|
|
【技术讨论】
rk3128 移植rk816 开机失败
发表于 2021-1-13 11:04:20
浏览：4299
|
回复：1
打印
只看该作者
[复制链接]
楼主
不知道是不是移植电源失败的原因,kernel 卡死
具体log:
DDR Version 2.04 20150121
In
1A1A1B1C 3
DDR3
1C1C1B1C F
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
mach:2
OUT
Boot1 Release Time: 2015-05-25, version: 2.25
ChipType = a 1365
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=e90000
FwPar▒*V▒k%▒▒▒▒0 20
StorageInit ok = 258541
theL
U-Boot 2014.10-RK3128-10 (Jan 13 2021 - 10:18:21)
CPU: rk3128
CPU's clock information:
arm pll = 300000000HZ
periph pll = 594000000HZ
ddr pll = 600000000HZ
codec pll = 400000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks:1
Adding bank:0000000060000000(0000000040000000)
128 MiB
rk dma▒storage init OK!
Using default environment
GetParam
check parameter success
failed to prepare fdt from boot!
power key: bank-3 pin-23
can't find dts node for ricoh619
can't find dts node for act8846
can't find dts node for rk808
device rk818 is disabled
rk816_set_regulator_init vdd_arm init uV:1300000
cpu_det_gpio up
pmic:rk816
Can't find dts node for fuel guage cw201x
can't find dts node for ADC
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2021-01-13#2.25
empty serial no.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [1]
failed to find part:logo
no fuel gauge found
got recovery cmd from misc.
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x62000000 (0x006b1838)
ramdisk @ 0x65bf0000 (0x002c8a08)
bootrk: do_bootm_linux...
Loading Device Tree to 65600000, end 65617027 ... OK
Add bank:0000000060000000, 0000000040000000
Starting kernel ...
<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0+ (hesson@hesson) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #4 SMP PREEMPT Tue Jan 12 10:02:45 HKT 2021
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Rockchip RK3128, model: rockchip,rk3128
[ 0.000000] rockchip_uboot_logo_setup: mem: 2000000@9dc00000, offset:0
[ 0.000000] rockchip_uboot_mem_reserve: reserve 2000000@9dc00000 for uboot logo
[ 0.000000] rockchip_ion_reserve
[ 0.000000] ion heap(cma): base(0) size(800000) align(0)
[ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[ 0.000000] cma: CMA: reserved 8 MiB at 9d400000
[ 0.000000] ion_reserve: cma reserved base 9d400000 size 8388608
[ 0.000000] cma: CMA: reserved 16 MiB at 7f000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1684000 s14016 r8192 d14656 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261120
[ 0.000000] Kernel command line: vmalloc=496M rockchip_jtag console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00006000@0x0000E000(kernel),0x00006000@0x00014000(boot),0x00010000@0x0001A000(recovery),0x00020000@0x0002A000(backup),0x00040000@0x0004A000(cache),0x00008000@0x0008A000(metadata),0x00002000@0x00092000(kpanic),0x00200000@0x00094000(system),0x00020000@0x00294000(radical_update),-@0x002b4000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x9dc00000 loader.timestamp=2021-01-13_10:18:21 pmic_mode=rk816
[ 0.000000] rockchip jtag enabled
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 962604k/962604k available, 85972k reserved, 483328K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0bc28dc (12011 kB)
[ 0.000000] .init : 0xc0bc3000 - 0xc0c1b6c0 ( 354 kB)
[ 0.000000] .data : 0xc0c1c000 - 0xc0d369f8 (1131 kB)
[ 0.000000] .bss : 0xc0d369f8 - 0xc0e59e7c (1166 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
[ 0.000000] rkclk_init_clks: cnt_parent = 25
[ 0.000000] rkclk_init_clks: cnt_rate = 17
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ 0.000000] process version: 0
[ 0.000000] channel:0, lkg:21
[ 0.000000] target-temp:85
[ 0.000000] FirePrime hardware version: V01
[ 0.000000] channel:0, lkg:21
[ 0.000000] target-temp:85
[ 0.000000] channel:0, lkg:21
[ 0.000000] target-temp:85
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.544887] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.544913] pid_max: default: 32768 minimum: 301
[ 0.545122] Security Framework initialized
[ 0.545151] SELinux: Initializing.
