Firefly开源社区

12
发表新贴
打印 上一主题 下一主题

ubuntu启动卡在init进程

52

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
52

ubuntu启动卡在init进程

发表于 2015-10-28 15:06:47      浏览:12120 | 回复:10        打印      只看该作者   [复制链接] 楼主
Secure Boot state: 0
bootrk: do_bootm_linux...
   Loading Device Tree to 0480d000, end 04826f68 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

<hit enter to activate fiq debugger>
[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (jackxu@jackxu-G751JY) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #94 SMP PREEMPT Wed Oct 28 13:38:30 CST 2015
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] hdmi init vic is -1
[    0.000000] rockchip_ion_reserve
[    0.000000] cma: CMA: reserved 16 MiB at 2e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Boot mode: NORMAL (0) flag:  (0xc35242ff)
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1ed4000 s14016 r8192 d14656 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttyFIQ0 console=ttyFIQ0 earlyprintk root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init  mtdparts=rk29xxnand:0x00008000@0x00002000(resource),0x00008000@0x0000A000(boot),0x00002000@0x00012000(misc),0x0001a000@0x00014000(backup),-@0x0002e000(linuxroot) storagemedia=emmc loader.timestamp=2015-10-27_18:43:55 hdmi.vic=-1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 2045604k/2045604k available, 51548k reserved, 1318912K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0a907d8   (10786 kB)
[    0.000000]       .init : 0xc0a91000 - 0xc0ce06c0   (2366 kB)
[    0.000000]       .data : 0xc0ce2000 - 0xc0d81148   ( 637 kB)
[    0.000000]        .bss : 0xc0d81148 - 0xc0e9e684   (1142 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 32
[    0.000000] Architected local timer running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 0
[    0.000000] channel:0, lkg:0
[    0.000000] target-temp:95
[    0.000000] channel:2, lkg:0
[    0.000000] target-temp:95
[    0.000000] channel:0, lkg:0
[    0.000000] target-temp:95
[    0.000000] channel:1, lkg:0
[    0.000000] target-temp:95
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.000000] Console: colour dummy device 80x30
[    0.523522] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.523573] pid_max: default: 32768 minimum: 301
[    0.523908] Security Framework initialized
[    0.523950] SELinux:  Initializing.
[    0.524182] Mount-cache hash table entries: 512
[    0.526231] Initializing cgroup subsys debug
[    0.526275] Initializing cgroup subsys freezer
[    0.526368] CPU: Testing write buffer coherency: ok
[    0.527125] /cpus/cpu@0 missing clock-frequency property
[    0.527170] /cpus/cpu@1 missing clock-frequency property
[    0.527204] /cpus/cpu@2 missing clock-frequency property
[    0.527236] /cpus/cpu@3 missing clock-frequency property
[    0.527343] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.527456] Setting up static identity map for 0xc07a0c60 - 0xc07a0cb8
[    0.531768] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x141b (version 3.0)
[    0.611345] CPU1: Booted secondary processor
[    0.611437] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.631087] CPU2: Booted secondary processor
[    0.631169] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.650861] CPU3: Booted secondary processor
[    0.650943] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.651306] Brought up 4 CPUs
[    0.651406] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.651436] CPU: All CPU(s) started in SVC mode.
[    0.653660] devtmpfs: initialized
[    0.671095] pinctrl core: initialized pinctrl subsystem
[    0.671840] regulator-dummy: no parameters
[    0.673467] NET: Registered protocol family 16
[    0.678640] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.679757] ion_snapshot: 0x2e230000 map to 0xf0107000 and copy to 0xc0e79d54 (version 0.1)
[    0.680254] Registered FIQ tty driver
[    0.683782] console [ttyFIQ0] enabled
[    0.684261] Registered fiq debugger ttyFIQ0
[    0.686041] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.686128] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[    0.686201] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.686272] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.686532] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.686764] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.686988] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.687212] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.687435] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.687658] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[    0.687884] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.688110] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.688365] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.688602] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.688660] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.688714] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.688768] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.690523] rockchip_interrupts_register:bank_num=7
[    0.697230] of_get_gpio_init_config:gpio[0] = 257, value = 0
[    0.697316] of_get_gpio_init_config:gpio[1] = 233, value = 0
[    0.697467] rockchip_pinctrl_probe:init ok
[    0.716925] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.717279] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.717335] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.717911] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.718237] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.718292] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.718835] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.719161] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.719216] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.719777] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.720103] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.720157] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.720771] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.721163] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.721217] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.721791] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.722115] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.722170] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.722742] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.723123] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.723177] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.728038] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.728093] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.728712] DDR DEBUG: version 1.00 20140603
