Firefly开源社区

打印 上一主题 下一主题

[硬件交流] 急,急,急,AIO-3399C开发板换了一颗emmc,然后固件跑一半没起来

36

积分

0

威望

0

贡献

技术小白

积分
36

急,急,急,AIO-3399C开发板换了一颗emmc,然后固件跑一半没起来

发表于 2020-11-14 12:52:31      浏览:6667 | 回复:2        打印      只看该作者   [复制链接] 楼主
本想给AIO3399开发板换一颗32G的emmc,刷完固件后却跑不起来,然后换了一颗和开发板一样的KLMAG1JETD-B041 emmc,却怎么也跑不起来,总是到一半就卡住了。换emmc后需要对emmc做什么操作才能刷固件吗




开机log如下:




DDR Version 1.23 20190709
In
channel 0
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
OUT
Boot1: 2018-08-06, version: 1.15
CPUId = 0x0
ChipType = 0x10, 223
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67768
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT 0x3190d20 signature is wrong
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x84184
RunBL31 0x10000
NOTICE:  BL31: v1.3(debug):22b599a
NOTICE:  BL31: Built : 11:03:32, Jul 10 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1181): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec  7 06:11:20 UTC 2018 aarch64)


INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2


INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9




U-Boot 2014.10-RK3399-06 (May 06 2020 - 16:46:32)


CPU: rk3399
cpu version = 0
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 800000000HZ
               aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
               aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
               hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    cpll = 800000000HZ
    dpll = 856000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
Board:        Rockchip platform Board
Uboot as second level loader
DRAM:  Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment


GetParam
Load FDT from resource image.
power key: bank-0 pin-5
can't find dts node for fixed
usb bc: can find node by path: /dwc-control-usb/usb_bc
dwc_otg_check_dpdm: usb bc disconnected
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=60
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 800000000HZ
               aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
               aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
               hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    cpll = 800000000HZ
    dpll = 856000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
invalide header tag
ca head not found
SecureBootEn = 0, SecureBootLock = 0


#Boot ver: 0000-00-00#0.00
empty serial no.
normal boot.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
Rockchip UBOOT DRM driver version: develop-v1.0.0
failed to find panel driver
read logo on state from dts [1]
no fuel gauge found
rockchip_panel_deinit: failed to find panel deinit funcs
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
failed to display kernel logo
got recovery cmd from misc.
load fdt from resouce.
hwversion: disabled!
Secure Boot state: 0
kernel   @ 0x00280000 (0x0133e008)
ramdisk  @ 0x04bf0000 (0x007552f0)
bootrk: do_bootm_linux...
   Loading Device Tree to 0000000004600000, end 0000000004616bfd ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:000000000a200000, 0000000075e00000
WARNING: could not set reg FDT_ERR_BADOFFSET.


Starting kernel ...


