<6>[ 0.000000] Booting Linux on physical CPU 0x500
<6>[ 0.000000] Initializing cgroup subsys cpu
<6>[ 0.000000] Initializing cgroup subsys cpuacct
<5>[ 0.000000] Linux version 3.10.0 (root@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Wed May 31 20:10:53 PDT 2017
<4>[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
<4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>[ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
<6>[ 0.000000] hdmi init vic is -1
<4>[ 0.000000] rockchip_ion_reserve
<6>[ 0.000000] ion heap(drm): base(0) size(0) align(0)
<6>[ 0.000000] ion heap(cma): base(0) size(1000000) align(0)
<6>[ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
<6>[ 0.000000] cma: CMA: reserved 16 MiB at 7f000000
<6>[ 0.000000] ion_reserve: cma reserved base 7f000000 size 16777216
<6>[ 0.000000] cma: CMA: reserved 16 MiB at 1f000000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 524288
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0d8d000, node_mem_map c0eb6000
<7>[ 0.000000] Normal zone: 1024 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 3072 pages used for memmap
<7>[ 0.000000] HighMem zone: 393216 pages, LIFO batch:31
<6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1f10000 s13376 r8192 d15296 u36864
<7>[ 0.000000] pcpu-alloc: s13376 r8192 d15296 u36864 alloc=9*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523264
<5>[ 0.000000] Kernel command line: vmalloc=496M console=ttyS2 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00300000@0x00092000(system),0x00008000@0x00392000(metadata),0x00002000@0x0039A000(baseparamer),0x00400000@0x0039C000(userdata),0x00020000@0x005BC000(radical_update),-@0x005DC000(user) storagemedia=emmc loader.timestamp=2017-06-08_19:25:45 hdmi.vic=-1 tve.format=-1
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] allocated 4194304 bytes of page_cgroup
<6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>[ 0.000000] Memory: 2048MB = 2048MB total
<5>[ 0.000000] Memory: 2026480k/2026480k available, 70672k reserved, 1556480K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc0ba7504 (11902 kB)
<5>[ 0.000000] .init : 0xc0ba8000 - 0xc0c01440 ( 358 kB)
<5>[ 0.000000] .data : 0xc0c02000 - 0xc0d94640 (1610 kB)
<5>[ 0.000000] .bss : 0xc0d94640 - 0xc0eb5a7c (1158 kB)
<6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
<4>[ 0.000000] rk_clk_tree_init start!
<3>[ 0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
<3>[ 0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
<4>[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
<4>[ 0.000000] rkclk_init_clks: cnt_parent = 7
<4>[ 0.000000] rkclk_init_clks: cnt_rate = 29
<4>[ 0.000000] rk3288 set GPLL BW 20 for HDMI!
<6>[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
<6>[ 0.000000] Switching to timer-based delay loop
<6>[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
<6>[ 0.000000] process version: 3
<6>[ 0.000000] channel:0, lkg:24
<6>[ 0.000000] target-temp:80
<6>[ 0.000000] channel:2, lkg:0
<6>[ 0.000000] channel:0, lkg:24
<6>[ 0.000000] channel:1, lkg:19
<6>[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
<6>[ 0.499821] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
<6>[ 0.499837] pid_max: default: 32768 minimum: 301
<6>[ 0.499952] Security Framework initialized
<6>[ 0.499968] SELinux: Initializing.
<7>[ 0.500003] SELinux: Starting in permissive mode
<6>[ 0.500042] Mount-cache hash table entries: 512
<6>[ 0.500683] Initializing cgroup subsys debug
<6>[ 0.500697] Initializing cgroup subsys memory
<6>[ 0.500723] Initializing cgroup subsys freezer
<6>[ 0.500752] CPU: Testing write buffer coherency: ok
<3>[ 0.501065] /cpus/cpu@0 missing clock-frequency property
<3>[ 0.501079] /cpus/cpu@1 missing clock-frequency property
<3>[ 0.501089] /cpus/cpu@2 missing clock-frequency property
<3>[ 0.501098] /cpus/cpu@3 missing clock-frequency property
<6>[ 0.501151] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
<6>[ 0.501202] Setting up static identity map for 0xc0854810 - 0xc0854868
<6>[ 0.503671] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x1745 (version 3.1)
<4>[ 0.577984] CPU1: Booted secondary processor
<6>[ 0.578018] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
<4>[ 0.597654] CPU2: Booted secondary processor
<6>[ 0.597678] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
<4>[ 0.617365] CPU3: Booted secondary processor
<6>[ 0.617388] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
<6>[ 0.617490] Brought up 4 CPUs
<6>[ 0.617518] SMP: Total of 4 processors activated (192.00 BogoMIPS).
<6>[ 0.617528] CPU: All CPU(s) started in SVC mode.
<6>[ 0.618264] devtmpfs: initialized
<6>[ 0.622567] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
<6>[ 0.623663] pinctrl core: initialized pinctrl subsystem
<6>[ 0.623914] regulator-dummy: no parameters
<6>[ 0.637710] NET: Registered protocol family 16
<6>[ 0.639503] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[ 0.639881] ion_snapshot: 0x1ea98000 map to 0xe0907000 and copy to 0xc0e90d4c (version 0.1)
<6>[ 0.640121] Registered FIQ tty driver
<3>[ 0.640525] fiq-debugger is disabled in device tree
<4>[ 0.641196] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
<4>[ 0.641219] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
<4>[ 0.641236] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
<4>[ 0.641252] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
<4>[ 0.641343] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
<4>[ 0.641409] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
<4>[ 0.641470] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
<4>[ 0.641532] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
<4>[ 0.641595] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
<4>[ 0.641656] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
<4>[ 0.641716] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
<4>[ 0.641779] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
<4>[ 0.641848] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
<4>[ 0.641913] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
<4>[ 0.641927] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
<4>[ 0.641939] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
<4>[ 0.641950] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
<7>[ 0.642030] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0
<7>[ 0.642087] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
<7>[ 0.642141] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
<7>[ 0.642200] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
<7>[ 0.642256] gpiochip_add: registered GPIOs 128 to 159 on device: gpio4
<7>[ 0.642311] gpiochip_add: registered GPIOs 160 to 191 on device: gpio5
<7>[ 0.642371] gpiochip_add: registered GPIOs 192 to 223 on device: gpio6
<7>[ 0.642426] gpiochip_add: registered GPIOs 224 to 255 on device: gpio7
<7>[ 0.642479] gpiochip_add: registered GPIOs 256 to 287 on device: gpio8
<7>[ 0.642533] gpiochip_add: registered GPIOs 288 to 319 on device: gpio15
<4>[ 0.642563] rockchip_interrupts_register:bank_num=7
<7>[ 0.644510] of_get_named_gpio_flags exited with status 136
<4>[ 0.644522] of_get_gpio_init_config:gpio[0] = 136, value = 0
<4>[ 0.644566] rockchip_pinctrl_probe:init ok
<6>[ 0.651527] rk_iommu ff900800.iep_mmu: (iep) Enter
<6>[ 0.651616] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[ 0.651630] rk_iommu ff900800.iep_mmu: (iep) Initialized
<6>[ 0.651801] rk_iommu ff950800.vip_mmu: (vip) Enter
<6>[ 0.651875] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[ 0.651888] rk_iommu ff950800.vip_mmu: (vip) Initialized
<6>[ 0.652055] rk_iommu ff930300.vopb_mmu: (vopb) Enter
<6>[ 0.652124] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[ 0.652136] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
<6>[ 0.652295] rk_iommu ff940300.vopl_mmu: (vopl) Enter
<6>[ 0.652367] rk_iommu ff940300.vopl_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[ 0.652379] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
<6>[ 0.652554] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
<6>[ 0.652628] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[ 0.652640] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
<6>[ 0.652803] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
<6>[ 0.652876] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[ 0.652888] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
<6>[ 0.653063] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
<6>[ 0.653144] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[ 0.653156] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
<6>[ 0.654821] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.654834] hw-breakpoint: maximum watchpoint size is 4 bytes.
<3>[ 0.655414] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
<4>[ 0.655437] DDR DEBUG: version 1.00 20150126
<4>[ 0.655465] DDR DEBUG: Channel a:
<4>[ 0.655474] DDR DEBUG: DDR3 Device
<4>[ 0.655487] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
<4>[ 0.655496] DDR DEBUG: Channel b:
<4>[ 0.655503] DDR DEBUG: DDR3 Device
<4>[ 0.655515] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
<4>[ 0.655525] DDR DEBUG: addr=0xd9e000
<4>[ 0.655534] DDR DEBUG: stride=9, size=256, halfcap=40000000
<4>[ 0.655543] DDR DEBUG: socAddr[0]=0xd9e000, socAddr[1]=0xd9e100
<4>[ 0.655553] DDR DEBUG: chAddr[0]=0xd9e000, chAddr[1]=0xd9e000
<4>[ 0.655564] DDR DEBUG: dtar[0]=0x601b3000, dtar[1]=0x601b3000
<4>[ 0.655618] DDR DEBUG: init success!!! freq=200MHz
<4>[ 0.655626] DDR DEBUG: Channel a:
<4>[ 0.655638] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[ 0.655652] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[ 0.655664] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[ 0.655677] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[ 0.655688] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[ 0.655697] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
<4>[ 0.655706] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<4>[ 0.655713] DDR DEBUG: Channel b:
<4>[ 0.655725] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[ 0.655737] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[ 0.655750] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[ 0.655762] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[ 0.655773] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[ 0.655782] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
<4>[ 0.655791] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<6>[ 0.680384] bio: create slab <bio-0> at 0
<6>[ 0.680919] Rockchip hdmi driver version 2.0
<6>[ 0.680919] .
