开启辅助访问

Firefly开源社区

Firefly开源社区 › 行业主板 › ROC-RK3328-CC› ROC－RK3328－CC Linux内核移植
12
发表新贴
打印 上一主题 下一主题

[技术讨论] ROC－RK3328－CC Linux内核移植

ifuxiao.net

42

积分

0

威望

0

贡献

技术小白

积分
42

ROC－RK3328－CC Linux内核移植

发表于 2020-2-23 14:10:24      浏览：7772 | 回复：14        打印      只看该作者   [复制链接] 楼主
这两天在ROC－RK3328－CC平台上做了Linux内核移植的实验，即将Firefly官方提供的Linux-SDK更换为Linux官方提供的SDK，版本为Linux 4.17.19。由于Linux44.17版已经对该平台提供了支持，所以除了对两处Makefile文件进行修改、添加了三个工具文件外，没有做其它变动，config使用默认设置。编译过程一切顺利，烧版也很成功，只是在启动的过程中出现了问题，希望大神给予指导。

下面是启动信息：

  1. DDR version 1.13 20180428                                                                                                               
  2. ID:0x805 N                                                                                                                              
  3. In                                                                                                                                      
  4. DDR4                                                                        
  5. 333MHz                                                                       
  6. Bus Width=32 Col=10 Bank=4 Bank Group=2 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  7. ddrconfig:19                                                
  8. OUT                                                         
  9. Boot1 Release Time: Sep  7 2018 15:49:55, version: 2.49     
  10. ChipType = 0x11, 207                                       
  11. mmc2:cmd19,100                                             
  12. SdmmcInit=2 0
  13. BootCapSize=2000
  14. UserCapSize=14910MB
  15. FwPartOffset=2000 , 2000
  16. SdmmcInit=0 NOT PRESENT
  17. StorageInit ok = 19266
  18. Raw SecureMode = 0
  19. SecureInit read PBA: 0x4
  20. SecureInit read PBA: 0x404
  21. SecureInit read PBA: 0x804
  22. SecureInit read PBA: 0xc04
  23. SecureInit read PBA: 0x1004
  24. SecureInit ret = 0, SecureMode = 0
  25. GPT part:  0, name:            uboot, start:0x4000, size:0x2000
  26. GPT part:  1, name:            trust, start:0x6000, size:0x2000
  27. GPT part:  2, name:             boot, start:0xa000, size:0x10000
  28. GPT part:  3, name:           backup, start:0x2a000, size:0x10000
  29. GPT part:  4, name:           rootfs, start:0x5a000, size:0x1cc4fdf
  30. find partition:uboot OK. first_lba:0x4000.
  31. find partition:trust OK. first_lba:0x6000.
  32. LoadTrust Addr:0x6000
  33. No find bl30.bin
  34. Load uboot, ReadLba = 4000
  35. Load OK, addr=0x200000, size=0xce990
  36. RunBL31 0x10000
  37. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-194-g646eecc5 #61 Wed Dec  5 06:31:51 UTC 2018 aarch64)

  39. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4

  41. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


  44. U-Boot 2017.09-g0b1f585323-dirty (Feb 20 2020 - 21:38:50 +0800)

  46. Model: Firefly ROC-RK3328-CC
  47. DRAM:  2 GiB
  48. Relocation Offset is: 7dbf5000
  49. Sysmem: init
  50. Using default environment

  52. rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
  53. Card did not respond to voltage select!
  54. mmc_init: -95, time 9
  55. switch to partitions #0, OK
  56. mmc0(part 0) is current device
  57. Bootdev: mmc 0
  58. PartType: EFI
  59. get part misc fail -1
  60. boot mode: None
  61. Load FDT from boot part
  62. DTB: rk-kernel.dtb
  63. In:    serial
  64. Out:   serial
  65. Err:   serial
  66. Model: Firefly roc-rk3328-cc
  67. rockchip_dnl_key_pressed adc_channel_single_shot fail! ret=-22
  68. CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0N/A)
  69.   apll 400000 KHz
  70.   dpll 664000 KHz
  71.   cpll 1200000 KHz
  72.   gpll 491009 KHz
  73.   npll 600000 KHz
  74.   armclk 600000 KHz
  75.   aclk_bus 150000 KHz
  76.   hclk_bus 75000 KHz
  77.   pclk_bus 75000 KHz
  78.   aclk_peri 150000 KHz
  79.   hclk_peri 75000 KHz
  80.   pclk_peri 75000 KHz
  81. Net:   
  82. Warning: ethernet@ff540000 (eth0) using random MAC address - 9e:92:8e:94:df:04
  83. eth0: ethernet@ff540000
  84. Hit key to stop autoboot('CTRL+C'):  0
  85. android_bootloader_boot_flow Could not find misc partition
  86. ANDROID: reboot reason: "(none)"
  87. Fdt Ramdisk skip relocation
  88. FDT load addr 0x10f00000 size 157 KiB
  89. Booting kernel at 0x00280000 with fdt at 0x8300000...


  92. ## Booting Android Image at 0x0027f800 ...
  93. Kernel load addr 0x00280000 size 17643 KiB
  94. ## Flattened Device Tree blob at 08300000
  95.    Booting using the fdt blob at 0x8300000
  96.    XIP Kernel Image ... OK
  97.    Using Device Tree in place at 0000000008300000, end 000000000830a8ac
  98. Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
  99. Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
  100. Total: 3832.498 ms

  102. Starting kernel ...


  105. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  106. [    0.000000] Linux version 4.17.19-g17982fadb9b5-dirty (msw@msw-Z97M-D3H) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #2 SMP PREEMPT Thu Feb 20 21:41:51 CST 2020
  107. [    0.000000] Machine model: Firefly roc-rk3328-cc
  108. [    0.000000] efi: Getting EFI parameters from FDT:
  109. [    0.000000] efi: UEFI not found.
  110. [    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  111. [    0.000000] NUMA: No NUMA configuration found
  112. [    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
  113. [    0.000000] NUMA: NODE_DATA [mem 0x7efc8680-0x7efca17f]
  114. [    0.000000] Zone ranges:
  115. [    0.000000]   DMA32    [mem 0x0000000000200000-0x000000007fffffff]
  116. [    0.000000]   Normal   empty
  117. [    0.000000] Movable zone start for each node
  118. [    0.000000] Early memory node ranges
  119. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
  120. [    0.000000]   node   0: [mem 0x000000000a200000-0x000000007fffffff]
  121. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  122. [    0.000000] psci: probing for conduit method from DT.
  123. [    0.000000] psci: PSCIv1.0 detected in firmware.
  124. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  125. [    0.000000] psci: Trusted OS migration not required
  126. [    0.000000] psci: SMC Calling Convention v1.0
  127. [    0.000000] random: get_random_bytes called from start_kernel+0xa4/0x414 with crng_init=0
  128. [    0.000000] percpu: Embedded 24 pages/cpu @        (ptrval) s57880 r8192 d32232 u98304
  129. [    0.000000] Detected VIPT I-cache on CPU0
  130. [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  131. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  132. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 507912
  133. [    0.000000] Policy zone: DMA32
  134. [    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc androidboot.slot_suffix= androidboot.serialno=1cb27b34a6de9e11
  135. [    0.000000] Memory: 1996516K/2064384K available (10236K kernel code, 1322K rwdata, 4808K rodata, 1216K init, 387K bss, 51484K reserved, 16384K cma-reserved)
  136. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  137. [    0.000000] Preemptible hierarchical RCU implementation.
  138. [    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  139. [    0.000000]  Tasks RCU enabled.
  140. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  141. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  142. [    0.000000] GIC: Using split EOI/Deactivate mode
  143. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  144. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  145. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  146. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  147. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  148. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  149. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  150. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  151. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  152. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  153. [    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  154. [    0.000981] Console: colour dummy device 80x25
  155. [    0.001799] console [tty0] enabled
  156. [    0.001918] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  157. [    0.001961] pid_max: default: 32768 minimum: 301
  158. [    0.002096] Security Framework initialized
  159. [    0.003422] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  160. [    0.004157] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  161. [    0.004240] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  162. [    0.004288] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  163. [    0.023937] ASID allocator initialised with 32768 entries
  164. [    0.031924] Hierarchical SRCU implementation.
  165. [    0.043241] EFI services will not be available.
  166. [    0.048025] smp: Bringing up secondary CPUs ...
  167. [    0.080306] Detected VIPT I-cache on CPU1
  168. [    0.080387] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  169. [    0.112397] Detected VIPT I-cache on CPU2
  170. [    0.112463] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  171. [    0.144512] Detected VIPT I-cache on CPU3
  172. [    0.144577] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  173. [    0.144706] smp: Brought up 1 node, 4 CPUs
  174. [    0.144842] SMP: Total of 4 processors activated.
  175. [    0.144865] CPU features: detected: 32-bit EL0 Support
  176. [    0.150221] CPU: All CPU(s) started at EL2
  177. [    0.150269] alternatives: patching kernel code
  178. [    0.151512] devtmpfs: initialized
  179. [    0.161139] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  180. [    0.161254] futex hash table entries: 1024 (order: 5, 131072 bytes)
  181. [    0.162283] pinctrl core: initialized pinctrl subsystem
  182. [    0.165449] DMI not present or invalid.
  183. [    0.166109] NET: Registered protocol family 16
  184. [    0.166738] audit: initializing netlink subsys (disabled)
  185. [    0.166979] audit: type=2000 audit(0.164:1): state=initialized audit_enabled=0 res=1
  186. [    0.177050] cpuidle: using governor menu
  187. [    0.177689] vdso: 2 pages (1 code @         (ptrval), 1 data @         (ptrval))
  188. [    0.177750] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  189. [    0.179451] DMA: preallocated 256 KiB pool for atomic allocations
  190. [    0.181808] Serial: AMBA PL011 UART driver
  191. [    0.226498] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  192. [    0.227217] cryptd: max_cpu_qlen set to 1000
  193. [    0.228329] ACPI: Interpreter disabled.
  194. [    0.231068] vcc_sys: supplied by dc_12v
  195. [    0.231781] vcc_host1_5v: supplied by vcc_sys
  196. [    0.232853] vgaarb: loaded
  197. [    0.233400] SCSI subsystem initialized
  198. [    0.234638] usbcore: registered new interface driver usbfs
  199. [    0.234770] usbcore: registered new interface driver hub
  200. [    0.234950] usbcore: registered new device driver usb
  201. [    0.236379] pps_core: LinuxPPS API ver. 1 registered
  202. [    0.236428] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  203. [    0.236495] PTP clock support registered
  204. [    0.236807] EDAC MC: Ver: 3.0.0
  205. [    0.238904] Advanced Linux Sound Architecture Driver Initialized.
  206. [    0.240326] clocksource: Switched to clocksource arch_sys_counter
  207. [    0.240639] VFS: Disk quotas dquot_6.6.0
  208. [    0.240744] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  209. [    0.241009] pnp: PnP ACPI: disabled
  210. [    0.255268] NET: Registered protocol family 2
  211. [    0.256143] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  212. [    0.256274] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  213. [    0.256639] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  214. [    0.257095] TCP: Hash tables configured (established 16384 bind 16384)
  215. [    0.257363] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  216. [    0.257478] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  217. [    0.257802] NET: Registered protocol family 1
  218. [    0.258456] RPC: Registered named UNIX socket transport module.
  219. [    0.258492] RPC: Registered udp transport module.
  220. [    0.258512] RPC: Registered tcp transport module.
  221. [    0.258531] RPC: Registered tcp NFSv4.1 backchannel transport module.
  222. [    0.259837] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  223. [    0.260211] kvm [1]: 8-bit VMID
  224. [    0.261802] kvm [1]: vgic interrupt IRQ1
  225. [    0.261988] kvm [1]: Hyp mode initialized successfully
  226. [    0.267672] Initialise system trusted keyrings
  227. [    0.267942] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  228. [    0.280283] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  229. [    0.281775] NFS: Registering the id_resolver key type
  230. [    0.281853] Key type id_resolver registered
  231. [    0.281874] Key type id_legacy registered
  232. [    0.281908] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  233. [    0.282221] 9p: Installing v9fs 9p2000 file system support
  234. [    0.282461] pstore: using deflate compression
  235. [    0.286786] Key type asymmetric registered
  236. [    0.286830] Asymmetric key parser 'x509' registered
  237. [    0.287202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  238. [    0.287256] io scheduler noop registered
  239. [    0.287276] io scheduler deadline registered
  240. [    0.287690] io scheduler cfq registered (default)
  241. [    0.287734] io scheduler mq-deadline registered
  242. [    0.287755] io scheduler kyber registered
  243. [    0.301739] EINJ: ACPI disabled.
  244. [    0.309296] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
  245. [    0.309352] dma-pl330 ff1f0000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  246. [    0.320257] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  247. [    0.324484] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A
  248. [    0.394780] console [ttyS2] enabled
  249. [    0.396965] SuperH (H)SCI(F) driver initialized
  250. [    0.398012] msm_serial: driver initialized
  251. [    0.412526] loop: module loaded
  252. [    0.419754] libphy: Fixed MDIO Bus: probed
  253. [    0.420997] tun: Universal TUN/TAP device driver, 1.6
  254. [    0.423085] thunder_xcv, ver 1.0
  255. [    0.423492] thunder_bgx, ver 1.0
  256. [    0.423868] nicpf, ver 1.0
  257. [    0.424868] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  258. [    0.425422] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  259. [    0.426051] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  260. [    0.426685] igb: Copyright (c) 2007-2014 Intel Corporation.
  261. [    0.427275] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  262. [    0.427989] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  263. [    0.429242] sky2: driver version 1.30
  264. [    0.430903] VFIO - User Level meta-driver version: 0.3
  265. [    0.432950] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
  266. [    0.433812] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
  267. [    0.568424] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  268. [    0.570550] dwc2 ff580000.usb: DWC OTG Controller
  269. [    0.571042] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
  270. [    0.571738] dwc2 ff580000.usb: irq 26, io mem 0xff580000
  271. [    0.573306] hub 1-0:1.0: USB hub found
  272. [    0.573719] hub 1-0:1.0: 1 port detected
  273. [    0.575825] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  274. [    0.576485] ehci-pci: EHCI PCI platform driver
  275. [    0.576993] ehci-platform: EHCI generic platform driver
  276. [    0.579977] ehci-platform ff5c0000.usb: EHCI Host Controller
  277. [    0.580569] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
  278. [    0.581764] ehci-platform ff5c0000.usb: irq 27, io mem 0xff5c0000
  279. [    0.596349] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
  280. [    0.597926] hub 2-0:1.0: USB hub found
  281. [    0.598348] hub 2-0:1.0: 1 port detected
  282. [    0.599360] ehci-orion: EHCI orion driver
  283. [    0.600014] ehci-exynos: EHCI EXYNOS driver
  284. [    0.600697] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  285. [    0.601309] ohci-pci: OHCI PCI platform driver
  286. [    0.601831] ohci-platform: OHCI generic platform driver
  287. [    0.602698] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
  288. [    0.603342] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
  289. [    0.604524] ohci-platform ff5d0000.usb: irq 28, io mem 0xff5d0000
  290. [    0.669476] hub 3-0:1.0: USB hub found
  291. [    0.669896] hub 3-0:1.0: 1 port detected
  292. [    0.670899] ohci-exynos: OHCI EXYNOS driver
  293. [    0.672515] usbcore: registered new interface driver usb-storage
  294. [    0.678400] i2c /dev entries driver
  295. [    0.682350] rk808 1-0018: chip id: 0x8050
  296. [    0.691251] rk808-regulator rk808-regulator: there is no dvs0 gpio
  297. [    0.691862] rk808-regulator rk808-regulator: there is no dvs1 gpio
  298. [    0.692544] DCDC_REG1: supplied by vcc_sys
  299. [    0.695650] DCDC_REG2: supplied by vcc_sys
  300. [    0.697695] DCDC_REG3: supplied by vcc_sys
  301. [    0.698431] DCDC_REG4: supplied by vcc_sys
  302. [    0.700162] LDO_REG1: supplied by vcc_io
  303. [    0.704152] LDO_REG2: supplied by vcc_io
  304. [    0.708133] LDO_REG3: supplied by vcc_io
  305. [    0.714023] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at         (ptrval)
  306. [    0.724063] sdhci: Secure Digital Host Controller Interface driver
  307. [    0.724672] sdhci: Copyright(c) Pierre Ossman
  308. [    0.725587] Synopsys Designware Multimedia Card Interface Driver
  309. [    0.727330] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  310. [    0.728255] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  311. [    0.728894] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  312. [    0.729481] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
  313. [    0.730389] vcc_sd: supplied by vcc_io
  314. [    0.743712] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  315. [    0.758104] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
  316. [    0.758962] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
  317. [    0.759572] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
  318. [    0.760149] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
  319. [    0.761134] mmc_host mmc1: card is non-removable.
  320. [    0.772451] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  321. [    0.786685] sdhci-pltfm: SDHCI platform and OF driver helper
  322. [    0.788909] ledtrig-cpu: registered to indicate activity on CPUs
  323. [    0.790940] usbcore: registered new interface driver usbhid
  324. [    0.791546] usbhid: USB HID core driver
  325. [    0.795877] NET: Registered protocol family 17
  326. [    0.796440] 9pnet: Installing 9P2000 support
  327. [    0.796951] Key type dns_resolver registered
  328. [    0.798201] registered taskstats version 1
  329. [    0.798615] Loading compiled-in X.509 certificates
  330. [    0.810842] hctosys: unable to open rtc device (rtc0)
  331. [    0.812778] vcc_sd: disabling
  332. [    0.813080] ALSA device list:
  333. [    0.813344]   No soundcards found.
  334. [    0.814024] ttyS2 - failed to request DMA
  335. [    0.814646] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
  336. [    0.815312] Please append a correct "root=" boot option; here are the available partitions:
  337. [    0.816058] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  338. [    0.816795] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.17.19-g17982fadb9b5-dirty #2
  339. [    0.817477] Hardware name: Firefly roc-rk3328-cc (DT)
  340. [    0.817928] Call trace:
  341. [    0.818165]  dump_backtrace+0x0/0x198
  342. [    0.818494]  show_stack+0x14/0x20
  343. [    0.818793]  dump_stack+0x98/0xbc
  344. [    0.819096]  panic+0x12c/0x29c
  345. [    0.819375]  mount_block_root+0x188/0x274
  346. [    0.819732]  mount_root+0x144/0x178
  347. [    0.820046]  prepare_namespace+0x138/0x180
  348. [    0.820413]  kernel_init_freeable+0x208/0x22c
  349. [    0.820805]  kernel_init+0x10/0x108
  350. [    0.821118]  ret_from_fork+0x10/0x18
  351. [    0.821445] SMP: stopping secondary CPUs
  352. [    0.821798] Kernel Offset: disabled
  353. [    0.822112] CPU features: 0x20802004
  354. [    0.822432] Memory Limit: none
  355. [    0.822714] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
复制代码
分享到：QQ空间新浪微博腾讯微博人人网微信
回复

