Firefly开源社区

打印 上一主题 下一主题

[技术讨论] AIO-3399J 4.4.194内核 UBUNTU 无法启动

60

积分

0

威望

0

贡献

技术小白

积分
60

AIO-3399J 4.4.194内核 UBUNTU 无法启动

发表于 2021-10-9 13:55:46      浏览:2432 | 回复:1        打印      只看该作者   [复制链接] 楼主
现阶段使用核心板和AIO3399J底板,官方固件和自己正常编译的固件运行到文件系统前会卡死。
调试中发现关闭内核设备树sdhci节点,EMMC不进行初始化系统能进入buildroot,从SD卡启动不使能EMMC则可以正常启动进入UBUNTU,此时运行DDR测试正常。
怀疑是EMMC问题,更换多种不同型号仍没有解决,而且固件的烧录与UBOOT的启动没有问题。
回复

使用道具 举报

60

积分

0

威望

0

贡献

技术小白

积分
60
发表于 2021-10-9 14:54:24        只看该作者  沙发
DDR Version 1.26 20210628
In
soft reset
SRX
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C172C1, stride = 0xD
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 428
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=7456MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 69317
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x10000
GPT part:  4, name:         recovery, start:0x1a000, size:0x10000
GPT part:  5, name:           backup, start:0x2a000, size:0x10000
GPT part:  6, name:           rootfs, start:0x5a000, size:0x46c200
GPT part:  7, name:         userdata, start:0x4c6200, size:0x9c9ddf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xf83b8
RunBL31 0x40000 @ 113814 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-266-gee81607c #1 Mon Aug 17 09:23:30 UTC 2020 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-gd67a144e2f #jincheng (Sep 15 2021 - 11:09:53 +0800)