[ 0.545285] Mount-cache hash table entries: 512
[ 0.546496] Initializing cgroup subsys debug
[ 0.546522] Initializing cgroup subsys memory
[ 0.546575] Initializing cgroup subsys freezer
[ 0.546636] CPU: Testing write buffer coherency: ok
[ 0.547153] /cpus/cpu@0 missing clock-frequency property
[ 0.547181] /cpus/cpu@1 missing clock-frequency property
[ 0.547200] /cpus/cpu@2 missing clock-frequency property
[ 0.547219] /cpus/cpu@3 missing clock-frequency property
[ 0.547295] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.547365] Setting up static identity map for 0xc085e208 - 0xc085e260
[ 0.549262] last_log: 0x7e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x179d (version 3.0)
[ 0.622734] CPU1: Booted secondary processor
[ 0.622790] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.642424] CPU2: Booted secondary processor
[ 0.642469] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.662186] CPU3: Booted secondary processor
[ 0.662229] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.662411] Brought up 4 CPUs
[ 0.662463] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.662479] CPU: All CPU(s) started in SVC mode.
[ 0.663884] devtmpfs: initialized
[ 0.674071] pinctrl core: initialized pinctrl subsystem
[ 0.674566] regulator-dummy: no parameters
[ 0.676080] NET: Registered protocol family 16
[ 0.679508] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.680068] ion_snapshot: 0x7ea18000 map to 0xe0907000 and copy to 0xc0e35384 (version 0.1)
[ 0.680288] Registered FIQ tty driver
[ 0.682643] console [ttyFIQ0] enabled
[ 0.683051] Registered fiq debugger ttyFIQ0
[ 0.684825] rockchip_get_bank_data:name=/pinctrl@20008000/gpio0@2007c000 start=0x2007c000,end=0x2007c0ff
[ 0.684955] rockchip_get_bank_data:name=/pinctrl@20008000/gpio1@20080000 start=0x20080000,end=0x200800ff
[ 0.685039] rockchip_get_bank_data:name=/pinctrl@20008000/gpio2@20084000 start=0x20084000,end=0x200840ff
[ 0.685116] rockchip_get_bank_data:name=/pinctrl@20008000/gpio3@20088000 start=0x20088000,end=0x200880ff
[ 0.685204] rockchip_get_bank_data:name=/pinctrl@20008000/gpio15@2008A000 start=0x20086000,end=0x200860ff
[ 0.685276] rockchip_pinctrl_probe:name=rk312x-GPIO,type=5
[ 0.685320] rockchip_pinctrl_probe:name=base start=0x20008000,end=0x200080a7
[ 0.685351] rockchip_pinctrl_probe:name=mux start=0x200080a8,end=0x200080f3
[ 0.685380] rockchip_pinctrl_probe:name=pull start=0x20008118,end=0x20008137
[ 0.685408] rockchip_pinctrl_probe:name=drv start=0x20008100,end=0x20008103
[ 0.688120] rockchip_pinctrl_probe:init ok
[ 0.695442] rk_iommu 1010e300.vop_mmu: (vop) Enter
[ 0.695496] rk_iommu 1010e300.vop_mmu: skip request vop mmu irq
[ 0.695604] rk_iommu 1010e300.vop_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.695633] rk_iommu 1010e300.vop_mmu: (vop) Initialized
[ 0.695921] rk_iommu 10104440.hevc_mmu: (hevc) Enter
[ 0.696064] rk_iommu 10104440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.696095] rk_iommu 10104440.hevc_mmu: (hevc) Initialized
[ 0.696369] rk_iommu 10106800.vpu_mmu: (vpu) Enter
[ 0.696493] rk_iommu 10106800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.696523] rk_iommu 10106800.vpu_mmu: (vpu) Initialized
[ 0.696779] rk_iommu 10108800.iep_mmu: (iep) Enter
[ 0.696902] rk_iommu 10108800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.696932] rk_iommu 10108800.iep_mmu: (iep) Initialized
[ 0.698262] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.698292] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.698585] DDR DEBUG: version 1.02 20140828
[ 0.698608] DDR DEBUG: DRAM Type:DDR3
[ 0.698633] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB
[ 0.698679] DDR DEBUG: init success!!! freq=300MHz
[ 0.751772] bio: create slab <bio-0> at 0
[ 0.752811] Rockchip hdmi driver version 2.0
.
