| 自己设计的rk3308电路，系统启动到某个地方卡死了，急需大牛们给解决一下。以下是打印的信息。 DDR Version V2.06 20211109 CHIP ID = 0x00003308 REG2C: 0x00000032, 0x00000032 In 451MHz DDR2 Col=10 Bank=2 Row=13 Size=64MB OUT: sdram_init finish. Boot1 Release Time: Mar 24 2022 08:28:57, version: 1.36 ROM VER:0x56323030, 19 chip_id:330800,0 ChipType = 0x13, 508 DPLL = 1300 MHz ...nandc_flash_init enter... No.1 FLASH ID:ff ff ff ff ff ff DPLL = 1300 MHz sfc nor id: ff ff ff DPLL = 1300 MHz sfc_nand id: ff ff ff NeedKHz=200KHz,clock=12000KHz NeedKHz=200KHz,clock=12000KHz NeedKHz=200KHz,clock=12000KHz mmc2:cmd5,20 DPLL = 1300 MHz NeedKHz=24000KHz,clock=650000KHz DPLL = 1300 MHz NeedKHz=40000KHz,clock=650000KHz SdmmcInit=2 0 BootCapSize=0 UserCapSize=480MB FwPartOffset=2000 , 0 SdmmcInit=0 NOT PRESENT StorageInit ok = 14547 SecureMode = 0 Secure read PBA: 0x4 Secure read PBA: 0x404 Secure read PBA: 0x804 Secure read PBA: 0xc04 Secure read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT part: 0, name: uboot, start:0x2000, size:0x800 GPT part: 1, name: trust, start:0x2800, size:0x800 GPT part: 2, name: boot, start:0x3000, size:0x3000 GPT part: 3, name: rootfs, start:0x6000, size:0x2d000 GPT part: 4, name: userdata, start:0x33000, size:0xbcfdf find part:uboot OK. first_lba:0x2000. find part:trust OK. first_lba:0x2800. LoadTrust Addr:0x2800 No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x600000, size=0x733d8 RunBL31 0x10000 @ 85368 us INFO: Preloader serial: 4 INFO: Next images boot on AArch32 mode NOTICE: BL31: v1.3(release):e75c67d15 NOTICE: BL31: Built : 10:23:16, Dec 21 2021 INFO: Lastlog: last=0x2c000, realtime=0x2e000, size=0x2000 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe b INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x600000 INFO: SPSR = 0x1d3 U-Boot 2017.09 (Apr 08 2024 - 16:41:38 +0800) Model: Rockchip RK3308 EVB CPU: AArch32 PreSerial: 4 DRAM: 63 MiB Sysmem: init Sysmem Error: Enter alloc: "U-Boot" 0x01451350 - 0x04000000 Sysmem Error: Enter alloc: "STACK" 0x01251350 - 0x01451350 Sysmem Error: Has allcated: U-Boot, 0x0354a360 - 0x04000000 Relocation Offset is: 00000000 Sysmem Error: Enter alloc: "U-Boot" 0x01451350 - 0x04000000 Sysmem Error: Enter alloc: "STACK" 0x01251350 - 0x01451350 Sysmem Error: Has allcated: U-Boot, 0x0354a360 - 0x04000000 Using default environment dwmmc@ff490000: 0 Bootdev(atags): mmc 0 MMC0: Legacy, 50Mhz PartType: EFI jams boot mode: fastboot!!!!!! Found DTB in boot part DTB: rk-kernel.dtb Sysmem Error: Enter alloc: "FDT" 0x03200000 - 0x03216400 Sysmem Error: Has allcated: U-Boot, 0x0354a360 - 0x04000000 Sysmem Error: Has allcated: STACK, 0x01251350 - 0x01451350 vdd_core init 1015000 uV DVFS: cpu: low=0.0'c, high=55.0'c, Vmax=1325000uV, tz_temp=55.0'c, h_repeat=0, l_repeat=0 DVFS: 6669.308'c DVFS: cpu: target rate=408000000, readback rate=816000000 ! DVFS: cpu(high): 816000000->408000000 Hz, 1015000->950000 uV Model: Rockchip RK3308bs evb amic v11 board (AArch32) jams boot mode: fastboot!!!!!! enter fastboot! CLK: (uboot. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 1300000 KHz vpll0 1177823 KHz vpll1 901583 KHz aclk_bus 185714 KHz hclk_bus 100000 KHz pclk_bus 100000 KHz aclk_peri 185714 KHz hclk_peri 100000 KHz pclk_peri 100000 KHz hclk_audio 98151 KHz pclk_audio 98151 KHz Net: Net Initialization Skipped No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 Could not find misc partition ANDROID: reboot reason: "(none)" Sysmem Error: Enter alloc: "KERNEL" 0x02007800 - 0x022cac00 Sysmem Error: Has allcated: U-Boot, 0x0354a360 - 0x04000000 Sysmem Error: Has allcated: STACK, 0x01251350 - 0x01451350 Sysmem Error: Has allcated: FDT, 0x03200000 - 0x03216404 Fdt Ramdisk skip relocation Booting ZIMAGE kernel at 0x2008000(Uncompress to 0x00058000) with fdt at 0x3200000... Sysmem Error: Enter alloc: "UNCOMPRESS-KERNEL" 0x00100000 - 0x00722800 Sysmem Error: Has allcated: U-Boot, 0x0354a360 - 0x04000000 Sysmem Error: Has allcated: STACK, 0x01251350 - 0x01451350 Sysmem Error: Has allcated: FDT, 0x03200000 - 0x03216404 ## Booting Android Image at 0x02007800 ... Kernel load addr 0x02008000 size 2827 KiB ## Flattened Device Tree blob at 03200000 Booting using the fdt blob at 0x3200000 XIP Kernel Image ... OK Using Device Tree in place at 03200000, end 03216352 Adding bank: 0x00100000 - 0x04000000 (size: 0x03f00000) Total: 411.111 ms Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.143 (wjh@ubuntu) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #118 SMP PREEMPT Fri Aug 30 03:02:15 PDT 2024 [ 0.000000] CPU: ARMv7 Processor [410fd042] revision 2 (ARMv7), cr=50c5383d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Rockchip RK3308bs evb amic v11 board (AArch32) [ 0.000000] earlycon: Early serial console at MMIO32 0xff0e0000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x00000000, size 0 MiB [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 12 pages/cpu @c3f13000 s16400 r8192 d24560 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16002 [ 0.000000] Kernel command line: user_debug=31 storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.slot_suffix= androidboot.serialno=c3d9b8674f4b94f6 rw rootwait earlycon=uart8250,mmio32,0xff0e0000 swiotlb=1 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=ext2 snd_aloop.index=7 snd_aloop.use_raw_jiffies=1 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Memory: 59580K/64512K available (2501K kernel code, 222K rwdata, 1248K rodata, 184K init, 220K bss, 4932K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc4800000 - 0xff800000 ( 944 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) [ 0.000000] modules : 0xbf800000 - 0xc0000000 ( 8 MB) [ 0.000000] .text : 0xc0058000 - 0xc02c9974 (2503 kB) [ 0.000000] .init : 0xc0426000 - 0xc0454000 ( 184 kB) [ 0.000000] .data : 0xc0454000 - 0xc048ba90 ( 223 kB) [ 0.000000] .bss : 0xc048d000 - 0xc04c4190 ( 221 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000746] Switching to timer-based delay loop, resolution 41ns [ 0.002362] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) [ 0.003319] pid_max: default: 4096 minimum: 301 [ 0.003872] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004493] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.005660] CPU: Testing write buffer coherency: ok [ 0.006348] Setting up static identity map for 0x58240 - 0x5828c [ 0.022437] Brought up 4 CPUs [ 0.022723] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.023314] CPU: All CPU(s) started in SVC mode. [ 0.024158] devtmpfs: initialized [ 0.047127] VFP support v0.3: implementor 41 architecture 3 part 40 variant 4 rev 2 [ 0.048269] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.049189] futex hash table entries: 16 (order: -2, 1024 bytes) [ 0.050068] pinctrl core: initialized pinctrl subsystem [ 0.051890] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.055628] cpuidle: using governor menu [ 0.056011] Registered FIQ tty driver [ 0.059477] console [pstore-1] enabled [ 0.059840] pstore: Registered ramoops as persistent store backend [ 0.060411] ramoops: attached 0x20000@0x30000, ecc: 0/0 [ 0.081395] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.082138] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.083372] fiq debugger fiq mode enabled [[ 0.084099] console [ttyFIQ0] enabled 0.084099] console [ttyFIQ0] enabled [ 0.084762] bootconsole [uart0] disabled [ 0.084762] bootconsole [uart0] disabled [ 0.085387] Registered fiq debugger ttyFIQ0 WARNING: suspend_mode_handler: Not support call: 0x4 [ 0.116503] vcc_1v8: regulator get failed, ret=-517 [ 0.116894] vcc_1v8_codec: regulator get failed, ret=-517 [ 0.117672] vcc_1v8: supplied by vcc_io [ 0.117751] vcc_1v8_codec: supplied by vcc_io [ 0.117914] vccio_flash: supplied by vcc_io [ 0.119900] SCSI subsystem initialized [ 0.120067] usbcore: registered new interface driver usbfs [ 0.120140] usbcore: registered new interface driver hub [ 0.120245] usbcore: registered new device driver usb [ 0.121327] pps_core: LinuxPPS API ver. 1 registered [ 0.121344] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.122461] Advanced Linux Sound Architecture Driver Initialized. [ 0.122769] rockchip-cpuinfo cpuinfo: Serial : 7f19991b2fc3e895 [ 0.123527] clocksource: Switched to clocksource arch_sys_counter [ 0.126002] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 0.131263] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.131361] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.134965] io scheduler noop registered (default) [ 0.136415] phy phy-ff008000.syscon:usb2-phy@100.0: Failed to get VBUS supply regulator [ 0.140566] dma-pl330 ff2c0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.140600] dma-pl330 ff2c0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 0.143254] dma-pl330 ff2d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.143281] dma-pl330 ff2d0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.143613] rockchip-pvtm ff000000.grf:pmu-pvtm: failed to get rst 0 pmu [ 0.143740] rockchip-pvtm ff00c000.syscon:pvtm: failed to get rst 0 core [ 0.145280] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.147437] ff0a0000.serial: ttyS0 at MMIO 0xff0a0000 (irq = 28, base_baud = 5078125) is a 16550A [ 0.149239] [drm] Initialized drm 1.1.0 20060810 [ 0.149437] random: nonblocking pool is initialized [ 0.153587] zram: Added device: zram0 [ 0.153818] SCSI Media Changer driver v0.25 [ 0.154870] ff400000.usb supply vusb_d not found, using dummy regulator [ 0.154944] ff400000.usb supply vusb_a not found, using dummy regulator [ 0.157156] dwc2 ff400000.usb: Configuration mismatch. dr_mode forced to device [ 0.157192] dwc2 ff400000.usb: 128 invalid for host_nperio_tx_fifo_size. Check HW configuration. [ 0.157208] dwc2 ff400000.usb: 256 invalid for host_perio_tx_fifo_size. Check HW configuration. [ 0.157252] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM [ 0.380985] phy phy-ff008000.syscon:usb2-phy@100.0: charger = USB_SDP_CHARGER [ 0.381244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.381265] ehci-platform: EHCI generic platform driver [ 0.385017] ehci-platform ff440000.usb: EHCI Host Controller [ 0.385059] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 1 [ 0.385188] ehci-platform ff440000.usb: irq 40, io mem 0xff440000 [ 0.390556] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00 [ 0.391439] hub 1-0:1.0: USB hub found [ 0.391482] hub 1-0:1.0: 1 port detected [ 0.392146] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.392185] ohci-platform: OHCI generic platform driver [ 0.392556] ohci-platform ff450000.usb: Generic Platform OHCI controller [ 0.392597] ohci-platform ff450000.usb: new USB bus registered, assigned bus number 2 [ 0.392723] ohci-platform ff450000.usb: irq 41, io mem 0xff450000 [ 0.448392] hub 2-0:1.0: USB hub found [ 0.448441] hub 2-0:1.0: 1 port detected [ 0.449584] usbcore: registered new interface driver usb-storage [ 0.449613] usb20_otg: version 3.10a 21-DEC-2012 [ 0.449949] usb20_host: version 3.10a 21-DEC-2012 [ 0.450864] i2c /dev entries driver [ 0.451744] rk3x-i2c ff050000.i2c: Initialized RK3xxx I2C bus at c48d6000 [ 0.515052] rtc-hym8563 3-0051: could not init device, -6 [ 0.515118] rk3x-i2c ff070000.i2c: Initialized RK3xxx I2C bus at c48d8000 [ 0.516365] rockchip-iodomain ff000000.grf:io-domains: vccio0 supplied by 3300000 uV [ 0.516499] rockchip-iodomain ff000000.grf:io-domains: vccio1 supplied by 3300000 uV [ 0.516621] rockchip-iodomain ff000000.grf:io-domains: vccio2 supplied by 3300000 uV [ 0.516714] rockchip-iodomain ff000000.grf:io-domains: vccio3 supplied by 3300000 uV [ 0.516798] rockchip-iodomain ff000000.grf:io-domains: vccio4 supplied by 3300000 uV [ 0.516877] rockchip-iodomain ff000000.grf:io-domains: vccio5 supplied by 3300000 uV [ 0.518474] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647 [ 0.518713] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully! [ 0.519575] cpu cpu0: leakage=13 [ 0.519773] cpu cpu0: Failed to get pvtm [ 0.520872] cpu cpu0: l=0 h=55000 hyst=5000 l_limit=1200000000 h_limit=1008000000 [ 0.521854] cpuidle: enable-method property 'psci' found operations [ 0.521979] cpuidle: enable-method property 'psci' found operations [ 0.522085] cpuidle: enable-method property 'psci' found operations [ 0.522197] cpuidle: enable-method property 'psci' found operations [ 0.522359] Synopsys Designware Multimedia Card Interface Driver [ 0.523453] dwmmc_rockchip ff480000.dwmmc: num-slots property not found, assuming 1 slot is available [ 0.523629] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode. [ 0.523676] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller. [ 0.523700] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a [ 0.523770] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 42,32 bit host data width,256 deep fifo [ 0.523842] dwmmc_rockchip ff480000.dwmmc: No vmmc regulator found [ 0.523857] dwmmc_rockchip ff480000.dwmmc: No vqmmc regulator found [ 0.524190] dwmmc_rockchip ff480000.dwmmc: allocated mmc-pwrseq [ 0.534620] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.545706] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized [ 0.546363] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode. [ 0.546407] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller. [ 0.546431] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a [ 0.546492] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 43,32 bit host data width,256 deep fifo [ 0.546571] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found [ 0.546587] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found [ 0.557616] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.568660] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized [ 0.569268] hidraw: raw HID events driver (C) Jiri Kosina [ 0.569674] usbcore: registered new interface driver usbhid [ 0.569689] usbhid: USB HID core driver [ 0.569817] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node [ 0.570081] rockchip-dmc dmc: Failed to get leakage [ 0.570166] rockchip-dmc dmc: Failed to get pvtm [ 0.570417] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate [ 0.570436] rockchip-dmc dmc: failed to get vop pn to msch rl [ 0.570451] rockchip-dmc dmc: don't add devfreq feature [ 0.570470] rockchip-dmc dmc: Cannot set voltage 975000 uV [ 0.570647] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) [ 0.570781] rockchip-dmc: probe of dmc failed with error -22 [ 0.572850] rknandc_base v1.1 2017-01-11 [ 0.573177] rknandc ff4b0000.nandc: rknandc_probe clk rate = 147456000 [ 0.573234] rkflash_dev_init enter [ 0.573248] ...nandc_flash_init enter... [ 0.573270] rkflash[0] is invalid [ 0.573405] rksfc_base v1.1 2016-01-08 [ 0.573721] rksfc ff4c0000.sfc: rksfc_probe clk rate = 100000000 [ 0.573769] rkflash_dev_init enter [ 0.573789] sfc nor id: ff ff ff [ 0.573799] rkflash[1] is invalid [ 0.573807] rkflash_dev_init enter [ 0.573826] sfc_nand id: ff ff ff [ 0.573836] rkflash[2] is invalid [ 0.574216] rockchip-pinctrl pinctrl: pin gpio0-10 already requested by ff1f0000.tsadc; cannot claim for rp_power [ 0.574240] rockchip-pinctrl pinctrl: pin-10 (rp_power) status -22 [ 0.574259] rockchip-pinctrl pinctrl: could not request pin 10 (gpio0-10) from group rp-power-pins on device rockchip-pinctrl [ 0.574274] rp_power rp_power: Error applying setting, reverse things back [ 0.574321] rp_gpio prepare build 1 gpio [ 0.574377] rp_gpio request vcc_5v [ 0.574420] success request gpio138 out [ 0.574741] input: gpio_event as /devices/platform/rp_power/input/input0 [ 0.575716] rp_gpio prepare build 3 gpio [ 0.575784] rp_gpio request gpio0b0 [ 0.575817] success request gpio8 out [ 0.575858] rp_gpio request gpio0b1 [ 0.575881] success request gpio9 out [ 0.575921] rp_gpio request gpio0b6 [ 0.575946] success request gpio14 out [ 0.579977] dummy_codec dummy-codec: Unable to get mclk [ 0.580499] rk3308-acodec ff560000.acodec: Don't need hp-ctl gpio [ 0.580626] rk3308-acodec ff560000.acodec: Don't need hp-det gpio [ 0.580725] rk3308-acodec ff560000.acodec: Don't need spk-ctl gpio [ 0.580822] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio [ 0.580838] rk3308-acodec ff560000.acodec: De-pop as much as possible [ 0.580950] The acodec version is: b [ 0.581086] gpiod_direction_input: invalid GPIO [ 0.581107] rk3308-acodec ff560000.acodec: Failed to request IRQ: -22 [ 0.581275] rk3308-acodec: probe of ff560000.acodec failed with error -22 [ 0.587858] rk-multicodecs vad-sound_8: vad <-> i2s-8ch-0-dais mapping ok [ 0.588663] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) [ 0.589063] flash vendor_init_thread! [ 0.589166] flash vendor storage:20170308 ret = -1 [ 0.589507] Registering SWP/SWPB emulation handler [ 0.591039] input: adc-keys as /devices/platform/adc-keys/input/input1 [ 0.593151] asoc-simple-card i2s_2ch: dummy_codec <-> ff350000.i2s mapping ok [ 0.594426] hctosys: unable to open rtc device (rtc0) [ 0.604387] ALSA device list: [ 0.604413] #0: rockchip,rk3308-vad [ 0.604421] #1: i2s_2ch [ 0.604428] #7: Loopback 1 [ 0.604661] Waiting for root device PARTUUID=614e0000-0000... [ 0.609611] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) [ 0.619630] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) [ 0.650643] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 0.650866] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 3.594694] vendor storage:20160801 ret = -1 |
-
-
7.36 KB, 下载次数: 0, 下载积分: 灯泡 -1 , 经验 -1