使用道具 举报

Lazyfan

428

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
428
发表于 2020-2-24 14:55:51        只看该作者  沙发
看你这个打印信息，貌似是没有加载到这个根文件系统。
你用的dts文件是自己的还是官方的？
官方的dts文件是在chosen节点，有包含root的挂载地址这样。
回复

使用道具 举报

ifuxiao.net

42

积分

0

威望

0

贡献

技术小白

积分
42
发表于 2020-2-24 22:46:11        只看该作者  板凳
Lazyfan 发表于 2020-2-24 14:55
看你这个打印信息，貌似是没有加载到这个根文件系统。
你用的dts文件是自己的还是官方的？
官方的dts文件 ...

是的，总是找不到分区，不过今天把它解决了，就是给内核添加启动参数，指明root分区。
不过又出现了新的问题。
  1. 添加启动参数之后运行结果
  2. chosen {
  3.         bootargs = "root=/dev/mmcblk0p5 rw rootfstype=ext4 rootwait systemd.gpt_auto=0";
  4.         stdout-path = "serial2:1500000n8";
  5. };


  8. DDR version 1.13 20180428
  9. ID:0x805 N
  10. In
  11. DDR4
  12. 333MHz
  13. Bus Width=32 Col=10 Bank=4 Bank Group=2 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  14. ddrconfig:19
  15. OUT
  16. Boot1 Release Time: Sep  7 2018 15:49:55, version: 2.49
  17. ChipType = 0x11, 207
  18. mmc2:cmd19,100
  19. SdmmcInit=2 0
  20. BootCapSize=2000
  21. UserCapSize=14910MB
  22. FwPartOffset=2000 , 2000
  23. SdmmcInit=0 NOT PRESENT
  24. StorageInit ok = 19195
  25. Raw SecureMode = 0
  26. SecureInit read PBA: 0x4
  27. SecureInit read PBA: 0x404
  28. SecureInit read PBA: 0x804
  29. SecureInit read PBA: 0xc04
  30. SecureInit read PBA: 0x1004
  31. SecureInit ret = 0, SecureMode = 0
  32. GPT part:  0, name:            uboot, start:0x4000, size:0x2000
  33. GPT part:  1, name:            trust, start:0x6000, size:0x2000
  34. GPT part:  2, name:             boot, start:0xa000, size:0x10000
  35. GPT part:  3, name:           backup, start:0x2a000, size:0x10000
  36. GPT part:  4, name:           rootfs, start:0x5a000, size:0x1cc4fdf
  37. find partition:uboot OK. first_lba:0x4000.
  38. find partition:trust OK. first_lba:0x6000.
  39. LoadTrust Addr:0x6000
  40. No find bl30.bin
  41. Load uboot, ReadLba = 4000
  42. Load OK, addr=0x200000, size=0xce990
  43. RunBL31 0x10000
  44. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-194-g646eecc5 #61 Wed Dec  5 06:31:51 UTC 20)

  46. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4

  48. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


  51. U-Boot 2017.09-g0b1f585323-dirty (Feb 24 2020 - 18:54:01 +0800)

  53. Model: Firefly ROC-RK3328-CC
  54. DRAM:  2 GiB
  55. Relocation Offset is: 7dbf5000
  56. Sysmem: init
  57. Using default environment

  59. rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
  60. Card did not respond to voltage select!
  61. mmc_init: -95, time 9
  62. switch to partitions #0, OK
  63. mmc0(part 0) is current device
  64. Bootdev: mmc 0
  65. PartType: EFI
  66. get part misc fail -1
  67. boot mode: None
  68. Load FDT from boot part
  69. DTB: rk-kernel.dtb
  70. In:    serial
  71. Out:   serial
  72. Err:   serial
  73. Model: Firefly roc-rk3328-cc
  74. rockchip_dnl_key_pressed adc_channel_single_shot fail! ret=-22
  75. CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0N/A)
  76.   apll 400000 KHz
  77.   dpll 664000 KHz
  78.   cpll 1200000 KHz
  79.   gpll 491009 KHz
  80.   npll 600000 KHz
  81.   armclk 600000 KHz
  82.   aclk_bus 150000 KHz
  83.   hclk_bus 75000 KHz
  84.   pclk_bus 75000 KHz
  85.   aclk_peri 150000 KHz
  86.   hclk_peri 75000 KHz
  87.   pclk_peri 75000 KHz
  88. Net:   
  89. Warning: ethernet@ff540000 (eth0) using random MAC address - be:93:4b:db:0e:d4
  90. eth0: ethernet@ff540000
  91. Hit key to stop autoboot('CTRL+C'):  0
  92. android_bootloader_boot_flow Could not find misc partition
  93. ANDROID: reboot reason: "(none)"
  94. Fdt Ramdisk skip relocation
  95. FDT load addr 0x10f00000 size 34 KiB
  96. Booting kernel at 0x00280000 with fdt at 0x8300000...


  99. ## Booting Android Image at 0x0027f800 ...
  100. Kernel load addr 0x00280000 size 16257 KiB
  101. ## Flattened Device Tree blob at 08300000
  102.    Booting using the fdt blob at 0x8300000
  103.    XIP Kernel Image ... OK
  104.    Using Device Tree in place at 0000000008300000, end 000000000830b25a
  105. Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
  106. Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
  107. Total: 3800.934 ms

