|
【技术讨论】
Firefly-RK3288采用SD卡方式无法启动
发表于 2020-10-31 16:14:53
浏览:7311
|
回复:2
打印
只看该作者
[复制链接]
楼主
使用SD卡按照步骤将Ununtu16镜像烧写到SD卡后,插入SD卡启动后报错。请问这种问题是怎么导致的呢?该怎么解决呢?
- DDR Version 1.06 20171020
- In
- Channel a: DDR3 400MHz
- Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
- Channel b: DDR3 400MHz
- Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
- Memory OK
- Memory OK
- OUT
- Boot1 Release Time: Apr 11 2018 10:32:58, version: 2.36
- ChipType = 0x8, 227
- mmc2:cmd19,256
- SdmmcInit=2 0
- BootCapSize=2000
- UserCapSize=29820MB
- FwPartOffset=2000 , 2000
- mmc0:cmd5,32
- SdmmcInit=0 0
- BootCapSize=0
- UserCapSize=29566MB
- FwPartOffset=2000 , 0
- run on sd0
- StorageInit ok = 116413
- LOADER Check OK! 0x0, 179054
- TOS Check OK! 0x8400000, 253733
- Enter Trust OS
- INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-316-g7b4ec90 #59 Wed May 30 08:26:33 UTC 2018 arm)
- INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 1.3
- INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x0
- INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
- U-Boot 2017.09-g3947e40 (Feb 19 2019 - 10:20:55 +0800)
- Model: Firefly-RK3288
- DRAM: 4 GiB
- Relocation Offset is: fbe54000
- *** Warning - No MMC card found, using default environment
- dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
- switch to partitions #0, OK
- mmc1 is current device
- do_rkimg_test found IDB in SDcard
- Boot from SDcard
- boot mode: None
- DTB: rk-kernel.dtb
- Using kernel dtb
- vdd_log 1100000 uV
- Can't get mcu-pix-total
- Warn: can't find phy driver
- In: serial@ff690000
- Out: serial@ff690000
- Err: serial@ff690000
- Model: Firefly-RK3288 Board (Linux Opensource)
- failed to display uboot logo
- Net: No ethernet found.
- Unknown command 'usb' - try 'help'
- Hit any key to stop autoboot: 0
- android_bootloader_boot_flow Could not find misc partition
- Could not read from misc partition
- WARNING: Unable to load the BCB.
- ANDROID: reboot reason: "(none)"
- android_bootloader_boot_flow boot part load fail
- Android boot failed, error -1.
- =Booting Rockchip format image=
- boot_rockchip_image kernel or boot part info error
- switch to partitions #0, OK
- mmc1 is current device
- ** fs_devread read error - block
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- switch to partitions #0, OK
- mmc0(part 0) is current device
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- No ethernet found.
- missing environment variable: pxeuuid
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/00000000
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/0000000
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/000000
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/00000
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/0000
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/000
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/00
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/0
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default-arm-rockchip
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default-arm
- No ethernet found.
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default
- No ethernet found.
- Config file not found
- No ethernet found.
- No ethernet found.
- =>
复制代码 |
|