Model: Firefly-RK3399 Board
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset: f5bcb000, fdt: f3dbf4d8
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 50Mhz
PartType: EFI
boot mode: recovery (misc)
Found DTB in recovery part
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
I2c0 speed: 400000Hz
PMIC:  RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 1100000 uV
In:    serial
Out:   serial
Err:   serial
Model: AIO-3399J Board (Linux Opensource)
Rockchip UBOOT DRM driver version: v1.0.1
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 800000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 24000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "recovery"
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 22483 KiB
RAM disk load addr 0x0a200000 size 8513 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831c626
No file: logo_kernel.bmp
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Total: 2942.270 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.194+ (jincheng@jincheng-PC) (local/internal-gitlab/rk3399/firefly: 44a8d8fabe4b94d62ed24e19b7946084a0a5fe29) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #3 SMP Thu Sep 9 14:41:07 CST 2021
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ecb000 s46312 r8192 d31512 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 991752
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  recovery androidboot.slot_suffix= androidboot.serialno=67788ad2eb252a1b  ro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xf7e82000-0xf7ec2000] (0MB)
[    0.000000] Memory: 3922832K/4030464K available (14078K kernel code, 1810K rwdata, 5340K rodata, 1216K init, 2013K bss, 107632K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009380000 - 0xffffff80094b0000   (  1216 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008e40000   ( 14080 KB)
[    0.000000]     .rodata : 0xffffff8008e40000 - 0xffffff8009380000   (  5376 KB)
[    0.000000]       .data : 0xffffff80094b0000 - 0xffffff8009674808   (  1811 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2c80000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2c10000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f2c20000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002210] Console: colour dummy device 80x25
[    0.002651] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003637] pid_max: default: 32768 minimum: 301
[    0.004156] Security Framework initialized
[    0.004618] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005259] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006667] Initializing cgroup subsys io
[    0.007073] Initializing cgroup subsys memory
[    0.007511] Initializing cgroup subsys devices
[    0.007942] Initializing cgroup subsys freezer
[    0.008382] Initializing cgroup subsys perf_event
[    0.008837] Initializing cgroup subsys net_prio
[    0.009275] Initializing cgroup subsys pids
[    0.009705] ftrace: allocating 51031 entries in 200 pages
[    0.132507] sched-energy: Sched-energy-costs installed from DT
[    0.133071] CPU0: update cpu_capacity 401
[    0.133509] ASID allocator initialised with 32768 entries
[    0.137191] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.138533] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.140730] Detected VIPT I-cache on CPU1
[    0.140760] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.140783] CPU1: using LPI pending table @0x00000000f2ed0000
[    0.140822] CPU1: update cpu_capacity 401
[    0.140826] CPU1: Booted secondary processor [410fd034]
[    0.141350] Detected VIPT I-cache on CPU2
[    0.141370] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.141392] CPU2: using LPI pending table @0x00000000f2f00000
[    0.141417] CPU2: update cpu_capacity 401
[    0.141421] CPU2: Booted secondary processor [410fd034]
[    0.141947] Detected VIPT I-cache on CPU3
[    0.141966] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.141988] CPU3: using LPI pending table @0x00000000f2f50000
[    0.142013] CPU3: update cpu_capacity 401
[    0.142017] CPU3: Booted secondary processor [410fd034]
[    0.142547] Detected PIPT I-cache on CPU4
[    0.142570] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.142604] CPU4: using LPI pending table @0x00000000f2f80000
[    0.142639] CPU4: update cpu_capacity 1024
[    0.142642] CPU4: Booted secondary processor [410fd082]
[    0.143171] Detected PIPT I-cache on CPU5
[    0.143189] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.143220] CPU5: using LPI pending table @0x00000000f2fc0000
[    0.143245] CPU5: update cpu_capacity 1024
[    0.143249] CPU5: Booted secondary processor [410fd082]
[    0.143331] Brought up 6 CPUs
[    0.155674] SMP: Total of 6 processors activated.
[    0.156124] CPU features: detected feature: GIC system register CPU interface
[    0.156811] CPU features: detected feature: 32-bit EL0 Support
[    0.157369] CPU: All CPU(s) started at EL2
[    0.157795] alternatives: patching kernel code
[    0.159562] devtmpfs: initialized
[    0.178314] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.179268] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.180297] xor: measuring software checksum speed
[    0.190533]    8regs     :  2860.000 MB/sec
[    0.200588]    8regs_prefetch:  2556.000 MB/sec
[    0.210640]    32regs    :  3208.000 MB/sec
[    0.220693]    32regs_prefetch:  2848.000 MB/sec
[    0.221136] xor: using function: 32regs (3208.000 MB/sec)
[    0.221669] pinctrl core: initialized pinctrl subsystem
[    0.223862] Failed to find legacy iommu devices
[    0.224668] NET: Registered protocol family 16
[    0.230338] cpuidle: using governor ladder
[    0.234347] cpuidle: using governor menu
[    0.234736] Registered FIQ tty driver
[    0.235623] vdso: 2 pages (1 code @ ffffff8008e46000, 1 data @ ffffff80094b4000)
[    0.236358] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.237420] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.261257] console [pstore-1] enabled
[    0.261630] pstore: Registered ramoops as persistent store backend
