使用 gitlab 上的源碼 , edp 螢幕無法點亮

ac753951456

可以開進android 主畫面, ADB shell 亦正常, 但 7.85 edp 螢幕黑屏,
希望求解大神！

源碼 : https://gitlab.com/TeeFirefly/FireNow-Nougat/tree/firefly-rk3399
kernel log :
[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Initializing cgroup subsys schedtune

[    0.000000] Linux version 4.4.103 (nvt04573@oaalnx16) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 20 09:30:33 CST 2021

[    0.000000] Boot CPU: AArch64 Processor [410fd034]

[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')

[    0.000000] bootconsole [uart0] enabled

[    0.000000] hdmi init vic is -1

[    0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB

[    0.000000] cma: Reserved 16 MiB at 0x000000007f000000

[    0.000000] On node 0 totalpages: 516096

[    0.000000]   DMA zone: 8184 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 516096 pages, LIFO batch:31

[    0.000000] psci: probing for conduit method from DT.

[    0.000000] psci: PSCIv1.0 detected in firmware.

[    0.000000] psci: Using standard PSCI v0.2 function IDs

[    0.000000] psci: Trusted OS migration not required

[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef8000 s45504 r8192 d32320 u86016

[    0.000000] pcpu-alloc: s45504 r8192 d32320 u86016 alloc=21*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5

[    0.000000] Detected VIPT I-cache on CPU0

[    0.000000] CPU features: enabling workaround for ARM erratum 845719

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 507912

[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00010000@0x0002C000(recovery),0x00038000@0x0003C000(backup),0x00040000@0x00074000(cache),0x00300000@0x000B4000(system),0x00008000@0x003B4000(metadata),0x00002000@0x003BC000(baseparamer),-@0x003BE000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2021-04-20_10:33:16 hdmi.vic=-1 SecureBootCheckOk=0

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.000000] software IO TLB [mem 0x7eeb0000-0x7eef0000] (0MB) mapped at [ffffffc07eeb0000-ffffffc07eeeffff]

[    0.000000] Memory: 1988588K/2064384K available (11006K kernel code, 1640K rwdata, 5256K rodata, 832K init, 1073K bss, 59412K reserved, 16384K cma-reserved)

[    0.000000] Virtual kernel memory layout:

[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)

[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)

[    0.000000]       .init : 0xffffff8009070000 - 0xffffff8009140000   (   832 KB)

[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008b40000   ( 11008 KB)

[    0.000000]     .rodata : 0xffffff8008b40000 - 0xffffff8009070000   (  5312 KB)

[    0.000000]       .data : 0xffffff8009140000 - 0xffffff80092da008   (  1641 KB)

[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)

[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)

[    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)

[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)

[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000]      Build-time adjustment of leaf fanout to 64.

[    0.000000]      RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6

[    0.000000] NR_IRQS:64 nr_irqs:64 0

[    0.000000] GIC: Using split EOI/Deactivate mode

[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000

[    0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)

[    0.000000] ITS: using cache flushing for cmd queue

[    0.000000] GIC: using LPI property table @0x000000000a280000

[    0.000000] ITS: Allocated 1792 chunks for LPIs

[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000

[    0.000000] CPU0: using LPI pending table @0x000000000a290000

[    0.000000] GIC: using cache flushing for LPI property table

[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }

[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }

[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work

[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work

[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31

[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).

[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns

[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns

[    0.001927] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)

[    0.002891] pid_max: default: 32768 minimum: 301

[    0.003406] Security Framework initialized

[    0.003796] SELinux:  Initializing.

[    0.004170] SELinux:  Starting in permissive mode

[    0.004210] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)

[    0.004839] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)

[    0.006273] Initializing cgroup subsys freezer

[    0.006701] Initializing cgroup subsys debug

[    0.008001] sched-energy: Sched-energy-costs installed from DT

[    0.008551] CPU0: update cpu_capacity 401

[    0.009004] ASID allocator initialised with 65536 entries

[    0.025830] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created

[    0.027081] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created

[    0.039227] Detected VIPT I-cache on CPU1

[    0.039260] CPU1: found redistributor 1 region 0:0x00000000fef20000

[    0.039295] CPU1: using LPI pending table @0x000000000a3f0000

[    0.039337] CPU1: update cpu_capacity 401

[    0.039340] CPU1: Booted secondary processor [410fd034]

[    0.049224] Detected VIPT I-cache on CPU2

[    0.049243] CPU2: found redistributor 2 region 0:0x00000000fef40000

[    0.049276] CPU2: using LPI pending table @0x000000007c020000

[    0.049304] CPU2: update cpu_capacity 401

[    0.049307] CPU2: Booted secondary processor [410fd034]

[    0.059261] Detected VIPT I-cache on CPU3

[    0.059280] CPU3: found redistributor 3 region 0:0x00000000fef60000

[    0.059312] CPU3: using LPI pending table @0x000000007c060000

[    0.059339] CPU3: update cpu_capacity 401

[    0.059343] CPU3: Booted secondary processor [410fd034]

[    0.069311] Detected PIPT I-cache on CPU4

[    0.069340] CPU4: found redistributor 100 region 0:0x00000000fef80000

[    0.069379] CPU4: using LPI pending table @0x000000007c0a0000

[    0.069419] CPU4: update cpu_capacity 1024

[    0.069422] CPU4: Booted secondary processor [410fd082]

[    0.079333] Detected PIPT I-cache on CPU5

[    0.079350] CPU5: found redistributor 101 region 0:0x00000000fefa0000

[    0.079386] CPU5: using LPI pending table @0x000000007c0e0000

[    0.079413] CPU5: update cpu_capacity 1024

[    0.079417] CPU5: Booted secondary processor [410fd082]

[    0.079502] Brought up 6 CPUs

[    0.091609] SMP: Total of 6 processors activated.

[    0.092051] CPU features: detected feature: GIC system register CPU interface

[    0.092721] CPU: All CPU(s) started at EL2

[    0.093144] alternatives: patching kernel code

[    0.095237] devtmpfs: initialized

[    0.115989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[    0.116964] futex hash table entries: 2048 (order: 5, 131072 bytes)

[    0.118291] pinctrl core: initialized pinctrl subsystem

[    0.120319] Failed to find legacy iommu devices

[    0.121136] NET: Registered protocol family 16

[    0.121920] schedtune: init normalization constants...

[    0.122424] schedtune: CLUSTER[0-3]      min_pwr:    56 max_pwr:   222

[    0.123059] schedtune: CPU[0]            min_pwr:     0 max_pwr:   222

[    0.123704] schedtune: CPU[1]            min_pwr:     0 max_pwr:   222

[    0.124338] schedtune: CPU[2]            min_pwr:     0 max_pwr:   222

[    0.124972] schedtune: CPU[3]            min_pwr:     0 max_pwr:   222

[    0.125606] schedtune: CLUSTER[4-5]      min_pwr:    65 max_pwr:  1108

[    0.126239] schedtune: CPU[4]            min_pwr:     0 max_pwr:  1108

[    0.126872] schedtune: CPU[5]            min_pwr:     0 max_pwr:  1108

[    0.127511] schedtune: SYSTEM            min_pwr:   121 max_pwr:  4434

[    0.128145] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12

[    0.128886] schedtune: verify normalization constants...

[    0.129403] schedtune: max_pwr/2^0: 4313 => norm_pwr:  1024

[    0.129944] schedtune: max_pwr/2^1: 2156 => norm_pwr:   511

[    0.130485] schedtune: max_pwr/2^2: 1078 => norm_pwr:   255

[    0.131032] schedtune: max_pwr/2^3:  539 => norm_pwr:   127

[    0.131573] schedtune: max_pwr/2^4:  269 => norm_pwr:    63

[    0.132114] schedtune: max_pwr/2^5:  134 => norm_pwr:    31

[    0.132655] schedtune: configured to support 5 boost groups

[    0.141068] cpuidle: using governor ladder

[    0.151071] cpuidle: using governor menu

[    0.151464] Registered FIQ tty driver

[    0.152136] vdso: 2 pages (1 code @ ffffff8008b46000, 1 data @ ffffff8009144000)

[    0.152878] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

[    0.154939] DMA: preallocated 2048 KiB pool for atomic allocations

[    0.169365] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0

[    0.169436] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1

[    0.169499] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2

[    0.169564] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3

[    0.169632] gpiochip_add: registered GPIOs 128 to 159 on device: gpio4

[    0.175895] console [pstore0] enabled

[    0.176491] pstore: Registered ramoops as persistent store backend

[    0.177095] ramoops: attached 0xf0000@0x110000, ecc: 0/0

[    0.179941] fiq debugger fiq mode enabled

[    0.180596] console [ttyFIQ0] enabled

[    0.181298] bootconsole [uart0] disabled

[    0.182200] Registered fiq debugger ttyFIQ0

[    0.212341] Rockchip hdmi driver version 2.0

[    0.212341] .