[ 0.754523] SCSI subsystem initialized
[ 0.754883] usbcore: registered new interface driver usbfs
[ 0.754988] usbcore: registered new interface driver hub
[ 0.755204] usbcore: registered new device driver usb
[ 0.756151] rk3126-usb-control usb_control.18: invalid host gpio-2
[ 0.757428] rockchip_i2c 20072000.i2c: i2c-0: Rockchip I2C adapter
[ 0.759142] media: Linux media interface: v0.10
[ 0.759244] Linux video capture interface: v2.00
[ 0.759452] pps_core: LinuxPPS API ver. 1 registered
[ 0.759478] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.759526] PTP clock support registered
[ 0.759622] i2c-core: driver [bq24296] using legacy suspend method
[ 0.759645] i2c-core: driver [bq24296] using legacy resume method
[ 0.760077] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[ 0.760530] ------------[ cut here ]------------
[ 0.760573] WARNING: at drivers/clk/clk.c:842 clk_disable+0x18/0x24()
[ 0.760595] Modules linked in:
[ 0.760624] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #4
[ 0.760676] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ 0.760717] [<c001175c>] (show_stack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
[ 0.760758] [<c0036278>] (warn_slowpath_common+0x4c/0x68) from [<c00362ac>] (warn_slowpath_null+0x18/0x1c)
[ 0.760798] [<c00362ac>] (warn_slowpath_null+0x18/0x1c) from [<c061d8c4>] (clk_disable+0x18/0x24)
[ 0.760842] [<c061d8c4>] (clk_disable+0x18/0x24) from [<c059fd2c>] (rk29_wdt_stop+0x28/0x38)
[ 0.760882] [<c059fd2c>] (rk29_wdt_stop+0x28/0x38) from [<c05a0308>] (rk29_wdt_probe+0x1f0/0x258)
[ 0.760925] [<c05a0308>] (rk29_wdt_probe+0x1f0/0x258) from [<c0301cbc>] (platform_drv_probe+0x14/0x18)
[ 0.760969] [<c0301cbc>] (platform_drv_probe+0x14/0x18) from [<c0300a84>] (really_probe+0xa8/0x20c)
[ 0.761008] [<c0300a84>] (really_probe+0xa8/0x20c) from [<c0300ce0>] (driver_probe_device+0x30/0x48)
[ 0.761048] [<c0300ce0>] (driver_probe_device+0x30/0x48) from [<c0300d58>] (__driver_attach+0x60/0x84)
[ 0.761087] [<c0300d58>] (__driver_attach+0x60/0x84) from [<c02ff534>] (bus_for_each_dev+0x50/0x90)
[ 0.761126] [<c02ff534>] (bus_for_each_dev+0x50/0x90) from [<c03002e4>] (bus_add_driver+0xac/0x20c)
[ 0.761165] [<c03002e4>] (bus_add_driver+0xac/0x20c) from [<c0301234>] (driver_register+0x9c/0x138)
[ 0.761205] [<c0301234>] (driver_register+0x9c/0x138) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
[ 0.761247] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0bc3b28>] (do_initcalls+0x70/0xa0)
[ 0.761289] [<c0bc3b28>] (do_initcalls+0x70/0xa0) from [<c0bc3be8>] (kernel_init_freeable+0x90/0x130)
[ 0.761331] [<c0bc3be8>] (kernel_init_freeable+0x90/0x130) from [<c083b160>] (kernel_init+0x8/0xe4)
[ 0.761372] [<c083b160>] (kernel_init+0x8/0xe4) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[ 0.761435] ---[ end trace 86de5666825a7981 ]---
[ 0.761494] ------------[ cut here ]------------
[ 0.761526] WARNING: at drivers/clk/clk.c:751 clk_unprepare+0x14/0x1c()
[ 0.761546] Modules linked in:
[ 0.761572] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.10.0+ #4
[ 0.761613] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ 0.761652] [<c001175c>] (show_stack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
