|
发表于 2016-4-18 15:17:55
只看该作者
地板
我现在用回默认的配置文件重新编译内核并烧写,但是现在却挂载不了根文件系统了,重新先烧官方固件在烧linux-boot.img也不行
情况跟这个帖子类似,但对我貌似并不适用http://developer.t-firefly.com/thread-1057-1-2.html
请问该怎么该呢?
log如下
[mw_shl_code=bash,false]DDR Version 2.04 20150121
In
1A1A2A2B 0
1A1A2828 3
LPDDR2
27282828 F
Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB
mach:14
OUT
Boot1 Release Time: 2015-05-25, version: 2.25
ChipType = a 1374
No.1 FLASH ID:ad de 14 a7 42 4a
ECC:60
*V玨%攻氧0 20
StorageInit ok = 727292
theL縃℉ㄕ浇褋2014.10-RK3128-10 (Dec 28 2015 - 14:53:17)
CPU: rk3128
CPU's clock information:
arm pll = 300000000HZ
periph pll = 594000000HZ
ddr pll = 600000000HZ
codec pll = 400000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks:1
Adding bank:0000000060000000(0000000040000000)
128 MiB
rk dma.譑厺晛init OK!
Using default environment
GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk312x!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
failed to prepare fdt from boot!
power key: bank-3 pin-23
can't find dts node for ricoh619
can't find dts node for act8846
can't find dts node for rk808
cpu_det GPIO pull up
pmic:rk818
Can't find dts node for fuel guage cw201x
can't find dts node for ADC
Enter power_led_init
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2015-06-12#2.25
empty serial no.
checkKey
vbus = 1
use dc chg rk818_charger_setting iset1:0x79 chgiset:0x75 current 1
read logo_on switch from dts [1]
can't find power_ctr node for lcdc0
failed to find part:logo
Hit any key to stop autoboot: 1 0
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x62000000 (0x006a5908)
ramdisk @ 0x65bf0000 (0x0027505c)
bootrk: do_bootm_linux...
Loading Device Tree to 65600000, end 65616640 ... OK
Add bank:0000000060000000, 0000000040000000
Starting kernel ...
<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0 (root@h2c-H435) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #4 SMP PREEMPT Mon Apr 18 13:31:04 CST 2016
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Rockchip RK3128, model: rockchip,rk3128
[ 0.000000] rockchip_uboot_logo_setup: mem: 2000000@9dc00000, offset:0
[ 0.000000] rockchip_uboot_mem_reserve: reserve 2000000@9dc00000 for uboot logo
[ 0.000000] rockchip_ion_reserve
[ 0.000000] ion heap(cma): base(0) size(800000) align(0)
[ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[ 0.000000] cma: CMA: reserved 8 MiB at 9d400000
[ 0.000000] ion_reserve: cma reserved base 9d400000 size 8388608
[ 0.000000] cma: CMA: reserved 16 MiB at 7f000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c166f000 s14016 r8192 d14656 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261120
[ 0.000000] Kernel command line: vmalloc=496M rockchip_jtag console=ttyFIQ0,115200 earlyprintk root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00010000@0x0000E000(boot),0x00020000@0x0001E000(backup),-@0x0003E000(linuxroot) storagemedia=nand uboot_logo=0x02000000@0x9dc00000 loader.timestamp=2015-12-28_14:53:17
[ 0.000000] rockchip jtag enabled
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 963024k/963024k available, 85552k reserved, 483328K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0ba8994 (11907 kB)
[ 0.000000] .init : 0xc0ba9000 - 0xc0c036c0 ( 362 kB)
[ 0.000000] .data : 0xc0c04000 - 0xc0d24bf8 (1155 kB)
[ 0.000000] .bss : 0xc0d24bf8 - 0xc0e464fc (1159 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
[ 0.000000] rkclk_init_clks: cnt_parent = 25
[ 0.000000] rkclk_init_clks: cnt_rate = 17
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ 0.000000] process version: 0
[ 0.000000] channel:0, lkg:24
[ 0.000000] target-temp:85
[ 0.000000] FirePrime hardware version: V00
[ 0.000000] channel:0, lkg:24
[ 0.000000] target-temp:85
[ 0.000000] channel:0, lkg:24
[ 0.000000] target-temp:85
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.544997] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.545023] pid_max: default: 32768 minimum: 301
[ 0.545219] Security Framework initialized
[ 0.545249] SELinux: Initializing.