[    0.212823] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0)

[    0.212872] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0)

[    0.213125] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'

[    0.213422] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)

[    0.213608] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-sys[0]'

[    0.213755] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'

[    0.213978] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0)

[    0.214212] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-3g-regulator[0]' - status (0)

[    0.214625] iommu: Adding device ff650000.vpu_service to group 0

[    0.214728] iommu: Adding device ff660000.rkvdec to group 1

[    0.214795] iommu: Adding device ff670000.iep to group 2

[    0.214890] iommu: Adding device ff8f0000.vop to group 3

[    0.214967] iommu: Adding device ff900000.vop to group 4

[    0.215078] iommu: Adding device ff910000.isp to group 5

[    0.215155] iommu: Adding device ff920000.isp to group 6

[    0.215843] rk_iommu ff670800.iommu: can't get aclk

[    0.215863] rk_iommu ff670800.iommu: can't get hclk

[    0.216732] SCSI subsystem initialized

[    0.216899] libata version 3.00 loaded.

[    0.217064] usbcore: registered new interface driver usbfs

[    0.217116] usbcore: registered new interface driver hub

[    0.217194] usbcore: registered new device driver usb

[    0.217579] media: Linux media interface: v0.10

[    0.217620] Linux video capture interface: v2.00

[    0.217754] pps_core: LinuxPPS API ver. 1 registered

[    0.217767] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.217793] PTP clock support registered

[    0.219271] Advanced Linux Sound Architecture Driver Initialized.

[    0.219735] Bluetooth: Core ver 2.21

[    0.219783] NET: Registered protocol family 31

[    0.219794] Bluetooth: HCI device and connection manager initialized

[    0.219812] Bluetooth: HCI socket layer initialized

[    0.219826] Bluetooth: L2CAP socket layer initialized

[    0.219854] Bluetooth: SCO socket layer initialized

[    0.220876] rockchip-cpuinfo cpuinfo: Serial            : d4d2aca27303f432

[    0.221345] clocksource: Switched to clocksource arch_sys_counter

[    0.265509] thermal thermal_zone1: power_allocator: sustainable_power will be estimated

[    0.265748] NET: Registered protocol family 2

[    0.266168] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[    0.266310] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)

[    0.266588] TCP: Hash tables configured (established 16384 bind 16384)

[    0.266666] UDP hash table entries: 1024 (order: 3, 32768 bytes)

[    0.266728] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)

[    0.266903] NET: Registered protocol family 1

[    0.266947] PCI: CLS 0 bytes, default 64

[    0.267416] Trying to unpack rootfs image as initramfs...

[    0.356460] Freeing initrd memory: 1716K

[    0.356981] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available

[    0.357074] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available

[    0.359689] audit: initializing netlink subsys (disabled)

[    0.359756] audit: type=2000 audit(0.356:1): initialized

[    0.364787] VFS: Disk quotas dquot_6.6.0

[    0.364907] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.366285] fuse init (API version 7.23)

[    0.366994] SELinux:  Registering netfilter hooks

[    0.367386]

[    0.367386] TEE Core Framework initialization (ver 1:0.1)

[    0.367419] TEE armv7 Driver initialization

[    0.367794] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"

[    0.367811] TEE core: Alloc the misc device "opteearmtz00" (id=0)

[    0.368031] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)

[    0.371981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

[    0.372007] io scheduler noop registered

[    0.372179] io scheduler cfq registered (default)

[    0.373407] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: GPIO lookup for consumer otg-vbus

[    0.373421] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: using device tree for GPIO lookup

[    0.373433] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpios' property of node '/syscon@ff770000/usb2-phy@e460[0]'

[    0.373442] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpio' property of node '/syscon@ff770000/usb2-phy@e460[0]'

[    0.373452] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: using lookup tables for GPIO lookup

[    0.373462] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: lookup for GPIO otg-vbus failed

[    0.373471] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned

[    0.378255] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep

[    0.378271] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup

[    0.378301] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)

[    0.378534] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found

[    0.378561] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found

[    0.378584] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found

[    0.901432] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!

[    0.902181] rockchip-pcie: probe of f8000000.pcie failed with error -110

[    0.903412] pwm-backlight backlight: GPIO lookup for consumer enable

[    0.903425] pwm-backlight backlight: using device tree for GPIO lookup

[    0.903437] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]'

[    0.903448] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]'

[    0.903459] pwm-backlight backlight: using lookup tables for GPIO lookup

[    0.903470] pwm-backlight backlight: lookup for GPIO enable failed

[    0.903495] backlight supply power not found, using dummy regulator

[    0.905153] iep: failed to find iep power down clock source.

[    0.906203] IEP Power ON

[    0.906660] IEP Power OFF

[    0.907006] IEP Driver loaded succesfully

[    0.907640] Module initialized.

[    0.908279] rk-vcodec ff650000.vpu_service: probe device

[    0.908338] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07c2fe410

[    0.908518] rk-vcodec ff650000.vpu_service: allocator is drm

[    0.908576] rk-vcodec ff650000.vpu_service: checking hw id 0

[    0.909077] rk-vcodec ff650000.vpu_service: init success

[    0.909679] rk-vcodec ff660000.rkvdec: probe device

[    0.909724] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07c2fec10

[    0.909856] rk-vcodec ff660000.rkvdec: allocator is drm

[    0.909912] rk-vcodec ff660000.rkvdec: checking hw id 6876

[    0.910227] rk-vcodec ff660000.rkvdec: init success

[    0.911937] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330

[    0.911958] dma-pl330 ff6d0000.dma-controller:           DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12

[    0.913299] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330

[    0.913318] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16

[    0.914341] pwm-regulator vdd-log: GPIO lookup for consumer enable

[    0.914351] pwm-regulator vdd-log: using device tree for GPIO lookup

[    0.914362] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'

[    0.914371] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'

[    0.914381] pwm-regulator vdd-log: using lookup tables for GPIO lookup

[    0.914390] pwm-regulator vdd-log: lookup for GPIO enable failed

[    0.914967] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled

[    0.916569] console [ttyS0] disabled

[    0.916618] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A

[    0.917214] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A

[    0.917787] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 40, base_baud = 1500000) is a 16550A

[    0.918205] [drm:drm_core_init] Initialized drm 1.1.0 20060810

[    0.922843] of_get_named_gpiod_flags: parsed 'gpios' property of node '/edp-panel/power_ctr/lcd-en[0]' - status (0)

[    0.922879] of_get_named_gpiod_flags: parsed 'gpios' property of node '/edp-panel/power_ctr/lcd-rst[0]' - status (0)

[    0.922902] edp-panel supply power not found, using dummy regulator

[    0.922960] panel-simple edp-panel: GPIO lookup for consumer enable

[    0.922969] panel-simple edp-panel: using device tree for GPIO lookup

[    0.922979] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/edp-panel[0]'

[    0.922988] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/edp-panel[0]'

[    0.922997] panel-simple edp-panel: using lookup tables for GPIO lookup

[    0.923006] panel-simple edp-panel: lookup for GPIO enable failed

[    0.923015] panel-simple edp-panel: GPIO lookup for consumer reset

[    0.923023] panel-simple edp-panel: using device tree for GPIO lookup

[    0.923031] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/edp-panel[0]'

[    0.923040] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/edp-panel[0]'

[    0.923048] panel-simple edp-panel: using lookup tables for GPIO lookup

[    0.923056] panel-simple edp-panel: lookup for GPIO reset failed

[    0.923518] mali ff9a0000.gpu: Failed to get regulator

[    0.923539] mali ff9a0000.gpu: Power control initialization failed

[    0.923856] Unable to detect cache hierarchy from DT for CPU 0

[    0.938621] brd: module loaded

[    0.943398] loop: module loaded

[    0.943914] zram: Added device: zram0

[    0.944524] SCSI Media Changer driver v0.25

[    0.945717] rockchip-pinctrl pinctrl: pin gpio1-8 already requested by ff370000.serial; cannot claim for ff1d0000.spi

[    0.945745] rockchip-pinctrl pinctrl: pin-40 (ff1d0000.spi) status -22

[    0.945767] rockchip-pinctrl pinctrl: could not request pin 40 (gpio1-8) from group spi1-tx  on device rockchip-pinctrl

[    0.945794] rockchip-spi ff1d0000.spi: Error applying setting, reverse things back

[    0.945938] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel

[    0.945955] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel

[    0.946576] register spi return v = :0

[    0.946632] tun: Universal TUN/TAP device driver, 1.6

[    0.946643] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    0.947544] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.

[    0.947638] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).

[    0.947658] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).

[    0.947674] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).

[    0.947701] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).

[    0.947870] rk_gmac-dwmac fe300000.ethernet: clock input from PHY

[    0.952890] rk_gmac-dwmac fe300000.ethernet: init for RGMII

[    0.953014] stmmac - user ID: 0x10, Synopsys ID: 0x35

[    0.953025]  Ring mode enabled

[    0.953034]  DMA HW capability register supported

[    0.953044]  Normal descriptors

[    0.953056]  RX Checksum Offload Engine supported (type 2)

[    0.953067]  Wake-Up On Lan supported

[    0.953110]  Enable RX Mitigation via HW Watchdog Timer

[    0.953209] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)

[    1.020745] libphy: stmmac: probed

[    1.020786] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active

[    1.020802] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)

[    1.021684] PPP generic driver version 2.4.2

[    1.021873] PPP BSD Compression module registered

[    1.021889] PPP Deflate Compression module registered

[    1.021921] PPP MPPE Compression module registered

[    1.021939] NET: Registered protocol family 24

[    1.021977] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

[    1.021990] CSLIP: code copyright 1989 Regents of the University of California.

