ubuntu 无法识别摄像头

wyglily

我从官网下载的android img  ：ITX-3588J_Android12_HDMI_220416.7z　无法烧录，提示“设备类型不匹配，停止烧录”

wyglily

1. root@firefly:~# dmesg
   
2. [    1.547782] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
   
3. [    1.547808] Linux version 5.10.66 (daijh@tchip16) (kernel commit id: 2a41db3ecf77) (sdk version: rk3588_linux_release_20220401_v0.0.1c) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #4 SMP Sat Apr 2 13:50:24 CST 2022
   
4. [    1.557858] Machine model: Firefly ITX-3588J HDMI(Linux)
   
5. [    1.557936] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
   
6. [    1.562690] printk: bootconsole [uart8250] enabled
   
7. [    1.568520] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
   
8. [    1.569688] Reserved memory: created CMA memory pool at 0x00000000ef800000, size 8 MiB
   
9. [    1.570416] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
   
10. [    1.571136] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
    
11. [    1.571879] OF: reserved mem: initialized node hdmirx-trans@10000000, compatible id shared-dma-pool
    
12. [    1.651556] Zone ranges:
    
13. [    1.651801]   DMA      [mem 0x0000000000200000-0x00000000efffffff]
    
14. [    1.652374]   DMA32    empty
    
15. [    1.652644]   Normal   empty
    
16. [    1.652913] Movable zone start for each node
    
17. [    1.653306] Early memory node ranges
    
18. [    1.653637]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
    
19. [    1.654214]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
    
20. [    1.654795] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
    
21. [    1.655444] On node 0 totalpages: 978432
    
22. [    1.655450]   DMA zone: 15352 pages used for memmap
    
23. [    1.655454]   DMA zone: 0 pages reserved
    
24. [    1.655459]   DMA zone: 978432 pages, LIFO batch:63
    
25. [    1.676287] psci: probing for conduit method from DT.
    
26. [    1.676760] psci: PSCIv1.1 detected in firmware.
    
27. [    1.677186] psci: Using standard PSCI v0.2 function IDs
    
28. [    1.677671] psci: Trusted OS migration not required
    
29. [    1.678122] psci: SMC Calling Convention v1.2
    
30. [    1.678916] percpu: Embedded 30 pages/cpu s85160 r8192 d29528 u122880
    
31. [    1.679549] pcpu-alloc: s85160 r8192 d29528 u122880 alloc=30*4096
    
32. [    1.679557] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
    
33. [    1.679704] Detected VIPT I-cache on CPU0
    
34. [    1.680121] CPU features: detected: GIC system register CPU interface
    
35. [    1.680714] CPU features: detected: Virtualization Host Extensions
    
36. [    1.681288] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
    
37. [    1.681934] alternatives: patching kernel code
    
38. [    1.682683] Built 1 zonelists, mobility grouping on.  Total pages: 963080
    
39. [    1.683313] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  storagenode=/mmc@fe2e0000 androidboot.verifiedbootstate=orange ro rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
    
40. [    1.687852] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
    
41. [    1.688812] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
    
42. [    1.689526] mem auto-init: stack:off, heap alloc:off, heap free:off
    
43. [    1.729973] Memory: 3521412K/3913728K available (17150K kernel code, 3488K rwdata, 6436K rodata, 6784K init, 609K bss, 121980K reserved, 270336K cma-reserved)
    
44. [    1.731426] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    
45. [    1.732063] ftrace: allocating 64024 entries in 251 pages
    
46. [    1.846486] ftrace: allocated 251 pages with 7 groups
    
47. [    1.847272] rcu: Hierarchical RCU implementation.
    
48. [    1.847711] rcu:     RCU event tracing is enabled.
    
49. [    1.848130]  Rude variant of Tasks RCU enabled.
    
50. [    1.848549] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
    
51. [    1.855138] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
    
52. [    1.857853] GICv3: GIC: Using split EOI/Deactivate mode
    
53. [    1.858339] GICv3: 480 SPIs implemented
    
54. [    1.858694] GICv3: 0 Extended SPIs implemented
    
55. [    1.859133] GICv3: Distributor has no Range Selector support
    
56. [    1.859660] GICv3: 16 PPIs implemented
    
57. [    1.860049] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
    
58. [    1.860812] ITS [mem 0xfe640000-0xfe65ffff]
    
59. [    1.861259] ITS@0x00000000fe640000: allocated 8192 Devices @2c00000 (indirect, esz 8, psz 64K, shr 0)
    
60. [    1.862131] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @2c10000 (flat, esz 2, psz 64K, shr 0)
    
61. [    1.863069] ITS: using cache flushing for cmd queue
    
62. [    1.863553] ITS [mem 0xfe660000-0xfe67ffff]
    
63. [    1.863987] ITS@0x00000000fe660000: allocated 8192 Devices @2c30000 (indirect, esz 8, psz 64K, shr 0)
    
64. [    1.864858] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @2c40000 (flat, esz 2, psz 64K, shr 0)
    
65. [    1.865795] ITS: using cache flushing for cmd queue
    
66. [    1.866410] GICv3: using LPI property table @0x0000000002c50000
    
67. [    1.867101] GIC: using cache flushing for LPI property table
    
68. [    1.867628] GICv3: CPU0: using allocated LPI pending table @0x0000000002c60000
    
69. [    1.868479] random: get_random_bytes called from start_kernel+0x3dc/0x5d0 with crng_init=0
    
70. [    2.003533] rockchip_cpuclk_pre_rate_change: limiting alt-divider 36254 to 31
    
71. [    2.008395] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
    
72. [    2.008969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
    
73. [    2.009970] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
    
74. [    2.012271] Console: colour dummy device 80x25
    
75. [    2.012718] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
    
76. [    2.013674] pid_max: default: 32768 minimum: 301
    
77. [    2.014310] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
    
78. [    2.015008] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
    
79. [    2.018088] rcu: Hierarchical SRCU implementation.
    
80. [    2.019794] Platform MSI: msi-controller@fe640000 domain created
    
81. [    2.020374] Platform MSI: msi-controller@fe660000 domain created
    
82. [    2.021353] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
    
83. [    2.022143] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
    
84. [    2.023569] smp: Bringing up secondary CPUs ...
    
85. [    2.025422] Detected VIPT I-cache on CPU1
    
86. [    2.025467] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
    
87. [    2.025490] GICv3: CPU1: using allocated LPI pending table @0x0000000002c70000
    
88. [    2.025542] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
    
89. [    2.027135] Detected VIPT I-cache on CPU2
    
90. [    2.027176] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
    
91. [    2.027200] GICv3: CPU2: using allocated LPI pending table @0x0000000002c80000
    
92. [    2.027250] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
    
93. [    2.028742] Detected VIPT I-cache on CPU3
    
94. [    2.028782] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
    
95. [    2.028804] GICv3: CPU3: using allocated LPI pending table @0x0000000002c90000
    
96. [    2.028850] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
    
97. [    2.030348] CPU features: detected: Spectre-v4
    
98. [    2.030352] Detected PIPT I-cache on CPU4
    
99. [    2.030368] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
    
100. [    2.030378] GICv3: CPU4: using allocated LPI pending table @0x0000000002ca0000
     
101. [    2.030404] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
     
102. [    2.031823] Detected PIPT I-cache on CPU5
     
103. [    2.031840] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
     
104. [    2.031851] GICv3: CPU5: using allocated LPI pending table @0x0000000002cb0000
     
105. [    2.031877] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
     
106. [    2.033326] Detected PIPT I-cache on CPU6
     
107. [    2.033343] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
     
108. [    2.033353] GICv3: CPU6: using allocated LPI pending table @0x0000000002cc0000
     
109. [    2.033379] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
     
110. [    2.034787] Detected PIPT I-cache on CPU7
     
111. [    2.034803] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
     
112. [    2.034814] GICv3: CPU7: using allocated LPI pending table @0x0000000002cd0000
     
113. [    2.034840] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
     
114. [    2.034929] smp: Brought up 1 node, 8 CPUs
     
115. [    2.051729] SMP: Total of 8 processors activated.
     
116. [    2.052168] CPU features: detected: Privileged Access Never
     
117. [    2.052685] CPU features: detected: User Access Override
     
118. [    2.053179] CPU features: detected: 32-bit EL0 Support
     
119. [    2.053657] CPU features: detected: Common not Private translations
     
120. [    2.054237] CPU features: detected: RAS Extension Support
     
121. [    2.054751] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
     
122. [    2.055548] CPU features: detected: CRC32 instructions
     
123. [    2.056025] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
     
124. [    2.056673] CPU features: detected: RCpc load-acquire (LDAPR)
     
125. [    2.057319] CPU: All CPU(s) started at EL2
     
126. [    2.058824] devtmpfs: initialized
     
127. [    2.069420] Registered cp15_barrier emulation handler
     
128. [    2.069892] Registered setend emulation handler
     
129. [    2.070388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
     
130. [    2.071295] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
     
131. [    2.074645] pinctrl core: initialized pinctrl subsystem
     
132. [    2.075276] regulator-dummy: no parameters, enabled
     
133. [    2.075557] NET: Registered protocol family 16
     
134. [    2.077169] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
     
135. [    2.077949] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
     
136. [    2.080082] thermal_sys: Registered thermal governor 'fair_share'
     
137. [    2.080085] thermal_sys: Registered thermal governor 'step_wise'
     
138. [    2.080942] cpuidle: using governor menu
     
139. [    2.081860] Registered FIQ tty driver
     
140. [    2.082475] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
     
141. [    2.083236] ASID allocator initialised with 65536 entries
     
142. [    2.085220] printk: console [ramoops-1] enabled
     
143. [    2.085649] pstore: Registered ramoops as persistent store backend
     
144. [    2.086218] ramoops: using 0xf0000@0x110000, ecc: 0
     
145. [    2.131282] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
     
146. [    2.132123] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
     
147. [    2.132930] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
     
148. [    2.133768] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
     
149. [    2.134605] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
     
150. [    2.135234] rockchip-pinctrl pinctrl: probed pinctrl
     
151. [    2.205092] raid6: neonx8   gen()  5481 MB/s
     
152. [    2.261870] raid6: neonx8   xor()  4222 MB/s
     
153. [    2.318655] raid6: neonx4   gen()  5495 MB/s
     
154. [    2.375436] raid6: neonx4   xor()  4253 MB/s
     
155. [    2.432220] raid6: neonx2   gen()  5169 MB/s
     
156. [    2.489005] raid6: neonx2   xor()  4037 MB/s
     
157. [    2.545790] raid6: neonx1   gen()  4464 MB/s
     
158. [    2.602573] raid6: neonx1   xor()  3324 MB/s
     
159. [    2.659357] raid6: int64x8  gen()  1302 MB/s
     
160. [    2.716139] raid6: int64x8  xor()   841 MB/s
     
161. [    2.772923] raid6: int64x4  gen()  1638 MB/s
     
162. [    2.829709] raid6: int64x4  xor()   909 MB/s
     
163. [    2.886497] raid6: int64x2  gen()  2416 MB/s
     
164. [    2.943276] raid6: int64x2  xor()  1327 MB/s
     
165. [    3.000064] raid6: int64x1  gen()  2001 MB/s
     
166. [    3.056856] raid6: int64x1  xor()  1090 MB/s
     
167. [    3.057252] raid6: using algorithm neonx4 gen() 5495 MB/s
     
168. [    3.057748] raid6: .... xor() 4253 MB/s, rmw enabled
     
169. [    3.058204] raid6: using neon recovery algorithm
     
170. [    3.059188] fiq_debugger fiq_debugger.0: IRQ fiq not found
     
171. [    3.059698] fiq_debugger fiq_debugger.0: IRQ wakeup not found
     
172. [    3.060227] fiq_debugger_probe: could not install nmi irq handler
     
173. [    3.060845] printk: console [ttyFIQ0] enabled
     
174. [    3.061623] printk: bootconsole [uart8250] disabled
     
175. [    3.062142] Registered fiq debugger ttyFIQ0
     
176. [    3.062371] vcc12v_dcin: 12000 mV, enabled
     
177. [    3.062456] reg-fixed-voltage vcc12v-dcin: vcc12v_dcin supplying 12000000uV
     
178. [    3.062506] reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
     
179. [    3.062510] vcc5v0_sys: supplied by vcc12v_dcin
     
180. [    3.062518] vcc12v_dcin: could not add device link regulator.2: -ENOENT
     
181. [    3.062533] vcc5v0_sys: 5000 mV, enabled
     
182. [    3.062591] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
     
183. [    3.062638] reg-fixed-voltage vcc5v0-usbdcin: Looking up vin-supply from device tree
     
184. [    3.062642] vcc5v0_usbdcin: supplied by vcc12v_dcin
     
185. [    3.062649] vcc12v_dcin: could not add device link regulator.3: -ENOENT
     
186. [    3.062668] vcc5v0_usbdcin: 5000 mV, enabled
     
187. [    3.062725] reg-fixed-voltage vcc5v0-usbdcin: vcc5v0_usbdcin supplying 5000000uV
     
188. [    3.062770] reg-fixed-voltage vcc5v0-usb: Looking up vin-supply from device tree
     
189. [    3.062773] vcc5v0_usb: supplied by vcc5v0_usbdcin
     
190. [    3.062779] vcc5v0_usbdcin: could not add device link regulator.4: -ENOENT
     