[    0.262223] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.265187] console [ttyFIQ0] enabled
[    0.265187] console [ttyFIQ0] enabled
[    0.265875] bootconsole [uart0] disabled
[    0.265875] bootconsole [uart0] disabled
[    0.266804] Registered fiq debugger ttyFIQ0
[    0.317309] raid6: int64x1  gen()   468 MB/s
[    0.334336] raid6: int64x1  xor()   410 MB/s
[    0.351476] raid6: int64x2  gen()   675 MB/s
[    0.368502] raid6: int64x2  xor()   593 MB/s
[    0.385646] raid6: int64x4  gen()   972 MB/s
[    0.402707] raid6: int64x4  xor()   666 MB/s
[    0.419832] raid6: int64x8  gen()   785 MB/s
[    0.436869] raid6: int64x8  xor()   630 MB/s
[    0.454004] raid6: neonx1   gen()   964 MB/s
[    0.471072] raid6: neonx1   xor()   669 MB/s
[    0.488124] raid6: neonx2   gen()  1273 MB/s
[    0.505230] raid6: neonx2   xor()  1000 MB/s
[    0.522304] raid6: neonx4   gen()  1726 MB/s
[    0.539398] raid6: neonx4   xor()  1195 MB/s
[    0.556495] raid6: neonx8   gen()  1691 MB/s
[    0.573584] raid6: neonx8   xor()  1261 MB/s
[    0.573974] raid6: using algorithm neonx4 gen() 1726 MB/s
[    0.574450] raid6: .... xor() 1195 MB/s, rmw enabled
[    0.574891] raid6: using intx1 recovery algorithm
[    0.579829] iommu: Adding device ff650000.vpu_service to group 0
[    0.580455] iommu: Adding device ff660000.rkvdec to group 1
[    0.581057] iommu: Adding device ff8f0000.vop to group 2
[    0.581627] iommu: Adding device ff900000.vop to group 3
[    0.582188] iommu: Adding device ff910000.rkisp1 to group 4
[    0.582784] iommu: Adding device ff920000.rkisp1 to group 5
[    0.583759] rk_iommu ff650800.iommu: can't get sclk
[    0.584433] rk_iommu ff660480.iommu: can't get sclk
[    0.585085] rk_iommu ff8f3f00.iommu: can't get sclk
[    0.585674] rk_iommu ff903f00.iommu: can't get sclk
[    0.586277] rk_iommu ff914000.iommu: can't get sclk
[    0.586869] rk_iommu ff924000.iommu: can't get sclk
[    0.587667] SCSI subsystem initialized
[    0.588370] usbcore: registered new interface driver usbfs
[    0.588895] usbcore: registered new interface driver hub
[    0.589459] usbcore: registered new device driver usb
[    0.589982] media: Linux media interface: v0.10
[    0.590435] Linux video capture interface: v2.00
[    0.590917] pps_core: LinuxPPS API ver. 1 registered
[    0.591359] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.592189] PTP clock support registered
[    0.593661] Advanced Linux Sound Architecture Driver Initialized.
[    0.594683] Bluetooth: Core ver 2.21
[    0.595021] NET: Registered protocol family 31
[    0.595428] Bluetooth: HCI device and connection manager initialized
[    0.596001] Bluetooth: HCI socket layer initialized
[    0.596442] Bluetooth: L2CAP socket layer initialized
[    0.596914] Bluetooth: SCO socket layer initialized
[    0.597844] nfc: nfc_init: NFC Core ver 0.1
[    0.598252] NET: Registered protocol family 39
[    0.598769] rockchip-cpuinfo cpuinfo: Serial         : 67788ad2eb252a1b
[    0.600134] clocksource: Switched to clocksource arch_sys_counter
[    0.651409] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.652331] NET: Registered protocol family 2
[    0.653117] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.654026] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.655524] TCP: Hash tables configured (established 32768 bind 32768)
[    0.656211] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.656908] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.657836] NET: Registered protocol family 1
[    0.658515] RPC: Registered named UNIX socket transport module.
[    0.659039] RPC: Registered udp transport module.
[    0.659473] RPC: Registered tcp transport module.
[    0.659891] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.661115] Trying to unpack rootfs image as initramfs...
[    1.112997] Freeing initrd memory: 8512K
[    1.114088] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.114915] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.118367] audit: initializing netlink subsys (disabled)
[    1.118873] audit: type=2000 audit(1.030:1): initialized
[    1.119759] Initialise system trusted keyring
[    1.128259] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.129551] NFS: Registering the id_resolver key type
[    1.130020] Key type id_resolver registered
[    1.130409] Key type id_legacy registered
[    1.130783] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.132053] ntfs: driver 2.1.32 [Flags: R/O].
[    1.132832] fuse init (API version 7.23)
[    1.133531] SGI XFS with security attributes, no debug enabled
[    1.139456] NET: Registered protocol family 38
[    1.139878] Key type asymmetric registered
[    1.140270] Asymmetric key parser 'x509' registered
[    1.140869] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.141768] io scheduler noop registered
[    1.142143] io scheduler deadline registered
[    1.142563] io scheduler cfq registered (default)
[    1.144518] phy phy-ff770000.syscon:usb2-phy@e450.1: Failed to get VBUS supply regulator
[    1.146099] phy phy-ff770000.syscon:usb2-phy@e460.3: Failed to get VBUS supply regulator
[    1.151451] ace test_init function.
[    1.151939] ace test_init end.ret=0
[    1.152637] radar end.ret=0
[    1.155382] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.155977] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.156587] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.157166] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.157774] PCI host bridge /pcie@f8000000 ranges:
[    1.158225]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.158683]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    1.701191] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.701804] rockchip-pcie f8000000.pcie: deferred probe failed
[    1.702535] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.704098] Module initialized.
[    1.704862] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    1.705729] rk-vcodec ff650000.vpu_service: probe device