[ 0.761691] [<c0036278>] (warn_slowpath_common+0x4c/0x68) from [<c00362ac>] (warn_slowpath_null+0x18/0x1c)
[ 0.761732] [<c00362ac>] (warn_slowpath_null+0x18/0x1c) from [<c061ebe0>] (clk_unprepare+0x14/0x1c)
[ 0.761774] [<c061ebe0>] (clk_unprepare+0x14/0x1c) from [<c05a0308>] (rk29_wdt_probe+0x1f0/0x258)
[ 0.761817] [<c05a0308>] (rk29_wdt_probe+0x1f0/0x258) from [<c0301cbc>] (platform_drv_probe+0x14/0x18)
[ 0.761858] [<c0301cbc>] (platform_drv_probe+0x14/0x18) from [<c0300a84>] (really_probe+0xa8/0x20c)
[ 0.761897] [<c0300a84>] (really_probe+0xa8/0x20c) from [<c0300ce0>] (driver_probe_device+0x30/0x48)
[ 0.761937] [<c0300ce0>] (driver_probe_device+0x30/0x48) from [<c0300d58>] (__driver_attach+0x60/0x84)
[ 0.761976] [<c0300d58>] (__driver_attach+0x60/0x84) from [<c02ff534>] (bus_for_each_dev+0x50/0x90)
[ 0.762014] [<c02ff534>] (bus_for_each_dev+0x50/0x90) from [<c03002e4>] (bus_add_driver+0xac/0x20c)
[ 0.762053] [<c03002e4>] (bus_add_driver+0xac/0x20c) from [<c0301234>] (driver_register+0x9c/0x138)
[ 0.762092] [<c0301234>] (driver_register+0x9c/0x138) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
[ 0.762131] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0bc3b28>] (do_initcalls+0x70/0xa0)
[ 0.762172] [<c0bc3b28>] (do_initcalls+0x70/0xa0) from [<c0bc3be8>] (kernel_init_freeable+0x90/0x130)
[ 0.762212] [<c0bc3be8>] (kernel_init_freeable+0x90/0x130) from [<c083b160>] (kernel_init+0x8/0xe4)
[ 0.762253] [<c083b160>] (kernel_init+0x8/0xe4) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[ 0.762278] ---[ end trace 86de5666825a7982 ]---
[ 0.763368] Rockchip ion module is successfully loaded (v1.1)
[ 0.763635] Advanced Linux Sound Architecture Driver Initialized.
[ 0.764369] Bluetooth: Core ver 2.16
[ 0.764447] NET: Registered protocol family 31
[ 0.764470] Bluetooth: HCI device and connection manager initialized
[ 0.764504] Bluetooth: HCI socket layer initialized
[ 0.764534] Bluetooth: L2CAP socket layer initialized
[ 0.764588] Bluetooth: SCO socket layer initialized
[ 0.765038] cfg80211: Calling CRDA to update world regulatory domain
[ 0.767283] rk816_i2c_probe,line=793
[ 0.767980] pmic is rk816, chip version is 8165
[ 0.768514] pmic on/off source: on=0x40, off=0x0
[ 0.773625] cpu_det_gpio up
[ 0.773663] rk816_i2c_probe: rk816_pmic_sleep=0
[ 0.777307] rk816_regulator_probe: compatible rk816
[ 0.780875] vdd_arm: 712 <--> 1450 mV at 1300 mV
[ 0.783953] vdd_logic: 712 <--> 1450 mV at 1100 mV
[ 0.787048] vcc_ddr: 1200 mV
[ 0.790066] vccio: 3000 <--> 3300 mV at 3300 mV
[ 0.793346] rk816_ldo1: 2800 mV
[ 0.796571] rk816_ldo2: 1800 mV
[ 0.799771] rk816_ldo3: 1100 mV
[ 0.802988] vcc_lan: 3300 mV
[ 0.806209] rk816_ldo5: 3300 mV
[ 0.809404] rk816_ldo6: 3300 mV
[ 0.810392] rk816_i2c_probe success
[ 0.810466] i2c-core: driver [rk816] using legacy suspend method
[ 0.810488] i2c-core: driver [rk816] using legacy resume method
[ 0.810569] i2c-core: driver [rk818] using legacy suspend method
[ 0.810592] i2c-core: driver [rk818] using legacy resume method
[ 0.811279] rk816_rtc_probe,line=463
[ 0.811323] rk8xx-rtc: probe of rk8xx-rtc failed with error -22
[ 0.812936] Switching to clocksource arch_sys_counter
[ 0.849242] fb disp policy is box
[ 0.849360] rk-fb rockchip-fb: rk fb ion client create success!
