Firefly开源社区

打印 上一主题 下一主题

[技术讨论] 求大佬指点,RK3399刷官方ubuntu24.04不开机,串口输出卡在fan53555

8

积分

0

威望

0

贡献

吃瓜的群众

积分
8

求大佬指点,RK3399刷官方ubuntu24.04不开机,串口输出卡在fan53555

发表于 2024-9-19 16:47:51      浏览:504 | 回复:0        打印      只看该作者   [复制链接] 楼主
DDR Version 1.26 20210628
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 354
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68604
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x40000
GPT part:  4, name:         recovery, start:0x4a000, size:0x20000
GPT part:  5, name:           backup, start:0x6a000, size:0x10000
GPT part:  6, name:           rootfs, start:0x7a000, size:0x4ab000
GPT part:  7, name:         userdata, start:0x525000, size:0x17f9fc0
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xe8748
RunBL31 0x40000 @ 110758 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-278-gef70f120a #zhangzj #9 Fri Sep 17 09:39:24 UTC 2021 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09(u-boot commit id: e24f0b9f2b)(sdk version: rk3399_linux_release_20230328_v2.5.1d)-ge24f0b9f2b #weicz (Mar 30 2023 - 16:11:18 +0800)

Model: Firefly-RK3399 Board
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset: f5bdb000, fdt: f3dcf4d8
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 50Mhz
PartType: EFI
=================begin===================
104667 bytes read in 69 ms (1.4 MiB/s)
DTB(Distro): rk-kernel.dtb
boot mode: recovery (misc)
Android header version 0
I2c0 speed: 400000Hz
PMIC:  RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 1100000 uV
In:    serial
Out:   serial
Err:   serial
Model: Firefly-RK3399 Board (Linux Opensource)
Found DTB in recovery part
Rockchip UBOOT DRM driver version: v1.0.1
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 856000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 24000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0
No FDT memory address configured. Default at 0x08300000
ANDROID: reboot reason: "recovery"
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 23473 KiB
RAM disk load addr 0x0a200000 size 7436 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831c8da
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Total: 2986.969 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.194 (weicz@tchip14) (rk3399/firefly: 2c932b990420f943afa543138f1ab2a99a33cc0c) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #267 SMP Thu Mar 30 11:31:00 CST 2023
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ecb000 s46440 r8192 d31384 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 991752
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  storagenode=sdhci@fe330000 recovery androidboot.slot_suffix= androidboot.serialno=e3dff3216d039f2c  ro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xf7e83000-0xf7ec3000] (0MB)
[    0.000000] Memory: 3924164K/4030464K available (14782K kernel code, 1840K rwdata, 5588K rodata, 1216K init, 774K bss, 106300K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009470000 - 0xffffff80095a0000   (  1216 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008ef0000   ( 14784 KB)
[    0.000000]     .rodata : 0xffffff8008ef0000 - 0xffffff8009470000   (  5632 KB)
[    0.000000]       .data : 0xffffff80095a0000 - 0xffffff800976c008   (  1841 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2d00000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2c90000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f2ca0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002243] Console: colour dummy device 80x25
[    0.002686] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003675] pid_max: default: 32768 minimum: 301
[    0.004203] Security Framework initialized
[    0.004668] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005308] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006756] Initializing cgroup subsys io
[    0.007165] Initializing cgroup subsys memory
[    0.007607] Initializing cgroup subsys devices
[    0.008038] Initializing cgroup subsys freezer
[    0.008480] Initializing cgroup subsys perf_event
[    0.008936] Initializing cgroup subsys net_prio
[    0.009374] Initializing cgroup subsys hugetlb
[    0.009815] Initializing cgroup subsys pids
[    0.010234] ftrace: allocating 53054 entries in 208 pages
[    0.137391] sched-energy: Sched-energy-costs installed from DT
[    0.137958] CPU0: update cpu_capacity 401
[    0.138403] ASID allocator initialised with 32768 entries
[    0.142235] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.143609] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.145910] Detected VIPT I-cache on CPU1