[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Initializing cgroup subsys schedtune
[    0.000000] Linux version 4.4.126 (chengd@tchipserver2) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #24 SMP PREEMPT Thu Apr 16 14:41:25 CST 2020
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef8000 s45528 r8192 d32296 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 507912
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00020000@0x0002C000(recovery),0x00038000@0x0004C000(backup),0x00040000@0x00084000(cache),0x00300000@0x000C4000(system),0x00100000@0x003C4000(oem),0x00008000@0x004C4000(metadata),0x00000040@0x004CC000(verity_mode),0x00002000@0x004CC040(reserved),0x00000400@0x004CE040(frp),-@0x004CE440(userdata) storagemedia=emmc androidboot.oem_unlocked=0 uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2020-05-06_16:46:32 SecureBootCheckOk=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB [mem 0x7eeb0000-0x7eef0000] (0MB) mapped at [ffffffc07eeb0000-ffffffc07eeeffff]
[    0.000000] Memory: 1981812K/2064384K available (11390K kernel code, 1720K rwdata, 5716K rodata, 832K init, 1137K bss, 66188K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009140000 - 0xffffff8009210000   (   832 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008ba0000   ( 11392 KB)
[    0.000000]     .rodata : 0xffffff8008ba0000 - 0xffffff8009140000   (  5760 KB)
[    0.000000]       .data : 0xffffff8009210000 - 0xffffff80093be008   (  1721 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]         Build-time adjustment of leaf fanout to 64.
[    0.000000]         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x000000000a280000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x000000000a290000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001946] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.002933] pid_max: default: 32768 minimum: 301
[    0.003438] Security Framework initialized
[    0.003836] SELinux:  Initializing.
[    0.004280] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.004924] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.006401] Initializing cgroup subsys memory
[    0.006842] Initializing cgroup subsys freezer
[    0.008180] sched-energy: Sched-energy-costs installed from DT
[    0.008743] CPU0: update cpu_capacity 401
[    0.009205] ASID allocator initialised with 32768 entries
[    0.026041] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.027342] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.039450] Detected VIPT I-cache on CPU1
[    0.039484] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.039518] CPU1: using LPI pending table @0x000000000a3f0000
[    0.039561] CPU1: update cpu_capacity 401
[    0.039565] CPU1: Booted secondary processor [410fd034]
[    0.049427] Detected VIPT I-cache on CPU2
[    0.049447] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.049479] CPU2: using LPI pending table @0x000000007c020000
[    0.049508] CPU2: update cpu_capacity 401
[    0.049511] CPU2: Booted secondary processor [410fd034]
[    0.059458] Detected VIPT I-cache on CPU3
[    0.059477] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.059509] CPU3: using LPI pending table @0x000000007c060000
[    0.059534] CPU3: update cpu_capacity 401
[    0.059538] CPU3: Booted secondary processor [410fd034]
[    0.069508] Detected PIPT I-cache on CPU4
[    0.069534] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.069573] CPU4: using LPI pending table @0x000000007c0b0000
[    0.069613] CPU4: update cpu_capacity 1024
[    0.069616] CPU4: Booted secondary processor [410fd082]
[    0.079531] Detected PIPT I-cache on CPU5
[    0.079548] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.079584] CPU5: using LPI pending table @0x000000007c0e0000
[    0.079611] CPU5: update cpu_capacity 1024
[    0.079614] CPU5: Booted secondary processor [410fd082]
[    0.079699] Brought up 6 CPUs
[    0.092097] SMP: Total of 6 processors activated.
[    0.092551] CPU features: detected feature: GIC system register CPU interface
[    0.093239] CPU: All CPU(s) started at EL2
[    0.093673] alternatives: patching kernel code
[    0.096059] devtmpfs: initialized
[    0.117123] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.118048] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.119355] pinctrl core: initialized pinctrl subsystem
[    0.121426] Failed to find legacy iommu devices
[    0.122222] NET: Registered protocol family 16
[    0.123064] schedtune: init normalization constants...
[    0.123568] schedtune: CLUSTER[0-3]      min_pwr:    56 max_pwr:   222
[    0.124183] schedtune: CPU[0]            min_pwr:     0 max_pwr:   222
[    0.124793] schedtune: CPU[1]            min_pwr:     0 max_pwr:   222
[    0.125402] schedtune: CPU[2]            min_pwr:     0 max_pwr:   222
[    0.126009] schedtune: CPU[3]            min_pwr:     0 max_pwr:   222
[    0.126618] schedtune: CLUSTER[4-5]      min_pwr:    65 max_pwr:  1108
[    0.127232] schedtune: CPU[4]            min_pwr:     0 max_pwr:  1108
[    0.127843] schedtune: CPU[5]            min_pwr:     0 max_pwr:  1108
[    0.128456] schedtune: SYSTEM            min_pwr:   121 max_pwr:  4434
[    0.129070] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
[    0.129785] schedtune: verify normalization constants...
[    0.130284] schedtune: max_pwr/2^0: 4313 => norm_pwr:  1024
[    0.130810] schedtune: max_pwr/2^1: 2156 => norm_pwr:   511
[    0.131332] schedtune: max_pwr/2^2: 1078 => norm_pwr:   255
[    0.131856] schedtune: max_pwr/2^3:  539 => norm_pwr:   127