<5>[ 0.682093] SCSI subsystem initialized
<6>[ 0.682254] usbcore: registered new interface driver usbfs
<6>[ 0.682300] usbcore: registered new interface driver hub
<6>[ 0.682387] usbcore: registered new device driver usb
<7>[ 0.682646] of_get_named_gpio_flags exited with status 14
<7>[ 0.682685] of_get_named_gpio_flags exited with status 12
<7>[ 0.683751] of_get_named_gpio_flags exited with status 15
<7>[ 0.683770] of_get_named_gpio_flags exited with status 16
<6>[ 0.685052] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
<7>[ 0.685166] of_get_named_gpio_flags exited with status 260
<7>[ 0.685187] of_get_named_gpio_flags exited with status 261
<6>[ 0.685704] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
<7>[ 0.685806] of_get_named_gpio_flags exited with status 201
<7>[ 0.685825] of_get_named_gpio_flags exited with status 202
<6>[ 0.686175] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
<7>[ 0.686290] of_get_named_gpio_flags exited with status 81
<7>[ 0.686309] of_get_named_gpio_flags exited with status 80
<6>[ 0.686451] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
<7>[ 0.686549] of_get_named_gpio_flags exited with status 241
<7>[ 0.686567] of_get_named_gpio_flags exited with status 242
<6>[ 0.686700] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
<6>[ 0.686817] media: Linux media interface: v0.10
<6>[ 0.686864] Linux video capture interface: v2.00
<6>[ 0.686920] pps_core: LinuxPPS API ver. 1 registered
<6>[ 0.686930] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
<6>[ 0.686950] PTP clock support registered
<4>[ 0.687006] i2c-core: driver [bq24296] using legacy suspend method
<4>[ 0.687017] i2c-core: driver [bq24296] using legacy resume method
<4>[ 0.687703] ion_drm_heap_create: 0@0
<6>[ 0.687837] Rockchip ion module is successfully loaded (v1.1)
<6>[ 0.687999] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.688422] Bluetooth: Core ver 2.16
<6>[ 0.688457] NET: Registered protocol family 31
<6>[ 0.688467] Bluetooth: HCI device and connection manager initialized
<6>[ 0.688483] Bluetooth: HCI socket layer initialized
<6>[ 0.688497] Bluetooth: L2CAP socket layer initialized
<6>[ 0.688523] Bluetooth: SCO socket layer initialized
<6>[ 0.688752] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 0.689449] act8846_i2c_probe,line=898
<4>[ 0.690450] act8846_parse_dt,line=746
<7>[ 0.690855] of_get_named_gpio_flags exited with status 238
<7>[ 0.690868] of_get_named_gpio_flags exited with status 6
<7>[ 0.690880] of_get_named_gpio_flags exited with status 234
<7>[ 0.690892] of_get_named_gpio_flags exited with status 259
<4>[ 0.690913] act8846_i2c_probe: act8846_pmic_hold=1
<4>[ 0.690935] act8846_i2c_probe: act8846_pmic_sleep=1
<4>[ 0.690950] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
<4>[ 0.690965] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
<6>[ 0.693048] act_dcdc1: 1200 mV
<6>[ 0.696010] vccio: 3300 mV
<6>[ 0.697874] vdd_logic: 700 <--> 1500 mV at 1100 mV
<6>[ 0.700839] act_dcdc4: 2000 mV
<6>[ 0.702093] vccio_sd: 1800 <--> 3300 mV at 3300 mV
<6>[ 0.704387] act_ldo2: 1050 mV
<6>[ 0.706742] act_ldo3: 3300 mV
<6>[ 0.709042] act_ldo4: 3300 mV
<6>[ 0.711339] act_ldo5: 3300 mV
<6>[ 0.713650] act_ldo6: 1100 mV
<6>[ 0.715953] vcc_18: 1800 mV
<6>[ 0.718252] act_ldo8: 1850 mV
<6>[ 0.723007] vdd_arm: 712 <--> 1500 mV at 1000 mV
<6>[ 0.727682] vdd_gpu: 712 <--> 1500 mV at 1000 mV
<4>[ 0.728432] rk808_i2c_probe,line=1355
<4>[ 0.729763] The device is not rk808 -11
<4>[ 0.729849] rk808: probe of 0-001b failed with error -11
<4>[ 0.729919] i2c-core: driver [rk818] using legacy suspend method
<4>[ 0.729930] i2c-core: driver [rk818] using legacy resume method
<6>[ 0.731670] Switching to clocksource arch_sys_counter
<6>[ 0.755479] rga: Module initialized.
<6>[ 0.756199] rga2 ff920000.rga: rga ion client create success!
<6>[ 0.756362] rga: Driver loaded succesfully
<6>[ 0.756563] fb disp policy is box
<7>[ 0.756574] uboot-logo-on:0
<6>[ 0.756605] rk-fb rockchip-fb: rk fb ion client create success!
<6>[ 0.756618] rk-fb rockchip-fb: rockchip framebuffer driver probe
<6>[ 0.756925] rk-screen rk_screen.8: rockchip screen probe success
<6>[ 0.757155] rk32-lvds rk32-lvds: rk32 lvds driver probe success
<3>[ 0.757511] rk32-edp ff970000.edp: screen is not edp!
<4>[ 0.757531] rk32-edp: probe of ff970000.edp failed with error -22
<7>[ 0.758016] of_get_named_gpio_flags exited with status 227
<7>[ 0.758041] of_get_named_gpio_flags exited with status 228
<7>[ 0.758059] of_get_named_gpio_flags exited with status 13
<6>[ 0.758075] pwr_ctr_name:lcd_en
<6>[ 0.758075] pwr_type:gpio
<6>[ 0.758075] gpio:227
<6>[ 0.758075] atv_val:1
<6>[ 0.758075] delay:10
<6>[ 0.758075]
<6>[ 0.758108] pwr_ctr_name:lcd_cs
<6>[ 0.758108] pwr_type:gpio
<6>[ 0.758108] gpio:228
<6>[ 0.758108] atv_val:1
<6>[ 0.758108] delay:10
<6>[ 0.758108]
<6>[ 0.758140] pwr_ctr_name:lcd_rst
<6>[ 0.758140] pwr_type:gpio
<6>[ 0.758140] gpio:13
<6>[ 0.758140] atv_val:0
<6>[ 0.758140] delay:10
<6>[ 0.758140]
<6>[ 0.758381] graphics fb0: rockchip framebuffer registerd:fb0
<6>[ 0.758683] graphics fb1: rockchip framebuffer registerd:fb1
<6>[ 0.758856] graphics fb2: rockchip framebuffer registerd:fb2
<6>[ 0.759021] graphics fb3: rockchip framebuffer registerd:fb3
<4>[ 0.783261] rk_battery_charger_detect_cb , battery_charger_detect 1
<6>[ 0.789759] rk3288-lcdc lcdc0: lcdc0: dclk:78000000>>fps:35
<6>[ 0.789784] rk3288-lcdc lcdc0: wakeup from standby!
<6>[ 0.820149] alloc_buffer:ion_phy_addr=0x10000000
<6>[ 0.832921] fb0:phy:10000000>>vir:e0991000>>len:0x1800000
<6>[ 0.832950] rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1eab4000
<6>[ 0.832966] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
<3>[ 0.833178] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
<4>[ 0.833191] rk_fb_trsm_ops_get:un supported transmitter:0!
<6>[ 0.833469] graphics fb4: rockchip framebuffer registerd:fb4
<6>[ 0.833809] graphics fb5: rockchip framebuffer registerd:fb5
<6>[ 0.833982] graphics fb6: rockchip framebuffer registerd:fb6
<6>[ 0.834151] graphics fb7: rockchip framebuffer registerd:fb7
<6>[ 0.834935] unknow screen type: 0
<6>[ 0.835008] rk3288-lcdc lcdc1: lcdc1: dclk:78000000>>fps:35
<6>[ 0.835022] rk3288-lcdc lcdc1: wakeup from standby!
<6>[ 0.838727] fb4:phy:10000000>>vir:e0991000>>len:0x1800000
<6>[ 0.838741] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu enabled
<4>[ 0.839564] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.839703] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.839825] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.839950] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.840111] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.840227] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.840807] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.840974] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.841511] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.841657] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.842194] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.842347] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.842884] rockchip_set_mux:warning ignore bank num 15
<4>[ 0.843034] rockchip_set_mux:warning ignore bank num 15
<6>[ 0.844130] tc358749_hdmiin_probe!
<7>[ 0.844153] of_get_named_gpio_flags exited with status 245
<7>[ 0.844183] of_get_named_gpio_flags exited with status 229
<7>[ 0.844203] of_get_named_gpio_flags exited with status 264
<7>[ 0.844222] of_get_named_gpio_flags exited with status 265
<6>[ 0.844336] tc358749_hdmiin_probe OK!
<6>[ 0.844783] NET: Registered protocol family 2
<6>[ 0.845442] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.845520] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.845593] TCP: Hash tables configured (established 4096 bind 4096)
<6>[ 0.845650] TCP: reno registered
<6>[ 0.845665] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.845688] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.845879] NET: Registered protocol family 1
<6>[ 0.846479] Unpacking initramfs...
<6>[ 0.916471] Freeing initrd memory: 1304K (c5bf0000 - c5d36000)
<6>[ 0.917225] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
<6>[ 0.917770] vcodec_service: probe device ff9a0000.vpu_service
<4>[ 0.917972] vcodec_service: No reset resource define
<6>[ 0.918148] vcodec_service: ff9a0000.vpu_service: power on
<6>[ 0.918257] vcodec_service: probe device ff9a0000.vpu_service
<6>[ 0.918273] vcodec_service: checking hw id 4831
<6>[ 0.919325] vcodec_service: ff9a0000.vpu_service: power off...
