Firefly开源社区

12345
发表新贴

[Linux] [OpenHarmony 3.1 Beta] Firefly 3399/3568 适配OpenHarmony的方法(已过时)

424

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
424
发表于 2022-3-9 17:04:12     
本帖最后由 Firefly_Javier 于 2022-6-9 14:41 编辑

1 整体思路
OpenHarmony是一个上层用户操作系统,在设计上希望兼容不同的底层系统。针对于L2的Linux标准设备,OpenHarmony对Linux、Uboot等底层系统没有太多的依赖,并且在驱动方面,HDF也兼容Linux标准驱动。
所以,底层系统基本上可以直接使用芯片厂家或者oem厂家原有的,上层系统使用OpenHarmony编译出来的。
整体思路上,可以采用分区image拼接的方式来移植适配:
  • 底层系统,即内核及之前的image:uboot、boot(含dtb 、kenel、驱动)等,使用芯片厂家或者oem厂家原有的;
  • 上层系统,即内核之上的image:rootfs、vendor(或者叫oem)、userdata,使用OpenHarmony的。

如果单板SDK的编译工具链和OpenHarmony的编译工具链是兼容的,底层系统的boot(含dtb 、kenel、驱动)部分,用单板SDK编译出来的image就可以。
如果不是兼容的,底层系统的boot部分需要用OpenHarmony的编译工具链重新编译出image。可以参考https://gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/porting/porting-linux-kernel.md

2 版本选择

2.1 OpenHarmony版本选择
建议选择比较新比较稳定的版本,暂不选择开发分支master,当前选择的是OpenHarmony-v3.1-Beta,该版本上已经有Rockchip芯片的产品"润和DAYU200",所以移植起来更加简单。

2.2 SDK版本选择
建议选择纯净的Linux SDK。
基于RK芯片的一些单板支持多种操作系统,比如Android、Ubuntu、Buildroot(纯Linux),对应有不同的SDK,建议选择纯Linux的SDK,不要用Android和Ubuntu的,一是因为Android和Ubuntu对内核机制有修改,增加了移植的难度和工作量,比如Android的AVB、动态分区等机制都影响我们移植;二是目前RK主要芯片的纯Linux SDK的编译工具链和OpenHarmony的工具链是兼容的。

3 适配方法
以Firefly的RK系列为例,适配方法如下步骤。
本方法已验证适配以下Firefly产品,验证OpenHarmony系统都可以正确起来、亮屏显示Launcher。
  • ROC-RK3568-PC,芯片为rk3568
  • AIO-3568J,芯片为rk3568
  • AIO-3399J,芯片为rk3399

3.1 步骤1:准备基础环境
选择使用纯Linux SDK的Buildroot固件,从Firefly官网下载对应产品的Buildroot固件进行烧录。
例如,
burn-update-package.png


3.2 步骤2:修改编译内核
OpenHarmony需要使用IPC binder通信,纯净Linux SDK中没有开启,需要开启IPC binder后重新编译内核。
需要获取到源码后,修改内核配置打开CONFIG_ANDROID_BINDER_IPC宏,重新编译内核。

比如,Firefly系列的操作方法:
首先,在Firefly官网下载对应产品的Linux_SDK源码包,注意Kernel需要选择4.19版本。

然后,修改产品对应的config文件,增加 CONFIG_ANDROID_BINDER_IPC=y。比如
在 kernel/arch/arm64/configs/firefly_linux_defconfig 增加CONFIG_ANDROID_BINDER_IPC=y。

然后,按照官网指导配置好编译环境,编译内核./build.sh kernel,拿到boot.img。

最后,使用按分区烧录的方式,单独烧录编译后的boot.img。烧录成功单板起来后,确保单板基本功能仍然正常,确保有/sys/module/binder/目录。
  1. # ls /sys/module/binder/ -l
  2. total 0
  3. drwxr-xr-x 2 root root    0 2022-01-25 07:20 parameters
  4. --w------- 1 root root 4096 2022-01-25 07:18 uevent
复制代码

烧录时的分区表文件parameter.txt,可以从步骤2下载的源码中拿到,也可以从步骤1中的Buildroot固件解包拿到。解包的方法,可以参考https://blog.csdn.net/Neutionwei/article/details/121886647

3.3 步骤3:修改编译OH
需要有OpenHarmony-v3.1-Beta标准系统的image,下载OpenHarmony-v3.1-Beta的代码,编译hihope rk3568产品。

3.3.1 环境搭建
说明: 以上安装命令适用于Ubuntu18.04,其他版本请根据安装包名称采用对应的安装命令。
  1. $ sudo apt-get update && sudo apt-get install binutils git git-lfs gnupg flex bison gperf build-essential zip curl zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386 lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z1-dev ccache libgl1-mesa-dev libxml2-utils xsltproc unzip m4 bc gnutls-bin python3.8 python3-pip ruby git-lfs openjdk-8-jdk
复制代码

3.3.2 代码下载
  1. $ mkdir OpenHarmony-3.1
  2. $ cd OpenHarmony-3.1
  3. $ repo init --repo-url=https://gitlab.com/firefly-linux/git-repo -u https://gitee.com/openharmony/manifest.git -b refs/tags/OpenHarmony-v3.1-Beta --no-clone-bundle
  4. $ .repo/repo/repo sync -c
  5. $.repo/repo/repo forall -c 'git lfs pull'
复制代码

3.3.3 代码修改(rk3399需要处理,rk3568跳过这一节)

rk3399需要删除zpos相关代码,下面列出的代码需要删除。rk3568不需要这个代码修改。
  1. // 代码路径:./device/hihope/hardware/display/src/display_device/drm_plane.cpp
  2. // 所在函数:int32_t DrmPlane::Init(DrmDevice &drmDevice)
  3. // 删除如下代码:
  4.     ret = drmDevice.GetPlaneProperty(*this, PROP_ZPOS_ID, prop);
  5.     DISPLAY_CHK_RETURN((ret != DISPLAY_SUCCESS), DISPLAY_FAILURE, DISPLAY_LOGE("cat not get pane crtc prop id"));

  6. // 代码路径:./device/hihope/hardware/display/src/display_device/hdi_drm_composition.cpp
  7. // 所在函数:int32_t HdiDrmComposition::ApplyPlane(HdiDrmLayer &layer,
  8. //                                       HdiLayer &hlayer,
  9. //                                       DrmPlane &drmPlane,
  10. //                                       drmModeAtomicReqPtr pset)
  11. // 删除如下代码:
  12.     ret = drmModeAtomicAddProperty(pset, drmPlane.GetId(), drmPlane.GetPropZposId(), layer.GetZorder());
  13.     DISPLAY_LOGI("set the fb planeid %{public}d, GetPropZposId %{public}d, zpos %{public}d", drmPlane.GetId(), drmPlane.GetPropZposId(), layer.GetZorder());
  14.     DISPLAY_CHK_RETURN((ret < 0), DISPLAY_FAILURE, DISPLAY_LOGE("set the zpos fialed errno : %{public}d", errno));
复制代码

3.3.4 编译
  1. $ bash build/prebuilts_download.sh
  2. $ ./build.sh --product-name rk3568 --ccache
复制代码
如果编译成功,会打印类似log如下
  1. post_process

  2. =====build rk3568 successful.

  3. 2021-09-13 09:22:28
复制代码
而且在 out/rk3568/packages/phone/images 可以拿到system.img,vendor.img,userdata.img

3.4 步骤4:调整分区表
因OH的image较大,需要调整分区表。
在分区表文件parameter.txt中修改CMDLINE的内容,根据vendor.img、system.img和userdata.img的大小,调整oem、rootfs、userdata的分区大小,并相应调整后续分区的位置。
比如,Firefly ROC-RK3568-PC产品调整后的分区表。
  1. mtdparts=rk29xxnand:0x00002000@0x00004000(uboot),0x00002000@0x00006000(misc),0x00020000@0x00008000(boot),0x00020000@0x00028000(recovery),0x00010000@0x00048000(backup),0x00150000@0x00058000(oem),0x30ce00@0x001A8000(rootfs),-@0x4B4e00(userdata:grow)
复制代码

3.5 步骤5:烧录修改后分区表和image
使用升级工具,先导入步骤4修改的分区表文件parameter.txt(右键-->导入配置-->选择文件类型为txt),然后选择各文件进行烧录。
  • Parameter,选择步骤4修改后分区表文件parameter.txt
  • oem,选择步骤3编译的vendor.img
  • rootfs,选择步骤3编译的system.img
  • userdata,选择把步骤3编译的userdata.img
    burn-images.png

这一步完成后,rk3568系列产品,OpenHarmony已经可以起来了,HDMI屏幕可以显示OpenHarmony的桌面。


3.6 步骤6:修改挂载路径挂载路径说明

3.6.1 挂载路径
不同产品的分区挂载路径不一样,在分区挂载时,需要指定自己产品实际的分区挂载路径。
我们使用的是OpenHarmony hihope rk3568编译出的image,这些image中的分区挂载路径配置是hihope rk3568的,需要修改成自己产品的实际分区挂载路径。

对于OpenHarmony上的hihope rk3568,有两个文件指定了挂载路径,需要修改这两个文件。
1)第一个文件是/system/etc/init.without_two_stages.cfg(这是在单板上的路径),打包在system.img中,
代码文件路径是 device/hihope/rk3568/build/rootfs/init.without_two_stages.cfg
  1. "mount ext4 /dev/block/platform/fe310000.sdhci/by-name/vendor /vendor wait rdonly barrier=1",
  2. "mount ext4 /dev/block/platform/fe310000.sdhci/by-name/userdata /data wait nosuid nodev noatime barrier=1,data=ordered,noauto_da_alloc"
复制代码
说明:没开启ramdisk的产品使用 /system/etc/init.without_two_stages.cfg,开启ramdisk的产品使用/system/etc/init.cfg。目前测试的几个Firefly产品没有开启ramdisk,如果你不清楚是否开启了ramdisk,建议这两个cfg文件都修改。

(2)第二个文件/vendor/etc/fstab.rk3568(这是在单板上的路径),打包在vendor.img中,
代码文件路径是 device/hihope/rk3568/build/rootfs/fstab.rk3568
  1. # fstab file.
  2. # <src>    <mnt_point>    <type>    <mnt_flags and options>    <fs_mgr_flags>
  3. /dev/block/platform/fe310000.sdhci/by-name/system               /usr       ext4     ro,barrier=1  wait,required
  4. /dev/block/platform/fe310000.sdhci/by-name/vendor              /vendor        ext4     ro,barrier=1  wait,required
  5. /dev/block/platform/fe310000.sdhci/by-name/userdata               /data       ext4     nosuid,nodev,noatime,barrier=1,data=ordered,noauto_da_alloc wait,reservedsize=104857600
复制代码

3.6.2 修改方法
先查看分区挂载路径,不同产品的分区路径的前缀,可以用如下命令查看。查到的前缀加上分区名称,就是完整的挂载路径。
  1. # find /dev/ -name "by-name"
  2. /dev/block/platform/fe310000.sdhci/by-name
复制代码
然后修改配置文件。可以在代码中修改后再编译,也可以把busybox打包到system image中通过vi修改,还可以直接基于image文件修改,方法如下。
  • 在Linux服务器上,拿到vendor.img和system.img
  • 新建空文件夹,比如temp
  • 将system.img mount到temp目录
  • 修改temp/system/etc/init.without_two_stages.cfg文件中的挂载路径,并保存。不同产品怎么修改列在后面。
  • umout temp
  • 将vendor.img mount到temp目录
  • 修改temp/etc/fstab.rk3568文件中的挂载路径,并保存。不同产品怎么修改列在后面。
  • umout temp
    执行命令可参考:

  1. tanpengju@OpenHarmony:~/firefly/hihope$ ls
  2. system.img  userdata.img  vendor.img
  3. tanpengju@OpenHarmony:~/firefly/hihope$ mkdir temp
  4. tanpengju@OpenHarmony:~/firefly/hihope$ sudo mount system.img temp
  5. tanpengju@OpenHarmony:~/firefly/hihope$ ls temp
  6. bin  config  data  dev  etc  init  lib  lost+found  proc  sys  system  updater  vendor
  7. tanpengju@OpenHarmony:~/firefly/hihope$ sudo vi temp/system/etc/init.without_two_stages.cfg
  8. tanpengju@OpenHarmony:~/firefly/hihope$ sudo umount temp
  9. tanpengju@OpenHarmony:~/firefly/hihope$ ls temp/
  10. tanpengju@OpenHarmony:~/firefly/hihope$ sudo mount vendor.img temp
  11. tanpengju@OpenHarmony:~/firefly/hihope$ ls temp/
  12. etc  lost+found
  13. tanpengju@OpenHarmony:~/firefly/hihope$ sudo vi temp/etc/fstab.rk3568
  14. tanpengju@OpenHarmony:~/firefly/hihope$ sudo umount temp
复制代码
完成修改后,烧录修改后的 system.img 和 vendor.img。
烧录后在单板串口通过mount命令查看分区挂载情况,确认oem、userdata分区成功挂载到/vendor和/data目录。

3.6.3 不同产品修改点
Firefly ROC-RK3568-PC和Firefly AIO-3568J ,主要修改了分区名称。
(1)/system/etc/init.without_two_stages.cfg文件
  1. "mount ext4 /dev/block/platform/fe310000.sdhci/by-name/oem /vendor wait rdonly barrier=1",
  2. "mount ext4 /dev/block/platform/fe310000.sdhci/by-name/userdata /data wait nosuid nodev noatime barrier=1,data=ordered,noauto_da_alloc"
复制代码
(2)/vendor/etc/fstab.rk3568文件
  1. # fstab file.
  2. # <src>    <mnt_point>    <type>    <mnt_flags and options>    <fs_mgr_flags>
  3. /dev/block/platform/fe310000.sdhci/by-name/rootfs               /usr       ext4     ro,barrier=1  wait,required
  4. /dev/block/platform/fe310000.sdhci/by-name/oem              /vendor        ext4     ro,barrier=1  wait,required
  5. /dev/block/platform/fe310000.sdhci/by-name/userdata               /data       ext4     nosuid,nodev,noatime,barrier=1,data=ordered,noauto_da_alloc wait,reservedsize=104857600
复制代码

Firefly AIO-3399J ,主要修改分区路径和名称。
(1)/system/etc/init.without_two_stages.cfg文件
  1. "mount ext4 /dev/block/platform/fe330000.sdhci/by-name/oem /vendor wait rdonly barrier=1",
  2. "mount ext4 /dev/block/platform/fe330000.sdhci/by-name/userdata /data wait nosuid nodev noatime barrier=1,data=ordered,noauto_da_alloc"
复制代码
(2)/vendor/etc/fstab.rk3568文件
  1. # fstab file.
  2. # <src>    <mnt_point>    <type>    <mnt_flags and options>    <fs_mgr_flags>
  3. /dev/block/platform/fe330000.sdhci/by-name/rootfs               /usr       ext4     ro,barrier=1  wait,required
  4. /dev/block/platform/fe330000.sdhci/by-name/oem              /vendor        ext4     ro,barrier=1  wait,required
  5. /dev/block/platform/fe330000.sdhci/by-name/userdata               /data       ext4     nosuid,nodev,noatime,barrier=1,data=ordered,noauto_da_alloc wait,reservedsize=104857600
复制代码

3.7 步骤7 修改文件系统读写权限
改下system.img

把 system/etc/init.cfg 和 system/etc/init.without_two_stages.cfg,把
  1. mount rootfs rootfs / remount bind ro nodev
复制代码
改为:

  1. mount rootfs rootfs / remount bind rw nodev
复制代码

3.8 步骤7 触摸屏的适配
首先,查找触摸屏对应的设备。使用 cat /proc/bus/input/devices找到触摸屏对应的设备。比如,这里触摸屏是第4个设备,记录Name为"himax-touchscreen"。
  1. # cat /proc/bus/input/devices
  2. I: Bus=0019 Vendor=524b Product=0006 Version=0100
  3. N: Name="fe6e0030.pwm"
  4. P: Phys=gpio-keys/remotectl
  5. S: Sysfs=/devices/platform/fe6e0030.pwm/input/input0
  6. U: Uniq=
  7. H: Handlers=kbd event0 cpufreq
  8. B: PROP=0
  9. B: EV=3
  10. B: KEY=100 0 0 40408800 1c16c0 0 0 0

