双屏显示，副屏显示不正常怎么处理

xi0325

双屏显示，开机logo，主屏和副屏都显示正常，进入开机动画后，主屏显示正常，副屏有亮屏，但显示不正常。交换主副屏，发现现在跟着副屏走。
现在如图所示：
打印信息如下：
DDR Version 1.00 20160530
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT


U-Boot 2014.10-RK3288-10-gc28aaca-dirty (May 04 2017 - 04:08:32)

CPU: rk3288
cpu version = 0
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 20
SdmmcInit = 2 0
storage init OK!
Using default environment

GetParam
Load FDT from resource image.
power key: bank-0 pin-5
pmic:act8846
can't find dts node for pwm1
DCDC vdd_logic has been used, pwm regulator not init it.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2017-05-04#2.30
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [0]
no fuel gauge found
Hit any key to stop autoboot:  0
load fdt from resouce.
Secure Boot state: 0
kernel   @ 0x02000000 (0x00697490)
ramdisk  @ 0x05bf0000 (0x00138ec8)
bootrk: do_bootm_linux...
   Loading Device Tree to 05600000, end 0561b7b0 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

<hit enter to activate fiq debugger>
[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (xxl@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #38 SMP PREEMPT Thu May 25 08:30:11 EDT 2017
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(drm): base(0) size(0) align(0)
[    0.000000] ion heap(cma): base(0) size(28000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 640 MiB at 58000000
[    0.000000] ion_reserve: cma reserved base 58000000 size 671088640
[    0.000000] cma: CMA: reserved 16 MiB at 1f000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1eee000 s13376 r8192 d15296 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523264
[    0.000000] Kernel command line: vmalloc=496M console=ttyFIQ0 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00300000@0x00092000(system),0x00008000@0x00392000(metadata),0x00002000@0x0039A000(baseparamer),0x00200000@0x0039C000(userdata),0x00020000@0x0059C000(radical_update),-@0x005BC000(user) storagemedia=emmc loader.timestamp=2017-05-04_04:08:32
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 1387700k/1387700k available, 709452k reserved, 917504K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0b878a0   (11775 kB)
[    0.000000]       .init : 0xc0b88000 - 0xc0be3440   ( 366 kB)
[    0.000000]       .data : 0xc0be4000 - 0xc0d73d40   (1600 kB)
[    0.000000]        .bss : 0xc0d73d40 - 0xc0e949bc   (1156 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start!
[    0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
[    0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 28
[    0.000000] rk3288 set GPLL BW 20 for HDMI!
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 3
[    0.000000] channel:0, lkg:8
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] channel:0, lkg:8
[    0.000000] channel:1, lkg:8
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.352084] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.352100] pid_max: default: 32768 minimum: 301
[    0.352212] Security Framework initialized
[    0.352228] SELinux:  Initializing.
[    0.352300] Mount-cache hash table entries: 512
[    0.352942] Initializing cgroup subsys debug
[    0.352957] Initializing cgroup subsys memory
[    0.352983] Initializing cgroup subsys freezer
[    0.353012] CPU: Testing write buffer coherency: ok
[    0.353323] /cpus/cpu@0 missing clock-frequency property
[    0.353336] /cpus/cpu@1 missing clock-frequency property
[    0.353346] /cpus/cpu@2 missing clock-frequency property
[    0.353355] /cpus/cpu@3 missing clock-frequency property
[    0.353402] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.353452] Setting up static identity map for 0xc08592b8 - 0xc0859310
[    0.356423] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x1709 (version 3.1)
[    0.430247] CPU1: Booted secondary processor
[    0.430280] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.449924] CPU2: Booted secondary processor
[    0.449947] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.469631] CPU3: Booted secondary processor
[    0.469656] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.469757] Brought up 4 CPUs
[    0.469785] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.469794] CPU: All CPU(s) started in SVC mode.
[    0.470525] devtmpfs: initialized
[    0.474829] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.475912] pinctrl core: initialized pinctrl subsystem
[    0.476162] regulator-dummy: no parameters
[    0.500470] NET: Registered protocol family 16
[    0.502236] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.502560] ion_snapshot: 0x1ea90000 map to 0xe0907000 and copy to 0xc0e6fecc (version 0.1)
[    0.502822] Registered FIQ tty driver
[    0.504107] console [ttyFIQ0] enabled
[    0.504351] Registered fiq debugger ttyFIQ0
[    0.504926] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.504951] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[    0.504970] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.504990] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.505094] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.505165] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.505229] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.505295] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.505359] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.505424] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[    0.505488] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.505554] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.505628] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.505696] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.505712] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.505727] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.505740] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.506353] rockchip_interrupts_register:bank_num=7
[    0.508264] of_get_gpio_init_config:gpio[0] = 6, value = 0
[    0.508323] rockchip_pinctrl_probe:init ok
[    0.515042] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.515131] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.515147] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.515322] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.515394] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.515410] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.515569] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.515645] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.515661] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.515832] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.515905] rk_iommu ff940300.vopl_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.515921] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.516091] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.516169] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.516185] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.516354] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.516427] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.516443] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.516611] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.516691] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.516706] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.518364] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.518381] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.519008] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
[    0.519036] DDR DEBUG: version 1.00 20150126
[    0.519066] DDR DEBUG: Channel a:
[    0.519077] DDR DEBUG: DDR3 Device
[    0.519092] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.519104] DDR DEBUG: Channel b:
[    0.519112] DDR DEBUG: DDR3 Device
[    0.519126] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.519137] DDR DEBUG: addr=0xd7d000
[    0.519148] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.519160] DDR DEBUG: socAddr[0]=0xd7d000, socAddr[1]=0xd7d100
[    0.519171] DDR DEBUG: chAddr[0]=0xd7d000, chAddr[1]=0xd7d000
[    0.519185] DDR DEBUG: dtar[0]=0x501af000, dtar[1]=0x501af000
[    0.519242] DDR DEBUG: init success!!! freq=200MHz
[    0.519252] DDR DEBUG: Channel a:
[    0.519266] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.519282] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.519298] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.519314] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.519328] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.519340] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.519351] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.519360] DDR DEBUG: Channel b:
[    0.519373] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.519388] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.519404] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.519420] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.519434] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.519445] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.519456] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.543875] bio: create slab <bio-0> at 0
[    0.544410] Rockchip hdmi driver version 2.0
.
[    0.545585] SCSI subsystem initialized
[    0.545746] usbcore: registered new interface driver usbfs
[    0.545793] usbcore: registered new interface driver hub
[    0.545888] usbcore: registered new device driver usb
[    0.548636] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.549302] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.549757] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.550208] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.550332] media: Linux media interface: v0.10
[    0.550377] Linux video capture interface: v2.00
[    0.550496] pps_core: LinuxPPS API ver. 1 registered
[    0.550509] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.550533] PTP clock support registered
[    0.550589] i2c-core: driver [bq24296] using legacy suspend method
[    0.550601] i2c-core: driver [bq24296] using legacy resume method
[    0.551273] ion_drm_heap_create: 0@0
[    0.551405] Rockchip ion module is successfully loaded (v1.1)
[    0.551577] Advanced Linux Sound Architecture Driver Initialized.
[    0.551977] Bluetooth: Core ver 2.16
[    0.552016] NET: Registered protocol family 31
[    0.552028] Bluetooth: HCI device and connection manager initialized
[    0.552046] Bluetooth: HCI socket layer initialized
[    0.552062] Bluetooth: L2CAP socket layer initialized
[    0.552092] Bluetooth: SCO socket layer initialized
[    0.552346] cfg80211: Calling CRDA to update world regulatory domain
[    0.553429] act8846_i2c_probe,line=881
[    0.554453] act8846_parse_dt,line=744
[    0.554872] act8846_i2c_probe: act8846_pmic_hold=1
[    0.556966] act_dcdc1: 1200 mV
[    0.559945] vccio: 3300 mV
[    0.561827] vdd_logic: 700 <--> 1500 mV at 1125 mV
[    0.564779] act_dcdc4: 2000 mV
[    0.566039] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[    0.568356] act_ldo2: 1000 mV
[    0.570685] act_ldo3: 3300 mV
[    0.573008] act_ldo4: 3300 mV
[    0.575321] act_ldo5: 3300 mV
[    0.577625] act_ldo6: 1000 mV
[    0.579958] vcc_18: 1800 mV
[    0.582270] act_ldo8: 1800 mV
[    0.587113] vdd_arm: 712 <--> 1500 mV at 900 mV
[    0.591817] vdd_gpu: 712 <--> 1500 mV at 900 mV
[    0.592551] rk808_i2c_probe,line=1355