[    0.145946] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.145977] CPU1: using LPI pending table @0x00000000f2f60000
[    0.146031] CPU1: update cpu_capacity 401
[    0.146034] CPU1: Booted secondary processor [410fd034]
[    0.146825] Detected VIPT I-cache on CPU2
[    0.146857] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.146888] CPU2: using LPI pending table @0x00000000f2f80000
[    0.146938] CPU2: update cpu_capacity 401
[    0.146942] CPU2: Booted secondary processor [410fd034]
[    0.147739] Detected VIPT I-cache on CPU3
[    0.147771] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.147801] CPU3: using LPI pending table @0x00000000f2fe0000
[    0.147849] CPU3: update cpu_capacity 401
[    0.147853] CPU3: Booted secondary processor [410fd034]
[    0.148651] Detected PIPT I-cache on CPU4
[    0.148676] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.148711] CPU4: using LPI pending table @0x00000000f2410000
[    0.148746] CPU4: update cpu_capacity 1024
[    0.148749] CPU4: Booted secondary processor [410fd082]
[    0.149414] Detected PIPT I-cache on CPU5
[    0.149439] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.149475] CPU5: using LPI pending table @0x00000000f2440000
[    0.149509] CPU5: update cpu_capacity 1024
[    0.149512] CPU5: Booted secondary processor [410fd082]
[    0.149624] Brought up 6 CPUs
[    0.161979] SMP: Total of 6 processors activated.
[    0.162431] CPU features: detected feature: GIC system register CPU interface
[    0.163120] CPU features: detected feature: 32-bit EL0 Support
[    0.163679] CPU: All CPU(s) started at EL2
[    0.164110] alternatives: patching kernel code
[    0.165917] devtmpfs: initialized
[    0.192232] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.193190] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.194158] xor: measuring software checksum speed
[    0.204120]    8regs     :  2860.000 MB/sec
[    0.214176]    8regs_prefetch:  2564.000 MB/sec
[    0.224230]    32regs    :  3208.000 MB/sec
[    0.234286]    32regs_prefetch:  2848.000 MB/sec
[    0.234729] xor: using function: 32regs (3208.000 MB/sec)
[    0.235264] pinctrl core: initialized pinctrl subsystem
[    0.237477] Failed to find legacy iommu devices
[    0.238289] NET: Registered protocol family 16
[    0.242990] cpuidle: using governor ladder
[    0.246999] cpuidle: using governor menu
[    0.247394] Registered FIQ tty driver
[    0.248329] vdso: 2 pages (1 code @ ffffff8008ef6000, 1 data @ ffffff80095a4000)
[    0.249067] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.250133] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.273931] console [pstore-1] enabled
[    0.274304] pstore: Registered ramoops as persistent store backend
[    0.274897] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.278012] console [ttyFIQ0] enabled
[    0.278012] console [ttyFIQ0] enabled
[    0.278705] bootconsole [uart0] disabled
[    0.278705] bootconsole [uart0] disabled
[    0.279640] Registered fiq debugger ttyFIQ0
[    0.329854] raid6: int64x1  gen()   468 MB/s
[    0.346923] raid6: int64x1  xor()   427 MB/s
[    0.364086] raid6: int64x2  gen()   675 MB/s
[    0.381127] raid6: int64x2  xor()   599 MB/s
[    0.398241] raid6: int64x4  gen()   984 MB/s
[    0.415294] raid6: int64x4  xor()   675 MB/s
[    0.432420] raid6: int64x8  gen()   781 MB/s
[    0.449495] raid6: int64x8  xor()   634 MB/s
[    0.466573] raid6: neonx1   gen()   964 MB/s
[    0.483696] raid6: neonx1   xor()   681 MB/s
[    0.500798] raid6: neonx2   gen()  1277 MB/s
[    0.517873] raid6: neonx2   xor()   964 MB/s
[    0.534947] raid6: neonx4   gen()  1734 MB/s
[    0.552055] raid6: neonx4   xor()  1177 MB/s
[    0.569152] raid6: neonx8   gen()  1691 MB/s
[    0.586237] raid6: neonx8   xor()  1248 MB/s
[    0.586627] raid6: using algorithm neonx4 gen() 1734 MB/s
[    0.587103] raid6: .... xor() 1177 MB/s, rmw enabled
[    0.587544] raid6: using intx1 recovery algorithm
[    0.592852] iommu: Adding device ff650000.vpu_service to group 0
[    0.593475] iommu: Adding device ff660000.rkvdec to group 1
[    0.594078] iommu: Adding device ff8f0000.vop to group 2
[    0.594651] iommu: Adding device ff900000.vop to group 3
[    0.595212] iommu: Adding device ff910000.rkisp1 to group 4
[    0.595805] iommu: Adding device ff920000.rkisp1 to group 5
[    0.596781] rk_iommu ff650800.iommu: can't get sclk
[    0.597456] rk_iommu ff660480.iommu: can't get sclk
[    0.598097] rk_iommu ff8f3f00.iommu: can't get sclk
[    0.598685] rk_iommu ff903f00.iommu: can't get sclk