[ 0.849387] rk-fb rockchip-fb: rockchip framebuffer driver probe
[ 0.849802] rk-screen rk_screen.9: rockchip screen probe success
[ 0.851193] pwr_ctr_name:lcd_en
[ 0.851193] pwr_type:gpio
[ 0.851193] gpio:66
[ 0.851193] atv_val:0
[ 0.851193] delay:100
[ 0.851193]
[ 0.851784] graphics fb0: rockchip framebuffer registerd:fb0
[ 0.852557] graphics fb1: rockchip framebuffer registerd:fb1
[ 0.853024] graphics fb2: rockchip framebuffer registerd:fb2
[ 0.952075] rk312x-lcdc lcdc0: set lcdc0 dclk failed
[ 0.952114] rk312x-lcdc lcdc0: lcdc0: dclk:59400000>>fps:70
[ 0.952141] rk312x-lcdc lcdc0: wakeup from standby!
[ 0.966021] alloc_buffer:ion_phy_addr=0x10000000
[ 0.970767] fb0:phy:10000000>>vir:e0931000>>len:0x800000
[ 0.980919] rk312x-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[ 0.984188] NET: Registered protocol family 2
[ 0.985101] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.985236] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.985348] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.985459] TCP: reno registered
[ 0.985488] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.985535] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.985921] NET: Registered protocol family 1
[ 0.986139] rk816_gpio_probe: compatible rk816
[ 0.986376] rk8xx-gpio rk8xx-gpio: driver success
[ 0.986729] rk816-bat: support adc dc
[ 1.002127] rk816-bat: save fcc: 4000
[ 1.003711] rk816-bat: first on: dsoc=100, rsoc=100 cap=4000, fcc=4000, ov=4248
[ 1.016783] rk816-bat: driver version 1.2
[ 1.017580] Unpacking initramfs...
[ 1.264039] Freeing initrd memory: 2848K (c5bf0000 - c5eb8000)
[ 1.265634] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available
[ 1.266359] vcodec_service: probe device vpu_combo.10
[ 1.266397] vcodec_service: No reset resource define
[ 1.266416] vcodec_service: No reset resource define
[ 1.266435] vcodec_service: No reset resource define
[ 1.266556] vcodec vpu_combo.10: failed on clk_get clk_cabac
[ 1.266663] vcodec_service: vpu_combo.10: power on
[ 1.266815] vcodec_service: probe device 10106000.vpu_service
[ 1.266874] vcodec_service: checking hw id 4831
[ 1.268207] vcodec_service: probe device 10104000.hevc_service
[ 1.268273] vcodec_service: checking hw id 6867
[ 1.269223] vcodec_service: vpu_combo.10: power off...
[ 1.269291] vcodec_service: done
[ 1.269311] vcodec_service: init success
[ 1.269473] rknandbase v1.0 2014-03-31
[ 1.269727] rknand_probe clk rate = 148500000
[ 1.269896] rknand_driver:ret = 0
[ 1.272060] audit: initializing netlink socket (disabled)
[ 1.272135] type=2000 audit(0.730:1): initialized
[ 1.273481] bounce pool size: 64 pages
[ 1.283850] fuse init (API version 7.22)
[ 1.284701] msgmni has been set to 973
[ 1.288431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.288466] io scheduler noop registered
[ 1.288487] io scheduler deadline registered
[ 1.288692] io scheduler cfq registered (default)
[ 1.294068] rga 1010c000.rga: rga ion client create success!
[ 1.294409] rga: Driver loaded succesfully
[ 1.294528] rga: Module initialized.
[ 1.295866] IEP Power ON
[ 1.295944] iep ion client create success!
[ 1.296413] IEP Power OFF
[ 1.296449] IEP Driver loaded succesfully
[ 1.296596] Module initialized.
