|
|
发表于 2023-7-6 16:16:15
只看该作者
沙发
|DDR Version V1.13 20220218
In
ddrconfig:0
LPDDR4X, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -72ps, dqs3: -168ps,
change to: 324MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:24%, vrefout:41%
dram drv:40,odt:0
clk skew:0x63
change to: 528MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:24%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58
change to: 780MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:24%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58
change to: 1560MHz(final freq)
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:22%
dram drv:40,odt:80
vref_ca:00000071
clk skew:0x35
cs 0:
the read training result:
DQS0:0x37, DQS1:0x34, DQS2:0x3b, DQS3:0x30,
min :0x12 0x12 0x13 0xf 0x2 0x6 0x9 0x3 , 0xa 0x9 0x3 0x3 0xe 0x8 0xc 0x5 ,
0x16 0x14 0xe 0xd 0x4 0x1 0x3 0x4 , 0xc 0x9 0x7 0x2 0xc 0xc 0x9 0xe ,
mid :0x2f 0x2f 0x30 0x2c 0x1f 0x23 0x25 0x1f ,0x27 0x26 0x1b 0x1e 0x2a 0x24 0x27 0x21 ,
0x33 0x32 0x2b 0x2a 0x22 0x1f 0x20 0x21 ,0x28 0x25 0x22 0x1d 0x2a 0x29 0x25 0x2a ,
max :0x4c 0x4c 0x4e 0x49 0x3d 0x41 0x41 0x3c ,0x44 0x44 0x34 0x3a 0x47 0x41 0x42 0x3e ,
0x51 0x50 0x48 0x48 0x40 0x3d 0x3e 0x3f ,0x45 0x42 0x3e 0x38 0x48 0x47 0x42 0x47 ,
range:0x3a 0x3a 0x3b 0x3a 0x3b 0x3b 0x38 0x39 ,0x3a 0x3b 0x31 0x37 0x39 0x39 0x36 0x39 ,
0x3b 0x3c 0x3a 0x3b 0x3c 0x3c 0x3b 0x3b ,0x39 0x39 0x37 0x36 0x3c 0x3b 0x39 0x39 ,
the write training result:
DQS0:0x31, DQS1:0x22, DQS2:0x27, DQS3:0x14,
min :0x6b 0x6f 0x6f 0x6e 0x60 0x62 0x63 0x64 0x61 ,0x59 0x57 0x4e 0x50 0x5c 0x57 0x59 0x57 0x50 ,
0x63 0x63 0x5b 0x5c 0x54 0x4f 0x4f 0x55 0x54 ,0x4e 0x4c 0x48 0x47 0x50 0x50 0x4b 0x54 0x46 ,
mid :0x86 0x89 0x89 0x89 0x79 0x7c 0x7f 0x7d 0x7a ,0x75 0x73 0x68 0x6a 0x76 0x71 0x72 0x70 0x6a ,
0x7f 0x80 0x75 0x77 0x6e 0x69 0x6a 0x6f 0x6f ,0x69 0x67 0x62 0x61 0x6c 0x6b 0x66 0x6d 0x61 ,
max :0xa1 0xa4 0xa4 0xa4 0x93 0x97 0x9b 0x96 0x93 ,0x91 0x8f 0x82 0x85 0x91 0x8c 0x8c 0x89 0x84 ,
0x9c 0x9d 0x8f 0x92 0x89 0x84 0x85 0x89 0x8b ,0x85 0x83 0x7d 0x7b 0x89 0x87 0x81 0x87 0x7c ,
range:0x36 0x35 0x35 0x36 0x33 0x35 0x38 0x32 0x32 ,0x38 0x38 0x34 0x35 0x35 0x35 0x33 0x32 0x34 ,
0x39 0x3a 0x34 0x36 0x35 0x35 0x36 0x34 0x37 ,0x37 0x37 0x35 0x34 0x39 0x37 0x36 0x33 0x36 ,
CA Training result:
cs:0 min :0x5a 0x50 0x4c 0x45 0x4e 0x41 0x4d ,0x57 0x4d 0x4a 0x40 0x4d 0x3e 0x51 ,
cs:0 mid :0x93 0x94 0x84 0x84 0x85 0x81 0x78 ,0x92 0x90 0x83 0x81 0x84 0x80 0x79 ,
cs:0 max :0xcc 0xd8 0xbd 0xc4 0xbd 0xc2 0xa3 ,0xcd 0xd3 0xbd 0xc2 0xbb 0xc2 0xa1 ,
cs:0 range:0x72 0x88 0x71 0x7f 0x6f 0x81 0x56 ,0x76 0x86 0x73 0x82 0x6e 0x84 0x50 ,
out
U-Boot SPL board init
U-Boot SPL 2017.09-gaaca6ffec1-211203 #zzz (Dec 03 2021 - 18:42:16)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 9
spl: mmc init failed with error: -95
Trying to boot from MMC1
No misc partition
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(fe4f274c06...) + OK