  109. Starting kernel ...


  112. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  113. [    0.000000] Linux version 4.20.0 (msw@msw-Z97M-D3H) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))0
  114. [    0.000000] Machine model: Firefly roc-rk3328-cc
  115. [    0.000000] efi: Getting EFI parameters from FDT:
  116. [    0.000000] efi: UEFI not found.
  117. [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
  118. [    0.000000] NUMA: No NUMA configuration found
  119. [    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  120. [    0.000000] NUMA: NODE_DATA [mem 0x7dfc7840-0x7dfc8fff]
  121. [    0.000000] Zone ranges:
  122. [    0.000000]   DMA32    [mem 0x0000000000200000-0x000000007fffffff]
  123. [    0.000000]   Normal   empty
  124. [    0.000000] Movable zone start for each node
  125. [    0.000000] Early memory node ranges
  126. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
  127. [    0.000000]   node   0: [mem 0x000000000a200000-0x000000007fffffff]
  128. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  129. [    0.000000] psci: probing for conduit method from DT.
  130. [    0.000000] psci: PSCIv1.0 detected in firmware.
  131. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  132. [    0.000000] psci: Trusted OS migration not required
  133. [    0.000000] psci: SMC Calling Convention v1.0
  134. [    0.000000] random: get_random_bytes called from start_kernel+0xa4/0x414 with crng_init=0
  135. [    0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55384 r8192 d30632 u94208
  136. [    0.000000] Detected VIPT I-cache on CPU0
  137. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  138. [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  139. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 507912
  140. [    0.000000] Policy zone: DMA32
  141. [    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc androidboot.slot_suffix= android4
  142. [    0.000000] Memory: 1981312K/2064384K available (10876K kernel code, 704K rwdata, 3572K rodata, 1024K ini)
  143. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  144. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  145. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  146. [    0.000000]  Tasks RCU enabled.
  147. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  148. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  149. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  150. [    0.000000] GIC: Using split EOI/Deactivate mode
  151. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  152. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  153. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  154. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  155. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  156. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  157. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  158. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  159. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  160. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 4s
  161. [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  162. [    0.000959] Console: colour dummy device 80x25
  163. [    0.001821] printk: console [tty0] enabled
  164. [    0.001965] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lp)
  165. [    0.002007] pid_max: default: 32768 minimum: 301
  166. [    0.002155] LSM: Security Framework initializing
  167. [    0.003543] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  168. [    0.004298] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  169. [    0.004381] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  170. [    0.004432] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  171. [    0.027928] ASID allocator initialised with 32768 entries
  172. [    0.035910] rcu: Hierarchical SRCU implementation.
  173. [    0.045586] EFI services will not be available.
  174. [    0.052002] smp: Bringing up secondary CPUs ...
  175. [    0.084257] Detected VIPT I-cache on CPU1
  176. [    0.084339] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  177. [    0.116346] Detected VIPT I-cache on CPU2
  178. [    0.116417] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  179. [    0.148451] Detected VIPT I-cache on CPU3
  180. [    0.148519] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  181. [    0.148641] smp: Brought up 1 node, 4 CPUs
  182. [    0.148782] SMP: Total of 4 processors activated.
  183. [    0.148806] CPU features: detected: 32-bit EL0 Support
  184. [    0.148829] CPU features: detected: CRC32 instructions
  185. [    0.152452] CPU: All CPU(s) started at EL2
  186. [    0.152498] alternatives: patching kernel code
  187. [    0.154088] devtmpfs: initialized
  188. [    0.164679] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 s
  189. [    0.164774] futex hash table entries: 1024 (order: 4, 65536 bytes)
  190. [    0.166689] xor: measuring software checksum speed
  191. [    0.204578]    8regs     :  1152.000 MB/sec
  192. [    0.244637]    8regs_prefetch:  1026.000 MB/sec
  193. [    0.284705]    32regs    :  1415.000 MB/sec
  194. [    0.324766]    32regs_prefetch:  1191.000 MB/sec
  195. [    0.324789] xor: using function: 32regs (1415.000 MB/sec)
  196. [    0.324825] pinctrl core: initialized pinctrl subsystem
  197. [    0.326831] DMI not present or invalid.
  198. [    0.327404] NET: Registered protocol family 16
  199. [    0.328155] audit: initializing netlink subsys (disabled)
  200. [    0.328413] audit: type=2000 audit(0.324:1): state=initialized audit_enabled=0 res=1
  201. [    0.333416] cpuidle: using governor menu
  202. [    0.334048] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  203. [    0.334107] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  204. [    0.335884] DMA: preallocated 256 KiB pool for atomic allocations
  205. [    0.337297] Serial: AMBA PL011 UART driver
  206. [    0.380885] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  207. [    0.382168] cryptd: max_cpu_qlen set to 1000
  208. [    0.450148] raid6: int64x1  gen()   206 MB/s
  209. [    0.518119] raid6: int64x1  xor()   222 MB/s
  210. [    0.586235] raid6: int64x2  gen()   328 MB/s
  211. [    0.654275] raid6: int64x2  xor()   299 MB/s
  212. [    0.722465] raid6: int64x4  gen()   493 MB/s
  213. [    0.790537] raid6: int64x4  xor()   370 MB/s
  214. [    0.858727] raid6: int64x8  gen()   574 MB/s
  215. [    0.926827] raid6: int64x8  xor()   373 MB/s
  216. [    0.994914] raid6: neonx1   gen()   363 MB/s
  217. [    1.063023] raid6: neonx1   xor()   425 MB/s
  218. [    1.131094] raid6: neonx2   gen()   581 MB/s
  219. [    1.199200] raid6: neonx2   xor()   602 MB/s
  220. [    1.267282] raid6: neonx4   gen()   752 MB/s
  221. [    1.335384] raid6: neonx4   xor()   720 MB/s
  222. [    1.403537] raid6: neonx8   gen()   798 MB/s
  223. [    1.471623] raid6: neonx8   xor()   755 MB/s
  224. [    1.471643] raid6: using algorithm neonx8 gen() 798 MB/s
  225. [    1.471666] raid6: .... xor() 755 MB/s, rmw enabled
  226. [    1.471687] raid6: using neon recovery algorithm
  227. [    1.472409] ACPI: Interpreter disabled.
  228. [    1.473640] sdmmc-regulator GPIO handle specifies active low - ignored
  229. [    1.474833] vcc_sys: supplied by dc_12v
  230. [    1.475629] vcc_host1_5v: supplied by vcc_sys
  231. [    1.477137] vgaarb: loaded
  232. [    1.477681] SCSI subsystem initialized
  233. [    1.478669] usbcore: registered new interface driver usbfs
  234. [    1.478812] usbcore: registered new interface driver hub
  235. [    1.479067] usbcore: registered new device driver usb
  236. [    1.479838] pps_core: LinuxPPS API ver. 1 registered
  237. [    1.479884] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  238. [    1.479951] PTP clock support registered
  239. [    1.480256] EDAC MC: Ver: 3.0.0
  240. [    1.481648] Advanced Linux Sound Architecture Driver Initialized.
  241. [    1.483276] clocksource: Switched to clocksource arch_sys_counter
  242. [    1.483853] pnp: PnP ACPI: disabled
  243. [    1.496346] NET: Registered protocol family 2
  244. [    1.497282] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  245. [    1.497406] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  246. [    1.497688] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  247. [    1.498089] TCP: Hash tables configured (established 16384 bind 16384)
  248. [    1.498338] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  249. [    1.498458] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  250. [    1.498769] NET: Registered protocol family 1
  251. [    1.499533] RPC: Registered named UNIX socket transport module.
  252. [    1.499574] RPC: Registered udp transport module.
  253. [    1.499593] RPC: Registered tcp transport module.
  254. [    1.499613] RPC: Registered tcp NFSv4.1 backchannel transport module.
  255. [    1.501012] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  256. [    1.501423] kvm [1]: 8-bit VMID
  257. [    1.501456] kvm [1]: IPA Size Limit: 40bits
  258. [    1.502369] kvm [1]: vgic interrupt IRQ1
  259. [    1.502544] kvm [1]: Hyp mode initialized successfully
  260. [    1.513061] Initialise system trusted keyrings
  261. [    1.513355] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  262. [    1.526095] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  263. [    1.527741] NFS: Registering the id_resolver key type
  264. [    1.527815] Key type id_resolver registered
  265. [    1.527835] Key type id_legacy registered
  266. [    1.527866] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  267. [    1.528197] SGI XFS with security attributes, no debug enabled
  268. [    1.530913] 9p: Installing v9fs 9p2000 file system support
  269. [    1.539673] Key type asymmetric registered
  270. [    1.539719] Asymmetric key parser 'x509' registered
  271. [    1.539829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  272. [    1.539862] io scheduler noop registered
  273. [    1.539883] io scheduler deadline registered
  274. [    1.540188] io scheduler cfq registered (default)
  275. [    1.540225] io scheduler mq-deadline registered
  276. [    1.540247] io scheduler kyber registered
  277. [    1.546751] EINJ: ACPI disabled.
  278. [    1.551876] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
  279. [    1.551943] dma-pl330 ff1f0000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  280. [    1.559026] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  281. [    1.562553] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A
  282. [    1.646425] printk: console [ttyS2] enabled
  283. [    1.662673] loop: module loaded
  284. [    1.667418] libphy: Fixed MDIO Bus: probed
  285. [    1.668848] tun: Universal TUN/TAP device driver, 1.6
  286. [    1.670477] thunder_xcv, ver 1.0
  287. [    1.670886] thunder_bgx, ver 1.0
  288. [    1.671353] nicpf, ver 1.0
  289. [    1.672349] hclge is initializing
  290. [    1.672688] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  291. [    1.673341] hns3: Copyright (c) 2017 Huawei Corporation.
  292. [    1.673924] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  293. [    1.674463] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  294. [    1.675067] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  295. [    1.675732] igb: Copyright (c) 2007-2014 Intel Corporation.
  296. [    1.676325] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  297. [    1.677040] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  298. [    1.677872] sky2: driver version 1.30
  299. [    1.678945] VFIO - User Level meta-driver version: 0.3
  300. [    1.680862] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
  301. [    1.681724] dwc2 ff580000.usb: Linked as a consumer to regulator.0
  302. [    1.682297] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
  303. [    1.811419] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  304. [    1.813724] dwc2 ff580000.usb: DWC OTG Controller
  305. [    1.814211] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
  306. [    1.814902] dwc2 ff580000.usb: irq 26, io mem 0xff580000
  307. [    1.816451] hub 1-0:1.0: USB hub found
  308. [    1.816868] hub 1-0:1.0: 1 port detected
  309. [    1.818984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  310. [    1.819646] ehci-pci: EHCI PCI platform driver
  311. [    1.820160] ehci-platform: EHCI generic platform driver
  312. [    1.823076] ehci-platform ff5c0000.usb: EHCI Host Controller
  313. [    1.823651] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
  314. [    1.824942] ehci-platform ff5c0000.usb: irq 27, io mem 0xff5c0000
  315. [    1.839306] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
  316. [    1.840883] hub 2-0:1.0: USB hub found
  317. [    1.841314] hub 2-0:1.0: 1 port detected
  318. [    1.842330] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  319. [    1.842949] ohci-pci: OHCI PCI platform driver
  320. [    1.843519] ohci-platform: OHCI generic platform driver
  321. [    1.844408] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
  322. [    1.845046] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
  323. [    1.846164] ohci-platform ff5d0000.usb: irq 28, io mem 0xff5d0000
  324. [    1.908394] hub 3-0:1.0: USB hub found
  325. [    1.908842] hub 3-0:1.0: 1 port detected
  326. [    1.910607] usbcore: registered new interface driver usb-storage
  327. [    1.914567] i2c /dev entries driver
  328. [    1.917660] rk808 1-0018: chip id: 0x8050
  329. [    1.926311] rk808-regulator rk808-regulator: there is no dvs0 gpio
  330. [    1.926927] rk808-regulator rk808-regulator: there is no dvs1 gpio
  331. [    1.927642] DCDC_REG1: supplied by vcc_sys
  332. [    1.930652] DCDC_REG2: supplied by vcc_sys
  333. [    1.932747] DCDC_REG3: supplied by vcc_sys
  334. [    1.933477] DCDC_REG4: supplied by vcc_sys
  335. [    1.935168] LDO_REG1: supplied by vcc_io
  336. [    1.939230] LDO_REG2: supplied by vcc_io
  337. [    1.943304] LDO_REG3: supplied by vcc_io
  338. [    1.949231] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.9
  339. [    1.950621] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.11
  340. [    1.951534] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.11
  341. [    1.952365] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.9
  342. [    1.955429] cpu cpu0: Linked as a consumer to regulator.7
  343. [    1.956007] cpu cpu0: Dropping the link to regulator.7
  344. [    1.956697] cpu cpu0: Linked as a consumer to regulator.7
  345. [    1.959525] sdhci: Secure Digital Host Controller Interface driver
  346. [    1.960102] sdhci: Copyright(c) Pierre Ossman
  347. [    1.960761] Synopsys Designware Multimedia Card Interface Driver
  348. [    1.962421] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  349. [    1.963451] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  350. [    1.964074] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  351. [    1.964660] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fio
  352. [    1.965579] vcc_sd: supplied by vcc_io
  353. [    1.966040] dwmmc_rockchip ff500000.dwmmc: Linked as a consumer to regulator.2
  354. [    1.966773] dwmmc_rockchip ff500000.dwmmc: Dropping the link to regulator.2
  355. [    1.968387] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
  356. [    1.969228] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
  357. [    1.969838] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
  358. [    1.970397] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fio
  359. [    1.971433] mmc_host mmc0: card is non-removable.
  360. [    1.983363] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  361. [    1.995562] sdhci-pltfm: SDHCI platform and OF driver helper
  362. [    1.996878] ledtrig-cpu: registered to indicate activity on CPUs
  363. [    1.998933] usbcore: registered new interface driver usbhid
  364. [    1.999540] usbhid: USB HID core driver
  365. [    2.002658] NET: Registered protocol family 17
  366. [    2.003386] 9pnet: Installing 9P2000 support
  367. [    2.003878] Key type dns_resolver registered
  368. [    2.005099] registered taskstats version 1
  369. [    2.005513] Loading compiled-in X.509 certificates
  370. [    2.007462] Btrfs loaded, crc32c=crc32c-generic
  371. [    2.021629] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.9
  372. [    2.022946] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.11
  373. [    2.023828] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.11
  374. [    2.024611] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.9
  375. [    2.026415] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  376. [    2.027505] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  377. [    2.028151] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  378. [    2.028714] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fio
  379. [    2.029747] dwmmc_rockchip ff500000.dwmmc: Linked as a consumer to regulator.2
  380. [    2.030490] dwmmc_rockchip ff500000.dwmmc: Dropping the link to regulator.2
  381. [    2.032312] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.9
  382. [    2.033656] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.11
  383. [    2.034493] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.11
  384. [    2.035338] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.9
  385. [    2.037173] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  386. [    2.038261] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  387. [    2.038882] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  388. [    2.039452] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fio
  389. [    2.040428] dwmmc_rockchip ff500000.dwmmc: Linked as a consumer to regulator.2
  390. [    2.041162] dwmmc_rockchip ff500000.dwmmc: Dropping the link to regulator.2
  391. [    2.042381] hctosys: unable to open rtc device (rtc0)
  392. [    2.044215] vcc_sd: disabling
  393. [    2.044551] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = )
  394. [    2.045535] ALSA device list:
  395. [    2.045813]   No soundcards found.
  396. [    2.046171] mmc0: new high speed MMC card at address 0001
  397. [    2.048305] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
  398. [    2.049796] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB
  399. [    2.051439] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB
  400. [    2.052280] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB, chardev (244:0)
  401. [    2.056281]  mmcblk0: p1 p2 p3 p4 p5
  402. [    2.060806] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.9
  403. [    2.062185] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.11
  404. [    2.063092] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.11
  405. [    2.063235] random: fast init done
  406. [    2.063948] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.9
  407. [    2.065809] EXT4-fs (mmcblk0p5): recovery complete
  408. [    2.066156] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  409. [    2.066272] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  410. [    2.067818] VFS: Mounted root (ext4 filesystem) on device 179:5.
  411. [    2.067861] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  412. [    2.068970] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  413. [    2.069546] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fio
  414. [    2.070166] devtmpfs: mounted
  415. [    2.070528] dwmmc_rockchip ff500000.dwmmc: Linked as a consumer to regulator.2
  416. [    2.071369] Freeing unused kernel memory: 1024K
  417. [    2.071896] dwmmc_rockchip ff500000.dwmmc: Dropping the link to regulator.2
  418. [    2.107313] Run /sbin/init as init process
  419. [    2.427122] systemd[1]: System time before build time, advancing clock.
  420. [    2.456245] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +)
  421. [    2.458577] systemd[1]: Code should not be reached 'Couldn't identify architecture. You need to patch sys.
  422. [    2.461734] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000005
  423. [    2.462444] CPU: 2 PID: 1 Comm: systemd Not tainted 4.20.0 #1
  424. [    2.462953] Hardware name: Firefly roc-rk3328-cc (DT)
  425. [    2.463401] Call trace:
  426. [    2.463641]  dump_backtrace+0x0/0x158
  427. [    2.463970]  show_stack+0x14/0x20
  428. [    2.464270]  dump_stack+0x8c/0xac
  429. [    2.464573]  panic+0x13c/0x2ac
  430. [    2.464851]  do_exit+0x994/0x998
  431. [    2.465143]  do_group_exit+0x34/0x98
  432. [    2.465466]  get_signal+0x1d8/0x480
  433. [    2.465782]  do_notify_resume+0x2ac/0x390
  434. [    2.466141]  work_pending+0x8/0x10
  435. [    2.466453] SMP: stopping secondary CPUs
  436. [    2.466809] Kernel Offset: disabled
  437. [    2.467122] CPU features: 0x2,20802004
  438. [    2.467455] Memory Limit: none
  439. [    2.467737] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000005 ]---
复制代码
回复

使用道具 举报

ifuxiao.net

42

积分

0

威望

0

贡献

技术小白

积分
42
发表于 2020-2-24 22:49:19        只看该作者  地板
Lazyfan 发表于 2020-2-24 14:55
看你这个打印信息，貌似是没有加载到这个根文件系统。
你用的dts文件是自己的还是官方的？
官方的dts文件 ...

dts文件是linux kernel自带的，不是Firefly提供的，少了很多，只有rk3328.dtsi和rk3328-roc-cc.dts。
回复

使用道具 举报

Lazyfan

428

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
428
发表于 2020-2-25 09:48:38        只看该作者  5#
ifuxiao.net 发表于 2020-2-24 22:49
dts文件是linux kernel自带的，不是Firefly提供的，少了很多，只有rk3328.dtsi和rk3328-roc-cc.dts。

最后一行的exitcode值应该是关键，但是我不知道这个值是代表什么意思。
你试试用官方的启动参数，看看行不行？
chosen {
          bootargs = "rockchip_jtag earlyprintk=uart8250-32bit,0xff130000 swiotlb=1 kpti=0 console=ttyFIQ0 rw root=PARTUUID=614e0000-0000 roo    tfstype=ext4 rootwait systemd.gpt_auto=0";
          stdout-path = "serial2:1500000n8";
      };
回复

使用道具 举报

ifuxiao.net

42

积分

0

威望

0

贡献

技术小白

积分
42
发表于 2020-2-25 13:26:18        只看该作者  6#
Lazyfan 发表于 2020-2-25 09:48
最后一行的exitcode值应该是关键，但是我不知道这个值是代表什么意思。
你试试用官方的启动参数，看看行 ...

今天上午已经解决了，是因为我用firefly提供的arch/arm64/Makefile 替换了系统自带的文件，它们之间有许多变量定义不一样，所以造成了系统不识别的问题。今天已经进行了多次实验，linux5.20.0、linux5.5.0均已通过。但现在新的问题又出现了，就是显示器没有显示，除了检查到有HDMI信号外，没有任何反应。

  1. # 1. 修改SDK根目录（即kernel根目录）下ARCH类型和交叉编译器位置
  2. # 2. 修改arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts，添加内核启动参数
  3.         bootargs = "root=/dev/mmcblk0p5 rw rootfstype=ext4 rootwait systemd.gpt_auto=0";
  4. # 3. 拷贝logo.bmp到SDK根目录（即kernel根目录）
  5. # 4.手动生成boot.img及resource.img
  6.         利用firefly提供的mkkrnlimg、resource_tool及mkbootimg三个工具（在firefly提供的linux-sdk/kernel/scripts目录下），手动生成boot.img和resource.img。在此之前必须先执行./build.sh kernel，完成kernel编译，否则会报找不文件的错误。
  7. # 说明
  8.         1. 这里之所以没有修改arch/arm64/Makefile，是因为加入自动生成代码后一致报错，在不修改原代码的情况下没有解决，因此改为手动生成boot.img和resource.img两人个文件。
  9.         2. 切记：arch/arm64/Makefile不要用firefly提供的linux-sdk中的相应文件替换，由于版本不一样，两人文件一些变量定义不一样，虽然可以编译通过，
  10.         但会出现无法识别系统结构类型的错误，在不清楚的情况下，只需要将自动boot生成代码加到文件尾部即可，或手动生成需要的文件，切记！切记！切记。
  11.         3. 目前已经实验了linux4.20.0和linux5.5.0，均以实现正常启动（除显示问题外）。
  12.         3. 目前还有显示器不显示的问题没有解决。


  15. DDR version 1.13 20180428
  16. ID:0x805 N
  17. In
  18. DDR4
  19. 333MHz
  20. Bus Width=32 Col=10 Bank=4 Bank Group=2 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  21. ddrconfig:19
  22. OUT
  23. Boot1 Release Time: Sep  7 2018 15:49:55, version: 2.49
  24. ChipType = 0x11, 207
  25. mmc2:cmd19,100
  26. SdmmcInit=2 0
  27. BootCapSize=2000
  28. UserCapSize=14910MB
  29. FwPartOffset=2000 , 2000
  30. SdmmcInit=0 NOT PRESENT
  31. StorageInit ok = 19179
  32. Raw SecureMode = 0
  33. SecureInit read PBA: 0x4
  34. SecureInit read PBA: 0x404
  35. SecureInit read PBA: 0x804
  36. SecureInit read PBA: 0xc04
  37. SecureInit read PBA: 0x1004
  38. SecureInit ret = 0, SecureMode = 0
  39. GPT part:  0, name:            uboot, start:0x4000, size:0x2000
  40. GPT part:  1, name:            trust, start:0x6000, size:0x2000
  41. GPT part:  2, name:             boot, start:0xa000, size:0x10000
  42. GPT part:  3, name:           backup, start:0x2a000, size:0x10000
  43. GPT part:  4, name:           rootfs, start:0x5a000, size:0x1cc4fdf
  44. find partition:uboot OK. first_lba:0x4000.
  45. find partition:trust OK. first_lba:0x6000.
  46. LoadTrust Addr:0x6000
  47. No find bl30.bin
  48. Load uboot, ReadLba = 4000
  49. Load OK, addr=0x200000, size=0xce990
  50. RunBL31 0x10000
  51. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-194-g646eecc5 #61 Wed Dec  5 06:31:51 UTC 2018 aa)