[ 1.299711] dma-pl330 20078000.pdma: Loaded driver for PL330 DMAC-2364208
[ 1.299752] dma-pl330 20078000.pdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-16 Num_Events-16
[ 1.300607] rk_serial.c v1.8 2014-03-04
[ 1.300930] 20060000.serial: ttyS0 at MMIO 0x20060000 (irq = 52) is a rk29_serial.0
[ 1.301355] serial 20060000.serial: membase e3152000
[ 1.301565] 20064000.serial: ttyS1 at MMIO 0x20064000 (irq = 53) is a rk29_serial.1
[ 1.301969] serial 20064000.serial: membase e3154000
[ 1.308289] loop: module loaded
[ 1.308422] i2c-core: driver [mpu6050B1] using legacy suspend method
[ 1.308447] i2c-core: driver [mpu6050B1] using legacy resume method
[ 1.308472] mpu_init: Probe name mpu6050B1
[ 1.308788] ak8963_mod_init: Probe name ak8963_mod
[ 1.310062] SCSI Media Changer driver v0.25
[ 1.310779] tun: Universal TUN/TAP device driver, 1.6
[ 1.310805] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.311088] vmac_init.
[ 1.311489] PPP generic driver version 2.4.2
[ 1.311809] PPP BSD Compression module registered
[ 1.311832] PPP Deflate Compression module registered
[ 1.311868] PPP MPPE Compression module registered
[ 1.311890] NET: Registered protocol family 24
[ 1.311944] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.311970] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.311992] Rockchip WiFi SYS interface (V1.00) ...
[ 1.312066] esp_mem_init enter date Jan 11 2021 18:11:54
[ 1.312086] esp_mem_init VERSION [V2.5]
[ 1.312162] esp_mem_init complete
[ 1.312288] usbcore: registered new interface driver catc
[ 1.312377] usbcore: registered new interface driver kaweth
[ 1.312401] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 1.312487] usbcore: registered new interface driver pegasus
[ 1.312585] usbcore: registered new interface driver rtl8150
[ 1.312673] usbcore: registered new interface driver r8152
[ 1.312695] hso: drivers/net/usb/hso.c: Option Wireless
[ 1.312848] usbcore: registered new interface driver hso
[ 1.312954] usbcore: registered new interface driver asix
[ 1.313044] usbcore: registered new interface driver ax88179_178a
[ 1.313131] usbcore: registered new interface driver cdc_ether
[ 1.313225] usbcore: registered new interface driver cdc_eem
[ 1.313311] usbcore: registered new interface driver dm9601
[ 1.313397] usbcore: registered new interface driver dm9620
[ 1.313506] usbcore: registered new interface driver smsc75xx
[ 1.313614] usbcore: registered new interface driver smsc95xx
[ 1.313703] usbcore: registered new interface driver gl620a
[ 1.313799] usbcore: registered new interface driver net1080
[ 1.313887] usbcore: registered new interface driver plusb
[ 1.313976] usbcore: registered new interface driver rndis_host
[ 1.314064] usbcore: registered new interface driver cdc_subset
[ 1.314149] usbcore: registered new interface driver zaurus
[ 1.314238] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1.314389] usbcore: registered new interface driver int51x1
[ 1.314474] usbcore: registered new interface driver kalmia
[ 1.314564] usbcore: registered new interface driver ipheth
[ 1.314650] usbcore: registered new interface driver sierra_net
[ 1.314731] usbcore: registered new interface driver cx82310_eth
[ 1.314828] usbcore: registered new interface driver cdc_ncm
[ 1.314970] usbcore: registered new interface driver qmi_wwan
[ 1.315056] usbcore: registered new interface driver cdc_mbim
[ 1.315079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.317027] EHCI: ehci_rk_probe e3180000 e3180010
[ 1.317063] rockchip_ehci_host 101c0000.usb: EHCI Host Controller
[ 1.317116] rockchip_ehci_host 101c0000.usb: new USB bus registered, assigned bus number 1
[ 1.317761] rockchip_ehci_host 101c0000.usb: irq 43, io mem 0x101c0000
[ 1.334592] rockchip_ehci_host 101c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.334741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.334772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.334798] usb usb1: Product: EHCI Host Controller
[ 1.334822] usb usb1: Manufacturer: Linux 3.10.0+ ehci_hcd
[ 1.334846] usb usb1: SerialNumber: 101c0000.usb
[ 1.335724] hub 1-0:1.0: USB hub found
[ 1.335772
|
|