[    0.728795] DDR DEBUG: Channel a:
[    0.728832] DDR DEBUG: LPDDR3 Device
[    0.728882] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
[    0.728924] DDR DEBUG: Channel b:
[    0.728956] DDR DEBUG: LPDDR3 Device
[    0.729002] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
[    0.729046] DDR DEBUG: addr=0xd87000
[    0.729084] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.729125] DDR DEBUG: socAddr[0]=0xd87000, socAddr[1]=0xd87100
[    0.729166] DDR DEBUG: chAddr[0]=0xd87000, chAddr[1]=0xd87000
[    0.729212] DDR DEBUG: dtar[0]=0x701b0000, dtar[1]=0x701b0000
[    0.729373] DDR DEBUG: init success!!! freq=200MHz
[    0.729409] DDR DEBUG: Channel a:
[    0.729457] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
[    0.729516] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
[    0.729575] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
[    0.729633] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
[    0.729687] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.729730] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.729769] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.729803] DDR DEBUG: Channel b:
[    0.729849] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
[    0.729907] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
[    0.729965] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
[    0.730023] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
[    0.730075] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.730117] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.730156] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.806284] bio: create slab <bio-0> at 0
[    0.808141] Enter firefly_noatx8_init
[    0.809166] SCSI subsystem initialized
[    0.809664] usbcore: registered new interface driver usbfs
[    0.809819] usbcore: registered new interface driver hub
[    0.810108] usbcore: registered new device driver usb
[    0.813067] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.816778] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.817583] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.818393] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.819282] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.821576] media: Linux media interface: v0.10
[    0.821719] Linux video capture interface: v2.00
[    0.821876] pps_core: LinuxPPS API ver. 1 registered
[    0.821920] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.822003] PTP clock support registered
[    0.822410] rockchip_temp_probe,line=362
[    0.823198] tsadc ff280000.tsadc: initialized
[    0.824392] rockchip_ion_parse_dt: num_heaps = 1
[    0.824452] 0:  0  3  vmalloc  0x  (null)
[    0.825198] Rockchip ion module is successfully loaded (v1.0)
[    0.825702] Advanced Linux Sound Architecture Driver Initialized.
[    0.826856] Bluetooth: Core ver 2.16
[    0.827023] NET: Registered protocol family 31
[    0.827067] Bluetooth: HCI device and connection manager initialized
[    0.827129] Bluetooth: HCI socket layer initialized
[    0.827181] Bluetooth: L2CAP socket layer initialized
[    0.827288] Bluetooth: SCO socket layer initialized
[    0.827949] cfg80211: Calling CRDA to update world regulatory domain
[    0.830412] act8846_i2c_probe,line=880
[    0.831773] act8846_parse_dt,line=744
[    0.833130] act8846_i2c_probe: act8846_pmic_hold=1
[    0.833201] act8846_i2c_probe: act8846_pmic_sleep=1
[    0.835637] act_dcdc1: 1200 mV
[    0.839344] vccio: 3300 mV
[    0.841969] vdd_logic: 700 <--> 1500 mV at 1100 mV
[    0.845650] act_dcdc4: 2000 mV
[    0.847571] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[    0.850472] act_ldo2: 1050 mV
[    0.853318] act_ldo3: 1800 mV
[    0.856134] act_ldo4: 3300 mV
[    0.859056] act_ldo5: 3300 mV
[    0.861889] act_ldo6: 1100 mV
[    0.864733] vcc_18: 1800 mV
[    0.867576] act_ldo8: 1850 mV
[    0.873978] vdd_arm: 712 <--> 1500 mV at 1000 mV
[    0.880376] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[    0.885319] Switching to clocksource arch_sys_counter
[    0.915765] usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1
[    0.951493] rk-fb rockchip-fb: rk fb ion client create success!
[    0.951561] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.952600] rk-screen rk_screen.9: rockchip screen probe success
[    0.953343] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[    0.954059] rk32-edp ff970000.edp: screen is not edp!
[    0.954132] rk32-edp: probe of ff970000.edp failed with error -22
[    0.955317] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
[    0.956095] graphics fb0: rockchip framebuffer registerd:fb0
[    0.957166] graphics fb1: rockchip framebuffer registerd:fb1
[    0.957786] graphics fb2: rockchip framebuffer registerd:fb2
[    0.958323] graphics fb3: rockchip framebuffer registerd:fb3
[    0.958871] graphics fb4: rockchip framebuffer registerd:fb4
[    0.960493] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
[    0.960925] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[    0.960998] rk3288-lcdc lcdc0: wakeup from standby!
[    1.095474] alloc_buffer:ion_phy_addr=0x10000000
[    1.138793] fb0:phy:10000000>>vir:f0191000>>len:0x1800000
[    1.248586] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[    1.249757] rockchip_set_mux:warning ignore bank num 15
[    1.250197] rockchip_set_mux:warning ignore bank num 15
[    1.250597] rockchip_set_mux:warning ignore bank num 15
[    1.250988] rockchip_set_mux:warning ignore bank num 15
[    1.251373] rockchip_set_mux:warning ignore bank num 15
[    1.251763] rockchip_set_mux:warning ignore bank num 15