191. [    3.062793] vcc5v0_usb: 5000 mV, enabled
     
192. [    3.062856] reg-fixed-voltage vcc5v0-usb: vcc5v0_usb supplying 5000000uV
     
193. [    3.062911] reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
     
194. [    3.062914] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
     
195. [    3.062920] vcc5v0_sys: could not add device link regulator.5: -ENOENT
     
196. [    3.062933] vcc_1v1_nldo_s3: 1100 mV, enabled
     
197. [    3.062995] reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
     
198. [    3.063054] vcc3v3_pcie30: 3300 mV, disabled
     
199. [    3.063107] reg-fixed-voltage vcc3v3-pcie30: Looking up vin-supply from device tree
     
200. [    3.063111] vcc3v3_pcie30: supplied by vcc12v_dcin
     
201. [    3.063146] reg-fixed-voltage vcc3v3-pcie30: vcc3v3_pcie30 supplying 3300000uV
     
202. [    3.063418] iommu: Default domain type: Translated
     
203. [    3.063499] rk_iommu fdab9000.iommu: version = 2
     
204. [    3.063830] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
     
205. [    3.063846] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
     
206. [    3.063886] rk_iommu fdb50800.iommu: version = 2
     
207. [    3.064085] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
     
208. [    3.064099] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
     
209. [    3.064116] rk_iommu fdb60f00.iommu: version = 2
     
210. [    3.064309] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
     
211. [    3.064324] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
     
212. [    3.064344] rk_iommu fdb70f00.iommu: version = 2
     
213. [    3.064504] rk_iommu fdb90480.iommu: version = 2
     
214. [    3.064683] rk_iommu fdba0800.iommu: version = 2
     
215. [    3.064864] rk_iommu fdba4800.iommu: version = 2
     
216. [    3.065045] rk_iommu fdba8800.iommu: version = 2
     
217. [    3.065221] rk_iommu fdbac800.iommu: version = 2
     
218. [    3.065399] rk_iommu fdbb0800.iommu: version = 2
     
219. [    3.065537] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
     
220. [    3.065551] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
     
221. [    3.065573] rk_iommu fdbdf000.iommu: version = 2
     
222. [    3.065682] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
     
223. [    3.065696] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
     
224. [    3.065769] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
     
225. [    3.065783] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
     
226. [    3.065809] rk_iommu fdbef000.iommu: version = 2
     
227. [    3.066013] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
     
228. [    3.066027] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
     
229. [    3.066054] rk_iommu fdc38700.iommu: version = 2
     
230. [    3.066268] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
     
231. [    3.066281] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
     
232. [    3.066306] rk_iommu fdc48700.iommu: version = 2
     
233. [    3.066464] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply from device tree
     
234. [    3.066478] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply property in node /power-management@fd8d8000/power-controller failed
     
235. [    3.066502] rk_iommu fdce0800.iommu: version = 2
     
236. [    3.066624] rk_iommu fdd97e00.iommu: version = 2
     
237. [    3.066960] SCSI subsystem initialized
     
238. [    3.067030] usbcore: registered new interface driver usbfs
     
239. [    3.067047] usbcore: registered new interface driver hub
     
240. [    3.067062] usbcore: registered new device driver usb
     
241. [    3.067100] mc: Linux media interface: v0.10
     
242. [    3.067112] videodev: Linux video capture interface: v2.00
     
243. [    3.067139] pps_core: LinuxPPS API ver. 1 registered
     
244. [    3.067143] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
     
245. [    3.067150] PTP clock support registered
     
246. [    3.067417] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
     
247. [    3.067455] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
     
248. [    3.068698] Advanced Linux Sound Architecture Driver Initialized.
     
249. [    3.068904] Bluetooth: Core ver 2.22
     
250. [    3.068920] NET: Registered protocol family 31
     
251. [    3.068924] Bluetooth: HCI device and connection manager initialized
     
252. [    3.068930] Bluetooth: HCI socket layer initialized
     
253. [    3.068935] Bluetooth: L2CAP socket layer initialized
     
254. [    3.068942] Bluetooth: SCO socket layer initialized
     
255. [    3.070198] rockchip-cpuinfo cpuinfo: SoC            : 35880000
     
256. [    3.070204] rockchip-cpuinfo cpuinfo: Serial         : 0796c824252261e5
     
257. [    3.070678] clocksource: Switched to clocksource arch_sys_counter
     
258. [    3.393124] NET: Registered protocol family 2
     
259. [    3.393224] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
     
260. [    3.394312] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes, linear)
     
261. [    3.394357] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
     
262. [    3.394547] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
     
263. [    3.394947] TCP: Hash tables configured (established 32768 bind 32768)
     
264. [    3.395004] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)
     
265. [    3.395088] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)
     
266. [    3.395229] NET: Registered protocol family 1
     
267. [    3.395611] RPC: Registered named UNIX socket transport module.
     
268. [    3.395616] RPC: Registered udp transport module.
     
269. [    3.395620] RPC: Registered tcp transport module.
     
270. [    3.395623] RPC: Registered tcp NFSv4.1 backchannel transport module.
     
271. [    3.396136] PCI: CLS 0 bytes, default 64
     
272. [    3.396491] Trying to unpack rootfs image as initramfs...
     
273. [    3.617864] Freeing initrd memory: 8988K
     
274. [    3.618902] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
     
275. [    3.622370] Initialise system trusted keyrings
     
276. [    3.622481] workingset: timestamp_bits=46 max_order=20 bucket_order=0
     
277. [    3.624988] squashfs: version 4.0 (2009/01/31) Phillip Lougher
     
278. [    3.625321] NFS: Registering the id_resolver key type
     
279. [    3.625332] Key type id_resolver registered
     
280. [    3.625335] Key type id_legacy registered
     
281. [    3.625353] ntfs: driver 2.1.32 [Flags: R/O].
     
282. [    3.625418] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
     
283. [    3.625491] fuse: init (API version 7.32)
     
284. [    3.625635] SGI XFS with security attributes, no debug enabled
     
285. [    3.647733] NET: Registered protocol family 38
     
286. [    3.647743] xor: measuring software checksum speed
     
287. [    3.649319]    8regs           :  6265 MB/sec
     
288. [    3.650504]    32regs          :  8346 MB/sec
     
289. [    3.651475]    arm64_neon      : 10260 MB/sec
     
290. [    3.651480] xor: using function: arm64_neon (10260 MB/sec)
     
291. [    3.651487] Key type asymmetric registered
     
292. [    3.651492] Asymmetric key parser 'x509' registered
     
293. [    3.651510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
     
294. [    3.651655] io scheduler mq-deadline registered
     
295. [    3.651661] io scheduler kyber registered
     
296. [    3.652234] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
     
297. [    3.652479] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
     
298. [    3.653812] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply from device tree
     
299. [    3.653820] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
     
300. [    3.653865] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply from device tree
     
301. [    3.653871] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
     
302. [    3.655088] phy phy-fd5d8000.syscon:usb2-phy@8000.1: Looking up phy-supply from device tree
     
303. [    3.655167] rockchip-usb2phy fd5d8000.syscon:usb2-phy@8000: failed to create phy
     
304. [    3.655570] phy phy-fd5dc000.syscon:usb2-phy@c000.1: Looking up phy-supply from device tree
     
305. [    3.655577] rockchip-usb2phy fd5dc000.syscon:usb2-phy@c000: failed to create phy
     
306. [    3.656285] phy phy-fd5d4000.syscon:usb2-phy@4000.1: Looking up phy-supply from device tree
     
307. [    3.656292] rockchip-usb2phy fd5d4000.syscon:usb2-phy@4000: failed to create phy
     
308. [    3.657123] phy phy-fee00000.phy.1: Looking up phy-supply from device tree
     
309. [    3.657129] phy phy-fee00000.phy.1: Looking up phy-supply property in node /phy@fee00000 failed
     
310. [    3.657306] phy phy-fee10000.phy.2: Looking up phy-supply from device tree
     
311. [    3.657311] phy phy-fee10000.phy.2: Looking up phy-supply property in node /phy@fee10000 failed
     
312. [    3.658065] phy phy-fed60000.hdmiphy.3: Looking up phy-supply from device tree
     
313. [    3.658071] phy phy-fed60000.hdmiphy.3: Looking up phy-supply property in node /hdmiphy@fed60000 failed
     
314. [    3.658682] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
     
315. [    3.658846] phy phy-fed70000.hdmiphy.4: Looking up phy-supply from device tree
     
316. [    3.658852] phy phy-fed70000.hdmiphy.4: Looking up phy-supply property in node /hdmiphy@fed70000 failed
     
317. [    3.659425] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
     
318. [    3.659722] phy phy-fee80000.phy.5: Looking up phy-supply from device tree
     
319. [    3.659728] phy phy-fee80000.phy.5: Looking up phy-supply property in node /phy@fee80000 failed
     
320. [    3.660505] phy phy-fed80000.phy.6: Looking up phy-supply from device tree
     
321. [    3.660512] phy phy-fed80000.phy.6: Looking up phy-supply property in node /phy@fed80000/dp-port failed
     
322. [    3.660544] phy phy-fed80000.phy.7: Looking up phy-supply from device tree
     
323. [    3.660549] phy phy-fed80000.phy.7: Looking up phy-supply property in node /phy@fed80000/u3-port failed
     
324. [    3.662010] rk-pcie fe150000.pcie: Looking up vpcie3v3-supply from device tree
     
325. [    3.662185] rk-pcie fe170000.pcie: Looking up vpcie3v3-supply from device tree
     
326. [    3.662209] rk-pcie fe170000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe170000 failed
     
327. [    3.662226] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
     
328. [    3.662255] mpp_service mpp-srv: 0789ed832862 author: daijh 2022-03-19 firefly: add itx-rk3588j support
     
329. [    3.662262] mpp_service mpp-srv: probe start
     
330. [    3.662700] rk-pcie fe170000.pcie: missing legacy IRQ resource
     
331. [    3.662728] rk-pcie fe170000.pcie: Missing *config* reg space
     
332. [    3.662753] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
     
333. [    3.662792] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
     
334. [    3.662822] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
     
335. [    3.662854] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
     
336. [    3.662878] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
     
337. [    3.662932] rk-pcie fe170000.pcie: Missing *config* reg space
     
338. [    3.662979] rk-pcie fe170000.pcie: invalid resource
     
339. [    3.664397] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
     
340. [    3.664625] mpp_vdpu2 fdb50400.vdpu: probe device
     
341. [    3.664874] mpp_vdpu2 fdb50400.vdpu: probing finish
     
342. [    3.665074] mpp_vepu2 jpege-ccu: probing start
     
343. [    3.665080] mpp_vepu2 jpege-ccu: probing finish
     
344. [    3.665207] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
     
345. [    3.665328] mpp_vepu2 fdba0000.jpege-core: probing start
     
346. [    3.665449] mpp_vepu2 fdba0000.jpege-core: attach ccu success
     
347. [    3.665578] mpp_vepu2 fdba0000.jpege-core: probing finish
     
348. [    3.665657] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
     
349. [    3.665773] mpp_vepu2 fdba4000.jpege-core: probing start
     
350. [    3.665899] mpp_vepu2 fdba4000.jpege-core: attach ccu success
     
351. [    3.666025] mpp_vepu2 fdba4000.jpege-core: probing finish
     
352. [    3.666105] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
     
353. [    3.666222] mpp_vepu2 fdba8000.jpege-core: probing start
     
354. [    3.666344] mpp_vepu2 fdba8000.jpege-core: attach ccu success
     
355. [    3.666483] mpp_vepu2 fdba8000.jpege-core: probing finish
     
356. [    3.666555] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
     
357. [    3.666672] mpp_vepu2 fdbac000.jpege-core: probing start
     
358. [    3.666794] mpp_vepu2 fdbac000.jpege-core: attach ccu success
     
359. [    3.666924] mpp_vepu2 fdbac000.jpege-core: probing finish
     
360. [    3.667207] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
     
361. [    3.667293] mpp-iep2 fdbb0000.iep: probe device
     
362. [    3.667450] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
     
363. [    3.667572] mpp-iep2 fdbb0000.iep: probing finish
     
364. [    3.667777] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
     
365. [    3.667923] mpp_jpgdec fdb90000.jpegd: probe device
     
366. [    3.668156] mpp_jpgdec fdb90000.jpegd: probing finish
     
367. [    3.668493] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
     
368. [    3.668553] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
     
369. [    3.668644] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
     
370. [    3.668869] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
     
371. [    3.668998] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
     
372. [    3.669003] rkvdec2_init:687: No niu aclk reset resource define
     
373. [    3.669008] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
     
374. [    3.669012] rkvdec2_init:690: No niu hclk reset resource define
     
375. [    3.669050] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
     
376. [    3.669055] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
     
377. [    3.669130] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000fd600000
     
378. [    3.669134] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x0000000010000000
     
379. [    3.669139] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 524288
     
380. [    3.669143] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
     
381. [    3.669149] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
     
382. [    3.669181] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
     
383. [    3.669266] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
     
384. [    3.669461] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
     
385. [    3.669589] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
     
386. [    3.669594] rkvdec2_init:687: No niu aclk reset resource define
     
387. [    3.669598] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
     
388. [    3.669602] rkvdec2_init:690: No niu hclk reset resource define
     
389. [    3.669640] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
     
390. [    3.669665] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
     
391. [    3.669732] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000fd680000
     
392. [    3.669736] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x0000000010100000
     
