|
|
【Linux】
制作ubuntu16.04 update.img 在firefly rk3399 板子上升级启动不了
发表于 2018-11-22 12:25:11
浏览：11870
|
回复：8
打印
只看该作者
[复制链接]
楼主
我在官网上下载了
内核:4.4.154 https://github.com/rockchip-linux/kernel
编译后生成 kernel.img resource.img
uboot:1.15.115 https://github.com/rockchip-linux/u-boot
编译后生成 rk3399_loader_v1.15.115.bin trust.img uboot.img
再下载 官网提供的 ubuntu1604arm64-rootfs.img 文件系统，
paramter 文件：
FIRMWARE_VER: 6.0.1
MACHINE_MODEL: RK3399
MACHINE_ID: 007
MANUFACTURER: RK3399
MAGIC: 0x5041524B
ATAG: 0x00200800
MACHINE: 3399
CHECK_MASK: 0x80
PWR_HLD: 0,0,A,0,1
#KERNEL_IMG: 0x00280000
#FDT_NAME: rk-kernel.dtb
#RECOVER_KEY: 1,1,0,20,0
#in section; per section 512(0x200) bytes
CMDLINE: console=ttyFIQ0 root=/dev/mmcblk1p6 rw rootwait mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00008000@0x00006000(resource),0x0000A000@0x0000E000(kernel),0x00002000@0x00018000(backup),-@0x0001A000(rootfs)
再通过mkupdate.bat 制作update.img 镜像 。
通过 RKdevTool v2.54 工具烧入板子上。烧写成功后自动重启，但是一直启动不了启动log如下
DDR Version 1.15 20181010
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA17AA1, stride = 0xD
OUT
Boot1: 2018-08-06, version: 1.15
CPUId = 0x0
ChipType = 0x10, 213
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=119276MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67278
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT 0x3190d20 signature is wrong
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xab0f0
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):4f4079b
NOTICE: BL31: Built : 17:40:23, Oct 11 2018
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1151): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
ERR [0x0] TEE-CORE:atags_get_tag:146: atags_get_tag: find unknown magic(f5fff9ff)
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-187-g3f0aafa6 #11 Wed Oct 31 06:55:31 UTC 2018 aarch64)
INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-01990-gb34cbcd (Nov 22 2018 - 10:51:38 +0800)
Model: Firefly-RK3399 Board
DRAM: 3.8 GiB
Relocation Offset is: f7d14000
PMIC: RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
pwm-regulator(vdd-log): init 950000 uV
vdd_log 950000 uV
regulator(vdd-log) init 950000 uV
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
*** Warning - bad CRC, using default environment
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Firefly-RK3399 Board
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
get part misc fail -1
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 2 1 0
android_bootloader_boot_flow Could not find misc partition
get part misc fail -1
ANDROID: reboot reason: "(none)"
android_bootloader_boot_flow Could not found bootable partition boot
Android boot failed, error -1.
