Firefly开源社区

声卡问题???

286

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
286
发表于 2017-3-28 18:13:15     
RK3288烧的Firefly-rk3288_Ubuntu_1604_2016_10181203_Beta.7z.
alsamixer显示This sound device does not have any controls.
用aplay播放自己在别的地方捕获的原始音频数据有声音但声音极小,用其它播放器或网上播放音视频都完全没声音,调节音量都没用;后面装了pulseaudio后连用aplay播放都完全没声音了。
什么问题呀?求解答,先谢。
回复

使用道具 举报

286

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
286
发表于 2017-3-28 18:15:53     
firefly@localhost:~$ dmesg
[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.16 (zouxf@mid-server) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #102 SMP Mon Oct 17 11:19:36 CST 2016
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Firefly-RK3288
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 524288
[    0.000000] free_area_init_node: node 0, pgdat c0f8c6c0, node_mem_map eeffa000
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 327680 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 13 pages/cpu @eef90000 s24064 r8192 d20992 u53248
[    0.000000] pcpu-alloc: s24064 r8192 d20992 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522752
[    0.000000] Kernel command line: earlyprintk=ttyS2,115200 console=tty0 console=ttyS2,115200 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 root=/dev/block/mtd/by-name/linuxroot linuxroot rw rootfstype=ext4 init=/sbin/init  mtdparts=rk29xxnand:0x00010000@0x00002000(boot),0x00002000@0x00012000(backup),-@0x00014000(linuxroot) storagemedia=emmc loader.timestamp=2015-01-21_16:36:44
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 2061352K/2097152K available (9964K kernel code, 592K rwdata, 3328K rodata, 1024K init, 525K bss, 35800K reserved, 0K cma-reserved, 1310720K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0dfb174   (14285 kB)
                     .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
                     .data : 0xc0f00000 - 0xc0f943c0   ( 593 kB)
                      .bss : 0xc0f96000 - 0xc1019624   ( 526 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]         Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C: failed to init: -19
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000025] Switching to timer-based delay loop, resolution 41ns
[    0.002222] Console: colour dummy device 80x30
[    0.003393] console [tty0] enabled
[    0.003448] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.003523] pid_max: default: 32768 minimum: 301
[    0.003663] Security Framework initialized
[    0.003703] Yama: becoming mindful.
[    0.003800] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003848] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004804] Initializing cgroup subsys devices
[    0.004857] Initializing cgroup subsys freezer
[    0.004917] CPU: Testing write buffer coherency: ok
[    0.004988] ftrace: allocating 32784 entries in 97 pages
[    0.083763] CPU0: update cpu_capacity 430
[    0.083809] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.084165] Setting up static identity map for 0x100000 - 0x100058
[    0.087457] CPU1: update cpu_capacity 430
[    0.087464] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.089407] CPU2: update cpu_capacity 430
[    0.089415] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.091331] CPU3: update cpu_capacity 430
[    0.091338] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.091429] Brought up 4 CPUs
[    0.091578] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.091604] CPU: All CPU(s) started in SVC mode.
[    0.093176] devtmpfs: initialized
[    0.107350] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.107791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.108254] pinctrl core: initialized pinctrl subsystem
[    0.109427] NET: Registered protocol family 16
[    0.110313] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.133485] cpuidle: using governor ladder
[    0.163512] cpuidle: using governor menu
[    0.178736] gpiochip_add: registered GPIOs 0 to 23 on device: gpio0
[    0.178869] gpiochip_add: registered GPIOs 24 to 55 on device: gpio1
[    0.178995] gpiochip_add: registered GPIOs 56 to 87 on device: gpio2
[    0.179113] gpiochip_add: registered GPIOs 88 to 119 on device: gpio3
[    0.179238] gpiochip_add: registered GPIOs 120 to 151 on device: gpio4
[    0.179356] gpiochip_add: registered GPIOs 152 to 183 on device: gpio5
[    0.179474] gpiochip_add: registered GPIOs 184 to 215 on device: gpio6
[    0.179602] gpiochip_add: registered GPIOs 216 to 247 on device: gpio7
[    0.179722] gpiochip_add: registered GPIOs 248 to 263 on device: gpio8
[    0.189371] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.189422] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.224973] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dovdd-1v8-regulator[0]'
[    0.225296] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vsys-regulator[0]'
[    0.225715] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
[    0.226069] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/flash-regulator[0]'
[    0.226340] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/usb-regulator[0]'
[    0.226730] of_get_named_gpiod_flags: parsed 'gpio' property of node '/usb-host-regulator[0]' - status (0)
[    0.227119] of_get_named_gpiod_flags: parsed 'gpio' property of node '/usb-otg-regulator[0]' - status (0)
[    0.227520] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc28-dvp-regulator[0]' - status (0)
[    0.227966] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vga-regulator[0]' - status (0)
[    0.228654] iommu: Adding device ff930000.vop to group 0
[    0.228771] iommu: Adding device ff940000.vop to group 1
[    0.228887] iommu: Adding device ff9a0000.video-codec to group 2
[    0.230148] SCSI subsystem initialized
[    0.230466] usbcore: registered new interface driver usbfs
[    0.230562] usbcore: registered new interface driver hub
[    0.230649] usbcore: registered new device driver usb
[    0.230833] Linux video capture interface: v2.00
[    0.230902] pps_core: LinuxPPS API ver. 1 registered