[    0.132378] schedtune: max_pwr/2^4:  269 => norm_pwr:    63
[    0.132899] schedtune: max_pwr/2^5:  134 => norm_pwr:    31
[    0.133421] schedtune: configured to support 5 boost groups
[    0.144187] cpuidle: using governor ladder
[    0.154186] cpuidle: using governor menu
[    0.154570] Registered FIQ tty driver
[    0.155299] vdso: 2 pages (1 code @ ffffff8008ba6000, 1 data @ ffffff8009214000)
[    0.156015] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.157706] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.178670] console [pstore-1] enabled
[    0.179264] pstore: Registered ramoops as persistent store backend
[    0.179847] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.183003] fiq debugger fiq mode enabled
[ [    0.183633] console [ttyFIQ0] enabled
   0.183633] console [ttyFIQ0] enabled
[    0.184318] bootconsole [uart0] disabled
[    0.184318] bootconsole [uart0] disabled
[    0.184876] Registered fiq debugger ttyFIQ0
[    0.218900] iommu: Adding device ff650000.vpu_service to group 0
[    0.218977] iommu: Adding device ff660000.rkvdec to group 1
[    0.219046] iommu: Adding device ff670000.iep to group 2
[    0.219139] iommu: Adding device ff8f0000.vop to group 3
[    0.219209] iommu: Adding device ff900000.vop to group 4
[    0.219313] iommu: Adding device ff910000.isp to group 5
[    0.219385] iommu: Adding device ff920000.isp to group 6
[    0.220098] rk_iommu ff670800.iommu: can't get aclk
[    0.220112] rk_iommu ff670800.iommu: can't get hclk
[    0.220977] SCSI subsystem initialized
[    0.221307] usbcore: registered new interface driver usbfs
[    0.221353] usbcore: registered new interface driver hub
[    0.221430] usbcore: registered new device driver usb
[    0.221805] media: Linux media interface: v0.10
[    0.221840] Linux video capture interface: v2.00
[    0.222006] pps_core: LinuxPPS API ver. 1 registered
[    0.222015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.222037] PTP clock support registered
[    0.223708] Advanced Linux Sound Architecture Driver Initialized.
[    0.224237] Bluetooth: Core ver 2.21
[    0.224270] NET: Registered protocol family 31
[    0.224278] Bluetooth: HCI device and connection manager initialized
[    0.224292] Bluetooth: HCI socket layer initialized
[    0.224304] Bluetooth: L2CAP socket layer initialized
[    0.224330] Bluetooth: SCO socket layer initialized
[    0.225099] rockchip-cpuinfo cpuinfo: Serial                : d46f4da18d7efaa0
[    0.225658] clocksource: Switched to clocksource arch_sys_counter
[    0.270600] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.270837] NET: Registered protocol family 2
[    0.271282] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.271425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.271698] TCP: Hash tables configured (established 16384 bind 16384)
[    0.271777] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.271835] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.272014] NET: Registered protocol family 1
[    0.272940] Trying to unpack rootfs image as initramfs...
[    0.604475] Freeing initrd memory: 7508K
[    0.605083] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.605171] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.608044] audit: initializing netlink subsys (disabled)
[    0.608116] audit: type=2000 audit(0.603:1): initialized
[    0.613328] VFS: Disk quotas dquot_6.6.0
[    0.613460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.614504] Registering sdcardfs 0.1
[    0.615089] fuse init (API version 7.23)
[    0.616210]
[    0.616210] TEE Core Framework initialization (ver 1:0.1)
[    0.616237] TEE armv7 Driver initialization
[    0.616627] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    0.616644] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    0.616824] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    0.620829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.620851] io scheduler noop registered
[    0.621014] io scheduler cfq registered (default)
[    0.622287] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator
[    0.625375] ace test_init function.
[    0.625523] ace test_init end.ret=0
[    0.625835] radar end.ret=0
[    0.627757] iep: failed to find iep power down clock source.
[    0.628108] IEP Power ON
[    0.628274] IEP Power OFF
[    0.628343] IEP Driver loaded succesfully
[    0.628462] Module initialized.
[    0.628734] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    0.628951] rk-vcodec ff650000.vpu_service: probe device
[    0.629139] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    0.629651] rk-vcodec ff650000.vpu_service: could not find power_model node
[    0.629667] rk-vcodec ff650000.vpu_service: init success
[    0.629867] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    0.630303] rk-vcodec ff660000.rkvdec: probe device
[    0.630467] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    0.630847] rk-vcodec ff660000.rkvdec: could not find power_model node
[    0.630859] rk-vcodec ff660000.rkvdec: init success
[    0.632532] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.632549] dma-pl330 ff6d0000.dma-controller:         DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.633916] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.633934] dma-pl330 ff6e0000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.635813] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.636377] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[    0.636818] [drm] Initialized drm 1.1.0 20060810
