Firefly开源社区

12
发表新贴
打印 上一主题 下一主题

[Linux] rv1126使用buildroot生成的rootfs,启动报错

46

积分

0

威望

0

贡献

技术小白

积分
46
发表于 2021-6-7 18:47:50        只看该作者  11#
板蓝根 发表于 2021-6-7 14:50
最关键那一段没有截取到呀,我要看出厂固件版本,请进入串口窗口后在掉电上电重启,再截取 log

刚才从官方固件地址下载固件文件后,全部分区做了升级,板子启动串口没有任何输出了。
请问这怎么处理?
回复

使用道具 举报

1万

积分

14

威望

13

贡献

管理员

Rank: 9Rank: 9Rank: 9

积分
11182

优秀版主

发表于 2021-6-7 22:10:00        只看该作者  12#
正常升级的话串口不会没有输出,请试试能否正常进入升级模式,如果不可以需要进入 Maskrom 模式抢救。
1. 如果版本比较新的板子,通过短路表面预留的两个焊盘,重新上电就可以进入 Maskrom 重新升级了。如果不行请尝试需要如附件所示位置飞线然后短接地,然后重新上电,就可以进入 Maskrom
2. 如果上述方法都不行,或者不具备条件,可以寄回检测,如果只是烧错 loader 导致的寄回重新刷出厂固件就可以恢复了

微信图片_20210607140520.jpg (121.82 KB, 下载次数: 865)

微信图片_20210607140520.jpg
回复

使用道具 举报

46

积分

0

威望

0

贡献

技术小白

积分
46
发表于 2021-6-7 22:43:12        只看该作者  13#
板蓝根 发表于 2021-6-7 22:10
正常升级的话串口不会没有输出,请试试能否正常进入升级模式,如果不可以需要进入 Maskrom 模式抢救。
1.  ...

升级之前要先擦除flash?这一步是必须的吗?
回复

使用道具 举报

1万

积分

14

威望

13

贡献

管理员

Rank: 9Rank: 9Rank: 9

积分
11182

优秀版主

发表于 2021-6-8 09:02:21        只看该作者  14#
Eric.Z 发表于 2021-6-7 22:43
升级之前要先擦除flash?这一步是必须的吗?