[    0.230929] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.230990] PTP clock support registered
[    0.231571] Advanced Linux Sound Architecture Driver Initialized.
[    0.232423] Bluetooth: Core ver 2.21
[    0.232485] NET: Registered protocol family 31
[    0.232511] Bluetooth: HCI device and connection manager initialized
[    0.232546] Bluetooth: HCI socket layer initialized
[    0.232579] Bluetooth: L2CAP socket layer initialized
[    0.232638] Bluetooth: SCO socket layer initialized
[    0.234111] clocksource: Switched to clocksource arch_sys_counter
[    0.287956] NET: Registered protocol family 2
[    0.288747] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.288873] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    0.289380] TCP: Hash tables configured (established 8192 bind 8192)
[    0.289490] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    0.289568] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    0.289912] NET: Registered protocol family 1
[    0.290252] Trying to unpack rootfs image as initramfs...
[    0.489607] Freeing initrd memory: 2660K (c4bf0000 - c4e89000)
[    0.490586] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
[    0.492507] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.493253] Initialise system trusted keyring
[    0.504993] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.506701] fuse init (API version 7.23)
[    0.512793] NET: Registered protocol family 38
[    0.512849] Key type asymmetric registered
[    0.512880] Asymmetric key parser 'x509' registered
[    0.512993] bounce: pool size: 64 pages
[    0.513267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.513319] io scheduler noop registered
[    0.513349] io scheduler deadline registered
[    0.513557] io scheduler cfq registered (default)
[    0.513996] rockchip-usb-phy phy: GPIO lookup for consumer vbus_drv
[    0.514011] rockchip-usb-phy phy: using device tree for GPIO lookup
[    0.514026] of_get_named_gpiod_flags: can't parse 'vbus_drv-gpios' property of node '/phy[0]'
[    0.514039] of_get_named_gpiod_flags: can't parse 'vbus_drv-gpio' property of node '/phy[0]'
[    0.514051] rockchip-usb-phy phy: using lookup tables for GPIO lookup
[    0.514064] rockchip-usb-phy phy: lookup for GPIO vbus_drv failed
[    0.514076] rockchip-usb-phy phy: vbus_drv is not assigned!
[    0.518781] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.518834] dma-pl330 ff250000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.519823] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.519873] dma-pl330 ffb20000.dma-controller:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    0.520597] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.522701] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[    0.523625] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 38, base_baud = 1500000) is a 16550A
[    0.524584] console [ttyS2] disabled
[    0.524658] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 39, base_baud = 1500000) is a 16550A
[    1.256098] console [ttyS2] enabled
[    1.260504] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 40, base_baud = 1500000) is a 16550A
[    1.271006] [drm] Initialized drm 1.1.0 20060810
[    1.277109] rockchip-lvds ff96c000.lvds: Failed to get supply 'avdd1v0': -517
[    1.284372] platform ff96c000.lvds: Driver rockchip-lvds requests probe deferral
[    1.293105] usbcore: registered new interface driver udl
[    1.300333] vga-encoder vga-encoder: GPIO lookup for consumer psave
[    1.300349] vga-encoder vga-encoder: using device tree for GPIO lookup
[    1.300382] of_get_named_gpiod_flags: parsed 'psave-gpios' property of node '/vga-encoder[0]' - status (0)
[    1.300501] platform vga-encoder: Driver vga-encoder requests probe deferral
[    1.308169] platform vga-connector: Driver vga-connector requests probe deferral
[    1.315967] platform ffa30000.gpu: Driver mali requests probe deferral
[    1.323962] brd: module loaded
[    1.334727] loop: module loaded
[    1.338764] zram: Added device: zram0
[    1.342481] lkdtm: No crash points registered, enable through debugfs
[    1.350918] tun: Universal TUN/TAP device driver, 1.6
[    1.356029] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.363751] rk_gmac-dwmac ff290000.ethernet: phy regulator is not available yet, deferred probing
[    1.372737] platform ff290000.ethernet: Driver rk_gmac-dwmac requests probe deferral
[    1.381120] PPP generic driver version 2.4.2
[    1.385779] usbcore: registered new interface driver rndis_wlan
[    1.391966] usbcore: registered new interface driver rt2800usb
[    1.398119] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.405635] usbcore: registered new interface driver pegasus
[    1.411369] usbcore: registered new interface driver rtl8150
[    1.417124] usbcore: registered new interface driver r8152
[    1.422693] usbcore: registered new interface driver asix
[    1.428185] usbcore: registered new interface driver ax88179_178a
[    1.434377] usbcore: registered new interface driver cdc_ether
[    1.440281] usbcore: registered new interface driver dm9601
[    1.445965] usbcore: registered new interface driver smsc75xx
[    1.451800] usbcore: registered new interface driver smsc95xx
[    1.457645] usbcore: registered new interface driver net1080
[    1.463377] usbcore: registered new interface driver rndis_host
[    1.469393] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.476945] usbcore: registered new interface driver cdc_ncm
[    1.482676] usbcore: registered new interface driver cdc_mbim
[    1.488871] ff540000.usb supply vusb_d not found, using dummy regulator
[    1.495592] ff540000.usb supply vusb_a not found, using dummy regulator
[    1.662622] dwc2 ff540000.usb: DWC OTG Controller
[    1.667413] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
[    1.674531] dwc2 ff540000.usb: irq 43, io mem 0x00000000
[    1.680146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.686977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.694243] usb usb1: Product: DWC OTG Controller