393. [    3.669741] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 524288
     
394. [    3.669745] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
     
395. [    3.669751] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
     
396. [    3.669779] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
     
397. [    3.669980] mpp_rkvenc2 rkvenc-ccu: probing start
     
398. [    3.669986] mpp_rkvenc2 rkvenc-ccu: probing finish
     
399. [    3.670109] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
     
400. [    3.670264] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
     
401. [    3.670282] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
     
402. [    3.670429] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
     
403. [    3.670561] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
     
404. [    3.670633] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
     
405. [    3.670826] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
     
406. [    3.670844] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
     
407. [    3.671015] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
     
408. [    3.671145] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
     
409. [    3.671290] mpp_service mpp-srv: probe success
     
410. [    3.678653] rk-pcie fe150000.pcie: missing legacy IRQ resource
     
411. [    3.678680] rk-pcie fe150000.pcie: Missing *config* reg space
     
412. [    3.678707] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
     
413. [    3.678745] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000
     
414. [    3.678775] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
     
415. [    3.678808] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
     
416. [    3.678831] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
     
417. [    3.678877] rk-pcie fe150000.pcie: Missing *config* reg space
     
418. [    3.678925] rk-pcie fe150000.pcie: invalid resource
     
419. [    3.679303] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
     
420. [    3.679311] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
     
421. [    3.680101] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
     
422. [    3.680108] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
     
423. [    3.680897] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
     
424. [    3.680904] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
     
425. [    3.682002] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
     
426. [    3.682057] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
     
427. [    3.682108] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
     
428. [    3.682156] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
     
429. [    3.682203] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
     
430. [    3.682863] rockchip-system-monitor rockchip-system-monitor: system monitor probe
     
431. [    3.683584] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
     
432. [    3.683975] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 27, base_baud = 1500000) is a 16550A
     
433. [    3.684318] feb40000.serial: ttyS1 at MMIO 0xfeb40000 (irq = 89, base_baud = 1500000) is a 16550A
     
434. [    3.684570] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 90, base_baud = 1500000) is a 16550A
     
435. [    3.685615] random: fast init done
     
436. [    3.685667] random: crng init done
     
437. [    3.686739] rockchip-vop2 fdd90000.vop: Adding to iommu group 15
     
438. [    3.698508] brd: module loaded
     
439. [    3.701277] loop: module loaded
     
440. [    3.701445] zram: Added device: zram0
     
441. [    3.701572] lkdtm: No crash points registered, enable through debugfs
     
442. [    3.703303] rockchip-spi feb20000.spi: no high_speed pinctrl state
     
443. [    3.704376] rk806 spi2.0: chip id: RK806,ver:0x2, 0x0
     
444. [    3.704513] rk806 spi2.0: ON: 0x40 OFF:0x0
     
445. [    3.706120] rk806-regulator rk806-regulator.3.auto: Looking up vcc1-supply from device tree
     
446. [    3.706174] vdd_gpu_s0: supplied by vcc5v0_sys
     
447. [    3.706183] vcc5v0_sys: could not add device link regulator.7: -ENOENT
     
448. [    3.706334] vdd_gpu_s0: 550 <--> 950 mV at 750 mV, enabled
     
449. [    3.706649] rk806-regulator rk806-regulator.3.auto: Looking up vcc2-supply from device tree
     
450. [    3.706654] vdd_cpu_lit_s0: supplied by vcc5v0_sys
     
451. [    3.706661] vcc5v0_sys: could not add device link regulator.8: -ENOENT
     
452. [    3.706739] vdd_cpu_lit_s0: 550 <--> 950 mV at 750 mV, enabled
     
453. [    3.706982] rk806-regulator rk806-regulator.3.auto: Looking up vcc3-supply from device tree
     
454. [    3.706987] vdd_log_s0: supplied by vcc5v0_sys
     
455. [    3.706993] vcc5v0_sys: could not add device link regulator.9: -ENOENT
     
456. [    3.707070] vdd_log_s0: 750 mV, enabled
     
457. [    3.707374] rk806-regulator rk806-regulator.3.auto: Looking up vcc4-supply from device tree
     
458. [    3.707379] vdd_vdenc_s0: supplied by vcc5v0_sys
     
459. [    3.707385] vcc5v0_sys: could not add device link regulator.10: -ENOENT
     
460. [    3.707467] vdd_vdenc_s0: 550 <--> 950 mV at 750 mV, enabled
     
461. [    3.707839] rk806-regulator rk806-regulator.3.auto: Looking up vcc5-supply from device tree
     
462. [    3.707843] vdd_ddr_s0: supplied by vcc5v0_sys
     
463. [    3.707849] vcc5v0_sys: could not add device link regulator.11: -ENOENT
     
464. [    3.707989] vdd_ddr_s0: 850 mV, enabled
     
465. [    3.708088] rk806-regulator rk806-regulator.3.auto: Looking up vcc6-supply from device tree
     
466. [    3.708092] vdd2_ddr_s3: supplied by vcc5v0_sys
     
467. [    3.708098] vcc5v0_sys: could not add device link regulator.12: -ENOENT
     
468. [    3.708234] vdd2_ddr_s3: at 500 mV, enabled
     
469. [    3.708525] rk806-regulator rk806-regulator.3.auto: Looking up vcc7-supply from device tree
     
470. [    3.708529] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
     
471. [    3.708535] vcc5v0_sys: could not add device link regulator.13: -ENOENT
     
472. [    3.708612] vdd_2v0_pldo_s3: 2000 mV, enabled
     
473. [    3.708786] rk806-regulator rk806-regulator.3.auto: Looking up vcc8-supply from device tree
     
474. [    3.708791] vcc_3v3_s3: supplied by vcc5v0_sys
     
475. [    3.708796] vcc5v0_sys: could not add device link regulator.14: -ENOENT
     
476. [    3.708873] vcc_3v3_s3: 3300 mV, enabled
     
477. [    3.709092] rk806-regulator rk806-regulator.3.auto: Looking up vcc9-supply from device tree
     
478. [    3.709096] vddq_ddr_s0: supplied by vcc5v0_sys
     
479. [    3.709102] vcc5v0_sys: could not add device link regulator.15: -ENOENT
     
480. [    3.709298] vddq_ddr_s0: at 500 mV, enabled
     
481. [    3.709590] rk806-regulator rk806-regulator.3.auto: Looking up vcc10-supply from device tree
     
482. [    3.709594] vcc_1v8_s3: supplied by vcc5v0_sys
     
483. [    3.709600] vcc5v0_sys: could not add device link regulator.16: -ENOENT
     
484. [    3.709677] vcc_1v8_s3: 1800 mV, enabled
     
485. [    3.709921] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
     
486. [    3.709968] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
     
487. [    3.709976] vcc_1v1_nldo_s3: could not add device link regulator.17: -ENOENT
     
488. [    3.710122] vdd_0v75_s3: 750 mV, enabled
     
489. [    3.710420] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
     
490. [    3.710425] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
     
491. [    3.710431] vcc_1v1_nldo_s3: could not add device link regulator.18: -ENOENT
     
492. [    3.710508] vdd_ddr_pll_s0: 850 mV, enabled
     
493. [    3.710745] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
     
494. [    3.710750] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
     
495. [    3.710756] vcc_1v1_nldo_s3: could not add device link regulator.19: -ENOENT
     
496. [    3.710836] avdd_0v75_s0: 750 mV, enabled
     
497. [    3.711060] rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
     
498. [    3.711065] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
     
499. [    3.711073] vcc_1v1_nldo_s3: could not add device link regulator.20: -ENOENT
     
500. [    3.711154] vdd_0v85_s0: 850 mV, enabled
     
501. [    3.711441] nldo5_s0: at 750 mV, enabled
     
502. [    3.711502] rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
     
503. [    3.711507] nldo5_s0: supplied by vcc_1v1_nldo_s3
     
504. [    3.711750] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
     
505. [    3.711756] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
     
506. [    3.711762] vdd_2v0_pldo_s3: could not add device link regulator.22: -ENOENT
     
507. [    3.711908] avcc_1v8_s0: 1800 mV, enabled
     
508. [    3.712194] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
     
509. [    3.712200] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
     
510. [    3.712206] vdd_2v0_pldo_s3: could not add device link regulator.23: -ENOENT
     
511. [    3.712285] vcc_1v8_s0: 1800 mV, enabled
     
512. [    3.712512] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
     
513. [    3.712517] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
     
514. [    3.712523] vdd_2v0_pldo_s3: could not add device link regulator.24: -ENOENT
     
515. [    3.712599] avdd_1v2_s0: 1200 mV, enabled
     
516. [    3.712826] rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
     
517. [    3.712831] vcc_3v3_s0: supplied by vcc5v0_sys
     
518. [    3.712837] vcc5v0_sys: could not add device link regulator.25: -ENOENT
     
519. [    3.712913] vcc_3v3_s0: 3300 mV, enabled
     
520. [    3.713141] rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
     
521. [    3.713145] vccio_sd_s0: supplied by vcc5v0_sys
     
522. [    3.713151] vcc5v0_sys: could not add device link regulator.26: -ENOENT
     
523. [    3.713228] vccio_sd_s0: 1800 <--> 3300 mV at 3300 mV, enabled
     
524. [    3.713471] rk806-regulator rk806-regulator.3.auto: Looking up vcca-supply from device tree
     
525. [    3.713475] pldo6_s3: supplied by vcc5v0_sys
     
526. [    3.713481] vcc5v0_sys: could not add device link regulator.27: -ENOENT
     
527. [    3.713558] pldo6_s3: 1800 mV, enabled
     
528. [    3.713736] rk806 spi2.0: no sleep-setting state
     
529. [    3.713741] rk806 spi2.0: no reset-setting pinctrl state
     
530. [    3.713746] rk806 spi2.0: no dvs-setting pinctrl state
     
531. [    3.715900] libphy: Fixed MDIO Bus: probed
     
532. [    3.716001] CAN device driver interface
     
533. [    3.717372] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
     
534. [    3.717477] rk_gmac-dwmac fe1b0000.ethernet: Looking up phy-supply from device tree
     
535. [    3.717486] rk_gmac-dwmac fe1b0000.ethernet: Looking up phy-supply property in node /ethernet@fe1b0000 failed
     
536. [    3.717496] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
     
537. [    3.717502] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
     
538. [    3.717508] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x45).
     
539. [    3.717512] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
     
540. [    3.717517] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
     
541. [    3.717538] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
     
542. [    3.717544] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
     
543. [    3.717550] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
     
544. [    3.717562] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
     
545. [    3.717777] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
     
546. [    3.717917] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
     
547. [    3.717923] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
     
548. [    3.717929] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
     
549. [    3.717933] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
     
550. [    3.717937] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
     
551. [    3.717941] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
     
552. [    3.717969] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
     
553. [    3.717973] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
     
554. [    3.717979] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
     
555. [    3.717983] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
     
556. [    3.717987] rk_gmac-dwmac fe1b0000.ethernet: SPH feature enabled
     
557. [    3.717991] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
     
558. [    3.735788] hwrng: no data available
     
559. [    3.850699] libphy: stmmac: probed
     
560. [    3.855972] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
     
561. [    3.856087] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply from device tree
     
562. [    3.856096] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply property in node /ethernet@fe1c0000 failed
     
563. [    3.856105] rk_gmac-dwmac fe1c0000.ethernet: no regulator found
     
564. [    3.856111] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
     
565. [    3.856116] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x42).
     
566. [    3.856121] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
     
567. [    3.856125] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
     
568. [    3.856137] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
     
569. [    3.856143] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
     
570. [    3.856148] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
     
571. [    3.856160] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
     
572. [    3.856377] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
     
573. [    3.856512] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
     
574. [    3.856518] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5
     
575. [    3.856523] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
     
576. [    3.856527] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
     
577. [    3.856531] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
     
578. [    3.856536] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
     
579. [    3.856564] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
     
580. [    3.856569] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
     
581. [    3.856574] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
     
582. [    3.856578] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
     
583. [    3.856582] rk_gmac-dwmac fe1c0000.ethernet: SPH feature enabled
     
584. [    3.856587] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
     
585. [    3.868513] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
     
586. [    3.888486] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
     
587. [    3.894049] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
     
588. [    3.914047] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
     
589. [    3.920713] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
     
590. [    3.940714] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
     
591. [    3.947379] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
     
592. [    3.967379] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
     
593. [    3.974046] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
     
594. [    3.987345] libphy: stmmac: probed
     
595. [    3.991155] phy_rtl8211f_led_fixup in
     
596. [    3.994042] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
     
597. [    4.015560] usbcore: registered new interface driver rtl8150
     
598. [    4.015641] usbcore: registered new interface driver r8152
     
599. [    4.015699] usbcore: registered new interface driver asix
     
600. [    4.015757] usbcore: registered new interface driver ax88179_178a
     
601. [    4.015807] usbcore: registered new interface driver cdc_ether
     
602. [    4.015856] usbcore: registered new interface driver net1080
     
603. [    4.015905] usbcore: registered new interface driver cdc_subset
     
604. [    4.015953] usbcore: registered new interface driver zaurus
     
605. [    4.016025] usbcore: registered new interface driver cdc_ncm
     
606. [    4.016082] usbcore: registered new interface driver qmi_wwan_q
     
607. [    4.016133] usbcore: registered new interface driver qmi_wwan
     
608. [    4.028110] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
     
609. [    4.028135] ehci-pci: EHCI PCI platform driver
     
610. [    4.028160] ehci-platform: EHCI generic platform driver
     
611. [    4.028374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
     
612. [    4.028382] ohci-platform: OHCI generic platform driver
     
613. [    4.029016] usbcore: registered new interface driver cdc_acm
     
614. [    4.029020] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
     
615. [    4.029035] usbcore: registered new interface driver cdc_wdm
     
616. [    4.029158] usbcore: registered new interface driver uas
     
617. [    4.029182] usbcore: registered new interface driver usb-storage
     
618. [    4.029218] usbcore: registered new interface driver usbserial_generic
     
619. [    4.029229] usbserial: USB Serial support registered for generic
     
620. [    4.029242] usbcore: registered new interface driver ch341
     
621. [    4.029251] usbserial: USB Serial support registered for ch341-uart
     
622. [    4.029266] usbcore: registered new interface driver cp210x
     
623. [    4.029275] usbserial: USB Serial support registered for cp210x
     
624. [    4.029287] usbcore: registered new interface driver ftdi_sio
     
625. [    4.029296] usbserial: USB Serial support registered for FTDI USB Serial Device
     