<6>[ 0.919371] vcodec_service: done
<6>[ 0.919379] vcodec_service: init success
<6>[ 0.919445] vcodec_service: probe device ff9c0000.hevc_service
<6>[ 0.919782] vcodec_service: ff9c0000.hevc_service: power on
<6>[ 0.919840] vcodec_service: probe device ff9c0000.hevc_service
<6>[ 0.919853] vcodec_service: checking hw id 6867
<6>[ 0.920426] vcodec_service: ff9c0000.hevc_service: power off...
<6>[ 0.920467] vcodec_service: done
<6>[ 0.920475] vcodec_service: init success
<4>[ 0.920612] rknandbase v1.0 2014-03-31
<4>[ 0.920747] rknand: probe of ff400000.nandc failed with error -1
<4>[ 0.920861] rknand_driver:ret = 0
<6>[ 0.922042] audit: initializing netlink socket (disabled)
<5>[ 0.922093] type=2000 audit(0.420:1): initialized
<4>[ 0.922899] bounce pool size: 64 pages
<6>[ 0.927461] fuse init (API version 7.22)
<6>[ 0.927836] msgmni has been set to 952
<7>[ 0.927885] SELinux: Registering netfilter hooks
<6>[ 0.929683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
<6>[ 0.929700] io scheduler noop registered
<6>[ 0.929709] io scheduler deadline registered
<6>[ 0.929801] io scheduler cfq registered (default)
<7>[ 0.930478] of_get_named_gpio_flags exited with status 262
<6>[ 0.931362] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.
<4>[ 0.932043] IEP Power ON
<4>[ 0.932085] iep ion client create success!
<6>[ 0.932526] rk_iommu ff900800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1eaae000
<4>[ 0.932537] IEP Power OFF
<4>[ 0.932555] IEP Driver loaded succesfully
<4>[ 0.932653] Module initialized.
<6>[ 0.933492] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
<6>[ 0.933510] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
<6>[ 0.934872] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
<6>[ 0.934890] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
<3>[ 0.935173] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
<3>[ 0.935188] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
<4>[ 0.935197] pwm_regulator_probe:error
<6>[ 0.935218] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
<4>[ 0.935411] rk_serial.c v1.8 2014-03-04
<6>[ 0.935635] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
<6>[ 0.935819] serial ff180000.serial: membase e2192000
<6>[ 0.935999] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 88) is a rk29_serial.1
<6>[ 0.936172] serial ff190000.serial: membase e219c000
<6>[ 0.936319] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
<4>[ 0.936407] 2, baud is:115200
<6>[ 0.938054] console [ttyS2] enabled
<6>[ 0.938219] serial ff690000.serial: membase fed60000
<6>[ 0.938442] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 90) is a rk29_serial.3
<6>[ 0.938622] serial ff1b0000.serial: membase e219e000
<6>[ 0.941426] loop: module loaded
<6>[ 0.941797] zram: Created 1 device(s) ...
<4>[ 0.941878] i2c-core: driver [mpu6050B1] using legacy suspend method
<4>[ 0.941890] i2c-core: driver [mpu6050B1] using legacy resume method
<6>[ 0.941908] mpu_init: Probe name mpu6050B1
<6>[ 0.942072] ak8963_mod_init: Probe name ak8963_mod
<6>[ 0.942815] SCSI Media Changer driver v0.25
<6>[ 0.943133] tun: Universal TUN/TAP device driver, 1.6
<4>[ 0.943278] vmac_init.
<3>[ 0.943850] stmmac_probe_config_dt: Can not read property: pmu_regulator.
<6>[ 0.943867] stmmac_probe_config_dt: clock input/output? (input).
<6>[ 0.943880] stmmac_probe_config_dt: TX delay(0x30).
<6>[ 0.943892] stmmac_probe_config_dt: RX delay(0x20).
<7>[ 0.943905] of_get_named_gpio_flags: can't parse gpios property
<7>[ 0.943921] of_get_named_gpio_flags exited with status 136
<7>[ 0.943930] of_get_named_gpio_flags: can't parse gpios property
<6>[ 0.943940] stmmac_probe_config_dt: is rockchip,rk3288-gmac
<6>[ 0.943951] stmmc_pltfr_init:
<3>[ 0.943960] stmmc_pltfr_init: ERROR: Get power-gpio failed.
<7>[ 0.943974] _gpio_request: gpio-136 (gmac_phy_reset) status -16
<3>[ 0.943982] gmac_phy_reset: ERROR: Request pin stmmc_pltfr_init failed.
<6>[ 0.943994] stmmc_pltfr_init: init for RGMII
<6>[ 0.944005] tx delay=0x30
<6>[ 0.944005] rx delay=0x20
<6>[ 0.944021] tx delay=0x30
<6>[ 0.944021] rx delay=0x20
<6>[ 0.944486] stmmac - user ID: 0x10, Synopsys ID: 0x35
<6>[ 0.944498] Normal descriptors
<6>[ 0.944507] Ring mode enabled
<6>[ 0.944518] DMA HW capability register supported
<6>[ 0.944531] RX Checksum Offload Engine supported (type 2)
<6>[ 0.944541] TX Checksum insertion supported
<6>[ 0.944550] Wake-Up On Lan supported
<6>[ 0.944606] Enable RX Mitigation via HW Watchdog Timer
<6>[ 0.945031] PPP generic driver version 2.4.2
<6>[ 0.945188] PPP BSD Compression module registered
<6>[ 0.945202] PPP Deflate Compression module registered
<6>[ 0.945224] PPP MPPE Compression module registered
<6>[ 0.945237] NET: Registered protocol family 24
<6>[ 0.945274] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[ 0.945288] CSLIP: code copyright 1989 Regents of the University of California.
<4>[ 0.945301] Rockchip WiFi SYS interface (V1.00) ...
<4>[ 0.945342] esp_mem_init enter date May 14 2017 21:45:41
<4>[ 0.945353] esp_mem_init VERSION [V2.5]
<4>[ 0.945397] esp_mem_init complete
<6>[ 0.945481] usbcore: registered new interface driver catc
<6>[ 0.945523] usbcore: registered new interface driver kaweth
<6>[ 0.945538] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
<6>[ 0.945578] usbcore: registered new interface driver pegasus
<6>[ 0.945618] usbcore: registered new interface driver rtl8150
<6>[ 0.945658] usbcore: registered new interface driver r8152
<6>[ 0.945669] hso: drivers/net/usb/hso.c: Option Wireless
<6>[ 0.945733] usbcore: registered new interface driver hso
<6>[ 0.945785] usbcore: registered new interface driver asix
<6>[ 0.945827] usbcore: registered new interface driver ax88179_178a
<6>[ 0.945867] usbcore: registered new interface driver cdc_ether
<6>[ 0.945906] usbcore: registered new interface driver cdc_eem
<6>[ 0.945945] usbcore: registered new interface driver dm9601
<6>[ 0.945983] usbcore: registered new interface driver dm9620
<6>[ 0.946039] usbcore: registered new interface driver smsc75xx
<6>[ 0.946087] usbcore: registered new interface driver smsc95xx
<6>[ 0.946128] usbcore: registered new interface driver gl620a
<6>[ 0.946168] usbcore: registered new interface driver net1080
<6>[ 0.946208] usbcore: registered new interface driver plusb
<6>[ 0.946249] usbcore: registered new interface driver rndis_host
<6>[ 0.946289] usbcore: registered new interface driver cdc_subset
<6>[ 0.946333] usbcore: registered new interface driver zaurus
<6>[ 0.946376] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[ 0.946441] usbcore: registered new interface driver int51x1
<6>[ 0.946482] usbcore: registered new interface driver kalmia
<6>[ 0.946523] usbcore: registered new interface driver ipheth
<6>[ 0.946566] usbcore: registered new interface driver sierra_net
<6>[ 0.946606] usbcore: registered new interface driver cx82310_eth
<6>[ 0.946664] usbcore: registered new interface driver cdc_ncm
<6>[ 0.946706] usbcore: registered new interface driver qmi_wwan
<6>[ 0.946747] usbcore: registered new interface driver cdc_mbim
<6>[ 0.946761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.949217] EHCI: ehci_rk_probe e2240000 e2240010
<6>[ 0.949236] rockchip_ehci_host ff500000.usb: EHCI Host Controller
<6>[ 0.949267] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
<6>[ 0.949614] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
<6>[ 0.967907] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
<6>[ 0.968007] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.968025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.968040] usb usb1: Product: EHCI Host Controller
<6>[ 0.968053] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
<6>[ 0.968066] usb usb1: SerialNumber: ff500000.usb
<6>[ 0.968525] hub 1-0:1.0: USB hub found
<6>[ 0.968554] hub 1-0:1.0: 1 port detected
<6>[ 0.968721] EHCI: ehci_rk_probe ok
<6>[ 0.968827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.969135] usbcore: registered new interface driver cdc_acm
<6>[ 0.969148] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 0.969205] usbcore: registered new interface driver usblp
<6>[ 0.969249] usbcore: registered new interface driver cdc_wdm
<6>[ 0.969317] usbcore: registered new interface driver usb-storage
<6>[ 0.969359] usbcore: registered new interface driver ums-alauda
<6>[ 0.969399] usbcore: registered new interface driver ums-cypress
<6>[ 0.969439] usbcore: registered new interface driver ums-datafab
<6>[ 0.969484] usbcore: registered new interface driver ums_eneub6250
<6>[ 0.969524] usbcore: registered new interface driver ums-freecom
<6>[ 0.969564] usbcore: registered new interface driver ums-isd200
<6>[ 0.969605] usbcore: registered new interface driver ums-jumpshot