## Checking uboot 0x00a00000 ... sha256(6969f8468a...) + OK
## Checking fdt 0x00b4ae48 ... sha256(dbcc8ef6d0...) + OK
## Checking atf-2 0x00068000 ... sha256(8d44036095...) + OK
## Checking atf-3 0xfdcd0000 ... sha256(e410275b51...) + OK
## Checking atf-4 0xfdcc9000 ... sha256(990c53fc01...) + OK
## Checking atf-5 0x00066000 ... sha256(315a4195a9...) + OK
## Checking optee 0x08400000 ... sha256(66bbd17352...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
Total: 283.619 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-181-gc9a647cae:cl
NOTICE: BL31: Built : 10:55:41, Oct 18 2021
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: pmu v1 is valid
INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-641-g4167319d3 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #8 Wed Mar 16 15:14:56 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0xa00000
INFO: SPSR = 0x3c9
U-Boot 2017.09(u-boot commit id: 66a8f8f26a283e35a8ece98fe867e10aafed9fbc)(sdk version: rk356x_linux_next.xml)-g66a8f8f26a-dirty #huangjf (Jul 09 2022 - 14:20:27 +0800)
Model: Firefly RK3568 Board
PreSerial: 2, raw, 0xfe660000
DRAM: 2 GiB
Sysmem: init
Relocation Offset: 7d32e000
Relocation fdt: 7b9f8b20 - 7b9fecd8
CR: M/C/I
Using default environment
dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v1
No misc partition
boot mode: normal
FIT: No boot partition
** File not found rk-kernel.dtb **
No resource partition
No resource partition
Failed to load DTB, ret=-19
No find valid DTB, ret=-22
Failed to get kernel dtb, ret=-22
io-domain: OK
Model: Firefly RK3568 Board
rockchip_set_serialno: could not find efuse/otp device
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
apll 816000 KHz
dpll 780000 KHz
gpll 1188000 KHz
cpll 1000000 KHz
npll 24000 KHz
vpll 24000 KHz
hpll 24000 KHz
ppll 200000 KHz
armclk 816000 KHz
aclk_bus 150000 KHz
pclk_bus 50000 KHz
aclk_top_high 300000 KHz
aclk_top_low 200000 KHz
hclk_top 150000 KHz
pclk_top 50000 KHz
aclk_perimid 300000 KHz
hclk_perimid 150000 KHz
pclk_pmu 100000 KHz
No misc partition
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'): 0
Could not find misc partition
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
android_image_load_by_partname: Can't find part: boot
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No boot partition
FIT: No fit blob
FIT: No FIT image
Could not find rootfs part
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:2...
Found U-Boot script /boot.scr
=================begin===================
365 bytes read in 2 ms (177.7 KiB/s)
## Executing script at 00c00000
=================begin===================
57687 bytes read in 3 ms (18.3 MiB/s)
=================begin===================
16633864 bytes read in 94 ms (168.8 MiB/s)
Fdt Ramdisk skip relocation
No misc partition
## Flattened Device Tree blob at 0x0a100000
Booting using the fdt blob at 0x0a100000
Using Device Tree in place at 000000000a100000, end 000000000a111156
can't found rockchip,drm-logo, use rockchip,fb-logo
WARNING: could not set reg FDT_ERR_BADOFFSET.