[    1.706447] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    1.707594] rk-vcodec ff650000.vpu_service: could not find power_model node
[    1.708225] rk-vcodec ff650000.vpu_service: init success
[    1.708988] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    1.709926] rk-vcodec ff660000.rkvdec: probe device
[    1.710582] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    1.711557] rk-vcodec ff660000.rkvdec: could not find power_model node
[    1.712154] rk-vcodec ff660000.rkvdec: init success
[    1.714054] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.714745] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.717004] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.717692] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.719539] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.720753] pwm-regulator: supplied by vcc5v0_sys
[    1.721865] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.723025] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    1.725593] [drm] Initialized drm 1.1.0 20060810
[    1.729757] [drm] Rockchip DRM driver version: v1.0.1
[    1.730534] rockchip-drm display-subsystem: dmc is disabled
[    1.731338] rockchip-vop ff900000.vop: missing rockchip,grf property
[    1.732177] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008f040f0)
[    1.732919] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    1.733667] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008f040f0)
[    1.734620] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    1.735252] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.736036] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.737706] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008ef8948)
[    1.738464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.739044] [drm] No driver support for vblank timestamp query.
[    1.739827] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
[    1.740550] rockchip-drm display-subsystem: can't not find any loader display
[    1.741195] rockchip-drm display-subsystem: failed to show loader logo
[    1.742058] Freeing drm_logo memory: 1236K
[    1.742443] rockchip-drm display-subsystem: No connectors reported connected with modes
[    1.743159] [drm] Cannot find any crtc or sizes - going 1024x768
[    1.754149] Console: switching to colour frame buffer device 128x48
[    1.760742] rockchip-drm display-subsystem: fb0:  frame buffer device
[    1.769703] mali ff9a0000.gpu: Failed to get regulator
[    1.770176] mali ff9a0000.gpu: Power control initialization failed
[    1.771101] Unable to detect cache hierarchy for CPU 0
[    1.772364] brd: module loaded
[    1.777881] loop: module loaded
[    1.778712] zram: Added device: zram0
[    1.779322] lkdtm: No crash points registered, enable through debugfs
[    1.780260] Loading dl1825 driver
[    1.782087] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    1.783499] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max
[    1.954456] wk2xxx_serial_init()
[    1.954751] wk2xxx_request_port
[    1.955037] ttysWK0 at I/O 0x1 (irq = 100, base_baud = 460800) is a wk2xxx
[    1.955877] uart_add_one_port success for line i:= 0 with right 0
[    1.956426] wk2xxx_request_port
[    1.956711] ttysWK1 at I/O 0x2 (irq = 100, base_baud = 460800) is a wk2xxx
[    1.957498] uart_add_one_port success for line i:= 1 with right 0
[    1.958032] wk2xxx_request_port
[    1.958331] ttysWK2 at I/O 0x3 (irq = 100, base_baud = 460800) is a wk2xxx
[    1.959107] uart_add_one_port success for line i:= 2 with right 0
[    1.959664] wk2xxx_request_port
[    1.959949] ttysWK3 at I/O 0x4 (irq = 100, base_baud = 460800) is a wk2xxx
[    1.960731] uart_add_one_port success for line i:= 3 with right 0
[    1.961289] uart_add_one_port = 0x0
[    1.961626] register spi return v = :0
[    1.962456] tun: Universal TUN/TAP device driver, 1.6
[    1.962910] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.964386] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    1.965079] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.965720] rk_gmac-dwmac fe300000.ethernet: TX delay(0x31).
[    1.966230] rk_gmac-dwmac fe300000.ethernet: RX delay(0x24).
[    1.966745] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.967467] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    1.968081] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.973640] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.974257] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.974710]  Ring mode enabled
[    1.974990]  DMA HW capability register supported
[    1.975405]  Normal descriptors
[    1.975711]  RX Checksum Offload Engine supported (type 2)
[    1.976204]  Wake-Up On Lan supported
[    1.976561]  Enable RX Mitigation via HW Watchdog Timer
[    2.045736] libphy: stmmac: probed
[    2.046049] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    2.046630] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    2.049199] usbcore: registered new interface driver rtl8192cu
[    2.049787] usbcore: registered new interface driver rndis_wlan
[    2.050593] usbcore: registered new interface driver mt7601u
[    2.051188] Rockchip WiFi SYS interface (V1.00) ...
[    2.051711] usbcore: registered new interface driver rtl8150
[    2.052284] usbcore: registered new interface driver r8152
[    2.052832] usbcore: registered new interface driver asix
[    2.053370] usbcore: registered new interface driver ax88179_178a
[    2.053963] usbcore: registered new interface driver cdc_ether
[    2.054545] usbcore: registered new interface driver rndis_host
[    2.055160] usbcore: registered new interface driver cdc_ncm
[    2.055710] usbcore: registered new interface driver qmi_wwan
[    2.056282] usbcore: registered new interface driver cdc_mbim
[    2.062201] rockchip-dwc3 usb0: fail to get drvdata hcd
[    2.067811] rockchip-dwc3 usb1: fail to get drvdata hcd
[    2.070082] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.070696] ehci-pci: EHCI PCI platform driver
[    2.071172] ehci-platform: EHCI generic platform driver
