ROC-RK3568-PC 编译固件无法完整启动

晨曦RT

自己编译的固件，感觉文件系统加载失败了，一直卡在下面这个地方
[   13.541559] RKNPU fde40000.npu: pvtm-volt-sel=1
[   13.542918] RKNPU fde40000.npu: avs=0
[   13.544063] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[   13.544827] RKNPU fde40000.npu: failed to find power_model node
[   13.545357] RKNPU fde40000.npu: RKNPU: failed to initialize power model
[   13.545944] RKNPU fde40000.npu: RKNPU: failed to get dynamic-coefficient
[   13.549294] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.559410] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   13.561296] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[   13.561899] rockchip-suspend not set sleep-mode-config for mem-lite
[   13.562455] rockchip-suspend not set wakeup-config for mem-lite
[   13.562984] rockchip-suspend not set sleep-mode-config for mem-ultra
[   13.563583] rockchip-suspend not set wakeup-config for mem-ultra
[   13.565336] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 413; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '20:36:17', on 'May 26 2023'.
[   13.568508] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   13.569276] cfg80211: failed to load regulatory.db
[   13.570459] Mali:
[   13.570462] Mali device driver loaded
[   13.571078] rkisp rkisp-vir0: clear unready subdev num: 4
[   13.571563] rockchip-csi2-dphy0: No link between dphy and sensor
[   13.572782] rockchip-csi2-dphy0: No link between dphy and sensor
[   13.573396] rkisp-vir0: update sensor failed
v
  13.580062]



而从官司网下载的ROC-RK3568-PC-RTLINUX_Ubuntu20.04-r240_v1.3.2b_230403 固件能正常启动。请教这个是什么原因，需要怎么解决？

谢谢！！

晨曦RT

哦哦，没人顶， 自己先顶上来

xianjun75

学习中