[    1.252642] rockchip_set_mux:warning ignore bank num 15
[    1.253142] rockchip_set_mux:warning ignore bank num 15
[    1.254008] rockchip_set_mux:warning ignore bank num 15
[    1.254505] rockchip_set_mux:warning ignore bank num 15
[    1.255318] rockchip_set_mux:warning ignore bank num 15
[    1.255805] rockchip_set_mux:warning ignore bank num 15
[    1.256605] rockchip_set_mux:warning ignore bank num 15
[    1.257119] rockchip_set_mux:warning ignore bank num 15
[    1.280539] NET: Registered protocol family 2
[    1.282031] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.282522] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.283019] TCP: Hash tables configured (established 8192 bind 8192)
[    1.283170] TCP: reno registered
[    1.283224] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.283357] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.283991] NET: Registered protocol family 1
[    1.284546] Unpacking initramfs...
[    1.794259] Freeing initrd memory: 2516K (c4bf0000 - c4e65000)
[    1.795955] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    1.797308] probe device ff9a0000.vpu_service
[    1.797743] vpu_service: power on
[    1.798898] checking hw id 4831
[    1.799988] vpu_service set to auto frequency mode
[    1.800158] vcodec vpu_service: vcodec ion client create success!
[    1.801303] vpu_service: power off...
[    1.801399] done
[    1.801432] init success
[    1.801603] probe device ff9c0000.hevc_service
[    1.802196] hevc_service: power on
[    1.803336] checking hw id 6867
[    1.804166] vcodec hevc_service: vcodec ion client create success!
[    1.805030] hevc_service: power off...
[    1.805126] done
[    1.805160] init success
[    1.805489] rknandbase v1.0 2014-03-31
[    1.805913] rknand_driver:ret = 0
[    1.806982] audit: initializing netlink socket (disabled)
[    1.807096] type=2000 audit(1.290:1): initialized
[    1.809350] bounce pool size: 64 pages
[    1.824775] fuse init (API version 7.22)
[    1.825994] msgmni has been set to 1456
[    1.832201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.832262] io scheduler noop registered
[    1.832303] io scheduler deadline registered
[    1.832623] io scheduler cfq registered (default)
[    1.834007] Console: switching to colour frame buffer device 240x67
[    1.882848] rga ff920000.rga: rga ion client create success!
[    1.883255] rga: Driver loaded succesfully
[    1.884674] IEP Power ON
[    1.884793] iep ion client create success!
[    1.885751] rk_iommu ff900800.iep_mmu: (iep) Enabled
[    1.885842] IEP Power OFF
[    1.885888] rk_iommu ff900800.iep_mmu: (iep) Disabled
[    1.885941] rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e272000
[    1.886004] IEP Driver loaded succesfully
[    1.886285] Module initialized.
[    1.888755] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.888827] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    1.893469] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.893541] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.894260] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
[    1.894325] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
[    1.894369] pwm_regulator_probe:error
[    1.894444] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
[    1.895507] rk_serial.c v1.8 2014-03-04
[    1.896151] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    1.896769] serial ff180000.serial: membase f017e000
[    1.906360] loop: module loaded
[    1.908132] SCSI Media Changer driver v0.25
[    1.909153] tun: Universal TUN/TAP device driver, 1.6
[    1.909202] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.910840] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    1.910897] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[    1.910946] stmmac_probe_config_dt: clock input or output? (input).
[    1.910992] stmmac_probe_config_dt: TX delay(0x30).
[    1.911032] stmmac_probe_config_dt: RX delay(0x10).
[    1.911142] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    1.911182] stmmc_pltfr_init:
[    1.911219] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[    1.911258] stmmc_pltfr_init: ERROR: Get reset-gpio failed.
[    1.911295] stmmc_pltfr_init: init for RGMII
[    1.911336] tx delay=0x30
[    1.911336] rx delay=0x10
[    1.912761] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.912802]  Normal descriptors
[    1.912834]  Ring mode enabled
[    1.912868]  DMA HW capability register supported
[    1.912908]  RX Checksum Offload Engine supported (type 2)
[    1.912947]  TX Checksum insertion supported
[    1.912981]  Wake-Up On Lan supported
[    1.913111]  Enable RX Mitigation via HW Watchdog Timer
[    1.914456] PPP generic driver version 2.4.2
[    1.914940] PPP BSD Compression module registered
[    1.914987] PPP Deflate Compression module registered
[    1.915050] PPP MPPE Compression module registered
[    1.915095] NET: Registered protocol family 24
[    1.915188] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    1.915238] CSLIP: code copyright 1989 Regents of the University of California.
[    1.915284] Rockchip WiFi SYS interface (V1.00) ...
[    1.915533] usbcore: registered new interface driver catc
[    1.915675] usbcore: registered new interface driver kaweth
[    1.915722] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.915878] usbcore: registered new interface driver pegasus
[    1.916017] usbcore: registered new interface driver rtl8150
[    1.916152] usbcore: registered new interface driver r8152
[    1.916193] hso: drivers/net/usb/hso.c: Option Wireless
[    1.916448] usbcore: registered new interface driver hso
[    1.916609] usbcore: registered new interface driver asix
[    1.916739] usbcore: registered new interface driver ax88179_178a
[    1.916904] usbcore: registered new interface driver cdc_ether
[    1.917032] usbcore: registered new interface driver cdc_eem
[    1.917156] usbcore: registered new interface driver dm9601
[    1.917278] usbcore: registered new interface driver dm9620
[    1.917432] usbcore: registered new interface driver smsc75xx
[    1.917586] usbcore: registered new interface driver smsc95xx