  11. I: Bus=0019 Vendor=0000 Product=0000 Version=0000
  12. N: Name="rk805 pwrkey"
  13. P: Phys=rk805_pwrkey/input0
  14. S: Sysfs=/devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1
  15. U: Uniq=
  16. H: Handlers=kbd event1 cpufreq
  17. B: PROP=0
  18. B: EV=3
  19. B: KEY=100000 0 0 0

  20. I: Bus=0000 Vendor=0000 Product=0000 Version=0000
  21. N: Name="Typec_Headphone"
  22. P: Phys=fusb302/typec
  23. S: Sysfs=/devices/platform/fdd40000.i2c/i2c-0/0-0022/input/input2
  24. U: Uniq=
  25. H: Handlers=event2
  26. B: PROP=0
  27. B: EV=21
  28. B: SW=4

  29. I: Bus=0000 Vendor=0000 Product=0000 Version=0000
  30. N: Name="himax-touchscreen"
  31. P: Phys=
  32. S: Sysfs=/devices/virtual/input/input3
  33. U: Uniq=
  34. H: Handlers=kbd event3 cpufreq
  35. B: PROP=2
  36. B: EV=b
  37. B: KEY=10 0 0 0 0 0 0 0 400 0 0 0 2000000 0 40000800 40 0 0 0
  38. B: ABS=6658000 0

  39. I: Bus=0019 Vendor=0001 Product=0001 Version=0100
  40. N: Name="adc-keys"
  41. P: Phys=adc-keys/input0
  42. S: Sysfs=/devices/platform/adc-keys/input/input4
  43. U: Uniq=
  44. H: Handlers=kbd event4 cpufreq
  45. B: PROP=0
  46. B: EV=3
  47. B: KEY=40000800 40000 1000000 0 0
复制代码

然后,将触摸屏设备的Name配置到udev的rule中,让udev自动识别该名称的设备为触摸屏设备。在/etc/udev/rules.d/touchscreen.rules文件末尾中,添加下面这句话,其中"himax-touchscreen"是上一步查询到的名称,不同硬件环境下不一样。
  1. ATTR{name}=="himax-touchscreen", ENV{ID_INPUT}="1", ENV{ID_INPUT_TOUCHSCREEN}="1"
复制代码

修改后的touchscreen.rules文件,示意如下:
  1. # cat /etc/udev/rules.d/touchscreen.rules
  2. ATTRS{name}=="VSoC touchscreen", ENV{ID_INPUT}="1", ENV{ID_INPUT_TOUCHSCREEN}="1"
  3. ATTRS{name}=="VSoC keyboard", ENV{ID_INPUT}="1", ENV{ID_INPUT_KEYBOARD}="1"
  4. DRIVERS=="hid-multitouch", ENV{ID_INPUT}="1", ENV{ID_INPUT_TOUCHSCREEN}="1"
  5. ATTR{name}=="himax-touchscreen", ENV{ID_INPUT}="1", ENV{ID_INPUT_TOUCHSCREEN}="1"
复制代码
修改touchscreen.rules后,需要重启设备生效。

4 适配效果
Firefly ROC-RK3568-PC:
Firefly-ROC-RK3568-PC-with-OpenHarmony.jpg

Firefly AIO-3568J :
Firefly-AIO-3568J-with-OpenHarmony.jpg

Firefly AIO-3399J:
Firefly-AIO-3399J-with-OpenHarmony.jpg














回复

使用道具 举报

12

积分

0

威望

0

贡献

技术小白

积分
12
发表于 2022-3-15 18:40:05     
学习学习
回复

使用道具 举报

1万

积分

17

威望

13

贡献

神级创客

Rank: 8Rank: 8

积分
10775

优秀版主

发表于 2022-3-28 15:35:22     
顶顶顶顶顶
回复

使用道具 举报

75

积分

0

威望

0

贡献

技术小白

积分
75
发表于 2022-4-1 18:49:16     
你好,正在一直openharmony,请教个问题。开发板为firefly AIO-rk3568j,按照教程移植,屏幕点亮了,但是在触摸屏适配的时候有问题,帮忙看一下是什么原因?先谢 image.jpg
回复

使用道具 举报

424

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
424
发表于 2022-4-2 17:16:26     
本帖最后由 Firefly_Javier 于 2022-4-2 17:36 编辑
BXKJ 发表于 2022-4-1 18:49
你好,正在一直openharmony,请教个问题。开发板为firefly AIO-rk3568j,按照教程移植,屏幕点亮了,但是在 ...

改下kernel dts,把 ro 改为 rw,如下:
  1. bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 rw rootwait overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1";
复制代码
改下system.img
把 system/etc/init.cfg 和 system/etc/init.without_two_stages.cfg,把
  1. mount rootfs rootfs / remount bind ro nodev
复制代码
改为:
  1. mount rootfs rootfs / remount bind rw nodev
复制代码



回复

使用道具 举报

75

积分

0

威望

0

贡献

技术小白

积分
75
发表于 2022-4-3 16:05:09     
Firefly_Javier 发表于 2022-4-2 17:16
改下kernel dts,把 ro 改为 rw,如下:
改下system.img
把 system/etc/init.cfg 和 system/etc/init.w ...

你好,按照你说的改了之后,可以写入了,但是触摸仍不能用,下面是串口打印数据,帮忙看看是什么问题,显示屏是DM-M10R800 V2。多谢




=~=~=~=~=~=~=~=~=~=~=~= MobaXterm log 2022.04.03 15:53:33 =~=~=~=~=~=~=~=~=~=~=~=


# reboot

[  906.572514] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service ueventd, pid 338.
[  906.572605] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service console, pid 402.
[  906.572720] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service watchdog_service, pid 339.
[  906.573033] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service hdcd, pid 405.
[  906.573159] watchdog: watchdog0: watchdog did not stop!
[  906.573269] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service sensors, pid 387.
[  906.573327] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service wifi_hal_service, pid 367.
[  906.573435] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service netmanager, pid 389.
[  906.573560] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service time_service, pid 390.
[  906.573731] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service accountmgr, pid 368.
[  906.573875] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service updater_sa, pid 391.
[  906.574038] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service appspawn, pid 362.
[  906.578134] android_work: sent uevent USB_STATE=DISCONNECTED
[  906.578416] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service distributedsched, pid 369.
[  906.582273] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service installs, pid 363.
[  906.582800] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service samgr, pid 341.
[  906.584070] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service foundation, pid 392.
[  906.584433] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service softbus_server, pid 370.
[  906.585313] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service camera_service, pid 394.
[  906.585684] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service pulseaudio, pid 371.
[  906.585907] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service param_watcher, pid 395.
[  906.585965] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service lmks, pid 364.
[  906.586141] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service audio_policy, pid 404.
[  906.587140] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service distributeddata, pid 396.
[  906.588726] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service deviceauth_service, pid 377.
[  906.589260] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service media_service, pid 397.
[  906.589396] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service medialibrary_service, pid 398.
[  906.589614] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service hilogd, pid 378.
[  906.590274] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service telephony_sa, pid 400.
[  906.590652] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service huks_service, pid 381.
[  906.590936] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service dps_service, pid 365.
[  906.591365] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service inputmethod_service, pid 401.
[  906.591441] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service faultloggerd, pid 382.
[  906.591745] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service wifi_manager_service, pid 383.
[  906.592207] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service hiview, pid 384.
[  906.592421] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service hdf_devmgr, pid 385.
[  906.592706] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service hdi_weston, pid 571.
[  906.592861] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service mmi_uinput_service, pid 348.
[  906.593787] [pid=1][INIT][INFO] [init_common_service.c:245)] stop service udevd_service, pid 342.
[  906.614085] binder: 844:845 transaction failed 29189/-22, size 68-0 line 3063
[  906.614089] binder: 965:974 transaction failed 29189/-22, size 68-0 line 3063
[  906.614140] binder: 849:850 transaction failed 29189/-22, size 68-0 line 3063
[  906.614361] binder: 827:831 transaction failed 29189/-22, size 68-0 line 3063
[  906.614384] binder: 820:825 transaction failed 29189/-22, size 68-0 line 3063
[  906.614916] binder: 836:839 transaction failed 29189/-22, size 68-0 line 3063
[  906.617676] binder_alloc: 571: binder_alloc_buf, no vma
[  906.617696] binder_alloc: 571: binder_alloc_buf, no vma
[  906.617699] binder: 965:973 transaction failed 29189/-3, size 124-0 line 3232
[  906.617712] binder_alloc: 571: binder_alloc_buf, no vma
[  906.617714] binder: 827:881 transaction failed 29189/-3, size 120-0 line 3232
[  906.617728] binder: 849:868 transaction failed 29189/-3, size 116-0 line 3232
[  906.617736] binder_alloc: 571: binder_alloc_buf, no vma
[  906.617747] binder: 820:878 transaction failed 29189/-3, size 120-0 line 3232
[  906.618241] binder_alloc: 571: binder_alloc_buf, no vma
[  906.618556] binder_alloc: 571: binder_alloc_buf, no vma
[  906.618698] binder_alloc: 571: binder_alloc_buf, no vma
[  906.620814] [pid=1][INIT][ERROR] [init_reboot.c:166)] Failed umount data. errno = 16.
[  906.620867] cpu cpu0: min=816000, max=816000
[  906.623121] binder: undelivered TRANSACTION_COMPLETE
[  906.623145] binder: undelivered transaction 3704635, process died.
[  906.627597] rk808 0-0020: reboot: not restore POWER_EN
[  906.654119] dw-mipi-dsi fe060000.dsi: [drm:dw_mipi_dsi_encoder_enable] final DSI-Link bandwidth: 480 x 4 Mbps
[  906.718889] rockchip-vop2 fe040000.vop: [drm:vop2_crtc_atomic_disable] Crtc atomic disable vp0
[  906.742307] rkisp_hw fdff0000.rkisp: rkisp_hw_shutdown
[  906.751170] fan53555-regulator 0-001c: fan53555..... reset
[  906.752729] fan53555-regulator 0-001c: reset: force fan53555_reset ok!
[  906.753777] mpp_rkvdec2 fdf80200.rkvdec: shutdown device
[  906.754264] mpp_jpgdec fded0000.jpegd: shutdown device
[  906.754734] mpp-iep2 fdef0000.iep: shutdown device
[  906.755171] mpp_vepu2 fdee0000.vepu: shutdown device
[  906.755630] mpp_vdpu2 fdea0400.vdpu: shutdown device
[  906.756088] mpp_rkvenc fdf40000.rkvenc: shutdown device
[  906.756584] mpp_rkvenc fdf40000.rkvenc: shutdown success
[  906.758548] rkflash_shutdown...
[  906.759889] rkflash_shutdown:OK
[  906.760992] reboot: Restarting system
DDR Version V1.12 20220105
In
ddrconfig:7
LP4 MR14:0x4d
LPDDR4, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
tdqss: cs0 dqs0: 482ps, dqs1: 409ps, dqs2: 434ps, dqs3: 337ps,
tdqss: cs1 dqs0: 458ps, dqs1: 361ps, dqs2: 409ps, dqs3: 313ps,

change to: 324MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 528MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x68

change to: 780MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 1560MHz(final freq)
PHY drv:clk:38,ca:38,DQ:30,odt:60
vrefinner:16%, vrefout:29%
dram drv:40,odt:80
vref_ca:00000068
clk skew:0x3
cs 0:
the read training result:
DQS0:0x36, DQS1:0x31, DQS2:0x36, DQS3:0x2d,
min  :0x13 0x15 0x13 0x10  0x2  0x7  0xb  0x9 , 0xc  0x9  0x1  0x2  0xb  0x9  0xd  0x9 ,
      0x16 0x13  0xe  0x9  0x4  0x2  0x7  0x8 , 0xe  0x8  0x6  0x2  0xc  0xb  0xc  0xe ,
mid  :0x2d 0x2d 0x2d 0x29 0x1c 0x21 0x26 0x23 ,0x26 0x24 0x1b 0x1a 0x26 0x23 0x27 0x25 ,
      0x30 0x2e 0x26 0x22 0x1c 0x1b 0x20 0x22 ,0x27 0x22 0x1f 0x1a 0x25 0x27 0x25 0x28 ,
max  :0x47 0x45 0x47 0x43 0x37 0x3c 0x41 0x3d ,0x41 0x3f 0x35 0x32 0x41 0x3e 0x42 0x41 ,
      0x4a 0x49 0x3e 0x3c 0x35 0x34 0x39 0x3d ,0x41 0x3c 0x39 0x32 0x3e 0x43 0x3e 0x42 ,
range:0x34 0x30 0x34 0x33 0x35 0x35 0x36 0x34 ,0x35 0x36 0x34 0x30 0x36 0x35 0x35 0x38 ,
      0x34 0x36 0x30 0x33 0x31 0x32 0x32 0x35 ,0x33 0x34 0x33 0x30 0x32 0x38 0x32 0x34 ,
the write training result:
DQS0:0x63, DQS1:0x54, DQS2:0x59, DQS3:0x46,
min  :0xc1 0xc3 0xc4 0xc0 0xb1 0xb5 0xb9 0xba 0xb9 ,0xac 0xac 0xa4 0xa4 0xaf 0xae 0xb1 0xb0 0xac ,
      0xb8 0xb7 0xb1 0xb0 0xa8 0xa7 0xa9 0xae 0xb1 ,0xa4 0xa2 0x9d 0x98 0xa6 0xa8 0xa4 0xaa 0x9f ,
mid  :0xdb 0xdd 0xde 0xda 0xcb 0xcf 0xd3 0xd3 0xd2 ,0xc8 0xc6 0xbd 0xbe 0xc9 0xc7 0xc9 0xc9 0xc6 ,
      0xd4 0xd4 0xcc 0xcc 0xc3 0xc0 0xc3 0xc7 0xcb ,0xc0 0xbb 0xb8 0xb4 0xbf 0xc1 0xbd 0xc4 0xb9 ,
max  :0xf5 0xf7 0xf9 0xf5 0xe5 0xe9 0xee 0xed 0xeb ,0xe5 0xe0 0xd6 0xd9 0xe4 0xe0 0xe2 0xe2 0xe0 ,
      0xf1 0xf1 0xe8 0xe8 0xde 0xda 0xde 0xe1 0xe6 ,0xdc 0xd4 0xd3 0xd0 0xd8 0xdb 0xd7 0xde 0xd3 ,
range:0x34 0x34 0x35 0x35 0x34 0x34 0x35 0x33 0x32 ,0x39 0x34 0x32 0x35 0x35 0x32 0x31 0x32 0x34 ,
      0x39 0x3a 0x37 0x38 0x36 0x33 0x35 0x33 0x35 ,0x38 0x32 0x36 0x38 0x32 0x33 0x33 0x34 0x34 ,
cs 1:
the read training result:
DQS0:0x34, DQS1:0x33, DQS2:0x36, DQS3:0x2f,
min  :0x13 0x15 0x13 0x11  0x1  0x6  0xb  0x9 , 0xd  0x9  0x2  0x2  0xb  0xb  0xf  0xc ,
      0x16 0x13  0xb  0x9  0x2  0x0  0x6  0x4 , 0xe  0x8  0x6  0x1  0xc  0xc  0xc 0x10 ,
mid  :0x2d 0x2d 0x2c 0x29 0x1b 0x1f 0x25 0x22 ,0x28 0x25 0x1b 0x1a 0x26 0x25 0x29 0x27 ,
      0x30 0x2e 0x25 0x23 0x1b 0x1a 0x1f 0x20 ,0x29 0x23 0x21 0x1a 0x27 0x29 0x27 0x2b ,
max  :0x47 0x45 0x46 0x42 0x36 0x39 0x3f 0x3b ,0x43 0x41 0x35 0x33 0x42 0x40 0x44 0x42 ,
      0x4b 0x49 0x3f 0x3e 0x35 0x35 0x39 0x3d ,0x45 0x3f 0x3c 0x34 0x43 0x46 0x42 0x46 ,
range:0x34 0x30 0x33 0x31 0x35 0x33 0x34 0x32 ,0x36 0x38 0x33 0x31 0x37 0x35 0x35 0x36 ,
      0x35 0x36 0x34 0x35 0x33 0x35 0x33 0x39 ,0x37 0x37 0x36 0x33 0x37 0x3a 0x36 0x36 ,
the write training result:
DQS0:0x63, DQS1:0x54, DQS2:0x59, DQS3:0x46,
min  :0xbb 0xbe 0xbf 0xbb 0xac 0xb1 0xb5 0xb6 0xb5 ,0xa4 0xa4 0x9b 0x9d 0xa7 0xa6 0xab 0xa9 0xa4 ,
      0xb3 0xb1 0xab 0xa9 0xa0 0x9f 0xa2 0xa7 0xaa ,0x9f 0x9b 0x99 0x95 0xa0 0xa3 0xa0 0xa5 0x9a ,
mid  :0xd6 0xd8 0xd9 0xd5 0xc5 0xca 0xcf 0xcf 0xce ,0xc0 0xbe 0xb5 0xb7 0xc0 0xbe 0xc2 0xc1 0xbd ,
      0xcf 0xcd 0xc5 0xc5 0xbb 0xb8 0xbc 0xc1 0xc4 ,0xbb 0xb6 0xb4 0xb0 0xba 0xbd 0xb9 0xbf 0xb5 ,
max  :0xf1 0xf3 0xf4 0xf0 0xde 0xe3 0xea 0xe9 0xe8 ,0xdc 0xd8 0xcf 0xd2 0xda 0xd7 0xda 0xda 0xd7 ,
      0xeb 0xea 0xe0 0xe2 0xd6 0xd2 0xd7 0xdb 0xde ,0xd7 0xd1 0xcf 0xcb 0xd4 0xd7 0xd3 0xd9 0xd0 ,
range:0x36 0x35 0x35 0x35 0x32 0x32 0x35 0x33 0x33 ,0x38 0x34 0x34 0x35 0x33 0x31 0x2f 0x31 0x33 ,
      0x38 0x39 0x35 0x39 0x36 0x33 0x35 0x34 0x34 ,0x38 0x36 0x36 0x36 0x34 0x34 0x33 0x34 0x36 ,
CA Training result:
cs:0 min  :0x5f 0x4c 0x52 0x3d 0x53 0x3d 0x51 ,0x5d 0x49 0x51 0x3b 0x51 0x3b 0x52 ,
cs:0 mid  :0x93 0x90 0x87 0x84 0x87 0x82 0x79 ,0x92 0x8e 0x85 0x81 0x84 0x82 0x7b ,
cs:0 max  :0xc7 0xd5 0xbc 0xcb 0xbb 0xc8 0xa2 ,0xc8 0xd4 0xba 0xc8 0xb8 0xc9 0xa4 ,
cs:0 range:0x68 0x89 0x6a 0x8e 0x68 0x8b 0x51 ,0x6b 0x8b 0x69 0x8d 0x67 0x8e 0x52 ,
cs:1 min  :0x58 0x49 0x4f 0x3c 0x51 0x3b 0x46 ,0x59 0x40 0x4d 0x3b 0x4f 0x36 0x44 ,
cs:1 mid  :0x91 0x8e 0x86 0x81 0x86 0x80 0x77 ,0x8f 0x89 0x83 0x7d 0x82 0x7d 0x76 ,
cs:1 max  :0xcb 0xd3 0xbd 0xc7 0xbc 0xc5 0xa9 ,0xc5 0xd3 0xb9 0xbf 0xb5 0xc5 0xa9 ,
cs:1 range:0x73 0x8a 0x6e 0x8b 0x6b 0x8a 0x63 ,0x6c 0x93 0x6c 0x84 0x66 0x8f 0x65 ,
out
U-Boot SPL board init
U-Boot SPL 2017.09(u-boot commit id: 0b07ec816470af0052545233fbdc6f33fc370bf2)(sdk version: rk356x_linux_release_20220311_v1.2.3a.xml)-g0b07ec8164 #yao (Mar 30 2022 - 16:09:57)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC error: The cmd index is 1, ret is -110.....
Card did not respond to voltage select!
mmc_init: -95, time 13
spl: mmc init failed with error: -95
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(fe4f274c06...) + OK
## Checking uboot 0x00a00000 ... sha256(a7aa9f8d22...) + OK
## Checking fdt 0x00b27a48 ... sha256(30938731de...) + OK
## Checking atf-2 0x00068000 ... sha256(8d44036095...) + OK
## Checking atf-3 0xfdcd0000 ... sha256(e410275b51...) + OK
## Checking atf-4 0xfdcc9000 ... sha256(990c53fc01...) + OK
## Checking atf-5 0x00066000 ... sha256(315a4195a9...) + OK
## Checking optee 0x08400000 ... sha256(c9dfa757d0...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
Total: 227.787 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-181-gc9a647cae:cl
NOTICE:  BL31: Built : 10:55:41, Oct 18 2021
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    pmu v1 is valid
INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-630-g631d7ed9a #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #6 Mon Jan 17 19:07:43 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot 2017.09(u-boot commit id: 0b07ec816470af0052545233fbdc6f33fc370bf2)(sdk version: rk356x_linux_release_20220311_v1.2.3a.xml)-g0b07ec8164 #yao (Mar 30 2022 - 16:09:57 +0800)