[    0.599286] rk_iommu ff914000.iommu: can't get sclk
[    0.599868] rk_iommu ff924000.iommu: can't get sclk
[    0.600677] SCSI subsystem initialized
[    0.601363] usbcore: registered new interface driver usbfs
[    0.601888] usbcore: registered new interface driver hub
[    0.602456] usbcore: registered new device driver usb
[    0.602976] media: Linux media interface: v0.10
[    0.603425] Linux video capture interface: v2.00
[    0.603906] pps_core: LinuxPPS API ver. 1 registered
[    0.604349] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.605176] PTP clock support registered
[    0.606690] Advanced Linux Sound Architecture Driver Initialized.
[    0.607806] Bluetooth: Core ver 2.21
[    0.608156] NET: Registered protocol family 31
[    0.608563] Bluetooth: HCI device and connection manager initialized
[    0.609136] Bluetooth: HCI socket layer initialized
[    0.609581] Bluetooth: L2CAP socket layer initialized
[    0.610053] Bluetooth: SCO socket layer initialized
[    0.610847] NetLabel: Initializing
[    0.611153] NetLabel:  domain hash size = 128
[    0.611537] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.612026] NetLabel:  unlabeled traffic allowed by default
[    0.612687] nfc: nfc_init: NFC Core ver 0.1
[    0.613106] NET: Registered protocol family 39
[    0.613611] rockchip-cpuinfo cpuinfo: Serial         : e3dff3216d039f2c
[    0.615015] clocksource: Switched to clocksource arch_sys_counter
[    0.668361] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.669289] NET: Registered protocol family 2
[    0.670126] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.671033] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.672547] TCP: Hash tables configured (established 32768 bind 32768)
[    0.673253] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.673954] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.674950] NET: Registered protocol family 1
[    0.675631] RPC: Registered named UNIX socket transport module.
[    0.676172] RPC: Registered udp transport module.
[    0.676591] RPC: Registered tcp transport module.
[    0.677019] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.678272] Trying to unpack rootfs image as initramfs...
[    1.057815] Freeing initrd memory: 7432K
[    1.058987] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.059812] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.061902] kvm [1]: 8-bit VMID
[    1.062194] kvm [1]: Hyp mode initialized successfully
[    1.062769] kvm [1]: interrupt-controller@fff20000 IRQ10
[    1.063445] kvm [1]: timer IRQ12
[    1.066587] audit: initializing netlink subsys (disabled)
[    1.067109] audit: type=2000 audit(0.974:1): initialized
[    1.067972] Initialise system trusted keyring
[    1.068730] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.077267] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.078750] NFS: Registering the id_resolver key type
[    1.079240] Key type id_resolver registered
[    1.079615] Key type id_legacy registered
[    1.079993] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.081323] ntfs: driver 2.1.32 [Flags: R/O].
[    1.082105] fuse init (API version 7.23)
[    1.082794] SGI XFS with security attributes, no debug enabled
[    1.088689] NET: Registered protocol family 38
[    1.089123] Key type asymmetric registered
[    1.089492] Asymmetric key parser 'x509' registered
[    1.090100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.090889] io scheduler noop registered
[    1.091261] io scheduler deadline registered
[    1.091681] io scheduler cfq registered (default)
[    1.093774] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
[    1.098999] ace test_init function.
[    1.099505] ace test_init end.ret=0
[    1.100195] radar end.ret=0
[    1.103334] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.103932] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.104540] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.105120] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.105729] PCI host bridge /pcie@f8000000 ranges:
[    1.106181]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.106640]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    2.115038] pll lock timeout!
[    2.115327] phy phy-pcie-phy.5: phy poweron failed --> -22
[    2.115820] rockchip-pcie f8000000.pcie: fail to power on phy, err -22
[    2.116418] rockchip-pcie f8000000.pcie: deferred probe failed
[    2.117171] rockchip-pcie: probe of f8000000.pcie failed with error -22
[    2.118671] Module initialized.