[    0.593888] The device is not rk808 -11
[    0.593977] rk808: probe of 0-001b failed with error -11
[    0.594050] i2c-core: driver [rk816] using legacy suspend method
[    0.594063] i2c-core: driver [rk816] using legacy resume method
[    0.594107] i2c-core: driver [rk818] using legacy suspend method
[    0.594119] i2c-core: driver [rk818] using legacy resume method
[    0.595796] Switching to clocksource arch_sys_counter
[    0.619619] rga: Module initialized.
[    0.620342] rga2 ff920000.rga: rga ion client create success!
[    0.620545] rga: Driver loaded succesfully
[    0.620784] rk-fb rockchip-fb: rk fb ion client create success!
[    0.620799] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.621062] prmry screen timing parse success
[    0.621126] prmry screen power ctrl parse success
[    0.621195] extend screen timing parse success
[    0.621235] rk-screen rk_screen.9: request lcd_en gpio fail:-16
[    0.621265] extend screen power ctrl parse success
[    0.621278] rk-screen rk_screen.9: rockchip screen probe success
[    0.621439] Use LVDS as prmry screen
[    0.621525] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[    0.621886] Use EDP as extend screen
[    0.622016] rk32-edp rk32-edp: failed to get reset
[    0.622032] rk32-edp rk32-edp: failed to get reset
[    0.622754] rk32-edp rk32-edp: rk32 edp driver probe success
[    0.622939] rk32-dsi
[    0.623057] dsi->host.irq =51
[    0.623077] mipi dsi chip is not found, read id:ffffffff, but 3133302a is correct
[    0.623093] rk32-mipi ff960000.mipi: rk mipi_dsi probe fail!
[    0.623108] rk32-mipi ff960000.mipi: rockchip mipi_dsi v1.1 2014-06-17
[    0.623140] rk32-mipi: probe of ff960000.mipi failed with error -1
[    0.623875] graphics fb0: rockchip framebuffer registerd:fb0
[    0.624200] graphics fb1: rockchip framebuffer registerd:fb1
[    0.624369] graphics fb2: rockchip framebuffer registerd:fb2
[    0.624541] graphics fb3: rockchip framebuffer registerd:fb3
[    0.644472] @@@@@@lt8911_probe()
[    0.644525] LT8911 1-0029: edp lt8911 probe ok
[    0.647417] rk_battery_charger_detect_cb , battery_charger_detect 1
[    0.743947] rk3288-lcdc lcdc0: lcdc0: dclk:72000000>>fps:57
[    0.743975] rk3288-lcdc lcdc0: wakeup from standby!
[    0.762423] alloc_buffer:ion_phy_addr=0x58000000
[    0.769228] fb0:phy:58000000>>vir:e0991000>>len:0xd00000
[    0.769657] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
[    0.770067] graphics fb4: rockchip framebuffer registerd:fb4
[    0.770393] graphics fb5: rockchip framebuffer registerd:fb5
[    0.770566] graphics fb6: rockchip framebuffer registerd:fb6
[    0.770741] graphics fb7: rockchip framebuffer registerd:fb7
[    0.790654] Error: Driver 'LT8911' is already registered, aborting...
[    0.889171] rk3288-lcdc lcdc1: lcdc1: dclk:72000000>>fps:57
[    0.889386] rk32-edp rk32-edp: edp pll locked
[    0.890022] rk32-edp rk32-edp: max link rate:2.70Gps max number of lanes:1
[    0.893007] rk32-edp rk32-edp: link training success.
[    0.948254] rk3288-lcdc lcdc1: wakeup from standby!
[    0.948270] fb4:phy:58000000>>vir:e0991000>>len:0xd00000
[    0.948293] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
[    0.949165] rockchip_set_mux:warning ignore bank num 15
[    0.949311] rockchip_set_mux:warning ignore bank num 15
[    0.949431] rockchip_set_mux:warning ignore bank num 15
[    0.949549] rockchip_set_mux:warning ignore bank num 15
[    0.949672] rockchip_set_mux:warning ignore bank num 15
[    0.949789] rockchip_set_mux:warning ignore bank num 15
[    0.950367] rockchip_set_mux:warning ignore bank num 15
[    0.950528] rockchip_set_mux:warning ignore bank num 15
[    0.951100] rockchip_set_mux:warning ignore bank num 15
[    0.951248] rockchip_set_mux:warning ignore bank num 15
[    0.951799] rockchip_set_mux:warning ignore bank num 15
[    0.951946] rockchip_set_mux:warning ignore bank num 15
[    0.952508] rockchip_set_mux:warning ignore bank num 15
[    0.952668] rockchip_set_mux:warning ignore bank num 15
[    0.954132] NET: Registered protocol family 2
[    0.954830] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.954914] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.954990] TCP: Hash tables configured (established 4096 bind 4096)
[    0.955055] TCP: reno registered
[    0.955072] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.955099] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.955296] NET: Registered protocol family 1
[    0.956051] Unpacking initramfs...
[    1.023433] Freeing initrd memory: 1248K (c5bf0000 - c5d28000)
[    1.024131] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    1.024694] vcodec_service: probe device ff9a0000.vpu_service
[    1.024898] vcodec_service: No reset resource define
[    1.025099] vcodec_service: ff9a0000.vpu_service: power on
[    1.025197] vcodec_service: probe device ff9a0000.vpu_service
[    1.025214] vcodec_service: checking hw id 4831
[    1.025661] vcodec_service: ff9a0000.vpu_service: power off...
[    1.025705] vcodec_service: done
[    1.025715] vcodec_service: init success
[    1.025777] vcodec_service: probe device ff9c0000.hevc_service
[    1.026110] vcodec_service: ff9c0000.hevc_service: power on
[    1.026173] vcodec_service: probe device ff9c0000.hevc_service
[    1.026190] vcodec_service: checking hw id 6867
[    1.026468] vcodec_service: ff9c0000.hevc_service: power off...
[    1.026512] vcodec_service: done
[    1.026522] vcodec_service: init success
[    1.026662] rknandbase v1.0 2014-03-31
[    1.026798] rknand: probe of ff400000.nandc failed with error -1
[    1.026917] rknand_driver:ret = 0
[    1.028149] audit: initializing netlink socket (disabled)
[    1.028197] type=2000 audit(0.670:1): initialized
[    1.029124] bounce pool size: 64 pages
[    1.033667] fuse init (API version 7.22)
[    1.034062] msgmni has been set to 952
[    1.035980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.036001] io scheduler noop registered
[    1.036013] io scheduler deadline registered
[    1.036105] io scheduler cfq registered (default)
[    1.037901] IEP Driver loaded succesfully
[    1.037997] Module initialized.
[    1.038997] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.039018] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    1.040427] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.040448] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.040731] pwm-voltage-regulator pwm_regulator.24: unable to request PWM, trying legacy API
[    1.040751] pwm-voltage-regulator pwm_regulator.24: unable to request legacy PWM
[    1.040763] pwm_regulator_probe:error
[    1.040787] pwm-voltage-regulator: probe of pwm_regulator.24 failed with error -16
[    1.040985] rk_serial.c v1.8 2014-03-04
[    1.041219] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    1.041396] serial ff180000.serial: membase e16b2000
[    1.041557] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 88) is a rk29_serial.1
[    1.041725] serial ff190000.serial: membase e16c4000
[    1.041877] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 90) is a rk29_serial.3
[    1.042044] serial ff1b0000.serial: membase e16c6000
[    1.042194] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 91) is a rk29_serial.4
[    1.042357] serial ff1c0000.serial: membase e16ce000
[    1.045118] loop: module loaded
[    1.045503] zram: Created 1 device(s) ...
[    1.045580] i2c-core: driver [mpu6050B1] using legacy suspend method
[    1.045593] i2c-core: driver [mpu6050B1] using legacy resume method
[    1.045610] mpu_init: Probe name mpu6050B1
[    1.045766] ak8963_mod_init: Probe name ak8963_mod
[    1.046471] SCSI Media Changer driver v0.25
[    1.046790] tun: Universal TUN/TAP device driver, 1.6
[    1.046804] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.046934] vmac_init.
[    1.047520] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    1.047537] stmmac_probe_config_dt: clock input/output? (input).
[    1.047551] stmmac_probe_config_dt: TX delay(0x30).
[    1.047563] stmmac_probe_config_dt: RX delay(0x20).
[    1.047618] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    1.047629] stmmc_pltfr_init:
[    1.047638] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[    1.047695] stmmc_pltfr_init: init for RMII
[    1.048150] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.048161]  Normal descriptors
[    1.048170]  Ring mode enabled
[    1.048180]  DMA HW capability register supported
[    1.048192]  RX Checksum Offload Engine supported (type 2)
[    1.048202]  TX Checksum insertion supported
[    1.048212]  Wake-Up On Lan supported
[    1.048252]  Enable RX Mitigation via HW Watchdog Timer
[    1.048756] PPP generic driver version 2.4.2
[    1.048920] PPP BSD Compression module registered
[    1.048934] PPP Deflate Compression module registered
[    1.048956] PPP MPPE Compression module registered
[    1.048970] NET: Registered protocol family 24
[    1.049006] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    1.049020] CSLIP: code copyright 1989 Regents of the University of California.
[    1.049033] Rockchip WiFi SYS interface (V1.00) ...
[    1.049067] esp_mem_init enter date May 20 2017 00:25:41
[    1.049079] esp_mem_init VERSION [V2.5]
[    1.049122] esp_mem_init complete
[    1.049210] usbcore: registered new interface driver catc
[    1.049250] usbcore: registered new interface driver kaweth
[    1.049264] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.049302] usbcore: registered new interface driver pegasus
[    1.049339] usbcore: registered new interface driver rtl8150
[    1.049381] usbcore: registered new interface driver r8152
[    1.049394] hso: drivers/net/usb/hso.c: Option Wireless
[    1.049465] usbcore: registered new interface driver hso
[    1.049508] usbcore: registered new interface driver asix
[    1.049546] usbcore: registered new interface driver ax88179_178a
[    1.049586] usbcore: registered new interface driver cdc_ether
[    1.049623] usbcore: registered new interface driver cdc_eem
[    1.049665] usbcore: registered new interface driver dm9601
[    1.049703] usbcore: registered new interface driver dm9620
[    1.049750] usbcore: registered new interface driver smsc75xx
[    1.049796] usbcore: registered new interface driver smsc95xx
[    1.049834] usbcore: registered new interface driver gl620a
[    1.049872] usbcore: registered new interface driver net1080
[    1.049918] usbcore: registered new interface driver plusb
[    1.049959] usbcore: registered new interface driver rndis_host
[    1.049998] usbcore: registered new interface driver cdc_subset
[    1.050034] usbcore: registered new interface driver zaurus
[    1.050075] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.050139] usbcore: registered new interface driver simcom_wwan
[    1.050178] usbcore: registered new interface driver int51x1
[    1.050217] usbcore: registered new interface driver kalmia
[    1.050263] usbcore: registered new interface driver ipheth
[    1.050308] usbcore: registered new interface driver sierra_net
[    1.050348] usbcore: registered new interface driver cx82310_eth
[    1.050394] usbcore: registered new interface driver cdc_ncm
[    1.050434] usbcore: registered new interface driver qmi_wwan
[    1.050473] usbcore: registered new interface driver cdc_mbim
[    1.050486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.052957] EHCI: ehci_rk_probe e1700000 e1700010