Model: Firefly RK3568 Board
PreSerial: 2, raw, 0xfe660000
DRAM:  2 GiB
Sysmem: init
Relocation Offset: 7d351000
Relocation fdt: 7b9f8728 - 7b9fece0
CR: M/C/I
Using default environment

dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v1
boot mode: normal
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
PMIC:  RK8090 (on=0x40, off=0x00)
vdd_logic init 900000 uV
vdd_gpu init 900000 uV
vdd_npu init 900000 uV
I2c1 speed: 100000Hz
Device 'gpio@fe740000': seq 1 is in use by 'gpio@21'
io-domain: OK
Could not find baseparameter partition
Model: AIO-3568J MIPI (Linux)
Rockchip UBOOT DRM driver version: v1.0.1
VOP have 1 active VP
vp0 have layer nr:6[0 2 4 1 3 5 ], primary plane: 4
vp1 have layer nr:0[], primary plane: 0
vp2 have layer nr:0[], primary plane: 0
Using display timing dts
dsi@fe060000:  detailed mode clock 72600 kHz, flags[8000000a]
    H: 0800 0832 0846 0872
    V: 1280 1360 1368 1388
bus_format: 100e
VOP update mode to: 800x1280p0, type: MIPI0 for VP0
rk3036_pll_set_rate: wait pll lock timeout! pll_id=7
VOP VP0 enable Smart0[500x501->500x501@150x389] fmt[2] addr[0x7df20000]
final DSI-Link bandwidth: 480 Mbps x 4
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  apll 816000 KHz
  dpll 780000 KHz
  gpll 1188000 KHz
  cpll 1000000 KHz
  npll 1200000 KHz
  vpll 24000 KHz
  hpll 72000 KHz
  ppll 200000 KHz
  armclk 816000 KHz
  aclk_bus 150000 KHz
  pclk_bus 100000 KHz
  aclk_top_high 500000 KHz
  aclk_top_low 400000 KHz
  hclk_top 150000 KHz
  pclk_top 100000 KHz
  aclk_perimid 300000 KHz
  hclk_perimid 150000 KHz
  pclk_pmu 100000 KHz
Net:   Device 'gpio@fe750000': seq 2 is in use by 'gpio@fe740000'
eth1: ethernet@fe010000, eth0: ethernet@fe2a0000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0x7983c100 with size 0x01fbb600
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at 7983c100 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x7985ef00
     Data Size:    24268808 Bytes = 23.1 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00280000
     Entry Point:  0x00280000
     Hash algo:    sha256
     Hash value:   9b2618f072992e94a738e92aced3c9b35f5031e28719993ec16535144181fbc5
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at 7983c100 ...
   Using 'conf' configuration
   Trying 'ramdisk' ramdisk subimage
     Description:  unavailable
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0x7af84100
     Data Size:    8860887 Bytes = 8.5 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x0a200000
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   252b580d48d2afa60baba78b73045c9ccc36e894535d5683b9d1d2f4158db7e1
   Verifying Hash Integrity ... sha256+ OK
   Loading ramdisk from 0x7af84100 to 0x0a200000
## Loading fdt from FIT Image at 7983c100 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x7983c900
     Data Size:    140800 Bytes = 137.5 KiB
     Architecture: AArch64
     Load Address: 0x0a100000
     Hash algo:    sha256
     Hash value:   4829de52ef5b203b58c0a79aa31136f50091cfd59e2db8cad33ab434f74e85f8
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x0a100000 to 0x0a100000
   Booting using the fdt blob at 0x0a100000
   Loading Kernel Image from 0x7985ef00 to 0x00280000 ... OK
   kernel loaded at 0x00280000, end = 0x019a5008
  'reserved-memory' abc@80900000: addr=80900000 size=100000
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 000000000a100000, end 000000000a1255ff
vp0, plane_mask:0x3f, primary-id:4, curser-id:-1
vp1, plane_mask:0x0, primary-id:0, curser-id:-1
vp2, plane_mask:0x0, primary-id:0, curser-id:-1
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0x80000000 (size: 0x76c00000)
Total: 1189.94 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 4.19.219 (yao@yao-HP-340-G2) (firefly: 72491ed436765c35dddc56ce27b537a4d3703107) (sdk version: rk356x_linux_release_20220311_v1.2.3a.xml) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05), GNU ld (Linaro_Binutils-2017.05) 2.27.0.20161019) #2 SMP Sun Apr 3 15:19:26 CST 2022
[    0.000000] Machine model: AIO-3568J MIPI (Linux)
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 23 pages/cpu s54184 r8192 d31832 u94208
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 511496
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  storagenode=sdhci@fe310000 androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1990000K/2078720K available (14782K kernel code, 2004K rwdata, 5236K rodata, 1600K init, 592K bss, 72336K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 53356 entries in 209 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU event tracing is enabled.
[    0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0xfd440000-0xfd45ffff]
[    0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @7e500000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @7e510000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x000000007e520000
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[    0.000000] CPU0: using LPI pending table @0x000000007e530000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] random: random: get_random_bytes called from start_kernel+0x36c/0x510 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002330] Console: colour dummy device 80x25
[    0.002790] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.003750] pid_max: default: 32768 minimum: 301
[    0.004360] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.007502] ASID allocator initialised with 32768 entries
[    0.008178] rcu: Hierarchical SRCU implementation.
[    0.011506] Platform MSI: interrupt-controller@fd440000 domain created
[    0.012708] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[    0.014367] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    0.016288] Detected VIPT I-cache on CPU1
[    0.016330] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[    0.016383] CPU1: using LPI pending table @0x000000007e6b0000
[    0.016438] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.018043] Detected VIPT I-cache on CPU2
[    0.018078] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[    0.018127] CPU2: using LPI pending table @0x000000007e710000
[    0.018172] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.019726] Detected VIPT I-cache on CPU3
[    0.019759] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[    0.019810] CPU3: using LPI pending table @0x000000007e730000
[    0.019853] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.019993] smp: Brought up 1 node, 4 CPUs
[    0.026930] SMP: Total of 4 processors activated.
[    0.027369] CPU features: detected: GIC system register CPU interface
[    0.027965] CPU features: detected: Privileged Access Never
[    0.028482] CPU features: detected: LSE atomic instructions
[    0.029000] CPU features: detected: User Access Override
[    0.029491] CPU features: detected: 32-bit EL0 Support
[    0.029966] CPU features: detected: RAS Extension Support
[    0.030668] CPU: All CPU(s) started at EL2
[    0.031081] alternatives: patching kernel code
[    0.038404] devtmpfs: initialized
[    0.070810] Registered cp15_barrier emulation handler
[    0.071348] Registered setend emulation handler
[    0.072114] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.073035] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.074394] pinctrl core: initialized pinctrl subsystem
[    0.076011] NET: Registered protocol family 16
[    0.081612] cpuidle: using governor menu
[    0.082016] Registered FIQ tty driver
[    0.083320] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.085925] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.093547] console [pstore-1] enabled
[    0.093902] pstore: Registered ramoops as persistent store backend
[    0.094509] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.137734] rockchip-gpio fdd60000.gpio: probed gpio0 (fdd60000.gpio)
[    0.139100] rockchip-gpio fe740000.gpio: probed gpio1 (fe740000.gpio)
[    0.140394] rockchip-gpio fe750000.gpio: probed gpio2 (fe750000.gpio)
[    0.141687] rockchip-gpio fe760000.gpio: probed gpio3 (fe760000.gpio)
[    0.143009] rockchip-gpio fe770000.gpio: probed gpio4 (fe770000.gpio)
[    0.143728] rockchip-pinctrl pinctrl: probed pinctrl
[    0.161967] cryptd: max_cpu_qlen set to 1000
[[    0.164409] console [ttyFIQ0] enabled
    0.164409] console [ttyFIQ0] enabled
[    0.165092] bootconsole [uart8250] disabled
[    0.165092] bootconsole [uart8250] disabled
[    0.165734] Registered fiq debugger ttyFIQ0
[    0.166814] vcc3v3_sys: supplied by dc_12v
[    0.167300] vcc5v0_sys: supplied by dc_12v
[    0.169502] vcc2v5-sys: supplied by vcc3v3_sys
[    0.170000] vcc3v3_vga: supplied by vcc3v3_sys
[    0.170475] pcie30_avdd0v9: supplied by vcc3v3_sys
[    0.170954] pcie30_avdd1v8: supplied by vcc3v3_sys
[    0.171486] vcc3v3_bu: supplied by vcc5v0_sys
[    0.176599] rk_iommu fde4b000.iommu: version = 2
[    0.177289] rk_iommu fdea0800.iommu: version = 2
[    0.177842] rk_iommu fded0480.iommu: version = 2
[    0.178416] rk_iommu fdee0800.iommu: version = 2
[    0.178907] rk_iommu fdef0800.iommu: version = 2
[    0.179356] rk_iommu fdf40f00.iommu: version = 2
[    0.179909] rk_iommu fdf80800.iommu: version = 2
[    0.180412] rk_iommu fdfe0800.iommu: version = 2
[    0.180944] rk_iommu fdff1a00.iommu: version = 2
[    0.181407] rk_iommu fe043e00.iommu: version = 2
[    0.182500] SCSI subsystem initialized
[    0.182866] usbcore: registered new interface driver usbfs
[    0.182956] usbcore: registered new interface driver hub
[    0.183031] usbcore: registered new device driver usb
[    0.183168] media: Linux media interface: v0.10
[    0.183247] videodev: Linux video capture interface: v2.00
[    0.183365] pps_core: LinuxPPS API ver. 1 registered
[    0.183390] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.183433] PTP clock support registered
[    0.183845] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    0.187057] Advanced Linux Sound Architecture Driver Initialized.
[    0.187660] Bluetooth: Core ver 2.22
[    0.187728] NET: Registered protocol family 31
[    0.187754] Bluetooth: HCI device and connection manager initialized
[    0.187784] Bluetooth: HCI socket layer initialized
[    0.187843] Bluetooth: L2CAP socket layer initialized
[    0.187893] Bluetooth: SCO socket layer initialized
[    0.188444] rockchip-cpuinfo cpuinfo: SoC: 35681000
[    0.188476] rockchip-cpuinfo cpuinfo: Serial: 73a945fe44827f20
[    0.190082] clocksource: Switched to clocksource arch_sys_counter
[    0.290847] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.291237] NET: Registered protocol family 2
[    0.291463] IP idents hash table entries: 32768 (order: 6, 262144 bytes)
[    0.292875] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes)
[    0.292957] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.293141] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[    0.293714] TCP: Hash tables configured (established 16384 bind 16384)
[    0.293908] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[    0.294034] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[    0.294377] NET: Registered protocol family 1
[    0.295073] RPC: Registered named UNIX socket transport module.
[    0.295099] RPC: Registered udp transport module.
[    0.295118] RPC: Registered tcp transport module.
[    0.295130] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.297170] Trying to unpack rootfs image as initramfs...
[    0.753698] Freeing initrd memory: 8652K
[    0.755694] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.758685] Initialise system trusted keyrings
[    0.758945] workingset: timestamp_bits=61 max_order=19 bucket_order=0
[    0.767560] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.768649] NFS: Registering the id_resolver key type
[    0.768702] Key type id_resolver registered
[    0.768716] Key type id_legacy registered
[    0.768765] jffs2: version 2.2. (NAND) ?2001-2006 Red Hat, Inc.
[    0.769060] fuse init (API version 7.27)
[    0.769677] SGI XFS with security attributes, no debug enabled
[    0.773231] NET: Registered protocol family 38
[    0.773287] Key type asymmetric registered
[    0.773303] Asymmetric key parser 'x509' registered
[    0.773371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.773431] io scheduler noop registered
[    0.773457] io scheduler deadline registered
[    0.773629] io scheduler cfq registered (default)
[    0.773656] io scheduler mq-deadline registered
[    0.773678] io scheduler kyber registered
[    0.775106] rockchip-csi2-dphy csi2-dphy1: csi2 dphy1 probe successfully!
[    0.775361] rockchip-csi2-dphy csi2-dphy2: csi2 dphy2 probe successfully!
[    0.775571] rockchip-csi2-dphy-hw fe870000.csi2-dphy-hw: csi2 dphy hw probe successfully!
[    0.779131] phy phy-fe8a0000.usb2-phy.0: Linked as a consumer to regulator.4
[    0.779518] phy phy-fe8a0000.usb2-phy.1: Linked as a consumer to regulator.5
[    0.781374] extcon extcon1: failed to create extcon usb2-phy link
[    0.781559] phy phy-fe8b0000.usb2-phy.2: Linked as a consumer to regulator.4
[    0.781797] phy phy-fe8b0000.usb2-phy.3: Linked as a consumer to regulator.4
[    0.781986] phy phy-fe8b0000.usb2-phy.3: No vbus specified for otg port
[    0.794205] rk-pcie 3c0800000.pcie: Linked as a consumer to regulator.19
[    0.794961] pwm-backlight backlight-0: backlight-0 supply power not found, using dummy regulator
[    0.795075] pwm-backlight backlight-0: Linked as a consumer to regulator.0
[    0.795419] mpp_service mpp-srv: be32fafb08b3 author: Yandong Lin 2021-11-18 video: rockchip: mpp: Fix mpp_iommu_refresh crash issue
[    0.795451] mpp_service mpp-srv: probe start
[    0.796675] iommu: Adding device fdf40000.rkvenc to group 5
[    0.796730] mpp_rkvenc fdf40000.rkvenc: Linked as a consumer to fdf40f00.iommu
[    0.797061] mpp_rkvenc fdf40000.rkvenc: probing start
[    0.797716] mpp_rkvenc fdf40000.rkvenc: venc regulator not ready, retry
[    0.797746] rkvenc_init:1199: failed to add venc devfreq
[    0.798171] mpp_rkvenc fdf40000.rkvenc: probing finish
[    0.799779] iommu: Adding device fdea0400.vdpu to group 1
[    0.799835] mpp_vdpu2 fdea0400.vdpu: Linked as a consumer to fdea0800.iommu
[    0.800058] mpp_vdpu2 fdea0400.vdpu: probe device
[    0.800886] mpp_vdpu2 fdea0400.vdpu: probing finish
[    0.801688] iommu: Adding device fdee0000.vepu to group 3
[    0.801746] mpp_vepu2 fdee0000.vepu: Linked as a consumer to fdee0800.iommu
[    0.802007] mpp_vepu2 fdee0000.vepu: probe device
[    0.802758] mpp_vepu2 fdee0000.vepu: probing finish
[    0.803631] iommu: Adding device fdef0000.iep to group 4
[    0.803685] mpp-iep2 fdef0000.iep: Linked as a consumer to fdef0800.iommu
[    0.803901] mpp-iep2 fdef0000.iep: probe device
[    0.804542] mpp-iep2 fdef0000.iep: allocate roi buffer failed
[    0.804770] mpp-iep2 fdef0000.iep: probing finish
[    0.805499] iommu: Adding device fded0000.jpegd to group 2
[    0.805552] mpp_jpgdec fded0000.jpegd: Linked as a consumer to fded0480.iommu
[    0.805747] mpp_jpgdec fded0000.jpegd: probe device
[    0.806472] mpp_jpgdec fded0000.jpegd: probing finish
[    0.806511] rk-pcie 3c0800000.pcie: missing legacy IRQ resource
[    0.806553] rk-pcie 3c0800000.pcie: Missing *config* reg space
[    0.806583] rk-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
[    0.806623] rk-pcie 3c0800000.pcie:   err 0x380000000..0x3807fffff -> 0x80000000
[    0.806665] rk-pcie 3c0800000.pcie:    IO 0x380800000..0x3808fffff -> 0x80800000
[    0.806702] rk-pcie 3c0800000.pcie:   MEM 0x380900000..0x3bfffffff -> 0x80900000
[    0.807353] iommu: Adding device fdf80200.rkvdec to group 6
[    0.807395] mpp_rkvdec2 fdf80200.rkvdec: Linked as a consumer to fdf80800.iommu
[    0.807726] mpp_rkvdec2 fdf80200.rkvdec: probing start
[    0.807991] mpp_rkvdec2 fdf80200.rkvdec: 16 task capacity link mode detected
[    0.808441] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
[    0.808473] rkvdec2_init:661: No niu aclk reset resource define
[    0.808500] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
[    0.808521] rkvdec2_init:664: No niu hclk reset resource define
[    0.808769] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000
[    0.808800] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000
[    0.808822] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056
[    0.808843] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536
[    0.808866] mpp_rkvdec2 fdf80200.rkvdec: min_width 512
[    0.808944] mpp_rkvdec2 fdf80200.rkvdec: link mode probe finish
[    0.809051] mpp_rkvdec2 fdf80200.rkvdec: probing finish
[    0.809562] mpp_service mpp-srv: probe success
[    0.817580] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
[    0.817625] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.820915] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
[    0.820955] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.822859] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    0.824377] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.825538] fe670000.serial: ttyS3 at MMIO 0xfe670000 (irq = 70, base_baud = 1500000) is a 16550A
[    0.826395] fe680000.serial: ttyS4 at MMIO 0xfe680000 (irq = 71, base_baud = 1500000) is a 16550A
[    0.827288] fe6c0000.serial: ttyS8 at MMIO 0xfe6c0000 (irq = 72, base_baud = 1500000) is a 16550A
[    0.831068] random: fast init done
[    0.831417] random: crng init done
[    0.831914] iommu: Adding device fe040000.vop to group 9
[    0.831974] rockchip-vop2 fe040000.vop: Linked as a consumer to fe043e00.iommu
[    0.839113] rockchip-drm display-subsystem: Linked as a consumer to fe040000.vop
[    0.841837] rockchip-drm display-subsystem: Linked as a consumer to fe060000.dsi
[    0.844157] rockchip-drm display-subsystem: dmc is disabled
[    0.844551] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x3f, primary plane phy id: 4
[    0.844593] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x0, primary plane phy id: -1
[    0.844626] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
[    0.844897] [drm] unsupported AFBC format[3432564e]
[    0.844984] [drm] failed to init overlay plane Cluster0-win1
[    0.845074] [drm] failed to init overlay plane Cluster1-win1
[    0.845232] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff8008fca6d8)
[    0.845284] dw-mipi-dsi fe060000.dsi: [drm:dw_mipi_dsi_bind] *ERROR* Failed to find panel or bridge: -517
[    0.850923] panel-simple-dsi fe060000.dsi.0: fe060000.dsi.0 supply power not found, using dummy regulator
[    0.851064] panel-simple-dsi fe060000.dsi.0: Linked as a consumer to regulator.0
[    0.851142] panel-simple-dsi fe060000.dsi.0: fe060000.dsi.0 supply vsp not found, using dummy regulator
[    0.851265] panel-simple-dsi fe060000.dsi.0: fe060000.dsi.0 supply vsn not found, using dummy regulator
[    0.852940] mali fde60000.gpu: Kernel DDK version g7p1-01bet0
[    0.853119] mali fde60000.gpu: Device initialization Deferred
[    0.853261] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.854313] brd: module loaded
[    0.863542] loop: module loaded
[    0.864194] zram: Added device: zram0
[    0.864369] lkdtm: No crash points registered, enable through debugfs
[    0.866132] ahci fc800000.sata: forcing port_map 0x0 -> 0x1
[    0.866213] ahci fc800000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    0.866248] ahci fc800000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
[    0.866284] ahci fc800000.sata: port 0 is not capable of FBS
[    0.867673] scsi host0: ahci
[    0.868172] ata1: SATA max UDMA/133 mmio [mem 0xfc800000-0xfc800fff] port 0x100 irq 11
[    0.872092] libphy: Fixed MDIO Bus: probed
[    0.872170] CAN device driver interface
[    0.876688] rk_gmac-dwmac fe010000.ethernet: no regulator found
[    0.876787] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
[    0.876810] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
[    0.876825] rk_gmac-dwmac fe010000.ethernet: RX delay(0x26).
[    0.876875] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[    0.876961] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
[    0.882001] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[    0.882333] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    0.882364] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
[    0.882391] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
[    0.882416] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
[    0.882438] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[    0.882459] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[    0.882520] rk_gmac-dwmac fe010000.ethernet: TSO supported
[    0.882536] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    0.882553] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[    1.013459] libphy: stmmac: probed
[    1.020600] rk_gmac-dwmac fe2a0000.ethernet: no regulator found
[    1.020647] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (input).
[    1.020665] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c).
[    1.020680] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f).
[    1.020701] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
[    1.020780] rk_gmac-dwmac fe2a0000.ethernet: clock input from PHY
[    1.025818] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII
[    1.026100] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.026123] rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5
[    1.026151] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported
[    1.026174] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported
[    1.026196] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
[    1.026216] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
[    1.026272] rk_gmac-dwmac fe2a0000.ethernet: TSO supported
[    1.026297] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.026321] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
[    1.156789] libphy: stmmac: probed
[    1.163459] usbcore: registered new interface driver rndis_wlan
[    1.163571] usbcore: registered new interface driver rtl8150
[    1.163661] usbcore: registered new interface driver r8152
[    1.163740] usbcore: registered new interface driver asix
[    1.163817] usbcore: registered new interface driver ax88179_178a
[    1.163890] usbcore: registered new interface driver cdc_ether
[    1.163971] usbcore: registered new interface driver rndis_host
[    1.164064] usbcore: registered new interface driver cdc_ncm
[    1.164144] usbcore: registered new interface driver qmi_wwan_q
[    1.164218] usbcore: registered new interface driver qmi_wwan
[    1.164298] usbcore: registered new interface driver cdc_mbim
[    1.165920] dwc3 fcc00000.dwc3: Failed to get clk 'ref': -2
[    1.173101] dwc3 fd000000.dwc3: Failed to get clk 'ref': -2
[    1.180031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.180142] ata1: SATA link down (SStatus 0 SControl 300)
[    1.180148] ehci-pci: EHCI PCI platform driver
[    1.180247] ehci-platform: EHCI generic platform driver
[    1.182631] ehci-platform fd800000.usb: EHCI Host Controller
[    1.182933] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
[    1.183582] ehci-platform fd800000.usb: irq 12, io mem 0xfd800000
[    1.196800] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[    1.197169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.197201] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.197232] usb usb1: Product: EHCI Host Controller
[    1.197254] usb usb1: Manufacturer: Linux 4.19.219 ehci_hcd
[    1.197276] usb usb1: SerialNumber: fd800000.usb
[    1.197932] hub 1-0:1.0: USB hub found
[    1.198008] hub 1-0:1.0: 1 port detected
[    1.200819] ehci-platform fd880000.usb: EHCI Host Controller
[    1.201105] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
