|
发表于 2017-3-17 14:17:13
只看该作者
沙发
出错时的log,如下,
U-Boot 2014.10-RK3288-02 (Jan 21 2015 - 17:07:53)
CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 300000000HZ
ddr pll = 200000000HZ
codec pll = 594000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks:1
Adding bank:0000000000000000(0000000100000000)
128 MiB
storage init OK!
Using default environment
GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
no adc node
can't find dts node for led
can't find dts node for ricoh619
pmic:act8846
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2015-01-21#2.17
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
Hit any key to stop autoboot: 0
kernel @ 0x02000000 (0x0055b5d0)
ramdisk @ 0x04bf0000 (0x00276090)
Secure Boot state: 0
bootrk: do_bootm_linux...
Loading Device Tree to 0481a000, end 04826b24 ... OK
Add bank:0000000000000000, 00000000ff000000
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
|
|