[ 0.545383] Mount-cache hash table entries: 512
[ 0.546616] Initializing cgroup subsys debug
[ 0.546645] Initializing cgroup subsys memory
[ 0.546696] Initializing cgroup subsys freezer
[ 0.546759] CPU: Testing write buffer coherency: ok
[ 0.547309] /cpus/cpu@0 missing clock-frequency property
[ 0.547338] /cpus/cpu@1 missing clock-frequency property
[ 0.547357] /cpus/cpu@2 missing clock-frequency property
[ 0.547375] /cpus/cpu@3 missing clock-frequency property
[ 0.547452] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.547527] Setting up static identity map for 0xc0854628 - 0xc0854680
[ 0.549491] last_log: 0x7e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x165d (version 3.0)
[ 0.622804] CPU1: Booted secondary processor
[ 0.622861] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.642490] CPU2: Booted secondary processor
[ 0.642535] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.662247] CPU3: Booted secondary processor
[ 0.662291] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.662477] Brought up 4 CPUs
[ 0.662530] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.662545] CPU: All CPU(s) started in SVC mode.
[ 0.663965] devtmpfs: initialized
[ 0.673614] pinctrl core: initialized pinctrl subsystem
[ 0.674129] regulator-dummy: no parameters
[ 0.675658] NET: Registered protocol family 16
[ 0.678830] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.679518] ion_snapshot: 0x7e9c8000 map to 0xe0907000 and copy to 0xc0e21a84 (version 0.1)
[ 0.679756] Registered FIQ tty driver
[ 0.682149] console [ttyFIQ0] enabled
[ 0.682568] Registered fiq debugger ttyFIQ0
[ 0.684053] rockchip_get_bank_data:name=/pinctrl@20008000/gpio0@2007c000 start=0x2007c000,end=0x2007c0ff
[ 0.684193] rockchip_get_bank_data:name=/pinctrl@20008000/gpio1@20080000 start=0x20080000,end=0x200800ff
[ 0.684276] rockchip_get_bank_data:name=/pinctrl@20008000/gpio2@20084000 start=0x20084000,end=0x200840ff
[ 0.684353] rockchip_get_bank_data:name=/pinctrl@20008000/gpio3@20088000 start=0x20088000,end=0x200880ff
[ 0.684441] rockchip_get_bank_data:name=/pinctrl@20008000/gpio15@2008A000 start=0x20086000,end=0x200860ff
[ 0.684513] rockchip_pinctrl_probe:name=rk312x-GPIO,type=5
[ 0.684542] rockchip_pinctrl_probe:name=base start=0x20008000,end=0x200080a7
[ 0.684571] rockchip_pinctrl_probe:name=mux start=0x200080a8,end=0x200080f3
[ 0.684599] rockchip_pinctrl_probe:name=pull start=0x20008118,end=0x20008137
[ 0.684627] rockchip_pinctrl_probe:name=drv start=0x20008100,end=0x20008103
[ 0.687369] rockchip_pinctrl_probe:init ok
[ 0.695251] rk_iommu 1010e300.vop_mmu: (vop) Enter
[ 0.695310] rk_iommu 1010e300.vop_mmu: skip request vop mmu irq
[ 0.695405] rk_iommu 1010e300.vop_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.695434] rk_iommu 1010e300.vop_mmu: (vop) Initialized
[ 0.695720] rk_iommu 10104440.hevc_mmu: (hevc) Enter
[ 0.695868] rk_iommu 10104440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.695900] rk_iommu 10104440.hevc_mmu: (hevc) Initialized
[ 0.696167] rk_iommu 10106800.vpu_mmu: (vpu) Enter
[ 0.696295] rk_iommu 10106800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.696327] rk_iommu 10106800.vpu_mmu: (vpu) Initialized
[ 0.696598] rk_iommu 10108800.iep_mmu: (iep) Enter
[ 0.696725] rk_iommu 10108800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.696756] rk_iommu 10108800.iep_mmu: (iep) Initialized
[ 0.698356] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.698386] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.698676] DDR DEBUG: version 1.02 20140828
[ 0.698700] DDR DEBUG: DRAM Type:LPDDR2
[ 0.698726] DDR DEBUG: 2 CS, ROW=14, Bank=8, COL=10, Total Capability=1024MB
[ 0.698773] DDR DEBUG: init success!!! freq=300MHz
[ 0.753439] bio: create slab <bio-0> at 0
[ 0.754513] Rockchip hdmi driver version 2.0
.