[    1.201657] ehci-platform fd880000.usb: irq 14, io mem 0xfd880000
[    1.213468] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[    1.213781] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.213823] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.213847] usb usb2: Product: EHCI Host Controller
[    1.213870] usb usb2: Manufacturer: Linux 4.19.219 ehci_hcd
[    1.213891] usb usb2: SerialNumber: fd880000.usb
[    1.214512] hub 2-0:1.0: USB hub found
[    1.214575] hub 2-0:1.0: 1 port detected
[    1.215703] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.215774] ohci-platform: OHCI generic platform driver
[    1.216109] ohci-platform fd840000.usb: Generic Platform OHCI controller
[    1.216385] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
[    1.216861] ohci-platform fd840000.usb: irq 13, io mem 0xfd840000
[    1.277703] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.277737] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.277754] usb usb3: Product: Generic Platform OHCI controller
[    1.277768] usb usb3: Manufacturer: Linux 4.19.219 ohci_hcd
[    1.277781] usb usb3: SerialNumber: fd840000.usb
[    1.278420] hub 3-0:1.0: USB hub found
[    1.278496] hub 3-0:1.0: 1 port detected
[    1.279230] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[    1.279508] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
[    1.279870] ohci-platform fd8c0000.usb: irq 15, io mem 0xfd8c0000
[    1.337723] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.337754] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.337769] usb usb4: Product: Generic Platform OHCI controller
[    1.337783] usb usb4: Manufacturer: Linux 4.19.219 ohci_hcd
[    1.337796] usb usb4: SerialNumber: fd8c0000.usb
[    1.338420] hub 4-0:1.0: USB hub found
[    1.338493] hub 4-0:1.0: 1 port detected
[    1.340901] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.341229] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    1.342273] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000011002010010
[    1.342383] xhci-hcd xhci-hcd.0.auto: irq 88, io mem 0xfd000000
[    1.342851] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.342872] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.342889] usb usb5: Product: xHCI Host Controller
[    1.342916] usb usb5: Manufacturer: Linux 4.19.219 xhci-hcd
[    1.342938] usb usb5: SerialNumber: xhci-hcd.0.auto
[    1.343619] hub 5-0:1.0: USB hub found
[    1.343697] hub 5-0:1.0: 1 port detected
[    1.344205] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.344457] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    1.344500] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    1.344625] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.344854] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.344885] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.344909] usb usb6: Product: xHCI Host Controller
[    1.344932] usb usb6: Manufacturer: Linux 4.19.219 xhci-hcd
[    1.344946] usb usb6: SerialNumber: xhci-hcd.0.auto
[    1.345587] hub 6-0:1.0: USB hub found
[    1.345659] hub 6-0:1.0: 1 port detected
[    1.346358] usbcore: registered new interface driver cdc_acm
[    1.346386] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.346478] usbcore: registered new interface driver cdc_wdm
[    1.346876] usbcore: registered new interface driver uas
[    1.347101] usbcore: registered new interface driver usb-storage
[    1.347258] usbcore: registered new interface driver usbserial_generic
[    1.347309] usbserial: USB Serial support registered for generic
[    1.347403] usbcore: registered new interface driver cp210x
[    1.347456] usbserial: USB Serial support registered for cp210x
[    1.347601] usbcore: registered new interface driver ftdi_sio
[    1.347656] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.348008] usbcore: registered new interface driver keyspan
[    1.348051] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    1.348106] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    1.348160] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    1.348210] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    1.348308] usbcore: registered new interface driver option
[    1.348364] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.348847] usbcore: registered new interface driver oti6858
[    1.348902] usbserial: USB Serial support registered for oti6858
[    1.348996] usbcore: registered new interface driver pl2303
[    1.349040] usbserial: USB Serial support registered for pl2303
[    1.349160] usbcore: registered new interface driver qcserial
[    1.349217] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.349348] usbcore: registered new interface driver sierra
[    1.349405] usbserial: USB Serial support registered for Sierra USB modem
[    1.351287] usbcore: registered new interface driver usbtouchscreen
[    1.351365] ============ himax_hx83102_init 1742 jjlook ==========
[    1.351389] ============ himax_hx83102_probe 1725 jjlook ==========
[    1.351481] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0
[    1.351499] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0
[    1.351949] .. rk pwm remotectl v2.0 init
[    1.352335] input: fe6e0030.pwm as /devices/platform/fe6e0030.pwm/input/input0
[    1.352831] remotectl-pwm fe6e0030.pwm: pwm version is 0x2130000
[    1.352875] remotectl-pwm fe6e0030.pwm: cannot find PWR IRQ
[    1.352893] remotectl-pwm fe6e0030.pwm: pwm sip wakeup config error!!
[    1.352916] remotectl-pwm fe6e0030.pwm: Donot support ATF Wakeup
[    1.353930] i2c /dev entries driver
[    1.356188] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[    1.358039] vdd_cpu: supplied by vcc5v0_sys
[    1.363239] rk808 0-0020: chip id: 0x8090
[    1.363318] rk808 0-0020: No cache defaults, reading back from HW
[    1.387116] rk808 0-0020: source: on=0x40, off=0x00
[    1.387155] rk808 0-0020: support dcdc3 fb mode:-22, 63
[    1.387175] rk808 0-0020: support pmic reset mode:0,0
[    1.392554] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.392624] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.392748] vdd_logic: supplied by vcc3v3_sys
[    1.393301] vdd_gpu: supplied by vcc3v3_sys
[    1.393829] vcc_ddr: supplied by vcc3v3_sys
[    1.394300] vdd_npu: supplied by vcc3v3_sys
[    1.394788] vcc_1v8: supplied by vcc3v3_sys
[    1.395237] vdda0v9_image: supplied by vcc3v3_sys
[    1.395712] vdda_0v9: supplied by vcc3v3_sys
[    1.396159] vdda0v9_pmu: supplied by vcc3v3_sys
[    1.396604] vccio_acodec: supplied by vcc3v3_sys
[    1.397102] vccio_sd: supplied by vcc3v3_sys
[    1.397567] vcc3v3_pmu: supplied by vcc3v3_sys
[    1.398037] vcca_1v8: supplied by vcc3v3_sys
[    1.398503] vcca1v8_pmu: supplied by vcc3v3_sys
[    1.398972] vcca1v8_image: supplied by vcc3v3_sys
[    1.399425] vcc_3v3: supplied by vcc3v3_sys
[    1.399869] vcc3v3_sd: supplied by vcc3v3_sys
[    1.400518] rk817-battery rk817-battery: Failed to find matching dt id
[    1.400846] rk817-charger rk817-charger: Failed to find matching dt id
[    1.404289] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1
[    1.404908] rk808-rtc rk808-rtc: device is disabled
[    1.404951] rk808-rtc: probe of rk808-rtc failed with error -22
[    1.407148] pca953x 1-0021: 1-0021 supply vcc not found, using dummy regulator
[    1.407276] pca953x 1-0021: Linked as a consumer to regulator.0
[    1.593467] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[    1.735912] usb 5-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.91
[    1.735949] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.735964] usb 5-1: Product: USB2.1 Hub
[    1.735978] usb 5-1: Manufacturer: GenesysLogic
[    1.792980] hub 5-1:1.0: USB hub found
[    1.793301] hub 5-1:1.0: 4 ports detected
[    1.820137] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[    1.856950] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    1.876434] usb 6-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.91
[    1.876469] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.876487] usb 6-1: Product: USB3.2 Hub
[    1.876501] usb 6-1: Manufacturer: GenesysLogic
[    1.904940] hub 6-1:1.0: USB hub found
[    1.905323] hub 6-1:1.0: 4 ports detected
[    2.307010] input: himax-touchscreen as /devices/virtual/input/input2
[    2.317609] rtc-hym8563 5-0051: rtc core: registered hym8563 as rtc0
[    2.318699] rtc-hym8563 5-0051: setting system clock to 2022-04-03 07:53:56 UTC (1648972436)
[    2.320387] gsensor_mc3230 5-004c: sensor_register_device: gs_mc3230, id = 27
[    2.320424] i2c i2c-5: sensor_probe: gs_mc3230,0000000086adf963
[    2.320484] gsensor_mc3230 5-004c: sensor_chip_init:gs_mc3230:devid=0x0,ops=0x0000000035eb426b
[    2.358941] phy phy-fe8a0000.usb2-phy.1: charger = USB_CDP_CHARGER
[    2.360284] [Gsensor] init_3230_ctl_data 457 : error: -6
[    2.360315] gsensor_mc3230 5-004c: sensor_initial:fail to init sensor
[    2.360331] gsensor_mc3230 5-004c: sensor_chip_init:fail to init sensor
[    2.360345] i2c i2c-5: sensor_probe failed -2
[    2.360345]
[    2.362387] iommu: Adding device fdfe0000.rkcif to group 7
[    2.362444] rkcifhw fdfe0000.rkcif: Linked as a consumer to fdfe0800.iommu
[    2.363085] rkcifhw fdfe0000.rkcif: can't request region for resource [mem 0xfdfe0000-0xfdfe7fff]
[    2.363533] rkcif rkcif_mipi_lvds: rkcif driver version: v00.01.0a
[    2.363616] rkcif rkcif_mipi_lvds: attach to cif hw node
[    2.363643] rkcif rkcif_mipi_lvds: rkcif wait line 0
[    2.367163] rkcif rkcif_mipi_lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
[    2.367206] rockchip-mipi-csi2: Async registered subdev
[    2.367239] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif_mipi_lvds!
[    2.368893] iommu: Adding device fdff0000.rkisp to group 8
[    2.368955] rkisp_hw fdff0000.rkisp: Linked as a consumer to fdff1a00.iommu
[    2.369221] rkisp_hw fdff0000.rkisp: is_thunderboot: 0
[    2.369242] rkisp_hw fdff0000.rkisp: max input:0x0@0fps
[    2.369275] rkisp_hw fdff0000.rkisp: can't request region for resource [mem 0xfdff0000-0xfdffffff]
[    2.370587] rkisp rkisp-vir0: rkisp driver version: v01.07.00
[    2.370958] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
[    2.370999] rkisp rkisp-vir0: Entity type for entity rkisp-csi-subdev was not initialized!
[    2.373242] rkisp rkisp-vir1: rkisp driver version: v01.07.00
[    2.373635] rkisp rkisp-vir1: Entity type for entity rkisp-isp-subdev was not initialized!
[    2.373674] rkisp rkisp-vir1: Entity type for entity rkisp-csi-subdev was not initialized!
[    2.376305] usbcore: registered new interface driver uvcvideo
[    2.376335] USB Video Class driver (1.1.1)
[    2.376800] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.31
[    2.376868] rockchip-iodomain fdc20000.syscon:io-domains: pmuio1(3300000 uV) supplied by vcc3v3_pmu
[    2.377022] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu
[    2.377184] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.29
[    2.377246] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) supplied by vccio_acodec
[    2.377448] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.30
[    2.377509] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd
[    2.377642] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.25
[    2.377688] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8
[    2.377846] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.35
[    2.377908] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3
[    2.378051] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8
[    2.378217] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3
[    2.382793] rockchip-thermal fe710000.tsadc: tsadc is probed successfully!
[    2.384517] Bluetooth: HCI UART driver ver 2.3
[    2.384541] Bluetooth: HCI UART protocol H4 registered
[    2.384565] Bluetooth: HCI UART protocol ATH3K registered
[    2.384868] Bluetooth: HCI UART protocol Broadcom registered
[    2.384996] usbcore: registered new interface driver bfusb
[    2.385105] usbcore: registered new interface driver btusb
[    2.385497] cpu cpu0: leakage=26
[    2.386206] cpu cpu0: Linked as a consumer to regulator.20
[    2.413261] cpu cpu0: temp=33125, pvtm=88585 (88767 + -182)
[    2.416401] cpu cpu0: Dropping the link to regulator.20
[    2.416473] cpu cpu0: pvtm-volt-sel=1
[    2.417489] cpu cpu0: Linked as a consumer to regulator.20
[    2.417572] cpu cpu0: Dropping the link to regulator.20
[    2.418274] cpu cpu0: Linked as a consumer to regulator.20
[    2.419373] cpu cpu0: avs=0
[    2.419473] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
[    2.419819] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.423633] cpu cpu0: failed to find power_model node
[    2.425332] sdhci: Secure Digital Host Controller Interface driver
[    2.425360] sdhci: Copyright(c) Pierre Ossman
[    2.425369] Synopsys Designware Multimedia Card Interface Driver
[    2.426486] dwmmc_rockchip fe000000.dwmmc: IDMAC supports 32-bit address mode.
[    2.426866] dwmmc_rockchip fe000000.dwmmc: Using internal DMA controller.
[    2.426885] dwmmc_rockchip fe000000.dwmmc: Version ID is 270a
[    2.426970] dwmmc_rockchip fe000000.dwmmc: DW MMC controller at irq 45,32 bit host data width,256 deep fifo
[    2.427153] dwmmc_rockchip fe000000.dwmmc: allocated mmc-pwrseq
[    2.427179] mmc_host mmc3: card is non-removable.
[    2.544384] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    2.558434] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode.
[    2.559355] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.
[    2.559384] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a
[    2.559501] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 53,32 bit host data width,256 deep fifo
[    2.559686] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.36
[    2.559783] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.30
[    2.575246] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    2.588188] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.589571] mmc0: Unknown controller version (5). You may experience problems.
[    2.592249] mmc3: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.594012] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.595805] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.599348] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.620133] mmc0: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA
[    2.623992] rgb13h-flash flash-led: driver version: 00.01.01
[    2.624033] rgb13h-flash flash-led: Unable to claim enable-gpio
[    2.624998] hidraw: raw HID events driver (C) Jiri Kosina
[    2.625348] usbcore: registered new interface driver usbhid
[    2.625382] usbhid: USB HID core driver
[    2.625772] rockchip,bus bus-npu: Linked as a consumer to regulator.21
[    2.625800] rockchip,bus bus-npu: Failed to get leakage
[    2.625863] rockchip,bus bus-npu: pvtm = 88585, form pvtm_value
[    2.625884] rockchip,bus bus-npu: pvtm-volt-sel=1
[    2.626210] rockchip,bus bus-npu: avs=0
[    2.628819] rockchip-saradc fe720000.saradc: Linked as a consumer to regulator.32
[    2.630019] rksfc_base v1.1 2016-01-08
[    2.630818] rksfc fe300000.sfc: rksfc_probe clk rate = 50000000
[    2.630873] rkflash_dev_init enter
[    2.630892] sfc nor id: ef 60 19
[    2.630911] rkflash[1] init success
[    2.631849] sfc_nor_mtd_init register mtd succuss
[    2.631866] rkflash_dev_init device register as mtd dev, ret= 0
[    2.632673] usbcore: registered new interface driver snd-usb-audio
[    2.635371] rk817-codec rk817-codec: DMA mask not set
[    2.636248] rk817_codec_parse_dt_property: rk809 hp adc effective value of detection 976~1024
[    2.636277] invalid rk817->hp_det_gpio: -2
[    2.636289] invalid gpio: -2
[    2.642679] Initializing XFRM netlink socket
[    2.643208] NET: Registered protocol family 10
[    2.644066] Segment Routing with IPv6
[    2.644187] NET: Registered protocol family 17
[    2.644218] NET: Registered protocol family 15
[    2.644277] can: controller area network core (rev 20170425 abi 9)
[    2.644409] NET: Registered protocol family 29
[    2.644441] can: raw protocol (rev 20170425)
[    2.644457] can: broadcast manager protocol (rev 20170425 t)
[    2.644478] can: netlink gateway (rev 20170425) max_hops=1
[    2.644771] Bluetooth: RFCOMM socket layer initialized
[    2.644814] Bluetooth: RFCOMM ver 1.11
[    2.644829] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.644848] Bluetooth: HIDP socket layer initialized
[    2.644911] [BT_RFKILL]: Enter rfkill_rk_init
[    2.644925] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.645525] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.645659] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275s
[    2.645675] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.645687] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.645737] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 124, flags = 0.
[    2.645766] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.645779] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.645792] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    2.645804] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.646565] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 73.
[    2.646613] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 96.
[    2.646636] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 109.
[    2.646705] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 95.
[    2.646793] [BT_RFKILL]: Request irq for bt wakeup host
[    2.646864] [BT_RFKILL]: ** disable irq
[    2.646972] [BT_RFKILL]: bt_default device registered.
[    2.647132] Key type dns_resolver registered
[    2.647395] flash vendor_init_thread!
[    2.647409] flash vendor storage:20170308 ret = -1
[    2.648261] gc2053 4-0037: driver version: 00.01.01
[    2.648306] gc2053 4-0037: Failed to get reset-gpios
[    2.650702] gc2053 4-0037: 4-0037 supply dovdd not found, using dummy regulator
[    2.650770] gc2053 4-0037: Linked as a consumer to regulator.0
[    2.650804] gc2053 4-0037: Failed to get supply 'avdd': -517
[    2.650851] gc2053 4-0037: Dropping the link to regulator.0
[    2.650870] gc2053 4-0037: Failed to get power regulators
[    2.651099] gc2093 4-007e: driver version: 00.01.01
[    2.651170] gc2093 4-007e: Failed to get reset-gpios
[    2.652156] mmc0: new HS200 MMC card at address 0001
[    2.652400] gc2093 4-007e: 4-007e supply dovdd not found, using dummy regulator
[    2.652461] gc2093 4-007e: Linked as a consumer to regulator.0
[    2.652498] gc2093 4-007e: Failed to get supply 'avdd': -517
[    2.652563] gc2093 4-007e: Dropping the link to regulator.0
[    2.652593] gc2093 4-007e: Failed to get regulators
[    2.652911] mmcblk0: mmc0:0001 TX2932 29.1 GiB
[    2.653352] mmcblk0boot0: mmc0:0001 TX2932 partition 1 4.00 MiB
[    2.653833] mmcblk0boot1: mmc0:0001 TX2932 partition 2 4.00 MiB
[    2.654027] mmcblk0rpmb: mmc0:0001 TX2932 partition 3 4.00 MiB, chardev (239:0)
[    2.654300] Loading compiled-in X.509 certificates
[    2.654766] pstore: Using compression: deflate
[    2.655467] rga2: Driver loaded successfully ver:3.2.63318
[    2.655808] rga2: Module initialized.
[    2.656410]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.682117] rockchip-drm display-subsystem: dmc is disabled
[    2.682385] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x3f, primary plane phy id: 4
[    2.682402] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x0, primary plane phy id: -1
[    2.682421] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
[    2.682594] [drm] failed to init overlay plane Cluster0-win1
[    2.682640] [drm] failed to init overlay plane Cluster1-win1
[    2.682721] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff8008fca6d8)
[    2.682765] rockchip-drm display-subsystem: bound fe060000.dsi (ops 0xffffff8008fcf2c0)
[    2.682779] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.682789] [drm] No driver support for vblank timestamp query.
[    2.683447] mmc_host mmc3: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    2.688969] dwmmc_rockchip fe000000.dwmmc: Successfully tuned phase to 254
[    2.690671] mmc3: new ultra high speed SDR104 SDIO card at address 0001
[    2.699597] fbcon: Deferring console take-over
[    2.699624] rockchip-drm display-subsystem: fb0:  frame buffer device
[    2.700311] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
[    2.701011] mali fde60000.gpu: Kernel DDK version g7p1-01bet0
[    2.701059] input: adc-keys as /devices/platform/adc-keys/input/input3
[    2.701188] mali fde60000.gpu: Linked as a consumer to regulator.22
[    2.701334] mali fde60000.gpu: dev_pm_opp_set_regulators: no regulator (shadercores) found: -19
[    2.701429] mali fde60000.gpu: leakage=8
[    2.701869] mali fde60000.gpu: avs=0
[    2.701893] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 112; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    2.702233] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
[    2.702312] mali fde60000.gpu: No priority control manager is configured
[    2.702323] mali fde60000.gpu: No memory group manager is configured
[    2.702784] mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    2.703384] mali fde60000.gpu: Probed as mali0
[    2.706834] asoc-simple-card rk809-sound: rk817-hifi <-> fe410000.i2s mapping ok
[    2.706864] asoc-simple-card rk809-sound: ASoC: no source widget found for MICBIAS1
[    2.706877] asoc-simple-card rk809-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
[    2.706888] asoc-simple-card rk809-sound: ASoC: no source widget found for Mic Jack
[    2.706898] asoc-simple-card rk809-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P
[    2.706908] asoc-simple-card rk809-sound: ASoC: no source widget found for HPOL
[    2.706918] asoc-simple-card rk809-sound: ASoC: Failed to add route HPOL -> direct -> Headphone Jack
[    2.706928] asoc-simple-card rk809-sound: ASoC: no source widget found for HPOR
[    2.706937] asoc-simple-card rk809-sound: ASoC: Failed to add route HPOR -> direct -> Headphone Jack
[    2.708610] gc2053 4-0037: driver version: 00.01.01
[    2.708660] gc2053 4-0037: Failed to get reset-gpios
[    2.711062] gc2053 4-0037: 4-0037 supply dovdd not found, using dummy regulator
[    2.711141] gc2053 4-0037: Linked as a consumer to regulator.0
[    2.711212] gc2053 4-0037: Linked as a consumer to regulator.37
[    2.711250] gc2053 4-0037: 4-0037 supply dvdd not found, using dummy regulator
[    2.711294] gc2053 4-0037: lane_num(2)  pixel_rate(118800000)
[    2.711310] gc2053 4-0037: could not get default pinstate
[    2.711317] gc2053 4-0037: could not get sleep pinstate
[    2.717654] gc2053 4-0037: gc2053 read reg(0xf0 val:0x0) failed !
[    2.717846] gc2053 4-0037: gc2053 read reg(0xf1 val:0x0) failed !
[    2.717862] gc2053 4-0037: gc2053_read_reg failed (-6)
[    2.719031] gc2053 4-0037: Dropping the link to regulator.37
[    2.719269] gc2093 4-007e: driver version: 00.01.01
[    2.719344] gc2093 4-007e: Failed to get reset-gpios
[    2.720514] gc2093 4-007e: 4-007e supply dovdd not found, using dummy regulator
[    2.720560] gc2093 4-007e: Linked as a consumer to regulator.0
[    2.720614] gc2093 4-007e: Linked as a consumer to regulator.37
[    2.720650] gc2093 4-007e: 4-007e supply dvdd not found, using dummy regulator
[    2.743764] gc2093 4-007e: i2c read failed at addr: 3f0
[    2.743958] gc2093 4-007e: i2c read failed at addr: 3f1
[    2.743973] gc2093 4-007e: Failed to read sensor id, (-6)
[    2.744719] gc2093 4-007e: Dropping the link to regulator.37
[    2.745973] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max