[    2.075460] ehci-platform fe380000.usb: EHCI Host Controller
[    2.076307] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    2.077121] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    2.083185] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    2.083952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.084575] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.085227] usb usb1: Product: EHCI Host Controller
[    2.085661] usb usb1: Manufacturer: Linux 4.4.194+ ehci_hcd
[    2.086173] usb usb1: SerialNumber: fe380000.usb
[    2.087210] hub 1-0:1.0: USB hub found
[    2.087584] hub 1-0:1.0: 1 port detected
[    2.092119] ehci-platform fe3c0000.usb: EHCI Host Controller
[    2.092813] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    2.093628] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    2.100155] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    2.100847] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.101467] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.102105] usb usb2: Product: EHCI Host Controller
[    2.102546] usb usb2: Manufacturer: Linux 4.4.194+ ehci_hcd
[    2.103046] usb usb2: SerialNumber: fe3c0000.usb
[    2.103995] hub 2-0:1.0: USB hub found
[    2.104389] hub 2-0:1.0: 1 port detected
[    2.105669] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.106291] ohci-platform: OHCI generic platform driver
[    2.107188] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    2.107968] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    2.108748] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    2.164356] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.164966] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.165619] usb usb3: Product: Generic Platform OHCI controller
[    2.166156] usb usb3: Manufacturer: Linux 4.4.194+ ohci_hcd
[    2.166658] usb usb3: SerialNumber: fe3a0000.usb
[    2.167669] hub 3-0:1.0: USB hub found
[    2.168042] hub 3-0:1.0: 1 port detected
[    2.169108] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    2.169961] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    2.170775] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    2.226336] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.226943] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.227597] usb usb4: Product: Generic Platform OHCI controller
[    2.228122] usb usb4: Manufacturer: Linux 4.4.194+ ohci_hcd
[    2.228635] usb usb4: SerialNumber: fe3e0000.usb
[    2.229636] hub 4-0:1.0: USB hub found
[    2.230013] hub 4-0:1.0: 1 port detected
[    2.231849] usbcore: registered new interface driver cdc_acm
[    2.232363] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.233136] usbcore: registered new interface driver cdc_wdm
[    2.233700] usbcore: registered new interface driver uas
[    2.234348] usbcore: registered new interface driver usb-storage
[    2.234986] usbcore: registered new interface driver usbserial
[    2.235568] usbcore: registered new interface driver usbserial_generic
[    2.236190] usbserial: USB Serial support registered for generic
[    2.236776] usbcore: registered new interface driver ch341
[    2.237316] usbserial: USB Serial support registered for ch341-uart
[    2.237925] usbcore: registered new interface driver cp210x
[    2.238467] usbserial: USB Serial support registered for cp210x
[    2.239083] usbcore: registered new interface driver ftdi_sio
[    2.239637] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.240546] usbcore: registered new interface driver keyspan
[    2.241075] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.241816] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.242505] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.243197] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.243903] usbcore: registered new interface driver option
[    2.244446] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.245413] usbcore: registered new interface driver oti6858
[    2.245941] usbserial: USB Serial support registered for oti6858
[    2.246545] usbcore: registered new interface driver pl2303
[    2.247077] usbserial: USB Serial support registered for pl2303
[    2.247685] usbcore: registered new interface driver qcserial
[    2.248242] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.248939] usbcore: registered new interface driver sierra
[    2.249484] usbserial: USB Serial support registered for Sierra USB modem
[    2.251925] usbcore: registered new interface driver usbtouchscreen
[    2.252935] .. rk pwm remotectl v1.1 init
[    2.253624] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    2.254834] sensor_register_slave:mma8452,id=17
[    2.255272] sensor_register_slave:lis3dh,id=7
[    2.255666] sensor_register_slave:mma7660,id=18
[    2.256082] sensor_register_slave:lsm303d,id=22
[    2.256509] sensor_register_slave:gs_mc3230,id=23
[    2.256928] [Gsensor]   gsensor_init
[    2.257274] sensor_register_slave:mpu6880_acc,id=24
[    2.257714] sensor_register_slave:mpu6500_acc,id=25
[    2.258162] sensor_register_slave:lsm330_acc,id=26
[    2.258601] sensor_register_slave:akm8975,id=30
[    2.259017] sensor_register_slave:akm8963,id=31
[    2.259444] sensor_register_slave:l3g4200d,id=45
[    2.259860] sensor_register_slave:l3g20d,id=46
[    2.260275] sensor_register_slave:ewtsa,id=47
[    2.260680] sensor_register_slave:lsm330_gyro,id=51
[    2.261119] sensor_register_slave:cm3217,id=53
[    2.261534] sensor_register_slave:cm3218,id=54
[    2.262559] i2c /dev entries driver
[    2.264747] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    2.265484] fan53555-reg: supplied by vcc5v0_sys
[    2.268586] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    2.269292] fan53555-reg: supplied by vcc5v0_sys
[    2.272457] rk808 0-001b: Pmic Chip id: 0x0
[    2.276299] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    2.276920] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    2.277607] DCDC_REG1: supplied by vcc3v3_sys
[    2.278881] DCDC_REG2: supplied by vcc3v3_sys