[    1.052976] rockchip_ehci_host ff500000.usb: EHCI Host Controller
[    1.053007] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    1.053339] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    1.068196] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
[    1.068281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.068298] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068313] usb usb1: Product: EHCI Host Controller
[    1.068325] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    1.068338] usb usb1: SerialNumber: ff500000.usb
[    1.068782] hub 1-0:1.0: USB hub found
[    1.068809] hub 1-0:1.0: 1 port detected
[    1.068976] EHCI: ehci_rk_probe ok
[    1.069085] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.069301] usbcore: registered new interface driver cdc_acm
[    1.069315] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.069368] usbcore: registered new interface driver usblp
[    1.069411] usbcore: registered new interface driver cdc_wdm
[    1.069475] usbcore: registered new interface driver usb-storage
[    1.069514] usbcore: registered new interface driver ums-alauda
[    1.069552] usbcore: registered new interface driver ums-cypress
[    1.069591] usbcore: registered new interface driver ums-datafab
[    1.069635] usbcore: registered new interface driver ums_eneub6250
[    1.069685] usbcore: registered new interface driver ums-freecom
[    1.069726] usbcore: registered new interface driver ums-isd200
[    1.069766] usbcore: registered new interface driver ums-jumpshot
[    1.069804] usbcore: registered new interface driver ums-karma
[    1.069842] usbcore: registered new interface driver ums-onetouch
[    1.069881] usbcore: registered new interface driver ums-sddr09
[    1.069920] usbcore: registered new interface driver ums-sddr55
[    1.069982] usbcore: registered new interface driver ums-usbat
[    1.070081] usbcore: registered new interface driver usbserial
[    1.070124] usbcore: registered new interface driver usbserial_generic
[    1.070158] usbserial: USB Serial support registered for generic
[    1.070199] usbcore: registered new interface driver option
[    1.070229] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.070306] usbcore: registered new interface driver trancevibrator
[    1.070319] usb20_otg: version 3.10a 21-DEC-2012
[    1.070779] e1780040
[    1.070793] Core Release: 3.10a
[    1.070806] Setting default values for core params
[    1.070950] Using Buffer DMA mode
[    1.070963] Periodic Transfer Interrupt Enhancement - disabled
[    1.070974] Multiprocessor Interrupt Enhancement - disabled
[    1.070987] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.070997] ^^^^^^^^^^^^^^^^^Device Mode
[    1.071011] Dedicated Tx FIFOs mode
[    1.071032] pcd_init otg_dev = ddf03cc0
[    1.071191] usb20_otg ff580000.usb: DWC OTG Controller
[    1.071219] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    1.071252] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    1.071312] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.071330] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.071344] usb usb2: Product: DWC OTG Controller
[    1.071357] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    1.071370] usb usb2: SerialNumber: ff580000.usb
[    1.071792] hub 2-0:1.0: USB hub found
[    1.071819] hub 2-0:1.0: 1 port detected
[    1.072126] usb20_host: version 3.10a 21-DEC-2012
[    1.074654] e1800040
[    1.074668] Core Release: 3.10a
[    1.074679] Setting default values for core params
[    1.074804] Using Buffer DMA mode
[    1.074816] Periodic Transfer Interrupt Enhancement - disabled
[    1.074827] Multiprocessor Interrupt Enhancement - disabled
[    1.074839] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.074850] ^^^^^^^^^^^^^^^^^^Host Mode
[    1.074877] usb20_host ff540000.usb: DWC OTG Controller
[    1.074904] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    1.074934] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    1.075025] Init: Power Port (0)
[    1.075083] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.075100] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.075116] usb usb3: Product: DWC OTG Controller
[    1.075129] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    1.075141] usb usb3: SerialNumber: ff540000.usb
[    1.075556] hub 3-0:1.0: USB hub found
[    1.075579] hub 3-0:1.0: 1 port detected
[    1.076300] usbcore: registered new interface driver xpad
[    1.076360] usbcore: registered new interface driver usb_acecad
[    1.076408] usbcore: registered new interface driver aiptek
[    1.076454] usbcore: registered new interface driver gtco
[    1.076501] usbcore: registered new interface driver hanwang
[    1.076548] usbcore: registered new interface driver kbtab
[    1.076605] usbcore: registered new interface driver wacom
[    1.076619] ILITEK line = 3281: Enter
[    1.076741] ILITEK line = 2937: Enter ilitek_i2c_probe +++++++++ client->addr = 0x41++++++
[    1.076793] ILITEK line = 2639: 2639,ilitek_request_io_port,ilitek_request_io_port gpio_free(i2c.reset_gpio); reset_gpio = 229  i2c.irq_gpio = 230
[    1.076810] ------------[ cut here ]------------
[    1.076836] WARNING: at drivers/gpio/gpiolib.c:1519 gpiod_free+0xe0/0xfc()
[    1.076847] Modules linked in:
[    1.076866] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0 #38
[    1.076905] [<c0013ec4>] (unwind_backtrace+0x0/0xe0) from [<c001176c>] (show_stack+0x10/0x14)
[    1.076931] [<c001176c>] (show_stack+0x10/0x14) from [<c0036988>] (warn_slowpath_common+0x4c/0x68)
[    1.076954] [<c0036988>] (warn_slowpath_common+0x4c/0x68) from [<c00369bc>] (warn_slowpath_null+0x18/0x1c)
[    1.076976] [<c00369bc>] (warn_slowpath_null+0x18/0x1c) from [<c029d224>] (gpiod_free+0xe0/0xfc)
[    1.077004] [<c029d224>] (gpiod_free+0xe0/0xfc) from [<c0512a64>] (ilitek_request_io_port+0xe4/0x1e8)
[    1.077030] [<c0512a64>] (ilitek_request_io_port+0xe4/0x1e8) from [<c05151c8>] (ilitek_i2c_probe+0xe4/0x3d4)
[    1.077056] [<c05151c8>] (ilitek_i2c_probe+0xe4/0x3d4) from [<c05287b0>] (i2c_device_probe+0xa8/0xd4)
[    1.077081] [<c05287b0>] (i2c_device_probe+0xa8/0xd4) from [<c030d2f4>] (really_probe+0xa8/0x20c)
[    1.077102] [<c030d2f4>] (really_probe+0xa8/0x20c) from [<c030d550>] (driver_probe_device+0x30/0x48)
[    1.077121] [<c030d550>] (driver_probe_device+0x30/0x48) from [<c030d5c8>] (__driver_attach+0x60/0x84)
[    1.077144] [<c030d5c8>] (__driver_attach+0x60/0x84) from [<c030bd90>] (bus_for_each_dev+0x50/0x90)
[    1.077164] [<c030bd90>] (bus_for_each_dev+0x50/0x90) from [<c030cb44>] (bus_add_driver+0xac/0x20c)
[    1.077182] [<c030cb44>] (bus_add_driver+0xac/0x20c) from [<c030dab4>] (driver_register+0x9c/0x138)
[    1.077204] [<c030dab4>] (driver_register+0x9c/0x138) from [<c052a4ec>] (i2c_register_driver+0x40/0xac)
[    1.077224] [<c052a4ec>] (i2c_register_driver+0x40/0xac) from [<c0513074>] (ilitek_init+0x34/0x78)
[    1.077246] [<c0513074>] (ilitek_init+0x34/0x78) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
[    1.077272] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0b88b28>] (do_initcalls+0x70/0xa0)
[    1.077295] [<c0b88b28>] (do_initcalls+0x70/0xa0) from [<c0b88be8>] (kernel_init_freeable+0x90/0x130)
[    1.077317] [<c0b88be8>] (kernel_init_freeable+0x90/0x130) from [<c0834670>] (kernel_init+0x8/0xe4)
[    1.077342] [<c0834670>] (kernel_init+0x8/0xe4) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[    1.077377] ---[ end trace b1e54f4a0269983a ]---
[    1.077464] ILITEK line = 2983: ilitek i2c.irq_gpio = 230, i2c.client->irq = 193
[    1.077479] ILITEK line = 223: Enter 10 ilitek_reset
[    1.166665] dwc_otg_hcd_suspend, usb device mode
[    1.304296] ILITEK line = 350: ilitek_i2c_transfer err
[    1.353942] ILITEK line = 350: ilitek_i2c_transfer err
[    1.412980] ILITEK line = 350: ilitek_i2c_transfer err
[    1.472019] ILITEK line = 350: ilitek_i2c_transfer err
[    1.530660] ILITEK line = 453: ilitek_i2c_write_and_read, i2c write error, ret = -11
[    1.551281] ILITEK line = 350: ilitek_i2c_transfer err
[    1.610320] ILITEK line = 350: ilitek_i2c_transfer err
[    1.669367] ILITEK line = 350: ilitek_i2c_transfer err
[    1.728402] ILITEK line = 350: ilitek_i2c_transfer err
[    1.786509] ILITEK line = 462: ilitek_i2c_write_and_read, i2c read error, ret = -11
[    1.786528] ILITEK line = 2444: ilitek_i2c_read_tp_info, MCU KERNEL version:255.255.255.255.255
[    1.786943] ILITEK line = 350: ilitek_i2c_transfer err
[    1.845940] ILITEK line = 350: ilitek_i2c_transfer err
[    1.904978] ILITEK line = 350: ilitek_i2c_transfer err
[    1.964025] ILITEK line = 350: ilitek_i2c_transfer err
[    2.022664] ILITEK line = 453: ilitek_i2c_write_and_read, i2c write error, ret = -11
[    2.043145] ILITEK line = 350: ilitek_i2c_transfer err
[    2.102189] ILITEK line = 350: ilitek_i2c_transfer err
[    2.161224] ILITEK line = 350: ilitek_i2c_transfer err
[    2.220270] ILITEK line = 350: ilitek_i2c_transfer err
[    2.278504] ILITEK line = 462: ilitek_i2c_write_and_read, i2c read error, ret = -11
[    2.278519] ILITEK line = 3035: ilitek read tp info fail free gpio
[    2.278548] ilitek_i2c: probe of 4-0041 failed with error -1
[    2.278966] sensor_register_slave:mma8452,id=17
[    2.278982] sensor_register_slave:gs_mc3230,id=23
[    2.278992] gsensor_init
[    2.279003] sensor_register_slave:mpu6880_acc,id=24
[    2.279014] sensor_register_slave:mpu6500_acc,id=25
[    2.279025] sensor_register_slave:cm3217,id=48
[    2.279037] sensor_register_slave:cm3218,id=49
[    2.283968] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    2.284019] i2c /dev entries driver
[    2.284640] IR NEC protocol handler initialized
[    2.284655] IR RC5(x) protocol handler initialized
[    2.284665] IR RC6 protocol handler initialized
[    2.284675] IR JVC protocol handler initialized
[    2.284685] IR Sony protocol handler initialized
[    2.284695] IR RC5 (streamzap) protocol handler initialized
[    2.284705] IR SANYO protocol handler initialized
[    2.284715] IR MCE Keyboard/mouse protocol handler initialized
[    2.284875] usbcore: registered new interface driver uvcvideo
[    2.284887] USB Video Class driver (1.1.1)
[    2.284900] CamSys driver version: v0.32.0,  CamSys head file version: v0.11.0
[    2.285924] D1:camsys_mipiphy_probe_cb(115): compatible is rockchip,rk3288
[    2.285924]
[    2.286006] D1:camsys_mipiphy_probe_cb(186): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    2.286158] D1:camsys_mipiphy_probe_cb(183): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xe16d8000  size: 0x4000)
[    2.286806] D1:camsys_platform_probe(1394): ff910000.isp memory:
[    2.286826] D1:camsys_platform_probe(1404):     Register memory (phy: 0xff910000 vir: 0xe1740000 size: 0x10000)
[    2.286843] D1:camsys_platform_probe(1399):     I2c memory (phy: 0x1defb000 vir: 0xddefb000 size: 0x1000)
[    2.286858] D1:camsys_init_ext_fsh_module(20): init external flash module
[    2.286870] D1:camsys_platform_probe(1419): Probe ff910000.isp device success
[    2.287219] not find test_power_init dev node
[    2.287278] i2c-core: driver [bq27320] using legacy suspend method
[    2.287289] i2c-core: driver [bq27320] using legacy resume method
[    2.287606] rockchip_temp_probe,line=362
[    2.337557] tsadc ff280000.tsadc: initialized