[    1.022059] usbcore: registered new interface driver mt7601u

[    1.022081] Rockchip WiFi SYS interface (V1.00) ...

[    1.022144] usbcore: registered new interface driver catc

[    1.022192] usbcore: registered new interface driver kaweth

[    1.022214] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver

[    1.022255] usbcore: registered new interface driver pegasus

[    1.022298] usbcore: registered new interface driver rtl8150

[    1.022341] usbcore: registered new interface driver r8152

[    1.022356] hso: drivers/net/usb/hso.c: Option Wireless

[    1.022413] usbcore: registered new interface driver hso

[    1.022464] usbcore: registered new interface driver asix

[    1.022508] usbcore: registered new interface driver ax88179_178a

[    1.022552] usbcore: registered new interface driver cdc_ether

[    1.022598] usbcore: registered new interface driver cdc_eem

[    1.022641] usbcore: registered new interface driver dm9601

[    1.022695] usbcore: registered new interface driver smsc75xx

[    1.022745] usbcore: registered new interface driver smsc95xx

[    1.022787] usbcore: registered new interface driver gl620a

[    1.022831] usbcore: registered new interface driver net1080

[    1.022873] usbcore: registered new interface driver plusb

[    1.022920] usbcore: registered new interface driver rndis_host

[    1.022964] usbcore: registered new interface driver cdc_subset

[    1.023009] usbcore: registered new interface driver zaurus

[    1.023053] usbcore: registered new interface driver MOSCHIP usb-ethernet driver

[    1.023110] usbcore: registered new interface driver int51x1

[    1.023156] usbcore: registered new interface driver kalmia

[    1.023199] usbcore: registered new interface driver ipheth

[    1.023245] usbcore: registered new interface driver sierra_net

[    1.023290] usbcore: registered new interface driver cx82310_eth

[    1.023341] usbcore: registered new interface driver cdc_ncm

[    1.023389] usbcore: registered new interface driver qmi_wwan

[    1.023434] usbcore: registered new interface driver cdc_mbim

[    1.024642] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3

[    1.028886] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd

[    1.029536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.029555] ehci-pci: EHCI PCI platform driver

[    1.029615] ehci-platform: EHCI generic platform driver

[    1.033492] ehci-platform fe3c0000.usb: EHCI Host Controller

[    1.033523] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1

[    1.033698] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000

[    1.041378] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00

[    1.041510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.041528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.041542] usb usb1: Product: EHCI Host Controller

[    1.041555] usb usb1: Manufacturer: Linux 4.4.103 ehci_hcd

[    1.041567] usb usb1: SerialNumber: fe3c0000.usb

[    1.042062] hub 1-0:1.0: USB hub found

[    1.042097] hub 1-0:1.0: 1 port detected

[    1.042616] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.042648] ohci-platform: OHCI generic platform driver

[    1.043112] ohci-platform fe3e0000.usb: Generic Platform OHCI controller

[    1.043143] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2

[    1.043272] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000

[    1.098926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    1.098964] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.098981] usb usb2: Product: Generic Platform OHCI controller

[    1.098995] usb usb2: Manufacturer: Linux 4.4.103 ohci_hcd

[    1.099008] usb usb2: SerialNumber: fe3e0000.usb

[    1.099673] hub 2-0:1.0: USB hub found

[    1.099716] hub 2-0:1.0: 1 port detected

[    1.101106] usbcore: registered new interface driver cdc_acm

[    1.101119] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    1.101200] usbcore: registered new interface driver usblp

[    1.101263] usbcore: registered new interface driver cdc_wdm

[    1.101324] usbcore: registered new interface driver uas

[    1.101459] usbcore: registered new interface driver usb-storage

[    1.101516] usbcore: registered new interface driver ums-alauda

[    1.101575] usbcore: registered new interface driver ums-cypress

[    1.101632] usbcore: registered new interface driver ums-datafab

[    1.101686] usbcore: registered new interface driver ums_eneub6250

[    1.101740] usbcore: registered new interface driver ums-freecom

[    1.101795] usbcore: registered new interface driver ums-isd200

[    1.101850] usbcore: registered new interface driver ums-jumpshot

[    1.101903] usbcore: registered new interface driver ums-karma

[    1.101958] usbcore: registered new interface driver ums-onetouch

[    1.102017] usbcore: registered new interface driver ums-sddr09

[    1.102072] usbcore: registered new interface driver ums-sddr55

[    1.102127] usbcore: registered new interface driver ums-usbat

[    1.102235] usbcore: registered new interface driver usbserial

[    1.102285] usbcore: registered new interface driver usbserial_generic

[    1.102324] usbserial: USB Serial support registered for generic

[    1.102381] usbcore: registered new interface driver ch341

[    1.102423] usbserial: USB Serial support registered for ch341-uart

[    1.102481] usbcore: registered new interface driver cp210x

[    1.102522] usbserial: USB Serial support registered for cp210x

[    1.102594] usbcore: registered new interface driver option

[    1.102632] usbserial: USB Serial support registered for GSM modem (1-port)

[    1.102794] usbcore: registered new interface driver pl2303

[    1.102832] usbserial: USB Serial support registered for pl2303

[    1.102905] usbcore: registered new interface driver trancevibrator

[    1.102923] usb20_otg: version 3.10a 21-DEC-2012

[    1.103213] usb20_host: version 3.10a 21-DEC-2012

[    1.103883] usbcore: registered new interface driver xpad

[    1.103957] usbcore: registered new interface driver usb_acecad

[    1.104021] usbcore: registered new interface driver aiptek

[    1.104084] usbcore: registered new interface driver gtco

[    1.104146] usbcore: registered new interface driver hanwang

[    1.104207] usbcore: registered new interface driver kbtab

[    1.104223] ==gsl_ts_init==

[    1.104263] ret=0

[    1.104973] .. rk pwm remotectl v1.1 init

[    1.105290] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0

[    1.105905] sensor_register_slave:mma8452,id=17

[    1.105925] sensor_register_slave:lis3dh,id=7

[    1.105943] sensor_register_slave:mma7660,id=18

[    1.105960] sensor_register_slave:lsm303d,id=22

[    1.105976] sensor_register_slave:gs_mc3230,id=23

[    1.105985] [Gsensor]   gsensor_init

[    1.106002] sensor_register_slave:mpu6880_acc,id=24

[    1.106019] sensor_register_slave:mpu6500_acc,id=25

[    1.106035] sensor_register_slave:lsm330_acc,id=26

[    1.106053] sensor_register_slave:akm8975,id=29

[    1.106069] sensor_register_slave:akm8963,id=30

[    1.106086] sensor_register_slave:l3g4200d,id=44

[    1.106102] sensor_register_slave:l3g20d,id=45

[    1.106119] sensor_register_slave:ewtsa,id=46

[    1.106135] sensor_register_slave:lsm330_gyro,id=50

[    1.106152] sensor_register_slave:cm3217,id=52

[    1.106168] sensor_register_slave:cm3218,id=53

[    1.107126] i2c /dev entries driver

[    1.108644] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!

[    1.108760] fan53555-reg: supplied by vcc5v0_sys

[    1.110697] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!

[    1.110766] fan53555-reg: supplied by vcc5v0_sys

[    1.112913] rk808 0-001b: Pmic Chip id: 0x0

[    1.116399] rk808 0-001b: GPIO lookup for consumer dvs

[    1.116412] rk808 0-001b: using device tree for GPIO lookup

[    1.116426] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'

[    1.116438] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'

[    1.116449] rk808 0-001b: using lookup tables for GPIO lookup

[    1.116460] rk808 0-001b: lookup for GPIO dvs failed

[    1.116472] rk808-regulator rk808-regulator: there is no dvs0 gpio

[    1.116488] rk808 0-001b: GPIO lookup for consumer dvs

[    1.116497] rk808 0-001b: using device tree for GPIO lookup

[    1.116508] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'

[    1.116519] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'

[    1.116530] rk808 0-001b: using lookup tables for GPIO lookup

[    1.116539] rk808 0-001b: lookup for GPIO dvs failed

[    1.116550] rk808-regulator rk808-regulator: there is no dvs1 gpio

[    1.116659] DCDC_REG1: supplied by vcc3v3_sys

[    1.117526] DCDC_REG2: supplied by vcc3v3_sys

[    1.118205] DCDC_REG3: supplied by vcc3v3_sys

[    1.118474] DCDC_REG4: supplied by vcc3v3_sys

[    1.118942] LDO_REG1: supplied by vcc3v3_sys

[    1.120165] LDO_REG2: supplied by vcc3v3_sys

[    1.121196] LDO_REG3: supplied by vcc3v3_sys

[    1.122222] LDO_REG4: supplied by vcc3v3_sys

[    1.123281] LDO_REG5: supplied by vcc3v3_sys

[    1.124314] LDO_REG6: supplied by vcc3v3_sys

[    1.125342] LDO_REG7: supplied by vcc3v3_sys

[    1.126370] LDO_REG8: supplied by vcc3v3_sys

[    1.127426] SWITCH_REG1: supplied by vcc3v3_sys

[    1.127699] SWITCH_REG2: supplied by vcc3v3_sys

[    1.131886] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0

[    1.132453] of_get_named_gpiod_flags: parsed 'pmic,hold-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]' - status (0)