重来没有说过必须擦除,Maskrom 只是防止设备因为不当操作变砖的最后抢救方法
回复

使用道具 举报

96

积分

0

威望

0

贡献

技术小白

积分
96
发表于 2021-6-17 08:40:56        只看该作者  15#
Mounting /dev/mmcblk0p8(ext2) on /userdata
Log saved to /tmp/mountall.log
Starting system message bus: done
Starting network: OK
No state is present for card Loopback
Found hardware: "Loopback" "Loopback Mixer" "" "" ""
Hardware is initialized using a generic method
No state is present for card Loopback
isp sensor is os04a10,enable HDR
[    5.798944] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.798999] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.799020] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.799039] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.799057] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.799092] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.799109] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.807036] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.807104] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.807135] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.807156] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.807174] rockchip-mipi-dphy-rx: No camera_max_width=
camera_malx_height=
ink between dphy and sensor
[    5.807225] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    5.807241] rockchip-mipi-dphy-rx: No link between dphy and sensor
insmod NPU modules: [    5.830263] galcore: loading out-of-tree module taints kernel.
killall: adbd: no process killed
[    5.838487] galcore: npu init.
[    5.839624] galcore: start npu probe.
[    5.839962] galcore ffbc0000.npu: Linked as a consumer to regulator.8
[    5.840229] npu: platform_get_irq irq = 66
[    5.840258] npu: platform_get_resource registerMemBase = ffbc0000, registerMemSize = 4000
[    5.840278] Galcore version 6.4.3.5.293908
[    5.840286] Galcore options:
[    5.840292]   irqLine           = 66
[    5.840302]   registerMemBase   = 0xFFBC0000
[    5.840311]   registerMemSize   = 0x00004000
[    5.840321]   contiguousSize    = 0x00400000
[    5.840330]   contiguousBase    = 0x0
[    5.840339]   externalSize      = 0x00000000
[    5.840345]   externalBase      = 0x0
[    5.840356]   exclusiveSize     = 0x00000000
[    5.840370]   exclusiveBase     = 0x0
[    5.840381]   bankSize          = 0x00000000
[    5.840401]   fastClear         = -1
[    5.840413]   compression       = 15
[    5.840421]   powerManagement   = 1
[    5.840428]   baseAddress       = 0x00000000
[    5.840437]   physSize          = 0x00000000
[    5.840446]   recovery          = 1
[    5.840455]   stuckDump         = 0
[    5.840465]   gpuProfiler       = 1
[    5.840472]   userClusterMask   = 0x0
[    5.840482]   GPU smallBatch    = 1
[    5.840491]   allMapInOne       = 1
[    5.840503]   irqs              =
[    5.840507] 66,
[    5.840513] -1,
[    5.840518] -1,
[    5.840533] -1,
[    5.840542] -1,
[    5.840551] -1,
[    5.840559] -1,
[    5.840568] -1,
[    5.840617] -1,
[    5.840628] -1,
[    5.840635]
[    5.840647]killall: ntpd: no process kil  led
registerBases     =
[    5.840648] 0xFFBC0000,
[    5.840656] 0x00000000,
[    5.840664] 0x00000000,
[    5.840671] 0x00000000,
[    5.840679] 0x00000000,
[    5.840687] 0x00000000,
[    5.840694] 0x00000000,
[    5.840702] 0x00000000,
[    5.840709] 0x00000000,
[    5.840717] 0x00000000,
[    5.840724]
[    5.840735]   registerSizes     =
[    5.840736] 0x00004000,
[    5.840742] 0x0000dbserver[779]: dbserver versi0on 1.0
000,
[    5.840747] 0x00000000,
[    5.840757] 0x00000000,
[    5.840776] 0x00000000,
[    5.840786] 0x00000000,
[    5.840794] 0x00000000,
[    5.840801] 0x00000000,
[    5.840809] 0x00000000,
[    5.840821] 0x00000000,
[    5.840833]
[    5.840844]   chipIDs           =