[    1.698965] usb usb1: Manufacturer: Linux 4.4.16 dwc2_hsotg
[    1.704566] usb usb1: SerialNumber: ff540000.usb
[    1.709952] hub 1-0:1.0: USB hub found
[    1.713760] hub 1-0:1.0: 1 port detected
[    1.718406] ff580000.usb supply vusb_d not found, using dummy regulator
[    1.725149] ff580000.usb supply vusb_a not found, using dummy regulator
[    2.024155] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
[    2.031842] dwc2 ff580000.usb: DWC OTG Controller
[    2.036622] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
[    2.043712] dwc2 ff580000.usb: irq 44, io mem 0x00000000
[    2.049330] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.056162] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.063410] usb usb2: Product: DWC OTG Controller
[    2.068147] usb usb2: Manufacturer: Linux 4.4.16 dwc2_hsotg
[    2.073735] usb usb2: SerialNumber: ff580000.usb
[    2.079139] hub 2-0:1.0: USB hub found
[    2.082947] hub 2-0:1.0: 1 port detected
[    2.088375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.094959] ehci-platform: EHCI generic platform driver
[    2.100571] usbcore: registered new interface driver cdc_acm
[    2.106280] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.114351] usb 1-1: new high-speed USB device number 2 using dwc2
[    2.120703] usbcore: registered new interface driver cdc_wdm
[    2.126534] usbcore: registered new interface driver usb-storage
[    2.132673] usbcore: registered new interface driver usbserial
[    2.138602] usbcore: registered new interface driver usbserial_generic
[    2.145206] usbserial: USB Serial support registered for generic
[    2.151288] usbcore: registered new interface driver cp210x
[    2.156936] usbserial: USB Serial support registered for cp210x
[    2.162945] usbcore: registered new interface driver ftdi_sio
[    2.168767] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.176252] usbcore: registered new interface driver keyspan
[    2.181979] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.190081] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.197483] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.204876] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.212277] usbcore: registered new interface driver option
[    2.217927] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.225086] usbcore: registered new interface driver oti6858
[    2.230800] usbserial: USB Serial support registered for oti6858
[    2.236904] usbcore: registered new interface driver pl2303
[    2.242530] usbserial: USB Serial support registered for pl2303
[    2.248651] usbcore: registered new interface driver qcserial
[    2.254487] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.261537] usbcore: registered new interface driver sierra
[    2.267188] usbserial: USB Serial support registered for Sierra USB modem
[    2.274819] usbcore: registered new interface driver iforce
[    2.280510] usbcore: registered new interface driver xpad
[    2.286157] usbcore: registered new interface driver usbtouchscreen
[    2.292774] i2c /dev entries driver
[    2.297186] rk3x-i2c ff140000.i2c: Initialized RK3xxx I2C bus at f08be000
[    2.304784] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at f08d2000
[    2.312247] rk3x-i2c ff170000.i2c: Initialized RK3xxx I2C bus at f08d4000
[    2.319927] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
[    2.319942] fan53555-regulator 0-0040: using device tree for GPIO lookup
[    2.319958] of_get_named_gpiod_flags: can't parse 'vsel-gpios' property of node '/i2c@ff650000/syr827@40[0]'
[    2.319971] of_get_named_gpiod_flags: can't parse 'vsel-gpio' property of node '/i2c@ff650000/syr827@40[0]'
[    2.319982] fan53555-regulator 0-0040: using lookup tables for GPIO lookup
[    2.319995] fan53555-regulator 0-0040: lookup for GPIO vsel failed
[    2.320371] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    2.327718] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[    2.334476] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.334662] vdd_cpu: No configuration
[    2.335964] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
[    2.335971] fan53555-regulator 0-0041: using device tree for GPIO lookup
[    2.335980] of_get_named_gpiod_flags: can't parse 'vsel-gpios' property of node '/i2c@ff650000/syr828@41[0]'
[    2.335987] of_get_named_gpiod_flags: can't parse 'vsel-gpio' property of node '/i2c@ff650000/syr828@41[0]'
[    2.335994] fan53555-regulator 0-0041: using lookup tables for GPIO lookup
[    2.336001] fan53555-regulator 0-0041: lookup for GPIO vsel failed
[    2.336350] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    2.336713] vdd_gpu: No configuration
[    2.338988] rtc-hym8563 0-0051: no valid clock/calendar values available
[    2.362625] usb 1-1: Product: USB 2.0 Hub [MTT]
[    2.367296] rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    2.367921] hub 1-1:1.0: USB hub found
[    2.368010] hub 1-1:1.0: 4 ports detected
[    2.390563] rk3x-i2c ff650000.i2c: Initialized RK3xxx I2C bus at f08d6000
[    2.398296] rk3x-i2c ff660000.i2c: Initialized RK3xxx I2C bus at f08d8000
[    2.405838] probe device ff9a0000.video-codec
[    2.411296] rockchip-vpu ff9a0000.video-codec: Rockchip VPU encoder registered as /vpu/video0
[    2.420109] rockchip-vpu ff9a0000.video-codec: Rockchip VPU decoder registered as /vpu/video1
[    2.428948] usbcore: registered new interface driver uvcvideo
[    2.434735] USB Video Class driver (1.1.1)
[    2.439659] vcc_io: supplied by vcc_sys
[    2.444176] vcc28_dvp: supplied by vcc_io
[    2.448404] dovdd_1v8: supplied by vcc28_dvp
[    2.452849] vcc_flash: supplied by vcc_io
[    2.457190] vcc_lan: supplied by vcc_sys
[    2.461598] vcc_20: supplied by vcc_sys
[    2.465675] vcc_18: supplied by vcc_20
[    2.470504] vcca_33: supplied by vcc_sys
[    2.475070] vccio_sd: supplied by vcc_sys
[    2.481605] rk_tsadcv2_initialize: Missing rockchip,grf property
[    2.488797] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.497660] Bluetooth: Virtual HCI driver ver 1.5