[    2.779918] vendor storage:20190527 ret = 0
[    2.810816] devfreq fde60000.gpu: Couldn't update frequency transition information.
[    2.898943] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[    2.919589] wk2xxx_serial_init()
[    2.919605] wk2xxx_request_port
[    2.919613] ttysWK0 at I/O 0x1 (irq = 117, base_baud = 460800) is a wk2xxx
[    2.919821] uart_add_one_port success for line i:= 0 with right 0
[    2.919834] wk2xxx_request_port
[    2.919844] ttysWK1 at I/O 0x2 (irq = 117, base_baud = 460800) is a wk2xxx
[    2.920003] uart_add_one_port success for line i:= 1 with right 0
[    2.920017] wk2xxx_request_port
[    2.920027] ttysWK2 at I/O 0x3 (irq = 117, base_baud = 460800) is a wk2xxx
[    2.920183] uart_add_one_port success for line i:= 2 with right 0
[    2.920196] wk2xxx_request_port
[    2.920206] ttysWK3 at I/O 0x4 (irq = 117, base_baud = 460800) is a wk2xxx
[    2.920341] uart_add_one_port success for line i:= 3 with right 0
[    2.920352] uart_add_one_port = 0x0
[    2.920950] register spi return v = :0
[    2.920965] dhd_module_init: in Dongle Host Driver, version 100.10.545.9 (r826445-20200316-8)
[    2.920975] ======== dhd_wlan_init_plat_data ========
[    2.920983] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    2.921032] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=118, oob_irq_flags=0x414
[    2.921042] dhd_wlan_init_gpio: WL_REG_ON=-1
[    2.921049] dhd_wifi_platform_load: Enter
[    2.921058] Power-up adapter 'DHD generic adapter'
[    2.922058] wifi_platform_set_power = 1, delay: 200 msec
[    2.922076] ======== PULL WL_REG_ON(-1) HIGH! ========
[    2.922085] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    2.922094] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[    2.922101] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
[    3.226815] wifi_platform_bus_enumerate device present 1
[    3.226840] ======== Card detection to detect SDIO card! ========
[    3.226848] mmc3:mmc host rescan start!
[    3.242966] bcmsdh_register: register client driver
[    3.243099] bcmsdh_sdmmc_probe: Enter num=1
[    3.243712] bcmsdh_sdmmc_probe: Enter num=2
[    3.243722] bus num (host idx)=3, slot num (rca)=1
[    3.243733] found adapter info 'DHD generic adapter'
[    3.243789] sdioh_attach: set sd_f2_blocksize 256
[    3.243839] sdioh_attach: sd clock rate = 0
[    3.244156] dhdsdio_probe : no mutex held. set lock
[    3.244291] F1 signature read @0x18000000=0x1042aae8
[    3.247827] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4
[    3.248465] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
[    3.248541] [dhd] dhd_conf_set_chiprev : chip=0xaae8, chiprev=2
[    3.249109] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.249120] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.249131] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.249140] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.249148] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.249393] dhd_log_dump_init: kernel log buf size = 256KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 38KB
[    3.250232] dhd_attach(): thread:dhd_watchdog_thread:66 started
[    3.250371] dhd_attach(): thread:dhd_dpc:67 started
[    3.250494] dhd_attach(): thread:dhd_rxf:68 started
[    3.250509] dhd_deferred_work_init: work queue initialized
[    3.250522] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[    3.250585] get_mem_val_from_file: File [/data/misc/wifi/.memdump.info] doesn't exist
[    3.250594] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[    3.250608] sdioh_cis_read: func_cis_ptr[0]=0x1070
[    3.258422] dhdsdio_probe_init: making DHD_BUS_DOWN
[    3.258562] Dongle Host Driver, version 100.10.545.9 (r826445-20200316-8)
[    3.259025] Register interface [wlan0]  MAC: 10:2c:6b:7f:b9:b4
[    3.259025]
[    3.259083] dhd_dbg_detach_pkt_monitor, 2100
[    3.259097] dhd_bus_devreset: == Power OFF ==
[    3.259290] dhd_bus_stop: making DHD_BUS_DOWN
[    3.259324] bcmsdh_oob_intr_unregister: Enter
[    3.259334] bcmsdh_oob_intr_unregister: irq is not registered
[    3.259347] dhd_bus_devreset: making dhdpub up FALSE
[    3.259358] dhd_txglom_enable: enable 0
[    3.259366] dhd_bus_devreset: making DHD_BUS_DOWN
[    3.259375] dhd_bus_devreset:  WLAN OFF DONE
[    3.259414] wifi_platform_set_power = 0, delay: 0 msec
[    3.259422] ======== PULL WL_REG_ON(-1) LOW! ========
[    3.259428] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    3.259442] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[    3.259451] [WLAN_RFKILL]: wifi shut off power [GPIO-1-1]
[    3.259462] dhdsdio_probe : the lock is released.
[    3.260128] dhd_module_init: Exit err=0
[    3.260489] ==gsl_ts_init==
[    3.260556] ret=0
[    3.261115] rkcif_mipi_lvds: get_remote_sensor: remote pad is null
[    3.261122] rkcif_mipi_lvds: rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    3.261133] rkisp-vir1: update sensor failed
[    3.261273] rkcif rkcif_mipi_lvds: clear unready subdev num: 1
[    3.261287] rockchip-csi2-dphy2: No link between dphy and sensor
[    3.261484] rockchip-csi2-dphy2: No link between dphy and sensor
[    3.261504] rkcif_mipi_lvds: Async subdev notifier completed
[    3.262058] iommu: Adding device fde40000.npu to group 0
[    3.262082] RKNPU fde40000.npu: Linked as a consumer to fde4b000.iommu
[    3.262474] RKNPU fde40000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    3.262587] RKNPU fde40000.npu: Linked as a consumer to regulator.24
[    3.262610] RKNPU fde40000.npu: can't request region for resource [mem 0xfde40000-0xfde4ffff]
[    3.262951] [drm] Initialized rknpu 0.4.2 20210701 for fde40000.npu on minor 1
[    3.263187] RKNPU fde40000.npu: leakage=4
[    3.263638] RKNPU fde40000.npu: avs=0
[    3.264188] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.264211] RKNPU fde40000.npu: failed to find power_model node
[    3.264222] RKNPU fde40000.npu: RKNPU: failed to initialize power model
[    3.264232] RKNPU fde40000.npu: RKNPU: failed to get dynamic-coefficient
[    3.265200] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.269641] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.270264] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.270282] cfg80211: failed to load regulatory.db
[    3.271006] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    3.271642] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '11:31:02', on 'Apr  3 2022'.
[    3.272030] Mali:
[    3.272031] Mali device driver loaded
[    3.272098] rkisp rkisp-vir0: clear unready subdev num: 1
[    3.272112] rockchip-csi2-dphy1: No link between dphy and sensor
[    3.272444] rockchip-csi2-dphy1: No link between dphy and sensor
[    3.272457] rkisp-vir0: update sensor failed
[    3.272469] rkisp rkisp-vir1: clear unready subdev num: 0
[    3.279561] ret 1024 0
[    3.279878] ALSA device list:
[    3.279890]   #0: rockchip,rk809-codec
[    3.282125] Freeing unused kernel memory: 1600K
[    3.296967] Run /init as init process
Loading, please wait...
/dev/console is Ok
starting version 237
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[    3.926852] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
Warning: fsck not present, so skipping root file system
[    4.168733] EXT4-fs (mmcblk0p7): warning: mounting unchecked fs, running e2fsck is recommended
[    4.170670] EXT4-fs (mmcblk0p7): mounted filesystem without journal. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=device opts='dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' per kernel cmdline
[    4.366983] EXT4-fs (mmcblk0p8): recovery complete
[    4.367518] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
ln: /root/var/lib/docker: No such file or directory
Success: overlayroot: configured root with 'device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' using overlay per kernel cmdline
Warning: Something odd, no /lib/modules/4.19.219 in initramfs.
done.
mount: mounting /run on /root/run failed: No such file or directory
run-init: /sbin/init: No such file or directory
Target filesystem doesn't have requested /sbin/init.
run-init: /sbin/init: No such file or directory
run-init: /etc/init: Permission denied
[    4.940433] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[    5.002444] [pid=340][INIT][INFO] [init_watchdog.c:76)] watchdoge started (interval 10, margin 2), fd = 3
[    5.002444]
[    5.007226] EXT4-fs (mmcblk0p6): mounted filesystem without journal. Opts: barrier=1
[    5.509096] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger init
[    5.509964] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /system/etc/prop.default
[    5.510721] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/stune/foreground', err 2.
[    5.510866] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/stune/background', err 2.
[    5.511000] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/stune/top-app', err 2.
[    5.511107] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/stune/rt', err 2.
[    5.511551] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune, err 2.
[    5.511961] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/foreground, err 2.
[    5.512370] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/background, err 2.
[    5.512777] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/top-app, err 2.
[    5.513182] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/rt, err 2.
[    5.513668] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/tasks, err 2.
[    5.514071] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/foreground/tasks, err 2.
[    5.514472] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/background/tasks, err 2.
[    5.514853] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/top-app/tasks, err 2.
[    5.515253] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/stune/rt/tasks, err 2.
[    5.515413] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/stune/tasks " mode to 0664, err = 2
[    5.515557] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/stune/foreground/tasks " mode to 0664, err = 2
[    5.515700] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/stune/background/tasks " mode to 0664, err = 2
[    5.515844] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/stune/top-app/tasks " mode to 0664, err = 2
[    5.515987] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/stune/rt/tasks " mode to 0664, err = 2
[    5.516124] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/blkio/background', err 2.
[    5.516521] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/blkio, err 2.
[    5.517008] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/blkio/background, err 2.
[    5.517419] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/blkio/tasks, err 2.
[    5.517820] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/blkio/background/tasks, err 2.
[    5.517976] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/blkio/tasks " mode to 0664, err = 2
[    5.518121] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/blkio/background/tasks " mode to 0664, err = 2
[    5.518926] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /config/sdcardfs " mode to 0770, err = 2
[    5.519366] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /config/sdcardfs, err 2.
[    5.525936] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuctl, err 2.
[    5.526351] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuctl/tasks, err 2.
[    5.526513] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cpuctl/tasks " mode to 0666, err = 2
[    5.526927] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/cpuset/foreground', err 2.
[    5.527086] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/cpus
[    5.527236] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/mems
[    5.527376] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/cpuset/background', err 2.
[    5.527525] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/cpus
[    5.527676] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/mems
[    5.527815] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/cpuset/system-background', err 2.
[    5.527968] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/cpus
[    5.528121] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/mems
[    5.528256] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/cpuset/restricted', err 2.
[    5.528407] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/cpus
[    5.528557] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/mems
[    5.528673] [pid=1][INIT][ERROR] [init_common_cmds.c:301)] DoMkDir, failed for '/dev/cpuset/top-app', err 2.
[    5.528820] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/cpus
[    5.528968] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /dev/cpuset/mems
[    5.529370] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset, err 2.
[    5.529781] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/foreground, err 2.
[    5.530286] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/background, err 2.
[    5.530667] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/system-background, err 2.
[    5.531076] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/top-app, err 2.
[    5.531480] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/restricted, err 2.
[    5.531857] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/tasks, err 2.
[    5.532260] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/foreground/tasks, err 2.
[    5.532663] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/background/tasks, err 2.
[    5.533067] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/system-background/tasks, err 2.
[    5.533556] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/top-app/tasks, err 2.
[    5.533971] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cpuset/restricted/tasks, err 2.
[    5.534126] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cpuset/system-background " mode to 0775, err = 2
[    5.534275] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cpuset/foreground/tasks " mode to 0664, err = 2
[    5.534414] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cpuset/background/tasks " mode to 0664, err = 2
[    5.534560] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cpuset/system-background/tasks " mode to 0664, err = 2
[    5.534685] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cpuset/top-app/tasks " mode to 0664, err = 2
[    5.534829] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cpuset/restricted/tasks " mode to 0664, err = 2
[    5.534971] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cpuset/tasks " mode to 0664, err = 2
[    5.535381] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /proc/pressure/memory, err 2.
[    5.535539] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /proc/pressure/memory " mode to 0664, err = 2
[    5.536027] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /proc/net/xt_qtaguid/ctrl, err 2.
[    5.536503] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /proc/net/xt_qtaguid/stats, err 2.
[    5.536656] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/xt_qtaguid " mode to 0644, err = 2
[    5.537106] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/cg2_bpf, err 2.
[    5.537234] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/cg2_bpf " mode to 0600, err = 2
[    5.537419] [pid=1][INIT][ERROR] [init_common_cmds.c:409)] Failed to mount for /sys/fs/bpf, err 2.
[    5.538195] Registered swp emulation handler
[    5.539488] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    5.540231] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    5.547793] [pid=1][INIT][INFO] [init_common_service.c:226)] service samgr starting pid 342
[    5.548952] [pid=1][INIT][ERROR] [init_common_cmds.c:409)] Failed to mount for /dev/memcg, err 2.
[    5.549739] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/memcg/tasks, err 2.
[    5.550222] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/memcg/memory.oom_control, err 2.
[    5.550645] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/memcg/cgroup.event_control, err 2.
[    5.551058] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/memcg/memory.pressure_level, err 2.
[    5.551281] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/memcg/tasks " mode to 0755, err = 2
[    5.551409] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/memcg/memory.oom_control " mode to 0755, err = 2
[    5.551464] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/memcg/cgroup.event_control " mode to 0755, err = 2
[    5.551499] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/memcg/memory.pressure_level " mode to 0755, err = 2
[    5.554707] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger post-init
[    5.554748] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger early-fs
[    5.554777] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger fs
[    5.554805] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger post-fs
[    5.554829] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger late-fs
[    5.554847] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger post-fs-data
[    5.554871] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger load_persist_props_action
[    5.554898] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger boot
[    5.555451] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/fence/enable " mode to 0666, err = 2
[    5.555594] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/i2c/smbus_read/enable " mode to 0666, err = 2
[    5.555644] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/i2c/smbus_write/enable " mode to 0666, err = 2
[    5.555693] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/i2c/smbus_result/enable " mode to 0666, err = 2
[    5.555742] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/i2c/smbus_reply/enable " mode to 0666, err = 2
[    5.555813] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/kmem/ion_heap_grow/enable " mode to 0666, err = 2
[    5.555856] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/kmem/ion_heap_shrink/enable " mode to 0666, err = 2
[    5.555911] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/lowmemorykiller/enable " mode to 0666, err = 2
[    5.555953] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/lowmemorykiller/lowmemory_kill/enable " mode to 0666, err = 2
[    5.556002] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/mm_event/mm_event_record/enable " mode to 0666, err = 2
[    5.556221] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/sched/sched_cpu_hotplug/enable " mode to 0666, err = 2
[    5.556366] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/sync/enable " mode to 0666, err = 2
[    5.556692] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/f2fs/f2fs_get_data_block/enable " mode to 0666, err = 2
[    5.556813] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/f2fs/f2fs_iget/enable " mode to 0666, err = 2