failed to reserve fb-loader-logo memory
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0x80000000 (size: 0x76c00000)
== DO RELOCATE == Kernel from 0x00280000 to 0x00400000
Total: 531.240 ms
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000] Linux version 5.19.1 (zmj032237@zmj) (aarch64-openwrt-linux-gnu-gcc (OpenWrt GCC 9.3.0 r4891-271e62f9a) 9.3.0, GNU ld (GNU Binutils) 2.32) #0 SMP PREEMPT Thu Aug 25 11:32:36 2022
[ 0.000000] Machine model: Firefly Station P2
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x0000000009400000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
[ 0.000000] cma: Reserved 8 MiB at 0x000000007d000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s34856 r8192 d30680 u73728
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 511496
[ 0.000000] Kernel command line: console=ttyS2,1500000 console=tty2 earlycon=uart8250,mmio32,0xfe660000 root=PARTUUID=5452574f-2211-4433-5566-778899aabb03 rw rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2012816K/2078720K available (9280K kernel code, 2420K rwdata, 2616K rodata, 1792K init, 799K bss, 57712K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 320 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: MBI range [296:319]
[ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
▒> 0.000000] Root IRQ handler: gi▒h
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001530] Console: colour dummy device 80x25
[ 0.001984] printk: console [tty2] enabled
[ 0.002438] printk: bootconsole [uart8250] disabled
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000] Linux version 5.19.1 (zmj032237@zmj) (aarch64-openwrt-linux-gnu-gcc (OpenWrt GCC 9.3.0 r4891-271e62f9a) 9.3.0, GNU ld (GNU Binutils) 2.32) #0 SMP PREEMPT Thu Aug 25 11:32:36 2022
[ 0.000000] Machine model: Firefly Station P2
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x0000000009400000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
[ 0.000000] cma: Reserved 8 MiB at 0x000000007d000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s34856 r8192 d30680 u73728
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 511496
[ 0.000000] Kernel command line: console=ttyS2,1500000 console=tty2 earlycon=uart8250,mmio32,0xfe660000 root=PARTUUID=5452574f-2211-4433-5566-778899aabb03 rw rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2012816K/2078720K available (9280K kernel code, 2420K rwdata, 2616K rodata, 1792K init, 799K bss, 57712K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 320 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: MBI range [296:319]
[ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
▒> 0.000000] Root IRQ handler: gi▒h
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001530] Console: colour dummy device 80x25
[ 0.001984] printk: console [tty2] enabled
[ 0.002438] printk: bootconsole [uart8250] disabled
[ 0.002978] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.003010] pid_max: default: 32768 minimum: 301
[ 0.003247] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003288] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.005124] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.005156] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005284] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005549] rcu: Hierarchical SRCU implementation.
[ 0.005569] rcu: Max phase no-delay instances is 1000.
[ 0.005849] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.006835] smp: Bringing up secondary CPUs ...
[ 0.008253] Detected VIPT I-cache on CPU1
[ 0.008303] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[ 0.008355] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 0.009813] Detected VIPT I-cache on CPU2
[ 0.009854] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[ 0.009894] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 0.011389] Detected VIPT I-cache on CPU3
[ 0.011427] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[ 0.011464] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 0.011567] smp: Brought up 1 node, 4 CPUs
[ 0.011680] SMP: Total of 4 processors activated.
[ 0.011697] CPU features: detected: 32-bit EL0 Support
[ 0.011712] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.011734] CPU features: detected: Common not Private translations
[ 0.011750] CPU features: detected: CRC32 instructions
[ 0.011767] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.011782] CPU features: detected: Privileged Access Never
[ 0.011796] CPU features: detected: RAS Extension Support
[ 0.011813] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.012254] CPU: All CPU(s) started at EL2
[ 0.023669] KASLR disabled due to lack of seed
[ 0.023852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.023898] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.024297] pinctrl core: initialized pinctrl subsystem
[ 0.025815] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.027710] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.027986] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.028217] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.030145] thermal_sys: Registered thermal governor 'step_wise'
[ 0.030156] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.030751] cpuidle: using governor menu
[ 0.030949] ASID allocator initialised with 65536 entries
[ 0.031089] Serial: AMBA PL011 UART driver
[ 0.041978] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe040000.vop
[ 0.054800] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[ 0.055373] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[ 0.055994] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[ 0.056534] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[ 0.057077] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[ 0.061130] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi
[ 0.074916] cryptd: max_cpu_qlen set to 1000
[ 0.080770] iommu: Default domain type: Translated
[ 0.080810] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.081111] SCSI subsystem initialized
[ 0.081620] usbcore: registered new interface driver usbfs
[ 0.081697] usbcore: registered new interface driver hub
[ 0.081755] usbcore: registered new device driver usb
[ 0.082166] pps_core: LinuxPPS API ver. 1 registered
[ 0.082187] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.082230] PTP clock support registered
[ 0.082697] ARM FF-A: FFA_VERSION returned not supported
[ 0.082888] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
[ 0.083129] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 0.083208] arm-scmi firmware:scmi: Malformed reply - real_sz:8 calc_sz:4 (loop_num_ret:3)
[ 0.083238] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 0.084847] clocksource: Switched to clocksource arch_sys_counter
[ 0.085132] VFS: Disk quotas dquot_6.6.0
[ 0.085207] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.089244] NET: Registered PF_INET protocol family
[ 0.089516] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.091775] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.091889] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.091927] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.092082] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.092345] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.092493] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.092560] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.092793] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.092881] PCI: CLS 0 bytes, default 64
[ 0.094393] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.101136] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.101167] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.102692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.102932] io scheduler mq-deadline registered
[ 0.112284] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap
[ 0.114129] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.115068] phy phy-fe8c0000.phy.6: lane number 0, val 1
[ 0.115102] phy phy-fe8c0000.phy.6: bifurcation disabled
[ 0.130995] phy phy-fe8c0000.phy.6: p3phy (fw-d54d0eb) initialized
[ 0.131113] rockchip-dw-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
[ 0.131175] rockchip-dw-pcie 3c0800000.pcie: IO 0x03bef00000..0x03beffffff -> 0x003ef00000
[ 0.131223] rockchip-dw-pcie 3c0800000.pcie: MEM 0x0380000000..0x03beefffff -> 0x0000000000
[ 0.144616] rockchip-dw-pcie 3c0800000.pcie: iATU unroll: enabled
[ 0.144645] rockchip-dw-pcie 3c0800000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[ 1.249075] rockchip-dw-pcie 3c0800000.pcie: Phy link never came up
[ 1.249233] rockchip-dw-pcie 3c0800000.pcie: PCI host bridge to bus 0002:00
[ 1.249264] pci_bus 0002:00: root bus resource [bus 00-0f]
[ 1.249290] pci_bus 0002:00: root bus resource [io 0x0000-0xfffff] (bus address [0x3ef00000-0x3effffff])
[ 1.249317] pci_bus 0002:00: root bus resource [mem 0x380000000-0x3beefffff] (bus address [0x00000000-0x3eefffff])
[ 1.249379] pci 0002:00:00.0: [1d87:3566] type 01 class 0x060400
[ 1.249418] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff]
[ 1.249447] pci 0002:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff]
[ 1.249474] pci 0002:00:00.0: reg 0x38: [mem 0x380000000-0x38000ffff pref]
[ 1.249576] pci 0002:00:00.0: supports D1 D2
[ 1.249595] pci 0002:00:00.0: PME# supported from D0 D1 D3hot
[ 1.254699] pci_bus 0002:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
[ 1.259414] pci 0002:00:00.0: BAR 0: no space for [mem size 0x40000000]
[ 1.259446] pci 0002:00:00.0: BAR 0: failed to assign [mem size 0x40000000]
[ 1.259473] pci 0002:00:00.0: BAR 1: no space for [mem size 0x40000000]
[ 1.259496] pci 0002:00:00.0: BAR 1: failed to assign [mem size 0x40000000]
[ 1.259521] pci 0002:00:00.0: BAR 6: assigned [mem 0x380000000-0x38000ffff pref]
[ 1.259550] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 1.261334] pcieport 0002:00:00.0: PME: Signaling with IRQ 22
[ 1.261737] pcieport 0002:00:00.0: AER: enabled with IRQ 22
[ 1.266946] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.266995] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 1.269183] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.269219] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 1.270331] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[ 1.272040] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.273928] printk: console [ttyS2] disabled
[ 1.274021] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 27, base_baud = 1500000) is a 16550A
[ 1.375035] printk: console [ttyS2] enabled
[ 1.378514] rockchip-vop2 fe040000.vop: Adding to iommu group 0
[ 1.382467] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.390849] brd: module loaded
[ 1.395422] loop: module loaded
[ 1.395745] mtip32xx Version 1.3.1
[ 1.400251] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.400767] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.401389] Intel(R) 2.5G Ethernet Linux Driver
[ 1.401809] Copyright(c) 2018 Intel Corporation.
[ 1.403442] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
[ 1.404232] rk_gmac-dwmac fe010000.ethernet: no regulator found
[ 1.404778] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
[ 1.405453] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
[ 1.405973] rk_gmac-dwmac fe010000.ethernet: RX delay(0x26).