[    2.502578] Bluetooth: HCI UART driver ver 2.3
[    2.507069] Bluetooth: HCI UART protocol H4 registered
[    2.512222] Bluetooth: HCI UART protocol LL registered
[    2.517389] Bluetooth: HCI UART protocol ATH3K registered
[    2.522906] usbcore: registered new interface driver bfusb
[    2.528530] usbcore: registered new interface driver btusb
[    2.534328] vdd_cpu: supplied by vcc_sys
[    2.541547] cpufreq-dt cpufreq-dt: failed register driver: -17
[    2.547406] cpufreq-dt: probe of cpufreq-dt failed with error -17
[    2.553541] sdhci: Secure Digital Host Controller Interface driver
[    2.559726] sdhci: Copyright(c) Pierre Ossman
[    2.564083] Synopsys Designware Multimedia Card Interface Driver
[    2.570514] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
[    2.577769] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
[    2.584563] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
[    2.590336] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[    2.600139] vcc_sd: supplied by vcc_io
[    2.604258] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer cd
[    2.604265] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
[    2.604271] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@ff0c0000[0]'
[    2.604277] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@ff0c0000[0]'
[    2.604282] dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup
[    2.604288] dwmmc_rockchip ff0c0000.dwmmc: lookup for GPIO cd failed
[    2.604294] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer wp
[    2.604299] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
[    2.604304] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0c0000[0]'
[    2.604309] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0c0000[0]'
[    2.604313] dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup
[    2.604317] dwmmc_rockchip ff0c0000.dwmmc: lookup for GPIO wp failed
[    2.664108] usb 1-1.1: new low-speed USB device number 3 using dwc2
[    2.734140] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.755167] dwmmc_rockchip ff0c0000.dwmmc: 1 slots initialized
[    2.761253] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
[    2.768319] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=608d
[    2.768323] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.768326] usb 1-1.1: Product: lenovo USB Optical Mouse
[    2.768329] usb 1-1.1: Manufacturer: PixArt
[    2.792177] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
[    2.798969] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
[    2.804739] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
[    2.814677] dwmmc_rockchip ff0d0000.dwmmc: No vmmc regulator found
[    2.820861] dwmmc_rockchip ff0d0000.dwmmc: GPIO lookup for consumer wp
[    2.820866] dwmmc_rockchip ff0d0000.dwmmc: using device tree for GPIO lookup
[    2.820872] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0d0000[0]'
[    2.820877] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0d0000[0]'
[    2.820882] dwmmc_rockchip ff0d0000.dwmmc: using lookup tables for GPIO lookup
[    2.820887] dwmmc_rockchip ff0d0000.dwmmc: lookup for GPIO wp failed
[    2.820965] platform sdio-pwrseq: GPIO lookup for consumer reset
[    2.820970] platform sdio-pwrseq: using device tree for GPIO lookup
[    2.820982] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
[    2.821011] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
[    2.844106] usb 1-1.4: new low-speed USB device number 4 using dwc2
[    2.844139] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.864150] dwmmc_rockchip ff0d0000.dwmmc: 1 slots initialized
[    2.870250] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
[    2.878508] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
[    2.885304] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
[    2.893076] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[    2.903058] dwmmc_rockchip ff0f0000.dwmmc: GPIO lookup for consumer wp
[    2.903064] dwmmc_rockchip ff0f0000.dwmmc: using device tree for GPIO lookup
[    2.903070] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0f0000[0]'
[    2.903075] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0f0000[0]'
[    2.903079] dwmmc_rockchip ff0f0000.dwmmc: using lookup tables for GPIO lookup
[    2.903084] dwmmc_rockchip ff0f0000.dwmmc: lookup for GPIO wp failed
[    2.914131] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.934143] dwmmc_rockchip ff0f0000.dwmmc: 1 slots initialized
[    2.939975] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.946629] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.954230] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work[0]' - status (0)
[    2.954325] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power[0]' - status (0)
[    2.954458] hidraw: raw HID events driver (C) Jiri Kosina
[    2.958133] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.959639] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.962341] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.978766] input: PixArt lenovo USB Optical Mouse as /devices/platform/ff540000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:608D.0001/input/input0
[    2.991803] hid-generic 0003:17EF:608D.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt lenovo USB Optical Mouse] on usb-ff540000.usb-1.1/input0
[    2.996793] mmc2: MAN_BKOPS_EN bit is not set
[    2.997769] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[    2.997910] mmc2: new high speed MMC card at address 0001
[    2.998251] mmcblk2: mmc2:0001 AWMB3R 14.6 GiB
[    2.998380] mmcblk2boot0: mmc2:0001 AWMB3R partition 1 4.00 MiB
[    2.998505] mmcblk2boot1: mmc2:0001 AWMB3R partition 2 4.00 MiB
[    2.998615] mmcblk2rpmb: mmc2:0001 AWMB3R partition 3 4.00 MiB
[    2.998951]       boot: 0x000400000 -- 0x002400000 (32 MB)
[    2.998955]     backup: 0x002400000 -- 0x002800000 (4 MB)
[    2.998958]  linuxroot: 0x002800000 -- 0x3a3a00000 (14866 MB)
[    3.017354]  mmcblk2: p1 p2 p3