  53. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4

  55. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


  58. U-Boot 2017.09-g0b1f585323-dirty (Feb 25 2020 - 12:02:54 +0800)

  60. Model: Firefly ROC-RK3328-CC
  61. DRAM:  2 GiB
  62. Relocation Offset is: 7dbf5000
  63. Sysmem: init
  64. Using default environment

  66. rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
  67. Card did not respond to voltage select!
  68. mmc_init: -95, time 9
  69. GPT: my_lba incorrect: 4E494843414D0A31 != 1d1efff
  70. GPT: my_lba incorrect: 4E494843414D0A31 != 1d1efff
  71. Repair the backup gpt table OK!
  72. Repair the backup gpt table OK!
  73. switch to partitions #0, OK
  74. mmc0(part 0) is current device
  75. Bootdev: mmc 0
  76. PartType: EFI
  77. get part misc fail -1
  78. boot mode: None
  79. Load FDT from boot part
  80. DTB: rk-kernel.dtb
  81. In:    serial
  82. Out:   serial
  83. Err:   serial
  84. Model: Firefly roc-rk3328-cc
  85. rockchip_dnl_key_pressed adc_channel_single_shot fail! ret=-22
  86. CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0N/A)
  87.   apll 400000 KHz
  88.   dpll 664000 KHz
  89.   cpll 1200000 KHz
  90.   gpll 491009 KHz
  91.   npll 600000 KHz
  92.   armclk 600000 KHz
  93.   aclk_bus 150000 KHz
  94.   hclk_bus 75000 KHz
  95.   pclk_bus 75000 KHz
  96.   aclk_peri 150000 KHz
  97.   hclk_peri 75000 KHz
  98.   pclk_peri 75000 KHz
  99. Net:   
  100. Warning: ethernet@ff540000 (eth0) using random MAC address - 0e:1a:d8:2a:e3:fd
  101. eth0: ethernet@ff540000
  102. Hit key to stop autoboot('CTRL+C'):  0
  103. android_bootloader_boot_flow Could not find misc partition
  104. ANDROID: reboot reason: "(none)"
  105. Fdt Ramdisk skip relocation
  106. FDT load addr 0x10f00000 size 160 KiB
  107. Booting kernel at 0x00280000 with fdt at 0x8300000...


  110. ## Booting Android Image at 0x0027f800 ...
  111. Kernel load addr 0x00280000 size 18695 KiB
  112. ## Flattened Device Tree blob at 08300000
  113.    Booting using the fdt blob at 0x8300000
  114.    XIP Kernel Image ... OK
  115.    Using Device Tree in place at 0000000008300000, end 000000000830b25e
  116. Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
  117. Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
  118. Total: 3901.546 ms

  120. Starting kernel ...


  123. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  124. [    0.000000] Linux version 4.20.0 (msw@msw-Z97M-D3H) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #1 S0
  125. [    0.000000] Machine model: Firefly roc-rk3328-cc
  126. [    0.000000] efi: Getting EFI parameters from FDT:
  127. [    0.000000] efi: UEFI not found.
  128. [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
  129. [    0.000000] NUMA: No NUMA configuration found
  130. [    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  131. [    0.000000] NUMA: NODE_DATA [mem 0x7dfc7840-0x7dfc8fff]
  132. [    0.000000] Zone ranges:
  133. [    0.000000]   DMA32    [mem 0x0000000000200000-0x000000007fffffff]
  134. [    0.000000]   Normal   empty
  135. [    0.000000] Movable zone start for each node
  136. [    0.000000] Early memory node ranges
  137. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
  138. [    0.000000]   node   0: [mem 0x000000000a200000-0x000000007fffffff]
  139. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  140. [    0.000000] psci: probing for conduit method from DT.
  141. [    0.000000] psci: PSCIv1.0 detected in firmware.
  142. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  143. [    0.000000] psci: Trusted OS migration not required
  144. [    0.000000] psci: SMC Calling Convention v1.0
  145. [    0.000000] random: get_random_bytes called from start_kernel+0xa4/0x414 with crng_init=0
  146. [    0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55704 r8192 d30312 u94208
  147. [    0.000000] Detected VIPT I-cache on CPU0
  148. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  149. [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  150. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 507912
  151. [    0.000000] Policy zone: DMA32
  152. [    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc androidboot.slot_suffix= androidboot.0
  153. [    0.000000] Memory: 1978876K/2064384K available (10748K kernel code, 1414K rwdata, 5100K rodata, 1344K init, 3)
  154. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  155. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  156. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  157. [    0.000000]  Tasks RCU enabled.
  158. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  159. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  160. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  161. [    0.000000] GIC: Using split EOI/Deactivate mode
  162. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  163. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  164. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  165. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  166. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  167. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  168. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  169. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  170. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  171. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795s
  172. [    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  173. [    0.001195] Console: colour dummy device 80x25
  174. [    0.002036] printk: console [tty0] enabled
  175. [    0.002198] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=960)
  176. [    0.002239] pid_max: default: 32768 minimum: 301
  177. [    0.002384] LSM: Security Framework initializing
  178. [    0.003821] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  179. [    0.004528] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  180. [    0.004612] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  181. [    0.004659] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  182. [    0.027921] ASID allocator initialised with 32768 entries
  183. [    0.035906] rcu: Hierarchical SRCU implementation.
  184. [    0.047426] EFI services will not be available.
  185. [    0.052004] smp: Bringing up secondary CPUs ...
  186. [    0.084263] Detected VIPT I-cache on CPU1
  187. [    0.084342] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  188. [    0.116350] Detected VIPT I-cache on CPU2
  189. [    0.116417] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  190. [    0.148445] Detected VIPT I-cache on CPU3
  191. [    0.148507] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  192. [    0.148630] smp: Brought up 1 node, 4 CPUs
  193. [    0.148760] SMP: Total of 4 processors activated.
  194. [    0.148784] CPU features: detected: 32-bit EL0 Support
  195. [    0.148806] CPU features: detected: CRC32 instructions
  196. [    0.152466] CPU: All CPU(s) started at EL2
  197. [    0.152517] alternatives: patching kernel code
  198. [    0.154076] devtmpfs: initialized
  199. [    0.164582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  200. [    0.164706] futex hash table entries: 1024 (order: 4, 65536 bytes)
  201. [    0.166606] pinctrl core: initialized pinctrl subsystem
  202. [    0.169806] DMI not present or invalid.
  203. [    0.170587] NET: Registered protocol family 16
  204. [    0.171443] audit: initializing netlink subsys (disabled)
  205. [    0.171729] audit: type=2000 audit(0.168:1): state=initialized audit_enabled=0 res=1
  206. [    0.174672] cpuidle: using governor menu
  207. [    0.175499] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  208. [    0.175555] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  209. [    0.178019] DMA: preallocated 256 KiB pool for atomic allocations
  210. [    0.180434] Serial: AMBA PL011 UART driver
  211. [    0.229589] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  212. [    0.230292] cryptd: max_cpu_qlen set to 1000
  213. [    0.231663] ACPI: Interpreter disabled.
  214. [    0.233390] sdmmc-regulator GPIO handle specifies active low - ignored
  215. [    0.234611] vcc_sys: supplied by dc_12v
  216. [    0.235313] vcc_host1_5v: supplied by vcc_sys
  217. [    0.237006] vgaarb: loaded
  218. [    0.237812] SCSI subsystem initialized
  219. [    0.238832] usbcore: registered new interface driver usbfs
  220. [    0.238979] usbcore: registered new interface driver hub
  221. [    0.239165] usbcore: registered new device driver usb
  222. [    0.240614] pps_core: LinuxPPS API ver. 1 registered
  223. [    0.240659] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  224. [    0.240758] PTP clock support registered
  225. [    0.241068] EDAC MC: Ver: 3.0.0
  226. [    0.243181] Advanced Linux Sound Architecture Driver Initialized.
  227. [    0.244648] clocksource: Switched to clocksource arch_sys_counter
  228. [    0.244936] VFS: Disk quotas dquot_6.6.0
  229. [    0.245043] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  230. [    0.245437] pnp: PnP ACPI: disabled
  231. [    0.260886] NET: Registered protocol family 2
  232. [    0.261885] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  233. [    0.262012] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  234. [    0.262310] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  235. [    0.262713] TCP: Hash tables configured (established 16384 bind 16384)
  236. [    0.262963] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  237. [    0.263098] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  238. [    0.263405] NET: Registered protocol family 1
  239. [    0.264059] RPC: Registered named UNIX socket transport module.
  240. [    0.264090] RPC: Registered udp transport module.
  241. [    0.264110] RPC: Registered tcp transport module.
  242. [    0.264128] RPC: Registered tcp NFSv4.1 backchannel transport module.
  243. [    0.265983] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  244. [    0.266367] kvm [1]: 8-bit VMID
  245. [    0.266398] kvm [1]: IPA Size Limit: 40bits
  246. [    0.267510] kvm [1]: vgic interrupt IRQ1
  247. [    0.267686] kvm [1]: Hyp mode initialized successfully
  248. [    0.277760] Initialise system trusted keyrings
  249. [    0.278039] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  250. [    0.291002] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  251. [    0.292395] NFS: Registering the id_resolver key type
  252. [    0.292470] Key type id_resolver registered
  253. [    0.292491] Key type id_legacy registered
  254. [    0.292522] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  255. [    0.292928] 9p: Installing v9fs 9p2000 file system support
  256. [    0.302918] Key type asymmetric registered
  257. [    0.302961] Asymmetric key parser 'x509' registered
  258. [    0.303070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  259. [    0.303105] io scheduler noop registered
  260. [    0.303125] io scheduler deadline registered
  261. [    0.303433] io scheduler cfq registered (default)
  262. [    0.303465] io scheduler mq-deadline registered
  263. [    0.303486] io scheduler kyber registered
  264. [    0.319837] EINJ: ACPI disabled.
  265. [    0.328131] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
  266. [    0.328188] dma-pl330 ff1f0000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  267. [    0.340311] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  268. [    0.345043] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A
  269. [    0.419296] printk: console [ttyS2] enabled
  270. [    0.421788] SuperH (H)SCI(F) driver initialized
  271. [    0.422884] msm_serial: driver initialized
  272. [    0.438418] loop: module loaded
  273. [    0.446800] libphy: Fixed MDIO Bus: probed
  274. [    0.448228] tun: Universal TUN/TAP device driver, 1.6
  275. [    0.450400] thunder_xcv, ver 1.0
  276. [    0.450813] thunder_bgx, ver 1.0
  277. [    0.451195] nicpf, ver 1.0
  278. [    0.452298] hclge is initializing
  279. [    0.452704] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  280. [    0.453366] hns3: Copyright (c) 2017 Huawei Corporation.
  281. [    0.453953] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  282. [    0.454488] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  283. [    0.455095] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  284. [    0.455729] igb: Copyright (c) 2007-2014 Intel Corporation.
  285. [    0.456302] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  286. [    0.457051] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  287. [    0.458423] sky2: driver version 1.30
  288. [    0.460169] VFIO - User Level meta-driver version: 0.3
  289. [    0.462601] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
  290. [    0.463468] dwc2 ff580000.usb: Linked as a consumer to regulator.0
  291. [    0.464042] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
  292. [    0.592737] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  293. [    0.595191] dwc2 ff580000.usb: DWC OTG Controller
  294. [    0.595681] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
  295. [    0.596373] dwc2 ff580000.usb: irq 26, io mem 0xff580000
  296. [    0.597859] hub 1-0:1.0: USB hub found
  297. [    0.598282] hub 1-0:1.0: 1 port detected
  298. [    0.600457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  299. [    0.601126] ehci-pci: EHCI PCI platform driver
  300. [    0.601635] ehci-platform: EHCI generic platform driver
  301. [    0.604627] ehci-platform ff5c0000.usb: EHCI Host Controller
  302. [    0.605217] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
  303. [    0.606464] ehci-platform ff5c0000.usb: irq 27, io mem 0xff5c0000
  304. [    0.620677] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
  305. [    0.622273] hub 2-0:1.0: USB hub found
  306. [    0.622699] hub 2-0:1.0: 1 port detected
  307. [    0.623737] ehci-orion: EHCI orion driver
  308. [    0.624412] ehci-exynos: EHCI EXYNOS driver
  309. [    0.625087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  310. [    0.625694] ohci-pci: OHCI PCI platform driver
  311. [    0.626237] ohci-platform: OHCI generic platform driver
  312. [    0.627133] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
  313. [    0.627773] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
  314. [    0.629003] ohci-platform ff5d0000.usb: irq 28, io mem 0xff5d0000
  315. [    0.693733] hub 3-0:1.0: USB hub found
  316. [    0.694159] hub 3-0:1.0: 1 port detected
  317. [    0.695149] ohci-exynos: OHCI EXYNOS driver
  318. [    0.696811] usbcore: registered new interface driver usb-storage
  319. [    0.703238] i2c /dev entries driver
  320. [    0.707198] rk808 1-0018: chip id: 0x8050
  321. [    0.716244] rk808-regulator rk808-regulator: there is no dvs0 gpio
  322. [    0.716900] rk808-regulator rk808-regulator: there is no dvs1 gpio
  323. [    0.717542] DCDC_REG1: supplied by vcc_sys
  324. [    0.720597] DCDC_REG2: supplied by vcc_sys
  325. [    0.722709] DCDC_REG3: supplied by vcc_sys
  326. [    0.723485] DCDC_REG4: supplied by vcc_sys
  327. [    0.725326] LDO_REG1: supplied by vcc_io
  328. [    0.729317] LDO_REG2: supplied by vcc_io
  329. [    0.733362] LDO_REG3: supplied by vcc_io
  330. [    0.741620] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.9
  331. [    0.743012] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.11
  332. [    0.743891] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.11
  333. [    0.744760] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.9
  334. [    0.751218] cpu cpu0: Linked as a consumer to regulator.7
  335. [    0.751802] cpu cpu0: Dropping the link to regulator.7
  336. [    0.752528] cpu cpu0: Linked as a consumer to regulator.7
  337. [    0.755946] sdhci: Secure Digital Host Controller Interface driver
  338. [    0.756527] sdhci: Copyright(c) Pierre Ossman
  339. [    0.757705] Synopsys Designware Multimedia Card Interface Driver
  340. [    0.759637] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  341. [    0.760705] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  342. [    0.761326] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  343. [    0.761888] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
  344. [    0.762800] vcc_sd: supplied by vcc_io
  345. [    0.763259] dwmmc_rockchip ff500000.dwmmc: Linked as a consumer to regulator.2
  346. [    0.763991] dwmmc_rockchip ff500000.dwmmc: Dropping the link to regulator.2
  347. [    0.765459] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
  348. [    0.766305] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
  349. [    0.766913] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
  350. [    0.767470] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
  351. [    0.768422] mmc_host mmc0: card is non-removable.
  352. [    0.780771] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  353. [    0.795167] sdhci-pltfm: SDHCI platform and OF driver helper
  354. [    0.797799] ledtrig-cpu: registered to indicate activity on CPUs
  355. [    0.800396] usbcore: registered new interface driver usbhid
  356. [    0.800997] usbhid: USB HID core driver
  357. [    0.806425] NET: Registered protocol family 17
  358. [    0.807058] 9pnet: Installing 9P2000 support
  359. [    0.807538] Key type dns_resolver registered
  360. [    0.808861] registered taskstats version 1
  361. [    0.809249] Loading compiled-in X.509 certificates
  362. [    0.824356] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.9
  363. [    0.825708] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.11
  364. [    0.826545] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.11
  365. [    0.827328] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.9
  366. [    0.830212] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  367. [    0.831334] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  368. [    0.831960] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  369. [    0.832508] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
  370. [    0.833608] dwmmc_rockchip ff500000.dwmmc: Linked as a consumer to regulator.2
  371. [    0.834361] dwmmc_rockchip ff500000.dwmmc: Dropping the link to regulator.2
  372. [    0.837878] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.9
  373. [    0.839208] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.11
  374. [    0.839418] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  375. [    0.840064] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.11
  376. [    0.841093] mmc0: new high speed MMC card at address 0001
  377. [    0.841645] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.9
  378. [    0.844195] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
  379. [    0.845914] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB
  380. [    0.846838] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  381. [    0.847601] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB
  382. [    0.848426] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB, chardev (240:0)
  383. [    0.848455] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  384. [    0.849740] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  385. [    0.850307] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
  386. [    0.851296] dwmmc_rockchip ff500000.dwmmc: Linked as a consumer to regulator.2
  387. [    0.852039] dwmmc_rockchip ff500000.dwmmc: Dropping the link to regulator.2
  388. [    0.853414] hctosys: unable to open rtc device (rtc0)
  389. [    0.855397] vcc_sd: disabling
  390. [    0.855708] ALSA device list:
  391. [    0.855974]   No soundcards found.
  392. [    0.858636]  mmcblk0: p1 p2 p3 p4 p5
  393. [    0.864945] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.9
  394. [    0.866287] rockchip-iodomain ff100000.syscon:io-domains: Linked as a consumer to regulator.11
  395. [    0.867116] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.11
  396. [    0.867895] rockchip-iodomain ff100000.syscon:io-domains: Dropping the link to regulator.9
  397. [    0.869159] random: fast init done
  398. [    0.871502] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  399. [    0.872535] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  400. [    0.873392] VFS: Mounted root (ext4 filesystem) on device 179:5.
  401. [    0.874331] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  402. [    0.874956] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  403. [    0.875508] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
  404. [    0.875893] devtmpfs: mounted
  405. [    0.876490] dwmmc_rockchip ff500000.dwmmc: Linked as a consumer to regulator.2
  406. [    0.877547] dwmmc_rockchip ff500000.dwmmc: Dropping the link to regulator.2
  407. [    0.877570] Freeing unused kernel memory: 1344K
  408. [    0.900672] Run /sbin/init as init process
  409. [    1.219444] systemd[1]: System time before build time, advancing clock.
  410. [    1.248319] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVI)
  411. [    1.250785] systemd[1]: Detected architecture arm64.

