Firefly开源社区

标题: rk3288 reload板子添加7.85寸屏幕开机启动不了 [打印本页]

作者: loger    时间: 2018-1-17 11:06
标题: rk3288 reload板子添加7.85寸屏幕开机启动不了
源码是最新的,添加之后启动信息如下:
DDR Version 1.00 20160530
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT


U-Boot 2014.10-RK3288-10 (Oct 08 2016 - 15:45:52)

CPU: rk3288
cpu version = 0
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
storage init OK!
Using default environment

GetParam
Load FDT from resource image.
power key: bank-0 pin-5
pmic:act8846
can't find dts node for pwm1
DCDC vdd_logic has been used, pwm regulator not init it.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2016-10-08#2.30
empty serial no.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
pll_src = 0, dclk_hz = 205000000, dclk_div = 2
edp pll locked
link training success.
unable to config video
no fuel gauge found
got recovery cmd from misc.
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel   @ 0x02000000 (0x006a17d0)
ramdisk  @ 0x05bf0000 (0x002ad1a8)
bootrk: do_bootm_linux...
   Loading Device Tree to 05600000, end 0561c335 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...
一直重复在 Starting kernel ...
请问是什么问题
作者: Samzzt    时间: 2018-5-22 10:08
感觉问个问题没人回答




欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/) Powered by Discuz! X3.1