[    3.017355] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    3.075931] usbcore: registered new interface driver usbhid
[    3.079852] random: nonblocking pool is initialized
[    3.086064] usb 1-1.4: New USB device found, idVendor=17ef, idProduct=602d
[    3.086068] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.086071] usb 1-1.4: Product: Lenovo Black Silk USB Keyboard
[    3.086073] usb 1-1.4: Manufacturer: Lenovo
[    3.097457] input: Lenovo Lenovo Black Silk USB Keyboard as /devices/platform/ff540000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:602D.0002/input/input1
[    3.123866] usbhid: USB HID core driver
[    3.129203] usbcore: registered new interface driver snd-usb-audio
[    3.135965] of_get_named_gpiod_flags: parsed 'spk-con-gpio' property of node '/i2c@ff660000/es8323@10[0]' - status (0)
[    3.136016] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff660000/es8323@10[0]' - status (0)
[    3.136571] platform sound_i2s: Driver asoc-simple-card requests probe deferral
[    3.144978] u32 classifier
[    3.147699] Netfilter messages via NETLINK v0.30.
[    3.152443] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.158940] hid-generic 0003:17EF:602D.0002: input,hidraw1: USB HID v1.11 Keyboard [Lenovo Lenovo Black Silk USB Keyboard] on usb-ff540000.usb-1.4/input0
[    3.172965] ctnetlink v0.93: registering with nfnetlink.
[    3.178579] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.183956] Initializing XFRM netlink socket
[    3.188742] NET: Registered protocol family 10
[    3.193983] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.199563] sit: IPv6 over IPv4 tunneling driver
[    3.204569] NET: Registered protocol family 17
[    3.209027] NET: Registered protocol family 15
[    3.213098] input: Lenovo Lenovo Black Silk USB Keyboard as /devices/platform/ff540000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:17EF:602D.0003/input/input2
[    3.226813] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.239509] Bluetooth: RFCOMM socket layer initialized
[    3.244667] Bluetooth: RFCOMM ver 1.11
[    3.248424] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.254350] Bluetooth: HIDP socket layer initialized
[    3.259316] 8021q: 802.1Q VLAN Support v1.8
[    3.263513] lib80211: common routines for IEEE802.11 drivers
[    3.264319] hid-generic 0003:17EF:602D.0003: input,hidraw2: USB HID v1.11 Device [Lenovo Lenovo Black Silk USB Keyboard] on usb-ff540000.usb-1.4/input1
[    3.282724] lib80211_crypt: registered algorithm 'NULL'
[    3.282732] lib80211_crypt: registered algorithm 'WEP'
[    3.282739] lib80211_crypt: registered algorithm 'CCMP'
[    3.282745] lib80211_crypt: registered algorithm 'TKIP'
[    3.282753] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.287621] [BT_RFKILL]: Enter rfkill_rk_init
[    3.292226] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
[    3.292233] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 139.
[    3.300425] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
[    3.300437] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[    3.300441] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 149.
[    3.308538] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[    3.308542] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 146.
[    3.316551] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
[    3.316555] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 151.
[    3.324910] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[    3.331634] [BT_RFKILL]: Request irq for bt wakeup host
[    3.336884] [BT_RFKILL]: BT_WAKE_HOST IRQ fired
[    3.336898] [BT_RFKILL]: ** disable irq
[    3.345337] [BT_RFKILL]: bt_default device registered.
[    3.350839] ThumbEE CPU extension supported.
[    3.355129] Registering SWP/SWPB emulation handler
[    3.360346] Loading compiled-in X.509 certificates
[    3.365634] vdd10_lcd: supplied by vcc_sys
[    3.370103] vcc18_lcd: supplied by vcc_20
[    3.374830] rockchip-lvds ff96c000.lvds: neither panel nor encoder found
[    3.381655] platform ff96c000.lvds: Driver rockchip-lvds requests probe deferral
[    3.389257] vga-encoder vga-encoder: GPIO lookup for consumer psave
[    3.389263] vga-encoder vga-encoder: using device tree for GPIO lookup
[    3.389281] of_get_named_gpiod_flags: parsed 'psave-gpios' property of node '/vga-encoder[0]' - status (0)
[    3.389364] platform vga-encoder: Driver vga-encoder requests probe deferral
[    3.396725] vdd_gpu: supplied by vcc_sys
[    3.401395] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[    3.408489] mali ffa30000.gpu: Probed as mali0
[    3.413489] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
[    3.420554] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
[    3.426217] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
[    3.431926] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
[    3.438021] rk_gmac-dwmac ff290000.ethernet: init for RGMII
[    3.448765] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    3.453813]  Ring mode enabled
[    3.456875]  DMA HW capability register supported
[    3.461397]  Normal descriptors
[    3.464728]  RX Checksum Offload Engine supported (type 2)
[    3.470207]  TX Checksum insertion supported
[    3.474477]  Wake-Up On Lan supported
[    3.478163]  Enable RX Mitigation via HW Watchdog Timer
[    3.483832] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@ff290000[0]' - status (0)
[    3.714125] dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to 112
[    3.723076] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    3.728587] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    3.738230] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 4339 rev 2 pmurev 23
[    3.855140] vendor storage:20160801 ret = 0
[    3.960201] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Jul 25 2013 00:04:02 version 6.37.32.5 (r414538)
[    4.007120] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    4.512032] libphy: stmmac: probed