<6>[ 0.969644] usbcore: registered new interface driver ums-karma
<6>[ 0.969683] usbcore: registered new interface driver ums-onetouch
<6>[ 0.969724] usbcore: registered new interface driver ums-sddr09
<6>[ 0.969764] usbcore: registered new interface driver ums-sddr55
<6>[ 0.969804] usbcore: registered new interface driver ums-usbat
<6>[ 0.969904] usbcore: registered new interface driver usbserial
<6>[ 0.969946] usbcore: registered new interface driver usbserial_generic
<6>[ 0.969980] usbserial: USB Serial support registered for generic
<6>[ 0.970022] usbcore: registered new interface driver option
<6>[ 0.970055] usbserial: USB Serial support registered for GSM modem (1-port)
<6>[ 0.970132] usbcore: registered new interface driver trancevibrator
<6>[ 0.970145] usb20_otg: version 3.10a 21-DEC-2012
<4>[ 0.970592] e2280040
<4>[ 0.970606] Core Release: 3.10a
<4>[ 0.970625] Setting default values for core params
<4>[ 0.970756] Using Buffer DMA mode
<4>[ 0.970768] Periodic Transfer Interrupt Enhancement - disabled
<4>[ 0.970778] Multiprocessor Interrupt Enhancement - disabled
<4>[ 0.970790] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[ 0.970800] ^^^^^^^^^^^^^^^^^Device Mode
<4>[ 0.970815] Dedicated Tx FIFOs mode
<4>[ 0.970834] pcd_init otg_dev = ddf9ed00
<6>[ 0.971006] usb20_otg ff580000.usb: DWC OTG Controller
<6>[ 0.971036] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
<6>[ 0.971068] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
<6>[ 0.971129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.971146] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.971161] usb usb2: Product: DWC OTG Controller
<6>[ 0.971174] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
<6>[ 0.971187] usb usb2: SerialNumber: ff580000.usb
<6>[ 0.971621] hub 2-0:1.0: USB hub found
<6>[ 0.971646] hub 2-0:1.0: 1 port detected
<6>[ 0.971959] usb20_host: version 3.10a 21-DEC-2012
<4>[ 0.974488] e2300040
<4>[ 0.974501] Core Release: 3.10a
<4>[ 0.974512] Setting default values for core params
<4>[ 0.974622] Using Buffer DMA mode
<4>[ 0.974634] Periodic Transfer Interrupt Enhancement - disabled
<4>[ 0.974645] Multiprocessor Interrupt Enhancement - disabled
<4>[ 0.974657] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[ 0.974667] ^^^^^^^^^^^^^^^^^^Host Mode
<6>[ 0.974692] usb20_host ff540000.usb: DWC OTG Controller
<6>[ 0.974726] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
<6>[ 0.974762] usb20_host ff540000.usb: irq 57, io mem 0x00000000
<4>[ 0.974855] Init: Power Port (0)
<6>[ 0.974911] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.974928] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.974943] usb usb3: Product: DWC OTG Controller
<6>[ 0.974955] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
<6>[ 0.974968] usb usb3: SerialNumber: ff540000.usb
<6>[ 0.975396] hub 3-0:1.0: USB hub found
<6>[ 0.975419] hub 3-0:1.0: 1 port detected
<6>[ 0.976143] usbcore: registered new interface driver xpad
<6>[ 0.976204] usbcore: registered new interface driver usb_acecad
<6>[ 0.976252] usbcore: registered new interface driver aiptek
<6>[ 0.976299] usbcore: registered new interface driver gtco
<6>[ 0.976349] usbcore: registered new interface driver hanwang
<6>[ 0.976396] usbcore: registered new interface driver kbtab
<6>[ 0.976455] usbcore: registered new interface driver wacom
<4>[ 0.976467] ==gsl_ts_init==
<4>[ 0.976528] ret=0
<4>[ 0.976805] sensor_register_slave:mma8452,id=17
<4>[ 0.976820] sensor_register_slave:gs_mc3230,id=23
<4>[ 0.976831] gsensor_init
<4>[ 0.976841] sensor_register_slave:mpu6880_acc,id=24
<4>[ 0.976853] sensor_register_slave:mpu6500_acc,id=25
<4>[ 0.976864] sensor_register_slave:cm3217,id=48
<4>[ 0.976875] sensor_register_slave:cm3218,id=49
<3>[ 0.977099] .. rk pwm remotectl v1.1 init
<6>[ 0.977338] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
<6>[ 0.979911] rtc_hym8563 0-0051: clock/calendar information is no longer guaranteed
<7>[ 0.980894] of_get_named_gpio_flags exited with status 228
<6>[ 0.982896] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
<6>[ 0.982942] i2c /dev entries driver
<6>[ 0.983615] IR NEC protocol handler initialized
<6>[ 0.983629] IR RC5(x) protocol handler initialized
<6>[ 0.983640] IR RC6 protocol handler initialized
<6>[ 0.983649] IR JVC protocol handler initialized
<6>[ 0.983659] IR Sony protocol handler initialized
<6>[ 0.983669] IR RC5 (streamzap) protocol handler initialized
<6>[ 0.983680] IR SANYO protocol handler initialized
<6>[ 0.983689] IR MCE Keyboard/mouse protocol handler initialized
<6>[ 0.983849] usbcore: registered new interface driver uvcvideo
<6>[ 0.983862] USB Video Class driver (1.1.1)
<4>[ 0.983874] CamSys driver version: v0.32.0, CamSys head file version: v0.11.0
<7>[ 0.985410] of_get_named_gpio_flags exited with status 236
<4>[ 0.985423] D1:camsys_platform_probe(1300): 1-gpios-cifpower: gpio=236
<7>[ 0.985438] of_get_named_gpio_flags exited with status 236
<4>[ 0.985447] D1:camsys_platform_probe(1303): gpios-cifpower: gpio_request
<4>[ 0.985469] D1:camsys_platform_probe(1305): 1-gpios-cifpower: gpio_request=0
<4>[ 0.985490] D1:camsys_platform_probe(1314): gpios-cifpower: 236 high
<4>[ 0.985532] D1:camsys_mipiphy_probe_cb(115): compatible is rockchip,rk3288
<4>[ 0.985532]
<4>[ 0.985606] D1:camsys_mipiphy_probe_cb(186): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
<4>[ 0.985757] D1:camsys_mipiphy_probe_cb(183): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xe21f8000 size: 0x4000)
<4>[ 0.986401] D1:camsys_platform_probe(1447): ff910000.isp memory:
<4>[ 0.986420] D1:camsys_platform_probe(1457): Register memory (phy: 0xff910000 vir: 0xe2220000 size: 0x10000)
<4>[ 0.986437] D1:camsys_platform_probe(1452): I2c memory (phy: 0x1df17000 vir: 0xddf17000 size: 0x1000)
<4>[ 0.986452] D1:camsys_init_ext_fsh_module(20): init external flash module
<4>[ 0.986465] D1:camsys_platform_probe(1472): Probe ff910000.isp device success
<6>[ 0.986909] test power disabled
<4>[ 0.986963] i2c-core: driver [bq27320] using legacy suspend method
<4>[ 0.986975] i2c-core: driver [bq27320] using legacy resume method
<4>[ 0.987323] rockchip_temp_probe,line=364
<6>[ 1.046622] tsadc ff280000.tsadc: initialized
<6>[ 1.047004] device-mapper: uevent: version 1.0.3
<6>[ 1.047244] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised:
dm-devel@redhat.com<6>[ 1.047548] Bluetooth: HCI UART driver ver 2.2
<6>[ 1.047564] Bluetooth: HCI H4 protocol initialized
<6>[ 1.047575] Bluetooth: HCILL protocol initialized
<6>[ 1.047587] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.21
<6>[ 1.047599] rtk_btusb: Register usb char device interface for BT driver
<6>[ 1.047782] usbcore: registered new interface driver rtk_btusb
<4>[ 1.048420] DVFS WARNING: clk_enable_dvfs: clk(aclk_vio1) freq table all value are smaller than default(546000), use default, just enable dvfs
<4>[ 1.052497] cpufreq version 1.0, suspend freq 1200 MHz
<6>[ 1.052691] cpuidle: using governor ladder
<6>[ 1.052705] cpuidle: using governor menu
<6>[ 1.052747] Synopsys Designware Multimedia Card Interface Driver
<6>[ 1.052759] MHSC version = Ver 2.00 2015-06-10
<4>[ 1.053061] dw cru_regsbase addr 0x1d8.
<4>[ 1.053073] dw cru_reset_offset val 3.
<6>[ 1.053089] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
<3>[ 1.053134] dwmmc_rockchip ff0f0000.rksdmmc: failed to get hpclk_mmc
<6>[ 1.053448] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
<4>[ 1.053624] dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
<7>[ 1.053654] of_get_named_gpio_flags: can't parse gpios property
<4>[ 1.053751] 1358..dw_mci_set_ios: no card. [mmc0]
<4>[ 1.066350] 1358..dw_mci_set_ios: no card. [mmc0]
<4>[ 1.086022] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
<6>[ 1.086049] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
<6>[ 1.086075] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
<4>[ 1.086402] dw cru_regsbase addr 0x1d8.
<4>[ 1.086415] dw cru_reset_offset val 0.
<6>[ 1.086429] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
<3>[ 1.086470] dwmmc_rockchip ff0c0000.rksdmmc: failed to get hpclk_mmc
<6>[ 1.087192] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
<4>[ 1.087351] dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
<7>[ 1.087392] of_get_named_gpio_flags: can't parse gpios property
<4>[ 1.087865] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
<4>[ 1.087940] 1358..dw_mci_set_ios: no card. [mmc1]
<4>[ 1.105660] 1358..dw_mci_set_ios: no card. [mmc1]
<6>[ 1.118129] mmc0: BKOPS_EN bit is not set
<4>[ 1.120001] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
<6>[ 1.122281] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
<4>[ 1.122304] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
<6>[ 1.122323] [mmc0] tuning regsbase addr 0x218.