  413. Welcome to Ubuntu 18.04.2 LTS!

  415. [    1.269449] systemd[1]: Set hostname to <firefly>.
  416. [    1.488705] systemd[1]: File /lib/systemd/system/systemd-udevd.service:34 configures an IP firewall (IPAddress.
  417. [    1.490219] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first lo)
  418. [    1.752556] random: systemd: uninitialized urandom read (16 bytes read)
  419. [    1.753459] systemd[1]: Reached target Remote File Systems.
  420. [  OK  ] Reached target Remote File Systems.
  421. [    1.764838] random: systemd: uninitialized urandom read (16 bytes read)
  422. [    1.766304] systemd[1]: Created slice User and Session Slice.
  423. [  OK  ] Created slice User and Session Slice.
  424. [    1.776905] random: systemd: uninitialized urandom read (16 bytes read)
  425. [    1.778292] systemd[1]: Created slice System Slice.
  426. [  OK  ] Created slice System Slice.
  427. [    1.789384] systemd[1]: Listening on Journal Socket (/dev/log).
  428. [  OK  ] Listening on Journal Socket (/dev/log).
  429. [    1.801190] systemd[1]: Listening on udev Kernel Socket.
  430. [  OK  ] Listening on udev Kernel Socket.
  431. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  432. [  OK  ] Listening on Journal Socket.
  433.          Mounting POSIX Message Queue File System...
  434.          Starting Set the console keyboard layout...
  435. [  OK  ] Created slice system-serial\x2dgetty.slice.
  436.          Starting Create Static Device Nodes in /dev...
  437.          Starting Remount Root and Kernel File Systems...
  438.          Mounting Huge Pages File System...
  439. [  OK  ] Reached target Swap.
  440. [  OK  ] Listening on udev Control Socket.
  441.          Starting udev Coldplug all Devices...
  442.          Mounting Kernel Debug File System...
  443. [  OK  ] Listening on Syslog Socket.
  444.          Starting Load Kernel Modules...
  445. [  OK  ] Reached target User and Group Name Lookups.
  446. [  OK  ] Listening on Journal Audit Socket.
  447.          Starting Journal Service...
  448. [  OK  ] Started Forward Password Requests to Wall Directory Watch.
  449. [  OK  ] Reached target Slices.
  450. [  OK  ] Mounted POSIX Message Queue File System.
  451. [  OK  ] Started Create Static Device Nodes in /dev.
  452. [  OK  ] Started Remount Root and Kernel File Systems.
  453. [  OK  ] Mounted Huge Pages File System.
  454. [  OK  ] Mounted Kernel Debug File System.
  455. [  OK  ] Started Load Kernel Modules.
  456.          Mounting Kernel Configuration File System...
  457.          Starting Apply Kernel Variables...
  458.          Starting Load/Save Random Seed...
  459.          Starting udev Kernel Device Manager...
  460. [  OK  ] Started Journal Service.
  461. [  OK  ] Mounted Kernel Configuration File System.
  462. [  OK  ] Started Load/Save Random Seed.
  463.          Starting Flush Journal to Persistent Storage...
  464. [  OK  ] Started Apply Kernel Variables.
  465. [  OK  ] Started Set the console keyboard layout.
  466. [  OK  ] Reached target Local File Systems (Pre).
  467. [  OK  ] Reached target Local File Systems.
  468.          Starting Tell Plymouth To Write Out Runtime Data...
  469.          Starting Set console font and keymap...
  470. [  OK  ] Started Flush Journal to Persistent Storage.
  471. [  OK  ] Started Tell Plymouth To Write Out Runtime Data.
  472. [  OK  ] Started Set console font and keymap.
  473.          Starting Create Volatile Files and Directories...
  474. [  OK  ] Started udev Kernel Device Manager.
  475. [  OK  ] Started Create Volatile Files and Directories.
  476.          Starting Network Time Synchronization...
  477.          Starting Update UTMP about System Boot/Shutdown...
  478.          Starting Network Name Resolution...
  479. [  OK  ] Started udev Coldplug all Devices.
  480. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  481. [  OK  ] Started Dispatch Password Requests to Console Directory Watch.
  482. [  OK  ] Reached target Local Encrypted Volumes.
  483. [  OK  ] Started Network Time Synchronization.
  484. [  OK  ] Started Network Name Resolution.
  485. [  OK  ] Reached target Host and Network Name Lookups.
  486. [  OK  ] Reached target System Initialization.
  487.          Starting Socket activation for snappy daemon.
  488. [  OK  ] Started Message of the Day.
  489. [  OK  ] Listening on D-Bus System Message Bus Socket.
  490. [  OK  ] Started Daily Cleanup of Temporary Directories.
  491. [  OK  ] Reached target Paths.
  492. [  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  493. [  OK  ] Reached target System Time Synchronized.
  494. [  OK  ] Started Discard unused blocks once a week.
  495. [  OK  ] Started Daily apt download activities.
  496. [  OK  ] Started Daily apt upgrade and clean activities.
  497. [  OK  ] Reached target Timers.
  498. [  OK  ] Listening on Socket activation for snappy daemon.
  499. [  OK  ] Reached target Sockets.
  500. [  OK  ] Reached target Basic System.
  501. [  OK  ] Started Regular background program processing daemon.
  502.          Starting System Logging Service...
  503.          Starting Restore /etc/resolv.conf i��…fore the ppp link was shut down...
  504.          Starting LSB: automatic crash report generation...
  505.          Starting Accounts Service...
  506.          Starting Login Service...
  507.          Starting Resize root filesystem to fit available disk space...
  508.          Starting Disk Manager...
  509. [  OK  ] Started D-Bus System Message Bus.
  510.          Starting WPA supplicant...
  511.          Starting Network Manager...
  512. [  OK  ] Started Set the CPU Frequency Scaling governor.
  513.          Starting Dispatcher daemon for systemd-networkd...
  514.          Starting Avahi mDNS/DNS-SD Stack...
  515.          Starting Snappy daemon...
  516.          Starting Adbd for linux...
  517.          Starting Modem Manager...
  518. [  OK  ] Started System Logging Service.
  519. [  OK  ] Started Restore /etc/resolv.conf if��…before the ppp link was shut down.
  520. [  OK  ] Found device /dev/ttyS2.
  521. [  OK  ] Started Login Service.
  522. [  OK  ] Started WPA supplicant.
  523. [  OK  ] Started Avahi mDNS/DNS-SD Stack.
  524. [  OK  ] Started LSB: automatic crash report generation.
  525. [FAILED] Failed to start Adbd for linux.
  526. See 'systemctl status adbd.service' for details.
  527.          Starting Authorization Manager...
  528. [  OK  ] Started Authorization Manager.
  529. [  OK  ] Started Accounts Service.
  530. [  OK  ] Started Disk Manager.
  531. [  OK  ] Started Modem Manager.
  532.          Starting Hostname Service...
  533. [    5.846876] squashfs: SQUASHFS error: Filesystem uses "xz" compression. This is not supported
  534. [  OK  ] Started Snappy daemon.
  535. [  OK  ] Started Hostname Service.
  536.          Starting Wait until snapd is fully seeded...
  537.          Starting Network Manager Script Dispatcher Service...
  538. [  OK  ] Started Network Manager Script Dispatcher Service.
  539. [  OK  ] Started Network Manager.
  540. [  OK  ] Reached target Network.
  541.          Starting /etc/rc.local Compatibility...
  542.          Starting Permit User Sessions...
  543.          Starting OpenBSD Secure Shell server...
  544. [  OK  ] Started /etc/rc.local Compatibility.
  545. [  OK  ] Started Permit User Sessions.
  546.          Starting Hold until boot process finishes up...
  547. [  OK  ] Started Hold until boot process finishes up.
  548. [  OK  ] Started Serial Getty on ttyS2.
  549.          Starting Set console scheme...

  551. Ubuntu 18.04.2 LTS firefly ttyS2

  553. firefly login: root (automatic login)

  555. [  OK  ] Started Set console scheme.
  556. [  OK  ] Created slice system-getty.slice.
  557. [  OK  ] Started Getty on tty1.
  558. [  OK  ] Reached target Login Prompts.
  559. [  OK  ] Started OpenBSD Secure Shell server.
  560. Welcome to Ubuntu 18.04.2 LTS (GNU/Linux 4.20.0 aarch64)

  562. * Documentation:  https://help.ubuntu.com
  563. * Management:     https://landscape.canonical.com
  564. * Support:        https://ubuntu.com/advantage
  565. This system has been minimized by removing packages and content that are
  566. not required on a system that users do not log into.

  568. To restore this content, you can run the 'unminimize' command.

  570. The programs included with the Ubuntu system are free software;
  571. the exact distribution terms for each program are described in the
  572. individual files in /usr/share/doc/*/copyright.

  574. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
  575. applicable law.

  577. [  OK  ] Started Dispatcher daemon for systemd-networkd.
  578. [  OK  ] Started Resize root filesystem to fit available disk space.
  579. [  OK  ] Created slice User Slice of root.
  580. [  OK  ] Started Session 1 of user root.
  581.          Starting User Manager for UID 0...
  582.          Starting Setup rockchip platform environment...
  583. [  OK  ] Started User Manager for UID 0.
  584. [  OK  ] Started Setup rockchip platform environment.
  585.          Starting Light Display Manager...
  586. root@firefly:~# [  OK  ] Started Light Display Manager.
复制代码


回复

使用道具 举报

ifuxiao.net

42

积分

0

威望

0

贡献

技术小白

积分
42
发表于 2020-2-25 13:31:14        只看该作者  7#
Lazyfan 发表于 2020-2-25 09:48
最后一行的exitcode值应该是关键，但是我不知道这个值是代表什么意思。
你试试用官方的启动参数，看看行 ...

用官方的直接卡住了，通过多次反复实验，只需加上boot=/dev/mmcblk0p5 rw rootfstyhpe=ext4 rootwait即可。直接用官方提供的会卡在kernel启动的时候，显示如下：
  1. ## Booting Android Image at 0x0027f800 ...
  2. Kernel load addr 0x00280000 size 18695 KiB
  3. ## Flattened Device Tree blob at 08300000
  4.    Booting using the fdt blob at 0x8300000
  5.    XIP Kernel Image ... OK
  6.    Using Device Tree in place at 0000000008300000, end 000000000830b25e
  7. Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
  8. Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
  9. Total: 3901.546 ms
  10. Starting kernel ...
复制代码
回复

使用道具 举报

ifuxiao.net

42

积分

0

威望

0

贡献

技术小白

积分
42
发表于 2020-2-26 23:37:09        只看该作者  8#
通过不断摸索，终于可以显示了，但好像只在kernel阶段显示了logo，在ubuntu启动以后就什么也不显示，显示器黑屏。在终端下一下都正常，网络等均可以使用，就是看不到桌面。
  1. 添加如下代码，可以正常启动，在kernel启动阶段，显示器有显示，但似乎进不了桌面。
  2. chosen {
  3.                 bootargs = "root=/dev/mmcblk0p5 rw rootfstype=ext4 rootwait systemd.gpt_auto=0";
  4.                 stdout-path = "serial2:1500000n8";
  5. };

  7. reserved-memory {
  8.     #address-cells = <2>;
  9.     #size-cells = <2>;
  10.     ranges;

  12.     drm_logo: drm-logo@00000000 {
  13.       compatible = "rockchip,drm-logo";
  14.       reg = <0x0 0x0 0x0 0x0>;
  15.     };
  16. };
  17. &display_subsystem {
  18.   logo-memory-region = <&drm_logo>;
  19.   status = "okay";
  20.   route {
  21.     route_hdmi: route-hdmi {
  22.       status = "disabled";
  23.       logo,uboot = "logo.bmp";
  24.       logo,kernel = "logo_kernel.bmp";
  25.       logo,mode = "center";
  26.       charge_logo,mode = "center";
  27.       connect = <&vop_out_hdmi>;
  28.     };
  29.   };
  30. };

  32. &route_hdmi {
  33.   status = "okay";
  34. };

  36. DDR version 1.13 20180428
  37. ID:0x805 N
  38. In
  39. SRX
  40. DDR4
  41. 333MHz
  42. Bus Width=32 Col=10 Bank=4 Bank Group=2 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  43. ddrconfig:19
  44. OUT
  45. Boot1 Release Time: Sep  7 2018 15:49:55, version: 2.49
  46. ChipType = 0x11, 272
  47. mmc2:cmd19,100
  48. SdmmcInit=2 0
  49. BootCapSize=2000
  50. UserCapSize=14910MB
  51. FwPartOffset=2000 , 2000
  52. SdmmcInit=0 NOT PRESENT
  53. StorageInit ok = 19592
  54. Raw SecureMode = 0
  55. SecureInit read PBA: 0x4
  56. SecureInit read PBA: 0x404
  57. SecureInit read PBA: 0x804
  58. SecureInit read PBA: 0xc04
  59. SecureInit read PBA: 0x1004
  60. SecureInit ret = 0, SecureMode = 0
  61. GPT part:  0, name:            uboot, start:0x4000, size:0x2000
  62. GPT part:  1, name:            trust, start:0x6000, size:0x2000
  63. GPT part:  2, name:             boot, start:0xa000, size:0x10000
  64. GPT part:  3, name:           backup, start:0x2a000, size:0x10000
  65. GPT part:  4, name:           rootfs, start:0x5a000, size:0x1cc4fdf
  66. find partition:uboot OK. first_lba:0x4000.
  67. find partition:trust OK. first_lba:0x6000.
  68. LoadTrust Addr:0x6000
  69. No find bl30.bin
  70. Load uboot, ReadLba = 4000
  71. Load OK, addr=0x200000, size=0xce990
  72. RunBL31 0x10000
  73. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-194-g646eecc5 #61 Wed Dec  5 06:31:51 UTC )