[ 1.406493] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[ 1.407101] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
[ 1.412670] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[ 1.413476] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 1.414133] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
[ 1.414606] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
[ 1.415280] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
[ 1.415952] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[ 1.416584] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[ 1.417196] rk_gmac-dwmac fe010000.ethernet: TSO supported
[ 1.417698] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.418420] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
[ 1.419064] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[ 1.419606] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
[ 1.557314] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found
[ 1.558276] rk_gmac-dwmac fe2a0000.ethernet: no regulator found
[ 1.558825] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (input).
[ 1.559465] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c).
[ 1.559980] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f).
[ 1.560499] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
[ 1.561135] rk_gmac-dwmac fe2a0000.ethernet: clock input from PHY
[ 1.566704] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII
[ 1.567474] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 1.568131] rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5
[ 1.568604] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported
[ 1.569307] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported
[ 1.569985] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
[ 1.570620] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
[ 1.571201] rk_gmac-dwmac fe2a0000.ethernet: TSO supported
[ 1.571696] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.572422] rk_gmac-dwmac fe2a0000.ethernet: Enabled RFS Flow TC (entries=10)
[ 1.573086] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
[ 1.573634] rk_gmac-dwmac fe2a0000.ethernet: Using 32 bits DMA width
[ 1.713243] dwc3 fcc00000.usb: Configuration mismatch. dr_mode forced to host
[ 1.713930] rockchip-usb2phy fe8a0000.usb2phy: Requested PHY is disabled
[ 1.718552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.719160] ehci-platform: EHCI generic platform driver
[ 1.719937] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.720527] ohci-platform: OHCI generic platform driver
[ 1.721959] rockchip-usb2phy fe8a0000.usb2phy: Requested PHY is disabled
[ 1.722146] ehci-platform fd800000.usb: EHCI Host Controller
[ 1.722163] ohci-platform fd840000.usb: Generic Platform OHCI controller
[ 1.722193] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 1
[ 1.722277] ehci-platform fd880000.usb: EHCI Host Controller
[ 1.722305] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
[ 1.722347] ohci-platform fd840000.usb: irq 37, io mem 0xfd840000
[ 1.722409] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[ 1.722419] ehci-platform fd880000.usb: irq 36, io mem 0xfd880000
[ 1.722435] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 3
[ 1.722535] ohci-platform fd8c0000.usb: irq 38, io mem 0xfd8c0000
[ 1.722602] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.723118] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 4
[ 1.723712] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 1.724490] ehci-platform fd800000.usb: irq 35, io mem 0xfd800000
[ 1.725082] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 1.731856] xhci-hcd xhci-hcd.0.auto: irq 33, io mem 0xfcc00000
[ 1.732567] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.733101] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 1.733805] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.734950] hub 5-0:1.0: USB hub found
[ 1.735339] hub 5-0:1.0: 1 port detected
[ 1.736119] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.736887] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[ 1.737350] hub 6-0:1.0: USB hub found
[ 1.737840] hub 6-0:1.0: 1 port detected
[ 1.738733] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.739233] hub 2-0:1.0: USB hub found
[ 1.739293] hub 2-0:1.0: 1 port detected
[ 1.740373] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 1.741246] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 1.742149] xhci-hcd xhci-hcd.1.auto: irq 34, io mem 0xfd000000
[ 1.742870] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.743384] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 1.744089] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.745203] hub 7-0:1.0: USB hub found
[ 1.745596] hub 7-0:1.0: 1 port detected
[ 1.746375] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.747553] hub 8-0:1.0: USB hub found
[ 1.747935] hub 8-0:1.0: 1 port detected
[ 1.748797] usbcore: registered new interface driver usb-storage
[ 1.749689] mousedev: PS/2 mouse device common for all mice
[ 1.750581] i2c_dev: i2c /dev entries driver
[ 1.752885] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[ 1.753052] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[ 1.753983] hub 4-0:1.0: USB hub found
[ 1.754472] hub 4-0:1.0: 1 port detected
[ 1.760959] rk808 0-0020: chip id: 0x8090
[ 1.785474] hub 1-0:1.0: USB hub found
[ 1.785884] hub 1-0:1.0: 1 port detected
[ 1.787121] hub 3-0:1.0: USB hub found
[ 1.787509] hub 3-0:1.0: 1 port detected
[ 1.836091] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.836689] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.859045] vdda0v9_image: Bringing 600000uV into 900000-900000uV
[ 1.872688] vccio_acodec: Bringing 600000uV into 3300000-3300000uV
[ 1.895569] vcca1v8_image: Bringing 600000uV into 1800000-1800000uV
[ 1.908988] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
[ 1.920993] rk808-rtc rk808-rtc: registered as rtc0
[ 1.924110] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:23 UTC (1501923623)
[ 1.927436] rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio)
[ 1.928280] rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low)
[ 1.932939] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
[ 1.934842] sdhci: Secure Digital Host Controller Interface driver
[ 1.935417] sdhci: Copyright(c) Pierre Ossman
[ 1.935813] Synopsys Designware Multimedia Card Interface Driver
[ 1.936673] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.937421] dwmmc_rockchip fe000000.mmc: IDMAC supports 32-bit address mode.