[    4.515473] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    4.521823] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    4.527885] platform sound_i2s: Driver asoc-simple-card requests probe deferral
[    4.536011] rockchip-lvds ff96c000.lvds: neither panel nor encoder found
[    4.542833] platform ff96c000.lvds: Driver rockchip-lvds requests probe deferral
[    4.550385] vga-encoder vga-encoder: GPIO lookup for consumer psave
[    4.550391] vga-encoder vga-encoder: using device tree for GPIO lookup
[    4.550410] of_get_named_gpiod_flags: parsed 'psave-gpios' property of node '/vga-encoder[0]' - status (0)
[    4.550608] platform sound_i2s: Driver asoc-simple-card requests probe deferral
[    4.559095] iommu: Adding device display-subsystem to group 3
[    4.564866] rockchip-drm display-subsystem: Possibly a virtual device
[    4.571475] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops)
[    4.579536] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops)
[    4.587542] dwhdmi-rockchip ff980000.hdmi: Detected HDMI controller 0x20:0xa:0xa0:0xc1
[    4.595880] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops)
[    4.604255] vga-encoder vga-encoder: bound vga-connector (ops vga_connector_ops)
[    4.611651] rockchip-lvds ff96c000.lvds: bound vga-encoder (ops vga_encoder_ops)
[    4.619077] rockchip-drm display-subsystem: bound ff96c000.lvds (ops rockchip_lvds_component_ops)
[    4.628103] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.634719] [drm] No driver support for vblank timestamp query.
[    4.640646] rockchip-drm display-subsystem: failed to parse display resources
[    4.671890] aaaaa  vga_encoder_atomic_check 125 1
[    4.689199] aaaaa  vga_encoder_atomic_check 125 1
[    4.713841] Console: switching to colour frame buffer device 240x67
[    4.713860] aaaaa  vga_encoder_atomic_check 125 1
[    4.759729] rockchip-drm display-subsystem: fb0:  frame buffer device
[    4.794439] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound_i2s[0]'
[    4.794446] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound_i2s[0]'
[    4.912559] asoc-simple-card sound_i2s: i2s-hifi <-> ff890000.i2s mapping ok
[    4.921627] asoc-simple-card sound_i2s: ES8323 HiFi <-> ff890000.i2s mapping ok
[    4.931637] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0)
[    4.931685] gpio-5 (GPIO Power): gpiod_set_debounce: missing set() or set_debounce() operations
[    4.931847] input: gpio-keys as /devices/platform/gpio-keys/input/input3
[    4.938920] rtc-hym8563 0-0051: no valid clock/calendar values available
[    4.945748] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock
[    4.959905] dovdd_1v8: disabling
[    4.963223] vcc_sd: disabling
[    4.966766] ALSA device list:
[    4.969790]   #0: rockchip,firefly-codec
[    4.974010] ttyS2 - failed to request DMA
[    4.978917] Freeing unused kernel memory: 1024K (c0e00000 - c0f00000)
[    5.012001] udevd[144]: starting version 175
[    6.228866] EXT4-fs (mmcblk2p3): 2 orphan inodes deleted
[    6.234318] EXT4-fs (mmcblk2p3): recovery complete
[    6.244886] EXT4-fs (mmcblk2p3): mounted filesystem with ordered data mode. Opts: (null)
[    6.407910] systemd[1]: System time before build time, advancing clock.
[    6.420937] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[    6.444027] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.462850] systemd[1]: Detected architecture arm.
[    6.484676] systemd[1]: Set hostname to <localhost.localdomain>.
[    6.785758] systemd[1]: Listening on udev Control Socket.
[    6.804226] systemd[1]: Reached target Swap.
[    6.824327] systemd[1]: Listening on Syslog Socket.
[    6.844261] systemd[1]: Listening on Journal Socket.
[    6.864188] systemd[1]: Reached target User and Group Name Lookups.
[    6.890111] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.914313] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.934253] systemd[1]: Listening on udev Kernel Socket.
[    6.954250] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.974172] systemd[1]: Reached target Encrypted Volumes.
[    6.994302] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.014223] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.034465] systemd[1]: Created slice User and Session Slice.
[    7.064376] systemd[1]: Created slice System Slice.
[    7.134483] systemd[1]: Starting Set console keymap...
[    7.166001] systemd[1]: Started Braille Device Support.
[    7.197829] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.225997] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    7.266052] systemd[1]: Mounting Debug File System...
[    7.301052] systemd[1]: Starting Load Kernel Modules...
[    7.326052] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.356008] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.384480] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.444540] systemd[1]: Starting Journal Service...
[    7.474355] systemd[1]: Reached target Remote File Systems (Pre).
[    7.504423] systemd[1]: Reached target Remote File Systems.
[    7.534281] systemd[1]: Reached target Slices.
[    7.596589] systemd[1]: Mounted Debug File System.
[    7.624521] systemd[1]: Started Journal Service.
[    8.386762] systemd-journald[328]: Received request to flush runtime journal from PID 1
[    8.550842] aaaaa  vga_encoder_atomic_check 125 1
[    8.617726] aaaaa  vga_encoder_atomic_check 125 1
[    8.690293] [WLAN_RFKILL]: rfkill_get_wifi_power_state: rfkill-wlan driver has not Successful initialized
[    8.690306] [BT_RFKILL]: rfkill_rk_set_power: cannot get wifi power state!
[    9.119448] aaaaa  vga_encoder_atomic_check 125 1
[    9.737601] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    9.749252] cfg80211: World regulatory domain updated:
[    9.749257] cfg80211:  DFS Master region: unset