626. [    4.029309] usbcore: registered new interface driver keyspan
     
627. [    4.029318] usbserial: USB Serial support registered for Keyspan - (without firmware)
     
628. [    4.029327] usbserial: USB Serial support registered for Keyspan 1 port adapter
     
629. [    4.029336] usbserial: USB Serial support registered for Keyspan 2 port adapter
     
630. [    4.029345] usbserial: USB Serial support registered for Keyspan 4 port adapter
     
631. [    4.029358] usbcore: registered new interface driver option
     
632. [    4.029367] usbserial: USB Serial support registered for GSM modem (1-port)
     
633. [    4.029380] usbcore: registered new interface driver oti6858
     
634. [    4.029388] usbserial: USB Serial support registered for oti6858
     
635. [    4.029400] usbcore: registered new interface driver pl2303
     
636. [    4.029409] usbserial: USB Serial support registered for pl2303
     
637. [    4.029421] usbcore: registered new interface driver qcserial
     
638. [    4.029430] usbserial: USB Serial support registered for Qualcomm USB modem
     
639. [    4.029442] usbcore: registered new interface driver sierra
     
640. [    4.029452] usbserial: USB Serial support registered for Sierra USB modem
     
641. [    4.029837] [HXTP] himax_hx83102_init
     
642. [    4.029842] [HXTP] himax_hx83102_probe:Enter
     
643. [    4.029845] [HXTP] Himax common touch panel driver init
     
644. [    4.029889] usbcore: registered new interface driver usbtouchscreen
     
645. [    4.030845] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input0
     
646. [    4.031065] i2c /dev entries driver
     
647. [    4.034513] rk860-regulator 0-0042: Looking up vin-supply from device tree
     
648. [    4.034568] vdd_cpu_big0_s0: supplied by vcc5v0_sys
     
649. [    4.034577] vcc5v0_sys: could not add device link regulator.28: -ENOENT
     
650. [    4.038658] vdd_cpu_big0_s0: 550 <--> 1050 mV at 800 mV, enabled
     
651. [    4.043114] rk860-regulator 0-0043: Looking up vin-supply from device tree
     
652. [    4.043119] vdd_cpu_big1_s0: supplied by vcc5v0_sys
     
653. [    4.043127] vcc5v0_sys: could not add device link regulator.29: -ENOENT
     
654. [    4.047203] vdd_cpu_big1_s0: 550 <--> 1050 mV at 800 mV, enabled
     
655. [    4.052105] rk860-regulator 1-0042: Looking up vin-supply from device tree
     
656. [    4.052111] vdd_npu_s0: supplied by vcc5v0_sys
     
657. [    4.052121] vcc5v0_sys: could not add device link regulator.30: -ENOENT
     
658. [    4.056191] vdd_npu_s0: 550 <--> 950 mV at 800 mV, enabled
     
659. [    4.061381] pca953x 6-0021: Looking up vcc-supply from device tree
     
660. [    4.061399] pca953x 6-0021: Looking up vcc-supply property in node /i2c@fec80000/gpio@21 failed
     
661. [    4.061433] pca953x 6-0021: supply vcc not found, using dummy regulator
     
662. [    4.061607] pca953x 6-0021: using no AI
     
663. [    4.066030] rtc-hym8563 6-0051: rtc information is valid
     
664. [    4.071281] rtc-hym8563 6-0051: registered as rtc0
     
665. [    4.072291] rtc-hym8563 6-0051: setting system clock to 2022-04-18T10:10:27 UTC (1650276627)
     
666. [    4.075448] rkcifhw fdce0000.rkcif: Adding to iommu group 14
     
667. [    4.075783] rkcif rkcif-mipi-lvds2: Adding to iommu group 14
     
668. [    4.075798] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.01.0a
     
669. [    4.075835] rkcif rkcif-mipi-lvds2: attach to cif hw node
     
670. [    4.075840] rkcif rkcif-mipi-lvds2: rkcif wait line 0
     
671. [    4.075846] : terminal subdev does not exist
     
672. [    4.075850] : terminal subdev does not exist
     
673. [    4.075853] : terminal subdev does not exist
     
674. [    4.075857] : terminal subdev does not exist
     
675. [    4.075862] : get_remote_sensor: video pad[0] is null
     
676. [    4.075866] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
     
677. [    4.075870] : get_remote_sensor: video pad[0] is null
     
678. [    4.075874] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
     
679. [    4.075878] : get_remote_sensor: video pad[0] is null
     
680. [    4.075882] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
     
681. [    4.075886] : get_remote_sensor: video pad[0] is null
     
682. [    4.075890] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
     
683. [    4.077419] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!
     
684. [    4.077426] rockchip-mipi-csi2: Async registered subdev
     
685. [    4.077439] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!
     
686. [    4.078993] rk_hdmirx fdee0000.hdmirx-controller: assigned reserved memory node hdmirx-trans@10000000
     
687. [    4.080264] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
     
688. [    4.080344] usbcore: registered new interface driver uvcvideo
     
689. [    4.080348] USB Video Class driver (1.1.1)
     
690. [    4.081513] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
     
691. [    4.082004] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
     
692. [    4.082413] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
     
693. [    4.082613] Bluetooth: HCI UART driver ver 2.3
     
694. [    4.082619] Bluetooth: HCI UART protocol H4 registered
     
695. [    4.082623] Bluetooth: HCI UART protocol ATH3K registered
     
696. [    4.082644] usbcore: registered new interface driver bfusb
     
697. [    4.082661] usbcore: registered new interface driver btusb
     
698. [    4.082755] cpu cpu0: Failed to get cpu_leakage
     
699. [    4.082783] cpu cpu0: Looking up cpu-supply from device tree
     
700. [    4.082863] cpu cpu0: Looking up mem-supply from device tree
     
701. [    4.082939] cpu cpu4: Failed to get cpu_leakage
     
702. [    4.082955] cpu cpu4: Looking up cpu-supply from device tree
     
703. [    4.083468] cpu cpu4: Looking up mem-supply from device tree
     
704. [    4.083989] cpu cpu6: Failed to get cpu_leakage
     
705. [    4.084015] cpu cpu6: Looking up cpu-supply from device tree
     
706. [    4.084521] cpu cpu6: Looking up mem-supply from device tree
     
707. [    4.085538] cpu cpu0: avs=0
     
708. [    4.086085] cpu cpu4: avs=0
     
709. [    4.086643] cpu cpu6: avs=0
     
710. [    4.086773] cpu cpu0: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 1 >= em_perf_state0
     
711. [    4.086852] cpu cpu0: EM: created perf domain
     
712. [    4.086898] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
     
713. [    4.087200] cpu cpu4: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 1 >= em_perf_state0
     
714. [    4.087304] cpu cpu4: EM: created perf domain
     
715. [    4.087347] cpu cpu4: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
     
716. [    4.096146] cpu cpu6: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 1 >= em_perf_state0
     
717. [    4.096252] cpu cpu6: EM: created perf domain
     
718. [    4.096297] cpu cpu6: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
     
719. [    4.113329] sdhci: Secure Digital Host Controller Interface driver
     
720. [    4.113338] sdhci: Copyright(c) Pierre Ossman
     
721. [    4.113341] Synopsys Designware Multimedia Card Interface Driver
     
722. [    4.113752] sdhci-pltfm: SDHCI platform and OF driver helper
     
723. [    4.114194] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
     
724. [    4.114214] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
     
725. [    4.114224] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
     
726. [    4.114258] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 77,32 bit host data width,256 deep fifo
     
727. [    4.114333] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
     
728. [    4.114342] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply property in node /mmc@fe2c0000 failed
     
729. [    4.114506] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
     
730. [    4.114512] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
     
731. [    4.115673] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
     
732. [    4.115700] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
     
733. [    4.116022] hid: raw HID events driver (C) Jiri Kosina
     
734. [    4.116161] usbcore: registered new interface driver usbhid
     
735. [    4.116165] usbhid: USB HID core driver
     
736. [    4.117386] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
     
737. [    4.117397] dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
     
738. [    4.117405] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
     
739. [    4.117948] rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
     
740. [    4.125134] usbcore: registered new interface driver snd-usb-audio
     
741. [    4.129559] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply from device tree
     
742. [    4.129579] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply property in node /power-management@fd8d8000/power-controller failed
     
743. [    4.131902] debugfs: File 'Capture' in directory 'dapm' already present!
     
744. [    4.132940] input: rockchip,dp0 rockchip,dp0 as /devices/platform/dp0-sound/sound/card0/input1
     
745. [    4.134439] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
     
746. [    4.143109] ES8323 3-0011: ASoC: error at soc_component_write_no_lock on ES8323.3-0011: -5
     
747. [    4.148397] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
     
748. [    4.179514] mmc1: new HS400 Enhanced strobe MMC card at address 0001
     
749. [    4.180001] mmcblk1: mmc1:0001 TX2932 29.1 GiB
     
750. [    4.180148] mmcblk1boot0: mmc1:0001 TX2932 partition 1 4.00 MiB
     
751. [    4.180299] mmcblk1boot1: mmc1:0001 TX2932 partition 2 4.00 MiB
     
752. [    4.180426] mmcblk1rpmb: mmc1:0001 TX2932 partition 3 4.00 MiB, chardev (237:0)
     
753. [    4.182649]  mmcblk1: p1 p2 p3 p4 p5 p6 p7
     
754. [    4.191017] input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card1/input2
     
755. [    4.193138] IPVS: Registered protocols (TCP, UDP)
     
756. [    4.193260] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
     
757. [    4.193535] IPVS: ipvs loaded.
     
758. [    4.193553] IPVS: [rr] scheduler registered.
     
759. [    4.194240] Initializing XFRM netlink socket
     
760. [    4.195014] NET: Registered protocol family 10
     
761. [    4.196618] Segment Routing with IPv6
     
762. [    4.196830] NET: Registered protocol family 17
     
763. [    4.196864] NET: Registered protocol family 15
     
764. [    4.196978] Bridge firewalling registered
     
765. [    4.196992] can: controller area network core
     
766. [    4.197063] NET: Registered protocol family 29
     
767. [    4.197077] can: raw protocol
     
768. [    4.197092] can: broadcast manager protocol
     
769. [    4.197113] can: netlink gateway - max_hops=1
     
770. [    4.197668] Bluetooth: RFCOMM socket layer initialized
     
771. [    4.197770] Bluetooth: RFCOMM ver 1.11
     
772. [    4.197794] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
     
773. [    4.197813] Bluetooth: HIDP socket layer initialized
     
774. [    4.197889] [BT_RFKILL]: Enter rfkill_rk_init
     
775. [    4.197902] [WLAN_RFKILL]: Enter rfkill_wlan_init
     
776. [    4.198849] [WLAN_RFKILL]: Enter rfkill_wlan_probe
     
777. [    4.198902] [WLAN_RFKILL]: can't find rockchip,grf property
     
778. [    4.198918] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275p
     
779. [    4.198932] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
     
780. [    4.198946] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
     
781. [    4.199050] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.
     
782. [    4.199109] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0.
     
783. [    4.199128] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
     
784. [    4.199141] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
     
785. [    4.199156] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
     
786. [    4.199170] [WLAN_RFKILL]: Exit rfkill_wlan_probe
     
787. [    4.200532] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 34.
     
788. [    4.200657] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 22.
     
789. [    4.200727] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 21.
     
790. [    4.200760] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.
     
791. [    4.201720] [BT_RFKILL]: Request irq for bt wakeup host
     
792. [    4.201844] [BT_RFKILL]: ** disable irq
     
793. [    4.202046] [BT_RFKILL]: bt_default device registered.
     