[    1.132515] of_get_named_gpiod_flags: parsed 'pmic,stby-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]' - status (0)

[    1.132569] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80098ac000

[    1.133363] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80098ae000

[    1.133486] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c

[    1.133504] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22

[    1.133520] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xfer  on device rockchip-pinctrl

[    1.133536] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back

[    1.133996] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff80098b0000

[    1.135070] fusb302 4-0022: GPIO lookup for consumer int-n

[    1.135084] fusb302 4-0022: using device tree for GPIO lookup

[    1.135122] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)

[    1.135149] fusb302 4-0022: GPIO lookup for consumer vbus-5v

[    1.135159] fusb302 4-0022: using device tree for GPIO lookup

[    1.135189] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)

[    1.135216] fusb302 4-0022: GPIO lookup for consumer vbus-other

[    1.135227] fusb302 4-0022: using device tree for GPIO lookup

[    1.135238] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'

[    1.135249] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'

[    1.135260] fusb302 4-0022: using lookup tables for GPIO lookup

[    1.135271] fusb302 4-0022: lookup for GPIO vbus-other failed

[    1.135283] fusb302 4-0022: GPIO lookup for consumer discharge

[    1.135292] fusb302 4-0022: using device tree for GPIO lookup

[    1.135303] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'

[    1.135313] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'

[    1.135324] fusb302 4-0022: using lookup tables for GPIO lookup

[    1.135334] fusb302 4-0022: lookup for GPIO discharge failed

[    1.135345] fusb302 4-0022: GPIO lookup for consumer charge-en

[    1.135355] fusb302 4-0022: using device tree for GPIO lookup

[    1.135365] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'

[    1.135376] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'

[    1.135386] fusb302 4-0022: using lookup tables for GPIO lookup

[    1.135397] fusb302 4-0022: lookup for GPIO charge-en failed

[    1.138968] fusb302 4-0022: Can't get property of role, set role to default DRP

[    1.147865] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE

[    1.148045] GSLX680 Enter gsl_ts_probe

[    1.153463] fusb302 4-0022: port 0, state 3

[    1.348028] usb 1-1: new high-speed USB device number 2 using ehci-platform

[    1.364857] fusb302 4-0022: port 0, state 6

[    1.366721] fusb302 4-0022: port 0, state 19

[    1.366732] fusb302 4-0022: CC connected in CC2 as UFP

[    1.369173] fusb302 4-0022: port 0, state 20

[    1.369182] fusb302 4-0022: port        0

[    1.369190] fusb302 4-0022: orientation 1

[    1.369198] fusb302 4-0022: power_role  0

[    1.369205] fusb302 4-0022: data_role   0

[    1.369212] fusb302 4-0022: cc          1

[    1.369219] fusb302 4-0022: pd          0

[    1.369226] fusb302 4-0022: enter_mode  0

[    1.369233] fusb302 4-0022: pin support 0

[    1.369241] fusb302 4-0022: pin def     0

[    1.369248] fusb302 4-0022: attention   0

[    1.370724] fusb302 4-0022: port 0, state 21

[    1.458061] gsl_ts_probe--1305, i2c_master_recv fail

[    1.458261] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80098b2000

[    1.459483] IR NEC protocol handler initialized

[    1.459499] IR RC5(x/sz) protocol handler initialized

[    1.459513] IR RC6 protocol handler initialized

[    1.459527] IR JVC protocol handler initialized

[    1.459541] IR Sony protocol handler initialized

[    1.459555] IR SANYO protocol handler initialized

[    1.459568] IR Sharp protocol handler initialized

[    1.459583] IR MCE Keyboard/mouse protocol handler initialized

[    1.459597] IR XMP protocol handler initialized

[    1.459899] usbcore: registered new interface driver uvcvideo

[    1.459910] USB Video Class driver (1.1.1)

[    1.459929] CamSys driver version: v0.38.0, CamSys head file version: v1.0.0

[    1.471505] __power_supply_register: Expected proper parent device for 'test_ac'

[    1.471736] __power_supply_register: Expected proper parent device for 'test_battery'

[    1.472000] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201

[    1.472018] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[    1.472032] usb 1-1: Product: USB 2.0 Hub [MTT]

[    1.472160] thermal thermal_zone2: power_allocator: sustainable_power will be estimated

[    1.472340] __power_supply_register: Expected proper parent device for 'test_usb'

[    1.472756] hub 1-1:1.0: USB hub found

[    1.472872] hub 1-1:1.0: 7 ports detected

[    1.475933] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647

[    1.482597] device-mapper: uevent: version 1.0.3

[    1.483050] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com

[    1.483307] Bluetooth: HCI UART driver ver 2.3

[    1.483321] Bluetooth: HCI UART protocol H4 registered

[    1.483367] Bluetooth: HCI UART protocol LL registered

[    1.483386] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x

[    1.483398] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2

[    1.483409] rtk_btusb: Register usb char device interface for BT driver

[    1.483702] usbcore: registered new interface driver rtk_btusb

[    1.484277] cpu cpu0: leakage=21

[    1.502113] cpu cpu0: temp=39375, pvtm=144043 (144273 + -230)

[    1.502539] cpu cpu0: pvtm-sel=1

[    1.502948] cpu cpu4: leakage=37

[    1.515266] cpu cpu4: temp=39375, pvtm=151614 (151756 + -142)

[    1.515419] cpu cpu4: pvtm-sel=1

[    1.520958] sdhci: Secure Digital Host Controller Interface driver

[    1.521006] sdhci: Copyright(c) Pierre Ossman

[    1.521025] Synopsys Designware Multimedia Card Interface Driver

[    1.522283] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.

[    1.522446] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.

[    1.522468] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a

[    1.522525] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo

[    1.522567] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.

[    1.522624] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found

[    1.522637] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found

[    1.522659] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp

[    1.522670] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup

[    1.522683] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'

[    1.522694] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'

[    1.522705] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup

[    1.522716] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed

[    1.523829] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.

[    1.523928] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.

[    1.523948] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a

[    1.523999] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo

[    1.524026] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.

[    1.524151] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found

[    1.524176] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd

[    1.524187] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup

[    1.524200] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'

[    1.524211] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'

[    1.524221] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup

[    1.524232] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed

[    1.524245] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp

[    1.524254] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup

[    1.524265] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'

[    1.524276] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'

[    1.524286] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup

[    1.524296] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed

[    1.524484] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done

[    1.524820] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done

[    1.538067] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)

[    1.552518] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized

[    1.552834] sdhci-pltfm: SDHCI platform and OF driver helper

[    1.553350] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp

[    1.553362] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup

[    1.553373] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'

[    1.553383] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'

[    1.553392] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup

[    1.553402] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed

[    1.554642] sdhci-arasan fe330000.sdhci: No vmmc regulator found

[    1.554656] sdhci-arasan fe330000.sdhci: No vqmmc regulator found

[    1.584770] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA

[    1.585794] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power[0]' - status (0)

[    1.585996] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/user[0]' - status (0)

[    1.586467] hidraw: raw HID events driver (C) Jiri Kosina

[    1.591296] usbcore: registered new interface driver usbhid

[    1.591321] usbhid: USB HID core driver

[    1.591669] of_get_named_gpiod_flags: parsed 'irq-gpio' property of node '/i2c@ff3d0000/mpu@68[0]' - status (0)

[    1.591708] inv-mpu-iio 4-0068: int_config=0,level_shifter=0,client.addr=68,client.irq=6b

[    1.591724] inv-mpu-iio 4-0068: 0

[    1.591735] inv-mpu-iio 4-0068: -1

[    1.591746] inv-mpu-iio 4-0068: 0

[    1.591756] inv-mpu-iio 4-0068: -1

[    1.591767] inv-mpu-iio 4-0068: 0

[    1.591777] inv-mpu-iio 4-0068: 0

[    1.591788] inv-mpu-iio 4-0068: 0

[    1.591798] inv-mpu-iio 4-0068: 0

[    1.591809] inv-mpu-iio 4-0068: -1

[    1.591820] inv-mpu-iio 4-0068:

[    1.591828] inv_mpu_iio: secondary_i2c_addr=0

[    1.592322] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    1.633396] mmc1: MAN_BKOPS_EN bit is not set

[    1.648331] mmc1: new HS400 Enhanced strobe MMC card at address 0001

[    1.649563] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB

[    1.650456] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB

[    1.651325] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB

[    1.652190] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB

[    1.652742]      uboot: 0x000400000 -- 0x000800000 (4 MB)

[    1.652756]      trust: 0x000800000 -- 0x000c00000 (4 MB)

[    1.652769]       misc: 0x000c00000 -- 0x001000000 (4 MB)

[    1.652781]   resource: 0x001000000 -- 0x002000000 (16 MB)