[ 1.937429] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
[ 1.937457] dwmmc_rockchip fe000000.mmc: Using internal DMA controller.
[ 1.938078] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
[ 1.938738] dwmmc_rockchip fe000000.mmc: Version ID is 270a
[ 1.939276] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
[ 1.939303] dwmmc_rockchip fe000000.mmc: DW MMC controller at irq 66,32 bit host data width,256 deep fifo
[ 1.939883] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 67,32 bit host data width,256 deep fifo
[ 1.940509] dwmmc_rockchip fe000000.mmc: allocated mmc-pwrseq
[ 1.941051] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
[ 1.941712] mmc_host mmc2: card is non-removable.
[ 1.943995] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.944859] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 1.945484] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
[ 1.946265] usbcore: registered new interface driver usbhid
[ 1.946759] usbhid: USB HID core driver
[ 1.948043] NET: Registered PF_INET6 protocol family
[ 1.949321] Segment Routing with IPv6
[ 1.949679] In-situ OAM (IOAM) with IPv6
[ 1.950061] NET: Registered PF_PACKET protocol family
[ 1.950612] 8021q: 802.1Q VLAN Support v1.8
[ 1.957778] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 1.969806] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[ 1.977763] Stack Depot allocating hash table with kvcalloc
[ 1.982666] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffff800008996110)
[ 1.990067] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.991323] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.992210] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffff80000899a2a8)
[ 1.993207] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 2.021089] mmc1: new HS200 MMC card at address 0001
[ 2.022033] mmcblk1: mmc1:0001 Y2P032 29.1 GiB
[ 2.024381] Alternate GPT is invalid, using primary GPT.
[ 2.024914] mmcblk1: p1 p2 p3 p128
[ 2.025720] mmcblk1boot0: mmc1:0001 Y2P032 4.00 MiB
[ 2.027127] mmcblk1boot1: mmc1:0001 Y2P032 4.00 MiB
[ 2.028196] mmcblk1rpmb: mmc1:0001 Y2P032 16.0 MiB, chardev (247:0)
[ 2.060912] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 2.079166] EXT4-fs (mmcblk1p3): mounted filesystem without journal. Quota mode: none.
[ 2.081152] VFS: Mounted root (ext4 filesystem) on device 179:3.
[ 2.082696] Freeing unused kernel memory: 1792K
[ 2.088922] Run /sbin/init as init process
[ 2.093268] Run /etc/init as init process
[ 2.093854] Run /bin/init as init process
[ 2.094410] Run /bin/sh as init process
[ 2.095221] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
[ 2.096469] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.1 #0
[ 2.096996] Hardware name: Firefly Station P2 (DT)
[ 2.097421] Call trace:
[ 2.097641] um▒ba▒▒e+0xc8/0xd8
[ 2.097939] hֿa▒+0x14/0x30
[ 2.098198] u▒▒a▒_lvl+0x64/0x7c
[ 2.098489] u▒▒a▒+0x14/0x2c
[ 2.098748] ▒▒+0x154/0x314
[ 2.099001] k▒n="+0x11c/0x120
[ 2.099276] ▒▒f▒m▒▒k+0x10/0x20
[ 2.099560] SMP: stopping secondary CPUs
[ 2.099911] Kernel Offset: disabled
[ 2.100221] CPU features: 0x800,00008015,18801c02
[ 2.100638] Memory Limit: none
[ 2.100914] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---
|
|