[ 0.756353] SCSI subsystem initialized
[ 0.756719] usbcore: registered new interface driver usbfs
[ 0.756827] usbcore: registered new interface driver hub
[ 0.757047] usbcore: registered new device driver usb
[ 0.759251] rockchip_i2c 20072000.i2c: i2c-0: Rockchip I2C adapter
[ 0.761577] media: Linux media interface: v0.10
[ 0.761669] Linux video capture interface: v2.00
[ 0.761879] pps_core: LinuxPPS API ver. 1 registered
[ 0.761904] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.761953] PTP clock support registered
[ 0.762048] i2c-core: driver [bq24296] using legacy suspend method
[ 0.762072] i2c-core: driver [bq24296] using legacy resume method
[ 0.763475] Rockchip ion module is successfully loaded (v1.1)
[ 0.763752] Advanced Linux Sound Architecture Driver Initialized.
[ 0.764518] Bluetooth: Core ver 2.16
[ 0.764596] NET: Registered protocol family 31
[ 0.764618] Bluetooth: HCI device and connection manager initialized
[ 0.764652] Bluetooth: HCI socket layer initialized
[ 0.764682] Bluetooth: L2CAP socket layer initialized
[ 0.764735] Bluetooth: SCO socket layer initialized
[ 0.765187] cfg80211: Calling CRDA to update world regulatory domain
[ 0.766851] act8931_i2c_probe,line=715
[ 0.767659] The device is not act8931
[ 0.768314] rk818_i2c_probe,line=1282
[ 0.768617] rk818_pre_init,line=1197
[ 0.776125] ------------[ cut here ]------------
[ 0.776162] WARNING: at drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x4c/0xb4()
[ 0.776184] autorequest GPIO-25
[ 0.776201] Modules linked in:
[ 0.776230] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0 #4
[ 0.776281] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
LLLS御] (show_stack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
[ 0.776364] [<c0036278>] (warn_slowpath_common+0x4c/0x68) from [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c)
[ 0.776404] [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4)
[ 0.776445] [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4) from [<c029a674>] (gpiod_direction_output+0x80/0x2b0)
[ 0.776489] [<c029a674>] (gpiod_direction_output+0x80/0x2b0) from [<c032d4b4>] (rk818_parse_dt+0x170/0x20c)
[ 0.776534] [<c032d4b4>] (rk818_parse_dt+0x170/0x20c) from [<c032e81c>] (rk818_i2c_probe+0xf8/0x344)
[ 0.776576] [<c032e81c>] (rk818_i2c_probe+0xf8/0x344) from [<c0522798>] (i2c_device_probe+0xa8/0xd4)
[ 0.776617] [<c0522798>] (i2c_device_probe+0xa8/0xd4) from [<c030b54c>] (really_probe+0xa8/0x20c)
[ 0.776656] [<c030b54c>] (really_probe+0xa8/0x20c) from [<c030b7a8>] (driver_probe_device+0x30/0x48)
[ 0.776695] [<c030b7a8>] (driver_probe_device+0x30/0x48) from [<c030b820>] (__driver_attach+0x60/0x84)
[ 0.776733] [<c030b820>] (__driver_attach+0x60/0x84) from [<c0309ffc>] (bus_for_each_dev+0x50/0x90)
[ 0.776771] [<c0309ffc>] (bus_for_each_dev+0x50/0x90) from [<c030adac>] (bus_add_driver+0xac/0x20c)
[ 0.776809] [<c030adac>] (bus_add_driver+0xac/0x20c) from [<c030bcfc>] (driver_register+0x9c/0x138)
[ 0.776848] [<c030bcfc>] (driver_register+0x9c/0x138) from [<c05242ac>] (i2c_register_driver+0x40/0xac)