[    2.279998] DCDC_REG3: supplied by vcc3v3_sys
[    2.280791] DCDC_REG4: supplied by vcc3v3_sys
[    2.281756] LDO_REG1: supplied by vcc3v3_sys
[    2.283423] LDO_REG2: supplied by vcc3v3_sys
[    2.284907] LDO_REG3: supplied by vcc3v3_sys
[    2.286407] LDO_REG4: supplied by vcc3v3_sys
[    2.287898] LDO_REG5: supplied by vcc3v3_sys
[    2.289424] LDO_REG6: supplied by vcc3v3_sys
[    2.290915] LDO_REG7: supplied by vcc3v3_sys
[    2.292463] LDO_REG8: supplied by vcc3v3_sys
[    2.293957] SWITCH_REG1: supplied by vcc3v3_sys
[    2.294771] SWITCH_REG2: supplied by vcc3v3_sys
[    2.299010] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    2.300241] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009ad8000
[    2.302037] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009ada000
[    2.303628] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009adc000
[    2.305849] IR NEC protocol handler initialized
[    2.307409] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[    2.307998] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[    2.310897] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[    2.311501] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[    2.314268] usbcore: registered new interface driver npu_acm
[    2.314874] usbcore: registered new interface driver uvcvideo
[    2.315399] USB Video Class driver (1.1.1)
[    2.318620] Boot mode: normal
[    2.321021] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    2.322009] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    2.324211] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.325213] rtk_btusb: Realtek Bluetooth USB driver ver 3.1.a2fd257.20190430-133301
[    2.325896] rtk_btcoex: rtk_btcoex_init: version: 1.2
[    2.326361] rtk_btcoex: create workqueue
[    2.326711] rtk_btcoex: Coex over UDP
[    2.327441] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[    2.328052] usbcore: registered new interface driver rtk_btusb
[    2.328602] Bluetooth: Virtual HCI driver ver 1.5
[    2.329193] Bluetooth: HCI UART driver ver 2.3
[    2.329593] Bluetooth: HCI UART protocol H4 registered
[    2.330047] Bluetooth: HCI UART protocol LL registered
[    2.330567] Bluetooth: HCI UART protocol ATH3K registered
[    2.331116] usbcore: registered new interface driver bfusb
[    2.331694] usbcore: registered new interface driver btusb
[    2.332870] cpu cpu0: bin=1
[    2.333215] cpu cpu0: leakage=16
[    2.346266] cpu cpu0: temp=51111, pvtm=143756 (143096 + 660)
[    2.347118] cpu cpu0: pvtm-volt-sel=1
[    2.347540] cpu cpu0: bin-scale=34
[    2.348332] cpu cpu4: bin=1
[    2.348660] cpu cpu4: leakage=27
[    2.361083] cpu cpu4: temp=51111, pvtm=151678 (151328 + 350)
[    2.361714] cpu cpu4: pvtm-volt-sel=1
[    2.362106] cpu cpu4: bin-scale=17
[    2.364039] cpu cpu0: avs=0
[    2.364454] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    2.365934] cpu cpu0: failed to find power_model node
[    2.367807] cpu cpu4: avs=0
[    2.368228] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    2.370626] cpu cpu4: failed to find power_model node
[    2.372233] sdhci: Secure Digital Host Controller Interface driver
[    2.372778] sdhci: Copyright(c) Pierre Ossman
[    2.373198] Synopsys Designware Multimedia Card Interface Driver
[    2.375048] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    2.375725] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    2.376353] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    2.376915] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    2.377801] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.378637] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    2.379199] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    2.381052] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    2.381731] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    2.382356] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    2.382906] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    2.383788] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.384660] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    2.386473] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.388799] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    2.389343] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    2.406222] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    2.420066] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    2.422207] hidraw: raw HID events driver (C) Jiri Kosina
[    2.423097] usbcore: registered new interface driver usbhid
[    2.423627] usbhid: USB HID core driver
[    2.424118] inv_mpu_iio: inv_mpu_init:746
[    2.427671] usbcore: registered new interface driver snd-usb-audio
[    2.429734] rt5640 1-001c: Can not read property hp_det_gpio
[    2.430250] rt5640 1-001c: Can not read property: linein-mute.
[    2.447572] rk-hdmi-dp-sound hdmi-dp-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[    2.451169] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.452194] IPVS: Registered protocols (TCP, UDP)
[    2.452661] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    2.453425] IPVS: Creating netns size=2104 id=0
[    2.453865] IPVS: ipvs loaded.
[    2.454165] IPVS: [rr] scheduler registered.
[    2.454815] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.455395] Initializing XFRM netlink socket
[    2.456463] NET: Registered protocol family 10
[    2.458068] NET: Registered protocol family 17
[    2.458501] NET: Registered protocol family 15
[    2.458926] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.460060] Bridge firewalling registered
[    2.460761] Bluetooth: RFCOMM socket layer initialized
[    2.461261] Bluetooth: RFCOMM ver 1.11
[    2.461608] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.462181] Bluetooth: HIDP socket layer initialized