[    2.337930] device-mapper: uevent: version 1.0.3
[    2.338197] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    2.338482] Bluetooth: HCI UART driver ver 2.2
[    2.338499] Bluetooth: HCI H4 protocol initialized
[    2.338511] Bluetooth: HCILL protocol initialized
[    2.338522] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.21
[    2.338534] rtk_btusb: Register usb char device interface for BT driver
[    2.338717] usbcore: registered new interface driver rtk_btusb
[    2.339350] DVFS WARNING:    clk_enable_dvfs: clk(aclk_vio1) freq table all value are smaller than default(576000), use default, just enable dvfs
[    2.343533] cpufreq version 1.0, suspend freq 1200 MHz
[    2.343731] cpuidle: using governor ladder
[    2.343746] cpuidle: using governor menu
[    2.343784] Synopsys Designware Multimedia Card Interface Driver
[    2.343797] MHSC version = Ver 2.00 2015-06-10
[    2.344106] dw cru_regsbase addr 0x1d8.
[    2.344119] dw cru_reset_offset val 3.
[    2.344135] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    2.344179] dwmmc_rockchip ff0f0h00.@rs3mm8:  $ led to get hpclk_mmc
[    2.344483] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    2.344656] dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[    2.344782] 1358..dw_mci_set_ios:  no card. [mmc0]
[    2.357242] 1358..dw_mci_set_ios:  no card. [mmc0]
[    2.376959] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    2.378057] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    2.378076] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    2.378391] dw cru_regsbase addr 0x1d8.
[    2.378404] dw cru_reset_offset val 0.
[    2.378419] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    2.378458] dwmmc_rockchip ff0c0000.rksdmmc: failed to get hpclk_mmc
[    2.380430] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    2.380551] dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]
[    2.380971] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    2.381042] 1358..dw_mci_set_ios:  no card. [mmc1]
[    2.396598] 1358..dw_mci_set_ios:  no card. [mmc1]
[    2.409065] mmc0: BKOPS_EN bit is not set
[    2.410949] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
[    2.413236] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[    2.413261] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    2.413282] [mmc0] tuning regsbase addr 0x218.
[    2.414222] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-282 (26 len)
[    2.414236] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-282 (26 len)
[    2.414247] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 147
[    2.414293] mmc0: new HS200 MMC card at address 0001
[    2.414574] mmcblk0: mmc0:0001 AWPD3R 14.5 GiB
[    2.414871] rkpart: partition size too small (0)
[    2.414891]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    2.414900]       misc: 0x000800000 -- 0x000c00000 (4 MB)
[    2.414910]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    2.414919]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[    2.414928]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    2.414937]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[    2.414945]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
[    2.414954]      cache: 0x00a000000 -- 0x012000000 (128 MB)
[    2.414962]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
[    2.414971]     system: 0x012400000 -- 0x072400000 (1536 MB)
[    2.414979]   metadata: 0x072400000 -- 0x073400000 (16 MB)
[    2.414988] baseparamer: 0x073400000 -- 0x073800000 (4 MB)
[    2.414997]   userdata: 0x073800000 -- 0x0b3800000 (1024 MB)
[    2.415005] radical_update: 0x0b3800000 -- 0x0b7800000 (64 MB)
[    2.415014]       user: 0x0b7800000 -- 0x3a3a00000 (11970 MB)
[    2.415043]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15[    2.416350] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    2.416366] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]
[    2.416686] dw cru_regsbase addr 0x1d8.
[    2.416695] dw cru_reset_offset val 1.
[    2.416706] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    2.416741] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
[    2.416957] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    2.417088] dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    2.417356] 1358..dw_mci_set_ios:  no card. [mmc2]
[    2.435960] 1358..dw_mci_set_ios:  no card. [mmc2]
[    2.455640] 1358..dw_mci_set_ios:  no card. [mmc2]
[    2.455657] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    2.455670] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    2.455965] hidraw: raw HID events driver (C) Jiri Kosina
[    2.457438] usbcore: registered new interface driver usbhid
[    2.457449] usbhid: USB HID core driver
[    2.457571] ashmem: initialized
[    2.457681] logger: created 256K log 'log_main'
[    2.457785] logger: created 256K log 'log_events'
[    2.457885] logger: created 256K log 'log_radio'
[    2.457979] logger: created 256K log 'log_system'
[    2.459259] input: rk29-keypad as /devices/ff100000.adc/key.32/input/input0
[    2.460162] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ff890000.rockchip-i2s; cannot claim for 2-0010
[    2.460178] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
[    2.460189] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
[    2.460201] ES8323 2-0010: Error applying setting, reverse things back
[    2.460654] es8323_i2c_probe:register ISR (irq=196)
[    2.461328] rockchip-spdif ff8b0000.rockchip-spdif: spdif ready.
[    2.461644] es8323_probe
[    2.701618] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    2.701640] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]
[    3.046013] EHCI: rk_ehci_hcd_enable, disable host controller
[    3.046021] dwc_otg_hcd_enable, enable host controller
[    3.149375] Using Buffer DMA mode
[    3.149383] Periodic Transfer Interrupt Enhancement - disabled
[    3.149389] Multiprocessor Interrupt Enhancement - disabled
[    3.149395] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.149401] ^^^^^^^^^^^^^^^^^^Host Mode
[    3.193687] Init: Power Port (0)
[    3.193728] ff540000.usb resume, HPRT0:0x21401
[    3.226643] rockchip-es8323 rockchip-es8323.29:  ES8323 HiFi <-> ff890000.rockchip-i2s mapping ok
[    3.229027] rockchip-hdmi-i2s rockchip-hdmi-i2s.27:  rk-hdmi-i2s-hifi <-> ff890000.rockchip-i2s mapping ok
[    3.229378] u32 classifier
[    3.229384]     Actions configured
[    3.229394] Netfilter messages via NETLINK v0.30.
[    3.229446] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.229712] ctnetlink v0.93: registering with nfnetlink.
[    3.229772] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.229780] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.229973] xt_time: kernel timezone is -0000
[    3.230133] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.230241] arp_tables: (C) 2002 David S. Miller
[    3.230273] TCP: cubic registered
[    3.230279] Initializing XFRM netlink socket
[    3.230450] NET: Registered protocol family 10
[    3.230857] mip6: Mobile IPv6
[    3.230879] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.230987] sit: IPv6 over IPv4 tunneling driver
[    3.231261] NET: Registered protocol family 17
[    3.231281] NET: Registered protocol family 15
[    3.231325] Bridge firewalling registered
[    3.231335] Ebtables v2.0 registered
[    3.231482] Bluetooth: RFCOMM TTY layer initialized
[    3.231502] Bluetooth: RFCOMM socket layer initialized
[    3.231510] Bluetooth: RFCOMM ver 1.11
[    3.231515] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.231521] Bluetooth: BNEP filters: protocol multicast
[    3.231529] Bluetooth: BNEP socket layer initialized
[    3.231535] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.231544] Bluetooth: HIDP socket layer initialized
[    3.231566] l2tp_core: L2TP core driver, V2.0
[    3.231578] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    3.231585] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.231774] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    3.231783] [WLAN_RFKILL]: can't find rockchip,grf property
[    3.231789] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6212
[    3.231797] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    3.231805] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    3.231812] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    3.231832] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    3.231848] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    3.231855] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    3.231882] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 3.3V
[    3.231891] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.231927] [BT_RFKILL]: Enter rfkill_rk_init
[    3.232038] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    3.232055] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    3.232067] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    3.232079] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    3.232130] [BT_RFKILL]: Request irq for bt wakeup host
[    3.232225] [BT_RFKILL]: ** disable irq
[    3.232286] [BT_RFKILL]: ap6335 device registered.
[    3.232861] rk3288_init_suspend
[    3.232873] rk3288_suspend_init enter
[    3.233115] rk3288_suspend_init: pm_ctrbits =200007
[    3.233144] gpio_get_dts_info suspend:4
[    3.233150] gpio_get_dts_info resume:4
[    3.233156] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    3.233178] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    3.233299] clks_gating_suspend_init:clkgt info ok
[    3.233385] Registering SWP/SWPB emulation handler
[    3.233689] ddrfreq: verion 1.2 20140526
[    3.233699] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
[    3.233706] ddrfreq: auto-freq=0
[    3.233711] ddrfreq: auto-freq-table[0] 240MHz
[    3.233717] ddrfreq: auto-freq-table[1] 324MHz
[    3.233722] ddrfreq: auto-freq-table[2] 456MHz
[    3.233728] ddrfreq: auto-freq-table[3] 528MHz
[    3.238041] regulator-dummy: disabling
[    3.238110] =======================================================
[    3.238117] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    3.238122] =======================================================
[    3.238127]  WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
[    3.238167] dhd_module_init: in
[    3.238173] ======== bcm_wlan_set_plat_data ========
[    3.238179] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    3.238196] host_oob_irq: 198
[    3.238200] host_oob_irq_flags=4
[    3.238204] dhd_wifi_platform_load: Enter
[    3.238217] Power-up adapter 'DHD generic adapter'
[    3.238221] pcd_pullup, is_on 0
[    3.238238] wifi_platform_set_power = 1
[    3.238243] ======== PULL WL_REG_ON HIGH! ========
[    3.238248] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.238250] file system registered
[    3.238257] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[    3.238263] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[    3.238696] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    3.238704] android_usb gadget: Number of LUNs=2
[    3.238710]  lun0: LUN: removable file: (no medium)
[    3.238716]  lun1: LUN: removable file: (no medium)
[    3.238838] android_usb gadget: android_usb ready