[ 0.776892] [<c05242ac>] (i2c_register_driver+0x40/0xac) from [<c0bd1dec>] (rk818_module_init+0x10/0x34)
[ 0.776934] [<c0bd1dec>] (rk818_module_init+0x10/0x34) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
[ 0.776973] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0ba9b28g, pdo_iniwaitls+0x70/0xa0)
[ 0.777014] [<c0ba9b28>] (do_initcalls+0x70/0xa0) from [<c0ba9be8>] (kernel_init_freeable+0x90/0x130)
[ 0.777055] [<c0ba9be8>] (kernel_init_freeable+0x90/0x130) from [<c08329b4>] (kernel_init+0x8/0xe4)
[ 0.777098] [<c08329b4>]inkernel_an't 0x8/0xelib/mom [<c000d0xxna (ret_fo.3.1o.rk: No /0x3c)
le or 0.7771ory
--[ end trace c1e1dc5239e0d0ed ]---
[ 0.777197] cpu_det_gpio up
[ 0.777249] ------------[ cut here ]------------
[ 0.777277] WARNING: at drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x4c/0xb4()
[ 0.777298] autorequest GPIO-69
[ 0.777314] Modules linked in:
[ 0.777339]inPUL adiID 1 Cntim: dravpes/0 T inted: G W 3.10.0 #4
[ 0.777379] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ 0.777417] [<c001175c>] (show_stack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/AT68)
oul no7 7oad]/[ic/m3dul8s]3.wa.n_modwlat._common+0x4c/0x68) from [<dep: No such file or directory
c0036314>] (warn_slowpath_fmt+0x2c/0x3c)
[ 0.777497] [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4)
[ 0.777TA6: Coc02 n3eclo d pli_emourles/3.ested+0dul/0.b4p No succ 2il674>] (rpiorecirrc
ion_output+0x80/0x2b0)
[ 0.777579] [<c029a674>] (gpiod_direction_output+0x80/0F2bAL frou [ n0t2loa8 /lirkm18_ler/e_d0+0/1o4ule2.de
:[No such f6le] [<c03re5tory
rk818_parse_dt+0x1c4/0x20c) from [<c032e81c>] (rk818_i2c_probe+0xf8/0x344)
[ FAT776 C] ld cot2e81c>]a( k8i8/i2c_peobe+0xf8/0x344) from [<c0522798>] (i2c_device_probe+0sa3/10d0/
od l s..ep: N0 u<h0f2l798r directory
done.
] (i2c_device_probe+0xa8/0xd4) from [<c030b54c>] (really_probe+0xa8/0x20c)
[ 0.777739] [<c030b54c>] (really_probe+0xa8/0x20c) from [<c030b7a8>] (driver_probe_dBegin: Running /scripts/init-premount ... evice+0x30/0x48)
[ 0.777777] [<c030b7a8>] (driver_probe_device+0x30/0x48) from [<c030b820>] (__driver_attach+0x60/0x84)
[ 0.777815] [<c030b820>] (__driver_one.c
+0x60/0x84) from [<c0309ffc>] (bus_for_each_dev+0x50/0xegin:[Mount.77 r53] [<c0 09stcm] (.us_for_each_dev+0x50/0x90) from [<c030adac>] (bus_add_driver+0xac/0x20c)
[ B g0n: 7u9ni [</03rapas/] cblstodd_.. verdoxec/0x20c) from [<c030bcfc>] (driver_register+0x9c/0x138)
[ 0.777930] [<c030bcfc>] (driver_register+0x9c/0x138) from [<c05242ac>] (i2c_register_driver+0x40/0xac)
[ 0.777971] [<c05242ac>] (i2c_register_driver+0x40/0xac) from [<c0bd1dec>] (rk818_module_init+0x10/0x34)
[ 0.778012] [<c0bd1dec>] (rk818_module_init+0x10/0x34) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
[ 0.778051] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0ba9b28>] (do_initcalls+0x70/0xa0)
[ 0.778090] [<c0ba9b28>] (do_initcalls+0x70/0xa0) from [<c0ba9be8>] (kernel_init_freeable+0x90/0x130)
[ 0.778130] [<c0ba9be8>] (kernel_init_freeable+0x90/0x130) from [<c08329b4>] (kernel_init+0x8/0xe4)