794. [    4.202243] Key type dns_resolver registered
     
795. [    4.204087] xc7160 3-001b: T-chip firefly camera driver version: 00.01.02
     
796. [    4.204215] xc7160 3-001b: Failed to get power-gpios, maybe no use
     
797. [    4.204306] xc7160 3-001b: Looking up avdd-supply from device tree
     
798. [    4.204332] xc7160 3-001b: Looking up avdd-supply property in node /i2c@feab0000/XC7160b@1b failed
     
799. [    4.204397] xc7160 3-001b: supply avdd not found, using dummy regulator
     
800. [    4.204619] xc7160 3-001b: Looking up dovdd-supply from device tree
     
801. [    4.204645] xc7160 3-001b: Looking up dovdd-supply property in node /i2c@feab0000/XC7160b@1b failed
     
802. [    4.204730] xc7160 3-001b: supply dovdd not found, using dummy regulator
     
803. [    4.204805] xc7160 3-001b: Looking up dvdd-supply from device tree
     
804. [    4.204828] xc7160 3-001b: Looking up dvdd-supply property in node /i2c@feab0000/XC7160b@1b failed
     
805. [    4.204854] xc7160 3-001b: supply dvdd not found, using dummy regulator
     
806. [    4.204941] xc7160 3-001b: could not get default pinstate
     
807. [    4.204957] xc7160 3-001b: could not get sleep pinstate
     
808. [    4.204991] xc7160 3-001b: Success to get xc7160 endpoint data lanes, dts uses 4 lanes
     
809. [    4.205007] xc7160 3-001b: xc7160 num data lanes is 4
     
810. [    4.221375] xc7160 3-001b: isp chip is xc7160
     
811. [    4.222080] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_xc7160 3-001b:bus type 5
     
812. [    4.223403] rkcif-mipi-lvds2: Async subdev notifier completed
     
813. [    4.225644] Loading compiled-in X.509 certificates
     
814. [    4.227395] vendor storage:20190527 ret = 0
     
815. [    4.229972] Btrfs loaded, crc32c=crc32c-generic
     
816. [    4.230436] pstore: Using crash dump compression: deflate
     
817. [    4.231418] rga3_core0 fdb60000.rga: Adding to iommu group 2
     
818. [    4.232090] rga: rga3_core0_irq, irq = 35, match scheduler
     
819. [    4.232899] rga: Driver loaded successfully rga[3] ver:3.0.76831
     
820. [    4.233042] rga: probe successfully
     
821. [    4.234380] rga3_core1 fdb70000.rga: Adding to iommu group 3
     
822. [    4.235040] rga: rga3_core1_irq, irq = 36, match scheduler
     
823. [    4.235798] rga: Driver loaded successfully rga[3] ver:3.0.76831
     
824. [    4.235936] rga: probe successfully
     
825. [    4.237270] rga: rga2_irq, irq = 37, match scheduler
     
826. [    4.238159] rga: Driver loaded successfully rga[3] ver:3.2.63318
     
827. [    4.238291] rga: probe successfully
     
828. [    4.239451] rga: Module initialized. v1.2.0
     
829. [    4.253392] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply from device tree
     
830. [    4.253468] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply property in node /power-management@fd8d8000/power-controller failed
     
831. [    4.282902] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
     
832. [    4.282979] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
     
833. [    4.283077] mali fb000000.gpu: Kernel DDK version g10p0-01eac0
     
834. [    4.283156] mali fb000000.gpu: Looking up mali-supply from device tree
     
835. [    4.283338] reg-fixed-voltage vcc5v0-host: Looking up vin-supply from device tree
     
836. [    4.283371] vcc5v0_host: supplied by vcc5v0_usb
     
837. [    4.283411] vcc5v0_usb: could not add device link regulator.31: -ENOENT
     
838. [    4.283490] mali fb000000.gpu: Looking up mem-supply from device tree
     
839. [    4.283689] mali fb000000.gpu: Looking up mali-supply from device tree
     
840. [    4.283730] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
     
841. [    4.283740] vdd_gpu_s0: Failed to create debugfs directory
     
842. [    4.283758] mali fb000000.gpu: Looking up mem-supply from device tree
     
843. [    4.283791] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
     
844. [    4.283800] vdd_gpu_s0: Failed to create debugfs directory
     
845. [    4.283922] vcc5v0_host: 5000 mV, enabled
     
846. [    4.284071] mali fb000000.gpu: Failed to get gpu_leakage
     
847. [    4.284404] reg-fixed-voltage vcc5v0-host: vcc5v0_host supplying 5000000uV
     
848. [    4.285574] reg-fixed-voltage vcc5v0-host3: Looking up vin-supply from device tree
     
849. [    4.285601] vcc5v0_host3: supplied by vcc5v0_usb
     
850. [    4.285675] vcc5v0_usb: could not add device link regulator.32: -ENOENT
     
851. [    4.286396] mali fb000000.gpu: avs=0
     
852. [    4.286631] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 132; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
     
853. [    4.286924] vcc5v0_host3: 5000 mV, enabled
     
854. [    4.287138] mali fb000000.gpu: r0p0 status 5 is unknown; treating as r0p0 status 0
     
855. [    4.287168] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
     
856. [    4.287256] reg-fixed-voltage vcc5v0-host3: vcc5v0_host3 supplying 5000000uV
     
857. [    4.287323] mali fb000000.gpu: No priority control manager is configured
     
858. [    4.287380] mali fb000000.gpu: No memory group manager is configured
     
859. [    4.287449] mali fb000000.gpu: Protected memory allocator not available
     
860. [    4.287601] reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
     
861. [    4.287705] pcie30_avdd1v8: supplied by avcc_1v8_s0
     
862. [    4.287729] avcc_1v8_s0: could not add device link regulator.33: -ENOENT
     
863. [    4.287796] pcie30_avdd1v8: 1800 mV, enabled
     
864. [    4.288075] reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
     
865. [    4.288308] reg-fixed-voltage pcie30-avdd0v75: Looking up vin-supply from device tree
     
866. [    4.288330] pcie30_avdd0v75: supplied by avdd_0v75_s0
     
867. [    4.288352] avdd_0v75_s0: could not add device link regulator.34: -ENOENT
     
868. [    4.288406] pcie30_avdd0v75: 750 mV, enabled
     
869. [    4.288649] reg-fixed-voltage pcie30-avdd0v75: pcie30_avdd0v75 supplying 750000uV
     
870. [    4.288789] mali fb000000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
     
871. [    4.289989] vcc_hub_reset: no parameters, enabled
     
872. [    4.290030] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
     
873. [    4.290059] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
     
874. [    4.290409] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
     
875. [    4.290569] reg-fixed-voltage vcc-hub-reset-regulator: vcc_hub_reset supplying 0uV
     
876. [    4.290791] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
     
877. [    4.291142] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
     
878. [    4.295080] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
     
879. [    4.295490] vcc_hub3_reset: no parameters, enabled
     
880. [    4.295520] mali fb000000.gpu: Probed as mali0
     
881. [    4.295790] reg-fixed-voltage vcc-hub3-reset-regulator: vcc_hub3_reset supplying 0uV
     
882. [    4.297636] vcc_sata_pwr_en: no parameters, enabled
     
883. [    4.297735] reg-fixed-voltage vcc-sata-pwr-en-regulator: vcc_sata_pwr_en supplying 0uV
     
884. [    4.298864] vcc_fan_pwr_en: no parameters, enabled
     
885. [    4.298969] reg-fixed-voltage vcc-fan-pwr-en-regulator: vcc_fan_pwr_en supplying 0uV
     
886. [    4.299749] vbus5v0_typec_pwr_en: no parameters, disabled
     
887. [    4.299844] reg-fixed-voltage vbus5v0-typec-pwr-en-regulator: vbus5v0_typec_pwr_en supplying 0uV
     
888. [    4.300979] vcc_sdcard_pwr_en: no parameters, enabled
     
889. [    4.301083] reg-fixed-voltage vcc-sdcard-pwr-en-regulator: vcc_sdcard_pwr_en supplying 0uV
     
890. [    4.301788] phy phy-fd5d8000.syscon:usb2-phy@8000.8: Looking up phy-supply from device tree
     
891. [    4.301880] vcc5v0_host: could not add device link phy-fd5d8000.syscon:usb2-phy@8000.8: -ENOENT
     
892. [    4.303455] phy phy-fd5dc000.syscon:usb2-phy@c000.9: Looking up phy-supply from device tree
     
893. [    4.303470] vcc5v0_host: could not add device link phy-fd5dc000.syscon:usb2-phy@c000.9: -ENOENT
     
894. [    4.304026] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
     
895. [    4.304142] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
     
896. [    4.304153] pci_bus 0002:20: root bus resource [bus 20-2f]
     
897. [    4.304161] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
     
898. [    4.304169] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])
     
899. [    4.304177] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
     
900. [    4.304184] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
     
901. [    4.304216] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
     
902. [    4.304239] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
     
903. [    4.304297] pci 0002:20:00.0: supports D1 D2
     
904. [    4.304303] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
     
905. [    4.308751] pci 0002:20:00.0: Primary bus is hard wired to 0
     
906. [    4.308760] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
     
907. [    4.308977] pci 0002:21:00.0: [14e4:449d] type 00 class 0x028000
     
908. [    4.309083] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
     
909. [    4.309147] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
     
910. [    4.309780] pci 0002:21:00.0: supports D1 D2
     
911. [    4.309787] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
     
912. [    4.311174] phy phy-fd5d4000.syscon:usb2-phy@4000.10: Looking up phy-supply from device tree
     
913. [    4.311214] vcc5v0_host: could not add device link phy-fd5d4000.syscon:usb2-phy@4000.10: -ENOENT
     
914. [    4.311477] phy phy-fd5d4000.syscon:usb2-phy@4000.10: Looking up vbus-supply from device tree
     
915. [    4.311501] phy phy-fd5d4000.syscon:usb2-phy@4000.10: Looking up vbus-supply property in node /syscon@fd5d4000/usb2-phy@4000/otg-port failed
     
916. [    4.316349] phy phy-fed90000.phy.11: Looking up phy-supply from device tree
     
917. [    4.316374] phy phy-fed90000.phy.11: Looking up phy-supply property in node /phy@fed90000/dp-port failed
     
918. [    4.316521] phy phy-fed90000.phy.12: Looking up phy-supply from device tree
     
919. [    4.316540] phy phy-fed90000.phy.12: Looking up phy-supply property in node /phy@fed90000/u3-port failed
     
920. [    4.330021] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
     
921. [    4.330223] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf27fffff]
     
922. [    4.330233] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
     
923. [    4.330244] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2400000-0xf27fffff 64bit]
     
924. [    4.330298] pci 0002:21:00.0: BAR 0: assigned [mem 0xf2200000-0xf220ffff 64bit]
     
925. [    4.330354] pci 0002:20:00.0: PCI bridge to [bus 21]
     
926. [    4.330363] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf27fffff]
     
927. [    4.331314] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
     
928. [    4.331329] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
     
929. [    4.331348] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
     
930. [    4.331358] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
     
931. [    4.331594] [drm] failed to init overlay plane Cluster0-win1
     
932. [    4.331631] [drm] failed to init overlay plane Cluster1-win1
     
933. [    4.331665] [drm] failed to init overlay plane Cluster2-win1
     
934. [    4.331702] [drm] failed to init overlay plane Cluster3-win1
     
935. [    4.332200] pcieport 0002:20:00.0: PME: Signaling with IRQ 145
     
936. [    4.352191] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc0111da960)
     
937. [    4.353268] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
     
938. [    4.353521] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0111e2640)
     
939. [    4.354171] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
     
940. [    4.354392] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc0111e2640)
     
941. [    4.354449] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc0111e4800)
     
942. [    4.354483] rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffffffc0111e4800)
     
943. [    4.354925] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
     
944. [    4.456605] rockchip-usbdp-phy fed90000.phy: cmn ana lcpll lock timeout
     
945. [    4.456663] rockchip-usbdp-phy fed90000.phy: failed to init combophy
     
946. [    4.456708] phy phy-fed90000.phy.11: phy poweron failed --> -110
     
947. [    4.456745] rockchip-drm display-subsystem: connector[DP-2] can't found any modes
     
948. [    4.456994] rockchip-drm display-subsystem: connector[HDMI-A-2] can't found any modes
     
949. [    4.457026] rockchip-drm display-subsystem: can't not find any logo display
     
950. [    4.457062] rockchip-drm display-subsystem: failed to show kernel logo
     
951. [    4.457180] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
     
952. [    4.459768] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
     
953. [    4.467933] phy phy-fd5d4000.syscon:usb2-phy@4000.10: illegal mode
     
954. [    4.468011] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
     
955. [    4.468398] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 1
     
956. [    4.468663] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
     
957. [    4.468771] xhci-hcd xhci-hcd.11.auto: irq 130, io mem 0xfc400000
     
958. [    4.469395] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
     
959. [    4.469428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
960. [    4.469452] usb usb1: Product: xHCI Host Controller
     
961. [    4.469476] usb usb1: Manufacturer: Linux 5.10.66 xhci-hcd
     
962. [    4.469498] usb usb1: SerialNumber: xhci-hcd.11.auto
     
963. [    4.470530] hub 1-0:1.0: USB hub found
     
964. [    4.470610] hub 1-0:1.0: 1 port detected
     
965. [    4.471394] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
     
966. [    4.471748] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 2
     
967. [    4.471792] xhci-hcd xhci-hcd.11.auto: Host supports USB 3.0 SuperSpeed
     
968. [    4.471936] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
     
969. [    4.472185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
     
970. [    4.472214] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
971. [    4.472237] usb usb2: Product: xHCI Host Controller
     
972. [    4.472260] usb usb2: Manufacturer: Linux 5.10.66 xhci-hcd
     
973. [    4.472282] usb usb2: SerialNumber: xhci-hcd.11.auto
     
974. [    4.473247] hub 2-0:1.0: USB hub found
     
975. [    4.473323] hub 2-0:1.0: 1 port detected
     
976. [    4.475108] input: adc-keys as /devices/platform/adc-keys/input/input3
     
977. [    4.476148] typec_fusb302 6-0022: Looking up vbus-supply from device tree
     
978. [    4.499511] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card3/input4
     
979. [    4.503785] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card4/input5
     
980. [    4.509436] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
     
981. [    4.509828] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 3
     
982. [    4.510055] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
     
983. [    4.568405] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
     
984. [    4.568459] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
985. [    4.568484] usb usb3: Product: Generic Platform OHCI controller
     