<3>[ 1.123061] [mmc0] Data transmission error !!!! MINTSTS: [0x00002000]
<3>[ 1.123072] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
<3>[ 1.123091] dwmmc_rockchip ff0f0000.rksdmmc: data FIFO error (status=00002000)
<3>[ 1.123117] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-5
<3>[ 1.123142] [mmc0] Data transmission error !!!! MINTSTS: [0x00000088]
<3>[ 1.123151] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
<3>[ 1.123180] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
<3>[ 1.123226] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-248 (23 len)
<3>[ 1.123238] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 282-282 (1 len)
<3>[ 1.123250] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-248 (23 len)
<3>[ 1.123259] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 124
<6>[ 1.123302] mmc0: new HS200 MMC card at address 0001
<6>[ 1.123563] mmcblk0: mmc0:0001 AJNB4R 14.5 GiB
<6>[ 1.123873] uboot: 0x000400000 -- 0x000800000 (4 MB)
<6>[ 1.123884] misc: 0x000800000 -- 0x000c00000 (4 MB)
<6>[ 1.123894] resource: 0x000c00000 -- 0x001c00000 (16 MB)
<6>[ 1.123902] kernel: 0x001c00000 -- 0x002c00000 (16 MB)
<6>[ 1.123910] boot: 0x002c00000 -- 0x004c00000 (32 MB)
<6>[ 1.123919] recovery: 0x004c00000 -- 0x006c00000 (32 MB)
<6>[ 1.123928] backup: 0x006c00000 -- 0x00a000000 (52 MB)
<6>[ 1.123936] cache: 0x00a000000 -- 0x012000000 (128 MB)
<6>[ 1.123944] kpanic: 0x012000000 -- 0x012400000 (4 MB)
<6>[ 1.123952] system: 0x012400000 -- 0x072400000 (1536 MB)
<6>[ 1.123961] metadata: 0x072400000 -- 0x073400000 (16 MB)
<6>[ 1.123969] baseparamer: 0x073400000 -- 0x073800000 (4 MB)
<6>[ 1.123977] userdata: 0x073800000 -- 0x0f3800000 (2048 MB)
<6>[ 1.123986] radical_update: 0x0b7800000 -- 0x0bb800000 (64 MB)
<6>[ 1.123994] user: 0x0bb800000 -- 0x3a3a00000 (11906 MB)
<6>[ 1.125384] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
<6>[ 1.125397] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
<6>[ 1.124018] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p151358..dw_mci_set_ios: no card. [mmc1]
<4>[ 1.125715] dw cru_regsbase addr 0x1d8.
<4>[ 1.125723] dw cru_reset_offset val 1.
<6>[ 1.125733] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
<3>[ 1.125773] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
<6>[ 1.125997] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
<4>[ 1.126128] dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
<7>[ 1.126149] of_get_named_gpio_flags: can't parse gpios property
<4>[ 1.126404] 1358..dw_mci_set_ios: no card. [mmc2]
<4>[ 1.145012] 1358..dw_mci_set_ios: no card. [mmc2]
<4>[ 1.164720] 1358..dw_mci_set_ios: no card. [mmc2]
<6>[ 1.164737] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
<6>[ 1.164749] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
<4>[ 1.165028] leds-gpio leds.28: pins are not configured from the driver
<7>[ 1.165048] of_get_named_gpio_flags exited with status 257
<7>[ 1.165056] of_get_named_gpio_flags exited with status 258
<7>[ 1.165065] of_get_named_gpio_flags exited with status 17
<7>[ 1.165073] of_get_named_gpio_flags exited with status 257
<7>[ 1.165149] of_get_named_gpio_flags exited with status 258
<7>[ 1.165205] of_get_named_gpio_flags exited with status 17
<6>[ 1.165305] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 1.166757] usbcore: registered new interface driver usbhid
<6>[ 1.166768] usbhid: USB HID core driver
<6>[ 1.166886] ashmem: initialized
<6>[ 1.167007] logger: created 256K log 'log_main'
<6>[ 1.167101] logger: created 256K log 'log_events'
<6>[ 1.167199] logger: created 256K log 'log_radio'
<6>[ 1.167294] logger: created 256K log 'log_system'
<7>[ 1.168140] of_get_named_gpio_flags exited with status 5
<7>[ 1.168150] of_get_named_gpio_flags exited with status 5
<6>[ 1.168386] input: rk29-keypad as /devices/ff100000.adc/key.30/input/input1
<3>[ 1.169230] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ff890000.rockchip-i2s; cannot claim for 2-0010
<3>[ 1.169247] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
<3>[ 1.169258] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
<3>[ 1.169269] ES8323 2-0010: Error applying setting, reverse things back
<7>[ 1.169294] of_get_named_gpio_flags exited with status 10
<7>[ 1.169305] of_get_named_gpio_flags exited with status 239
<4>[ 1.169560] es8323 probe i2c recv ok
<6>[ 1.170494] rockchip-spdif ff880000.rockchip-spdif: spdif ready.
<4>[ 1.171075] es8323_probe
<4>[ 1.804660] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
<3>[ 1.804674] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
<4>[ 1.804683] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
<3>[ 1.804691] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
<4>[ 1.804700] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
<3>[ 1.804707] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
<4>[ 1.804716] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
<3>[ 1.804723] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
<4>[ 1.804731] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
<3>[ 1.804738] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
<4>[ 1.804746] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
<3>[ 1.804753] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
<4>[ 1.804761] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
<3>[ 1.804768] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
<4>[ 1.804776] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
<3>[ 1.804782] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
<4>[ 1.804791] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
<3>[ 1.804798] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
<4>[ 1.804807] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
<3>[ 1.804813] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
<4>[ 1.804821] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
<3>[ 1.804828] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
<4>[ 1.804836] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
<3>[ 1.804843] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
<4>[ 1.804852] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
<3>[ 1.804859] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
<4>[ 1.804867] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
<3>[ 1.804874] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
<4>[ 1.804882] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
<3>[ 1.804889] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
<4>[ 1.804897] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
<3>[ 1.804905] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
<4>[ 1.804924] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
<3>[ 1.804932] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
<4>[ 1.804940] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
<3>[ 1.804947] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
<4>[ 1.804955] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
<3>[ 1.804963] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
<4>[ 1.804971] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
<3>[ 1.804978] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
<4>[ 1.804987] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
<3>[ 1.804994] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
<4>[ 1.805002] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
<3>[ 1.805009] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
<3>[ 1.805128] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
<3>[ 1.805139] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
<3>[ 1.805148] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
<3>[ 1.805157] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
<3>[ 1.805174] ES8323 2-0010: ASoC: mux Differential Mux has no paths
<6>[ 1.811297] rockchip-es8323 rockchip-es8323.27: ES8323 HiFi <-> ff890000.rockchip-i2s mapping ok
<6>[ 1.811666] input: RK_ES8323 Headphone Jack as /devices/rockchip-es8323.27/sound/card0/input2
<6>[ 1.812043] u32 classifier
<6>[ 1.812050] Actions configured
<6>[ 1.812060] Netfilter messages via NETLINK v0.30.
<6>[ 1.812110] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[ 1.812369] ctnetlink v0.93: registering with nfnetlink.
<6>[ 1.812429] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 1.812435] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 1.812657] xt_time: kernel timezone is -0000
<6>[ 1.812811] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.812914] arp_tables: (C) 2002 David S. Miller
<6>[ 1.812948] TCP: cubic registered
<6>[ 1.812954] Initializing XFRM netlink socket
<6>[ 1.813118] NET: Registered protocol family 10
<6>[ 1.813540] mip6: Mobile IPv6
<6>[ 1.813560] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.813650] sit: IPv6 over IPv4 tunneling driver
<6>[ 1.813922] NET: Registered protocol family 17
<6>[ 1.813941] NET: Registered protocol family 15
<5>[ 1.813983] Bridge firewalling registered
<6>[ 1.813993] Ebtables v2.0 registered
<6>[ 1.814174] Bluetooth: RFCOMM TTY layer initialized
<6>[ 1.814211] Bluetooth: RFCOMM socket layer initialized
<6>[ 1.814217] Bluetooth: RFCOMM ver 1.11
<6>[ 1.814224] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 1.814229] Bluetooth: BNEP filters: protocol multicast
<6>[ 1.814238] Bluetooth: BNEP socket layer initialized
<6>[ 1.814244] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 1.814260] Bluetooth: HIDP socket layer initialized
<6>[ 1.814285] l2tp_core: L2TP core driver, V2.0
<6>[ 1.814296] l2tp_ppp: PPPoL2TP kernel driver, V2.0
<6>[ 1.814302] [WLAN_RFKILL]: Enter rfkill_wlan_init
<6>[ 1.814498] [WLAN_RFKILL]: Enter rfkill_wlan_probe
<6>[ 1.814509] [WLAN_RFKILL]: can't find rockchip,grf property
<6>[ 1.814515] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
<6>[ 1.814523] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
<6>[ 1.814530] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
<6>[ 1.814537] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
<7>[ 1.814551] of_get_named_gpio_flags exited with status 156
<6>[ 1.814556] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
<7>[ 1.814563] of_get_named_gpio_flags: can't parse gpios property
<7>[ 1.814569] of_get_named_gpio_flags exited with status 158
<6>[ 1.814574] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
<6>[ 1.814581] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
<6>[ 1.814607] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
<6>[ 1.814614] [WLAN_RFKILL]: Exit rfkill_wlan_probe
<6>[ 1.814652] [BT_RFKILL]: Enter rfkill_rk_init
<7>[ 1.814761] of_get_named_gpio_flags exited with status 147
<6>[ 1.814767] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
<7>[ 1.814777] of_get_named_gpio_flags exited with status 263
<6>[ 1.814782] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 263.
<7>[ 1.814789] of_get_named_gpio_flags exited with status 157
<6>[ 1.814793] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
<7>[ 1.814800] of_get_named_gpio_flags exited with status 154
<6>[ 1.814804] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
<7>[ 1.814811] of_get_named_gpio_flags exited with status 159
<6>[ 1.814816] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
<6>[ 1.814854] [BT_RFKILL]: Request irq for bt wakeup host
<6>[ 1.814943] [BT_RFKILL]: ** disable irq
<6>[ 1.815006] [BT_RFKILL]: ap6335 device registered.