[    1.652792]     kernel: 0x002000000 -- 0x003800000 (24 MB)

[    1.652804]       boot: 0x003800000 -- 0x005800000 (32 MB)

[    1.652816]   recovery: 0x005800000 -- 0x007800000 (32 MB)

[    1.652828]     backup: 0x007800000 -- 0x00e800000 (112 MB)

[    1.652840]      cache: 0x00e800000 -- 0x016800000 (128 MB)

[    1.652851]     system: 0x016800000 -- 0x076800000 (1536 MB)

[    1.652863]   metadata: 0x076800000 -- 0x077800000 (16 MB)

[    1.652875] baseparamer: 0x077800000 -- 0x077c00000 (4 MB)

[    1.652887]   userdata: 0x077c00000 -- 0x3a3a00000 (12990 MB)

[    1.652956]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13

[    1.695419] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    1.799045] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    1.873959] fusb302 4-0022: port 0, state 26

[    1.886934] fusb302 4-0022: port 0, state 28

[    1.892677] fusb302 4-0022: port 0, state 29

[    1.901965] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    2.005718] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    2.109044] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    2.212380] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    2.315744] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    2.419051] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    2.522429] inv_mpu_iio: inv_mpu: reset chip failed, err = -6

[    2.582106] fusb302 4-0022: port 0, state 19

[    2.588582] fusb302 4-0022: port 0, state 20

[    2.591675] fusb302 4-0022: port 0, state 21

[    2.729147] i2c i2c-4: inv_mpu_probe failed -6

[    2.729239] inv-mpu-iio: probe of 4-0068 failed with error -5

[    2.729342] inv_mpu_iio: inv_mpu_init:746

[    2.731249] ashmem: initialized

[    2.735841] ff100000.saradc supply vref not found, using dummy regulator

[    2.740420] rknandbase v1.1 2016-11-08

[    2.741901] usbcore: registered new interface driver snd-usb-audio

[    2.745019] rt5640 1-001c: rt5640 have no aux_det_adc_value defined

[    2.745111] of_get_named_gpiod_flags: parsed 'hp-con-gpio' property of node '/i2c@ff110000/rt5640@1c[0]' - status (0)

[    2.745175] of_get_named_gpiod_flags: can't parse 'hp-det-gpio' property of node '/i2c@ff110000/rt5640@1c[0]'

[    2.745198] rt5640 1-001c: Can not read property hp-con-gpio

[    2.745224] rt5640 1-001c: Can not read property: linein-mute.

[    2.745251] of_get_named_gpiod_flags: can't parse 'realtek,ldo1-en-gpios' property of node '/i2c@ff110000/rt5640@1c[0]'

[    2.773907] u32 classifier

[    2.774231]     Actions configured

[    2.774735] Netfilter messages via NETLINK v0.30.

[    2.775329] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[    2.776733] ctnetlink v0.93: registering with nfnetlink.

[    2.778888] xt_time: kernel timezone is -0000

[    2.781966] ip_tables: (C) 2000-2006 Netfilter Core Team

[    2.782881] arp_tables: (C) 2002 David S. Miller

[    2.784727] Initializing XFRM netlink socket

[    2.785811] NET: Registered protocol family 10

[    2.787509] mip6: Mobile IPv6

[    2.787819] ip6_tables: (C) 2000-2006 Netfilter Core Team

[    2.791859] sit: IPv6 over IPv4 tunneling driver

[    2.792797] NET: Registered protocol family 17

[    2.793228] NET: Registered protocol family 15

[    2.793668] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.

[    2.796972] Bridge firewalling registered

[    2.797353] Ebtables v2.0 registered

[    2.798243] Bluetooth: RFCOMM TTY layer initialized

[    2.798706] Bluetooth: RFCOMM socket layer initialized

[    2.799209] Bluetooth: RFCOMM ver 1.11

[    2.799570] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[    2.800057] Bluetooth: BNEP filters: protocol multicast

[    2.800537] Bluetooth: BNEP socket layer initialized

[    2.800995] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    2.801539] Bluetooth: HIDP socket layer initialized

[    2.802048] l2tp_core: L2TP core driver, V2.0

[    2.802086] l2tp_ppp: PPPoL2TP kernel driver, V2.0

[    2.802102] [WLAN_RFKILL]: Enter rfkill_wlan_init

[    2.802575] [WLAN_RFKILL]: Enter rfkill_wlan_probe

[    2.802662] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s

[    2.802672] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.

[    2.802681] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.

[    2.802693] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'

[    2.802701] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'

[    2.802710] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'

[    2.802764] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)

[    2.802772] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.

[    2.802781] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio

[    2.802794] [WLAN_RFKILL]: Exit rfkill_wlan_probe

[    2.802863] [BT_RFKILL]: Enter rfkill_rk_init

[    2.803366] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)

[    2.803376] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.

[    2.803390] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'

[    2.803415] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)

[    2.803423] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.

[    2.803449] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)

[    2.803457] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.

[    2.803482] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)

[    2.803489] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.

[    2.804104] [BT_RFKILL]: Request irq for bt wakeup host

[    2.804169] [BT_RFKILL]: ** disable irq

[    2.804318] [BT_RFKILL]: bt_default device registered.

[    2.804804] sensor_register_slave:mpu6880_gyro,id=49

[    2.806472] Registered cp15_barrier emulation handler

[    2.806648] Registered setend emulation handler

[    2.807446] registered taskstats version 1

[    2.808775] rockchip ion idev is NULL

[    2.808793] rga2 ff680000.rga: rga ion client create success!

[    2.809057] rga: Driver loaded successfully ver:3.02

[    2.810719] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: GPIO lookup for consumer otg-vbus

[    2.810732] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: using device tree for GPIO lookup

[    2.810744] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpios' property of node '/syscon@ff770000/usb2-phy@e450[0]'

[    2.810754] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpio' property of node '/syscon@ff770000/usb2-phy@e450[0]'

[    2.810763] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: using lookup tables for GPIO lookup

[    2.810773] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: lookup for GPIO otg-vbus failed

[    2.810783] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned

[    2.813514] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)

[    2.813765] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)

[    2.813999] rockchip-dp ff970000.edp: failed to get vcc regulator: -19

[    2.814011] rockchip-dp ff970000.edp: failed to get vccio regulator: -19

[    2.814089] rockchip-dp ff970000.edp: no DP phy configured

[    2.814124] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/edp@ff970000[0]'

[    2.814134] of_get_named_gpiod_flags: can't parse 'samsung,hpd-gpio' property of node '/edp@ff970000[0]'

[    2.850486] vendor storage:20160801 ret = 0

[    2.860643] rockchip-drm display-subsystem: bound ff970000.edp (ops rockchip_dp_component_ops)

[    2.861914] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports

[    2.862540] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver

[    2.863313] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)

[    2.866244] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)

[    2.867488] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports

[    2.868702] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn

[    2.869487] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)

[    2.870217] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    2.870939] [drm:drm_vblank_init] No driver support for vblank timestamp query.

[    2.906756] rockchip-drm display-subsystem: fb0:  frame buffer device

[    2.920710] mali ff9a0000.gpu: leakage=25

[    2.934074] mali ff9a0000.gpu: temp=40000, pvtm=121299 (121345 + -46)

[    2.935560] mali ff9a0000.gpu: pvtm-sel=1

[    2.937245] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0

[    2.938579] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 284; [Func] : kbase_devfreq_init(); success initing power_model_simple.

[    2.940061] mali ff9a0000.gpu: Probed as mali0

[    2.945324] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller

[    2.945462] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 3

[    2.946044] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010

[    2.946150] xhci-hcd xhci-hcd.10.auto: irq 234, io mem 0xfe800000

[    2.946490] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

[    2.946523] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.946550] usb usb3: Product: xHCI Host Controller

[    2.946575] usb usb3: Manufacturer: Linux 4.4.103 xhci-hcd

[    2.946599] usb usb3: SerialNumber: xhci-hcd.10.auto

[    2.947831] hub 3-0:1.0: USB hub found

[    2.947918] hub 3-0:1.0: 1 port detected

[    2.948594] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller

[    2.948639] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 4

[    2.948797] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.

[    2.949052] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003

[    2.949084] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.949111] usb usb4: Product: xHCI Host Controller

[    2.949135] usb usb4: Manufacturer: Linux 4.4.103 xhci-hcd

[    2.949159] usb usb4: SerialNumber: xhci-hcd.10.auto

[    2.950369] hub 4-0:1.0: USB hub found

[    2.950454] hub 4-0:1.0: 1 port detected

[    2.954121] xhci-hcd xhci-hcd.10.auto: remove, state 1

[    2.954187] usb usb4: USB disconnect, device number 1

[    2.978863] xhci-hcd xhci-hcd.10.auto: Host not halted after 16000 microseconds.

[    2.978945] xhci-hcd xhci-hcd.10.auto: Host controller not halted, aborting reset.