986. [    4.568508] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd
     
987. [    4.568531] usb usb3: SerialNumber: fc8c0000.usb
     
988. [    4.569661] hub 3-0:1.0: USB hub found
     
989. [    4.569778] hub 3-0:1.0: 1 port detected
     
990. [    4.571632] ehci-platform fc880000.usb: EHCI Host Controller
     
991. [    4.572087] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 4
     
992. [    4.572335] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
     
993. [    4.584098] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
     
994. [    4.584502] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
     
995. [    4.584533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
996. [    4.584558] usb usb4: Product: EHCI Host Controller
     
997. [    4.584581] usb usb4: Manufacturer: Linux 5.10.66 ehci_hcd
     
998. [    4.584603] usb usb4: SerialNumber: fc880000.usb
     
999. [    4.585615] hub 4-0:1.0: USB hub found
     
1000. [    4.585693] hub 4-0:1.0: 1 port detected
      
1001. [    4.589864] ohci-platform fc840000.usb: Generic Platform OHCI controller
      
1002. [    4.590365] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 5
      
1003. [    4.590562] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
      
1004. [    4.648436] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
      
1005. [    4.648500] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
      
1006. [    4.648525] usb usb5: Product: Generic Platform OHCI controller
      
1007. [    4.648549] usb usb5: Manufacturer: Linux 5.10.66 ohci_hcd
      
1008. [    4.648571] usb usb5: SerialNumber: fc840000.usb
      
1009. [    4.649569] hub 5-0:1.0: USB hub found
      
1010. [    4.649645] hub 5-0:1.0: 1 port detected
      
1011. [    4.651404] ehci-platform fc800000.usb: EHCI Host Controller
      
1012. [    4.651804] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 6
      
1013. [    4.652042] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
      
1014. [    4.720772] usb 1-1: new high-speed USB device number 2 using xhci-hcd
      
1015. [    4.734106] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
      
1016. [    4.734629] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
      
1017. [    4.734661] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
      
1018. [    4.734685] usb usb6: Product: EHCI Host Controller
      
1019. [    4.734708] usb usb6: Manufacturer: Linux 5.10.66 ehci_hcd
      
1020. [    4.734730] usb usb6: SerialNumber: fc800000.usb
      
1021. [    4.735736] hub 6-0:1.0: USB hub found
      
1022. [    4.735814] hub 6-0:1.0: 1 port detected
      
1023. [    4.737588] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
      
1024. [    4.737697] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
      
1025. [    4.737868] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
      
1026. [    4.737950] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
      
1027. [    4.740504] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.361.11 (wlan=r892223-20210630-1)
      
1028.                drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Apr  1 2022 at 10:26:45
      
1029. 
      
1030. [    4.740528] [dhd] ======== dhd_wlan_init_plat_data ========
      
1031. [    4.740539] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
      
1032. [    4.740618] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=147, oob_irq_flags=0x411
      
1033. [    4.740628] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
      
1034. [    4.740636] [dhd] dhd_wifi_platform_load: Enter
      
1035. [    4.740642] rkcif rkcif-mipi-lvds2: clear unready subdev num: 0
      
1036. [    4.740864] [dhd] dhdpcie_pci_probe : no mutex held. set lock
      
1037. [    4.740878] [dhd] PCI_PROBE:  bus 21, slot 0,vendor 14E4, device 449D(good PCI location)
      
1038. [    4.740890] [dhd] dhdpcie_init: found adapter info 'DHD generic adapter'
      
1039. [    4.740972] pcieh 0002:21:00.0: enabling device (0000 -> 0002)
      
1040. [    4.741259] RKNPU fdab0000.npu: Adding to iommu group 0
      
1041. [    4.741385] [dhd] Disable CTO
      
1042. [    4.741486] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
      
1043. [    4.741557] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
      
1044. [    4.742098] RKNPU fdab0000.npu: Looking up mem-supply from device tree
      
1045. [    4.742137] [dhd] ******** Perform FLR ********
      
1046. [    4.742587] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
      
1047. [    4.742610] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
      
1048. [    4.742621] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
      
1049. [    4.742917] [drm] Initialized rknpu 0.6.4 20211227 for fdab0000.npu on minor 1
      
1050. [    4.743257] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
      
1051. [    4.743276] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
      
1052. [    4.743313] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
      
1053. [    4.743336] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
      
1054. [    4.743362] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
      
1055. [    4.743377] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
      
1056. [    4.743451] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
      
1057. [    4.743467] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
      
1058. [    4.743470] vdd_npu_s0: Failed to create debugfs directory
      
1059. [    4.743924] RKNPU fdab0000.npu: Looking up mem-supply from device tree
      
1060. [    4.743938] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
      
1061. [    4.743941] vdd_npu_s0: Failed to create debugfs directory
      
1062. [    4.744461] RKNPU fdab0000.npu: Failed to get npu_leakage
      
1063. [    4.744973] RKNPU fdab0000.npu: avs=0
      
1064. [    4.745061] RKNPU fdab0000.npu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
      
1065. [    4.757179] RKNPU fdab0000.npu: failed to find power_model node
      
1066. [    4.757233] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
      
1067. [    4.757257] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
      
1068. [    4.758513] cfg80211: Loading compiled-in X.509 certificates for regulatory database
      
1069. [    4.766579] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
      
1070. [    4.767757] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
      
1071. [    4.767779] cfg80211: failed to load regulatory.db
      
1072. [    4.768706] rockchip-pm rockchip-suspend: not set pwm-regulator-config
      
1073. [    4.770821] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '10:26:23', on 'Apr  1 2022'.
      
1074. [    4.771648] Mali:
      
1075. [    4.771654] Mali device driver loaded
      
1076. [    4.778022] ret 1024 0
      
1077. [    4.778410] ALSA device list:
      
1078. [    4.778496]   #0: rockchip,dp0
      
1079. [    4.778517]   #1: rockchip-es8388
      
1080. [    4.778535]   #2: rockchip,hdmiin
      
1081. [    4.778554]   #3: rockchip-hdmi0
      
1082. [    4.778571]   #4: rockchip-hdmi1
      
1083. [    4.791824] Freeing unused kernel memory: 6784K
      
1084. [    4.817571] [dhd] read_config: reg=0x88 read val=0xb080
      
1085. [    4.817650] [dhd] read_config: reg=0x88 read val=0xb080
      
1086. [    4.817719] [dhd] read_config: reg=0x88 read val=0xb080
      
1087. [    4.817786] [dhd] read_config: reg=0x88 read val=0xb080
      
1088. [    4.817854] [dhd] read_config: reg=0x88 read val=0xb080
      
1089. [    4.817921] [dhd] read_config: reg=0x88 read val=0xb080
      
1090. [    4.817990] [dhd] read_config: reg=0x88 read val=0xb080
      
1091. [    4.818058] [dhd] read_config: reg=0x88 read val=0xb080
      
1092. [    4.818126] [dhd] read_config: reg=0x88 read val=0xb080
      
1093. [    4.818194] [dhd] read_config: reg=0x88 read val=0xb080
      
1094. [    4.818261] [dhd] read_config: reg=0x88 read val=0xb080
      
1095. [    4.818329] [dhd] read_config: reg=0x88 read val=0xb080
      
1096. [    4.818396] [dhd] read_config: reg=0x88 read val=0xb080
      
1097. [    4.818464] [dhd] read_config: reg=0x88 read val=0xb080
      
1098. [    4.818531] [dhd] read_config: reg=0x88 read val=0xb080
      
1099. [    4.818599] [dhd] read_config: reg=0x88 read val=0xb080
      
1100. [    4.818667] [dhd] read_config: reg=0x88 read val=0xb080
      
1101. [    4.818735] [dhd] read_config: reg=0x88 read val=0x8080
      
1102. [    4.819255] [dhd] ******** FLR Succedeed ********
      
1103. [    4.819564] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
      
1104. [    4.819571] [dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x0
      
1105. [    4.819622] [dhd] dhd_conf_set_chiprev : devid=0x449d, chip=0xaae8, chiprev=2, svid=0x14e4, ssid=0xaae8
      
1106. [    4.820987] [dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 1025
      
1107. [    4.821028] [dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 4097
      
1108. [    4.821219] [dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 36865
      
1109. [    4.822004] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1110. [    4.822012] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1111. [    4.822017] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1112. [    4.822021] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1113. [    4.822026] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1114. [    4.822383] [dhd] dhd_attach(): thread:dhd_watchdog_thread:f8 started
      
1115. [    4.822394] [dhd] dhd_deferred_work_init: work queue initialized
      
1116. [    4.822399] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 3
      
1117. [    4.822409] [dhd] dhd_cpumasks_init CPU masks primary(big)=0x0 secondary(little)=0xfe
      
1118. [    4.822737] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
      
1119. [    4.822761] [dhd] dhdpcie_bus_attach: making DHD_BUS_DOWN
      
1120. [    4.822781] [dhd] dhdpcie_init: rc_dev from dev->bus->self (1d87:3588) is 0000000047859425
      
1121. [    4.822933] [dhd] dhdpcie_init: rc_ep_aspm_cap: 1 rc_ep_l1ss_cap: 1
      
1122. [    4.822969] [dhd] dhdpcie_request_irq: INTx enabled
      
1123. [    4.823032] [dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x400000
      
1124. [    4.823053] [dhd] Dongle Host Driver, version 101.10.361.11 (wlan=r892223-20210630-1)
      
1125.                drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Apr  1 2022 at 10:26:45
      
1126. 
      
1127. [    4.823923] [dhd] Register interface [wlan0]  MAC: 00:90:4c:50:dc:a7
      
1128. 
      
1129. [    4.824060] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 3 -> mode 0
      
1130. [    4.824099] [dhd] dhd_rtt_deinit: ENTER
      
1131. [    4.824113] [dhd] dhd_rtt_deinit: EXIT, err = 0
      
1132. [    4.824115] Run /init as init process
      
1133. [    4.824122]   with arguments:
      
1134. [    4.824129] [dhd] dhd_bus_devreset: == Power OFF ==
      
1135. [    4.824143]     /init
      
1136. [    4.824146]   with environment:
      
1137. [    4.824148]     HOME=/
      
1138. [    4.824150]     TERM=linux
      
1139. [    4.824154] [dhd] dhdpcie_oob_intr_unregister: irq is not registered
      
1140. [    4.824161] [dhd] dhd_dpc_kill: tasklet disabled
      
1141. [    4.824167]     storagemedia=emmc
      
1142. [    4.824170]     storagenode=/mmc@fe2e0000
      
1143. [    4.824172]     overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1
      
1144. [    4.824175]     cgroup_enable=memory
      
1145. [    4.837872] [dhd] dhd_bus_devreset:  WLAN OFF Done
      
1146. [    4.837883] [dhd] wifi_platform_set_power = 0, delay: 0 msec
      
1147. [    4.837889] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
      
1148. [    4.837895] [WLAN_RFKILL]: rockchip_wifi_power: 0
      
1149. [    4.837901] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
      
1150. [    4.837906] wifi power off
      
1151. [    4.860823] usb 4-1: new high-speed USB device number 2 using ehci-platform
      
1152. [    4.880195] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.91
      
1153. [    4.880258] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
      
1154. [    4.880282] usb 1-1: Product: USB2.1 Hub
      
1155. [    4.880304] usb 1-1: Manufacturer: GenesysLogic
      
1156. [    4.920500] hub 1-1:1.0: USB hub found
      
1157. [    4.920754] hub 1-1:1.0: 4 ports detected
      
1158. [    4.944112] [WLAN_RFKILL]: wifi shut off power [GPIO20-0]
      
1159. [    4.944168] [dhd] dhdpcie_pci_probe : the lock is released.
      
1160. [    4.944445] [dhd] _dhd_module_init: Exit err=0
      
1161. [    5.007830] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
      
1162. [    5.011501] usb 4-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
      
1163. [    5.011510] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
      
1164. [    5.011514] usb 4-1: Product: USB 2.0 Hub [MTT]
      
1165. [    5.011809] hub 4-1:1.0: USB hub found
      
1166. [    5.011874] hub 4-1:1.0: 4 ports detected
      
1167. [    5.026907] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.91
      
1168. [    5.026933] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
      
1169. [    5.026942] usb 2-1: Product: USB3.2 Hub
      
1170. [    5.026950] usb 2-1: Manufacturer: GenesysLogic
      
1171. [    5.048296] hub 2-1:1.0: USB hub found
      
1172. [    5.048638] hub 2-1:1.0: 4 ports detected
      
1173. [    5.157658] es8323_line1_line2_line2diff_switch:2
      
1174. [    5.294030] usb 1-1.4: new low-speed USB device number 3 using xhci-hcd
      
1175. [    5.412777] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
      
1176. [    5.412838] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
      
1177. [    5.412866] usb 1-1.4: Product: USB Keyboard
      
1178. [    5.412890] usb 1-1.4: Manufacturer: SEM
      
1179. [    5.501333] input: SEM USB Keyboard as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.11.auto/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:2124.0001/input/input6
      
1180. [    5.558538] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-xhci-hcd.11.auto-1.4/input0
      
1181. [    5.564226] input: SEM USB Keyboard Consumer Control as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.11.auto/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:2124.0002/input/input7
      
1182. [    5.621376] input: SEM USB Keyboard System Control as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.11.auto/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:2124.0002/input/input8
      
1183. [    5.622157] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-xhci-hcd.11.auto-1.4/input1
      
1184. [    6.574090] rk-pcie fe150000.pcie: PCIe Link Fail
      
1185. [    6.574166] rk-pcie fe150000.pcie: failed to initialize host
      
1186. [    6.575250] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply from device tree
      
1187. [    6.575360] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply property in node /power-management@fd8d8000/power-controller failed
      
1188. [    7.032578] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
      
1189. [    7.260192] EXT4-fs (mmcblk1p7): recovery complete
      
1190. [    7.260465] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: (null)
      
1191. [    7.385416] EXT4-fs (mmcblk1p3): recovery complete
      
1192. [    7.385817] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
      
1193. [    7.385866] ext4 filesystem being mounted at /root/boot supports timestamps until 2038 (0x7fffffff)
      
1194. [    7.551884] systemd[1]: Failed to find module 'autofs4'
      
1195. [    7.640590] systemd[1]: systemd 245.4-4ubuntu4.0firefly1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
      
1196. [    7.641103] systemd[1]: Detected architecture arm64.
      