[    0.640510] [drm] Rockchip DRM driver version: v1.0.0
[    0.642836] mali ff9a0000.gpu: Failed to get regulator
[    0.642853] mali ff9a0000.gpu: Power control initialization failed
[    0.643149] Unable to detect cache hierarchy for CPU 0
[    0.651229] brd: module loaded
[    0.656313] loop: module loaded
[    0.656838] zram: Added device: zram0
[    0.657559] Loading dl1825 driver
[    0.657794] SCSI Media Changer driver v0.25
[    0.658678] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[    0.658697] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[    0.658707] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    0.659533] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max
[    0.829880] wk2xxx_probe()  GENA = 0xFF
[    0.829893] spi driver  error!!!!
[    0.829920] wk2xxxspi: probe of spi32766.0 failed with error 1
[    0.829948] register spi return v = :0
[    0.830023] register firefly_spi_init spi return v = :0
[    0.830080] tun: Universal TUN/TAP device driver, 1.6
[    0.830087] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.831013] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    0.831107] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    0.831124] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2b).
[    0.831135] rk_gmac-dwmac fe300000.ethernet: RX delay(0x23).
[    0.831164] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    0.831330] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    0.831339] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    0.836354] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    0.836482] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.836493]  Ring mode enabled
[    0.836500]  DMA HW capability register supported
[    0.836507]  Normal descriptors
[    0.836517]  RX Checksum Offload Engine supported (type 2)
[    0.836523]  Wake-Up On Lan supported
[    0.836562]  Enable RX Mitigation via HW Watchdog Timer
[    0.904996] libphy: stmmac: probed
[    0.905038] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    0.905048] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    0.906008] PPP generic driver version 2.4.2
[    0.906273] PPP BSD Compression module registered
[    0.906334] PPP Deflate Compression module registered
[    0.906375] PPP MPPE Compression module registered
[    0.906431] NET: Registered protocol family 24
[    0.906502] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    0.906511] CSLIP: code copyright 1989 Regents of the University of California.
[    0.906651] usbcore: registered new interface driver mt7601u
[    0.906696] Rockchip WiFi SYS interface (V1.00) ...
[    0.906799] usbcore: registered new interface driver catc
[    0.906859] usbcore: registered new interface driver kaweth
[    0.906899] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    0.906950] usbcore: registered new interface driver pegasus
[    0.907012] usbcore: registered new interface driver rtl8150
[    0.907075] usbcore: registered new interface driver r8152
[    0.907114] hso: drivers/net/usb/hso.c: Option Wireless
[    0.907192] usbcore: registered new interface driver hso
[    0.907258] usbcore: registered new interface driver asix
[    0.907316] usbcore: registered new interface driver ax88179_178a
[    0.907400] usbcore: registered new interface driver cdc_ether
[    0.907457] usbcore: registered new interface driver cdc_eem
[    0.907519] usbcore: registered new interface driver dm9601
[    0.907610] usbcore: registered new interface driver smsc75xx
[    0.907679] usbcore: registered new interface driver smsc95xx
[    0.907743] usbcore: registered new interface driver gl620a
[    0.907823] usbcore: registered new interface driver net1080
[    0.907880] usbcore: registered new interface driver plusb
[    0.907945] usbcore: registered new interface driver rndis_host
[    0.908025] usbcore: registered new interface driver cdc_subset
[    0.908085] usbcore: registered new interface driver zaurus
[    0.908146] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.908228] usbcore: registered new interface driver int51x1
[    0.908306] usbcore: registered new interface driver kalmia
[    0.908364] usbcore: registered new interface driver ipheth
[    0.908424] usbcore: registered new interface driver sierra_net
[    0.908507] usbcore: registered new interface driver cx82310_eth
[    0.908574] usbcore: registered new interface driver cdc_ncm
[    0.908634] usbcore: registered new interface driver qmi_wwan
[    0.908714] usbcore: registered new interface driver cdc_mbim
[    0.910826] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[    0.915767] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[    0.916968] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.916989] ehci-pci: EHCI PCI platform driver
[    0.917053] ehci-platform: EHCI generic platform driver
[    0.920885] ehci-platform fe3c0000.usb: EHCI Host Controller
[    0.921102] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    0.921287] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    0.929034] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    0.929254] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.929279] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.929293] usb usb1: Product: EHCI Host Controller
[    0.929306] usb usb1: Manufacturer: Linux 4.4.126 ehci_hcd
[    0.929318] usb usb1: SerialNumber: fe3c0000.usb
[    0.930008] hub 1-0:1.0: USB hub found
[    0.930060] hub 1-0:1.0: 1 port detected