[    1.917721] usbcore: registered new interface driver gl620a
[    1.917849] usbcore: registered new interface driver net1080
[    1.917975] usbcore: registered new interface driver plusb
[    1.918101] usbcore: registered new interface driver rndis_host
[    1.918226] usbcore: registered new interface driver cdc_subset
[    1.918345] usbcore: registered new interface driver zaurus
[    1.918476] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.918721] usbcore: registered new interface driver int51x1
[    1.918876] usbcore: registered new interface driver kalmia
[    1.919010] usbcore: registered new interface driver ipheth
[    1.919153] usbcore: registered new interface driver sierra_net
[    1.919283] usbcore: registered new interface driver cx82310_eth
[    1.919439] usbcore: registered new interface driver cdc_ncm
[    1.919568] usbcore: registered new interface driver qmi_wwan
[    1.919708] usbcore: registered new interface driver cdc_mbim
[    1.919753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.922967] ehci_rk_probe f1a00000 f1a00010
[    1.923026] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
[    1.923124] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    1.924187] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    1.938445] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[    1.938680] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.938742] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.938796] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[    1.938847] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    1.938894] usb usb1: SerialNumber: ff500000.usb
[    1.940200] hub 1-0:1.0: USB hub found
[    1.940281] hub 1-0:1.0: 1 port detected
[    1.967930] ehci_rk_probe ok
[    1.968361] usbcore: registered new interface driver cdc_acm
[    1.968409] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.968593] usbcore: registered new interface driver usblp
[    1.968735] usbcore: registered new interface driver cdc_wdm
[    1.968960] usbcore: registered new interface driver usb-storage
[    1.969092] usbcore: registered new interface driver ums-alauda
[    1.969219] usbcore: registered new interface driver ums-cypress
[    1.969359] usbcore: registered new interface driver ums-datafab
[    1.969491] usbcore: registered new interface driver ums_eneub6250
[    1.969616] usbcore: registered new interface driver ums-freecom
[    1.969742] usbcore: registered new interface driver ums-isd200
[    1.969868] usbcore: registered new interface driver ums-jumpshot
[    1.969993] usbcore: registered new interface driver ums-karma
[    1.970121] usbcore: registered new interface driver ums-onetouch
[    1.970250] usbcore: registered new interface driver ums-sddr09
[    1.970378] usbcore: registered new interface driver ums-sddr55
[    1.970504] usbcore: registered new interface driver ums-usbat
[    1.970790] usbcore: registered new interface driver usbserial
[    1.970938] usbcore: registered new interface driver usbserial_generic
[    1.971051] usbserial: USB Serial support registered for generic
[    1.971189] usbcore: registered new interface driver option
[    1.971298] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.971534] usbcore: registered new interface driver trancevibrator
[    1.971580] usb20_otg: version 3.10a 21-DEC-2012
[    1.972633] f1a80040
[    1.972683] Core Release: 3.10a
[    1.972737] Setting default values for core params
[    1.973152] Using Buffer DMA mode
[    1.973195] Periodic Transfer Interrupt Enhancement - disabled
[    1.973235] Multiprocessor Interrupt Enhancement - disabled
[    1.973276] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.973313] ^^^^^^^^^^^^^^^^^Device Mode
[    1.973369] Dedicated Tx FIFOs mode
[    1.973431] pcd_init otg_dev = ee348dc0
[    1.973932] usb20_otg ff580000.usb: DWC OTG Controller
[    1.974032] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    1.974148] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    1.974337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.974398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.974450] usb usb2: Product: DWC OTG Controller
[    1.974496] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    1.974543] usb usb2: SerialNumber: ff580000.usb
[    1.975905] hub 2-0:1.0: USB hub found
[    1.975983] hub 2-0:1.0: 1 port detected
[    1.976880] usb20_host: version 3.10a 21-DEC-2012
[    1.980378] f1b00040
[    1.980426] Core Release: 3.10a
[    1.980465] Setting default values for core params
[    1.980868] Using Buffer DMA mode
[    1.980911] Periodic Transfer Interrupt Enhancement - disabled
[    1.980951] Multiprocessor Interrupt Enhancement - disabled
[    1.980992] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.981029] ^^^^^^^^^^^^^^^^^^Host Mode
[    1.981111] usb20_host ff540000.usb: DWC OTG Controller
[    1.981202] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    1.981307] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    1.981474] Init: Power Port (0)
[    1.981672] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.981733] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.981786] usb usb3: Product: DWC OTG Controller
[    1.981832] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    1.981879] usb usb3: SerialNumber: ff540000.usb
[    1.983234] hub 3-0:1.0: USB hub found
[    1.983312] hub 3-0:1.0: 1 port detected
[    1.984939] .. rk pwm remotectl v1.0 init
[    1.985192] remotectl probe j=0x0
[    1.985705] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[    1.986323] pwm enable val=0x646205
[    1.987230] usbcore: registered new interface driver xpad
[    1.987419] usbcore: registered new interface driver usb_acecad
[    1.987653] usbcore: registered new interface driver aiptek
[    1.987822] usbcore: registered new interface driver gtco
[    1.987978] usbcore: registered new interface driver hanwang
[    1.988133] usbcore: registered new interface driver kbtab
[    1.988323] usbcore: registered new interface driver wacom
[    1.989370] sensor_register_slave:mma8452,id=17
[    1.989421] sensor_register_slave:cm3217,id=44