1197. [    7.685183] systemd[1]: Set hostname to <firefly>.
      
1198. [    7.686089] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1199. [    7.686171] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1200. [    7.975145] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
      
1201. [    7.975170] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
      
1202. [    7.976204] systemd[1]: Created slice system-modprobe.slice.
      
1203. [    7.977172] systemd[1]: Created slice system-serial\x2dgetty.slice.
      
1204. [    7.978070] systemd[1]: Created slice User and Session Slice.
      
1205. [    7.978641] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
      
1206. [    7.979413] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
      
1207. [    7.979464] systemd[1]: Reached target User and Group Name Lookups.
      
1208. [    7.979964] systemd[1]: Reached target Remote File Systems.
      
1209. [    7.980490] systemd[1]: Reached target Slices.
      
1210. [    7.980938] systemd[1]: Reached target Swap.
      
1211. [    7.981523] systemd[1]: Listening on Syslog Socket.
      
1212. [    7.982115] systemd[1]: Listening on initctl Compatibility Named Pipe.
      
1213. [    7.994101] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
      
1214. [    7.994306] systemd[1]: Listening on Journal Socket (/dev/log).
      
1215. [    7.994934] systemd[1]: Listening on Journal Socket.
      
1216. [    7.995539] systemd[1]: Listening on udev Control Socket.
      
1217. [    7.996175] systemd[1]: Listening on udev Kernel Socket.
      
1218. [    7.996857] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
      
1219. [    7.998549] systemd[1]: Mounting POSIX Message Queue File System...
      
1220. [    8.000694] systemd[1]: Mounting Kernel Debug File System...
      
1221. [    8.002877] systemd[1]: Mounting Kernel Trace File System...
      
1222. [    8.005722] systemd[1]: Starting Journal Service...
      
1223. [    8.008088] systemd[1]: Starting Set the console keyboard layout...
      
1224. [    8.008826] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
      
1225. [    8.008921] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
      
1226. [    8.010660] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
      
1227. [    8.013540] systemd[1]: Starting Load Kernel Modules...
      
1228. [    8.016073] systemd[1]: Starting Remount Root and Kernel File Systems...
      
1229. [    8.018896] systemd[1]: Starting udev Coldplug all Devices...
      
1230. [    8.022203] systemd[1]: Mounted Kernel Trace File System.
      
1231. [    8.026140] systemd[1]: Mounted POSIX Message Queue File System.
      
1232. [    8.027084] systemd[1]: Mounted Kernel Debug File System.
      
1233. [    8.028575] systemd[1]: Finished Remount Root and Kernel File Systems.
      
1234. [    8.044511] systemd[1]: Finished Load Kernel Modules.
      
1235. [    8.046330] systemd[1]: Mounting FUSE Control File System...
      
1236. [    8.047876] systemd[1]: Mounting Kernel Configuration File System...
      
1237. [    8.049025] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
      
1238. [    8.049095] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
      
1239. [    8.050050] systemd[1]: Starting Load/Save Random Seed...
      
1240. [    8.051423] systemd[1]: Starting Apply Kernel Variables...
      
1241. [    8.052466] systemd[1]: Starting Create System Users...
      
1242. [    8.054325] systemd[1]: Mounted FUSE Control File System.
      
1243. [    8.055040] systemd[1]: Mounted Kernel Configuration File System.
      
1244. [    8.065389] systemd[1]: Finished Create System Users.
      
1245. [    8.068244] systemd[1]: Starting Create Static Device Nodes in /dev...
      
1246. [    8.082044] systemd[1]: Finished Load/Save Random Seed.
      
1247. [    8.100153] systemd[1]: Finished Apply Kernel Variables.
      
1248. [    8.104663] systemd[1]: Finished Create Static Device Nodes in /dev.
      
1249. [    8.105999] systemd[1]: Starting udev Kernel Device Manager...
      
1250. [    8.110106] systemd[1]: Finished Set the console keyboard layout.
      
1251. [    8.110377] systemd[1]: Reached target Local File Systems (Pre).
      
1252. [    8.110829] systemd[1]: Reached target Local File Systems.
      
1253. [    8.111386] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped.
      
1254. [    8.112422] systemd[1]: Starting Set console font and keymap...
      
1255. [    8.113467] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
      
1256. [    8.113623] systemd[1]: Condition check resulted in Load AppArmor profiles managed internally by snapd being skipped.
      
1257. [    8.113677] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
      
1258. [    8.113759] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
      
1259. [    8.126159] systemd[1]: Finished Set console font and keymap.
      
1260. [    8.131842] systemd[1]: plymouth-read-write.service: Succeeded.
      
1261. [    8.132317] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
      
1262. [    8.144023] systemd[1]: Started Journal Service.
      
1263. [    8.161149] systemd-journald[491]: Received client request to flush runtime journal.
      
1264. [    8.165504] systemd-journald[491]: File /var/log/journal/634553a90ac84a93bd8f946cfc7ea9d8/system.journal corrupted or uncleanly shut down, renaming and replacing.
      
1265. [    8.394626] libata version 3.00 loaded.
      
1266. [    8.405125] ahci fe210000.sata: Looking up ahci-supply from device tree
      
1267. [    8.405144] ahci fe210000.sata: Looking up ahci-supply property in node /sata@fe210000 failed
      
1268. [    8.405192] ahci fe210000.sata: supply ahci not found, using dummy regulator
      
1269. [    8.405322] ahci fe210000.sata: Looking up phy-supply from device tree
      
1270. [    8.405331] ahci fe210000.sata: Looking up phy-supply property in node /sata@fe210000 failed
      
1271. [    8.405346] ahci fe210000.sata: supply phy not found, using dummy regulator
      
1272. [    8.405461] ahci fe210000.sata: Looking up target-supply from device tree
      
1273. [    8.405469] ahci fe210000.sata: Looking up target-supply property in node /sata@fe210000 failed
      
1274. [    8.405484] ahci fe210000.sata: supply target not found, using dummy regulator
      
1275. [    8.405589] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
      
1276. [    8.405616] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
      
1277. [    8.405623] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
      
1278. [    8.405635] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
      
1279. [    8.416656] scsi host0: ahci
      
1280. [    8.416782] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 76
      
1281. [    8.538005] xc7160 3-001b: isp chip is xc7160
      
1282. [    8.575192] xc7160 3-001b: isp chip is xc7160
      
1283. [    8.583252] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1284. [    8.583681] phy_rtl8211f_led_fixup in
      
1285. [    8.617572] phy_rtl8211f_led_fixup in
      
1286. [    8.674022] rk_gmac-dwmac fe1b0000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
      
1287. [    8.675539] dwmac4: Master AXI performs any burst length
      
1288. [    8.675551] rk_gmac-dwmac fe1b0000.ethernet eth0: No Safety Features support found
      
1289. [    8.675560] rk_gmac-dwmac fe1b0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
      
1290. [    8.675731] rk_gmac-dwmac fe1b0000.ethernet eth0: registered PTP clock
      
1291. [    8.675864] rk_gmac-dwmac fe1b0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
      
1292. [    8.701093] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1293. [    8.701201] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1294. [    8.701380] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1295. [    8.701701] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1296. [    8.706428] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1297. [    8.706706] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1298. [    8.707036] [BT_RFKILL]: bt shut off power
      
1299. [    8.707304] file system registered
      
1300. [    8.823689] read descriptors
      
1301. [    8.823748] read strings
      
1302. [    9.184857] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1303. [    9.185195] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1304. [    9.185696] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1305. [    9.185817] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1306. [    9.315999] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1307. [    9.322526] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1308. [    9.322563] phy_rtl8211f_led_fixup in
      
1309. [    9.344477] phy_rtl8211f_led_fixup in
      
1310. [    9.397374] rk_gmac-dwmac fe1c0000.ethernet eth1: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
      
1311. [    9.406570] dwmac4: Master AXI performs any burst length
      
1312. [    9.406586] rk_gmac-dwmac fe1c0000.ethernet eth1: No Safety Features support found
      
1313. [    9.406595] rk_gmac-dwmac fe1c0000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
      
1314. [    9.406714] rk_gmac-dwmac fe1c0000.ethernet eth1: registered PTP clock
      
1315. [    9.406895] rk_gmac-dwmac fe1c0000.ethernet eth1: configuring for phy/rgmii-rxid link mode
      
1316. [    9.431325] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1317. [    9.437657] [dhd] Dongle Host Driver, version 101.10.361.11 (wlan=r892223-20210630-1)
      
1318.                drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Apr  1 2022 at 10:26:45
      
1319. 
      
1320. [    9.437671] [dhd] dhd_open : no mutex held. set lock
      
1321. [    9.437685] [dhd] dhd_open: ######### called for ifidx=0 #########
      
1322. [    9.437704] [dhd] wifi_platform_set_power = 1, delay: 200 msec
      
1323. [    9.437713] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
      
1324. [    9.437723] [WLAN_RFKILL]: rockchip_wifi_power: 1
      
1325. [    9.437733] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
      
1326. [    9.547407] [WLAN_RFKILL]: wifi turn on power [GPIO20-1]
      
1327. [    9.854109] [dhd] dhd_bus_devreset: == Power ON ==
      
1328. [    9.854130] [dhd] dhd_bus_devreset: dhdpcie_bus_start_host_dev OK
      
1329. [    9.854772] [dhd] Disable CTO
      
1330. [    9.855794] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
      
1331. [    9.855813] [dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x400000
      
1332. [    9.855850] [dhd] dhdpcie_request_irq: INTx enabled
      
1333. [    9.855911] [dhd] dhd_bus_download_firmware: firmware path=/vendor/etc/firmware/fw_bcmdhd.bin, nvram path=/vendor/etc/firmware/nvram.txt
      
1334. [    9.855933] [dhd] dhdpcie_dump_resource: BAR0(VA): 0x0000000000000000, BAR0(PA): 0x00000000f2200000, SIZE: 32768
      
1335. [    9.855949] [dhd] dhdpcie_dump_resource: BAR1(VA): 0x0000000000000000, BAR1(PA): 0x00000000f2400000, SIZE: 4194304
      
1336. [    9.857681] [dhd] dhd_os_open_image1: /vendor/etc/firmware/config.txt (205 bytes) open success
      
1337. [    9.858124] [dhd] dhd_conf_read_country : regrev = 0
      
1338. [    9.858222] [dhd] dhd_conf_read_others : srl = 15
      
1339. [    9.858251] [dhd] dhd_conf_read_others : lrl = 15
      
1340. [    9.858303] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/firmware/fw_bcm43752a2_pcie_ag.bin
      
1341. [    9.858326] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/firmware/nvram_AP6275P.txt
      
1342. [    9.858347] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/firmware/clm_bcm43752a2_pcie_ag.blob
      
1343. [    9.858408] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/firmware/config.txt
      
1344. [    9.858527] [dhd] dhdpcie_download_code_file: dhd_tcm_test_enable 0
      
1345. [    9.858541] [dhd] dhdpcie_download_code_file: download firmware /vendor/etc/firmware/fw_bcm43752a2_pcie_ag.bin
      
1346. [    9.858707] [dhd] dhd_os_open_image1: /vendor/etc/firmware/fw_bcm43752a2_pcie_ag.bin (857142 bytes) open success
      
1347. [    9.930880] android_work: did not send uevent (0 0 0000000000000000)
      
1348. [    9.946634] [dhd] dhd_os_open_image1: /vendor/etc/firmware/nvram_AP6275P.txt (7335 bytes) open success
      
1349. [    9.947325] [dhd] dhdpcie_download_nvram: dhd_get_download_buffer len 7335
      
1350. [    9.947331] [dhd] NVRAM version:  AP6275P_NVRAM_V1.1_20200702
      
1351. [    9.947417] [dhd] dhdpcie_download_nvram: process_nvram_vars len 5860
      
1352. [    9.965668] [dhd] dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
      
1353. [    9.965879] [dhd] dhd_bus_aer_config: Configure AER registers for EP
      
1354. [    9.965907] [dhd] dhd_bus_aer_config: Configure AER registers for RC
      
1355. [   10.045778] [dhd] ### Total time ARM OOR to Readshared pass took 79951 usec ###
      
1356. [   10.045785] [dhd] dhdpcie_readshared: PCIe shared addr (0x001f8974) read took 80000 usec before dongle is ready
      
1357. [   10.046209] [dhd] H2D DMA WR INDX : array size 172 = 4 * 43
      
1358. [   10.046217] [dhd] D2H DMA RD INDX : array size 16 = 4 * 4
      
1359. [   10.046225] [dhd] D2H DMA WR INDX : array size 16 = 4 * 4
      
1360. [   10.046233] [dhd] H2D DMA RD INDX : array size 172 = 4 * 43
      
1361. [   10.046237] [dhd] dhdpcie_readshared: max H2D queues 40
      
1362. [   10.046239] [dhd] FW supports debug buf dest ? N
      
1363. [   10.046271] [dhd] dhd_bus_init: Enabling bus->intr_enabled
      
1364. [   10.046276] [dhd] dhdpcie_oob_intr_register OOB irq=147 flags=0x1
      
1365. [   10.046312] [dhd] dhdpcie_oob_intr_register: enable_irq_wake
      
1366. [   10.046316] [dhd] dhd_bus_start: Initializing 43 h2drings
      
1367. [   10.046348] [dhd] dhd_prot_init:3925: h2d_max_txpost = 512
      
1368. [   10.046354] [dhd] dhd_prot_init:3940: MAX_RXBUFPOST = 511
      
1369. [   10.046357] [dhd] ENABLING DW:0
      
1370. [   10.046360] [dhd] IDMA inited
      
1371. [   10.046362] [dhd] IFRM not enabled in FW !!
      