[    2.980482] xhci-hcd xhci-hcd.10.auto: USB bus 4 deregistered

[    2.981014] xhci-hcd xhci-hcd.10.auto: remove, state 1

[    2.981497] usb usb3: USB disconnect, device number 1

[    2.982577] xhci-hcd xhci-hcd.10.auto: USB bus 3 deregistered

[    2.989099] rockchip-dwc3 usb@fe800000: USB peripheral connected

[    2.989904] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller

[    2.990438] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 3

[    2.991547] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010

[    2.992383] xhci-hcd xhci-hcd.11.auto: irq 235, io mem 0xfe900000

[    2.993087] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

[    2.993707] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.994360] usb usb3: Product: xHCI Host Controller

[    2.994809] usb usb3: Manufacturer: Linux 4.4.103 xhci-hcd

[    2.995311] usb usb3: SerialNumber: xhci-hcd.11.auto

[    2.996398] hub 3-0:1.0: USB hub found

[    2.996773] hub 3-0:1.0: 1 port detected

[    2.997421] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller

[    2.997943] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 4

[    2.998700] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.

[    2.999512] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003

[    2.999531] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.999542] usb usb4: Product: xHCI Host Controller

[    2.999552] usb usb4: Manufacturer: Linux 4.4.103 xhci-hcd

[    2.999562] usb usb4: SerialNumber: xhci-hcd.11.auto

[    3.002535] hub 4-0:1.0: USB hub found

[    3.002575] hub 4-0:1.0: 1 port detected

[    3.005691] ehci-platform fe380000.usb: EHCI Host Controller

[    3.005727] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5

[    3.005983] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000

[    3.014733] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00

[    3.014893] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002

[    3.014907] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.014918] usb usb5: Product: EHCI Host Controller

[    3.014929] usb usb5: Manufacturer: Linux 4.4.103 ehci_hcd

[    3.014939] usb usb5: SerialNumber: fe380000.usb

[    3.018458] hub 5-0:1.0: USB hub found

[    3.018499] hub 5-0:1.0: 1 port detected

[    3.019352] ohci-platform fe3a0000.usb: Generic Platform OHCI controller

[    3.019382] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6

[    3.019581] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000

[    3.075621] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001

[    3.075648] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.075662] usb usb6: Product: Generic Platform OHCI controller

[    3.075675] usb usb6: Manufacturer: Linux 4.4.103 ohci_hcd

[    3.075688] usb usb6: SerialNumber: fe3a0000.usb

[    3.078843] hub 6-0:1.0: USB hub found

[    3.078893] hub 6-0:1.0: 1 port detected

[    3.080466] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.

[    3.080594] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.

[    3.080615] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a

[    3.080656] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo

[    3.080684] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.

[    3.080741] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found

[    3.080754] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found

[    3.080778] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp

[    3.080788] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup

[    3.080802] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'

[    3.080813] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'

[    3.080824] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup

[    3.080835] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed

[    3.081090] platform sdio-pwrseq: GPIO lookup for consumer reset

[    3.081101] platform sdio-pwrseq: using device tree for GPIO lookup

[    3.081132] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)

[    3.081168] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq

[    3.093949] fusb302 4-0022: port 0, state 28

[    3.098184] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)

[    3.098907] fusb302 4-0022: port 0, state 29

[    3.111462] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized

[    3.112246] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'

[    3.112263] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'

[    3.113118] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok

[    3.115754] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/rt5640-sound[0]'

[    3.115782] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/rt5640-sound[0]'

[    3.129621] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok

[    3.135762] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1

[    3.137856] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'

[    3.137880] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'

[    3.139895] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok

[    3.141871] otg_wakelock_init: No USB transceiver found

[    3.143685] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:05 UTC (1358499005)

[    3.146600] It doesn't contain Rogue gpu

[    3.156434] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)

[    3.158147] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

[    3.159836] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

[    3.162834] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)

[    3.166432] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)

[    3.178149] ret 1024

[    3.179167] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '09:29:49', on 'Apr 20 2021'.

[    3.181429] Mali: Mali device driver loaded

[    3.182176] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)

[    3.182201] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)

[    3.182375] input: rk29-keypad as /devices/platform/rockchip-key/input/input2

[    3.184308] ALSA device list:

[    3.184606]   #0: rockchip,hdmi

[    3.184907]   #1: rockchip,rt5640-codec

[    3.185266]   #2: ROCKCHIP,SPDIF

[    3.186071] Freeing unused kernel memory: 832K

[    3.188739] init: init first stage started!

[    3.190439] init: init second stage started!

[    3.193287] init: Setting ro.rk.soc=rk3399

[    3.193762] init: OK,EMMC DRIVERS INIT OK

[    3.194154] init: property_set("ro.boot.mode", "emmc") failed

[    3.194778] init: property_set("ro.hardware", "rk30board") failed

[    3.195378] init: Running restorecon...

[    3.195860] init: waitpid failed: No child processes

[    3.196662] init: (Loading properties from /default.prop took 0.00s.)

[    3.199000] init: /init.rc: 588: invalid keyword 'echo'

[    3.199968] init: (Parsing /init.environ.rc took 0.00s.)

[    3.200930] init: (Parsing /init.usb.rc took 0.00s.)

[    3.202560] init: (Parsing init.rk30board.bootmode.emmc.rc took 0.00s.)

[    3.204059] init: (Parsing init.rk30board.usb.rc took 0.00s.)

[    3.204633] init: (Parsing init.rk30board.environment.rc took 0.00s.)

[    3.205300] init: could not import file '/init.stt_trace.rc' from '/init.debug.rc': No such file or directory

[    3.206384] init: (Parsing /init.logs.rc took 0.00s.)

[    3.206937] init: (Parsing /init.crashlogd.rc took 0.00s.)

[    3.207523] init: (Parsing /init.coredump.rc took 0.00s.)

[    3.208095] init: (Parsing /init.log-watch.rc took 0.00s.)

[    3.208654] init: (Parsing /init.kernel.rc took 0.00s.)

[    3.209239] init: (Parsing /init.debug-charging.rc took 0.00s.)

[    3.209784] init: (Parsing /init.debug.rc took 0.00s.)

[    3.210268] init: (Parsing init.rockchip.rc took 0.01s.)

[    3.211323] init: (Parsing init.connectivity.rc took 0.00s.)

[    3.212078] init: (Parsing init.box.samba.rc took 0.00s.)

[    3.212696] init: (Parsing init.rk3399.rc took 0.00s.)

[    3.213296] init: init.box.rc: 25: invalid keyword 'ioprio'

[    3.213827] init: (Parsing init.box.rc took 0.00s.)

[    3.214314] init: could not import file 'init.car.rc' from '/init.rk30board.rc': No such file or directory

[    3.214356] init: could not import file 'init.optee.rc' from '/init.rk30board.rc': No such file or directory

[    3.214378] init: (Parsing /init.rk30board.rc took 0.01s.)

[    3.217446] init: (Parsing /init.usb.configfs.rc took 0.00s.)

[    3.217578] init: (Parsing /init.zygote64_32.rc took 0.00s.)

[    3.217598] init: (Parsing /init.rc took 0.02s.)

[    3.217654] mmc_host mmc2: Bus speed (slot 0) = 200000000Hz (slot req 208000000Hz, actual 200000000HZ div = 0)

[    3.217988] init: Starting service 'ueventd'...

[    3.219455] init: write_file: Unable to open '/proc/self/coredump_filter': No such file or directory

[    3.219514] init: write_file: Unable to open '/proc/sys/kernel/panic_on_stackoverflow': No such file or directory

[    3.223250] ueventd: ueventd started!

[    3.224909] ueventd: invalid gid 'trace'

[    3.263871] init: Waiting for /dev/.coldboot_done...

[    3.329701] ueventd: Coldboot took 0.10s.

[    3.335130] init: Waiting for /dev/.coldboot_done took 0.07s.

[    3.335257] init: /dev/hw_random not found

[    3.335883] keychord: using input dev ff420030.pwm for fevent

[    3.335892] keychord: using input dev rk29-keypad for fevent

[    3.340565] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory

[    3.348284] Registered swp emulation handler

[    3.348478] init: write_file: Unable to open '/sys/module/rockchip_pm/parameters/policy': No such file or directory

[    3.348980] init: /dev/hw_random not found

[    3.349107] init: write_file: Unable to open '/sys/block/mmcblk0/bdi/read_ahead_kb': No such file or directory

[    3.349708] fs_mgr: Warning: unknown flag resize

[    3.352972] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc

[    3.353812] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/system,target=/system,type=ext4)=0

[    3.355440] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/cache,/cache,ext4)=-1: No such file or directory

[    3.356979] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/cache

[    3.363616] random: e2fsck: uninitialized urandom read (40 bytes read, 52 bits of entropy available)

[    3.401507] e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[    3.401507]

[    3.402088] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: recovering journal

[    3.402088]

[    3.402935] e2fsck: Superblock last mount time is in the future.