[    3.238903] sensor_init: Probe name sensors
[    3.238917] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[    3.239439] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:27:44 UTC (1293884864)
[    3.243722] rockchip_headset_probe() Can not read property headset_gpio
[    3.243734] rockchip_headset: probe of rockchip_headset.31 failed with error -2
[    3.244133] usbcore: registered new interface driver snd-usb-audio
[    3.244140] ALSA device list:
[    3.244145]   #0: RK_ES8323
[    3.244149]   #1: RK-HDMI-I2S
[    3.244378] Freeing unused kernel memory: 364K (c0b88000 - c0be3000)
[    3.331440] Indeed it is in host mode hprt0 = 00021501
[    3.341235] [WLAN_RFKILL]: wifi turn on power. 156
[    3.383311] type=1403 audit(1293884864.640:2): policy loaded auid=4294967295 ses=4294967295
[    3.403511] init: could not import file 'init.box.samba.rc' from '/init.rk30board.rc'
[    3.405045] init: invalid gid 'trace'
[    3.483907] init: /dev/hw_random not found
[    3.483964] keychord: using input dev rk29-keypad for fevent
[    3.488408] init: /dev/hw_random not found
[    3.489267] fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[    3.490018] resize2fs: resize2fs 1.42.9 (28-Dec-2013)resize2fs: The filesystem is already 393216 blocks long.  Nothing to do!resize2fs:
[    3.492498] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
[    3.496381] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    3.496457] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/system,/system,ext4)=0
[    3.497202] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[    3.502032] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    3.502069] e2fsck: system: clean, 1865/81600 files, 109156/393216 blocks
[    3.505763] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[    3.505820] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/system,target=/system,type=ext4)=0
[    3.508523] usb 3-1: new high-speed USB device number 2 using usb20_host
[    3.508588] Indeed it is in host mode hprt0 = 00001101
[    3.512861] EXT4-fs (mmcblk0p8): recovery complete
[    3.513273] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    3.513329] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0
[    3.513686] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
[    3.517224] EXT4-fs (mmcblk0p11): recovery complete
[    3.517233] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    3.517276] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,/metadata,ext4)=0
[    3.517951] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata
[    3.522087] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    3.522115] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks
[    3.525957] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    3.526011] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0
[    3.526043] fs_mgr: Running /system/bin/fsck.f2fs -f /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
[    3.526838] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory
[    3.526869] fsck.f2fs: fsck.f2fs terminated by exit(255)
[    3.527064] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=f2fs)=-1
[    3.527344] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[    3.547870] wifi_platform_bus_enumerate device present 1
[    3.547879] ======== Card detection to detect SDIO card! ========
[    3.547885] mmc2:mmc host rescan start!
[    3.596530] EXT4-fs (mmcblk0p13): recovery complete
[    3.596903] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    3.596977] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,/data,ext4)=0
[    3.598604] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
[    3.603332] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    3.603363] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata: clean, 3018/65536 files, 39031/262144 blocks
[    3.607384] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic
[    3.607437] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0
[    3.607450] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata on /data with fs_type=ext4 instead of f2fs
[    3.621107] arm_release_ver of this mali_ko is 'r6p0-02rel0', rk_ko_ver is '13', built at '09:15:10', on 'Oct 22 2015'.
[    3.621175] mali ffa30000.gpu: Continuing without Mali clock control
[    3.621208] mali pd enabled
[    3.621215] clk enabled
[    3.621224] MALI_DVFS_STEP = 4, div_dvfs = 10
[    3.621231] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
[    3.621237] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
[    3.621243] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
[    3.621249] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
[    3.621331] turn on mali power
[    3.621339] kbase_platform_rk_init,register_reboot_notifier
[    3.621378] hrtimer: interrupt took 10791 ns
[    3.621458] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[    3.622117] mali ffa30000.gpu: Probed as mali0
[    3.623099] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    3.623687] rk29_ipp: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    3.624260] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    3.625150] zram0: detected capacity change from 0 to 533413888
[    3.671822] Adding 520908k swap on /dev/block/zram0.  Priority:-1 extents:1 across:520908k SS
[    3.703510] EXT4-fs (mmcblk0p13): Unrecognized mount option "background_gc=on" or missing value
[    3.705555] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[    3.705568] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.705575] usb 3-1: Product: USB 2.0 Hub
[    3.705934] hub 3-1:1.0: USB hub found
[    3.705992] hub 3-1:1.0: 4 ports detected
[    3.713632] bat_cap: oldcap path is /sys/devices/ff100000.adc
[    3.713674] bat_cap: oldcap_path no exist
[    3.713817] binder: 148:148 transaction failed 29189, size 0-0
[    3.714229] init: Warning!  Service displayd needs a SELinux domain defined; please fix!
[    3.717462] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    3.717480] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    3.717642] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[    3.718031] rtk_btusb: btchr_open: BT usb char device is opening
[    3.718040] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    3.718053] rtk_btusb: btchr_open: BT usb char device is opening
[    3.718058] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    3.718074] rtk_btusb: btchr_open: BT usb char device is opening
[    3.718080] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    3.718091] rtk_btusb: btchr_open: BT usb char device is opening
[    3.718097] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    3.764358] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
[    3.790594] logd.auditd: start
[    3.799118] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.800648] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.802163] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.804990] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.808353] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[    3.812886] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[    3.814244] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[    3.814629] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
[    3.814795] init: Warning!  Service drmservice needs a SELinux domain defined; please fix!
[    3.814999] init: cannot find '/system/bin/akmd', disabling 'akmd'
[    3.816087] android_usb: already disabled
[    3.823439] ff540000.usb suspend, HPRT0:0x1485
[    3.826461] read descriptors
[    3.826476] read strings
[    3.826501] pcd_pullup, is_on 1
[    3.909125] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    3.909150] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[    3.909208] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc2]
[    3.910444] mmc2: new high speed SDIO card at address 0001
[    3.926935] bcmsdh_register: register client driver
[    3.927036] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    3.927095] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    3.927102] bus num (host idx)=2, slot num (rca)=1
[    3.927108] found adapter info 'DHD generic adapter'
[    3.927317] F1 signature read @0x18000000=0x1541a9a6
[    3.928644] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x1 pkg:0x4
[    3.929106] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
[    3.929172] wifi_platform_get_mac_addr
[    3.929178] ======== bcm_wlan_get_mac_address ========
[    3.929183] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[    3.929191] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[    3.929197] [WLAN_RFKILL]: This mac address is not valid, ignored...
[    3.929205] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=1
[    3.929237] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txt
[    3.929512] wl_create_event_handler(): thread:wl_event_handler:bc started
[    3.929517] tsk Enter, tsk = 0xdd70149c
[    3.929646] dhd_attach(): thread:dhd_watchdog_thread:bd started
[    3.929687] dhd_attach(): thread:dhd_dpc:be started
[    3.929706] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[    3.929734] dhd_attach(): thread:dhd_rxf:bf started
[    3.929744] dhd_deferred_work_init: work queue initialized
[    3.929859] dhdsdio_probe_init: set use_rxchain 0 from config.txt
[    3.935504] Dongle Host Driver, version 1.201.59.5 (r506368)
[    3.935504] Compiled in drivers/net/wireless/bcmdhd on May 20 2017 at 00:25:54
[    3.936236] Register interface [wlan0]  MAC: cc:b8:a8:25:5b:04
[    3.936236]
[    3.936250] dhd_prot_ioctl : bus is down. we have nothing to do
[    3.936283] bcmsdh_oob_intr_unregister: Enter
[    3.936289] bcmsdh_oob_intr_unregister: irq is not registered
[    3.936298] dhd_txglom_enable: enable 0
[    3.936302] dhd_bus_devreset:  WLAN OFF DONE
[    3.936334] wifi_platform_set_power = 0
[    3.936339] ======== PULL WL_REG_ON LOW! ========
[    3.936345] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    4.039884] [WLAN_RFKILL]: wifi shut off power.
[    4.039899] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[    4.039905] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[    4.039977] dhd_module_init: Exit err=0
[    4.698468] healthd: No charger supplies found
[    4.698483] healthd: No battery devices found
[    4.717269] rk3288-lcdc lcdc0: blank mode:0
[    6.240720] warning: `system_server' uses 32-bit capabilities (legacy support in use)
[    7.510408] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.510432] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.510441] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[    7.510537] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[    7.510553] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[    7.510584] rockchip_gpio_request:GPIO7-13
[    7.510595] rockchip_gpio_set:GPIO7-13 level = 1