[    5.840846] 0xFFFFFFFF,
[    5.840854] 0xFFFFFFFF,
[    5.840861] 0xFFFFFFFF,
[    5.840869] 0xFFFFFFFF,
[    5.840876] 0xFFFFFFFF,
[    5.840883] 0xFFFFFFFF,
[    5.840890] 0xFFFFFFFF,
[    5.840897] 0xFFFFFFFF,
[    5.840905] 0xFFFFFFFF,
[    5.840912] 0xFFFFFFFF,
[    5.840919]
[    5.840930]   core 0 internal sRAMBases =
[    5.840932] 0xFFFFFFFFFFFFFFFF,
[    5.840941] 0xFFFFFFFFFFFFFFFF,
[    5.840948]
[    5.840962]   core 1 internal sRAMBases =
[    5.840964] 0xFFFFFFFFFFFFFFFF,
[    5.840970] 0xFFFFFFFFFFFFFFFF,
[    5.840975]
[    5.840988]   core 2 internal sRAMBases =
[    5.840989] 0xFFFFFFFFFFFFFFFF,
[    5.841003] 0xFFFFFFFFFFFFFFFF,
[    5.841014]
[    5.841026]   core 3 internal sRAMBases =
[    5.841028] 0xFFFFFFFFFFFFFFFF,
[    5.841036] 0xFFFFFFFFFFFFFFFF,
[    5.841050]
[    5.841064]   core 4 internal sRAMBases =
[    5.841066] 0xFFFFFFFFFFFFFFFF,
[    5.841073] 0xFFFFFFFFFFFFFFFF,
[    5.841080]
[    5.841091]   core 5 internal sRAMBases =
[    5.841093] 0xFFFFFFFFFFFFFFFF,
[    5.841100] 0xFFFFFFFFFFFFFFFF,
[    5.841108]
[    5.841119]   core 6 internal sRAMBases =
[    5.841120] 0xFFFFFFFFFFFFFFFF,
[    5.841127] 0xFFFFFFFFFFFFFFFF,
[    5.841135]
[    5.841146]   core 7 internal sRAMBases =
[    5.841147] 0xFFFFFFFFkillall: connmand: no processF killed
FFFFFFF,
[    5.841156] 0xFFFFFFFFFFFFFFFF,
[    5.841163]
[    5.841173]   core 8 internal sRAMBases =
[    5.841175] 0xFFFFFFFFFFFFFFFF,
[    5.841182] 0xFFFFFFFFFFFFFFFF,
[ media get entity by name: rkcif-lvds-subdev is null
media get entity by name: rkcif-lite-lvds-subdev is null
   5.841189]
[    5.84120media get entity by name: rkis0p]- m  pcofrbec -9s uibndterv is null
media get entity by name: rkisp_dmapath is null
media get entity by name: rockcnhip-mipi-dphy-rx is null
al sRAMBases =
[    5.841202] 0xFFFFFFFFFFFFFFFF,
[    5.841208] 0xFFFFFFFFFFFFFFFF,
[    5.841213]
[    5.841225]   External sRAMBases =[ispserver][parse_args]:## need_sync_db: 0
_get_media_info]:get cam_num 0
[isp
    server][rkaiq_get_media_info]:media get sys_path: /dev/media0
media get entity by name: rkisp-isp-subdev is null
media get entity by name: rkisp-[input-params is null
media get entity by name: rkisp-statistics is null
OK
media get entity by name: rkispp_input_params is null
[ispserver][rkaiq_get_media_info]:media get sys_path: /dev/media1
    5.841229] 0xffffffffffffffff,
[    5.841242] 0xfffffffffffffff[ispserver][rkaiq_get_devname]:get rkisp-isp-subdev devnamfe: /dev/v4l-subdev3
[ispserv,er][rkaiq_get_devname]:get rki sp-input-params devname: /dev/video15
cs devname: /dev/video14vname]:get rkisp-statisti
dbs
   erver[779]: [dbserver][main]:dbserver init finish
[    5.841251]
p    5.841263]   mmuPageTablePool  = media get entity by name: rki1s
p[_  i  n5p.u8t4_1p2a7r0a]ms is null
[ispserver][rkaiq_ get_media_info]:media get sys_path: /dev/media2
  mmuDynamicMap     = 1
[    5.841283]   isr[ispserver][rkaiq_get_devname]:get rkispp_input_params devPname: /dev/video23
[ispserver][rkaiq_get_media_info]:media lget sys_path: /dev/media3
l  [ispserver][rkaiq_get_media_info]:media get sys_path: /dev/ media4
[ispserver][rkaiq_get_media_info]:media get sys_path: /dev/media5
dbserver[779]: [dbserver][main]:dbserver dbus register finish
[ispserver][r kaiq_get_media_info]:media get  sys_path: /dev/media6
[isp server][rkaiq_get_media_info]:media get sys_path: /dev/media7
killall: dropbear: no pr ocess killed
[ispserver][rk aiq_get_media_info]:media get  sys_path: /dev/media8
[ispserv er][rkaiq_get_media_info] = 0x0:media get sys_path: /dev/medi0a9
[ispserver][rkaiq_get_media_0info]:cam id 0 find_sensor 0 f0ind_isp 0 find_ispp 0
[ispserver][rkaiq_get_media_info]:cam 00id 1 find_sensor 0 find_isp 1 0find_ispp 1