  75. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4

  77. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


  80. U-Boot 2017.09-g0b1f585323-dirty (Feb 26 2020 - 17:05:44 +0800)

  82. Model: Firefly ROC-RK3328-CC
  83. DRAM:  2 GiB
  84. Relocation Offset is: 7dbf5000
  85. Sysmem: init
  86. Using default environment

  88. rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
  89. Card did not respond to voltage select!
  90. mmc_init: -95, time 9
  91. switch to partitions #0, OK
  92. mmc0(part 0) is current device
  93. Bootdev: mmc 0
  94. PartType: EFI
  95. get part misc fail -1
  96. boot mode: normal
  97. Load FDT from boot part
  98. DTB: rk-kernel.dtb
  99. Can't get crtc id, default set to id = 0
  100. start get public phy
  101. Warn: can't find phy driver
  102. In:    serial
  103. Out:   serial
  104. Err:   serial
  105. Model: Firefly roc-rk3328-cc
  106. rockchip_dnl_key_pressed adc_channel_single_shot fail! ret=-22
  107. Rockchip UBOOT DRM driver version: v1.0.1
  108. use default hdmi phy table
  109. xfer: num: 2, addr: 0x50
  110. xfer: num: 2, addr: 0x50
  111. Monitor has basic audio support
  112. Could not find baseparameter partition
  113. mode:1920x1080
  114. CEA mode used vic=16
  115. final pixclk = 148500000 tmdsclk = 148500000
  116. start Inno HDMI PHY Power On
  117. tmdsclock = 148500000; chipversion = 2
  118. Inno HDMI PHY Power On
  119. sink has audio support
  120. hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
  121. CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0N/A)
  122.   apll 400000 KHz
  123.   dpll 664000 KHz
  124.   cpll 1200000 KHz
  125.   gpll 491009 KHz
  126.   npll 600000 KHz
  127.   armclk 600000 KHz
  128.   aclk_bus 150000 KHz
  129.   hclk_bus 75000 KHz
  130.   pclk_bus 75000 KHz
  131.   aclk_peri 150000 KHz
  132.   hclk_peri 75000 KHz
  133.   pclk_peri 75000 KHz
  134. Net:   
  135. Warning: ethernet@ff540000 (eth0) using random MAC address - ba:e1:0b:dc:a2:19
  136. eth0: ethernet@ff540000
  137. Hit key to stop autoboot('CTRL+C'):  0
  138. android_bootloader_boot_flow Could not find misc partition
  139. ANDROID: reboot reason: "(none)"
  140. Fdt Ramdisk skip relocation
  141. FDT load addr 0x10f00000 size 162 KiB
  142. Booting kernel at 0x00280000 with fdt at 0x8300000...


  145. ## Booting Android Image at 0x0027f800 ...
  146. Kernel load addr 0x00280000 size 23737 KiB
  147. ## Flattened Device Tree blob at 08300000
  148.    Booting using the fdt blob at 0x8300000
  149.    XIP Kernel Image ... OK
  150.    Using Device Tree in place at 0000000008300000, end 000000000830bdaf
  151. Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
  152. Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
  153. Can't find file:logo_kernel.bmp
  154. Total: 4271.507 ms

  156. Starting kernel ...


  159. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  160. [    0.000000] Linux version 5.5.0 (msw@msw-Z97M-D3H) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)0
  161. [    0.000000] Machine model: Firefly roc-rk3328-cc
  162. [    0.000000] efi: Getting EFI parameters from FDT:
  163. [    0.000000] efi: UEFI not found.
  164. [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
  165. [    0.000000] NUMA: No NUMA configuration found
  166. [    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  167. [    0.000000] NUMA: NODE_DATA [mem 0x7db3e100-0x7db3ffff]
  168. [    0.000000] Zone ranges:
  169. [    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
  170. [    0.000000]   DMA32    [mem 0x0000000040000000-0x000000007fffffff]
  171. [    0.000000]   Normal   empty
  172. [    0.000000] Movable zone start for each node
  173. [    0.000000] Early memory node ranges
  174. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
  175. [    0.000000]   node   0: [mem 0x000000000a200000-0x000000007fffffff]
  176. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  177. [    0.000000] psci: probing for conduit method from DT.
  178. [    0.000000] psci: PSCIv1.0 detected in firmware.
  179. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  180. [    0.000000] psci: Trusted OS migration not required
  181. [    0.000000] psci: SMC Calling Convention v1.0
  182. [    0.000000] percpu: Embedded 22 pages/cpu s53144 r8192 d28776 u90112
  183. [    0.000000] Detected VIPT I-cache on CPU0
  184. [    0.000000] CPU features: detected: ARM erratum 845719
  185. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 507912
  186. [    0.000000] Policy zone: DMA32
  187. [    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc androidboot.slot_suffix= andro0
  188. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  189. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  190. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  191. [    0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
  192. [    0.000000] Memory: 1900384K/2064384K available (11452K kernel code, 1720K rwdata, 5860K rodata, 4672K )
  193. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  194. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  195. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  196. [    0.000000]  Tasks RCU enabled.
  197. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  198. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  199. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  200. [    0.000000] GIC: Using split EOI/Deactivate mode
  201. [    0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x454 with crng_init=0
  202. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  203. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns:s
  204. [    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  205. [    0.001746] Console: colour dummy device 80x25
  206. [    0.002532] printk: console [tty0] enabled
  207. [    0.002713] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS ()
  208. [    0.002756] pid_max: default: 32768 minimum: 301
  209. [    0.002916] LSM: Security Framework initializing
  210. [    0.003042] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  211. [    0.003091] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  212. [    0.027916] ASID allocator initialised with 32768 entries
  213. [    0.035899] rcu: Hierarchical SRCU implementation.
  214. [    0.048141] EFI services will not be available.
  215. [    0.056165] smp: Bringing up secondary CPUs ...
  216. [    0.088449] Detected VIPT I-cache on CPU1
  217. [    0.088540] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  218. [    0.120549] Detected VIPT I-cache on CPU2
  219. [    0.120630] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  220. [    0.152656] Detected VIPT I-cache on CPU3
  221. [    0.152733] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  222. [    0.152878] smp: Brought up 1 node, 4 CPUs
  223. [    0.153006] SMP: Total of 4 processors activated.
  224. [    0.153029] CPU features: detected: 32-bit EL0 Support
  225. [    0.153053] CPU features: detected: CRC32 instructions
  226. [    0.164377] CPU: All CPU(s) started at EL2
  227. [    0.164482] alternatives: patching kernel code
  228. [    0.166849] devtmpfs: initialized
  229. [    0.178634] KASLR disabled due to lack of seed
  230. [    0.179391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 764504178510000s
  231. [    0.179459] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  232. [    0.181531] pinctrl core: initialized pinctrl subsystem
  233. [    0.183844] thermal_sys: Registered thermal governor 'fair_share'
  234. [    0.183849] thermal_sys: Registered thermal governor 'step_wise'
  235. [    0.183889] thermal_sys: Registered thermal governor 'power_allocator'
  236. [    0.184498] DMI not present or invalid.
  237. [    0.185189] NET: Registered protocol family 16
  238. [    0.190841] DMA: preallocated 256 KiB pool for atomic allocations
  239. [    0.190915] audit: initializing netlink subsys (disabled)
  240. [    0.191297] audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1
  241. [    0.193365] cpuidle: using governor menu
  242. [    0.193646] NET: Registered protocol family 42
  243. [    0.194219] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  244. [    0.238538] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  245. [    0.238585] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  246. [    0.238611] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  247. [    0.238636] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  248. [    0.242465] cryptd: max_cpu_qlen set to 1000
  249. [    0.249197] ACPI: Interpreter disabled.
  250. [    0.252283] vcc_sys: supplied by dc_12v
  251. [    0.252961] vcc_host1_5v: supplied by vcc_sys
  252. [    0.254309] iommu: Default domain type: Translated
  253. [    0.255861] vgaarb: loaded
  254. [    0.256491] SCSI subsystem initialized
  255. [    0.257236] usbcore: registered new interface driver usbfs
  256. [    0.257328] usbcore: registered new interface driver hub
  257. [    0.257457] usbcore: registered new device driver usb
  258. [    0.258082] pps_core: LinuxPPS API ver. 1 registered
  259. [    0.258108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  260. [    0.258159] PTP clock support registered
  261. [    0.258216] EDAC MC: Ver: 3.0.0
  262. [    0.260264] FPGA manager framework
  263. [    0.260439] Advanced Linux Sound Architecture Driver Initialized.
  264. [    0.261949] clocksource: Switched to clocksource arch_sys_counter
  265. [    0.262399] VFS: Disk quotas dquot_6.6.0
  266. [    0.262520] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  267. [    0.262876] pnp: PnP ACPI: disabled
  268. [    0.273436] NET: Registered protocol family 2
  269. [    0.274356] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  270. [    0.274451] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  271. [    0.274689] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  272. [    0.275092] TCP: Hash tables configured (established 16384 bind 16384)
  273. [    0.275344] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  274. [    0.275451] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  275. [    0.276019] NET: Registered protocol family 1
  276. [    0.276794] RPC: Registered named UNIX socket transport module.
  277. [    0.276831] RPC: Registered udp transport module.
  278. [    0.276850] RPC: Registered tcp transport module.
  279. [    0.276869] RPC: Registered tcp NFSv4.1 backchannel transport module.
  280. [    0.276903] PCI: CLS 0 bytes, default 64
  281. [    0.278544] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  282. [    0.278978] kvm [1]: IPA Size Limit: 40bits
  283. [    0.280178] kvm [1]: vgic interrupt IRQ1
  284. [    0.280364] kvm [1]: Hyp mode initialized successfully
  285. [    0.292163] Initialise system trusted keyrings
  286. [    0.292503] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  287. [    0.304270] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  288. [    0.305533] NFS: Registering the id_resolver key type
  289. [    0.305608] Key type id_resolver registered
  290. [    0.305628] Key type id_legacy registered
  291. [    0.305658] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  292. [    0.332112] Key type asymmetric registered
  293. [    0.332156] Asymmetric key parser 'x509' registered
  294. [    0.332260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  295. [    0.332291] io scheduler mq-deadline registered
  296. [    0.332311] io scheduler kyber registered
  297. [    0.345226] IPMI message handler: version 39.2
  298. [    0.345836] EINJ: ACPI disabled.
  299. [    0.354447] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
  300. [    0.354497] dma-pl330 ff1f0000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  301. [    0.362396] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  302. [    0.365987] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A
  303. [    0.440159] printk: console [ttyS2] enabled
  304. [    0.444901] brd: module loaded
  305. [    0.458457] loop: module loaded
  306. [    0.464972] libphy: Fixed MDIO Bus: probed
  307. [    0.466500] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
  308. [    0.467120] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
  309. [    0.467858] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
  310. [    0.468570] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
  311. [    0.469215] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
  312. [    0.469732] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
  313. [    0.470307] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
  314. [    0.470937] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
  315. [    0.471568] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
  316. [    0.477134] rk_gmac-dwmac ff540000.ethernet: init for RGMII
  317. [    0.478008] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  318. [    0.478668] rk_gmac-dwmac ff540000.ethernet:         DWMAC1000
  319. [    0.479147] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
  320. [    0.479825] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
  321. [    0.480503] rk_gmac-dwmac ff540000.ethernet: COE Type 2
  322. [    0.480981] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
  323. [    0.481617] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
  324. [    0.482274] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
  325. [    0.482813] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
  326. [    0.483347] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  327. [    0.484084] rk_gmac-dwmac ff540000.ethernet: device MAC address ca:0b:a5:21:b6:e7
  328. [    0.577593] libphy: stmmac: probed
  329. [    0.577966] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  330. [    0.578828] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  331. [    0.581119] usbcore: registered new interface driver rtl8150
  332. [    0.581705] usbcore: registered new interface driver r8152
  333. [    0.582319] usbcore: registered new interface driver asix
  334. [    0.582863] usbcore: registered new interface driver ax88179_178a
  335. [    0.583458] usbcore: registered new interface driver cdc_ether
  336. [    0.584040] usbcore: registered new interface driver rndis_host
  337. [    0.584642] usbcore: registered new interface driver cdc_ncm
  338. [    0.585207] usbcore: registered new interface driver qmi_wwan
  339. [    0.585774] usbcore: registered new interface driver cdc_mbim
  340. [    0.586639] VFIO - User Level meta-driver version: 0.3
  341. [    0.589258] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
  342. [    0.590198] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
  343. [    0.718042] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  344. [    0.719230] dwc2 ff580000.usb: DWC OTG Controller
  345. [    0.719697] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
  346. [    0.720391] dwc2 ff580000.usb: irq 32, io mem 0xff580000
  347. [    0.721891] hub 1-0:1.0: USB hub found
  348. [    0.722330] hub 1-0:1.0: 1 port detected
  349. [    0.724518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  350. [    0.725123] ehci-pci: EHCI PCI platform driver
  351. [    0.725577] ehci-platform: EHCI generic platform driver
  352. [    0.728672] ehci-platform ff5c0000.usb: EHCI Host Controller
  353. [    0.729227] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
  354. [    0.730147] ehci-platform ff5c0000.usb: irq 33, io mem 0xff5c0000
  355. [    0.745978] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
  356. [    0.747569] hub 2-0:1.0: USB hub found
  357. [    0.747960] hub 2-0:1.0: 1 port detected
  358. [    0.748961] ehci-orion: EHCI orion driver
  359. [    0.749628] ehci-exynos: EHCI EXYNOS driver
  360. [    0.750233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  361. [    0.750880] ohci-pci: OHCI PCI platform driver
  362. [    0.751379] ohci-platform: OHCI generic platform driver
  363. [    0.752310] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
  364. [    0.752945] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
  365. [    0.753823] ohci-platform ff5d0000.usb: irq 34, io mem 0xff5d0000
  366. [    0.819047] hub 3-0:1.0: USB hub found
  367. [    0.819450] hub 3-0:1.0: 1 port detected
  368. [    0.820423] ohci-exynos: OHCI EXYNOS driver
  369. [    0.821841] usbcore: registered new interface driver cdc_wdm
  370. [    0.822547] usbcore: registered new interface driver usb-storage
  371. [    0.827259] i2c /dev entries driver
  372. [    0.830951] rk808 1-0018: chip id: 0x8050
  373. [    0.840223] rk808-regulator rk808-regulator: there is no dvs0 gpio
  374. [    0.840882] rk808-regulator rk808-regulator: there is no dvs1 gpio
  375. [    0.841528] DCDC_REG1: supplied by vcc_sys
  376. [    0.845016] DCDC_REG2: supplied by vcc_sys
  377. [    0.847359] DCDC_REG3: supplied by vcc_sys
  378. [    0.848061] DCDC_REG4: supplied by vcc_sys
  379. [    0.849681] LDO_REG1: supplied by vcc_io
  380. [    0.853347] LDO_REG2: supplied by vcc_io
  381. [    0.856785] LDO_REG3: supplied by vcc_io
  382. [    0.865694] rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru)
  383. [    0.866572] rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low)
  384. [    0.870985] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap0
  385. [    0.874017] sdhci: Secure Digital Host Controller Interface driver
  386. [    0.874581] sdhci: Copyright(c) Pierre Ossman
  387. [    0.875340] Synopsys Designware Multimedia Card Interface Driver
  388. [    0.876793] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  389. [    0.877470] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  390. [    0.878193] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  391. [    0.878761] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep o
  392. [    0.879681] vcc_sd: supplied by vcc_io
  393. [    0.880873] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
  394. [    0.881547] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
  395. [    0.882189] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
  396. [    0.882751] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep o
  397. [    0.884350] mmc_host mmc0: card is non-removable.
  398. [    0.897536] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  399. [    0.911663] sdhci-pltfm: SDHCI platform and OF driver helper
  400. [    0.913732] ledtrig-cpu: registered to indicate activity on CPUs
  401. [    0.915764] usbcore: registered new interface driver usbhid
  402. [    0.916344] usbhid: USB HID core driver
  403. [    0.921725] Initializing XFRM netlink socket
  404. [    0.922778] NET: Registered protocol family 10
  405. [    0.924351] Segment Routing with IPv6
  406. [    0.924758] NET: Registered protocol family 17
  407. [    0.925201] NET: Registered protocol family 15
  408. [    0.925650] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scrip.
  409. [    0.926929] Key type dns_resolver registered
  410. [    0.927900] registered taskstats version 1
  411. [    0.928272] Loading compiled-in X.509 certificates
  412. [    0.950555] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  413. [    0.951254] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  414. [    0.951879] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  415. [    0.952429] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep o
  416. [    0.960608] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  417. [    0.961288] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  418. [    0.961894] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  419. [    0.962478] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep o
  420. [    0.965832] hctosys: unable to open rtc device (rtc0)
  421. [    0.967840] ALSA device list:
  422. [    0.968133]   No soundcards found.
  423. [    0.968984] Waiting for root device /dev/mmcblk0p5...
  424. [    0.983667] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ d)
  425. [    0.985221] random: fast init done
  426. [    0.992802] dwmmc_rockchip ff520000.dwmmc: All phases work, using default phase 0.
  427. [    0.993537] mmc0: new HS200 MMC card at address 0001
  428. [    0.999039] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
  429. [    0.999855] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB
  430. [    1.000775] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB
  431. [    1.001543] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB, chardev (243:0)
  432. [    1.009761]  mmcblk0: p1 p2 p3 p4 p5
  433. [    1.019765] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
  434. [    1.020447] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
  435. [    1.021055] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
  436. [    1.021605] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep o
  437. [    1.035181] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  438. [    1.035993] VFS: Mounted root (ext4 filesystem) on device 179:5.
  439. [    1.037873] devtmpfs: mounted
  440. [    1.041099] Freeing unused kernel memory: 4672K
  441. [    1.065990] Run /sbin/init as init process
  442. [    1.259357] systemd[1]: System time before build time, advancing clock.
  443. [    1.283491] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK)
  444. [    1.285890] systemd[1]: Detected architecture arm64.