[    0.931023] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.931076] ohci-platform: OHCI generic platform driver
[    0.931747] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    0.931970] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    0.932185] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    0.986489] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.986525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.986535] usb usb2: Product: Generic Platform OHCI controller
[    0.986545] usb usb2: Manufacturer: Linux 4.4.126 ohci_hcd
[    0.986555] usb usb2: SerialNumber: fe3e0000.usb
[    0.987235] hub 2-0:1.0: USB hub found
[    0.987362] hub 2-0:1.0: 1 port detected
[    0.989174] usbcore: registered new interface driver cdc_acm
[    0.989194] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.989282] usbcore: registered new interface driver usblp
[    0.989355] usbcore: registered new interface driver cdc_wdm
[    0.989424] usbcore: registered new interface driver uas
[    0.989531] usbcore: registered new interface driver usb-storage
[    0.989596] usbcore: registered new interface driver ums-alauda
[    0.989657] usbcore: registered new interface driver ums-cypress
[    0.989720] usbcore: registered new interface driver ums-datafab
[    0.989785] usbcore: registered new interface driver ums_eneub6250
[    0.989840] usbcore: registered new interface driver ums-freecom
[    0.989897] usbcore: registered new interface driver ums-isd200
[    0.989957] usbcore: registered new interface driver ums-jumpshot
[    0.990019] usbcore: registered new interface driver ums-karma
[    0.990075] usbcore: registered new interface driver ums-onetouch
[    0.990140] usbcore: registered new interface driver ums-sddr09
[    0.990199] usbcore: registered new interface driver ums-sddr55
[    0.990255] usbcore: registered new interface driver ums-usbat
[    0.990373] usbcore: registered new interface driver usbserial
[    0.990433] usbcore: registered new interface driver usbserial_generic
[    0.990471] usbserial: USB Serial support registered for generic
[    0.990529] usbcore: registered new interface driver option
[    0.990569] usbserial: USB Serial support registered for GSM modem (1-port)
[    0.990737] usbcore: registered new interface driver trancevibrator
[    0.990764] usb20_otg: version 3.10a 21-DEC-2012
[    0.991075] usb20_host: version 3.10a 21-DEC-2012
[    0.991808] usbcore: registered new interface driver xpad
[    0.991866] usbcore: registered new interface driver usb_acecad
[    0.991910] usbcore: registered new interface driver aiptek
[    0.991953] usbcore: registered new interface driver gtco
[    0.991996] usbcore: registered new interface driver hanwang
[    0.992040] usbcore: registered new interface driver kbtab
[    0.992603] .. rk pwm remotectl v1.1 init
[    0.992836] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    0.993287] sensor_register_slave:mma8452,id=17
[    0.993305] sensor_register_slave:lis3dh,id=7
[    0.993317] sensor_register_slave:mma7660,id=18
[    0.993329] sensor_register_slave:lsm303d,id=22
[    0.993340] sensor_register_slave:gs_mc3230,id=23
[    0.993347] [Gsensor]   gsensor_init
[    0.993359] sensor_register_slave:mpu6880_acc,id=24
[    0.993369] sensor_register_slave:mpu6500_acc,id=25
[    0.993388] sensor_register_slave:lsm330_acc,id=26
[    0.993399] sensor_register_slave:bma2xx_acc,id=27
[    0.993411] sensor_register_slave:akm8975,id=30
[    0.993422] sensor_register_slave:akm8963,id=31
[    0.993433] sensor_register_slave:l3g4200d,id=45
[    0.993444] sensor_register_slave:l3g20d,id=46
[    0.993455] sensor_register_slave:ewtsa,id=47
[    0.993466] sensor_register_slave:lsm330_gyro,id=51
[    0.993477] sensor_register_slave:cm3217,id=53
[    0.993487] sensor_register_slave:cm3218,id=54
[    0.993499] sensor_register_slave:ls_stk3410,id=62
[    0.993510] sensor_register_slave:ps_stk3410,id=67
[    0.994304] i2c /dev entries driver
[    0.995466] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    0.995551] fan53555-reg: supplied by vcc5v0_sys
[    0.997934] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    0.997994] fan53555-reg: supplied by vcc5v0_sys
[    0.999996] rockchip-pinctrl pinctrl: pin gpio1-18 already requested by 0-0040; cannot claim for 0-001b
[    1.000025] rockchip-pinctrl pinctrl: pin-50 (0-001b) status -22
[    1.000037] rockchip-pinctrl pinctrl: could not request pin 50 (gpio1-18) from group pmic-dvs2  on device rockchip-pinctrl
[    1.000046] rk808 0-001b: Error applying setting, reverse things back
[    1.000453] rk808 0-001b: Pmic Chip id: 0x0
[    1.003728] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.003806] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.003890] DCDC_REG1: supplied by vcc3v3_sys
[    1.004628] DCDC_REG2: supplied by vcc3v3_sys
[    1.005189] DCDC_REG3: supplied by vcc3v3_sys
[    1.005455] DCDC_REG4: supplied by vcc3v3_sys
[    1.005928] LDO_REG1: supplied by vcc3v3_sys
[    1.007046] LDO_REG2: supplied by vcc3v3_sys
[    1.008032] LDO_REG3: supplied by vcc3v3_sys
[    1.009042] LDO_REG4: supplied by vcc3v3_sys
[    1.009876] vcc_sd: Failed to create debugfs directory
[    1.009979] LDO_REG5: supplied by vcc3v3_sys
[    1.010967] LDO_REG6: supplied by vcc3v3_sys
[    1.011939] LDO_REG7: supplied by vcc3v3_sys
[    1.012933] LDO_REG8: supplied by vcc3v3_sys
[    1.013925] SWITCH_REG1: supplied by vcc3v3_sys
[    1.014205] SWITCH_REG2: supplied by vcc3v3_sys
[    1.014605] firefly_hwversion_in_range  茺{
回复