[    5.556865] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/f2fs/f2fs_sync_file_enter/enable " mode to 0666, err = 2
[    5.556914] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/f2fs/f2fs_sync_file_exit/enable " mode to 0666, err = 2
[    5.556963] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/f2fs/f2fs_write_begin/enable " mode to 0666, err = 2
[    5.557012] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/events/f2fs/f2fs_write_end/enable " mode to 0666, err = 2
[    5.557115] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/options/print-tgid " mode to 0666, err = 2
[    5.557250] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu4/trace " mode to 0666, err = 2
[    5.557300] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu5/trace " mode to 0666, err = 2
[    5.557348] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu6/trace " mode to 0666, err = 2
[    5.557395] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu7/trace " mode to 0666, err = 2
[    5.557442] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu8/trace " mode to 0666, err = 2
[    5.557490] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu9/trace " mode to 0666, err = 2
[    5.557538] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu10/trace " mode to 0666, err = 2
[    5.557586] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu11/trace " mode to 0666, err = 2
[    5.557633] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu12/trace " mode to 0666, err = 2
[    5.557683] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu13/trace " mode to 0666, err = 2
[    5.557731] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu14/trace " mode to 0666, err = 2
[    5.557779] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/debug/tracing/per_cpu/cpu15/trace " mode to 0666, err = 2
[    5.557881] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/buffer_size_kb " mode to 0666, err = 2
[    5.557926] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/saved_cmdlines_size " mode to 0666, err = 2
[    5.557970] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/trace " mode to 0666, err = 2
[    5.558013] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/trace_clock " mode to 0666, err = 2
[    5.558057] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/trace_marker " mode to 0222, err = 2
[    5.558100] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/tracing_on " mode to 0666, err = 2
[    5.558144] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/binder/binder_lock/enable " mode to 0666, err = 2
[    5.558188] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/binder/binder_locked/enable " mode to 0666, err = 2
[    5.558232] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/binder/binder_unlock/enable " mode to 0666, err = 2
[    5.558270] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/binder/binder_transaction/enable " mode to 0666, err = 2
[    5.558315] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/binder/binder_transaction_received/enable " mode to 0666, err = 2
[    5.558361] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/binder/binder_transaction_alloc_buf/enable " mode to 0666, err = 2
[    5.558405] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/cgroup/enable " mode to 0666, err = 2
[    5.558449] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/cpufreq_interactive/enable " mode to 0666, err = 2
[    5.558495] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/dma_fence/enable " mode to 0666, err = 2
[    5.558538] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/fence/enable " mode to 0666, err = 2
[    5.558582] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/enable " mode to 0666, err = 2
[    5.558625] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/i2c_read/enable " mode to 0666, err = 2
[    5.558669] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/i2c_write/enable " mode to 0666, err = 2
[    5.558713] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/i2c_result/enable " mode to 0666, err = 2
[    5.558750] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/i2c_reply/enable " mode to 0666, err = 2
[    5.558800] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/smbus_read/enable " mode to 0666, err = 2
[    5.558845] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/smbus_write/enable " mode to 0666, err = 2
[    5.558888] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/smbus_result/enable " mode to 0666, err = 2
[    5.558932] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/i2c/smbus_reply/enable " mode to 0666, err = 2
[    5.558977] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/kmem/rss_stat/enable " mode to 0666, err = 2
[    5.559021] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/kmem/ion_heap_grow/enable " mode to 0666, err = 2
[    5.559065] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/kmem/ion_heap_shrink/enable " mode to 0666, err = 2
[    5.559109] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/lowmemorykiller/enable " mode to 0666, err = 2
[    5.559153] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/lowmemorykiller/lowmemory_kill/enable " mode to 0666, err = 2
[    5.559198] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/mm_event/mm_event_record/enable " mode to 0666, err = 2
[    5.559235] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/oom/oom_score_adj_update/enable " mode to 0666, err = 2
[    5.559279] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/power/cpu_frequency/enable " mode to 0666, err = 2
[    5.559322] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/power/cpu_idle/enable " mode to 0666, err = 2
[    5.559366] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/power/clock_set_rate/enable " mode to 0666, err = 2
[    5.559410] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/power/cpu_frequency_limits/enable " mode to 0666, err = 2
[    5.559455] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/power/gpu_frequency/enable " mode to 0666, err = 2
[    5.559498] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/sched/sched_switch/enable " mode to 0666, err = 2
[    5.559546] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/sched/sched_wakeup/enable " mode to 0666, err = 2
[    5.559592] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/sched/sched_blocked_reason/enable " mode to 0666, err = 2
[    5.559638] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/sched/sched_cpu_hotplug/enable " mode to 0666, err = 2
[    5.559683] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/sched/sched_pi_setprio/enable " mode to 0666, err = 2
[    5.559730] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/sched/sched_process_exit/enable " mode to 0666, err = 2
[    5.559775] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/sched/sched_waking/enable " mode to 0666, err = 2
[    5.559820] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/signal/signal_generate/enable " mode to 0666, err = 2
[    5.559864] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/signal/signal_deliver/enable " mode to 0666, err = 2
[    5.559908] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/sync/enable " mode to 0666, err = 2
[    5.559945] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/task/task_rename/enable " mode to 0666, err = 2
[    5.559989] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/task/task_newtask/enable " mode to 0666, err = 2
[    5.560035] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/vmscan/mm_vmscan_direct_reclaim_begin/enable " mode to 0666, err = 2
[    5.560109] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/vmscan/mm_vmscan_direct_reclaim_end/enable " mode to 0666, err = 2
[    5.560156] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/vmscan/mm_vmscan_kswapd_wake/enable " mode to 0666, err = 2
[    5.560195] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/vmscan/mm_vmscan_kswapd_sleep/enable " mode to 0666, err = 2
[    5.560240] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/block/block_rq_issue/enable " mode to 0666, err = 2
[    5.560285] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/block/block_rq_complete/enable " mode to 0666, err = 2
[    5.560334] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/ext4/ext4_da_write_begin/enable " mode to 0666, err = 2
[    5.560379] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/ext4/ext4_da_write_end/enable " mode to 0666, err = 2
[    5.560417] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/ext4/ext4_es_lookup_extent_enter/enable " mode to 0666, err = 2
[    5.560462] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/ext4/ext4_es_lookup_extent_exit/enable " mode to 0666, err = 2
[    5.560506] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/ext4/ext4_load_inode/enable " mode to 0666, err = 2
[    5.560551] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/ext4/ext4_sync_file_enter/enable " mode to 0666, err = 2
[    5.560595] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/ext4/ext4_sync_file_exit/enable " mode to 0666, err = 2
[    5.560640] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/f2fs/f2fs_get_data_block/enable " mode to 0666, err = 2
[    5.560678] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/f2fs/f2fs_iget/enable " mode to 0666, err = 2
[    5.560722] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/f2fs/f2fs_sync_file_enter/enable " mode to 0666, err = 2
[    5.560768] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/f2fs/f2fs_sync_file_exit/enable " mode to 0666, err = 2
[    5.560813] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/f2fs/f2fs_write_begin/enable " mode to 0666, err = 2
[    5.560859] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/f2fs/f2fs_write_end/enable " mode to 0666, err = 2
[    5.560900] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/filemap/mm_filemap_add_to_page_cache/enable " mode to 0666, err = 2
[    5.560946] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/events/filemap/mm_filemap_delete_from_page_cache/enable " mode to 0666, err = 2
[    5.560990] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/options/overwrite " mode to 0666, err = 2
[    5.561033] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/options/print-tgid " mode to 0666, err = 2
[    5.561080] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/options/record-tgid " mode to 0666, err = 2
[    5.561125] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu0/trace " mode to 0666, err = 2
[    5.561162] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu1/trace " mode to 0666, err = 2
[    5.561206] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu2/trace " mode to 0666, err = 2
[    5.561249] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu3/trace " mode to 0666, err = 2
[    5.561293] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu4/trace " mode to 0666, err = 2
[    5.561336] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu5/trace " mode to 0666, err = 2
[    5.561379] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu6/trace " mode to 0666, err = 2
[    5.561422] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu7/trace " mode to 0666, err = 2
[    5.561465] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu8/trace " mode to 0666, err = 2
[    5.561508] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu9/trace " mode to 0666, err = 2
[    5.561551] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu10/trace " mode to 0666, err = 2
[    5.561594] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu11/trace " mode to 0666, err = 2
[    5.561630] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu12/trace " mode to 0666, err = 2
[    5.561673] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu13/trace " mode to 0666, err = 2
[    5.561716] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu14/trace " mode to 0666, err = 2
[    5.561760] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/kernel/tracing/per_cpu/cpu15/trace " mode to 0666, err = 2
[    5.561900] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger early-fs
[    5.561934] [pid=1][INIT][ERROR] [init_service_manager.c:594)] Cannot find service vold.
[    5.561967] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger fs
[    5.562913] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi_securec.ko
[    5.562964] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi_osal.ko
[    5.563003] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi_irq.ko
[    5.563039] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi_proc.ko
[    5.563070] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/sys_config.ko
[    5.563107] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi3516cv500_base.ko
[    5.563144] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi3516cv500_sys.ko
[    5.563179] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi3516cv500_tde.ko
[    5.563214] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi3516cv500_vo_dev.ko
[    5.563251] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hifb.ko
[    5.563287] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi3516cv500_hdmi.ko
[    5.563315] [pid=1][INIT][ERROR] [init_cmds.c:116)] Can not get real file name from param /vendor/modules/hi_mipi_rx.ko
[    5.563339] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger post-fs
[    5.563829] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/fs/selinux/policy " mode to 0444, err = 2
[    5.564166] [pid=1][INIT][INFO] [init_common_service.c:226)] service udevd_service starting pid 343
[    5.564294] [pid=1][INIT][INFO] [init_common_cmds.c:175)] Sleeping 1 second(s)
[    5.695565] udevd[343]: starting eudev-3.2.9
[    5.953777] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[    6.565257] [pid=1][INIT][INFO] [init_common_service.c:226)] service mmi_uinput_service starting pid 349
[    6.565548] [pid=1][INIT][INFO] [init_common_cmds.c:175)] Sleeping 2 second(s)
[    6.792935] phy phy-fe8a0000.usb2-phy.1: charger = USB_SDP_CHARGER
[    6.967124] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[    7.980373] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[    8.566886] [pid=1][INIT][INFO] [init_common_service.c:226)] service hdi_weston starting pid 352
[    8.567183] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger weston_start
[    8.567289] [pid=1][INIT][INFO] [init_common_cmds.c:175)] Sleeping 2 second(s)
[    8.681629] PARAM_WATCHER[pid=352][INIT][INFO] [watcher_manager_kits.cpp:130)] AddWatcher keyPrefix debug.bytrace.tags.enableflags
[    8.993587] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[    9.798371] PARAM_WATCHER[pid=352][INIT][ERROR] [watcher_manager_kits.cpp:66)] Get watcher manager object from samgr failed
[    9.798493] PARAM_WATCHER[pid=352][INIT][ERROR] [watcher_manager_kits.cpp:138)] Failed to get watcher manager
[    9.909823] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger late-fs
[    9.909837] [pid=361][INIT][ERROR] [init_cmds.c:178)] DoExec: execute "/system/bin/udevadm" failed: 2.
[    9.910241] [pid=1][INIT][INFO] [init_common_service.c:226)] service appspawn starting pid 363
[    9.910250] [pid=362][INIT][ERROR] [init_cmds.c:178)] DoExec: execute "/system/bin/udevadm" failed: 2.
[    9.910675] [pid=1][INIT][INFO] [init_common_service.c:226)] service installs starting pid 364
[    9.911048] [pid=1][INIT][INFO] [init_common_service.c:226)] service lmks starting pid 365
[    9.911421] [pid=1][INIT][INFO] [init_common_service.c:226)] service dps_service starting pid 366
[    9.911547] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger post-fs-data
[    9.911908] [pid=1][INIT][INFO] [init_common_service.c:226)] service misc starting pid 367
[    9.912594] [pid=1][INIT][ERROR] [init_common_cmds.c:221)] Failed to get real path /data/system/entropy.dat
[    9.916230] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /data/misc/bluedroid/bt_config.conf " mode to 0660, err = 2
[    9.916383] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /data/misc/bluedroid/bt_config.conf, err 2.
[    9.920363] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /data/misc/wifi/wpa_supplicant.conf " mode to 0660, err = 2
[    9.936671] [pid=1][INIT][ERROR] [init_common_cmds.c:270)] SetOwner invalid uid :mediadrm.
[    9.936844] [pid=1][INIT][ERROR] [init_common_cmds.c:316)] Failed to change owner /data/mediadrm, err 17.
[    9.947304] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/fscklogs/log, err 2.
[    9.947422] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/fscklogs/log " mode to 0770, err = 2
[    9.947802] [pid=1][INIT][INFO] [init_common_service.c:226)] service wifi_hal_service starting pid 368
[    9.948152] [pid=1][INIT][INFO] [init_common_service.c:226)] service accountmgr starting pid 369
[    9.948494] [pid=1][INIT][INFO] [init_common_service.c:226)] service distributedsched starting pid 370
[    9.948877] [pid=1][INIT][INFO] [init_common_service.c:226)] service softbus_server starting pid 371
[    9.951953] [pid=1][INIT][INFO] [init_common_service.c:226)] service pulseaudio starting pid 376
[    9.952319] PARAM[pid=1][INIT][INFO] [trigger_processor.c:71)] DoTriggerExec trigger audio_policy_start
[    9.952500] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/dev_mgr, err 2.
[    9.952698] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_disp, err 2.
[    9.952864] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_input_host, err 2.
[    9.952977] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_input_event1, err 2.
[    9.953126] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_input_event2, err 2.
[    9.953232] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_input_event3, err 2.
[    9.953371] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_input_event4, err 2.
[    9.953498] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_input_event5, err 2.
[    9.953635] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_input_event6, err 2.
[    9.953733] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_sensor_manager_ap, err 2.
[    9.953874] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_misc_vibrator, err 2.
[    9.953974] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_audio_render, err 2.
[    9.954111] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_audio_capture, err 2.
[    9.954207] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_audio_control, err 2.
[    9.954343] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_audio_codec_dev0, err 2.
[    9.954440] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_audio_smartpa_dev0, err 2.
[    9.954584] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/hdf_dsoftbus, err 2.