[    2.462673] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.463500] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.463986] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[    2.464614] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.465250] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.465985] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    2.466796] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.467446] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.467908] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.468393] [BT_RFKILL]: Enter rfkill_rk_init
[    2.469321] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    2.470066] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    2.470796] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    2.471528] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    2.471716] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    2.472656] mmcblk0: mmc0:0001 88A378 7.28 GiB
[    2.473436] mmcblk0boot0: mmc0:0001 88A378 partition 1 4.00 MiB
[    2.474229] [BT_RFKILL]: Request irq for bt wakeup host
[    2.474717] mmcblk0boot1: mmc0:0001 88A378 partition 2 4.00 MiB
[    2.474740] [BT_RFKILL]: ** disable irq
[    2.474873] [BT_RFKILL]: bt_default device registered.
[    2.474964] Key type dns_resolver registered
[    2.475265] sensor_register_slave:mpu6880_gyro,id=50
[    2.475648] ov13850 1-0036: driver version: 00.01.03
[    2.478060] mmcblk0rpmb: mmc0:0001 88A378 partition 3 4.00 MiB
[    2.478762] ov13850 1-0036: write SCCB_ID failed
[    2.479379] ov13850: probe of 1-0036 failed with error -5
[    2.480204] ov13850 1-0046: driver version: 00.01.03
[    2.483088] ov13850 1-0046: write SCCB_ID failed
[    2.483661] ov13850: probe of 1-0046 failed with error -5
[    2.485256] Registered cp15_barrier emulation handler
[    2.485797] Registered setend emulation handler
[    2.487464] Loading compiled-in X.509 certificates
[    2.490016] Btrfs loaded
[    2.491570] rga2: Driver loaded successfully ver:3.02
[    2.492372] rga2: Module initialized.
[    2.494273] mali ff9a0000.gpu: leakage=24
[    2.507963] mali ff9a0000.gpu: temp=51111, pvtm=123336 (123216 + 120)
[    2.509868]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.510493] mali ff9a0000.gpu: pvtm-volt-sel=1
[    2.511785] mali ff9a0000.gpu: avs=0
[    2.513560] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    2.514747] mali ff9a0000.gpu: Protected mode not available
[    2.516310] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    2.517028] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    2.518457] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    2.520915] mali ff9a0000.gpu: Probed as mali0
[    2.522173] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
[    2.522783] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.523444] usb 2-1: Product: USB 2.0 Hub [MTT]
[    2.525127] hub 2-1:1.0: USB hub found
[    2.525938] hub 2-1:1.0: 7 ports detected
[    2.529112] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    2.530009] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    2.531187] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    2.532037] xhci-hcd xhci-hcd.9.auto: irq 229, io mem 0xfe800000
[    2.532988] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.533635] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.534309] usb usb5: Product: xHCI Host Controller
[    2.534757] usb usb5: Manufacturer: Linux 4.4.194+ xhci-hcd
[    2.535297] usb usb5: SerialNumber: xhci-hcd.9.auto
[    2.536920] hub 5-0:1.0: USB hub found
[    2.537412] hub 5-0:1.0: 1 port detected
[    2.538600] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    2.539378] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    2.540202] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.541105] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    2.541763] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.542433] usb usb6: Product: xHCI Host Controller
[    2.542880] usb usb6: Manufacturer: Linux 4.4.194+ xhci-hcd
[    2.543404] usb usb6: SerialNumber: xhci-hcd.9.auto
[    2.544704] hub 6-0:1.0: USB hub found
[    2.545099] hub 6-0:1.0: 1 port detected
[    2.552444] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    2.553113] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 7
[    2.553944] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    2.554766] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe900000
[    2.555519] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    2.556138] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.556776] usb usb7: Product: xHCI Host Controller
[    2.557221] usb usb7: Manufacturer: Linux 4.4.194+ xhci-hcd
[    2.557721] usb usb7: SerialNumber: xhci-hcd.10.auto
[    2.558637] hub 7-0:1.0: USB hub found
[    2.559001] hub 7-0:1.0: 1 port detected
[    2.559660] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    2.560309] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 8
[    2.561044] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.561863] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    2.562482] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.563120] usb usb8: Product: xHCI Host Controller
[    2.563562] usb usb8: Manufacturer: Linux 4.4.194+ xhci-hcd
[    2.564061] usb usb8: SerialNumber: xhci-hcd.10.auto
[    2.564934] hub 8-0:1.0: USB hub found
[    2.565333] hub 8-0:1.0: 1 port detected
[    2.566944] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    2.567632] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    2.568258] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    2.568788] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    2.569672] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.570481] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    2.571026] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    2.571906] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    2.585168] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.598785] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    2.600368] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    2.601061] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    2.601684] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    2.602239] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    2.603119] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.603975] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    2.604924] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq
