Firefly开源社区
标题:
GNetfc网络运行出现"段错误"
[打印本页]
作者:
had_in
时间:
2019-6-5 18:19
标题:
GNetfc网络运行出现"段错误"
==> Preparing data..
Training and validation data exist already
==> Building model from scratch..
Epoch: 0
[================================================================>] Step: 1s585ms | To 114/114 ms | Loss: 0.643 | Acc: 66.484% (605/910)
[================================================================>] Step: 18ms | T 115/115 ms | Loss: 0.561 | Acc: 77.391% (178/230)
Saving..
* Saved checkpoint to ./checkpoint/gti_2801_gnetfc.t7
Epoch: 1
[================================================================>] Step: 117ms | T 114/114 ms | Loss: 0.543 | Acc: 80.220% (730/910))
[================================================================>] Step: 19ms | T 115/115 ms | Loss: 0.586 | Acc: 73.478% (169/230)
==> Slicing network..
==> Absorbing batch normalization..
==> Merging gain..
==> Dumping CNN parameters into .txt files..
GTI Model gnetfc: output channel of layer 16 extended from 2 to 256
==> Start to generate the chip file..
- 1559729304260 -140495802324736- 2-:GTI SDK 3.5.0 built on: Sep 7 2018
- 1559729304263 -140495802324736- 0-:Could not find any available device
==> Start to perform batch inference..
段错误 (核心已转储)
复制代码
GNet1和GNet18能够正常训练并且推断,GNetfc训练正常,推断出现上述问题,最后定位到调用gClassify出现的问题,但是该函数在封装的so文件,请问这个可能什么情况。是我配置有问题吗?训练情况下需要插入神经棒吗?另外GTI_CHIP_MODE参数是指什么,GNetfc网络的时候,GTI_CHIP_MODE参数为2,其他情况下指为0,我并没有在文档中看到相关的介绍.
作者:
rany
时间:
2019-6-10 14:41
PLAI刚解压出来的时候就是gnetfc的配置,此时运行也会出现错误吗?
GTI_CHIP_MODE对应Image output format,可以查看nets/netConfig_2801_gnetfc.txt
欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)
Powered by Discuz! X3.1