get part misc fail -1
=Booting Rockchip format image=
rootfs: invalid image tag(0x0)
boot_rockchip_image ramdisk part rootfs read error
get part misc fail -1
init_resource_list: failed to get boot part, ret=-1
DTB: rk-kernel.dtb
kernel @ 0x02080000 (0x01292008)
ramdisk @ 0x0a200000 (0x00000000)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to 08200000, end 08200000 ... OK
Loading Device Tree to 00000000081e5000, end 00000000081ffbda ... OK
Adding bank: start=0x00200000, size=0x08200000
Adding bank: start=0x0a200000, size=0xede00000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.154 (emel@workpc) (gcc version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #2 SMP Wed Nov 21 14:22:17 CST 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ed6000 s45824 r8192 d32000 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 991752
[ 0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc rw rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0
root=PARTUUID=614e0000-0000 rootfstype=ext4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0xf7e8d000-0xf7ecd000] (0MB) mapped at [ffffffc0f7e8d000-ffffffc0f7eccfff]
[ 0.000000] Memory: 3937356K/4030464K available (11710K kernel code, 1672K rwdata, 4420K rodata, 1152K init, 761K bss, 93108K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8009050000 - 0xffffff8009170000 ( 1152 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008bf0000 ( 11712 KB)
[ 0.000000] .rodata : 0xffffff8008bf0000 - 0xffffff8009050000 ( 4480 KB)
[ 0.000000] .data : 0xffffff8009170000 - 0xffffff8009312008 ( 1673 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a300000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a290000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a2a0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002149] Console: colour dummy device 80x25
[ 0.002592] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.003583] pid_max: default: 32768 minimum: 301
[ 0.004163] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004817] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006262] Initializing cgroup subsys devices
[ 0.006698] Initializing cgroup subsys freezer
[ 0.007156] ftrace: allocating 42093 entries in 165 pages
[ 0.112326] sched-energy: Sched-energy-costs installed from DT
[ 0.112894] CPU0: update cpu_capacity 401
[ 0.113341] ASID allocator initialised with 32768 entries
[ 0.116862] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.118213] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.120429] Detected VIPT I-cache on CPU1
[ 0.120461] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.120491] CPU1: using LPI pending table @0x0000000000330000
[ 0.120531] CPU1: update cpu_capacity 401
[ 0.120535] CPU1: Booted secondary processor [410fd034]
[ 0.121081] Detected VIPT I-cache on CPU2
[ 0.121102] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.121129] CPU2: using LPI pending table @0x0000000000350000
[ 0.121156] CPU2: update cpu_capacity 401
[ 0.121159] CPU2: Booted secondary processor [410fd034]
[ 0.121677] Detected VIPT I-cache on CPU3
[ 0.121697] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.121723] CPU3: using LPI pending table @0x00000000003a0000
[ 0.121749] CPU3: update cpu_capacity 401
[ 0.121752] CPU3: Booted secondary processor [410fd034]
[ 0.122301] Detected PIPT I-cache on CPU4
[ 0.122328] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.122367] CPU4: using LPI pending table @0x00000000003e0000
[ 0.122405] CPU4: update cpu_capacity 1024
[ 0.122408] CPU4: Booted secondary processor [410fd082]
[ 0.122962] Detected PIPT I-cache on CPU5
[ 0.122980] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.123016] CPU5: using LPI pending table @0x00000000f2c10000
[ 0.123041] CPU5: update cpu_capacity 1024
[ 0.123044] CPU5: Booted secondary processor [410fd082]
[ 0.123129] Brought up 6 CPUs
[ 0.135513] SMP: Total of 6 processors activated.
[ 0.135965] CPU features: detected feature: GIC system register CPU interface
[ 0.136657] CPU: All CPU(s) started at EL2
[ 0.137088] alternatives: patching kernel code
[ 0.138883] devtmpfs: initialized
[ 0.155281] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.156228] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.157286] pinctrl core: initialized pinctrl subsystem
[ 0.158512] NET: Registered protocol family 16
[ 0.163282] cpuidle: using governor ladder
[ 0.167292] cpuidle: using governor menu
[ 0.167702] Registered FIQ tty driver
[ 0.168315] vdso: 2 pages (1 code @ ffffff8008bf6000, 1 data @ ffffff8009174000)
[ 0.169033] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.169841] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.193714] console [ttyFIQ0] enabled
[ 0.193714] console [ttyFIQ0] enabled
[ 0.194398] bootconsole [uart0] disabled
[ 0.194398] bootconsole [uart0] disabled
[ 0.195329] Registered fiq debugger ttyFIQ0
[ 0.225113] iommu: Adding device ff650000.vpu_service to group 0
[ 0.225714] iommu: Adding device ff660000.rkvdec to group 1
[ 0.226303] iommu: Adding device ff8f0000.vop to group 2
[ 0.226840] iommu: Adding device ff900000.vop to group 3
[ 0.227418] iommu: Adding device ff910000.cif_isp to group 4
[ 0.229399] SCSI subsystem initialized
[ 0.229906] usbcore: registered new interface driver usbfs
[ 0.230447] usbcore: registered new interface driver hub
[ 0.230987] usbcore: registered new device driver usb
[ 0.231502] media: Linux media interface: v0.10
[ 0.231929] Linux video capture interface: v2.00
[ 0.232382] pps_core: LinuxPPS API ver. 1 registered
[ 0.232834] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.233656] PTP clock support registered
[ 0.235046] Advanced Linux Sound Architecture Driver Initialized.