使用道具 举报

36

积分

0

威望

0

贡献

技术小白

积分
36
发表于 2020-11-14 12:54:50        只看该作者  沙发
[    1.017741] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.018269] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80097fc000
[    1.018881] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80097fe000
[    1.019447] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80098d2000
[    1.020622] fusb302 4-0022: Can't get property of role, set role to default DRP
[    1.023916] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[    1.024092] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input1
[    1.024273] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80098d4000
[    1.025174] IR NEC protocol handler initialized
[    1.025203] IR RC5(x/sz) protocol handler initialized
[    1.025216] IR RC6 protocol handler initialized
[    1.025229] IR JVC protocol handler initialized
[    1.025243] IR Sony protocol handler initialized
[    1.025255] IR SANYO protocol handler initialized
[    1.025268] IR Sharp protocol handler initialized
[    1.025281] IR MCE Keyboard/mouse protocol handler initialized
[    1.025295] IR XMP protocol handler initialized
[    1.025488] usbcore: registered new interface driver uvcvideo
[    1.025510] USB Video Class driver (1.1.1)
[    1.025527] CamSys driver version: v0.41.0, CamSys head file version: v1.0.0
[    1.029870] __power_supply_register: Expected proper parent device for 'test_ac'
[    1.030001] __power_supply_register: Expected proper parent device for 'test_battery'
[    1.030270] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.030384] __power_supply_register: Expected proper parent device for 'test_usb'
[    1.032792] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    1.033496] device-mapper: uevent: version 1.0.3
[    1.033825] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.033999] Bluetooth: HCI UART driver ver 2.3
[    1.034014] Bluetooth: HCI UART protocol H4 registered
[    1.034023] Bluetooth: HCI UART protocol LL registered
[    1.034034] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
[    1.034042] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
[    1.034049] rtk_btusb: Register usb char device interface for BT driver
[    1.034247] usbcore: registered new interface driver rtk_btusb
[    1.034643] cpu cpu0: bin=1
[    1.034700] cpu cpu0: leakage=24
[    1.046395] cpu cpu0: temp=40000, pvtm=152542 (152657 + -115)
[    1.046636] cpu cpu0: pvtm-volt-sel=3
[    1.046701] cpu cpu0: bin-scale=34
[    1.046978] cpu cpu4: bin=1
[    1.047035] cpu cpu4: leakage=41
[    1.059131] cpu cpu4: temp=40000, pvtm=157739 (157810 + -71)
[    1.059308] cpu cpu4: pvtm-volt-sel=2
[    1.059370] cpu cpu4: bin-scale=17
[    1.060402] cpu cpu0: avs=0, target-scale=34
[    1.060496] cpu cpu0: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    1.061803] cpu cpu4: avs=0, target-scale=17
[    1.061896] cpu cpu4: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    1.063930] sdhci: Secure Digital Host Controller Interface driver
[    1.063954] sdhci: Copyright(c) Pierre Ossman
[    1.063966] Synopsys Designware Multimedia Card Interface Driver
[    1.064804] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.064974] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.064993] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.065048] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.065095] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.065137] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.065146] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.065949] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.066022] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.066053] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.066092] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    1.066110] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.066520] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.066676] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.079264] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.093554] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    1.094082] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.096253] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    1.096293] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    1.125781] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    1.129718] hidraw: raw HID events driver (C) Jiri Kosina
[    1.133278] usbcore: registered new interface driver usbhid
[    1.133299] usbhid: USB HID core driver
[    1.133494] inv_mpu_iio: inv_mpu_init:746
[    1.134574] ashmem: initialized
[    1.136656] rockchip-dmc dmc: unable to get devfreq-event device : dfi
[    1.143394] rknandbase v1.1 2016-11-08
[    1.144371] usbcore: registered new interface driver snd-usb-audio
[    1.145847] rt5640 1-001c: rt5640 have no io-channels defined
[    1.145873] rt5640 1-001c: rt5640 have no aux_det_adc_value defined
[    1.156529] rockchip-pinctrl pinctrl: pin gpio3-28 already requested by pinctrl; cannot claim for ff880000.i2s
[    1.156576] rockchip-pinctrl pinctrl: pin-124 (ff880000.i2s) status -22
[    1.156591] rockchip-pinctrl pinctrl: could not request pin 124 (gpio3-28) from group i2s0-8ch-bus  on device rockchip-pinctrl
[    1.156606] rockchip-i2s ff880000.i2s: Error applying setting, reverse things back
[    1.161759] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
[    1.161813] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
[    1.162060] u32 classifier
[    1.162093]     Actions configured
[    1.162155] Netfilter messages via NETLINK v0.30.
[    1.162260] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.162801] ctnetlink v0.93: registering with nfnetlink.
[    1.163879] xt_time: kernel timezone is -0000
[    1.165211] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.165501] arp_tables: (C) 2002 David S. Miller
[    1.166294] Initializing XFRM netlink socket
[    1.166810] mmc1: MAN_BKOPS_EN bit is not set
[    1.166950] NET: Registered protocol family 10
[    1.168389] mip6: Mobile IPv6
[    1.168440] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.171266] sit: IPv6 over IPv4 tunneling driver
[    1.171941] NET: Registered protocol family 17
[    1.172007] NET: Registered protocol family 15
[    1.172063] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.173577] Bridge firewalling registered
[    1.173610] Ebtables v2.0 registered
[    1.173992] Bluetooth: RFCOMM TTY layer initialized
[    1.174025] Bluetooth: RFCOMM socket layer initialized