1372. [   10.046364] [dhd] DAR not enabled in FW !!
      
1373. [   10.046366] [dhd] Enable hostcap: EXTD TXS in txcpl
      
1374. [   10.046391] [dhd] dhd_prot_d2h_sync_init(): D2H sync mechanism is NONE
      
1375. [   10.046406] [dhd] dhd_bus_hostready : Read PCICMD Reg: 0x00100006
      
1376. [   10.046421] [dhd] dhd_bus_dump_dar_registers: dar_clk_ctrl(0xa08:0x10b0040) dar_pwr_ctrl(0xa0c:0x30000) dar_intstat(0xa10:0x0)
      
1377. [   10.046425] [dhd] dhd_bus_dump_dar_registers: dar_errlog(0xa60:0x0) dar_erraddr(0xa64:0x0) dar_pcie_mbint(0xa68:0x0)
      
1378. [   10.046431] [dhd] dhd_bus_hostready: Ring Hostready:1
      
1379. [   10.046435] [dhd] Attach flowrings pool for 40 rings
      
1380. [   10.073041] [dhd] iDMA enabled PCIEControl = 00000001
      
1381. [   10.075454] [dhd] dhd_send_d2h_ringcreate ringid: 3 idx: 46 max_h2d: 43
      
1382. [   10.075639] [dhd] dhd_prot_process_d2h_ring_create_complete ring create Response status = 0 ring 3, id 0xfffc
      
1383. [   10.075729] [dhd] info buffer post after ring create
      
1384. [   10.077475] [dhd] wlc_ver_major 12, wlc_ver_minor 1
      
1385. [   10.077485] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
      
1386. [   10.078025] [dhd] dhd_sync_with_dongle: GET_REVINFO device 0x449d, vendor 0x14e4, chipnum 0xaae8
      
1387. [   10.078554] [dhd] dhd_sync_with_dongle: RxBuf Post : 2048
      
1388. [   10.082354] [dhd] dhd_preinit_ioctls: preinit_status IOVAR not supported, use legacy preinit
      
1389. [   10.082368] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 3
      
1390. [   10.083304] [dhd] dhd_legacy_preinit_ioctls: hostwake_oob enabled
      
1391. [   10.084601] [dhd] dhd_legacy_preinit_ioctls: use firmware generated mac_address 10:2c:6b:fc:f6:a8
      
1392. [   10.084782] [dhd] dhd_os_open_image1: /vendor/etc/firmware/clm_bcm43752a2_pcie_ag.blob (29225 bytes) open success
      
1393. [   10.086107] [dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data -----
      
1394. [   10.117791] [dhd] dhd_check_current_clm_data: ----- This FW is included CLM data -----
      
1395. [   10.121167] [dhd] Firmware up: op_mode=0x0005, MAC=10:2c:6b:fc:f6:a8
      
1396. [   10.129711] [dhd] dhd_legacy_preinit_ioctls: event_log_max_sets: 26 ret: 0
      
1397. [   10.135680] [dhd] arp_enable:1 arp_ol:0
      
1398. [   10.141808] [dhd]   Driver: 101.10.361.11 (wlan=r892223-20210630-1)
      
1399.                  Firmware: wl0: Aug  3 2021 17:38:16 version 18.35.387.23.57 (gdc961cae) FWID 01-ea656a70
      
1400.                  CLM: 9.9.8_SS (2021-05-10 15:05:58)
      
1401. [   10.142391] [dhd] dhd_pno_init: Support Android Location Service
      
1402. [   10.142405] [dhd] dhd_rtt_init ENTRY
      
1403. [   10.143068] [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
      
1404. [   10.143082] [dhd] dhd_rtt_init : FTM is not supported
      
1405. [   10.143092] [dhd] dhd_rtt_init EXIT, err = 0
      
1406. [   10.152606] [dhd] [INIT] logset:8 is preserve/chatty
      
1407. [   10.154168] [dhd] [INIT] logset:10 is preserve/chatty
      
1408. [   10.165562] [dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported
      
1409. [   10.194624] [dhd] dhd_conf_set_country : set country CN, revision 0
      
1410. [   10.194649] [dhd] dhd_rx_frame: net device is NOT registered. drop event packet
      
1411. [   10.199333] [dhd] dhd_conf_set_country : Country code: CN (CN/0)
      
1412. [   10.207767] [dhd] dhd_bus_devreset: WLAN Power On Done
      
1413. [   10.232907] [dhd] dhd_rx_frame: net device is NOT registered. drop event packet
      
1414. [   10.262465] [dhd] dhd_open : the lock is released.
      
1415. [   10.263879] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1416. [   10.450261] [dhd] P2P interface registered
      
1417. [   10.450269] [dhd] wl_cfgp2p_add_p2p_disc_if: wdev: 00000000c412b110, wdev->net: 0000000000000000
      
1418. [   10.524527] ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
      
1419. [   10.554104] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1420. [   10.554327] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1421. [   10.554505] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1422. [   10.979670] systemd-journald[491]: File /var/log/journal/634553a90ac84a93bd8f946cfc7ea9d8/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
      
1423. [   11.452591] rk_gmac-dwmac fe1c0000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx
      
1424. [   11.452617] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
      
1425. [   11.452727] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1426. [   11.454130] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1427. [   11.462792] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1428. [   11.471057] xc7160 3-001b: isp chip is xc7160
      
1429. [   11.510696] xc7160 3-001b: isp chip is xc7160
      
1430. [   11.547968] xc7160 3-001b: isp chip is xc7160
      
1431. [   11.581152] xc7160 3-001b: isp chip is xc7160
      
1432. [   11.624672] xc7160 3-001b: isp chip is xc7160
      
1433. [   11.664441] xc7160 3-001b: isp chip is xc7160
      
1434. [   11.702334] xc7160 3-001b: isp chip is xc7160
      
1435. [   11.738162] xc7160 3-001b: isp chip is xc7160
      
1436. [   12.965687] rockchip-i2s-tdm fddf8000.i2s: reset rx
      
1437. [   13.631617] xc7160 3-001b: isp chip is xc7160
      
1438. [   13.691666] xc7160 3-001b: isp chip is xc7160
      
1439. [   13.744763] xc7160 3-001b: isp chip is xc7160
      
1440. [   13.792324] xc7160 3-001b: isp chip is xc7160
      
1441. [   13.837840] xc7160 3-001b: isp chip is xc7160
      
1442. [   13.869729] rockchip-i2s-tdm fddf8000.i2s: reset rx
      
1443. [   13.871781] xc7160 3-001b: isp chip is xc7160
      
1444. [   13.890693] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
      
1445. [   13.891136] ata1.15: Port Multiplier 1.2, 0x197b:0x5755 r0, 5 ports, feat 0x5/0xf
      
1446. [   13.899022] ahci fe210000.sata: FBS is enabled
      
1447. [   13.899475] ata1.00: hard resetting link
      
1448. [   13.914477] xc7160 3-001b: isp chip is xc7160
      
1449. [   13.947785] xc7160 3-001b: isp chip is xc7160
      
1450. [   14.215713] ata1.00: SATA link down (SStatus 0 SControl 330)
      
1451. [   14.215882] ata1.01: hard resetting link
      
1452. [   14.437446] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
      
1453. [   14.532734] ata1.01: SATA link down (SStatus 0 SControl 330)
      
1454. [   14.532859] ata1.02: hard resetting link
      
1455. [   14.768602] rockchip-i2s-tdm fddf8000.i2s: reset rx
      
1456. [   14.845299] ata1.02: SATA link down (SStatus 0 SControl 330)
      
1457. [   14.845521] ata1.03: hard resetting link
      
1458. [   15.158372] ata1.03: SATA link down (SStatus 0 SControl 330)
      
1459. [   15.158547] ata1.04: hard resetting link
      
1460. [   15.472651] ata1.04: SATA link down (SStatus 0 SControl 330)
      
1461. [   15.472788] ata1: EH complete
      
1462. [   35.770731] vcc3v3_pcie30: disabling
      
1463. [   35.770782] vbus5v0_typec_pwr_en: disabling
      
1464. [   41.616313] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1465. [   41.616929] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      
1466. [   41.617613] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
      

复制代码

板蓝根

一切正常，XDG_RUNTIME_DIR=/run/user/1000 gst-launch-1.0 v4l2src device=/dev/video0 !  queue !video/x-raw,format=NV12,width=1920,height=1080, framerate=30/1 ! videoconvert ! glimagesink 试一下

wyglily

root@firefly:/home/firefly#
root@firefly:/home/firefly# XDG_RUNTIME_DIR=/run/user/1000 gst-launch-1.0 v4l2src device=/dev/video0 !  queue ! video/x-raw,format=NV12,width=1920,height=1080, framerate=30/1 ! videoconvert ! glimagesink
Setting pipeline to PAUSED ...
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
ERROR: Pipeline doesn't want to pause.
Got context from element 'sink': gst.gl.GLDisplay=context, gst.gl.GLDisplay=(GstGLDisplay)"\(GstGLDisplayWayland\)\ gldisplaywayland0";
ERROR: from element /GstPipeline:pipeline0/GstGLImageSinkBin:glimagesinkbin0/GstGLImageSink:sink: Failed to bind OpenGL API: EGL_BAD_PARAMETER
Additional debug info:
gstglimagesink.c(1010): _ensure_gl_setup (): /GstPipeline:pipeline0/GstGLImageSinkBin:glimagesinkbin0/GstGLImageSink:sink
Setting pipeline to NULL ...
Freeing pipeline ...
root@firefly:/home/firefly#

wyglily

4月6的android image 可以识别摄像头，ubuntu 的img 就是无法成功，你能不否把你们验证过的imag给我们一份我试下。同时再问下怎么用ffmpeg 测试这个摄像头，命令行参数如何下？谢谢!

wyglily

板蓝根 发表于 2022-4-19 09:25
一切正常，XDG_RUNTIME_DIR=/run/user/1000 gst-launch-1.0 v4l2src device=/dev/video0 !  queue !video/x ...

具体是什么原因，你们查到了吗？这可是你们官方image说的是支持的，实际上却不能在ubuntu 下工作。

板蓝根

ITX-3588J_Ubuntu20.04-Gnome-r211_v0.0.1c_220402.img 我们验证的就是这个 image，已经有几个客户在用了同样的方法点亮了，请确认客户自己有没有修改过环境。另外 ffmpeg 不支持摄像头抓取，目前支持 gstreamer 或者直接用 v4l2 接口抓图

wyglily

原有的是android,没有改过环境,我们直接把ITX-3588J_Ubuntu20.04-Gnome-r211_v0.0.1c_220402.img用v2.84烧录工具直接升级。

wyglily

v4l2-ctl --verbose -d /dev/video0 --set-fmt-video=width=1920,height=1080,pixelformat='NV12' --stream-mmap=4 --set-selection=target=crop,flags=0,top=0,left=0,width=1920,height=1080 --stream-to=/userdata/out.yuv


cap dqbuf: 2 seq:   1588 bytesused: 3110400 ts: 296.503253 delta: 33.329 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 3 seq:   1589 bytesused: 3110400 ts: 296.536591 delta: 33.338 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 1 seq:   1590 bytesused: 3110400 ts: 296.569923 delta: 33.332 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 0 seq:   1591 bytesused: 3110400 ts: 296.603248 delta: 33.325 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 2 seq:   1592 bytesused: 3110400 ts: 296.636581 delta: 33.333 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 3 seq:   1593 bytesused: 3110400 ts: 296.669956 delta: 33.375 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 1 seq:   1594 bytesused: 3110400 ts: 296.703244 delta: 33.288 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 0 seq:   1595 bytesused: 3110400 ts: 296.736577 delta: 33.333 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 2 seq:   1596 bytesused: 3110400 ts: 296.769911 delta: 33.334 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 3 seq:   1597 bytesused: 3110400 ts: 296.803244 delta: 33.333 ms fps: 29.88 (ts-monotonic, ts-src-eof)

root@firefly:/userdata# ls out.yuv  -l
-rw-r--r-- 1 root root 0 Apr 20 09:55 out.yuv
root@firefly:/userdata#

out.yuv size is 0

板蓝根

ubuntu20.04 的v4l2-ctl 不能用于抓图，如果需要用 v4l2-ctl 只能回退的 v4l2-ctl 1.16.5 的版本，但是看帧率都出来了应该 gstreamer 可以抓才对