[    9.749263] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.749269] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.749274] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.749279] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.749284] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.749290] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.749294] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.749298] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.749303] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   11.567903] aaaaa  vga_encoder_atomic_check 125 1
[   11.584402] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.584562] eth0: device MAC address 9e:f0:26:3b:31:44
[   11.621224] aaaaa  vga_encoder_atomic_check 125 1
[   11.646275] aaaaa  vga_encoder_atomic_check 125 1
[   11.755374] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.806393] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[   11.812942] brcmfmac: brcmf_add_if: ignore IF event
[   11.820139] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.051418] aaaaa  vga_encoder_atomic_check 125 1
[   12.170813] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[   12.177435] brcmfmac: brcmf_add_if: ignore IF event
[   12.209415] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.622074] aaaaa  vga_encoder_atomic_check 125 1
[   16.726498] dwhdmi-rockchip ff980000.hdmi: Rate 0 missing; compute N dynamically
[   16.743001] dwhdmi-rockchip ff980000.hdmi: Rate 0 missing; compute N dynamically
[   21.783001] [WLAN_RFKILL]: rfkill_get_wifi_power_state: rfkill-wlan driver has not Successful initialized
[   21.783016] [BT_RFKILL]: rfkill_rk_set_power: cannot get wifi power state!
[   57.132286] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   57.174483] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  102.143954] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  102.223025] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  147.147132] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  147.197015] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  163.724641] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  163.724714] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  252.544204] dwhdmi-rockchip ff980000.hdmi: Rate 0 missing; compute N dynamically
[  440.709614] usb 1-1.4: USB disconnect, device number 4
[  446.575542] usb 1-1.4: new high-speed USB device number 5 using dwc2
[  446.677434] usb 1-1.4: New USB device found, idVendor=058f, idProduct=6366
[  446.677465] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  446.677497] usb 1-1.4: Product: Flash Card Reader/Writer
[  446.677516] usb 1-1.4: Manufacturer: Generic
[  446.677533] usb 1-1.4: SerialNumber: 058F63666438
[  446.679087] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[  446.679725] scsi host0: usb-storage 1-1.4:1.0
[  447.676649] scsi 0:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[  448.210021] sd 0:0:0:0: [sda] 15638528 512-byte logical blocks: (8.01 GB/7.46 GiB)
[  448.211122] sd 0:0:0:0: [sda] Write Protect is off
[  448.211153] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[  448.211856] sd 0:0:0:0: [sda] No Caching mode page found
[  448.217310] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  448.228684]  sda: sda1
[  448.232880] sd 0:0:0:0: [sda] Attached SCSI removable disk
[  454.262938] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  459.146536] usb 1-1.4: USB disconnect, device number 5
[  465.785556] usb 1-1.4: new low-speed USB device number 6 using dwc2
[  465.915859] usb 1-1.4: New USB device found, idVendor=17ef, idProduct=602d
[  465.915912] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  465.915939] usb 1-1.4: Product: Lenovo Black Silk USB Keyboard
[  465.915962] usb 1-1.4: Manufacturer: Lenovo
[  465.939420] input: Lenovo Lenovo Black Silk USB Keyboard as /devices/platform/ff540000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:602D.0004/input/input4
[  465.996391] hid-generic 0003:17EF:602D.0004: input,hidraw1: USB HID v1.11 Keyboard [Lenovo Lenovo Black Silk USB Keyboard] on usb-ff540000.usb-1.4/input0
[  466.023324] input: Lenovo Lenovo Black Silk USB Keyboard as /devices/platform/ff540000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:17EF:602D.0005/input/input5
[  466.076170] hid-generic 0003:17EF:602D.0005: input,hidraw2: USB HID v1.11 Device [Lenovo Lenovo Black Silk USB Keyboard] on usb-ff540000.usb-1.4/input1
[  467.596738] usb 1-1.1: USB disconnect, device number 3
[  470.905603] usb 1-1.1: new high-speed USB device number 7 using dwc2
[  471.007419] usb 1-1.1: New USB device found, idVendor=058f, idProduct=6366
[  471.007452] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  471.007483] usb 1-1.1: Product: Flash Card Reader/Writer
[  471.007502] usb 1-1.1: Manufacturer: Generic
[  471.007518] usb 1-1.1: SerialNumber: 058F63666438
[  471.009188] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[  471.009833] scsi host1: usb-storage 1-1.1:1.0
[  472.006824] scsi 1:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[  472.538963] sd 1:0:0:0: [sda] 15638528 512-byte logical blocks: (8.01 GB/7.46 GiB)
[  472.539795] sd 1:0:0:0: [sda] Write Protect is off
[  472.539831] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
[  472.540670] sd 1:0:0:0: [sda] No Caching mode page found
[  472.546191] sd 1:0:0:0: [sda] Assuming drive cache: write through
[  472.560659]  sda: sda1
[  472.569201] sd 1:0:0:0: [sda] Attached SCSI removable disk
[  478.254260] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  617.653260] usb 1-1.1: USB disconnect, device number 7
[  627.616038] usb 1-1.1: new low-speed USB device number 8 using dwc2
[  627.721297] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=608d
[  627.721338] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  627.721363] usb 1-1.1: Product: lenovo USB Optical Mouse
[  627.721400] usb 1-1.1: Manufacturer: PixArt
[  627.730473] input: PixArt lenovo USB Optical Mouse as /devices/platform/ff540000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:608D.0006/input/input6
[  627.731704] hid-generic 0003:17EF:608D.0006: input,hidraw0: USB HID v1.11 Mouse [PixArt lenovo USB Optical Mouse] on usb-ff540000.usb-1.1/input0
回复