[    7.510602] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    7.510612] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[    7.510622] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[    7.510631] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    7.510652] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[    7.515702] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    7.515714] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    7.515822] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    7.515855] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[    7.516927] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[    7.517989] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.519049] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[    7.521094] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.521155] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[    7.521165] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.521177] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[    7.522268] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    7.522299] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    7.524363] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[    7.524378] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    7.524388] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.524396] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.524403] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[    7.529711] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.529724] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.529733] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[    7.529826] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[    7.529840] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[    7.529878] rockchip_gpio_set:GPIO7-13 level = 1
[    7.529884] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    7.529895] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[    7.529904] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[    7.529913] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    7.529928] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[    7.534963] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    7.534973] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    7.535079] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    7.535106] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[    7.536174] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[    7.537230] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.538294] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[    7.540339] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.540350] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.540411] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[    7.540421] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.540434] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[    7.541532] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    7.541560] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    7.543616] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[    7.543633] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    7.543644] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.543652] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.543660] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[    7.548831] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.548845] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.548853] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[    7.548949] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[    7.548965] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[    7.549002] rockchip_gpio_set:GPIO7-13 level = 1
[    7.549009] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    7.549019] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[    7.549029] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[    7.549037] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    7.549052] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[    7.554090] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    7.554101] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    7.554206] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    7.554234] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[    7.555302] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[    7.556360] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.557425] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[    7.559470] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.559480] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.559541] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[    7.559551] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.559564] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[    7.560645] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    7.560673] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    7.562732] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[    7.562749] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    7.562761] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.562769] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.562797] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[    7.566556] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.566569] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.566579] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[    7.566679] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[    7.566694] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[    7.566732] rockchip_gpio_set:GPIO7-13 level = 1
[    7.566738] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    7.566748] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[    7.566757] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[    7.566766] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    7.566781] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV5648) register success
[    7.571822] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    7.571832] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    7.571937] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    7.571965] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[    7.573032] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[    7.574095] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.575171] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[    7.577222] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.577233] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.577300] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[    7.577310] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.577323] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[    7.578411] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    7.578441] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    7.580496] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[    7.580511] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    7.580521] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.580529] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.580537] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[    7.584651] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.584664] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.584672] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[    7.584768] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 1) for dev_id 0x1000000 success!
[    7.584781] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x1000000 success!
[    7.584790] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[    7.584887] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[    7.589924] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    7.589934] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    7.590039] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    7.590064] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[    7.591140] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[    7.592203] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.593267] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 0
[    7.595313] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.595374] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 1
[    7.595385] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.595397] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[    7.596495] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    7.596526] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    7.598586] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[    7.598604] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    7.598616] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.598625] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.598633] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[    7.603706] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.603718] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    7.603727] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[    7.603817] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[    7.603831] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[    7.603841] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[    7.603866] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: TC358749XBG) register success
[    7.608905] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    7.608915] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    7.609021] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    7.609048] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[    7.610115] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[    7.611171] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.612232] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[    7.614282] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.614293] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[    7.614350] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[    7.614360] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    7.614372] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[    7.615456] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    7.615480] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    7.617533] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[    7.617548] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    7.617559] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.617566] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    7.617574] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[    8.959892] [otg id chg] last id -1 current id 1
[    8.959919] PortPower off
[    8.959927] rk_battery_charger_detect_cb , battery_charger_detect 6
[    9.059352] Using Buffer DMA mode
[    9.059372] Periodic Transfer Interrupt Enhancement - disabled
[    9.059379] Multiprocessor Interrupt Enhancement - disabled
[    9.059386] OTG VER PARAM: 0, OTG VER FLAG: 0
[    9.059392] ^^^^^^^^^^^^^^^^^Device Mode
[    9.296392] healthd: battery none chg=
[    9.477685] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[    9.477706] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[    9.477712] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[    9.477717] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[    9.477723] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[    9.477728] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[    9.477733] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[    9.550287] ***************vbus detect*****************
[    9.552476] rk_battery_charger_detect_cb , battery_charger_detect 1
[    9.729501] Using Buffer DMA mode