[    9.954959] [pid=1][INIT][INFO] [init_common_service.c:226)] service deviceauth_service starting pid 378
[    9.956783] [pid=369][INIT][ERROR] [init_common_service.c:165)] Failed to open /dev/cpuset/foreground/tasks.
[    9.957277] [pid=369][INIT][ERROR] [init_common_service.c:165)] Failed to open /dev/stune/foreground/tasks.
[    9.957390] [pid=369][INIT][ERROR] [init_common_service.c:165)] Failed to open /dev/blkio/foreground/tasks.
[    9.958919] [pid=1][INIT][INFO] [init_common_service.c:226)] service hilogd starting pid 379
[    9.960021] [pid=1][INIT][INFO] [init_common_service.c:226)] service huks_service starting pid 380
[    9.965043] [pid=1][INIT][INFO] [init_common_service.c:226)] service faultloggerd starting pid 383
[    9.965557] [pid=1][INIT][INFO] [init_common_service.c:226)] service wifi_manager_service starting pid 384
[    9.966763] [pid=1][INIT][INFO] [init_common_service.c:226)] service hiview starting pid 385
[    9.970964] [pid=383][INIT][ERROR] [init_common_service.c:165)] Failed to open /dev/cpuset/system-background/tasks.
[    9.973723] [pid=379][INIT][INFO] [init_service_socket.c:91)] CreateSocket hilogInput success
[    9.973860] [pid=379][INIT][INFO] [init_service_socket.c:91)] CreateSocket hilogControl success
[    9.974031] [pid=379][INIT][INFO] [init_service_file.c:42)] File path =/dev/kmsg . file flags =0, file perm =416
[    9.974108] [pid=379][INIT][ERROR] [init_service_file.c:67)] Set file env pubName =OHOS_FILE__dev_kmsg, val =14.
[    9.974630] [pid=1][INIT][INFO] [init_common_service.c:226)] service hdf_devmgr starting pid 386
[    9.974842] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger load_persist_props_action
[    9.975237] PARAM[pid=1][INIT][INFO] [param_persistadp.c:38)] LoadPersistParam open file /data/parameters/persist_parameters
[    9.977734] [pid=385][INIT][INFO] [init_service_socket.c:91)] CreateSocket hisysevent success
[    9.978262] [pid=385][INIT][ERROR] [init_common_service.c:165)] Failed to open /dev/cpuset/system-background/tasks.
[    9.980706] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger boot
[    9.981047] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/module/lowmemorykiller/parameters/adj, err 2.
[    9.981098] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/module/lowmemorykiller/parameters/adj " mode to 0664, err = 2
[    9.981179] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/module/lowmemorykiller/parameters/minfree, err 2.
[    9.981213] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/module/lowmemorykiller/parameters/minfree " mode to 0664, err = 2
[    9.981415] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/block/zram0/writeback, err 2.
[    9.981459] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/block/zram0/writeback " mode to 0664, err = 2
[    9.981620] [pid=1][INIT][ERROR] [init_cmds.c:73)] Failed to get param dev.mnt.blk.data
[    9.981633] [pid=1][INIT][ERROR] [init_common_cmds.c:53)] Failed to get value for /sys/fs/f2fs/${dev.mnt.blk.data}/cp_interval 200
[    9.981645] [pid=1][INIT][ERROR] [init_common_cmds.c:135)] Invalid arguments cmd: write  content: /sys/fs/f2fs/${dev.mnt.blk.data}/cp_interval 200
[    9.981728] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/power/autosleep, err 2.
[    9.981823] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/power/wake_lock, err 2.
[    9.981907] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/power/wake_unlock, err 2.
[    9.981936] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/power/wake_lock " mode to 0660, err = 2
[    9.981966] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/power/wake_unlock " mode to 0660, err = 2
[    9.982059] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/timer_rate, err 2.
[    9.982090] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/timer_rate " mode to 0660, err = 2
[    9.982177] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/timer_slack, err 2.
[    9.982208] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/timer_slack " mode to 0660, err = 2
[    9.982294] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/min_sample_time, err 2.
[    9.982326] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/min_sample_time " mode to 0660, err = 2
[    9.982414] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq, err 2.
[    9.982447] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq " mode to 0660, err = 2
[    9.982534] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/target_loads, err 2.
[    9.982564] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/target_loads " mode to 0660, err = 2
[    9.982648] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load, err 2.
[    9.982685] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load " mode to 0660, err = 2
[    9.982770] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay, err 2.
[    9.982800] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay " mode to 0660, err = 2
[    9.982884] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/boost, err 2.
[    9.982914] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/boost " mode to 0660, err = 2
[    9.982997] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/boostpulse, err 2.
[    9.983076] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/input_boost, err 2.
[    9.983107] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/input_boost " mode to 0660, err = 2
[    9.983186] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/boostpulse_duration, err 2.
[    9.983223] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/boostpulse_duration " mode to 0660, err = 2
[    9.983300] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/devices/system/cpu/cpufreq/interactive/io_is_busy, err 2.
[    9.983329] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /sys/devices/system/cpu/cpufreq/interactive/io_is_busy " mode to 0660, err = 2
[    9.990368] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/vibrator/trigger, err 2.
[    9.990476] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/vibrator/activate, err 2.
[    9.990554] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/vibrator/brightness, err 2.
[    9.990640] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/vibrator/duration, err 2.
[    9.990718] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/vibrator/state, err 2.
[    9.990797] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/timed_output/vibrator/enable, err 2.
[    9.990876] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/keyboard-backlight/brightness, err 2.
[    9.990961] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/lcd-backlight/brightness, err 2.
[    9.991039] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/button-backlight/brightness, err 2.
[    9.991116] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/jogball-backlight/brightness, err 2.
[    9.991924] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/red/brightness, err 2.
[    9.992367] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/green/brightness, err 2.
[    9.992593] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/blue/brightness, err 2.
[    9.992826] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/red/device/grpfreq, err 2.
[    9.992919] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/red/device/grppwm, err 2.
[    9.993314] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/class/leds/red/device/blink, err 2.
[    9.993732] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/module/sco/parameters/disable_esco, err 2.
[    9.993857] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/kernel/ipv4/tcp_wmem_min, err 2.
[    9.994253] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/kernel/ipv4/tcp_wmem_def, err 2.
[    9.994352] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/kernel/ipv4/tcp_wmem_max, err 2.
[    9.994481] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/kernel/ipv4/tcp_rmem_min, err 2.
[    9.994745] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/kernel/ipv4/tcp_rmem_def, err 2.
[    9.994986] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/kernel/ipv4/tcp_rmem_max, err 2.
[    9.995989] [pid=1][INIT][INFO] [init_common_service.c:226)] service ispserver starting pid 387
[    9.997216] [pid=1][INIT][ERROR] [init_common_cmds.c:409)] Failed to mount for /config, err 16.
[   10.000673] file system registered
[   10.002975] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/ttyAMA2 " mode to 0777, err = 2
[   10.003101] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/rtkbt_dev " mode to 0777, err = 2
[   10.003500] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/xt_qtaguid " mode to 0640, err = 2
[   10.003721] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /proc/net/xt_qtaguid/ctrl " mode to 0660, err = 2
[   10.003775] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /proc/net/xt_qtaguid/stats " mode to 0440, err = 2
[   10.004563] [pid=1][INIT][ERROR] [init_common_cmds.c:331)] Failed to change mode " /dev/ion " mode to 0666, err = 2
[   10.005285] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /dev/ion, err 2.
[   10.006598] [pid=1][INIT][INFO] [init_common_service.c:226)] service sensors starting pid 388
[   10.007049] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[   10.007312] [pid=1][INIT][INFO] [init_common_service.c:226)] service netmanager starting pid 390
[   10.007654] [pid=1][INIT][INFO] [init_common_service.c:226)] service time_service starting pid 391
[   10.007967] [pid=1][INIT][INFO] [init_common_service.c:226)] service updater_sa starting pid 392
[   10.008218] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/power/wake_lock, err 2.
[   10.008346] [pid=1][INIT][ERROR] [init_common_cmds.c:282)] Failed to change owner for /sys/power/wake_unlock, err 2.
[   10.008624] [pid=1][INIT][INFO] [init_common_service.c:226)] service foundation starting pid 393
[   10.009044] [pid=1][INIT][ERROR] [init_service_manager.c:594)] Cannot find service netd.
[   10.016795] [pid=1][INIT][INFO] [init_common_service.c:226)] service camera_service starting pid 398
[   10.017286] [pid=1][INIT][INFO] [init_common_service.c:226)] service param_watcher starting pid 399
[   10.017714] [pid=1][INIT][INFO] [init_common_service.c:226)] service distributeddata starting pid 400
[   10.018104] [pid=1][INIT][INFO] [init_common_service.c:226)] service media_service starting pid 401
[   10.018540] [pid=1][INIT][INFO] [init_common_service.c:226)] service medialibrary_service starting pid 402
[   10.026218] [pid=1][INIT][INFO] [init_common_service.c:226)] service telephony_sa starting pid 404
[   10.026684] [pid=1][INIT][INFO] [init_common_service.c:226)] service inputmethod_service starting pid 405
[   10.027347] [pid=1][INIT][INFO] [init_common_service.c:226)] service console starting pid 406
[   10.027560] PARAM[pid=1][INIT][INFO] [trigger_processor.c:120)] Add trigger param:sys.usb.config=hdc && param:sys.usb.configfs=1 to execute queue
[   10.027705] PARAM[pid=1][INIT][INFO] [trigger_processor.c:116)] DoTiggerExecute trigger param:sys.usb.config=hdc && param:sys.usb.configfs=1 has been waiting execute
[   10.027800] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger weston_start
[   10.028216] [pid=1][INIT][INFO] [init_common_service.c:226)] service bootanimation starting pid 407
[   10.028313] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger audio_policy_start
[   10.028562] [pid=1][INIT][INFO] [init_common_service.c:226)] service audio_policy starting pid 408
[   10.028699] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger param:sys.usb.config=hdc && param:sys.usb.configfs=1
[   10.041923] [pid=400][INIT][ERROR] [init_common_service.c:165)] Failed to open /dev/cpuset/foreground/tasks.
[   10.041997] [pid=400][INIT][ERROR] [init_common_service.c:165)] Failed to open /dev/stune/foreground/tasks.
[   10.042047] [pid=400][INIT][ERROR] [init_common_service.c:165)] Failed to open /dev/blkio/foreground/tasks.
[   10.052040] [pid=1][INIT][INFO] [init_common_service.c:226)] service hdcd starting pid 409
[   10.052702] [pid=1][INIT][ERROR] [init_signal_handler.c:39)] Child process 352 exit with signal: 11
[   10.052740] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 352.
[   10.052778] [pid=1][INIT][INFO] [init_common_service.c:285)] Reap service hdi_weston, pid 352.
[   10.053166] [pid=1][INIT][INFO] [init_common_service.c:226)] service hdi_weston starting pid 410
[   10.053323] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 361 exit with code : 127
[   10.053386] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 361.
[   10.053510] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 362 exit with code : 127
[   10.053538] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 362.
[   10.053619] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 367 exit with code : 0
[   10.053644] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 367.
[   10.053667] [pid=1][INIT][INFO] [init_common_service.c:285)] Reap service misc, pid 367.
[   10.074848] [pid=409][INIT][INFO] [init_service_socket.c:91)] CreateSocket hdcd success
[   10.473741] [pid=385][INIT][INFO] [init_socket.c:53)] GetControlSocket path is OHOS_SOCKET_hisysevent
[   10.473841] [pid=385][INIT][INFO] [init_socket.c:36)] GetControlFromEnv path is OHOS_SOCKET_hisysevent
[   10.473874] [pid=385][INIT][INFO] [init_socket.c:42)] GetControlFromEnv fd is 12
[   10.473908] [pid=385][INIT][INFO] [init_socket.c:63)] sockDir /dev/unix/socket/hisysevent
[   10.473933] [pid=385][INIT][INFO] [init_socket.c:64)] addr.sun_path /dev/unix/socket/hisysevent
# [   10.707817] [pid=1][INIT][ERROR] [init_signal_handler.c:39)] Child process 387 exit with signal: 11
[   10.707853] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 387.
[   10.707866] [pid=1][INIT][INFO] [init_common_service.c:285)] Reap service ispserver, pid 387.
[   10.716001] read descriptors
[   10.716034] read strings
[   10.716629] PARAM[pid=1][INIT][INFO] [trigger_processor.c:120)] Add trigger param:sys.usb.ffs.ready=1 && param:sys.usb.config=hdc && param:sys.usb.configfs=1 to execute queue
[   10.716702] PARAM[pid=1][INIT][INFO] [trigger_processor.c:102)] ExecuteTrigger trigger param:sys.usb.ffs.ready=1 && param:sys.usb.config=hdc && param:sys.usb.configfs=1
[   10.882877] PARAM_WATCHER[pid=410][INIT][INFO] [watcher_manager_kits.cpp:130)] AddWatcher keyPrefix debug.bytrace.tags.enableflags
[   10.926799] dwc3 fcc00000.dwc3: device reset
[   11.029422] android_work: sent uevent USB_STATE=CONNECTED
[   11.033447] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
[   11.111891] configfs-gadget gadget: high-speed config #1: b
[   11.112075] android_work: sent uevent USB_STATE=CONFIGURED
[   11.200030] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.200327] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.200460] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.200561] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.202909] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.203057] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.203197] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.203296] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.250553] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.250784] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.250908] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.251003] rockchip-csi2-dphy2: No link between dphy and sensor
[   11.534209] [dm=0D002800][pid=410][mmi_server.cpp:45][klog][info] ChkDefs:
[   11.534323] [dm=0D002800][pid=410][mmi_server.cpp:45][klog][info] OHOS_BUILD                             
[   11.534368] [dm=0D002800][pid=410][mmi_server.cpp:45][klog][info] OHOS_WESTEN_MODEL                     
[   11.534408] [dm=0D002800][pid=410][mmi_server.cpp:45][klog][info] OHOS_AUTO_TEST_FRAME                  
[   11.535189] [dm=0D002800][pid=410][mmi_server.cpp:45][klog][info] OHOS_BUILD_LIBINPUT                    
[   11.535251] [dm=0D002800][pid=410][mmi_server.cpp:45][klog][info] OHOS_BUILD_AI                          
[   11.535324] [dm=0D002800][pid=410][mmi_server.cpp:45][klog][info] DEBUG_CODE_TEST                        
[   11.537376] [dm=0D002800][pid=410][multimodal_input_connect_service.cpp:86][klog][info] Congratulations, MultimodalInputConnectService start successfully!
[   11.544437] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 407 exit with code : 255
[   11.544469] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 407.
[   11.544488] [pid=1][INIT][INFO] [init_common_service.c:285)] Reap service bootanimation, pid 407.
[   11.551598] Freeing drm_logo memory: 1236K
[   12.060151] rk-pcie 3c0800000.pcie: PCIe Link Fail
[   12.060183] rk-pcie 3c0800000.pcie: failed to initialize host
[   13.981558] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 377 exit with code : 0
[   13.981619] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 377.
[   14.067400] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 389 exit with code : 0
[   14.067479] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 389.
[   14.082508] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 394 exit with code : 0
[   14.082537] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 394.
[   14.087296] [pid=1][INIT][ERROR] [init_signal_handler.c:42)] Child process 403 exit with code : 0
[   14.087323] [pid=1][INIT][INFO] [init_signal_handler.c:44)] SigHandler, SIGCHLD received, sigPID = 403.
[   24.257939] binder_alloc: 816: binder_alloc_buf, no vma
[   24.257966] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.258035] binder_alloc: 816: binder_alloc_buf, no vma
[   24.258049] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.258221] binder_alloc: 816: binder_alloc_buf, no vma
[   24.258230] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.258452] binder_alloc: 816: binder_alloc_buf, no vma
[   24.258466] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.258576] binder_alloc: 816: binder_alloc_buf, no vma
[   24.258591] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.258894] binder_alloc: 816: binder_alloc_buf, no vma
[   24.258908] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.259025] binder_alloc: 816: binder_alloc_buf, no vma
[   24.259039] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.259096] binder_alloc: 816: binder_alloc_buf, no vma
[   24.259110] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.259166] binder_alloc: 816: binder_alloc_buf, no vma
[   24.259180] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   24.259232] binder_alloc: 816: binder_alloc_buf, no vma
[   24.259245] binder: 410:596 transaction failed 29189/-3, size 52-0 line 3232
[   33.766966] vcc5v0_otg: disabling
[   33.767048] vcc3v3_lcd0_n: disabling
[   33.767078] vcc3v3_lcd1_n: disabling
[   33.767115] pcie30_3v3: disabling
[   33.767192] vcc_camera: disabling