[ 0.236062] Bluetooth: Core ver 2.21
[ 0.236399] NET: Registered protocol family 31
[ 0.236796] Bluetooth: HCI device and connection manager initialized
[ 0.237370] Bluetooth: HCI socket layer initialized
[ 0.237806] Bluetooth: L2CAP socket layer initialized
[ 0.238280] Bluetooth: SCO socket layer initialized
[ 0.239743] clocksource: Switched to clocksource arch_sys_counter
[ 0.288085] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.288996] NET: Registered protocol family 2
[ 0.289812] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.290707] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.292145] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.292828] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.293517] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.294446] NET: Registered protocol family 1
[ 0.295152] RPC: Registered named UNIX socket transport module.
[ 0.295685] RPC: Registered udp transport module.
[ 0.296124] RPC: Registered tcp transport module.
[ 0.296545] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.298174] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.298993] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.302712] Initialise system trusted keyring
[ 0.310898] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.312172] NFS: Registering the id_resolver key type
[ 0.312633] Key type id_resolver registered
[ 0.313023] Key type id_legacy registered
[ 0.313437] fuse init (API version 7.23)
[ 0.314178] SGI XFS with security attributes, no debug enabled
[ 0.319505] NET: Registered protocol family 38
[ 0.319939] Key type asymmetric registered
[ 0.320309] Asymmetric key parser 'x509' registered
[ 0.320908] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.321569] io scheduler noop registered
[ 0.321938] io scheduler deadline registered
[ 0.322432] io scheduler cfq registered (default)
[ 0.324428] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
[ 0.329845] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 0.330426] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 0.331016] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 0.872792] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 0.873516] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 0.875292] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 0.876200] rk-vcodec ff650000.vpu_service: probe device
[ 0.876985] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[ 0.878344] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 0.878980] rk-vcodec ff650000.vpu_service: init success
[ 0.879887] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 0.880942] rk-vcodec ff660000.rkvdec: probe device
[ 0.881579] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[ 0.882552] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 0.883140] rk-vcodec ff660000.rkvdec: init success
[ 0.884981] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.885649] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.887879] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.888547] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.890433] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 0.892598] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.893691] rockchip-pinctrl pinctrl: pin gpio4-19 already requested by fiq-debugger; cannot claim for ff1a0000.serial
[ 0.894642] rockchip-pinctrl pinctrl: pin-147 (ff1a0000.serial) status -22
[ 0.895259] rockchip-pinctrl pinctrl: could not request pin 147 (gpio4-19) from group uart2c-xfer on device rockchip-pinctrl
[ 0.896258] dw-apb-uart ff1a0000.serial: Error applying setting, reverse things back
[ 0.897242] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
[ 0.899053] [drm] Initialized drm 1.1.0 20060810
[ 0.902419] [drm] Rockchip DRM driver version: v1.0.1
[ 0.903181] rockchip-drm display-subsystem: dmc is disabled
[ 0.903961] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 0.904786] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c8eaa0)
[ 0.905517] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 0.906302] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c8eaa0)
[ 0.907276] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 0.907882] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 0.908658] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 0.910212] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008c85048)
[ 0.910944] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.911526] [drm] No driver support for vblank timestamp query.