  446. Welcome to Ubuntu 18.04.2 LTS!

  448. [    1.326737] systemd[1]: Set hostname to <firefly>.
  449. [    1.334640] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
  450. [    1.521474] systemd[1]: File /lib/systemd/system/systemd-udevd.service:34 configures an IP firewall (IP.
  451. [    1.523051] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the f)
  452. [    1.750531] random: systemd: uninitialized urandom read (16 bytes read)
  453. [    1.751724] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  454. [  OK  ] Started Forward Password Requests to Wall Directory Watch.
  455. [    1.762147] random: systemd: uninitialized urandom read (16 bytes read)
  456. [    1.762830] systemd[1]: Reached target Remote File Systems.
  457. [  OK  ] Reached target Remote File Systems.
  458. [    1.774114] random: systemd: uninitialized urandom read (16 bytes read)
  459. [    1.774789] systemd[1]: Reached target User and Group Name Lookups.
  460. [  OK  ] Reached target User and Group Name Lookups.
  461. [    1.786280] systemd[1]: Reached target Swap.
  462. [  OK  ] Reached target Swap.
  463. [  OK  ] Created slice User and Session Slice.
  464. [  OK  ] Created slice System Slice.
  465. [  OK  ] Listening on Journal Socket.
  466.          Starting Set the console keyboard layout...
  467. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  468.          Starting Create Static Device Nodes in /dev...
  469. [  OK  ] Listening on udev Control Socket.
  470.          Mounting Kernel Debug File System...
  471. [  OK  ] Listening on udev Kernel Socket.
  472.          Starting udev Coldplug all Devices...
  473. [  OK  ] Listening on Journal Socket (/dev/log).
  474. [  OK  ] Created slice system-serial\x2dgetty.slice.
  475.          Starting Remount Root and Kernel File Systems...
  476.          Mounting POSIX Message Queue File System...
  477.          Mounting Huge Pages File System...
  478. [  OK  ] Reached target Slices.
  479.          Starting Load Kernel Modules...
  480. [  OK  ] Listening on Journal Audit Socket.
  481. [  OK  ] Listening on Syslog Socket.
  482.          Starting Journal Service...
  483. [  OK  ] Started Create Static Device Nodes in /dev.
  484. [  OK  ] Mounted Kernel Debug File System.
  485. [  OK  ] Started Remount Root and Kernel File Systems.
  486. [  OK  ] Mounted POSIX Message Queue File System.
  487. [  OK  ] Mounted Huge Pages File System.
  488. [  OK  ] Started Load Kernel Modules.
  489.          Mounting Kernel Configuration File System...
  490.          Starting Apply Kernel Variables...
  491.          Starting Load/Save Random Seed...
  492.          Starting udev Kernel Device Manager...
  493. [  OK  ] Mounted Kernel Configuration File System.
  494. [  OK  ] Started Load/Save Random Seed.
  495. [  OK  ] Started Apply Kernel Variables.
  496. [  OK  ] Started Set the console keyboard layout.
  497. [  OK  ] Reached target Local File Systems (Pre).
  498. [  OK  ] Reached target Local File Systems.
  499.          Starting Tell Plymouth To Write Out Runtime Data...
  500.          Starting Set console font and keymap...
  501. [  OK  ] Started Tell Plymouth To Write Out Runtime Data.
  502. [  OK  ] Started Set console font and keymap.
  503. [  OK  ] Started udev Kernel Device Manager.
  504. [  OK  ] Started udev Coldplug all Devices.
  505. [  OK  ] Started Dispatch Password Requests to Console Directory Watch.
  506. [  OK  ] Reached target Local Encrypted Volumes.
  507. [  OK  ] Started Journal Service.
  508.          Starting Flush Journal to Persistent Storage...
  509. [  OK  ] Started Flush Journal to Persistent Storage.
  510.          Starting Create Volatile Files and Directories...
  511. [  OK  ] Started Create Volatile Files and Directories.
  512.          Starting Update UTMP about System Boot/Shutdown...
  513.          Starting Network Name Resolution...
  514.          Starting Network Time Synchronization...
  515. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  516. [  OK  ] Started Network Name Resolution.
  517. [  OK  ] Started Network Time Synchronization.
  518. [  OK  ] Reached target System Time Synchronized.
  519. [  OK  ] Reached target System Initialization.
  520. [  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  521. [  OK  ] Started Daily apt download activities.
  522. [  OK  ] Started Daily Cleanup of Temporary Directories.
  523. [  OK  ] Started Daily apt upgrade and clean activities.
  524. [  OK  ] Started Discard unused blocks once a week.
  525. [  OK  ] Reached target Paths.
  526. [  OK  ] Listening on D-Bus System Message Bus Socket.
  527. [  OK  ] Started Message of the Day.
  528. [  OK  ] Reached target Timers.
  529.          Starting Socket activation for snappy daemon.
  530. [  OK  ] Reached target Host and Network Name Lookups.
  531. [  OK  ] Listening on Socket activation for snappy daemon.
  532. [  OK  ] Reached target Sockets.
  533. [  OK  ] Reached target Basic System.
  534.          Starting Restore /etc/resolv.conf i��…fore the ppp link was shut down...
  535.          Starting Dispatcher daemon for systemd-networkd...
  536.          Starting System Logging Service...
  537.          Starting LSB: automatic crash report generation...
  538.          Starting Accounts Service...
  539.          Starting Modem Manager...
  540.          Starting Adbd for linux...
  541. [  OK  ] Started Regular background program processing daemon.
  542. [  OK  ] Started Set the CPU Frequency Scaling governor.
  543. [  OK  ] Started D-Bus System Message Bus.
  544.          Starting Network Manager...
  545.          Starting WPA supplicant...
  546.          Starting Avahi mDNS/DNS-SD Stack...
  547.          Starting Resize root filesystem to fit available disk space...
  548.          Starting Disk Manager...
  549.          Starting Login Service...
  550.          Starting Snappy daemon...
  551. [  OK  ] Started System Logging Service.
  552. [  OK  ] Started Restore /etc/resolv.conf if��…before the ppp link was shut down.
  553. [FAILED] Failed to start Adbd for linux.
  554. See 'systemctl status adbd.service' for details.
  555. [  OK  ] Found device /dev/ttyS2.
  556. [  OK  ] Started Avahi mDNS/DNS-SD Stack.
  557. [  OK  ] Started WPA supplicant.
  558. [  OK  ] Started Login Service.
  559.          Starting Authorization Manager...
  560. [  OK  ] Started LSB: automatic crash report generation.
  561. [  OK  ] Started Authorization Manager.
  562. [  OK  ] Started Accounts Service.
  563.          Starting Hostname Service...
  564. [  OK  ] Started Disk Manager.
  565. [  OK  ] Started Modem Manager.
  566. [  OK  ] Started Hostname Service.
  567. [    5.308493] Filesystem uses "xz" compression. This is not supported
  568. [  OK  ] Started Snappy daemon.
  569.          Starting Wait until snapd is fully seeded...
  570.          Starting Network Manager Script Dispatcher Service...
  571. [  OK  ] Started Network Manager Script Dispatcher Service.
  572. [  OK  ] Started Network Manager.
  573. [  OK  ] Reached target Network.
  574.          Starting Permit User Sessions...
  575.          Starting OpenBSD Secure Shell server...
  576.          Starting /etc/rc.local Compatibility...
  577. [  OK  ] Started /etc/rc.local Compatibility.
  578. [  OK  ] Started Permit User Sessions.
  579.          Starting Hold until boot process finishes up...
  580. [  OK  ] Started Hold until boot process finishes up.
  581. [  OK  ] Started Serial Getty on ttyS2.
  582.          Starting Set console scheme...
  583. [  OK  ] Started Set console scheme.
  584. [  OK  ] Created slice system-getty.slice.
  585. [  OK  ] Started Getty on tty1.
  586. [  OK  ] Reached target Login Prompts.
  587. [  OK  ] Started OpenBSD Secure Shell server.

  589. Ubuntu 18.04.2 LTS firefly ttyS2

  591. firefly login: root (automatic login)

  593. Welcome to Ubuntu 18.04.2 LTS (GNU/Linux 5.5.0 aarch64)

  595. * Documentation:  https://help.ubuntu.com
  596. * Management:     https://landscape.canonical.com
  597. * Support:        https://ubuntu.com/advantage
  598. This system has been minimized by removing packages and content that are
  599. not required on a system that users do not log into.

  601. To restore this content, you can run the 'unminimize' command.

  603. The programs included with the Ubuntu system are free software;
  604. the exact distribution terms for each program are described in the
  605. individual files in /usr/share/doc/*/copyright.

  607. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
  608. applicable law.

  610. [  OK  ] Started Resize root filesystem to fit available disk space.
  611. [  OK  ] Created slice User Slice of root.
  612. [  OK  ] Started Session 1 of user root.
  613.          Starting User Manager for UID 0...
  614.          Starting Setup rockchip platform environment...
  615. [  OK  ] Started User Manager for UID 0.
  616. [  OK  ] Started Setup rockchip platform environment.
  617.          Starting Light Display Manager...
  618. root@firefly:~# [  OK  ] Started Light Display Manager.
  619. [  OK  ] Stopped Light Display Manager.
  620.          Starting Light Display Manager...
  621. [  OK  ] Started Light Display Manager.
  622. [  OK  ] Stopped Light Display Manager.
  623.          Starting Light Display Manager...
  624. [  OK  ] Started Light Display Manager.
  625. [  OK  ] Started Wait until snapd is fully seeded.
  626. [  OK  ] Reached target Multi-User System.
  627. [  OK  ] Reached target Graphical Interface.
  628.          Starting Update UTMP about System Runlevel Changes...
  629. [  OK  ] Started Update UTMP about System Runlevel Changes.

复制代码
回复

使用道具 举报

ifuxiao.net

42

积分

0

威望

0

贡献

技术小白

积分
42
发表于 2020-2-27 21:48:24        只看该作者  9#
整了一天了，还是没有解决显示问题。
启动时显示的信息为：

[    0.950348] inno-hdmi-phy ff430000.phy: failed to register clock: -17
[    0.951244] inno-hdmi-phy: probe of ff430000.phy failed with error -17

正常应该是这样的：
[    0.855840] inno-hdmi-phy ff430000.hdmiphy: phy had been powered up
回复