[    1.989461] sensor_register_slave:cm3218,id=45
[    1.989498] tchip_rm_init is here!
[    1.991048] input: tchip_remote_key as /devices/virtual/input/input1
[    1.991453] tchiprm_register_device is here!
[    1.991927] input: tchip_remote_touch as /devices/virtual/input/input2
[    1.992312] tchip_remote_abs_register_device is here!
[    1.992773] input: tchip_remote_gsensor as /devices/virtual/input/input3
[    1.993149] tchip_remote_gsensor_register_device is here!
[    1.999976] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    2.000124] i2c /dev entries driver
[    2.002305] IR NEC protocol handler initialized
[    2.002352] IR RC5(x) protocol handler initialized
[    2.002389] IR RC6 protocol handler initialized
[    2.002425] IR JVC protocol handler initialized
[    2.002460] IR Sony protocol handler initialized
[    2.002496] IR RC5 (streamzap) protocol handler initialized
[    2.002533] IR SANYO protocol handler initialized
[    2.002569] IR MCE Keyboard/mouse protocol handler initialized
[    2.002824] usbcore: registered new interface driver uvcvideo
[    2.002867] USB Video Class driver (1.1.1)
[    2.002913] CamSys driver version: v0.19.0,  CamSys head file version: v0.8.0
[    2.006105] D1:camsys_platform_probe(1061): 1-gpios-cifpower: gpio=236
[    2.006188] D1:camsys_platform_probe(1064): gpios-cifpower: gpio_request
[    2.006254] D1:camsys_platform_probe(1066): 1-gpios-cifpower: gpio_request=0
[    2.006316] D1:camsys_platform_probe(1075): gpios-cifpower: 236 high
[    2.006529] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    2.006989] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xf19a8000  size: 0x4000)
[    2.009193] D1:camsys_platform_probe(1208): ff910000.isp memory:
[    2.009255] D1:camsys_platform_probe(1218):     Register memory (phy: 0xff910000 vir: 0xf19e0000 size: 0x10000)
[    2.009315] D1:camsys_platform_probe(1213):     I2c memory (phy: 0x2da6f000 vir: 0xeda6f000 size: 0x1000)
[    2.009366] D1:camsys_platform_probe(1233): Probe ff910000.isp device success
[    2.012231] device-mapper: uevent: version 1.0.3
[    2.012968] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    2.013918] Bluetooth: HCI UART driver ver 2.2
[    2.013973] Bluetooth: HCI H4 protocol initialized
[    2.014013] Bluetooth: HCILL protocol initialized
[    2.697542] cpufreq version 1.0, suspend freq 1200 MHz
[    2.698159] cpuidle: using governor ladder
[    2.698207] cpuidle: using governor menu
[    2.698329] Synopsys Designware Multimedia Card Interface Driver
[    2.699079] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    2.699919] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    2.700446] 3291..dw_mci_init_slot: fmin=400000, fmax=52000000 [mmc0]
[    2.700497] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    2.700951] 1381..dw_mci_set_ios:  no card. [mmc0]
[    2.715834] 1381..dw_mci_set_ios:  no card. [mmc0]
[    2.735436] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    2.735461] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    2.735474] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    2.735802] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    2.736644] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    2.736854] 3285..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
[    2.736872] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    2.737381] 1381..dw_mci_set_ios:  no card. [mmc1]
[    2.755094] 1381..dw_mci_set_ios:  no card. [mmc1]
[    2.774902] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    2.774921] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    2.775253] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    2.775469] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    2.775598] 3291..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    2.775613] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    2.775712] 1381..dw_mci_set_ios:  no card. [mmc2]
[    2.794432] 1381..dw_mci_set_ios:  no card. [mmc2]
[    2.814327] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    2.814340] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    2.814559] hidraw: raw HID events driver (C) Jiri Kosina
[    2.815895] usbcore: registered new interface driver usbhid
[    2.815907] usbhid: USB HID core driver
[    2.816185] ashmem: initialized
[    2.816306] logger: created 256K log 'log_main'
[    2.816399] logger: created 256K log 'log_events'
[    2.816490] logger: created 256K log 'log_radio'
[    2.816595] logger: created 256K log 'log_system'
[    2.817254] rk-keypad: probe of key.30 failed with error -307976704
[    2.817992] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
[    2.818023] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    2.818039] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
[    2.818144] u32 classifier
[    2.818152]     Actions configured
[    2.818165] Netfilter messages via NETLINK v0.30.
[    2.818223] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.818552] ctnetlink v0.93: registering with nfnetlink.
[    2.818627] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    2.818637] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    2.818909] xt_time: kernel timezone is -0000
[    2.819126] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.819263] arp_tables: (C) 2002 David S. Miller
[    2.819303] TCP: cubic registered
[    2.819311] Initializing XFRM netlink socket
[    2.819523] NET: Registered protocol family 10
[    2.820051] mip6: Mobile IPv6
[    2.820078] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.820199] sit: IPv6 over IPv4 tunneling driver
[    2.820543] NET: Registered protocol family 17
[    2.820570] NET: Registered protocol family 15
[    2.820625] Bridge firewalling registered
[    2.820639] Ebtables v2.0 registered
[    2.820800] Bluetooth: RFCOMM TTY layer initialized
[    2.820827] Bluetooth: RFCOMM socket layer initialized
[    2.820836] Bluetooth: RFCOMM ver 1.11
[    2.820844] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.820851] Bluetooth: BNEP filters: protocol multicast
[    2.820864] Bluetooth: BNEP socket layer initialized