使用道具 举报

286

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
286
发表于 2017-3-29 14:57:43     
本帖最后由 huoooooo 于 2017-4-5 09:43 编辑

这里有一些可能的结果出现在pulseaudio volume control的回放选项卡中:
A.程序播放出声音并且出现在回放标签的列表中
——程序正确的使用了pulseaudio声音系统
B.程序播放出声音但是没有出现在回放标签的列表中
——程序直接调用你的声卡或者通过ALSA的混音设备进行播放。这表示pulseaudio正确的运行但是导致了混音错误
C.程序没有播放出声音但是出现在回放标签列表中
——程序正式用pulseaudio但是遇到问题,比如:pulseaudio的bug;一些ALSA核心模块的问题或者库文件的问题;你的PCM音量或主音量被设置为静音
D.程序没有播放出声音同时没有出现在回放标签的列表里
——程序正试图通过直接调用声卡或者使用ALSA的dmix设备,但是声卡正在被使用。这与B的情况不同,但是都是由于混音错误所造成的。
E. pulseaudio volume control出现问题,显示:“Connection failed: Connection refused”
——pulseaudio 守护进程没有运行
F.其他(请详述)
提示:除非你所测试的程序与pulseaudio有已知的冲突,你应当坚信A结果是会在配置好的系统上出现的

我的情况是C,可是现在alsamixer不能控制声卡,根本就调不了音量,amixer:Unable to find simple control 'PCM'(and 'Master'), 0。用pavucontrol可以控制音量,但是不起作用,不知道是驱动的问题还是设备默认静音了。


回复

使用道具 举报

286

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
286
发表于 2017-4-5 09:37:33     
自顶,up!up!up!
回复

使用道具 举报

11

积分

0

威望

0

贡献

技术小白

积分
11
发表于 2017-7-25 11:36:50     
我们也遇到了同样的问题:
[    3.644563] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.649299] [BT_RFKILL]: Enter rfkill_rk_init
[    3.653900] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 139.
[    3.662104] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 149.
[    3.670207] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 146.
[    3.678215] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 151.
[    3.686572] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[    3.693299] [BT_RFKILL]: Request irq for bt wakeup host
回复

使用道具 举报

801

积分

0

威望

0

贡献

技术大神

Rank: 3Rank: 3

积分
801
QQ
发表于 2017-8-7 11:22:44     
音量问题解决了吗?
回复

使用道具 举报

35

积分

0

威望

0

贡献

技术小白

积分
35
发表于 2021-4-15 18:05:54     
我出现的问题类似,log信息如下:
[root@rk3288:~]# aplay 1.wav
Playing WAVE '1.wav' : Unsigned 8 bit, Rate 11025 Hz, Mono
[ 8150.973826] asoc-simple-card sound: ASoC: machine hw_params failed: -22
aplay: set_params:1403: Unable to install hw params:
ACCESS:  RW_INTERLEAVED
FORMAT:  U8
SUBFORMAT:  STD
SAMPLE_BITS: 8
FRAME_BITS: 8
CHANNELS: 1
RATE: 11025
PERIOD_TIME: (124988 124989)
PERIOD_SIZE: 1378
PERIOD_BYTES: 1378
PERIODS: 4
BUFFER_TIME: (499954 499955)
BUFFER_SIZE: 5512
BUFFER_BYTES: 5512
TICK_TIME: 0
回复

使用道具 举报

*滑块验证:
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表