[    1.174066] Bluetooth: RFCOMM ver 1.11
[    1.174087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.174096] Bluetooth: BNEP filters: protocol multicast
[    1.174134] Bluetooth: BNEP socket layer initialized
[    1.174149] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.174160] Bluetooth: HIDP socket layer initialized
[    1.174231] l2tp_core: L2TP core driver, V2.0
[    1.174252] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.174267] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.174803] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.174897] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6255
[    1.174923] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.174931] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.175024] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    1.175033] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.175045] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.175111] [BT_RFKILL]: Enter rfkill_rk_init
[    1.175801] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    1.175876] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    1.175908] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    1.175939] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    1.176328] [BT_RFKILL]: Request irq for bt wakeup host
[    1.176401] [BT_RFKILL]: ** disable irq
[    1.176579] [BT_RFKILL]: bt_default device registered.
[    1.176877] sensor_register_slave:mpu6500_gyro,id=49
[    1.176899] sensor_register_slave:mpu6880_gyro,id=50
[    1.178574] Registered cp15_barrier emulation handler
[    1.178682] Registered setend emulation handler
[    1.179041] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    1.179596] registered taskstats version 1
[    1.179832] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[    1.180278] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[    1.180516] rockchip ion idev is NULL
[    1.180537] rga2 ff680000.rga: rga ion client create success!
[    1.180694] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[    1.180811] rga: Driver loaded successfully ver:3.02
[    1.181075] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[    1.181532]  parameter: 0x000000000 -- 0x000400000 (4 MB)
[    1.181550]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    1.181559]      trust: 0x000800000 -- 0x000c00000 (4 MB)
[    1.181568]       misc: 0x000c00000 -- 0x001000000 (4 MB)
[    1.181578]   resource: 0x001000000 -- 0x002000000 (16 MB)
[    1.181587]     kernel: 0x002000000 -- 0x003800000 (24 MB)
[    1.181596]       boot: 0x003800000 -- 0x005800000 (32 MB)
[    1.181606]   recovery: 0x005800000 -- 0x009800000 (64 MB)
[    1.181615]     backup: 0x009800000 -- 0x010800000 (112 MB)
[    1.181625]      cache: 0x010800000 -- 0x018800000 (128 MB)
[    1.181634]     system: 0x018800000 -- 0x078800000 (1536 MB)
[    1.181643]        oem: 0x078800000 -- 0x098800000 (512 MB)
[    1.181652]   metadata: 0x098800000 -- 0x099800000 (16 MB)
[    1.181662] verity_mode: 0x099800000 -- 0x099808000 (0 MB)
[    1.181670]   reserved: 0x099808000 -- 0x099c08000 (4 MB)
[    1.181680]        frp: 0x099c08000 -- 0x099c88000 (0 MB)
[    1.181689]   userdata: 0x099c88000 -- 0x3a3a00000 (12445 MB)
[    1.181764]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
[    1.182153] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator
[    1.185003] rockchip-drm display-subsystem: defer getting devfreq
[    1.185409] rockchip-vop ff900000.vop: missing rockchip,grf property
[    1.185768] rockchip-vop ff900000.vop: unable to request PWM
[    1.185801] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[    1.185864] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    1.186072] rockchip-vop ff8f0000.vop: unable to request PWM
[    1.186097] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[    1.186624] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    1.186677] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.186809] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.188647] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[    1.189260] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
[    1.189840] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[    1.189901] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)
[    1.189917] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.189926] [drm] No driver support for vblank timestamp query.
[    1.190269] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
[    1.190302] rockchip-drm display-subsystem: can't not find any loader display
[    1.190338] rockchip-drm display-subsystem: failed to show loader logo
[    1.190444] Freeing drm_logo memory: 488K
[    1.190462] rockchip-drm display-subsystem: No connectors reported connected with modes
[    1.190473] [drm] Cannot find any crtc or sizes - going 1024x768
[    1.197598] rockchip-drm display-subsystem: fb0:  frame buffer device
[    1.215133] mali ff9a0000.gpu: leakage=33
[    1.228529] mali ff9a0000.gpu: temp=39375, pvtm=126660 (126752 + -92)
[    1.230341] mali ff9a0000.gpu: pvtm-volt-sel=2
[    1.232711] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    1.233539] mali ff9a0000.gpu: Protected mode not available
[    1.234611] mali ff9a0000.gpu: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    1.234797] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    1.235119] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 414; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    1.236311] mali ff9a0000.gpu: Probed as mali0
[    1.243262] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[    1.243714] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 3
[    1.244088] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    1.244174] xhci-hcd xhci-hcd.11.auto: irq 234, io mem 0xfe800000
[    1.244422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.244451] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.244471] usb usb3: Product: xHCI Host Controller
[    1.244489] usb usb3: Manufacturer: Linux 4.4.126 xhci-hcd
[    1.244507] usb usb3: SerialNumber: xhci-hcd.11.auto
[    1.245357] hub 3-0:1.0: USB hub found
[    1.245422] hub 3-0:1.0: 1 port detected
[    1.246007] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[    1.246279] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 4
[    1.246401] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.246582] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.246616] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.246634] usb usb4: Product: xHCI Host Controller
