.com/openharmony/manifest.git -b OpenHarmony-3.1-Release --no-clone-bundle
./repo sync -c --no-tags
./repo forall -c 'git lfs pull'

刷机之后可以进界面，
左上角显示：没有SIM卡X
右上角显示：点亮11%，时间：09:28
中下显示三个方向按键：前进-确认-后退

1刷入预编译的适配ROC-3568-PC的Openharmony3.1到AIO-3568J 1p5M-UART03_2022-07-13_17_31_24.log
2自己编译的Openharmony3.1到AIO-3568J 1p5M-UART03_2022-07-13_17_42_03.log

刷机的LOG：

刷机的LOG.zip (89.76 KB, 下载次数: 1, 售价: 1 灯泡)

作者: wb4916 时间: 2022-7-13 18:50

leoleo 发表于 2022-7-11 14:08
楼主请问您有OpenHarmony 3.1 Beta版本 aio-3568J的固件吗，实在根据流程做不出来了想拿现成固件烧写一下可 ...

链接：https://pan.baidu.com/s/1bIUKgXEK_fATVSormsOChg
提取码：cun5
--来自百度网盘超级会员V4的分享

AIO-3568J刷机OpenHarmony 3.1 Beta版本昨天已经测试OK了！
第一步：先刷机：AIO-3568J_Buildroot_v1.2.4a_220711.img
这个是LINUX的固件（Buildroot）

第二步：
刷机：
按照：parameter.txt刷机4个文件：parameter.txt、system.img、userdata.img、vendor.img

更多请参考：
https://gitee.com/tanpengju/openharmonydevice
Rockchip芯片单板适配OpenHarmony的方法

有任何问题，请直接留手机号码，我会电话支持你的！

作者: Firefly_Javier 时间: 2022-7-13 21:35

wb4916 发表于 2022-7-13 18:05
开发板使用用：AIO-3568J，使用第一帖提供的预编译固件：ROC-RK3568-PC-OpenHarmony-3.1-Release-GPT-202 ...

刷我的ROC-3568-PC的固件可以点亮AIOJ-RK3568？

作者: leoleo 时间: 2022-7-14 10:01

wb4916 发表于 2022-7-13 18:50
链接：https://pan.baidu.com/s/1bIUKgXEK_fATVSormsOChg
提取码：cun5
--来自百度网盘超级会员V4的 ...

您好！我的微信号码为zzy568636234，请问您有空可以加一下我吗

作者: wb4916 时间: 2022-7-14 14:46

Firefly_Javier 发表于 2022-7-13 21:35
刷我的ROC-3568-PC的固件可以点亮AIOJ-RK3568？

刷您的预编译固件：ROC-RK3568-PC-OpenHarmony-3.1-Release-GPT-20220620.7z
可以直接通过HDMI接显示器1080p显示。

限制于时间的关系，没有测试这个固件：ROC-RK3568-PC-OpenHarmony-3.1-Release-GPT-20220419.7z

由于公司没有买MIPI屏，就没有测试MIPI屏模式了！

作者: Firefly_Javier 时间: 2022-7-14 15:09

wb4916 发表于 2022-7-14 14:46
刷您的预编译固件：ROC-RK3568-PC-OpenHarmony-3.1-Release-GPT-20220620.7z
可以直接通过HDMI接显示器1 ...

这样子的吗？你确定是AIOJ-RK3568，我之前调试是有问题的，不管是HDMI还是MIPI都显示不了，但是用其他固件都能正常显示。你是否可以拍照发一下板子背面的版本信息给我，让我进一步确认。

作者: 张向权 时间: 2022-7-14 16:18
本帖最后由张向权于 2022-7-15 09:13 编辑

感谢分享

作者: wb4916 时间: 2022-7-14 17:14

Firefly_Javier 发表于 2022-7-14 15:09
这样子的吗？你确定是AIOJ-RK3568，我之前调试是有问题的，不管是HDMI还是MIPI都显示不了，但是用其他固 ...

你是否可以拍照发一下板子背面的版本信息给我，让我进一步确认。

请问需要拆卸核心板吗？
还是这样就可以了？

作者: Firefly_Javier 时间: 2022-7-14 18:52

wb4916 发表于 2022-7-14 17:14
你是否可以拍照发一下板子背面的版本信息给我，让我进一步确认。

请问需要拆卸核心板吗？

不好意思，这个看不到版本信息，拍下正面看看

作者: wb4916 时间: 2022-7-14 19:16

Firefly_Javier 发表于 2022-7-14 18:52
不好意思，这个看不到版本信息，拍下正面看看

正面如图，版本信息：（现在可以看清楚了吧？^_）
CORE-11J
CORE-3568J
V2.1 2021.03.25

作者: 陈振荣 时间: 2022-7-14 22:17
谢谢分享

作者: 陈振荣 时间: 2022-7-15 10:24
刷了楼主的固件，提示刷成功了，但是接上显示器，有信号，但是黑屏，我的设备是ROC-3568-PC

作者: 陈振荣 时间: 2022-7-15 10:43
我接的2K显示器和4K显示器，都有信号，但是都是黑屏

作者: Firefly_Javier 时间: 2022-7-15 10:46

陈振荣发表于 2022-7-15 10:43
我接的2K显示器和4K显示器，都有信号，但是都是黑屏

试下1080P的显示器

作者: 陈振荣 时间: 2022-7-15 10:49

Firefly_Javier 发表于 2022-7-15 10:46
试下1080P的显示器

1080P的显示器送人了

作者: wb4916 时间: 2022-7-15 20:14

陈振荣发表于 2022-7-15 10:24
刷了楼主的固件，提示刷成功了，但是接上显示器，有信号，但是黑屏，我的设备是ROC-3568-PC

你在深圳吗？我家和公司都有1080p的显示器。
可以帮你测试！^_

作者: 18508487624 时间: 2022-7-18 18:45
hdc_std这个是什么？

作者: sunsunsun000 时间: 2022-7-19 09:39
ubuntu:~/firefly$ repo init -u https://gitee.com/openharmony/manifest.git -b OpenHarmony-3.1-Release --no-clone-bundle
Usage: repo init -u url [options]

repo: error: no such option: --no-clone-bundle

这是什么错误呢？

作者: wb4916 时间: 2022-7-19 09:39

18508487624 发表于 2022-7-18 18:45
hdc_std这个是什么？

和华为的人聊了一下，类似于google开发的Andorid下的ADB，设备和PC之间的调试工具！
可以互传文件。

https://gitee.com/openharmony/developtools_hdc_standard
HDC-OpenHarmony设备连接器

作者: Firefly_Javier 时间: 2022-7-19 13:13

sunsunsun000 发表于 2022-7-19 09:39
ubuntu:~/firefly$ repo init -u https://gitee.com/openharmony/manifest.git -b OpenHarmony-3.1-Release ...

可能是系统版本的问题，最好用ubuntu18或者ubuntu20吧

欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)