使用道具 举报

ifuxiao.net

42

积分

0

威望

0

贡献

技术小白

积分
42
发表于 2020-3-13 19:05:03        只看该作者  10#
经过无数次的实验，现在已经有了进展，但任然没有显示。

  1. U-Boot 2017.09-g0b1f585323-dirty (Mar 12 2020 - 09:01:54 +0800)
  2.    
  3. Model: Firefly ROC-RK3328-CC
  4. DRAM:  2 GiB   
  5. Relocation Offset is: 7dbf5000   
  6. Sysmem: init   
  7. Using default environment   
  8.    
  9. rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
  10. Card did not respond to voltage select!
  11. mmc_init: -95, time 9
  12. switch to partitions #0, OK
  13. mmc0(part 0) is current device   
  14. Bootdev: mmc 0  
  15. PartType: EFI   
  16. get part misc fail -1
  17. boot mode: normal     
  18. Load FDT from boot part     
  19. DTB: rk-kernel.dtb   
  20. Can't get crtc id, default set to id = 0
  21. start get public phy  
  22. use default hdmi phy table  
  23. inno hdmi phy init success, save it     
  24. In:    serial   
  25. Out:   serial   
  26. Err:   serial   
  27. Model: Firefly roc-rk3328-cc
  28. rockchip_dnl_key_pressed adc_channel_single_shot fail! ret=-22  
  29. Rockchip UBOOT DRM driver version: v1.0.1     
  30. use default hdmi phy table  
  31. xfer: num: 2, addr: 0x50   
  32. [dw_hdmi_i2c_read] i2c read reg[0x01] no interrupt  
  33. xfer: num: 2, addr: 0x50   
  34. [dw_hdmi_i2c_read] i2c read reg[0x01] no interrupt  
  35. xfer: num: 2, addr: 0x50   
  36. [dw_hdmi_i2c_read] i2c read reg[0x01] no interrupt  
  37. xfer: num: 2, addr: 0x50   
  38. [dw_hdmi_i2c_read] i2c read reg[0x01] no interrupt  
  39. xfer: num: 2, addr: 0x50   
  40. [dw_hdmi_i2c_read] i2c read reg[0x01] no interrupt  
  41. can't get edid block:0
  42. failed to get edid   
  43. Could not find baseparameter partition  
  44. mode:1920x1080  
  45. CEA mode used vic=16  
  46. final pixclk = 148500000 tmdsclk = 148500000  
  47. start Inno HDMI PHY Power On
  48. tmdsclock = 148500000; chipversion = 2  
  49. Inno HDMI PHY Power On
  50. sink has audio support
  51. hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500     
  52. CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0N/A)     
  53.   apll 400000 KHz     
  54.   dpll 664000 KHz     
  55.   cpll 1200000 KHz   
  56.   gpll 491009 KHz     
  57.   npll 600000 KHz     
  58.   armclk 600000 KHz   
  59.   aclk_bus 150000 KHz
  60.   hclk_bus 75000 KHz  
  61.   pclk_bus 75000 KHz  
  62.   aclk_peri 150000 KHz
  63.   hclk_peri 75000 KHz
  64.   pclk_peri 75000 KHz
  65. Net:
  66. Warning: ethernet@ff540000 (eth0) using random MAC address - 7a:9c:21:04:a9:7d   
  67. eth0: ethernet@ff540000     
  68. Hit key to stop autoboot('CTRL+C'):  0  
  69. android_bootloader_boot_flow Could not find misc partition
  70. ANDROID: reboot reason: "(none)"  
  71. Fdt Ramdisk skip relocation
  72. FDT load addr 0x10f00000 size 307 KiB   
  73. Booting kernel at 0x00280000 with fdt at 0x8300000...     
  74.    
  75.    
  76. ## Booting Android Image at 0x0027f800 ...   
  77. Kernel load addr 0x00280000 size 18971 KiB   
  78. ## Flattened Device Tree blob at 08300000     
  79.    Booting using the fdt blob at 0x8300000   
  80.    XIP Kernel Image ... OK  
  81.    Using Device Tree in place at 0000000008300000, end 000000000830bb27     
  82. Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)   
  83. Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)   
  84. Total: 4010.781 ms   
  85.    
  86. Starting kernel ...   
  87.    
  88.    
  89. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  90. [    0.000000] Linux version 5.5.0 (msw@msw-Z97M-D3H) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #7 SMP PREEMPT Fri Mar 13 18:10:24 CST 2020   
  91. [    0.000000] Machine model: Firefly roc-rk3328-cc
  92. [    0.000000] efi: Getting EFI parameters from FDT:
  93. [    0.000000] efi: UEFI not found.     
  94. [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
  95. [    0.000000] NUMA: No NUMA configuration found   
  96. [    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  97. [    0.000000] NUMA: NODE_DATA [mem 0x7db19100-0x7db1afff]
  98. [    0.000000] Zone ranges:
  99. [    0.000000]   DMA[mem 0x0000000000200000-0x000000003fffffff]
  100. [    0.000000]   DMA32    [mem 0x0000000040000000-0x000000007fffffff]
  101. [    0.000000]   Normal   empty   
  102. [    0.000000] Movable zone start for each node     
  103. [    0.000000] Early memory node ranges
  104. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
  105. [    0.000000]   node   0: [mem 0x000000000a200000-0x000000007fffffff]
  106. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]   
  107. [    0.000000] psci: probing for conduit method from DT.  
  108. [    0.000000] psci: PSCIv1.0 detected in firmware.
  109. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  110. [    0.000000] psci: Trusted OS migration not required   
  111. [    0.000000] psci: SMC Calling Convention v1.0   
  112. [    0.000000] percpu: Embedded 22 pages/cpu s52824 r8192 d29096 u90112     
  113. [    0.000000] Detected VIPT I-cache on CPU0  
  114. [    0.000000] CPU features: detected: ARM erratum 845719
  115. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 507912
  116. [    0.000000] Policy zone: DMA32
  117. [    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc androidboot.slot_suffix= androidboot.serialno=1cb27b34a6de9e11  rw rootwait root=/dev/mmcblk0p50
  118. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  119. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  120. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  121. [    0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)   
  122. [    0.000000] Memory: 1905028K/2064384K available (11068K kernel code, 794K rwdata, 4568K rodata, 2496K init, 425K bss, 126588K reserved, 32768K cma-reserved)
  123. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1   
  124. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  125. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.   
  126. [    0.000000]  Tasks RCU enabled.
  127. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.   
  128. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  129. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0   
  130. [    0.000000] GIC: Using split EOI/Deactivate mode
  131. [    0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x454 with crng_init=0
  132. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).  
  133. [ my device 80x25     
  134. [    0.001650] printk: console [tty0] enabled
  135. [    0.001810] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)  
  136. [    0.001853] pid_max: default: 32768 minimum: 301
  137. [    0.002011] LSM: Security Framework initializing
  138. [    0.002134] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)     
  139. [    0.002181] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  140. [    0.027870] ASID allocator initialised with 32768 entries   
  141. [    0.035846] rcu: Hierarchical SRCU implementation.     
  142. [    0.045456] EFI services will not be available.  
  143. [    0.051948] smp: Bringing up secondary CPUs ...  
  144. [    0.084220] Detected VIPT I-cache on CPU1  
  145. [    0.084306] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]   
  146. [    0.116323] Detected VIPT I-cache on CPU2  
  147. [    0.116400] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]   
  148. [    0.148435] Detected VIPT I-cache on CPU3  
  149. [    0.148509] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]   
  150. [    0.148661] smp: Brought up 1 node, 4 CPUs
  151. [    0.148792] SMP: Total of 4 processors activated.
  152. [    0.148815] CPU features: detected: 32-bit EL0 Support
  153. [    0.148838] CPU features: detected: CRC32 instructions
  154. [    0.159687] CPU: All CPU(s) started at EL2
  155. [    0.159792] alternatives: patching kernel code   
  156. [    0.162161] devtmpfs: initialized   
  157. [    0.173818] KASLR disabled due to lack of seed   
  158. [    0.174574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns  
  159. [    0.174639] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)     
  160. [    0.176726] pinctrl core: initialized pinctrl subsystem
  161. [    0.177897] thermal_sys: Registered thermal governor 'step_wise'   
  162. [    0.177905] thermal_sys: Registered thermal governor 'power_allocator'   
  163. [    0.178479] DMI not present or invalid.   
  164. [    0.179035] NET: Registered protocol family 16   
  165. [    0.182098] DMA: preallocated 256 KiB pool for atomic allocations  
  166. [    0.182172] audit: initializing netlink subsys (disabled)   
  167. [    0.182534] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
  168. [    0.184155] cpuidle: using governor menu   
  169. [    0.184849] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  170. [    0.186365] Serial: AMBA PL011 UART driver
  171. [    0.222050] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  172. [    0.222097] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  173. [    0.222123] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  174. [    0.222147] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  175. [    0.225876] cryptd: max_cpu_qlen set to 1000     
  176. [    0.232090] ACPI: Interpreter disabled.   
  177. [    0.234362] vcc_sys: supplied by dc_12v   
  178. [    0.234957] vcc_host1_5v: supplied by vcc_sys   
  179. [    0.235921] iommu: Default domain type: Translated     
  180. [    0.237401] vgaarb: loaded     
  181. [    0.237976] SCSI subsystem initialized     
  182. [    0.238722] usbcore: registered new interface driver usbfs   
  183. [    0.238816] usbcore: registered new interface driver hub     
  184. [    0.238941] usbcore: registered new device driver usb  
  185. [    0.239470] pps_core: LinuxPPS API ver. 1 registered   
  186. [    0.239493] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>   
  187. [    0.239540] PTP clock support registered   
  188. [    0.239712] EDAC MC: Ver: 3.0.0
  189. [    0.240610] FPGA manager framework   
  190. [    0.240765] Advanced Linux Sound Architecture Driver Initialized.  
  191. [    0.242394] clocksource: Switched to clocksource arch_sys_counter  
  192. [    0.242836] VFS: Disk quotas dquot_6.6.0   
  193. [    0.242944] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)     
  194. [    0.243283] pnp: PnP ACPI: disabled  
  195. [    0.252706] NET: Registered protocol family 2   
  196. [    0.253371] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)   
  197. [    0.253459] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)     
  198. [    0.253695] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  199. [    0.254099] TCP: Hash tables configured (established 16384 bind 16384)   
  200. [    0.254340] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  201. [    0.254518] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)  
  202. [    0.255023] NET: Registered protocol family 1   
  203. [    0.255764] RPC: Registered named UNIX socket transport module.   
  204. [    0.255797] RPC: Registered udp transport module.
  205. [    0.255816] RPC: Registered tcp transport module.
  206. [    0.255834] RPC: Registered tcp NFSv4.1 backchannel transport module.   
  207. [    0.255870] PCI: CLS 0 bytes, default 64   
  208. [    0.257395] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available  
  209. [    0.257811] kvm [1]: IPA Size Limit: 40bits
  210. [    0.258892] kvm [1]: vgic interrupt IRQ1   
  211. [    0.259075] kvm [1]: Hyp mode initialized successfully
  212. [    0.270955] Initialise system trusted keyrings   
  213. [    0.271320] workingset: timestamp_bits=44 max_order=19 bucket_order=0   
  214. [    0.283040] squashfs: version 4.0 (2009/01/31) Phillip Lougher     
  215. [    0.284375] NFS: Registering the id_resolver key type  
  216. [    0.284445] Key type id_resolver registered
  217. [    0.284464] Key type id_legacy registered  
  218. [    0.284494] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  219. [    0.284808] 9p: Installing v9fs 9p2000 file system support   
  220. [    0.311005] Key type asymmetric registered
  221. [    0.311049] Asymmetric key parser 'x509' registered   
  222. [    0.311149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)     
  223. [    0.311180] io scheduler mq-deadline registered  
  224. [    0.311200] io scheduler kyber registered  
  225. [    0.318293] EINJ: ACPI disabled.     
  226. [    0.320971] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
  227. [    0.321021] dma-pl330 ff1f0000.dmac:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16   
  228. [    0.326758] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  229. [    0.329447] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A
  230. [    0.403168] printk: console [ttyS2] enabled
  231.    
  232. [    0.410874] rockchip-vop ff370000.vop: Adding to iommu group 1     
  233. [    0.412255] dw_hdmi_rockchip dw_hdmi_rockchip_probe: component_add
  234. [    0.413151] rockchip_drm_drv: rockchip_drm_init:platform_driver_register
  235. [    0.417246] rockchip-drm display-subsystem: bound ff370000.vop (ops vop_component_ops)     

  237. [    0.425304] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)  

  239. [    0.427531] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
  240.    
  241. [    0.429440] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops dw_hdmi_rockchip_ops)
  242. [    0.430190] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).  
  243. [    0.430862] [drm] No driver support for vblank timestamp query.   

  245. [    1.286453] ------------[ cut here ]------------
  246. [    1.286459] [CRTC:35:crtc-0] vblank wait timed out     
  247. [    1.286544] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_atomic_helper.c:1463 drm_atomic_helper_wait_for_vblanks.part.27+0x2d0/0x2d8
  248. [    1.286548] Modules linked in:
  249. [    1.286564] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.5.0 #7     
  250. [    1.286569] Hardware name: Firefly roc-rk3328-cc (DT)  
  251. [    1.286577] pstate: 60000005 (nZCv daif -PAN -UAO)     
  252. [    1.286586] pc : drm_atomic_helper_wait_for_vblanks.part.27+0x2d0/0x2d8  
  253. [    1.286595] lr : drm_atomic_helper_wait_for_vblanks.part.27+0x2d0/0x2d8  
  254. [    1.286599] sp : ffff80001002b470   
  255. [    1.286603] x29: ffff80001002b470 x28: 0000000000000000
  256. [    1.286611] x27: ffff800010e87fd8 x26: 0000000000000001
  257. [    1.286618] x25: ffff800010e88048 x24: ffff00007a9fd500
  258. [    1.286626] x23: ffff00007a503800 x22: ffff800011249000
  259. [    1.286636] x21: ffff00007d32a080 x20: 0000000000000000
  260. [    1.286643] x19: 0000000000000000 x18: ffffffffffffffff
  261. [    1.286651] x17: 0000000000000001 x16: 0000000010624dd3
  262. [    1.286658] x15: ffff8000112498c8 x14: 00000000fffffff0
  263. [    1.286666] x13: ffff800011317008 x12: ffff800011261438
  264. [    1.286674] x11: ffff800011261000 x10: ffff800011316000
  265. [    1.286681] x9 : 0000000000000000 x8 : ffff800011316b98
  266. [    1.286688] x7 : 0000000000000000 x6 : 0000000006974929
  267. [    1.286695] x5 : 0000000000000000 x4 : 0000000000000000
  268. [    1.286702] x3 : 00000000ffffffff x2 : ffff8000112614b8
  269. [    1.286710] x1 : e036ae57baad5500 x0 : 0000000000000000
  270. [    1.286718] Call trace:  
  271. [    1.286729]  drm_atomic_helper_wait_for_vblanks.part.27+0x2d0/0x2d8
  272. [    1.286737]  drm_atomic_helper_commit_tail_rpm+0x60/0x78     
  273. [    1.286745]  commit_tail+0x9c/0x170  
  274. [    1.286753]  drm_atomic_helper_commit+0x168/0x180
  275. [    1.286763]  drm_atomic_commit+0x48/0x58   
  276. [    1.286773]  drm_client_modeset_commit_atomic.isra.16+0x174/0x228  
  277. [    1.286779]  drm_client_modeset_commit_force+0x60/0x198
  278. [    1.286788]  drm_fb_helper_restore_fbdev_mode_unlocked+0x70/0xc8   
  279. [    1.286795]  drm_fb_helper_set_par+0x2c/0x60     
  280. [    1.286804]  fbcon_init+0x4e0/0x570  
  281. [    1.286813]  visual_init+0xb0/0x108  
  282. [    1.286821]  do_bind_con_driver+0x1d4/0x3c8
  283. [    1.286829]  do_take_over_console+0x148/0x1d8   
  284. [    1.286838]  do_fbcon_takeover+0x6c/0xe8   
  285. [    1.286844]  fbcon_fb_registered+0x13c/0x150     
  286. [    1.286852]  register_framebuffer+0x1c4/0x338   
  287. [    1.286860]  __drm_fb_helper_initial_config_and_unlock+0x2cc/0x478
  288. [    1.286868]  drm_fb_helper_initial_config+0x40/0x50   
  289. [    1.286877]  rockchip_drm_fbdev_init+0x5c/0x100  
  290. [    1.286883]  rockchip_drm_bind+0x174/0x1c8
  291. [    1.286894]  try_to_bring_up_master+0x15c/0x1c0  
  292. [    1.286903]  component_master_add_with_match+0xc0/0x108
  293. [    1.286910]  rockchip_drm_platform_probe+0x1ac/0x2c0   
  294. [    1.286917]  platform_drv_probe+0x50/0xa8  
  295. [    1.286927]  really_probe+0x108/0x360
  296. [    1.286935]  driver_probe_device+0x58/0x100
  297. [    1.286943]  device_driver_attach+0x6c/0x78
  298. [    1.286951]  __driver_attach+0xb0/0xf0     
  299. [    1.286958]  bus_for_each_dev+0x68/0xc8   
  300. [    1.286966]  driver_attach+0x20/0x28
  301. [    1.286973]  bus_add_driver+0x160/0x1f0   
  302. [    1.286981]  driver_register+0x60/0x110   
  303. [    1.286987]  __platform_driver_register+0x40/0x48
  304. [    1.286997]  rockchip_drm_init+0x1b0/0x1d8
  305. [    1.287006]  do_one_initcall+0x58/0x1a0   
  306. [    1.287015]  kernel_init_freeable+0x19c/0x20c   
  307. [    1.287027]  kernel_init+0x10/0x108  
  308. [    1.287034]  ret_from_fork+0x10/0x1c
  309. [    1.287047] ---[ end trace eaf638c6bba5cc86 ]---
复制代码


回复

使用道具 举报

下一页 »
返回列表
12
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

  •  
Copyright © 2014 Firefly. All Rights Reserved.    
联系我们
技术支持 ： service@t-firefly.com
商务联系 ： sales@t-firefly.com
国内销售经理 ： (+86)13790717706
国内销售经理 ： (+86)16676054231
国外销售经理 ： (+86)15521814828
技术支持
综合支持  ： service@t-firefly.com
MiniPC (①群)  ： 431139193 (已满)
MiniPC (②群)  ： 586343230 (已满)
MiniPC (③群)  ： 708441069 (已满)
MiniPC (④群)  ： 902769718 (已满)
MiniPC (⑤群)  ： 680300610
友情链接 ： 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表