[ 0.912219] rockchip-drm display-subsystem: failed to parse loader memory
[ 1.041143] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
[ 1.162355] Console: switching to colour frame buffer device 240x67
[ 1.243533] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.253378] mali ff9a0000.gpu: Failed to get regulator
[ 1.253857] mali ff9a0000.gpu: Power control initialization failed
[ 1.254989] Unable to detect cache hierarchy for CPU 0
[ 1.256283] brd: module loaded
[ 1.261700] loop: module loaded
[ 1.262530] zram: Added device: zram0
[ 1.263145] lkdtm: No crash points registered, enable through debugfs
[ 1.265481] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 1.266118] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 1.266622] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 1.267150] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 1.267880] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 1.268497] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 1.274049] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 1.274662] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.275116] Ring mode enabled
[ 1.275387] DMA HW capability register supported
[ 1.275792] Normal descriptors
[ 1.276097] RX Checksum Offload Engine supported (type 2)
[ 1.276585] TX Checksum insertion supported
[ 1.276966] Wake-Up On Lan supported
[ 1.277327] Enable RX Mitigation via HW Watchdog Timer
[ 1.342901] libphy: stmmac: probed
[ 1.343211] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 1.343792] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 1.345500] usbcore: registered new interface driver rndis_wlan
[ 1.346374] Rockchip WiFi SYS interface (V1.00) ...
[ 1.346947] usbcore: registered new interface driver rtl8150
[ 1.347493] usbcore: registered new interface driver r8152
[ 1.348064] usbcore: registered new interface driver asix
[ 1.348588] usbcore: registered new interface driver ax88179_178a
[ 1.349183] usbcore: registered new interface driver cdc_ether
[ 1.349758] usbcore: registered new interface driver rndis_host
[ 1.350364] usbcore: registered new interface driver cdc_ncm
[ 1.350926] usbcore: registered new interface driver cdc_mbim
[ 1.353392] rockchip-dwc3 usb0: failed to get drvdata dwc3
[ 1.358664] rockchip-dwc3 usb1: fail to get drvdata hcd
[ 1.360893] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.361491] ehci-pci: EHCI PCI platform driver
[ 1.362028] ehci-platform: EHCI generic platform driver
[ 1.366609] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.367385] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[ 1.368242] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[ 1.374775] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.375540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.376166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376820] usb usb1: Product: EHCI Host Controller
[ 1.377255] usb usb1: Manufacturer: Linux 4.4.154 ehci_hcd
[ 1.377758] usb usb1: SerialNumber: fe3c0000.usb
[ 1.378822] hub 1-0:1.0: USB hub found
[ 1.379196] hub 1-0:1.0: 1 port detected
[ 1.380345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.380925] ohci-platform: OHCI generic platform driver
[ 1.382088] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.382959] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 1.383793] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[ 1.438957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.439565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.440218] usb usb2: Product: Generic Platform OHCI controller
[ 1.440759] usb usb2: Manufacturer: Linux 4.4.154 ohci_hcd
[ 1.441250] usb usb2: SerialNumber: fe3e0000.usb
[ 1.442301] hub 2-0:1.0: USB hub found
[ 1.442674] hub 2-0:1.0: 1 port detected
[ 1.444355] usbcore: registered new interface driver cdc_acm
[ 1.444871] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.445629] usbcore: registered new interface driver cdc_wdm
[ 1.446200] usbcore: registered new interface driver uas
[ 1.446795] usbcore: registered new interface driver usb-storage
[ 1.447436] usbcore: registered new interface driver usbserial
[ 1.448008] usbcore: registered new interface driver usbserial_generic
[ 1.448621] usbserial: USB Serial support registered for generic
[ 1.449217] usbcore: registered new interface driver cp210x
[ 1.449757] usbserial: USB Serial support registered for cp210x
[ 1.450348] usbcore: registered new interface driver ftdi_sio
[ 1.450911] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.451708] usbcore: registered new interface driver keyspan
[ 1.452256] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 1.452999] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 1.453678] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 1.454375] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 1.455088] usbcore: registered new interface driver option
[ 1.455613] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.456424] usbcore: registered new interface driver oti6858
[ 1.456972] usbserial: USB Serial support registered for oti6858
[ 1.457553] usbcore: registered new interface driver pl2303
[ 1.458088] usbserial: USB Serial support registered for pl2303
[ 1.458664] usbcore: registered new interface driver qcserial
[ 1.459220] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.459912] usbcore: registered new interface driver sierra
[ 1.460437] usbserial: USB Serial support registered for Sierra USB modem
[ 1.462561] usbcore: registered new interface driver usbtouchscreen
[ 1.464056] i2c /dev entries driver
[ 1.466280] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 1.467047] fan53555-reg: supplied by vcc5v0_sys
