|
【Linux】
【AIO-3399-JD4】sdk编译ubuntu16.04,img烧写不正常
发表于 2021-8-10 16:47:01
浏览:5512
|
回复:1
打印
只看该作者
[复制链接]
楼主
按照wiki,下载官网的ubuntu16.04镜像,放入sdk指定路径下,修改配置文件,并执行build.sh aio-3399-jd4-ubuntu.mk。将生成的整体固件,烧写到开发板后,报如下错误。
- [ 4.600589] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
- [ 4.601196] dhd_bus_devreset: WLAN OFF DONE
- [ 4.602408] wifi_platform_set_power = 0
- [ 4.602785] ======== PULL WL_REG_ON(-1) LOW! ========
- OK[ 4.603232] [WLAN_RFKILL]: rockchip_wifi_power: 0
- [ 4.603680] [WLAN_RFKILL]: wifi shut off power.
- [ 4.604082] dhdsdio_probe : the lock is released.
- [ 4.604757] dhd_module_init: Exit err=0
- Debug: configfs_init
- mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gs0': No such file or directory
- mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory
- [ 4.627810] file system registered
- mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory
- mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/rndis.gs0': No such file or directory
- [ 4.637183] Mass Storage Function, version: 2009/09/11
- [ 4.637685] LUN: removable file: (no medium)
- mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uvc.gs6': No such file or directory
- [ 4.658878] read descriptors
- [ 4.659143] read strings
- sh: write error: No such device
- Starting input-event-daemon: input-event-daemon: Start parsing /etc/input-event-daemon.conf...
- input-event-daemon: Adding device: /dev/input/event0...
- input-event-daemon: Adding device: /dev/input/event1...
- input-event-daemon: Adding device: /dev/input/event2...
- input-event-daemon: Start listening on 3 devices...
- done
- /etc/init.d/rcS: line 28: alsactl: not found
- [root@buildroot:/]# rotate degree: 0 - none, 1 - right, 2 - down, 3 - left.
- current rotate degree is : 0
- Ui upgrade
- recovery filesystem table
- =========================
- 0 (null) /tmp ramdisk (null) (null) (null)
- 1 /dev/root / ext2 rw,noauto 0 1
- 2 proc /proc proc defaults 0 0
- 3 devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
- 4 tmpfs /dev/shm tmpfs mode=0777 0 0
- 5 tmpfs /tmp tmpfs mode=1777 0 0
- 6 tmpfs /run tmpfs mode=0755,nosuid,nodev 0 0
- 7 sysfs /sys sysfs defaults 0 0
- 8 debug /sys/kernel/debug debugfs defaults 0 0
- 9 pstore /sys/fs/pstore pstore defaults 0 0
- 10 /dev/block/by-name/misc /misc emmc defaults 0 0
- 11 /dev/block/by-name/oem /oem ext2 defaults 0 2
- 12 /dev/block/by-name/userdata /userdata ext4 defaults 0 2
- buf = /dev/block/by-name/misc
- ### get mount_ponit = /dev/block/by-name/misc ###
- emmc_point is /dev/mmcblk1
- sd_point is (null)
- sd_point_2 is (null)
- Recovery start....................
- read cmdline
- >>> Boot from non-SDcard
- buf = /dev/block/by-name/misc
- ### get mount_ponit = /dev/block/by-name/misc ###
- devices is not MTD.
- I:Boot command: boot-recovery
- I:Got arguments from boot message
- buf = /dev/block/by-name/misc
- ### get mount_ponit = /dev/block/by-name/misc ###
- devices is not MTD.
- Command: "recovery" "--wipe_all"
- Formatting /userdata...
- No link to path!!!
- No link to path!!!
- format '/dev/block/by-name/userdata' to ext4 filesystem
- executing '/sbin/mke2fs'
- [ 8.202692] random: nonblocking pool is initialized
复制代码
过几十秒后会自动重启,之后一直打印:
[ 11.473465] mali ff9a0000.gpu: Stride passed to job_submit doesn't match kernel
同时HDMI也无输出。
有遇见过的么??? |
|