FirePrime不能点亮MiPi接口的屏，求协助，谢谢！

flowerking

1、修改了rk3128-fireprime.dts，屏蔽了HDMI，打开了lcdc
     &lcdc {  
     status = "okay";  
rockchip,mirror = <NO_MIRROR>;  
rockchip,cabc_mode = <0>;  
power_ctr: power_ctr {   
  rockchip,debug = <1>;   
  /*lcd_en:lcd_en {   
   rockchip,power_type = <GPIO>;   
   gpios = <&gpio7 GPIO_A3 GPIO_ACTIVE_HIGH>;   
   rockchip,delay = <10>;   
  };
  lcd_cs:lcd_cs {   
   rockchip,power_type = <GPIO>;   
   gpios = <&gpio7 GPIO_A4 GPIO_ACTIVE_HIGH>;   
   rockchip,delay = <10>;   
  };*/
   lcd_rst:lcd_rst {   
    rockchip,power_type = <GPIO>;   
    gpios = <&gpio1 GPIO_A7 GPIO_ACTIVE_HIGH>;   
    rockchip,delay = <10>;   
   };  
  };
};
2、在fireprime_defconfig增加了
     CONFIG_LCD_MIPI=y
CONFIG_MIPI_DSI=y
CONFIG_RK32_MIPI_DSI=y

3、增加了自己的mipi dtsi文件
4、错误如下：

[    0.883620] delay:10[    0.883620] atv_val:1[    0.883620] gpio:39[    0.883620] pwr_type:gpio[    0.883620] pwr_ctr_name:lcd_rst[    0.883591] rk312x-lcdc lcdc0: request lcd_rst gpio fail:-16[    0.882572] rk32-mipi 10110000.mipi: rockchip mipi_dsi v1.1 2014-06-17rk32-mipi 10110000.mipi: rk mipi_dsi probe success!
rk312x-lcdc lcdc0: set lcdc0 dclk failed

请问是什么原因？

flowerking

没有人可以提供协助吗？