[    2.119441] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    2.120293] rk-vcodec ff650000.vpu_service: probe device
[    2.120991] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    2.122165] rk-vcodec ff650000.vpu_service: could not find power_model node
[    2.122782] rk-vcodec ff650000.vpu_service: init success
[    2.123503] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    2.124433] rk-vcodec ff660000.rkvdec: probe device
[    2.125067] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    2.125991] rk-vcodec ff660000.rkvdec: could not find power_model node
[    2.126591] rk-vcodec ff660000.rkvdec: init success
[    2.128480] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.129168] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    2.131402] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.132090] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.133917] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.135156] pwm-regulator: supplied by vcc5v0_sys
[    2.136272] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    2.137439] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[    2.138735] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 38, base_baud = 1500000) is a 16550A
[    2.141278] [drm] Initialized drm 1.1.0 20060810
[    2.145688] [drm] Rockchip DRM driver version: v1.0.1
[    2.148382] mali ff9a0000.gpu: Failed to get regulator
[    2.148838] mali ff9a0000.gpu: Power control initialization failed
[    2.149772] Unable to detect cache hierarchy for CPU 0
[    2.151079] brd: module loaded
[    2.156692] loop: module loaded
[    2.157529] zram: Added device: zram0
[    2.158153] lkdtm: No crash points registered, enable through debugfs
[    2.159101] Loading dl1825 driver
[    2.161042] register firefly_spi_init spi return v = :0
[    2.161530] register spi return v = :0
[    2.162372] tun: Universal TUN/TAP device driver, 1.6
[    2.162827] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.164375] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    2.165104] rk_gmac-dwmac fe300000.ethernet: Can not read property: clk_alway_enable.
[    2.165803] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.166442] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    2.166946] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[    2.167470] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.168183] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    2.168798] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.174359] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.174973] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    2.175437]  Ring mode enabled
[    2.175719]  DMA HW capability register supported
[    2.176132]  Normal descriptors
[    2.176439]  RX Checksum Offload Engine supported (type 2)
[    2.176926]  Wake-Up On Lan supported
[    2.177296]  Enable RX Mitigation via HW Watchdog Timer
[    2.245654] libphy: stmmac: probed
[    2.245969] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    2.246554] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    2.248449] usbcore: registered new interface driver rtl8192cu
[    2.249033] usbcore: registered new interface driver rndis_wlan
[    2.249720] usbcore: registered new interface driver mt7601u
[    2.250317] Rockchip WiFi SYS interface (V1.00) ...
[    2.250819] usbcore: registered new interface driver rtl8150
[    2.251371] usbcore: registered new interface driver r8152
[    2.251901] usbcore: registered new interface driver asix
[    2.252422] usbcore: registered new interface driver ax88179_178a
[    2.252998] usbcore: registered new interface driver cdc_ether
[    2.253566] usbcore: registered new interface driver rndis_host
[    2.254155] usbcore: registered new interface driver cdc_ncm
[    2.254690] usbcore: registered new interface driver qmi_wwan
[    2.255245] usbcore: registered new interface driver cdc_mbim
[    2.257154] rockchip-dwc3 usb0: failed to get drvdata dwc3
[    2.360766] rockchip-typec-phy ff800000.phy: wait pma ready timeout
[    2.461394] rockchip-typec-phy ff800000.phy: wait pma ready timeout
[    2.562003] rockchip-typec-phy ff800000.phy: wait pma ready timeout
[    2.662620] rockchip-typec-phy ff800000.phy: wait pma ready timeout
[    2.763253] rockchip-typec-phy ff800000.phy: wait pma ready timeout
[    2.763817] phy phy-ff800000.phy.4: phy poweron failed --> -110
[    2.764413] dwc3 fe900000.dwc3: failed to initialize core
[    2.764968] dwc3: probe of fe900000.dwc3 failed with error -110
[    2.765586] rockchip-dwc3 usb1: failed to get drvdata dwc3