[ 0.778170] [<c08329b4>] (kernel_init+0x8/0xe4) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[ 0.778195] ---[ end trace c1e1dc5239e0d0ee ]---
[ 0.778224] power_hold_gpio up
[ 0.778263] rk818_i2c_probe: rk818_pmic_sleep=0
[ 0.782215] vdd_arm: 712 <--> 1500 mV at 1100 mV
[ 0.786479] vdd_logic: 712 <--> 1500 mV at 1100 mV
[ 0.790276] rk818_dcdc3: 1200 mV
[ 0.794531] vccio: 1800 <--> 3300 mV at 3000 mV
[ 0.798366] rk818_ldo1: 3300 mV
[ 0.802217] rk818_ldo2: 3000 mV
[ 0.806027] rk818_ldo3: 1100 mV
[ 0.809804] rk818_ldo4: 2800 mV
[ 0.813593] rk818_ldo5: 3000 mV
[ 0.817357] rk818_ldo6: 1200 mV
[ 0.821172] rk818_ldo7: 1800 mV
[ 0.824965] rk818_ldo8: 1800 mV
[ 0.827825] vcc_sd: 1800 <--> 3000 mV at 3000 mV
[ 0.829292] rk818_ldo10: at 3000 mV
[ 0.831092] rk818_irq_init: rk818_pmic_irq=1
[ 0.831708] fireprime_rk818_hdmi_5v_en enable:1
[ 0.832562] i2c-core: driver [rk818] using legacy suspend method
[ 0.832589] i2c-core: driver [rk818] using legacy resume method
[ 0.834465] Switching to clocksource arch_sys_counter
[ 0.857041] rk_battery_charger_detect_cb , battery_charger_detect 1
[ 0.871575] fb disp policy is box
[ 0.871695] rk-fb rockchip-fb: rk fb ion client create success!
[ 0.871724] rk-fb rockchip-fb: rockchip framebuffer driver probe
[ 0.872217] rk-screen rk_screen.9: rockchip screen probe success
[ 0.872817] rk31xx-lvds 20038000.lvds: screen is not lvds/rgb!
[ 0.872865] rk31xx-lvds: probe of 20038000.lvds failed with error -22
[ 0.874031] rk312x-lcdc lcdc0: can't find power_ctr node for lcdc0
[ 0.874063] rk_fb_trsm_ops_get:un supported transmitter:6!
[ 0.874628] graphics fb0: rockchip framebuffer registerd:fb0
[ 0.875416] graphics fb1: rockchip framebuffer registerd:fb1
[ 0.875832] graphics fb2: rockchip framebuffer registerd:fb2
[ 0.876461] rk312x-lcdc lcdc0: set lcdc0 dclk failed
[ 0.876497] rk312x-lcdc lcdc0: lcdc0: dclk:74250000>>fps:60
[ 0.876523] rk312x-lcdc lcdc0: wakeup from standby!
[ 0.895238] alloc_buffer:ion_phy_addr=0x10000000
[ 0.900618] fb0:phy:10000000>>vir:e0930000>>len:0xb00000
[ 0.912619] rk312x-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[ 0.928979] NET: Registered protocol family 2
[ 0.929909] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.930047] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.930162] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.930282] TCP: reno registered
[ 0.930313] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.930361] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.930736] NET: Registered protocol family 1
[ 0.932857] rk818-battery rk818-battery: invalid fcc(0x0), use design capacity
[ 0.933724] rk818-battery rk818-battery: update fcc : 2100
[ 0.934015] rk818-battery rk818-battery: not battery, enter test power mode
[ 0.955486] rk818-battery rk818-battery: v=4200, ov=4200, rv=0, c=0, pwroff_min=0
[ 0.961597] rk818-battery rk818-battery: c=0, v=4200, relax=0, ocv=4200, est=4200, calib=-1
[ 0.962371] rk818-battery rk818-battery: reg soc=0, init soc = 0, init cap=0
[ 0.990652] rk818-battery rk818-battery: battery driver version 4.0.0
[ 0.991422] Unpacking initramfs...
