刷miniroot后，系统不断重启

yaoq

在RK3288 先刷了Firefly-RK3288_Ubuntu14.04_201708151701.img镜像， 然后根据wiki：

刷了0930版本的miniroot固件，http://www.t-firefly.com/downloa ... x-boot-miniroot.img

结果看到系统不断重启，会是什么问题呢？

1. DDR Version 1.00 20160530
   
2. In
   
3. SRX
   
4. Channel a: DDR3 200MHz
   
5. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
   
6. Channel b: DDR3 200MHz
   
7. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
   
8. OUT
   
9. 
   
10. 
    
11. U-Boot 2014.10-RK3288-10 (May 27 2017 - 16:08:14)
    
12. 
    
13. CPU: rk3288
    
14. cpu version = 0
    
15. CPU's clock information:
    
16.     arm pll = 600000000HZ
    
17.     periph pll = 297000000HZ
    
18.     ddr pll = 200000000HZ
    
19.     codec pll = 384000000HZ
    
20. Board:  Rockchip platform Board
    
21. DRAM:  Found dram banks: 1
    
22. Adding bank:0000000000000000(0000000080000000)
    
23. 128 MiB                                                             +-----------------------------+
    
24. GIC CPU mask = 0x00000001                                           |                             |
    
25. SdmmcInit = 0 400                                                   |  Cannot open /dev/ttyUSB0!  |
    
26. SdmmcInit = 2 0                                                     |                             |
    
27. storage init OK!                                                    +-----------------------------+
    
28. Using default environment
    
29. 
    
30. GetParam
    
31. Load FDT from resource image.
    
32. power key: bank-0 pin-5
    
33. pmic:act8846
    
34. can't find dts node for pwm1
    
35. DCDC vdd_logic has been used, pwm regulator not init it.
    
36. Can't find dts node for fuel guage cw201x
    
37. SecureBootEn = 0, SecureBootLock = 0
    
38. 
    
39. #Boot ver: 2017-05-27#2.30
    
40. empty serial no.
    
41. checkKey
    
42. vbus = 1
    
43. no fuel gauge found
    
44. no fuel gauge found
    
45. read logo on state from dts [0]
    
46. no fuel gauge found
    
47. Hit any key to stop autoboot:  0
    
48. load fdt from resouce.
    
49. Secure Boot state: 0
    
50. kernel   @ 0x02000000 (0x0060b2a0)
    
51. ramdisk  @ 0x05bf0000 (0x00199964)
    
52. bootrk: do_bootm_linux...
    
53.    Loading Device Tree to 05600000, end 0561c522 ... OK
    
54. Add bank:0000000000000000, 0000000080000000
    
55. 
    
56. Starting kernel ...
    
57. 
    

复制代码