[    9.729517] Periodic Transfer Interrupt Enhancement - disabled
[    9.729523] Multiprocessor Interrupt Enhancement - disabled
[    9.729529] OTG VER PARAM: 0, OTG VER FLAG: 0
[    9.729534] ^^^^^^^^^^^^^^^^^Device Mode
[    9.729573] *******************soft connect!!!*******************
[    9.793994] acc_open
[    9.794023] acc_release
[    9.845225] USB RESET
[    9.937280] android_work: sent uevent USB_STATE=CONNECTED
[    9.940760] USB RESET
[   10.068412] android_usb gadget: high-speed config #1: android
[   10.068536] android_work: sent uevent USB_STATE=CONFIGURED
[   10.874984] phy_power_on: enable = 1
[   10.914390] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[   10.914429] eth0: device MAC address 42:d2:fa:67:18:da
[   10.916519] libphy: stmmac: probed
[   10.916531] eth0: PHY ID 001cc816 at 0 IRQ 192 (stmmac-0:00) active
[   10.916539] eth0: PHY ID 001cc816 at 1 IRQ 192 (stmmac-0:01) active
[   11.239328] dwc_otg_hcd_resume, usb device mode
[   11.341373] ff540000.usb resume, HPRT0:0x1485
[   11.345389] dwc_otg_hcd_suspend, usb device mode
[   11.390547] ff540000.usb suspend, HPRT0:0x1485
[   11.592537] FAT-fs (mmcblk0p15): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.613241] init: no such service 'fuse_internal_sd'
[   12.052285] pm policy 0 -> 1
[   13.587407] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.587435] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.587446] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.594629] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.594649] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.594689] rockchip_gpio_set:GPIO7-13 level = 1
[   13.594696] rockchip_gpio_direction_output:set GPIO7-13 level 1
[   13.594708] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[   13.594719] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[   13.594730] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.594754] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[   13.599817] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.599830] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.599937] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.599969] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.601037] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.602092] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.603151] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.605199] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.605263] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.605273] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.605285] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.606364] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.606387] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.608433] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.608449] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.608460] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.608468] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.608476] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.609232] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.609242] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.609251] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.609335] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.609350] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.609386] rockchip_gpio_set:GPIO7-13 level = 1
[   13.609392] rockchip_gpio_direction_output:set GPIO7-13 level 1
[   13.609402] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[   13.609412] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[   13.609421] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.609436] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[   13.614472] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.614483] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.614589] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.614614] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.615678] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.616738] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.617798] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.619837] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.619846] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.619902] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.619912] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.619925] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.621007] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.621031] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.623079] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.623091] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.623101] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.623109] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.623116] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.623699] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.623709] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.623718] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.623796] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.623810] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.623845] rockchip_gpio_set:GPIO7-13 level = 1
[   13.623852] rockchip_gpio_direction_output:set GPIO7-13 level 1
[   13.623861] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[   13.623871] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[   13.623879] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.623892] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[   13.628934] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.628944] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.629050] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.629072] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.630135] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.631190] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.632249] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.634289] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.634298] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.634349] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.634359] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.634371] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.635446] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.635468] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.637514] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.637526] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.637535] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.637543] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.637552] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.638077] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.638087] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.638095] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.638170] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.638184] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.638214] rockchip_gpio_set:GPIO7-13 level = 1
[   13.638221] rockchip_gpio_direction_output:set GPIO7-13 level 1
[   13.638229] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[   13.638239] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[   13.638248] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.638260] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV5648) register success
[   13.643303] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.643316] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.643422] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.643449] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.644519] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.645576] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.646633] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.648669] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.648677] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.648733] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.648741] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.648751] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.649829] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.649850] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.651893] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.651905] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.651914] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.651920] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.651926] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.652450] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.652459] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.652466] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.652533] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 1) for dev_id 0x1000000 success!
[   13.652544] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x1000000 success!
[   13.652552] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[   13.652639] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[   13.657662] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.657670] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.657774] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.657794] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.658850] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.659899] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.660952] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 0
[   13.662985] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.663026] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 1
[   13.663034] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.663045] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.664113] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.664132] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.666173] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[   13.666184] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.666192] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.666198] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.666204] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.666829] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.666837] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.666844] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.666903] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.666914] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.666921] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[   13.666935] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: TC358749XBG) register success