[ 1.470010] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 1.470710] fan53555-reg: supplied by vcc5v0_sys
[ 1.474280] rk808 0-001b: Pmic Chip id: 0x0
[ 1.478432] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.479064] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.479823] DCDC_REG1: supplied by vcc3v3_sys
[ 1.481181] DCDC_REG2: supplied by vcc3v3_sys
[ 1.482315] DCDC_REG3: supplied by vcc3v3_sys
[ 1.483127] DCDC_REG4: supplied by vcc3v3_sys
[ 1.484132] LDO_REG1: supplied by vcc3v3_sys
[ 1.485850] LDO_REG2: supplied by vcc3v3_sys
[ 1.487402] LDO_REG3: supplied by vcc3v3_sys
[ 1.488989] LDO_REG4: supplied by vcc3v3_sys
[ 1.490550] LDO_REG5: supplied by vcc3v3_sys
[ 1.492116] LDO_REG6: supplied by vcc3v3_sys
[ 1.493692] LDO_REG7: supplied by vcc3v3_sys
[ 1.495273] LDO_REG8: supplied by vcc3v3_sys
[ 1.496852] SWITCH_REG1: supplied by vcc3v3_sys
[ 1.497716] SWITCH_REG2: supplied by vcc3v3_sys
[ 1.502006] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 1.503069] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009576000
[ 1.504814] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009578000
[ 1.505595] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[ 1.506539] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[ 1.507139] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xfer on device rockchip-pinctrl
[ 1.508132] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[ 1.509313] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff800957a000
[ 1.511640] fusb302 4-0022: Can't get property of role, set role to default DRP
[ 1.520934] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 1.521766] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff800957c000
[ 1.523978] IR NEC protocol handler initialized
[ 1.525624] usbcore: registered new interface driver uvcvideo
[ 1.526151] USB Video Class driver (1.1.1)
[ 1.530241] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 1.531244] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[ 1.532958] Bluetooth: Virtual HCI driver ver 1.5
[ 1.533484] Bluetooth: HCI UART driver ver 2.3
[ 1.533905] Bluetooth: HCI UART protocol H4 registered
[ 1.534361] Bluetooth: HCI UART protocol LL registered
[ 1.534825] Bluetooth: HCI UART protocol ATH3K registered
[ 1.535366] usbcore: registered new interface driver bfusb
[ 1.535918] usbcore: registered new interface driver btusb
[ 1.536867] cpu cpu0: leakage=25
[ 1.538398] cpu cpu4: leakage=46
[ 1.540527] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 1.542367] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 1.545074] sdhci: Secure Digital Host Controller Interface driver
[ 1.545623] sdhci: Copyright(c) Pierre Ossman
[ 1.546036] Synopsys Designware Multimedia Card Interface Driver
[ 1.547368] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.548052] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.548655] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.549217] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 1.550153] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 1.550701] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 1.552084] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.552759] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.553360] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.553918] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[ 1.554887] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[ 1.555664] vcc_sd: unsupportable voltage range: 3300000-3000000uV
[ 1.556238] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 1.556906] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 1.567796] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.579012] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 1.579912] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.582171] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 1.582697] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 1.609840] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 1.611572] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.612644] usbcore: registered new interface driver usbhid
[ 1.613185] usbhid: USB HID core driver
[ 1.616062] usbcore: registered new interface driver snd-usb-audio
[ 1.634509] Initializing XFRM netlink socket
[ 1.635549] NET: Registered protocol family 10
[ 1.637410] NET: Registered protocol family 17
[ 1.637871] NET: Registered protocol family 15
[ 1.638612] Bluetooth: RFCOMM socket layer initialized
[ 1.639278] Bluetooth: RFCOMM ver 1.11
[ 1.639651] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.640213] Bluetooth: HIDP socket layer initialized
[ 1.640712] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.641433] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.641909] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
[ 1.642516] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.643159] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.643884] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[ 1.644679] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 1.645329] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.645807] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.646281] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.647023] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[ 1.647779] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[ 1.648499] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[ 1.649228] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[ 1.649961] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[ 1.650607] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.651126] [BT_RFKILL]: ** disable irq
[ 1.651593] [BT_RFKILL]: bt_default device registered.