[    2.605629] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    2.606954] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    2.620391] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.634194] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    2.648228] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[    2.659580] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.662110] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.664550] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1
[    2.665506] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.668526]
[    2.668616] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.10 (r)
[    2.668624] ======== dhd_wlan_init_plat_data ========
[    2.668630] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    2.668644] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=69, oob_irq_flags=0x414
[    2.668649] dhd_wlan_init_gpio: WL_REG_ON=-1
[    2.668653] dhd_wifi_platform_load: Enter
[    2.668680] Power-up adapter 'DHD generic adapter'
[    2.668758] wifi_platform_set_power = 1
[    2.668763] ======== PULL WL_REG_ON(-1) HIGH! ========
[    2.668768] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    2.668774] [WLAN_RFKILL]: wifi turn on power. -1
[    2.671656] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.674700] =======================================================
[    2.675314] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    2.675905] =======================================================
[    2.676519] Realtek 8723DU USB WiFi driver (Powered by Rockchip) init.
[    2.677158] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    2.677615] [WLAN_RFKILL]: wifi turn on power. -1
[    2.677632] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[    2.678604] RTW: module init start
[    2.678922] RTW: rtl8723du v5.6.5.1_34252.20190703_COEX20181130-2e2e
[    2.679529] RTW: build time: Sep  9 2021 14:40:38
[    2.679985] RTW: rtl8723du BT-Coex version = COEX20181130-2e2e
[    2.680883] usbcore: registered new interface driver rtl8723du
[    2.681488] RTW: module init ret=0
[    2.683744] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[    2.685317] ==gsl_ts_init==
[    2.685778] GSLX680 Enter gsl_ts_probe
[    2.686186] ==kzalloc success=
[    2.734889] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    2.969231] wifi_platform_bus_enumerate device present 1
[    2.969722] ======== Card detection to detect SDIO card! ========
[    2.970365] mmc1:mmc host rescan start!
[    2.980869] vendor storage:20190527 ret = 0
[    2.994362] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 173
[    3.006285] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    3.006861] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    3.024797] bcmsdh_register: register client driver
[    3.025525] bcmsdh_sdmmc_probe: Enter num=1
[    3.026077] bcmsdh_sdmmc_probe: Enter num=2
[    3.026496] bus num (host idx)=1, slot num (rca)=1
[    3.026930] found adapter info 'DHD generic adapter'
[    3.027467] sdioh_attach: set sd_f2_blocksize 256
[    3.027940] sdioh_attach: sd clock rate = 0
[    3.028637] dhdsdio_probe : no mutex held. set lock
[    3.029256] F1 signature read @0x18000000=0x17224356
[    3.034897] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[    3.036239] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[    3.036968] dhd_conf_set_chiprev: chip=0x4354, chiprev=2
[    3.037836] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
[    3.039787] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
[    3.040729] wl_escan_attach: Enter
[    3.041080] wl_escan_init: Enter
[    3.042024] wl_create_event_handler(): thread:wl_escan_handler:a5 started
[    3.042967] tsk Enter, tsk = 0xffffffc0ef5f01b0
[    3.043520] dhd_attach(): thread:dhd_watchdog_thread:a6 started
[    3.044943] dhd_attach(): thread:dhd_dpc:a7 started
[    3.046233] dhd_attach(): thread:dhd_rxf:a8 started
[    3.046691] dhd_deferred_work_init: work queue initialized
[    3.047205] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[    3.047839] dhd_bus_set_default_min_res_mask: Unhandled chip id
[    3.048583] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[    3.057526] Dongle Host Driver, version 1.579.77.41.10 (r)
[    3.058906] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
[    3.059427] Register interface [wlan0]  MAC: d4:12:43:a0:36:18
[    3.059427]
[    3.060533] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 0
[    3.061246] dhd_wl_ioctl: returning as busstate=0
[    3.061671] dhd_dbg_detach_pkt_monitor, 2204
[    3.062061] dhd_bus_devreset: == Power OFF ==
[    3.062728] bcmsdh_oob_intr_unregister: Enter
[    3.063118] bcmsdh_oob_intr_unregister: irq is not registered
[    3.063656] dhd_txglom_enable: enable 0
[    3.064010] dhd_conf_set_txglom_params: txglom_mode=copy
[    3.064507] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
[    3.065101] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
[    3.065754] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
[    3.066380] dhd_bus_devreset:  WLAN OFF DONE
[    3.066795] wifi_platform_set_power = 0
[    3.067157] ======== PULL WL_REG_ON(-1) LOW! ========
[    3.067611] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    3.068042] [WLAN_RFKILL]: wifi shut off power.
[    3.068466] dhdsdio_probe : the lock is released.
[    3.069050] dhd_module_init: Exit err=0
[    3.553350] gsl_ts_probe--1375, i2c_master_recv fail
[    3.553954] ret=0
[    3.556007] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:53:10 UTC (1358499190)
[    3.596065] vcc_mipi: disabling
[    3.596376] dvdd_1v2: disabling
  u?  
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表