# cat /etc/udev/rules.d/touchscreen.rules                                       cat /proc/bus/input/devices

I: Bus=0019 Vendor=524b Product=0006 Version=0100
N: Name="fe6e0030.pwm"
P: Phys=gpio-keys/remotectl
S: Sysfs=/devices/platform/fe6e0030.pwm/input/input0
U: Uniq=
H: Handlers=kbd event0 cpufreq
B: PROP=0
B: EV=3
B: KEY=100 0 0 40408800 1c16c0 0 0 0

I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="rk805 pwrkey"
P: Phys=rk805_pwrkey/input0
S: Sysfs=/devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1
U: Uniq=
H: Handlers=kbd event1 cpufreq
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="himax-touchscreen"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=kbd event2 cpufreq
B: PROP=2
B: EV=b
B: KEY=10 0 0 0 0 0 0 0 400 0 0 0 2000000 0 40000800 40 0 0 0
B: ABS=6658000 0

I: Bus=0019 Vendor=0001 Product=0001 Version=0100
N: Name="adc-keys"
P: Phys=adc-keys/input0
S: Sysfs=/devices/platform/adc-keys/input/input3
U: Uniq=
H: Handlers=kbd event3 cpufreq
B: PROP=0
B: EV=3
B: KEY=40000800 40000 1000000 0 0

# cat /etc/udev/rules.d/touchscreen.rules

ATTRS{name}=="VSoC touchscreen", ENV{ID_INPUT}="1", ENV{ID_INPUT_TOUCHSCREEN}="1"
ATTRS{name}=="VSoC keyboard", ENV{ID_INPUT}="1", ENV{ID_INPUT_KEYBOARD}="1"
DRIVERS=="hid-multitouch", ENV{ID_INPUT}="1", ENV{ID_INPUT_TOUCHSCREEN}="1"
ATTR{name}=="himax-touchscreen", ENV{ID_INPUT}="1", ENV{ID_INPUT_TOUCHSCREEN}="1"
#

回复

使用道具 举报

75

积分

0

威望

0

贡献

技术小白

积分
75
发表于 2022-4-3 16:15:16     
本帖最后由 BXKJ 于 2022-4-3 16:17 编辑

插上鼠标,一直打印这个信息 image.png
回复

使用道具 举报

424

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
424
发表于 2022-4-6 16:04:36     

这款触摸屏还在适配中。。。
回复

使用道具 举报

75

积分

0

威望

0

贡献

技术小白

积分
75
发表于 2022-4-6 19:51:52     
Firefly_Javier 发表于 2022-4-6 16:04
这款触摸屏还在适配中。。。

好的,多谢,有结果了记得公布噢
回复

使用道具 举报

49

积分

0

威望

0

贡献

技术小白

积分
49
发表于 2022-4-7 18:02:17     
ROC-RK3568-PC这个板子移植OpenHarmony        3.1 Beta后,harmony桌面可以正常启动,但是插上usb鼠标后无法使用,能做个适配教程吗
回复

使用道具 举报

返回列表
12345
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表