[ 1.652121] Key type dns_resolver registered
[ 1.653470] Registered cp15_barrier emulation handler
[ 1.654084] Registered setend emulation handler
[ 1.655068] Loading compiled-in X.509 certificates
[ 1.655373] mmc1: MAN_BKOPS_EN bit is not set
[ 1.657509] phy phy-ff770000.syscon:usb2-phy@e450.7: Failed to get VBUS supply regulator
[ 1.660816] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 1.661664] mali ff9a0000.gpu: Protected mode not available
[ 1.662916] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 1.663776] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 1.665941] mali ff9a0000.gpu: Probed as mali0
[ 1.668748] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 1.670313] mmcblk1: mmc1:0001 DJNB4R 116 GiB
[ 1.670962] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 1.671385] mmcblk1boot0: mmc1:0001 DJNB4R partition 1 4.00 MiB
[ 1.671992] mmcblk1boot1: mmc1:0001 DJNB4R partition 2 4.00 MiB
[ 1.672284] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
[ 1.672475] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.672536] xhci-hcd xhci-hcd.7.auto: irq 227, io mem 0xfe800000
[ 1.672758] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.672765] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.672771] usb usb3: Product: xHCI Host Controller
[ 1.672777] usb usb3: Manufacturer: Linux 4.4.154 xhci-hcd
[ 1.672783] usb usb3: SerialNumber: xhci-hcd.7.auto
[ 1.673446] hub 3-0:1.0: USB hub found
[ 1.673482] hub 3-0:1.0: 1 port detected
[ 1.673910] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 1.674118] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
[ 1.674205] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.674330] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.674337] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.674343] usb usb4: Product: xHCI Host Controller
[ 1.674348] usb usb4: Manufacturer: Linux 4.4.154 xhci-hcd
[ 1.674354] usb usb4: SerialNumber: xhci-hcd.7.auto
[ 1.674969] hub 4-0:1.0: USB hub found
[ 1.675000] hub 4-0:1.0: 1 port detected
[ 1.676843] xhci-hcd xhci-hcd.7.auto: remove, state 1
[ 1.676868] usb usb4: USB disconnect, device number 1
[ 1.681760] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 1.685039] mmcblk1rpmb: mmc1:0001 DJNB4R partition 3 4.00 MiB
[ 1.700899] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds.
[ 1.701548] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset.
