我的新板子遇到点问题

ch122633

我烧录的韦山东的sdcard.img镜像，提示如下信息。请问是什么情况

1. DDR Version 1.00 20160530
   
2. In
   
3. Channel a: DDR3 200MHz
   
4. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
   
5. Channel b: DDR3 200MHz
   
6. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
   
7. Memory OK
   
8. Memory OK
   
9. OUT
   
10. 
    
11. 
    
12. U-Boot 2014.10-RK3288-10 (Nov 20 2017 - 17:19:35)
    
13. 
    
14. CPU: rk3288
    
15. cpu version = 0
    
16. CPU's clock information:
    
17.     arm pll = 600000000HZ
    
18.     periph pll = 297000000HZ
    
19.     ddr pll = 200000000HZ
    
20.     codec pll = 384000000HZ
    
21. Board:  Rockchip platform Board
    
22. DRAM:  Found dram banks: 1
    
23. Adding bank:0000000000000000(0000000080000000)
    
24. 128 MiB
    
25. GIC CPU mask = 0x00000001
    
26. SdmmcInit = 0 0
    
27. SDCard Update.
    
28. storage init OK!
    
29. Using default environment
    
30. 
    
31. GetParam
    
32. W: Invalid Parameter's tag (0x00000000)!
    
33. Invalid parameter
    
34. No pmic detect.
    
35. SDM_Write error = 0x1f80 ret = 0x1
    
36. SecureBootEn = 0, SecureBootLock = 0
    
37. 
    
38. #Boot ver: 0000-00-00#0.00
    
39. empty serial no.
    
40. Writing env to storage...
    
41. SDM_Write error = 0x1fc0 ret = 0x1
    
42. write_env failed at 0
    
43. failed
    
44. unknown reboot type 1
    
45. no fuel gauge found
    
46. no fuel gauge found
    
47. read logo on state from dts [0]
    
48. no fuel gauge found
    
49. 'recovery' does not seem to be a partition nor an address
    
50. Unable to boot:recovery
    
51. try to start backup
    
52. 'backup' does not seem to be a partition nor an address
    
53. Unable to boot:backup
    
54. try to start rockus

复制代码

jpchen

那需要确认该固件主要是做什么？同时你可以烧录公版固件确认是否可以正常启动