<4>[ 1.815596] rk3288_init_suspend
<4>[ 1.815606] rk3288_suspend_init enter
<4>[ 1.815807] rk3288_suspend_init: pm_ctrbits =200007
<4>[ 1.815832] gpio_get_dts_info suspend:4
<4>[ 1.815838] gpio_get_dts_info resume:4
<4>[ 1.815844] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
<4>[ 1.815866] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
<4>[ 1.815981] clks_gating_suspend_init:clkgt info ok
<5>[ 1.816056] Registering SWP/SWPB emulation handler
<6>[ 1.816351] ddrfreq: verion 1.2 20140526
<6>[ 1.816360] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
<6>[ 1.816368] ddrfreq: auto-freq=0
<6>[ 1.816373] ddrfreq: auto-freq-table[0] 240MHz
<6>[ 1.816377] ddrfreq: auto-freq-table[1] 324MHz
<6>[ 1.816382] ddrfreq: auto-freq-table[2] 456MHz
<6>[ 1.816387] ddrfreq: auto-freq-table[3] 528MHz
<6>[ 1.832674] regulator-dummy: disabling
<4>[ 1.832877] =======================================================
<4>[ 1.832885] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 1.832890] =======================================================
<4>[ 1.832896] WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
<4>[ 1.832941] dhd_module_init: in
<4>[ 1.832947] ======== bcm_wlan_set_plat_data ========
<6>[ 1.832952] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
<4>[ 1.832970] host_oob_irq: 196
<4>[ 1.832974] host_oob_irq_flags=4
<4>[ 1.832978] dhd_wifi_platform_load: Enter
<4>[ 1.832990] pcd_pullup, is_on 0
<4>[ 1.833001] Power-up adapter 'DHD generic adapter'
<4>[ 1.833019] wifi_platform_set_power = 1
<4>[ 1.833024] ======== PULL WL_REG_ON HIGH! ========
<6>[ 1.833026] file system registered
<6>[ 1.833034] [WLAN_RFKILL]: rockchip_wifi_power: 1
<6>[ 1.833039] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
<6>[ 1.833044] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
<6>[ 1.833488] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.833496] android_usb gadget: Number of LUNs=2
<6>[ 1.833502] lun0: LUN: removable file: (no medium)
<6>[ 1.833508] lun1: LUN: removable file: (no medium)
<6>[ 1.833634] android_usb gadget: android_usb ready
<6>[ 1.833698] sensor_init: Probe name sensors
<4>[ 1.833711] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
<6>[ 1.834237] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:00:01 UTC (1293883201)
<6>[ 1.839883] rockchip-spdif-card rockchip-spdif-card.26: rk-hdmi-spdif-hifi <-> ff880000.rockchip-spdif mapping ok
<6>[ 1.840526] usbcore: registered new interface driver snd-usb-audio
<6>[ 1.840535] ALSA device list:
<6>[ 1.840539] #0: RK_ES8323
<6>[ 1.840543] #1: RK-SPDIF-CARD
<4>[ 1.840775] 2, baud is:115200
<6>[ 1.840923] Freeing unused kernel memory: 356K (c0ba8000 - c0c01000)
<6>[ 1.932213] [WLAN_RFKILL]: wifi turn on power. 156
<7>[ 1.951824] SELinux: 2048 avtab hash slots, 5368 rules.
<7>[ 1.953352] SELinux: 2048 avtab hash slots, 5368 rules.
<7>[ 1.953370] SELinux: 1 users, 2 roles, 442 types, 0 bools, 1 sens, 1024 cats
<7>[ 1.953377] SELinux: 86 classes, 5368 rules
<7>[ 1.954121] SELinux: Completing initialization.
<7>[ 1.954126] SELinux: Setting up existing superblocks.
<7>[ 1.954141] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[ 1.954156] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[ 1.954206] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[ 1.954217] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[ 1.954229] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 1.954242] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
<7>[ 1.954393] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[ 1.964071] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[ 1.964085] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[ 1.964094] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[ 1.964103] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[ 1.964120] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[ 1.964166] SELinux: initialized (dev configfs, type configfs), not configured for labeling
<7>[ 1.964175] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 1.964193] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[ 2.090357] type=1403 audit(1293883201.750:2): policy loaded auid=4294967295 ses=4294967295
<11>[ 2.117636] init: invalid gid 'trace'
<4>[ 2.138870] wifi_platform_bus_enumerate device present 1
<4>[ 2.138887] ======== Card detection to detect SDIO card! ========
<6>[ 2.138900] mmc2:mmc host rescan start!
<11>[ 2.216226] init: /dev/hw_random not found
<6>[ 2.216304] keychord: using input dev ff680000.pwm for fevent
<6>[ 2.216319] keychord: using input dev rk29-keypad for fevent
<4>[ 2.216418] 2, baud is:115200
<7>[ 2.323782] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 2.324052] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.324330] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 2.325563] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.325721] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.326955] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<11>[ 2.328179] init: /dev/hw_random not found
<14>[ 2.329094] fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
<14>[ 2.329881] resize2fs: resize2fs 1.42.9 (28-Dec-2013)resize2fs: The filesystem is already 393216 blocks long. Nothing to do!resize2fs:
<4>[ 2.332291] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
<6>[ 2.336467] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 2.336498] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<14>[ 2.336563] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/system,/system,ext4)=0
<14>[ 2.337330] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
<14>[ 2.342353] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[ 2.342402] e2fsck: system: clean, 1882/84672 files, 115281/393216 blocks
<6>[ 2.346159] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<7>[ 2.346187] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<14>[ 2.346233] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/system,target=/system,type=ext4)=0
<6>[ 2.353100] EXT4-fs (mmcblk0p8): recovery complete
<6>[ 2.353462] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
<7>[ 2.353482] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr
<14>[ 2.353522] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0
<4>[ 2.353856] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
<4>[ 2.355338] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
<6>[ 2.357480] EXT4-fs (mmcblk0p11): recovery complete
<6>[ 2.357504] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 2.357525] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
<14>[ 2.357573] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,/metadata,ext4)=0
<14>[ 2.358316] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata
<14>[ 2.362567] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[ 2.362604] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks
<6>[ 2.366528] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
<7>[ 2.366553] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
<14>[ 2.366598] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0
<14>[ 2.366644] fs_mgr: Running /system/bin/fsck.f2fs -f /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
<14>[ 2.367504] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory
<14>[ 2.367542] fsck.f2fs: fsck.f2fs terminated by exit(255)
<14>[ 2.367791] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=f2fs)=-1
<4>[ 2.368138] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
<4>[ 2.390124] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[ 2.391647] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[ 2.393173] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[ 2.395905] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
<6>[ 2.449035] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
<4>[ 2.449063] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
<4>[ 2.449129] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc2]
<4>[ 2.450817] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
<6>[ 2.450845] mmc2: new high speed SDIO card at address 0001
<4>[ 2.467057] bcmsdh_register: register client driver
<4>[ 2.467184] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
<4>[ 2.467259] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
<4>[ 2.467272] bus num (host idx)=2, slot num (rca)=1
<4>[ 2.467281] found adapter info 'DHD generic adapter'
<4>[ 2.467524] F1 signature read @0x18000000=0x16224335
<4>[ 2.469539] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
<4>[ 2.469848] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[ 2.469898] wifi_platform_get_mac_addr
<4>[ 2.469909] ======== bcm_wlan_get_mac_address ========
<6>[ 2.469924] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
<6>[ 2.469950] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
<6>[ 2.469962] [WLAN_RFKILL]: This mac address is not valid, ignored...
<4>[ 2.469977] dhd_conf_set_chiprev: chip=0x4339, chiprev=1
<4>[ 2.470021] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txt
<4>[ 2.470377] wl_create_event_handler(): thread:wl_event_handler:8a started
<4>[ 2.470383] tsk Enter, tsk = 0xc5bc149c
<4>[ 2.470549] dhd_attach(): thread:dhd_watchdog_thread:8b started
<4>[ 2.470595] dhd_attach(): thread:dhd_dpc:8c started
<4>[ 2.470605] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
<4>[ 2.470663] dhd_attach(): thread:dhd_rxf:8d started
<4>[ 2.470680] dhd_deferred_work_init: work queue initialized
<4>[ 2.470821] dhdsdio_probe_init: set use_rxchain 1 from config.txt
<4>[ 2.486202] Dongle Host Driver, version 1.201.59.5 (r506368)
<4>[ 2.486202] Compiled in drivers/net/wireless/bcmdhd on May 14 2017 at 21:45:55
<4>[ 2.487126] Register interface [wlan0] MAC: e0:76:d0:f0:a7:b9
<4>[ 2.487126]
<4>[ 2.487149] dhd_prot_ioctl : bus is down. we have nothing to do
<4>[ 2.487190] bcmsdh_oob_intr_unregister: Enter
<4>[ 2.487201] bcmsdh_oob_intr_unregister: irq is not registered
<4>[ 2.487215] dhd_txglom_enable: enable 0
<4>[ 2.487223] dhd_bus_devreset: WLAN OFF DONE
<4>[ 2.487259] wifi_platform_set_power = 0
<4>[ 2.487269] ======== PULL WL_REG_ON LOW! ========
<6>[ 2.487277] [WLAN_RFKILL]: rockchip_wifi_power: 0
<6>[ 2.495622] EXT4-fs (mmcblk0p13): recovery complete
<6>[ 2.496027] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 2.496051] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr
<14>[ 2.496104] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,/data,ext4)=0
<14>[ 2.498772] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
<14>[ 2.503953] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[ 2.503991] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata: clean, 511/131072 files, 39732/524288 blocks
<6>[ 2.505825] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic
<7>[ 2.505851] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr
<14>[ 2.505891] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0
<11>[ 2.505912] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata on /data with fs_type=ext4 instead of f2fs
<7>[ 2.506571] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<6>[ 2.520162] arm_release_ver of this mali_ko is 'r6p0-02rel0', rk_ko_ver is '13', built at '09:15:10', on 'Oct 22 2015'.