[ 1.702256] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered
[ 1.703181] xhci-hcd xhci-hcd.7.auto: remove, state 1
[ 1.703652] usb usb3: USB disconnect, device number 1
[ 1.704778] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered
[ 1.710060] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 1.710781] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[ 1.711617] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.712466] xhci-hcd xhci-hcd.8.auto: irq 228, io mem 0xfe900000
[ 1.713182] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.713806] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.714444] usb usb3: Product: xHCI Host Controller
[ 1.714897] usb usb3: Manufacturer: Linux 4.4.154 xhci-hcd
[ 1.715382] usb usb3: SerialNumber: xhci-hcd.8.auto
[ 1.716425] hub 3-0:1.0: USB hub found
[ 1.716822] hub 3-0:1.0: 1 port detected
[ 1.717527] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 1.718211] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[ 1.718977] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.719831] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.720436] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.721131] usb usb4: Product: xHCI Host Controller
[ 1.721570] usb usb4: Manufacturer: Linux 4.4.154 xhci-hcd
[ 1.722072] usb usb4: SerialNumber: xhci-hcd.8.auto
[ 1.723076] hub 4-0:1.0: USB hub found
[ 1.723440] hub 4-0:1.0: 1 port detected
[ 1.728532] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.729611] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[ 1.730526] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[ 1.789826] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.790665] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.791292] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.791947] usb usb5: Product: EHCI Host Controller
[ 1.792391] usb usb5: Manufacturer: Linux 4.4.154 ehci_hcd
[ 1.792903] usb usb5: SerialNumber: fe380000.usb
[ 1.794268] hub 5-0:1.0: USB hub found
[ 1.794642] hub 5-0:1.0: 1 port detected
[ 1.796204] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 1.796973] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[ 1.797580] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.798257] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 1.799327] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[ 1.800211] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[ 1.800358] hub 1-1:1.0: USB hub found
[ 1.800812] hub 1-1:1.0: 7 ports detected
[ 1.856230] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.856863] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.857504] usb usb6: Product: Generic Platform OHCI controller
[ 1.858044] usb usb6: Manufacturer: Linux 4.4.154 ohci_hcd
[ 1.858535] usb usb6: SerialNumber: fe3a0000.usb
[ 1.860313] hub 6-0:1.0: USB hub found
[ 1.860698] hub 6-0:1.0: 1 port detected
[ 1.862886] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.863564] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.864196] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.864768] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 1.865752] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 1.866303] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 1.867341] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 1.880086] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.892248] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[ 1.908793] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[ 1.916395] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.922850] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
[ 1.923492] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
[ 1.924159] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
[ 1.924949] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
[ 1.926020] asoc-simple-card: probe of spdif-sound failed with error -22
[ 1.927835]
[ 1.927933] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.9 (r)
[ 1.927942] ======== dhd_wlan_init_plat_data ========
[ 1.927948] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 1.927960] dhd_wlan_init_gpio: WL_REG_ON=-1, WL_HOST_WAKE=-1
[ 1.927967] dhd_wlan_init_gpio: oob_irq=68, oob_irq_flags=0x414
[ 1.927971] dhd_wifi_platform_load: Enter
[ 1.928000] Power-up adapter 'DHD generic adapter'
[ 1.928078] wifi_platform_set_power = 1
[ 1.928083] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 1.928089] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 1.928095] [WLAN_RFKILL]: wifi turn on power. -1
[ 1.933126] =======================================================
[ 1.933684] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 1.934260] =======================================================
[ 1.934840] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver v5.2.2.3_24783.20171030) init.
[ 1.935634] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 1.936088] [WLAN_RFKILL]: wifi turn on power. -1
[ 1.936517] RTW: module init start
[ 1.936851] RTW: rtl8188eu v5.2.2.3_24783.20171030
[ 1.937282] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 1.938083] usbcore: registered new interface driver rtl8188eu
[ 1.938608] RTW: module init ret=0
[ 1.938788] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.940507] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.941125] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.942783] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.944439] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:06 UTC (1358499006)
[ 1.946364] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.976314] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko
is '', rk_ko_ver is '5', built at '14:14:58', on 'Nov 21 2018'.
[ 1.978641] Mali: Mali device driver loaded
[ 1.979750] ALSA device list:
[ 1.980021] #0: rockchip,rt5640-codec
[ 1.980359] #1: HDMI-CODEC
[ 1.980922] Waiting for root device PARTUUID=614e0000-0000...