[    3.402935]

[    3.403603] e2fsck: (by less than a day, probably due to the hardware clock being incorrectly set)  Fix? yes

[    3.403603]

[    3.404612] e2fsck:

[    3.404612]

[    3.404953] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: clean, 21/8192 files, 1591/32768 blocks (check in 3 mounts)

[    3.404953]

[    3.408586] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard

[    3.408663] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/cache,target=/cache,type=ext4)=0

[    3.409270] EXT4-fs (mmcblk1p11): Ignoring removed nomblk_io_submit option

[    3.411733] EXT4-fs (mmcblk1p11): recovery complete

[    3.411757] EXT4-fs (mmcblk1p11): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit

[    3.411810] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/metadata,/metadata,ext4)=0: Success

[    3.426316] fs_mgr: check_fs(): unmount(/metadata) succeeded

[    3.426362] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/metadata

[    3.428238] random: e2fsck: uninitialized urandom read (40 bytes read, 56 bits of entropy available)

[    3.436943] e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[    3.436943]

[    3.437013] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks (check in 2 mounts)

[    3.437013]

[    3.439633] EXT4-fs (mmcblk1p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard

[    3.439702] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/metadata,target=/metadata,type=ext4)=0

[    3.439773] fs_mgr: Running /system/bin/fsck.f2fs -a /dev/block/platform/fe330000.sdhci/by-name/userdata

[    3.442292] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory

[    3.442292]

[    3.442324] fsck.f2fs: fsck.f2fs terminated by exit(255)

[    3.442324]

[    3.493083] F2FS-fs (mmcblk1p13): recover_inode: ino = 9c0, name = mediacenter.db-wal

[    3.493218] F2FS-fs (mmcblk1p13): recover_data: ino = 9c0 (i_size: recover) recovered = 3, err = 0

[    3.493232] F2FS-fs (mmcblk1p13): recover_inode: ino = 9c2, name = shortcuts.xml

[    3.495175] F2FS-fs (mmcblk1p13): recover_dentry: ino = 9c2, name = shortcuts.xml, dir = 46a, err = 0

[    3.495202] F2FS-fs (mmcblk1p13): recover_data: ino = 9c2 (i_size: recover) recovered = 0, err = 0

[    3.495212] F2FS-fs (mmcblk1p13): recover_inode: ino = 9c0, name = mediacenter.db-wal

[    3.495263] F2FS-fs (mmcblk1p13): recover_data: ino = 9c0 (i_size: recover) recovered = 2, err = 0

[    3.495274] F2FS-fs (mmcblk1p13): recover_inode: ino = 9c3, name = drop189.tmp

[    3.495889] F2FS-fs (mmcblk1p13): recover_dentry: ino = 9c3, name = drop189.tmp, dir = 5a, err = 0

[    3.495926] F2FS-fs (mmcblk1p13): recover_data: ino = 9c3 (i_size: recover) recovered = 0, err = 0

[    3.498564] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/userdata,target=/data,type=f2fs)=0

[    3.501597] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)

[    3.501872] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)

[    3.502073] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)

[    3.502365] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)

[    3.502584] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)

[    3.502771] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)

[    3.502960] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)

[    3.503170] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)

[    3.503445] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)

[    3.503646] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)

[    3.503875] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)

[    3.504084] init: (Parsing /system/etc/init/installd.rc took 0.00s.)

[    3.504293] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)

[    3.504503] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)

[    3.504923] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)

[    3.505206] init: (Parsing /system/etc/init/logd.rc took 0.00s.)

[    3.505423] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)

[    3.505616] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)

[    3.505805] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)

[    3.506011] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)

[    3.506217] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)

[    3.506420] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)

[    3.506614] init: (Parsing /system/etc/init/netd.rc took 0.00s.)

[    3.506802] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)

[    3.506998] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)

[    3.507217] init: ignored duplicate definition of service 'ril-daemon'init: (Parsing /system/etc/init/rild.rc took 0.00s.)

[    3.507470] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)

[    3.507679] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)

[    3.507910] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)

[    3.508168] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)

[    3.508429] init: (Parsing /system/etc/init/vold.rc took 0.00s.)

[    3.509483] init: property_set("ro.board.platform", "rk3399") failed

[    3.509868] init: property_set("ro.rk.screenoff_time", "2147483647") failed

[    3.510026] init: property_set("ro.rk.screenshot_enable", "true") failed

[    3.510132] init: (Loading properties from /system/build.prop took 0.00s.)

[    3.510172] init: (Loading properties from /vendor/build.prop took 0.00s.)

[    3.510205] init: (Loading properties from /factory/factory.prop took 0.00s.)

[    3.510297] fs_mgr: Warning: unknown flag resize

[    3.510379] init: /recovery not specified in fstab

[    3.510474] init: Starting service 'healthd'...

[    3.510855] init: cannot find '/system/bin/displayd' (No such file or directory), disabling 'displayd'

[    3.511430] init: Starting service 'earlylogs'...

[    3.511854] init: Starting service 'zygote'...

[    3.512138] init: Starting service 'zygote_secondary'...

[    3.512451] init: Starting service 'lmkd'...

[    3.512817] init: Starting service 'servicemanager'...

[    3.513283] init: Starting service 'surfaceflinger'...

[    3.514276] init: Starting service 'vold'...

[    3.514989] binder: 202:202 transaction failed 29189/-22, size 0-0 line 2951

[    3.516123] random: surfaceflinger: uninitialized urandom read (40 bytes read, 62 bits of entropy available)

[    3.516357] random: elogs.sh: uninitialized urandom read (40 bytes read, 62 bits of entropy available)

[    3.516443] random: lmkd: uninitialized urandom read (40 bytes read, 62 bits of entropy available)

[    3.520181] init: insmod: open("/system/lib/modules/ump.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali_kbase.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/rk30_mirroring.ko") failed: No such file or directory

[    3.520413] random: servicemanager: uninitialized urandom read (40 bytes read, 63 bits of entropy available)

[    3.522927] init: finit_module for "/system/lib/modules/rk29-ipp.ko" failed: Exec format errorinit: Service 'earlylogs' (pid 203) exited with status 0

[    3.523204] init: insmod: open("/system/lib/modules/pvrsrvkm.ko") failed: No such file or directoryinit: finit_module for "/drmboot.ko" failed: Exec format errorfs_mgr: Warning: unknown flag resize

[    3.523839] random: vold: uninitialized urandom read (40 bytes read, 63 bits of entropy available)

[    3.524230] random: app_process64: uninitialized urandom read (40 bytes read, 63 bits of entropy available)

[    3.524858] zram0: detected capacity change from 0 to 533413888

[    3.526076] random: app_process32: uninitialized urandom read (40 bytes read, 63 bits of entropy available)

[    3.528354] random: mkswap: uninitialized urandom read (40 bytes read, 63 bits of entropy available)

[    3.548259] Adding 520908k swap on /dev/block/zram0.  Priority:-1 extents:1 across:520908k SS

[    3.549395] init: Starting service 'debuggerd'...

[    3.549959] init: Starting service 'debuggerd64'...

[    3.552940] init: Not bootcharting.

[    3.608382] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 245

[    3.609633] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)

[    3.609661] mmc2: new ultra high speed SDR104 SDIO card at address 0001

[    3.787424] fusb302 4-0022: port 0, state 19

[    3.789266] fusb302 4-0022: port 0, state 20

[    3.790630] fusb302 4-0022: port 0, state 21

[    3.820112] fs_mgr: Warning: unknown flag resize

[    3.874069] init: Failed to reload policy

[    3.874223] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...

[    3.881500] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 224) exited with status 0

[    3.888477] init: write_file: Unable to open '/proc/sys/kernel/core_pattern': No such file or directory

[    3.888740] init: (Loading properties from /data/local.prop took 0.00s.)

[    3.897384] init: Starting service 'logd'...

[    3.897739] init: Starting service 'logd-reinit'...

[    3.898617] init: write_file: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory

[    3.900194] init: write_file: Unable to open '/proc/sys/vm/lazy_vfree_tlb_flush_all_threshold': No such file or directory

[    3.901489] init: Starting service 'fsud'...

[    3.921916] init: Starting service 'vm_daemon'...

[    3.922673] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'

[    3.922696] init: write: cannot expand '${ro.serialno}'

[    3.922935] file system registered

[    3.927067] using random self ethernet address

[    3.927119] using random host ethernet address

[    3.927200] init: write_file: Unable to open '/config/usb_gadget/g1/functions/rndis.gs4/wceis': Permission denied

[    3.931751] init: Starting service 'console'...

[    3.932668] init: Starting service 'adbd'...

[    3.935424] init: Starting service 'ap_log_srv'...

[    3.936079] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 2 (/system/bin/update_verifier)'

[    3.936190] init: Starting service 'ril-daemon'...

[    3.936593] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'

[    3.936648] init: Starting service 'drmservice'...

[    3.937269] init: cannot find '/system/bin/bplus_helper' (No such file or directory), disabling 'bplus_helper'

[    3.937313] init: Starting service 'up_eth0'...

[    3.937788] init: cannot find '/system/bin/rk_store_keybox' (No such file or directory), disabling 'rk_store_keybox'

[    3.937865] init: Starting service 'akmd'...

[    3.941809] init: Starting service 'audioserver'...

[    3.942680] init: Starting service 'cameraserver'...

[    3.943238] init: Starting service 'drm'...

[    3.943712] init: Starting service 'installd'...

[    3.944588] init: Starting service 'keystore'...

[    3.949615] init: Starting service 'mediacodec'...