[    2.820872] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.820885] Bluetooth: HIDP socket layer initialized
[    2.820914] l2tp_core: L2TP core driver, V2.0
[    2.820929] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.820937] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.821107] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.821119] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    2.821129] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.821139] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    2.821149] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.821173] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    2.821196] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    2.821206] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.821234] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[    2.821282] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.821323] [BT_RFKILL]: Enter rfkill_rk_init
[    2.821449] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    2.821469] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[    2.821486] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    2.821502] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    2.821518] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    2.821567] [BT_RFKILL]: Request irq for bt wakeup host
[    2.821672] [BT_RFKILL]: ** disable irq
[    2.821759] [BT_RFKILL]: ap6335 device registered.
[    2.837482] mmc0: BKOPS_EN bit is not set
[    2.856098] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
[    2.873570] mmc_host mmc0: Bus speed (slot 0) = 52000000Hz (slot req 52000000Hz, actual 52000000HZ div = 0)
[    2.873594] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    2.888734] rk_sdmmc: BOOT
[    2.888734]  execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_90       SDMMC_SHIFT_DEGREE_180  SDMMC_SHIFT_DEGREE_INVALID SDMMC_SHIFT_DEGREE_INVALID[mmc0]
[    2.893189] mmc0: new HS200 MMC card at address 0001
[    2.893495] mmcblk0: mmc0:0001 HAG2e 14.6 GiB
[    2.893796]   resource: 0x000400000 -- 0x001400000 (16 MB)
[    2.893808]       boot: 0x001400000 -- 0x002400000 (16 MB)
[    2.893819]       misc: 0x002400000 -- 0x002800000 (4 MB)
[    2.893827]     backup: 0x002800000 -- 0x005c00000 (52 MB)
[    2.893837]  linuxroot: 0x005c00000 -- 0x3ab400000 (14936 MB)
[    2.893856]  mmcblk0: p1 p2 p3 p4 p51381..dw_mci_set_ios:  no card. [mmc1]
[    2.895455] 1381..dw_mci_set_ios:  no card. [mmc2]
[    3.128976] [EDID] check header error
[    3.128988] rk3288-hdmi ff980000.hdmi: [HDMI] parse edid base block error
[    3.502903] [EDID] check header error
[    3.502913] rk3288-hdmi ff980000.hdmi: [HDMI] parse edid base block error
rror 3.876814] [Ey:D]tehein hrd fr
[    3.876823] rk3288-hdmi ff980000.hdmi: [HDMI] parsL edid , seealo k itro.
y:  ar3.se68ion 2k3 8-hdmi ff980000.hdmi: warning: EDID error, assume sink as DVI !!!!
ode parsed from EDID !!!!i ff980000.hdmi: waxni:s: rt Cec vone3
[    3.876857] ******** Show Sink Info ********
g es e 3i87 867vers ...  Support video mode:
[    3.876872]  3840x2160p@60Hz
[    3.876876]  3840x2160p@50Hz
[    3FA76L:0Cou        3840t2l6ap@/lHb
[ u es/3870.05m         3le4.xep16Np@suHh
                                          [l   r 87re89] y3840x2160
p@24Hz
[    3.876894]  1920x1080p@60Hz
[    3.876898]  1920x1080p@50Hz
[    3.876903]  1920x1080p@30Hz
[    3.876907]  1920x1080p@25Hz
[    3.876911]  1920x1080p@24Hz
[    3.876916]  1280x72FATAL: Could not0p@60H load /lib/modules/3.10.0/modules.dep: No such filez
or directory[   
3.876920]      1280x720p@50Hz
[    3.876924]  1280x720p@30Hz
[    3.876928]  1280x720p@25Hz
[    3.876932]  1280x720p@24Hz
[    3.876936]  720x576p@50Hz
[    3.876940]  720x480p@60Hz
[    3.876AT4]: uoulrtnotdeo co oradodli
mo   3.876/4910 0/mo
                    [l  .de8: N6 53]hSfipo rt  ideectolyr depth:
[    3.876957]  24bit
[ FATAL87Co6ld Sotpora audib/topele
ow Sinknenf                        [/  10.0/6o6u]es*****p: No such file or directory
           o ********
[    3.876983]
[    3.876983] rk_fb_egitchRucnien /sdcipd 0 nite reeoant ..e 1
[    3.876994] fb0 win id 1 state 1
[    3.877059] rk3288-lcdc lcdc0: lcdc0: dclk:74250000>>fps:60
[    3.877083] fb1 win id 0 state 0
[    3.877089] fb2 win id 2 state 0
[    3.877095] fb3 win id 3 state 0
[ on 3
77100] fb4 win iBe4 n:atou0ti[   oo.8fi1e ] ste  ..3.877105] rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
[    3.877105]
[    3.877122] pixel clk is 7425eg00: mun cng /scr42t00lo
fig_video] sucess output DVI.980000.hdmi: [hdmi_devxto
[Be  n:88un39ngrk32r8-tsmiocf9-p00moudm . r 3288 hdmi probe sucess.
le /3 30.08mo4]lek1d00: od s 4h 06le orc_irantoer
returned -11
[    3.910446] rk1000_coddo 4.0
                               60: i2c_transfer() retTAne C-1ld
                                                               [ot l3.d 29ib] od10es_3.de.0prode est=ex0 N[ su 3 f13e 4r dgrerkor00
                                                                                                                                   standby
[    3.914884] rk1000_codec 4-0060: ASoC: no sink widget found for Mic Bias1
[    3.914895] rk1000_codec 4-0060: ASoC: Failed to add route Mic Jack -> direct -> Mic Bias1
[    3.914903] rk1000_codec 4-0060: ASoC: no source widget found for Mic Bias1
[    3.914911] rk1000_codec 4-0060: ASoC: Failed to add route Mic Bias1 -> direct -> MIC1
[    3.914919] rk1000_codec 4-0060: ASoC: no source widget found for HPOL
[    3.914927] rk1000_codec 4-0060: ASoC: Failed to add route HPOL -> direct -> Headphone Jack
[    3.914935] rk1000_codec 4-0060: ASoC: no source widget found for HPOR
[    3.914942] rk1000_codec 4-0060: ASoC: Failed to add route HPOR -> direct -> Headphone Jack
[    3.914950] rk1000_codec 4-0060: ASoC: no source widget found for SPOL
[    3.914957] rk1000_codec 4-0060: ASoC: Failed to add route SPOL -> direct -> Ext Spk
[    3.914965] rk1000_codec 4-0060: ASoC: no source widget found for SPOR
[    3.914972] rk1000_codec 4-0060: ASoC: Failed to add route SPOR -> direct -> Ext Spk
[    3.914980] rk1000_codec 4-0060: ASoC: DAPM unknown pin HP_L