[ 2.004181] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.017622] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 313
[ 2.021928] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 2.022461] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[ 2.097900] usb 1-1.1: new low-speed USB device number 3 using ehci-platform
[ 2.181541] vendor storage:20160801 ret = 0
[ 2.189112] usb 1-1.1: New USB device found, idVendor=0e8f, idProduct=00fb
[ 2.189778] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.190436] usb 1-1.1: Product: USB Mouse
[ 2.190839] usb 1-1.1: Manufacturer: YSTEK
[ 2.197173] input: YSTEK USB Mouse as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:0E8F:00FB.0001/input/input1
[ 2.229010] wifi_platform_bus_enumerate device present 1
[ 2.229491] ======== Card detection to detect SDIO card! ========
[ 2.230105] mmc2:mmc host rescan start!
[ 2.246706] bcmsdh_register: register client driver
[ 2.247766] bcmsdh_sdmmc_probe: Enter num=1
[ 2.248691] bcmsdh_sdmmc_probe: Enter num=2
[ 2.249116] bus num (host idx)=2, slot num (rca)=1
[ 2.249549] found adapter info 'DHD generic adapter'
[ 2.250734] hid-generic 0003:0E8F:00FB.0001: input,hidraw0: USB HID v1.10 Mouse [YSTEK USB Mouse] on usb-fe3c0000.usb-1.1/input0
[ 2.250828] sdioh_attach: set sd_f2_blocksize 256
[ 2.252492] sdioh_attach: sd clock rate = 0
[ 2.255839] dhdsdio_probe : no mutex held. set lock
[ 2.257234] F1 signature read @0x18000000=0x17224356
[ 2.275544] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[ 2.278262] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[ 2.279175] dhd_conf_set_chiprev: chip=0x4354, chiprev=2
[ 2.280028] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
[ 2.282099] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
[ 2.283013] wl_escan_attach: Enter
[ 2.283363] wl_escan_init: Enter
[ 2.284156] wl_create_event_handler(): thread:wl_escan_handler:a0 started
[ 2.284834] dhd_init_logstrs_array: Failed to open the file /installmedia/logstrs.bin
[ 2.285796] tsk Enter, tsk = 0xffffffc0f13701b0
[ 2.286305] dhd_attach(): thread:dhd_watchdog_thread:a1 started
[ 2.287288] dhd_attach(): thread:dhd_dpc:a2 started
[ 2.288307] dhd_attach(): thread:dhd_rxf:a3 started
[ 2.288795] dhd_deferred_work_init: work queue initialized
[ 2.289325] dhd_bus_set_default_min_res_mask: Unhandled chip id
[ 2.290873] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[ 2.306976] Dongle Host Driver, version 1.579.77.41.9 (r)
[ 2.308767] wl_ext_iapsta_attach_netdev: bssidx=0
[ 2.309229] Register interface [wlan0] MAC: cc:4b:73:1d:df:86
[ 2.309229]
[ 2.310162] dhd_wl_ioctl: returning as busstate=0
[ 2.310598] dhd_dbg_detach_pkt_monitor, 2204
[ 2.311019] dhd_bus_devreset: == Power OFF ==
[ 2.311760] bcmsdh_oob_intr_unregister: Enter
[ 2.312158] bcmsdh_oob_intr_unregister: irq is not registered
[ 2.312677] dhd_txglom_enable: enable 0
[ 2.313051] dhd_conf_set_txglom_params: txglom_mode=copy
[ 2.313528] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
[ 2.314145] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
[ 2.314864] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
[ 2.315481] dhd_bus_devreset: WLAN OFF DONE
[ 2.315958] wifi_platform_set_power = 0
[ 2.316323] ======== PULL WL_REG_ON(-1) LOW! ========
[ 2.316837] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 2.318593] [WLAN_RFKILL]: wifi shut off power.
[ 2.319048] dhdsdio_probe : the lock is released.
[ 2.319765] dhd_module_init: Exit err=0
[ 20.868040] random: nonblocking pool is initialized
=====================分界线=======================
希望各位大神给点建议，是哪里出了问题啊，非常感谢！
|
|