[    3.950319] init: Starting service 'mediadrm'...

[    3.950668] init: couldn't write 261 to /dev/cpuset/camera-daemon/tasks: No such file or directory

[    3.950917] init: Starting service 'mediaextractor'...

[    3.952422] rk_gmac-dwmac fe300000.ethernet: rk_get_eth_addr: mac address: 5a:db:d5:39:cc:de

[    3.952456] eth0: device MAC address 5a:db:d5:39:cc:de

[    3.952934] logd.auditd: start

[    3.953022] logd.klogd: 3951653956

[    3.961813] init: Starting service 'media'...

[    3.962527] init: Starting service 'netd'...

[    3.963866] init: Starting service 'crashlogd'...

[    3.964454] init: Starting service 'log-watch'...

[    3.968838] init: Starting service 'gatekeeperd'...

[    3.969358] init: Starting service 'perfprofd'...

[    3.980759] logd.daemon: reinit

[    3.989829] init: Service 'logd-reinit' (pid 239) exited with status 0

[    3.989910] init: Service 'up_eth0' (pid 257) exited with status 0

[    3.989998] init: Service 'akmd' (pid 259) exited with status 254

[    3.990374] ret = ffffffffffffffff

[    3.993449] init: property 'sys.serialno' doesn't exist while expanding '${sys.serialno}'

[    3.993476] init: setprop: cannot expand '${sys.serialno}'

[    3.996408] init: Service 'drmservice' (pid 256) exited with status 0

[    4.090643] init: Starting service 'apk_logfs'...

[    4.092938] init: Service 'ap_log_srv' (pid 254) exited with status 0

[    4.154822] read descriptors

[    4.154851] read strings

[    4.292043] fusb302 4-0022: port 0, state 0

[    4.292056] fusb302 4-0022: PD disabled

[    4.392336] init: Starting service 'bootanim'...

[    4.419211] android_work: sent uevent USB_STATE=CONNECTED

[    4.439331] configfs-gadget gadget: high-speed config #1: b

[    4.439467] android_work: sent uevent USB_STATE=CONFIGURED

[    4.476336] Freeing drm_logo memory: 488K

[    4.500486] init: Untracked pid 330 exited with status 0

[    4.516113] healthd: BatteryCurrentNowPath not found

[    4.516142] healthd: BatteryCycleCountPath not found

[    4.557630] init: Untracked pid 340 exited with status 0

[    4.808277] random: nonblocking pool is initialized

[    4.924088] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    4.924108] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    4.935647] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    4.935835] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    4.945867] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    4.945888] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    4.945894] gpio-54 (camsys_gpio): gpiod_request: status -16

[    4.946149] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    4.946171] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    4.946180] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    4.946190] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    4.946197] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    4.958622] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    4.958811] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    4.975328] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    4.975399] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    4.975413] gpio-54 (camsys_gpio): gpiod_request: status -16

[    4.990794] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    4.990982] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.003734] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.003767] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.003774] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.003849] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    5.003899] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    5.003909] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    5.003922] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    5.003929] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    5.016821] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.017007] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.046270] E:camsys_i2c_write(84): i2c write dev(addr:0x78) failed!,err = -6

[    5.073658] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    5.073697] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    5.073704] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.084694] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.084920] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.095332] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.095363] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.095370] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.095425] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    5.095467] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    5.095478] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    5.095490] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    5.095535] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    5.106799] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.107132] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.117573] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    5.117607] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    5.117613] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.130663] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.131037] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.143802] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.143835] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.143842] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.143899] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    5.143942] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    5.143951] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    5.143961] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    5.144005] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    5.157016] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.157211] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.184071] E:camsys_i2c_write(84): i2c write dev(addr:0x78) failed!,err = -6

[    5.212343] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    5.212382] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    5.212389] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.225290] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.225511] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.237078] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.237111] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.237118] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.237175] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    5.237217] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    5.237226] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    5.237236] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    5.237280] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    5.248267] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.248491] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.259128] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    5.259163] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    5.259170] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.273160] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.273381] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.286247] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.286281] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    5.286288] gpio-54 (camsys_gpio): gpiod_request: status -16

[    5.286343] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    5.286386] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    5.286396] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    5.286406] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    5.286449] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    5.299930] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    5.300306] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    5.331395] E:camsys_i2c_write(84): i2c write dev(addr:0x78) failed!,err = -6

[    5.812378] capability: warning: `main' uses 32-bit capabilities (legacy support in use)

[    6.535394] init: property_set("ro.build.fingerprint", "rockchip/rk3399_firefly_edp_box/rk3399_firefly_edp_box:7.1.2/NHG47K/eng.nvt04573.20210420.093529:userdebug/test-keys") failed

[    8.263007] acc_open

[    8.263045] acc_release

[    9.140288] phy phy-ff770000.syscon:usb2-phy@e450.6: charger = USB_CDP_CHARGER

[    9.244110] android_work: sent uevent USB_STATE=DISCONNECTED

[    9.245110] configfs-gadget gadget: unbind function 'mtp'/ffffffc079d3d600

[    9.245145] configfs-gadget gadget: unbind function 'Function FS Gadget'/ffffffc0760dda38

[    9.245201] android_work: did not send uevent (0 0           (null))

[    9.418752] dwhdmi-rockchip ff940000.hdmi: Rate 0 missing; compute N dynamically

[    9.451388] android_work: did not send uevent (0 0           (null))

[    9.500351] android_work: sent uevent USB_STATE=CONNECTED

[    9.519580] configfs-gadget gadget: high-speed config #1: b

[    9.519752] android_work: sent uevent USB_STATE=CONFIGURED

[    9.662291] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.662310] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.662316] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.673061] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.673235] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.686244] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.686277] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.686284] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.686516] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    9.686600] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    9.686633] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    9.686658] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    9.686747] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    9.699057] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.699314] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.709728] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.709761] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.709768] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.722843] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.723535] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.736830] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.736864] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.736872] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.736937] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    9.736986] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    9.736996] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    9.737009] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    9.737059] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    9.749999] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.750202] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.779013] E:camsys_i2c_write(84): i2c write dev(addr:0x78) failed!,err = -6

[    9.809351] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.809381] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.809388] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.820977] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.821232] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.833286] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.833335] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.833343] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.833469] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    9.833511] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    9.833527] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    9.833541] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    9.833609] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    9.848843] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.849431] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.859967] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.860001] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.860007] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.873214] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.874511] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.888268] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.888298] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.888305] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.888357] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    9.889296] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    9.889310] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    9.889320] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    9.889363] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[    9.905392] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.906069] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.933938] E:camsys_i2c_write(84): i2c write dev(addr:0x78) failed!,err = -6

[    9.973614] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.973646] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[    9.973652] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.984966] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[    9.985728] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[    9.997069] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.997112] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[    9.997120] gpio-54 (camsys_gpio): gpiod_request: status -16

[    9.997178] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[    9.998163] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[    9.998204] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[    9.998216] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[    9.998275] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[   10.011883] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[   10.012583] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[   10.023655] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[   10.023684] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff910000[0]' - status (0)

[   10.023691] gpio-54 (camsys_gpio): gpiod_request: status -16

[   10.036894] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[   10.037573] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[   10.051946] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[   10.052002] of_get_named_gpiod_flags: parsed 'rockchip,gpios' property of node '/isp@ff920000[0]' - status (0)

[   10.052010] gpio-54 (camsys_gpio): gpiod_request: status -16

[   10.052110] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp

[   10.053073] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22

[   10.053660] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl

[   10.054641] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back

[   10.054761] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!

[   10.069538] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6

[   10.070276] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6

[   10.098083] E:camsys_i2c_write(84): i2c write dev(addr:0x78) failed!,err = -6

[   10.748706] init: cannot find '/system/bin/glgps' (No such file or directory), disabling 'gpsd'

[   10.748938] init: Starting service 'mode_switch'...

[   10.750268] init: Starting service 'exec 3 (/system/bin/bootstat)'...

[   10.765913] init: Service 'exec 3 (/system/bin/bootstat)' (pid 1030) exited with status 0

[   10.766940] init: Starting service 'exec 4 (/system/bin/bootstat)'...

[   10.782992] init: Service 'exec 4 (/system/bin/bootstat)' (pid 1039) exited with status 0

[   10.783271] init: Starting service 'exec 5 (/system/bin/bootstat)'...

[   10.786853] init: Service 'mode_switch' (pid 1029) exited with status 1

[   10.796255] init: Service 'exec 5 (/system/bin/bootstat)' (pid 1042) exited with status 0

[   10.796475] init: Starting service 'exec 6 (/system/bin/bootstat)'...

[   10.814177] init: Service 'exec 6 (/system/bin/bootstat)' (pid 1043) exited with status 0

[   12.608413] init: Service 'bootanim' is being killed...

[   12.668524] init: Service 'bootanim' (pid 319) killed by signal 9

[   13.211044] init: Untracked pid 1258 exited with status 0

[   13.246108] init: Untracked pid 1266 exited with status 0

[   13.735810] mtp_open

[   14.011034] init: Untracked pid 1261 exited with status 0

[   14.015226] init: Untracked pid 1269 exited with status 0