[    3.914987] rk1000_codec 4-0060: ASoC: DAPM unknown pin HP_R
[    3.918310] rockchip-rk1000 rockchip-rk1000.28:  rk1000_codec <-> rockchip-i2s.0 mapping ok
[    3.919021] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    3.919040] rk3288_init_suspend
[    3.919048] rk3288_suspend_init enter
[    3.919185] rk3288_suspend_init: pm_ctrbits =40017
[    3.919218] gpio_get_dts_info suspend:8
[    3.919224] gpio_get_dts_info resume:8
[    3.919230] rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    3.919254] rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    3.919377] clks_gating_suspend_init:clkgt info ok
[    3.919464] Registering SWP/SWPB emulation handler
[    3.919747] ddrfreq: verion 1.2 20140526
[    3.919758] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
[    3.919766] ddrfreq: auto-freq=0
[    3.919771] ddrfreq: auto-freq-table[0] 240MHz
[    3.919777] ddrfreq: auto-freq-table[1] 324MHz
[    3.919782] ddrfreq: auto-freq-table[2] 456MHz
[    3.919787] ddrfreq: auto-freq-table[3] 528MHz
[    3.921551] act_ldo8: disabling
[    3.922388] act_ldo4: disabling
[    3.923218] act_ldo3: disabling
[    3.924047] act_ldo2: disabling
[    3.924658] regulator-dummy: disabling
[    3.924919] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
[    3.924942] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    3.924956] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
[    3.925041] pcd_pullup, is_on 0
[    3.925076] file system registered
[    3.925597] android_usb gadget: Mass Storage Function,eger: onnn20g /s9/ip
/lo  l-92t60m  a. roid_usb gadgene
doer.ofxLU:s=2rt[ ec 3o9 461
                            ]  lun0: LBN:inemRuabin f/lcr (ts mniiubo
o  ..3.925619]  lun1: LUN: removable file: (no medium)
[    3.925734] android_usb gadget: android_usb ready
[    3.925789] sensor_init: Probe name sensors
t between two gsensors 2013-09-01ioupp
ed new interface driver snd-usb-audio utaco s: tigist c tst20t -0ct01n16
[    3.931588] ALSA device list:
[    3.931593]   #0: RK_RK1000
[    3.932885] Freeing unused kernel memory: 2364K (c0a91000 - c0ce0000)
[    3.933264] rockchip-hdmi-spdif rockchip-hdmi-spdif.27:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[    3.945730]
[    3.945730] rk_fb_switch_screen lcdc_id 0 type 6 enable 0
[    3.962352] udevd[136]: starting version 175
[    4.365787] EXT4-fs (mmcblk0p5): recovery complete
[    4.366440] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
SELinux:  Could not open policy file <= /etc/selinux/targeted/policy/policy.29:  No such file or directory
[    4.614412] init: plymouth-upstart-bridge main process (275) terminated with status 1
[    4.614510] init: plymouth-upstart-bridge main process ended, respawning
[    4.633624] init: plymouth-upstart-bridge main process (285) terminated with status 1
[    4.633705] init: plymouth-upstart-bridge main process ended, respawning
[    4.642257] init: plymouth-upstart-bridge main process (288) terminated with status 1
[    4.642306] init: plymouth-upstart-bridge main process ended, respawning
[    4.653241] init: plymouth-upstart-bridge main process (289) terminated with status 1
[    4.653308] init: plymouth-upstart-bridge main process ended, respawning
[    4.672622] init: ureadahead main process (278) terminated with status 5
[    4.788444] init: mounted-proc main process (303) terminated with status 1
* Starting Mount filesystems on boot[ OK ]
* Starting Signal sysvinit that the rootfs is mounted[ OK ]
* Starting Populate and link to /run filesystem[ OK ]
* Stopping Populate and link to /run filesystem[ OK ]
* Starting Initialize or finalize resolvconf[ OK ]
* Starting Clean /tmp directory[ OK ]
* Stopping Track if upstart is running in a container[ OK ]
* Stopping Clean /tmp directory[ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
* Starting Bridge udev events into upstart[ OK ]
* Starting Signal sysvinit that remote filesystems are mounted[ OK ]
* Starting device node and kernel event manager[ OK ]
* Starting Signal sysvinit that local filesystems are mounted[ OK ]
* Starting restore software rfkill state[ OK ]
* Starting load modules from /etc/modules[ OK ]
* Starting cold plug devices[ OK ]
* Starting log initial device creation[ OK ]
* Stopping Mount filesystems on boot[ OK ]
* Stopping restore software rfkill state[ OK ]
* Stopping load modules from /etc/modules[ OK ]
* Starting flush early job output to logs[ OK ]
* Stopping flush early job output to logs[ OK ]
* Starting D-Bus system message bus[ OK ]
* Starting SystemD login management service[ OK ]
* Starting set console font[ OK ]
* Stopping set console font[ OK ]
* Starting userspace bootsplash[ OK ]
* Starting Send an event to indicate plymouth is up[ OK ]
* Starting configure network device security[ OK ]
* Starting configure network device[ OK ]
* Stopping Send an event to indicate plymouth is up[ OK ]
* Starting system logging daemon[ OK ]
* Stopping userspace bootsplash[ OK ]
* Starting bluetooth initialization[ OK ]
* Starting bluetooth initialization[fail]
* Starting bluetooth daemon[ OK ]
* Starting configure network device security[ OK ]
* Starting configure network device security[ OK ]
* Starting configure network device[ OK ]
* Starting Mount network filesystems[ OK ]
* Starting Failsafe Boot Delay[ OK ]
* Starting configure network device[ OK ]
* Stopping Failsafe Boot Delay[ OK ]
* Stopping Mount network filesystems[ OK ]
* Starting System V initialisation compatibility[ OK ]
* Starting configure network device security[ OK ]
* Starting Turn on/off the ap6335 bluetooth[ OK ]
[ OK ]ting up X socket directories...        
* Stopping System V initialisation compatibility[ OK ]
* Starting System V runlevel compatibility[ OK ]
* Starting save kernel messages[ OK ]
* Starting configure network device security[ OK ]
* Starting anac(h)ronistic cron[ OK ]
* Starting regular background program processing daemon[ OK ]
* Stopping save kernel messages[ OK ]
* Starting configure virtual network devices[ OK ]
* Stopping Restore Sound Card State[ OK ]
* Starting OpenSSH server[ OK ]
[    6.512341] turn on mali power
* Stopping System V runlevel compatibility[ OK ]
回复