[    2.767191] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.767782] ehci-pci: EHCI PCI platform driver
[    2.768253] ehci-platform: EHCI generic platform driver
[    2.772592] ehci-platform fe3c0000.usb: EHCI Host Controller
[    2.773261] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    2.774065] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    2.780036] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    2.780743] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.781364] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.782003] usb usb1: Product: EHCI Host Controller
[    2.782446] usb usb1: Manufacturer: Linux 4.4.194 ehci_hcd
[    2.782935] usb usb1: SerialNumber: fe3c0000.usb
[    2.783788] hub 1-0:1.0: USB hub found
[    2.784198] hub 1-0:1.0: 1 port detected
[    2.785115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.785675] ohci-platform: OHCI generic platform driver
[    2.786614] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    2.787398] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    2.788188] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    2.843218] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.843825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.844477] usb usb2: Product: Generic Platform OHCI controller
[    2.845001] usb usb2: Manufacturer: Linux 4.4.194 ohci_hcd
[    2.845500] usb usb2: SerialNumber: fe3e0000.usb
[    2.846360] hub 2-0:1.0: USB hub found
[    2.846725] hub 2-0:1.0: 1 port detected
[    2.848030] usbcore: registered new interface driver cdc_acm
[    2.848531] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.849284] usbcore: registered new interface driver cdc_wdm
[    2.849822] usbcore: registered new interface driver uas
[    2.850389] usbcore: registered new interface driver usb-storage
[    2.850995] usbcore: registered new interface driver usbserial
[    2.851557] usbcore: registered new interface driver usbserial_generic
[    2.852171] usbserial: USB Serial support registered for generic
[    2.852740] usbcore: registered new interface driver ch341
[    2.853263] usbserial: USB Serial support registered for ch341-uart
[    2.853856] usbcore: registered new interface driver cp210x
[    2.854387] usbserial: USB Serial support registered for cp210x
[    2.854957] usbcore: registered new interface driver ftdi_sio
[    2.855501] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.856238] usbcore: registered new interface driver keyspan
[    2.856759] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.857484] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.858166] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.858833] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.859530] usbcore: registered new interface driver option
[    2.860065] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.860785] usbcore: registered new interface driver oti6858
[    2.861317] usbserial: USB Serial support registered for oti6858
[    2.861886] usbcore: registered new interface driver pl2303
[    2.862419] usbserial: USB Serial support registered for pl2303
[    2.862982] usbcore: registered new interface driver sierra
[    2.863514] usbserial: USB Serial support registered for Sierra USB modem
[    2.865309] usbcore: registered new interface driver usbtouchscreen
[    2.865874] [HXTP] himax_hx83102_init
[    2.866219] [HXTP] himax_hx83102_probe:Enter
[    2.866882] .. rk pwm remotectl v1.1 init
[    2.867491] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    2.868554] sensor_register_slave:mma8452,id=17
[    2.868969] sensor_register_slave:lis3dh,id=7
[    2.869375] sensor_register_slave:mma7660,id=18
[    2.869789] sensor_register_slave:lsm303d,id=23
[    2.870210] sensor_register_slave:gs_mc3230,id=24
[    2.870630] [Gsensor]   gsensor_init
[    2.870952] sensor_register_slave:mpu6880_acc,id=25
[    2.871396] sensor_register_slave:mpu6500_acc,id=26
[    2.871832] sensor_register_slave:lsm330_acc,id=27
[    2.872276] sensor_register_slave:akm8975,id=31
[    2.872688] sensor_register_slave:akm8963,id=32
[    2.873108] sensor_register_slave:l3g4200d,id=46
[    2.873521] sensor_register_slave:l3g20d,id=47
[    2.873922] sensor_register_slave:ewtsa,id=48
[    2.874320] sensor_register_slave:lsm330_gyro,id=52
[    2.874756] sensor_register_slave:cm3217,id=54
[    2.875165] sensor_register_slave:cm3218,id=55
[    2.876097] i2c /dev entries driver
[    2.877673] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    2.878358] fan53555-reg: supplied by vcc5v0_sys


回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表