<6>[ 2.520252] mali ffa30000.gpu: Continuing without Mali clock control
<4>[ 2.520295] mali pd enabled
<4>[ 2.520309] clk enabled
<4>[ 2.520322] MALI_DVFS_STEP = 4, div_dvfs = 10
<6>[ 2.520333] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
<6>[ 2.520343] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
<6>[ 2.520352] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
<6>[ 2.520362] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
<3>[ 2.520459] turn on mali power
<6>[ 2.520473] kbase_platform_rk_init,register_reboot_notifier
<4>[ 2.520515] hrtimer: interrupt took 11958 ns
<6>[ 2.520627] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
<6>[ 2.522891] mali ffa30000.gpu: Probed as mali0
<3>[ 2.523921] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
<3>[ 2.524562] rk29_ipp: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
<3>[ 2.525141] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
<6>[ 2.525905] zram0: detected capacity change from 0 to 533413888
<6>[ 2.573002] Adding 520908k swap on /dev/block/zram0. Priority:-1 extents:1 across:520908k SS
<6>[ 2.591497] [WLAN_RFKILL]: wifi shut off power.
<6>[ 2.591515] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
<6>[ 2.591522] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
<4>[ 2.591593] dhd_module_init: Exit err=0
<3>[ 2.606856] EXT4-fs (mmcblk0p13): Unrecognized mount option "background_gc=on" or missing value
<14>[ 2.615591] bat_cap: oldcap path is /sys/devices/ff100000.adc
<11>[ 2.615650] bat_cap: oldcap_path no exist
<6>[ 2.615830] binder: 150:150 transaction failed 29189, size 0-0
<11>[ 2.616329] init: Warning! Service displayd needs a SELinux domain defined; please fix!
<11>[ 2.620053] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<11>[ 2.620088] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<11>[ 2.620323] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
<6>[ 2.620834] rtk_btusb: btchr_open: BT usb char device is opening
<3>[ 2.620853] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
<6>[ 2.620871] rtk_btusb: btchr_open: BT usb char device is opening
<3>[ 2.620882] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
<6>[ 2.620906] rtk_btusb: btchr_open: BT usb char device is opening
<3>[ 2.620917] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
<6>[ 2.620931] rtk_btusb: btchr_open: BT usb char device is opening
<3>[ 2.620941] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
<4>[ 2.624931] 0,baud is:9600
<4>[ 2.625045] 1, baud is:115200
<4>[ 2.625183] 1, baud is:115200
<4>[ 2.625268] 0,baud is:9600
<4>[ 2.628879] 2, baud is:115200
<11>[ 2.629686] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
<11>[ 2.631301] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
<11>[ 2.631768] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
<11>[ 2.631987] init: Warning! Service drmservice needs a SELinux domain defined; please fix!
<11>[ 2.632240] init: cannot find '/system/bin/akmd', disabling 'akmd'
<7>[ 2.633296] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<3>[ 2.633852] android_usb: already disabled
<6>[ 2.636582] read descriptors
<6>[ 2.636597] read strings
<4>[ 2.636627] pcd_pullup, is_on 1
<38>[ 2.912916] logd.auditd: start
<4>[ 2.945736] dwc_otg_hcd_enable, enable host controller
<4>[ 3.068763] Using Buffer DMA mode
<4>[ 3.068775] Periodic Transfer Interrupt Enhancement - disabled
<4>[ 3.068780] Multiprocessor Interrupt Enhancement - disabled
<4>[ 3.068786] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[ 3.068791] ^^^^^^^^^^^^^^^^^^Host Mode
<6>[ 3.068803] EHCI: rk_ehci_hcd_enable, disable host controller
<4>[ 3.113127] Init: Power Port (0)
<4>[ 3.408254] Indeed it is in host mode hprt0 = 00021501
<6>[ 3.585385] usb 3-1: new high-speed USB device number 2 using usb20_host
<4>[ 3.585449] Indeed it is in host mode hprt0 = 00001101
<11>[ 3.600681] healthd: No charger supplies found
<12>[ 3.600694] healthd: No battery devices found
<6>[ 3.782364] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
<6>[ 3.782376] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>[ 3.782383] usb 3-1: Product: USB 2.0 Hub [MTT]
<6>[ 3.782862] hub 3-1:1.0: USB hub found
<6>[ 3.782920] hub 3-1:1.0: 4 ports detected
<6>[ 3.953049] rk3288-lcdc lcdc0: blank mode:0
<6>[ 5.162475] warning: `system_server' uses 32-bit capabilities (legacy support in use)
<4>[ 6.385192] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[ 6.385204] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[ 6.385211] D1:camsys_open(739): camsys_marvin(ddf05910) is opened!
<4>[ 6.385288] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
<4>[ 6.385300] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
<4>[ 6.385310] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
<7>[ 6.385326] of_get_named_gpio_flags exited with status 237
<7>[ 6.385331] of_get_named_gpio_flags exited with status 237
<4>[ 6.385335] rockchip_gpio_request:GPIO7-13
<4>[ 6.385344] rockchip_gpio_set:GPIO7-13 level = 1
<4>[ 6.385349] rockchip_gpio_direction_output:set GPIO7-13 level 1
<4>[ 6.385358] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x15
<4>[ 6.385366] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x207428,result=0x207428
<4>[ 6.385374] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
<4>[ 6.385393] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: OV13850) register success
<4>[ 6.390425] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
<4>[ 6.390434] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[ 6.390538] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[ 6.390561] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
<4>[ 6.391621] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
<4>[ 6.392685] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(79) set 1
<4>[ 6.393740] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 1
<3>[ 6.396957] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
<3>[ 6.398151] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
<4>[ 6.398231] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 0
<4>[ 6.398243] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(79) set 0
<4>[ 6.398258] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
<4>[ 6.399338] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
<4>[ 6.399372] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
<4>[ 6.401429] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
<4>[ 6.401444] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
<4>[ 6.401459] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[ 6.401465] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[ 6.401472] D1:camsys_release(763): camsys_marvin(ddf05910) is closed
<4>[ 6.409369] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[ 6.409381] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[ 6.409389] D1:camsys_open(739): camsys_marvin(ddf05910) is opened!
<4>[ 6.409519] D1:camsys_extdev_register(243): Get RK30_PIN3_PB4(108) gpio(active: 1) for dev_id 0x4000000 success!
<4>[ 6.409532] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x4000000 success!
<4>[ 6.409542] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x4000000 success!
<4>[ 6.409550] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
<4>[ 6.409639] D1:camsys_extdev_register(268): Extdev(dev_id: 0x4000000 dev_name: OV5640) register success
<4>[ 6.414675] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
<4>[ 6.414684] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[ 6.414788] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[ 6.414815] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
<4>[ 6.415876] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
<4>[ 6.416934] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(79) set 1
<4>[ 6.417990] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(108) set 0
<3>[ 6.422163] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!
<4>[ 6.422255] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(108) set 1
<4>[ 6.422266] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(79) set 0
<4>[ 6.422276] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
<4>[ 6.423359] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
<4>[ 6.423386] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
<4>[ 6.425436] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x4000000) is deregister success
<4>[ 6.425449] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
<4>[ 6.425458] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[ 6.425464] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[ 6.425470] D1:camsys_release(763): camsys_marvin(ddf05910) is closed
<4>[ 6.428923] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[ 6.428934] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[ 6.428940] D1:camsys_open(739): camsys_marvin(ddf05910) is opened!