使用道具 举报

52

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
52
发表于 2015-10-28 15:10:25        只看该作者  沙发
各位有没有遇到,firefly代码跑ubuntu的时候,出现过,卡在* Stopping System V runlevel compatibility[ OK ] 的情况。
回复

使用道具 举报

发表于 2015-10-28 17:06:31        只看该作者  板凳
好长的log,楼主的内核修改了哪里?先定位一下
暴走的创客!
回复

使用道具 举报

52

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
52
发表于 2015-10-28 18:22:49        只看该作者  地板
主要适配硬件做了dts修改
回复

使用道具 举报

52

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
52
发表于 2015-10-28 18:33:50        只看该作者  5#
附件这是我的dts配置,请大神帮忙检查一下
回复

使用道具 举报

52

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
52
发表于 2015-10-29 19:46:21        只看该作者  6#
DVFS ERR:        dvfs_regulator_set_voltage_readback: now read back to check voltage
回复

使用道具 举报

52

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
52
发表于 2015-10-29 19:47:50        只看该作者  7#
搞了一下,终于不再init进程里面,看到ubuntu啦。进到tty2终端中啦,但是还是出错,
Ubuntu 14.04.1 LTS firefly ttyS2

firefly login: root (automatic login)

[   59.636452] BUG: soft lockup - CPU#0 stuck for 21s! [upstart-udev-br:460]
[   65.156718] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   65.353532] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   65.550326] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   65.553319] DVFS ERR:        dvfs_regulator_set_voltage_readback: now read back to check voltage
[   65.747112] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   65.750096] DVFS ERR:        dvfs_regulator_set_voltage_readback: set ERROR AND NOT effected, volt=937500
[   65.750220] DVFS ERR:        dvfs_scale_volt_direct: vd_arm set voltage up err ret = -110, Vnew = 1200000(was 937500)mV
[   65.943927] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   66.140727] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   66.337511] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   66.340502] DVFS ERR:        dvfs_regulator_set_voltage_readback: now read back to check voltage
[   66.534327] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   66.537310] DVFS ERR:        dvfs_regulator_set_voltage_readback: set ERROR AND NOT effected, volt=937500
[   66.537434] DVFS ERR:        dvfs_scale_volt_direct: vd_arm set voltage up err ret = -110, Vnew = 1200000(was 937500)mV
[   66.731126] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   66.927911] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   67.124727] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   67.127718] DVFS ERR:        dvfs_regulator_set_voltage_readback: now read back to check voltage
[   67.321527] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   67.324510] DVFS ERR:        dvfs_regulator_set_voltage_readback: set ERROR AND NOT effected, volt=937500
[   67.324633] DVFS ERR:        dvfs_scale_volt_direct: vd_arm set voltage up err ret = -110, Vnew = 1200000(was 937500)mV
[   67.518312] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   67.715125] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   67.911926] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[   67.914917] DVFS ERR:        dvfs_regulator_set_voltage_readback: now read back to check voltage
[   68.108711] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd:
请各位大神继续帮忙看看
回复

使用道具 举报

2918

积分

56

威望

46

贡献

高级创客

Rank: 6Rank: 6

积分
2918

优秀版主论坛元老

发表于 2015-10-30 09:32:40        只看该作者  8#
用的是哪个板子?
回复

使用道具 举报

100

积分

0

威望

0

贡献

技术小白

积分
100
发表于 2015-10-31 09:47:06        只看该作者  9#
i2c busy了,要排查下哪里影响到了那个DCDC,
回复

使用道具 举报

13

积分

0

威望

0

贡献

游客

积分
13
发表于 2015-11-7 10:20:12        只看该作者  10#
楼主怎么解决了,能不能说下?
回复

使用道具 举报

返回列表
12
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表