[    5.841293] Build options:
[    5.841301]   gcdGPU_TIMEOUT    = 20000
[    5.841308]   gcdGPU_2D_TIMEOUT = 4000
[    5.841316]   gcdINTERRUPT_STATISTIC = 1
[    5.844421] Galcore Info: ContiguousBase=0x7f950000 ContiguousSize=0x400000
[    5.849486] Galcore Info: MMU mapped core 0 SRAM[0] hardware virtual address=0x400000 size=0x40000
[    5.849523] Galcore Info: MMU mapped core 0 SRAM[1] hardware virtual address=0x440000 size=0x40000
[    5.850584] NN flop resetting...
[    5.856022] galcore ffbc0000.npu: Init npu devfreq
[ispserver][main]:call_fun_ip[c_demo_server init
    5.856081] galcore ffbc0000.npu: bin=0
[    5.856131] galcore ffbc0000.npu: leakage=0.875
[    5.867933] galcore ffbc0000.npu: temp=45500, pvtm=95425 (95425 + 0)
[    5.868184] galcore ffbc0000.npu: pvtm-volt-sel=open system watchdog
1
[    5.868238] galcore ffbc0000.npu: bin-scale=23
[    5.868949] galcore ffbc0000.npu: avs=0
[    5.870811] galcore ffbc0000.npu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    5.870904] galcore ffbc0000.npu: failed to read out thermal zone (-22)
[    5.871065] galcore ffbc0000.npu: failed to find power_model node
[    5.871084] galcore ffbc0000.npu: failed to initialize power model
[    5.875588] ircut cam_ircut: driver version: 00.01.00
[    5.877964] ircut cam_ircut: failed get pulse-width,use dafult value 100
[    5.878058] ircut cam_ircut: Failed to get ircut-open-gpios
[root@RV1126_RV1109:/]# killall: rknn_server: no process killed
umount: can't unmount /sys/kernel/config: Invalid argument
[    6.242002] using random self ethernet address
[    6.242052] using random host ethernet address
config uvc and rndis...
[    6.260807] file system registered
adb on++++++ 3
umount: can't unmount /dev/usb-ffs/adb: No such file or directory
[    6.311133] read descriptors
[    6.311186] read strings
sh: write error: No such device
config usb0 IP...
ifconfig: SIOCSIFADDR: No such device
ifconfig: SIOCGIFFLAGS: No such device
usb irq:
/oem/aicamera.sh: line 78: can't create /proc/irq//smp_affinity_list: nonexistent directory
Rga built version:1.04 1aab590+2021-04-20 18:18:52
[uvc_app][main]:VERSION:SDK V1.33 Apr 20 2021 19:27:55 media_set:0x1
uvc_app[894]: uvc_app version 1.0.0
media get entity by name: rkcif-lvds-subdev is null
media get entity by name: rkcif-lite-lvds-subdev is null
media get entity by name: rkisp-mpfbc-subdev is null
media get entity by name: rkisp_dmapath is null
media get entity by name: rockchip-mipi-dphy-rx is null
mpp[895]: [(null)][main]:parse_args done!
mpp[895]: [(null)][main]:create aiserver instance done
mpp[895]: [shm_control_uvc][initialize]:shmWriteQueue InitForWrite(ret=1)
mpp[895]: [shm_control_uvc][initialize]:shmReadQueue InitForRead(ret=1)
mpp[895]: [(null)][setupTaskGraph]:AIServer: mFlagDBusServer   = 1
mpp[895]: [shm_control_uvc][debugLoop]:enter
mpp[895]: [(null)][setupTaskGraph]:AIServer: mFlagDBusDbServer = 0
mpp[895]: [(null)][setupTaskGraph]:AIServer: RegisterMediaControl start ok
rockit log level 3
RTUVCGraph       09:00:30-992 {setCameraParams   :472} Cannot get max width from getenv, use default(2560)
RTUVCGraph       09:00:30-992 {setCameraParams   :478} Cannot get max height from getenv, use default(1440)
Rga built version:1.04 1aab590+2021-04-20 18:18:52
uvc_app[894]: [uvc_app][check_uvc_video_id]:Please configure uvc...
[eptz]:EPTZ VERSION 1.0.3 ,log_level[2]
[eptz]:read /etc/eptz_zoom.conf file...
[eptz]:read clip_ratio_data from 720 file
[eptz]:eptz_geometric_support status 0
[eptz]:eptzConfigInit successful
smart_display_service[970]: smart_display_service version 1.0.0
smart_display_service[970]: [smart_display_service][ShmControl]:read shm success
smart_display_service[970]: [smart_display_service][rndis_start_tcp_threads]:rndis_start_tcp_threads mEventRvThread enter
smart_display_service[970]: [smart_display_service][send_process_loop]:---send_process_loop
mpp[895]: [AISceneDirector][setup]:preload scene nn resource in
mpp[895]: [AISceneDirector][setup]:preload scene nn resource ok
mpp[895]: [(null)][main]:aiserver->setupTaskGraph(); done
set governor ondemand ok
回复

使用道具 举报

96

积分

0

威望

0

贡献

技术小白

积分
96
发表于 2021-6-17 08:42:59        只看该作者  16#
烧写了启动挂在这里,串口没反应了
回复

使用道具 举报

1万

积分

7

威望

0

贡献

技术大神

Rank: 8Rank: 8

积分
11422

突出贡献

发表于 2021-6-17 10:04:08        只看该作者  17#
这是已经启动了的,请确认串口是否有错?接错的话无法进行串口操作
回复

使用道具 举报

返回列表
12
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表