<4>[ 6.429021] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
<4>[ 6.429047] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: TC358749XBG) register success
<4>[ 6.434100] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
<4>[ 6.434112] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[ 6.434216] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[ 6.434248] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
<3>[ 6.435558] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
<3>[ 6.436627] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
<3>[ 6.437698] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<3>[ 6.441061] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<3>[ 6.441080] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
<3>[ 6.441087] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
<4>[ 6.442198] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
<4>[ 6.442237] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
<4>[ 6.444303] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
<4>[ 6.444317] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[ 6.444323] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[ 6.444329] D1:camsys_release(763): camsys_marvin(ddf05910) is closed
<38>[ 6.446602] type=1400 audit(1293883206.170:3): avc: denied { execute } for pid=487 comm="mediaserver" name="sh" dev="mmcblk0p10" ino=317 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
<38>[ 6.447233] type=1400 audit(1293883206.170:4): avc: denied { read open } for pid=487 comm="mediaserver" path="/system/bin/sh" dev="mmcblk0p10" ino=317 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
<38>[ 6.447339] type=1400 audit(1293883206.170:5): avc: denied { execute_no_trans } for pid=487 comm="mediaserver" path="/system/bin/sh" dev="mmcblk0p10" ino=317 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
<38>[ 6.448944] type=1400 audit(1293883206.180:6): avc: denied { getattr } for pid=487 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
<38>[ 6.449059] type=1400 audit(1293883206.180:7): avc: denied { execute } for pid=487 comm="sh" name="toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
<38>[ 6.449164] type=1400 audit(1293883206.180:8): avc: denied { read open } for pid=487 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
<38>[ 6.449237] type=1400 audit(1293883206.180:9): avc: denied { execute_no_trans } for pid=487 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
<12>[ 7.903652] healthd: battery none chg=
<6>[ 8.050992] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[ 8.051012] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[ 8.051018] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[ 8.051023] lowmemorykiller: oom_adj 2 => oom_score_adj 117
<6>[ 8.051027] lowmemorykiller: oom_adj 3 => oom_score_adj 176
<6>[ 8.051033] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[ 8.051037] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<6>[ 8.414701] acc_open
<6>[ 8.414729] acc_release
<4>[ 8.537950] phy_power_on: enable = 1
<4>[ 8.577402] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
<4>[ 8.577449] eth0: device MAC address c2:92:d7:11:27:6c
<6>[ 8.581812] libphy: stmmac: probed
<6>[ 8.581825] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
<6>[ 8.581832] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
<6>[ 8.849755] [otg id chg] last id -1 current id 1
<4>[ 8.849779] PortPower off
<4>[ 8.849788] rk_battery_charger_detect_cb , battery_charger_detect 6
<4>[ 8.953759] Using Buffer DMA mode
<4>[ 8.953780] Periodic Transfer Interrupt Enhancement - disabled
<4>[ 8.953787] Multiprocessor Interrupt Enhancement - disabled
<4>[ 8.953794] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[ 8.953801] ^^^^^^^^^^^^^^^^^Device Mode
<4>[ 9.058407] es8323_mic_state_ctrl read: 0
<4>[ 9.058428] mic_state_switch 0
<4>[ 9.058435] hp_det = 0,insert hp
<4>[ 9.058440] hp mic use intern
<4>[ 9.440140] ***************vbus detect*****************
<4>[ 9.442333] rk_battery_charger_detect_cb , battery_charger_detect 1
<3>[ 9.450158] FAT-fs (mmcblk0p15): error, fat_get_cluster: invalid cluster chain (i_pos 1)
<3>[ 9.450175] FAT-fs (mmcblk0p15): Filesystem has been set read-only
<4>[ 9.627405] Using Buffer DMA mode
<4>[ 9.627423] Periodic Transfer Interrupt Enhancement - disabled
<4>[ 9.627429] Multiprocessor Interrupt Enhancement - disabled
<4>[ 9.627435] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[ 9.627440] ^^^^^^^^^^^^^^^^^Device Mode
<4>[ 9.627477] *******************soft connect!!!*******************
<4>[ 9.726304] USB RESET
<6>[ 9.766657] pm policy 0 -> 1
<6>[ 9.813054] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 9.836990] android_usb gadget: high-speed config #1: android
<6>[ 9.837123] android_work: sent uevent USB_STATE=CONFIGURED
<38>[ 11.129393] type=1400 audit(1293883210.930:10): avc: denied { write } for pid=1064 comm="Binder_2" name="/" dev="mmcblk0p13" ino=2 scontext=u:r:mediaserver:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
<38>[ 11.129686] type=1400 audit(1293883210.930:11): avc: denied { remove_name } for pid=1064 comm="Binder_2" name="vpumem_observer" dev="mmcblk0p13" ino=15 scontext=u:r:mediaserver:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
<38>[ 11.129808] type=1400 audit(1293883210.930:12): avc: denied { unlink } for pid=1064 comm="Binder_2" name="vpumem_observer" dev="mmcblk0p13" ino=15 scontext=u:r:mediaserver:s0 tcontext=u:object_r:system_data_file:s0 tclass=sock_file permissive=1
<38>[ 11.129883] type=1400 audit(1293883210.930:13): avc: denied { add_name } for pid=1064 comm="Binder_2" name="vpumem_observer" scontext=u:r:mediaserver:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
<38>[ 11.129952] type=1400 audit(1293883210.930:14): avc: denied { create } for pid=1064 comm="Binder_2" name="vpumem_observer" scontext=u:r:mediaserver:s0 tcontext=u:object_r:system_data_file:s0 tclass=sock_file permissive=1
<4>[ 11.130444] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[ 11.130453] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[ 11.130461] D1:camsys_open(739): camsys_marvin(ddf05910) is opened!
<4>[ 11.130710] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 420000000 Hz) in turn on
<4>[ 11.130722] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[ 11.130827] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[ 11.130836] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[ 11.131293] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[ 11.133353] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[ 11.407093] D1:camsys_mrv_iommu_cb(276): map fd 47 ,client fd 35
<4>[ 11.407093]
<6>[ 11.407133] rk_iommu ff914000.isp_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1eabe000
<4>[ 11.409137] D1:camsys_mrv_iommu_cb(276): map fd 48 ,client fd 35
<4>[ 11.409137]
<6>[ 11.409156] rk_iommu ff914000.isp_mmu: (isp_mmu) Already enabled
<4>[ 11.412185] D1:camsys_mrv_iommu_cb(276): map fd 49 ,client fd 35
<4>[ 11.412185]
<6>[ 11.412204] rk_iommu ff914000.isp_mmu: (isp_mmu) Already enabled
<4>[ 11.416553] D1:camsys_mrv_iommu_cb(276): map fd 50 ,client fd 35
<4>[ 11.416553]
<6>[ 11.416573] rk_iommu ff914000.isp_mmu: (isp_mmu) Already enabled
<4>[ 11.417153] D1:camsys_rk3288_mipihpy_cfg(104): mipi phy 0 standby!
<3>[ 11.417165] W:camsys_phy_ops(478): mipiphy->phy_index(-1195262044) != extdev->phy.info.mipi.phy_index(0)!
<4>[ 11.417378] D1:camsys_rk3288_mipihpy_cfg(219): mipi phy(0) turn on(lane: 0xf bit_rate: 648Mbps)
<4>[ 11.538430] D1:camsys_rk3288_mipihpy_cfg(104): mipi phy 0 standby!
<4>[ 11.538930] D1:camsys_mrv_iommu_cb(276): map fd 50 ,client fd 35
<4>[ 11.538930]
<6>[ 11.539035] rk_iommu ff914000.isp_mmu: (isp_mmu) 3 times left to be disabled
<3>[ 11.539045] rk_iommu ff914000.isp_mmu: rockchip_iommu_detach_device: Detaching IOMMU with pgtable 1eabe000 delayed
<4>[ 11.539342] D1:camsys_mrv_iommu_cb(276): map fd 49 ,client fd 35
<4>[ 11.539342]
<6>[ 11.539438] rk_iommu ff914000.isp_mmu: (isp_mmu) 2 times left to be disabled
<3>[ 11.539447] rk_iommu ff914000.isp_mmu: rockchip_iommu_detach_device: Detaching IOMMU with pgtable 1eabe000 delayed
<4>[ 11.539675] D1:camsys_mrv_iommu_cb(276): map fd 48 ,client fd 35
<4>[ 11.539675]
<6>[ 11.539770] rk_iommu ff914000.isp_mmu: (isp_mmu) 1 times left to be disabled
<3>[ 11.539779] rk_iommu ff914000.isp_mmu: rockchip_iommu_detach_device: Detaching IOMMU with pgtable 1eabe000 delayed
<4>[ 11.540025] D1:camsys_mrv_iommu_cb(276): map fd 47 ,client fd 35
<4>[ 11.540025]
<4>[ 13.106344] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
<4>[ 13.106388] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
<4>[ 13.106400] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[ 13.106408] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[ 13.106415] D1:camsys_release(763): camsys_marvin(ddf05910) is closed
<38>[ 14.483840] type=1400 audit(1293883214.340:15): avc: denied { write } for pid=1145 comm="chip.devicetest" name="force_usb_mode" dev="sysfs" ino=12618 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
<4>[ 14.490254] force_usb_mode_store 0->0
<6>[ 228.006906] stmmc_pltfr_fix_mac_speed: fix speed to 100
<6>[ 228.007044] stmmc_pltfr_fix_mac_speed: fix speed for RGMII
<6>[ 228.007129] libphy: stmmac-0:01 - Link is Up - 100/Full
<6>[ 281.496165] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<6>[ 916.777303] usb 3-1.3: new high-speed USB device number 3 using usb20_host
<6>[ 917.002691] usb 3-1.3: New USB device found, idVendor=0951, idProduct=1666
<6>[ 917.002889] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 917.003217] usb 3-1.3: Product: DataTraveler 3.0
<6>[ 917.003329] usb 3-1.3: Manufacturer: Kingston
<6>[ 917.003427] usb 3-1.3: SerialNumber: 408D5CBF5F0CB0A1F999CF73
<6>[ 917.010965] usb-storage 3-1.3:1.0: USB Mass Storage device detected
<6>[ 917.016704] scsi0 : usb-storage 3-1.3:1.0
<5>[ 919.003802] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
<5>[ 919.012662] sd 0:0:0:0: [sda] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB)
<5>[ 919.013989] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 919.014168] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
<5>[ 919.014222] sd 0:0:0:0: Attached scsi generic sg0 type 0
<3>[ 919.015387] sd 0:0:0:0: [sda] No Caching mode page found
<3>[ 919.015492] sd 0:0:0:0: [sda] Assuming drive cache: write through
<3>[ 919.024685] sd 0:0:0:0: [sda] No Caching mode page found
<3>[ 919.024749] sd 0:0:0:0: [sda] Assuming drive cache: write through
<6>[ 919.026187] sda: sda1
<3>[ 919.038090] sd 0:0:0:0: [sda] No Caching mode page found
<3>[ 919.038157] sd 0:0:0:0: [sda] Assuming drive cache: write through
<5>[ 919.038219] sd 0:0:0:0: [sda] Attached SCSI removable disk
<7>[ 919.104400] SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
<38>[ 920.682387] type=1400 audit(1497236558.344:16): avc: denied { execute } for pid=4159 comm="chip.devicetest" name="toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:system_app:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
<38>[ 920.682825] type=1400 audit(1497236558.344:17): avc: denied { read open } for pid=4159 comm="chip.devicetest" path="/system/bin/toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:system_app:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
<38>[ 920.683027] type=1400 audit(1497236558.344:18): avc: denied { execute_no_trans } for pid=4159 comm="chip.devicetest" path="/system/bin/toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:system_app:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
<38>[ 922.872432] type=1400 audit(1497236560.574:19): avc: denied { write } for pid=1145 comm="chip.devicetest" name="force_usb_mode" dev="sysfs" ino=12618 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
<4>[ 922.873563] force_usb_mode_store 0->0