[    1.246652] usb usb4: Manufacturer: Linux 4.4.126 xhci-hcd
[    1.246670] usb usb4: SerialNumber: xhci-hcd.11.auto
[    1.247481] hub 4-0:1.0: USB hub found
[    1.247552] hub 4-0:1.0: 1 port detected
[    1.250179] xhci-hcd xhci-hcd.11.auto: remove, state 1
[    1.250240] usb usb4: USB disconnect, device number 1
[    1.255436] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
[    1.255800] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 5
[    1.256235] xhci-hcd xhci-hcd.12.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    1.256322] xhci-hcd xhci-hcd.12.auto: irq 235, io mem 0xfe900000
[    1.256572] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.256602] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.256621] usb usb5: Product: xHCI Host Controller
[    1.256640] usb usb5: Manufacturer: Linux 4.4.126 xhci-hcd
[    1.256658] usb usb5: SerialNumber: xhci-hcd.12.auto
[    1.257458] hub 5-0:1.0: USB hub found
[    1.257528] hub 5-0:1.0: 1 port detected
[    1.258034] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
[    1.258295] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 6
[    1.258416] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.258591] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.258618] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.258636] usb usb6: Product: xHCI Host Controller
[    1.258655] usb usb6: Manufacturer: Linux 4.4.126 xhci-hcd
[    1.258672] usb usb6: SerialNumber: xhci-hcd.12.auto
[    1.259542] hub 6-0:1.0: USB hub found
[    1.259614] hub 6-0:1.0: 1 port detected
[    1.263218] ehci-platform fe380000.usb: EHCI Host Controller
[    1.263554] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 7
[    1.263871] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    1.272398] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.272709] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.272743] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.272770] usb usb7: Product: EHCI Host Controller
[    1.272788] usb usb7: Manufacturer: Linux 4.4.126 ehci_hcd
[    1.272806] usb usb7: SerialNumber: fe380000.usb
[    1.273709] hub 7-0:1.0: USB hub found
[    1.273844] hub 7-0:1.0: 1 port detected
[    1.275493] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.275999] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 8
[    1.276332] xhci-hcd xhci-hcd.11.auto: Host not halted after 16000 microseconds.
[    1.276367] xhci-hcd xhci-hcd.11.auto: Host controller not halted, aborting reset.
[    1.276425] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    1.276444] xhci-hcd xhci-hcd.11.auto: USB bus 4 deregistered
[    1.276897] xhci-hcd xhci-hcd.11.auto: remove, state 1
[    1.276995] usb usb3: USB disconnect, device number 1
[    1.278095] xhci-hcd xhci-hcd.11.auto: USB bus 3 deregistered
[    1.333853] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.333998] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.334024] usb usb8: Product: Generic Platform OHCI controller
[    1.334048] usb usb8: Manufacturer: Linux 4.4.126 ohci_hcd
[    1.334071] usb usb8: SerialNumber: fe3a0000.usb
[    1.335495] hub 8-0:1.0: USB hub found
[    1.335616] hub 8-0:1.0: 1 port detected
[    1.338053] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.338501] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.338639] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.338922] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.339133] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.339394] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.339561] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.340426] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.352916] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.366324] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    1.369576] rockchip-dmc dmc: Failed to get leakage
[    1.369734] rockchip-dmc dmc: Failed to get pvtm
[    1.370541] rockchip-dmc dmc: could not find power_model node
[    1.371966] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[    1.386832] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[    1.393426] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input2
[    1.396662] rockchip-cdndp-sound dp-sound: spdif-hifi <-> ff870000.spdif mapping ok
[    1.396834] hdmi-audio-codec hdmi-audio-codec.10.auto: ASoC: Failed to create Playback debugfs file
[    1.398730] input: rockchip-cdndp-sound DP Jack as /devices/platform/dp-sound/sound/card2/input3
[    1.401673] i2c i2c-2: sensor_probe: gs_mc3230,ffffffc004ea8400
[    1.401819] sensors 2-004c: sensor_chip_init:gs_mc3230:devid=0x0,ops=0xffffff80092dcfe8
[    1.411040] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.412759] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.414460] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.417472] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.421140] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[    1.475869] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    1.579191] usb 7-1: new high-speed USB device number 2 using ehci-platform
[    1.685292] vendor storage:20160801 ret = 0
[    1.704300] usb 7-1: New USB device found, idVendor=1a40, idProduct=0101
[    1.704399] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.704428] usb 7-1: Product: USB 2.0 Hub [MTT]
[    1.706030] hub 7-1:1.0: USB hub found
[    1.706405] hub 7-1:1.0: 4 ports detected
[    1.831596] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 8
[    1.835054] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    1.835157] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    4.956053] rk3x-i2c ff120000.i2c: timeout, ipd: 0x81, state: 3
[    6.632733] rk3x-i2c ff120000.i2c: timeout, ipd: 0x81, state: 3
[    8.134411] [Gsensor] init_3230_ctl_data 445 : error: -6
[    8.134486] sensors 2-004c: sensor_initial:fail to init sensor
[    8.134510] sensors 2-004c: sensor_chip_init:fail to init sensor
[    8.134534] i2c i2c-2: sensor_probe failed -2
[    8.134534]
[    8.134590] sensors: probe of 2-004c failed with error -2
[    8.136292] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 09:05:34 UTC (1358499934)
[    8.138858] It doesn't contain Rogue gpu
[    8.173855] vdd3v3_pcie: disabling
[    8.173994] vcc_sd: disabling
[    8.175481] u
回复

使用道具 举报

36

积分

0

威望

0

贡献

技术小白

积分
36
发表于 2020-11-14 15:09:45        只看该作者  板凳
是不是升级扩展EMMC容量需要将板子寄回去,让厂家那边帮忙升级EMMC容量才行
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表