[   13.671964] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.671975] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.672079] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.672102] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[   13.673162] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.674214] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.675268] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.677303] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.677311] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.677362] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.677370] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.677380] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.678453] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.678472] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.680515] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.680527] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.680536] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.680542] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.680548] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.689738] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.689751] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.689757] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.689829] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.689840] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.689873] rockchip_gpio_set:GPIO7-13 level = 1
[   13.689878] rockchip_gpio_direction_output:set GPIO7-13 level 1
[   13.689887] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[   13.689896] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[   13.689903] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.689922] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[   13.694952] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.694960] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.695064] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.695089] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.696146] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.697195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.698246] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.700282] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.700327] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.700335] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.700345] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.701413] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.701431] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.703472] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.703484] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.703491] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.703497] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.703504] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.704061] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.704069] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.704076] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.704139] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.704150] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.704178] rockchip_gpio_set:GPIO7-13 level = 1
[   13.704184] rockchip_gpio_direction_output:set GPIO7-13 level 1
[   13.704191] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[   13.704198] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[   13.704205] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.704216] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[   13.709237] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.709245] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.709350] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.709367] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.710432] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.711484] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.712537] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.714573] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.714580] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.714623] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.714631] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.714641] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.715714] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.715733] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.717774] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.717785] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.717793] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.717799] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.717805] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.718284] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.718292] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.718298] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.718359] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.718371] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.718397] rockchip_gpio_set:GPIO7-13 level = 1
[   13.718402] rockchip_gpio_direction_output:set GPIO7-13 level 1
[   13.718410] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[   13.718417] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[   13.718424] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.718434] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[   13.723457] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.723464] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.723569] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.723586] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.724641] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.725690] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.726742] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.728774] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.728781] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.728821] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.728829] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.728839] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.729903] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.729919] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.731957] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.731967] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.731974] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.731980] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.731986] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.732482] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.732491] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.732498] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.732562] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.732573] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.732601] rockchip_gpio_set:GPIO7-13 level = 1
[   13.732606] rockchip_gpio_direction_output:set GPIO7-13 level 1
[   13.732615] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x5
[   13.732622] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xb824,result=0xb824
[   13.732629] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.732639] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV5648) register success
[   13.737662] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.737670] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.737774] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.737795] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.738851] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.739901] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.740957] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.743003] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.743011] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.743054] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.743062] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.743073] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.744144] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.744162] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.746204] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.746215] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.746223] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.746229] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.746235] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.746658] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.746666] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.746672] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.746735] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 1) for dev_id 0x1000000 success!
[   13.746746] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x1000000 success!
[   13.746753] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[   13.746835] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[   13.751853] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.751861] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.751965] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.751983] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.753038] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.754087] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.755139] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 0
[   13.757171] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.757212] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 1
[   13.757221] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.757231] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.758297] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.758312] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.760350] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[   13.760360] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.760368] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.760374] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.760380] D1:camsys_release(763): camsys_marvin(ddef5110) is closed
[   13.760975] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.760983] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.760989] D1:camsys_open(739): camsys_marvin(ddef5110) is opened!
[   13.761048] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[   13.761058] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[   13.761066] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[   13.761081] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: TC358749XBG) register success
[   13.766098] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.766106] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.766210] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.766227] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[   13.767284] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[   13.768345] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.769412] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[   13.771453] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.771461] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[   13.771512] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[   13.771520] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.771530] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[   13.772611] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.772636] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.774679] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.774690] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.774699] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.774705] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.774711] D1:camsys_release(763): camsys_marvin(ddef5110) is closed

麻烦各位大神看看，有木有遇到类似问题，怎么解？

xi0325

补发异常现象图片

HelloBirthday

ro.htg.force参数

名字要低调

你好，解决了吗

bzhao

你好，解决了吗，　关注此问题