[ 1.255298] Freeing initrd memory: 2516K (c5bf0000 - c5e65000)
[ 1.256578] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available
[ 1.257289] vcodec_service: probe device vpu_combo.10
[ 1.257329] vcodec_service: No reset resource define
[ 1.257349] vcodec_service: No reset resource define
[ 1.257367] vcodec_service: No reset resource define
[ 1.257489] vcodec vpu_combo.10: failed on clk_get clk_cabac
[ 1.257601] vcodec_service: vpu_combo.10: power on
[ 1.257809] vcodec_service: probe device 10106000.vpu_service
[ 1.257873] vcodec_service: checking hw id 4831
[ 1.259182] vcodec_service: probe device 10104000.hevc_service
[ 1.259251] vcodec_service: checking hw id 6867
[ 1.260239] vcodec_service: vpu_combo.10: power off...
[ 1.260312] vcodec_service: done
[ 1.260332] vcodec_service: init success
[ 1.260490] rknandbase v1.0 2014-03-31
[ 1.260744] rknand_probe clk rate = 148500000
[ 1.260928] rknand_driver:ret = 0
[ 1.262425] rk_dts_sensor_probe:Get s5k4ec rockchip,power failed!
[ 1.262468] s5k4ec_io==1
[ 1.262521] the gpiorst1 is 107
[ 1.262551] the gpiorst2 is 107
[ 1.262608] rk_dts_sensor_probe:Get ov2659 rockchip,power failed!
[ 1.262640] s5k4ec_io==2
[ 1.262678] rk_dts_sensor_probe:Get gc0329 rockchip,power failed!
[ 1.262709] s5k4ec_io==2
[ 1.262744] rk_dts_sensor_probe:Get gc2035 rockchip,powerdown failed!
[ 1.262774] s5k4ec_io==2
[ 1.262835] s5k4ec_io==2
[ 1.264417] audit: initializing netlink socket (disabled)
[ 1.264493] type=2000 audit(0.720:1): initialized
[ 1.265912] bounce pool size: 64 pages
[ 1.276398] fuse init (API version 7.22)
[ 1.277269] msgmni has been set to 973
[ 1.281081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.281118] io scheduler noop registered
[ 1.281138] io scheduler deadline registered
[ 1.281341] io scheduler cfq registered (default)
[ 1.286825] rga 1010c000.rga: rga ion client create success!
[ 1.287167] rga: Driver loaded succesfully
[ 1.287370] rga: Module initialized.
[ 1.395727] rk-hdmi 20034000.hdmi: rockchip_hdmiv1_set_pwr_mode change pwr_mode 0 --> 1
[ 1.395767] rk-hdmi 20034000.hdmi: rockchip_hdmiv1_set_pwr_mode change pwr_mode LOWER_PWR
[ 1.395970] rk-hdmi 20034000.hdmi: hdmi probe success.
[ 1.396990] IEP Power ON
[ 1.397072] iep ion client create success!
[ 1.397537] IEP Power OFF
[ 1.397573] IEP Driver loaded succesfully
[ 1.397721] Module initialized.
[ 1.398241] cvbs connect to lcdc0
[ 1.398307] rk312x-lcdc lcdc0: lcdc0: dclk:27000000>>fps:63
[ 1.398517] rk3036-tve 1010e200.tve: rockchip,rk312x-tve tv encoder probe ok
[ 1.401448] dma-pl330 20078000.pdma: Loaded driver for PL330 DMAC-2364208
[ 1.401488] dma-pl330 20078000.pdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-16 Num_Events-16
[ 1.402372] rk_serial.c v1.8 2014-03-04
[ 1.402749] 20060000.serial: ttyS0 at MMIO 0x20060000 (irq = 52) is a rk29_serial.0
[ 1.403196] serial 20060000.serial: membase e3452000
[ 1.409607] loop: module loaded
[ 1.409736] i2c-core: driver [mpu6050B1] using legacy suspend method
[ 1.409761] i2c-core: driver [mpu6050B1] using legacy resume method
[ 1.409787] mpu_init: Probe name mpu6050B1
[ 1.410117] ak8963_mod_init: Probe name ak8963_mod
[ 1.411401] SCSI Media Changer driver v0.25
[ 1.412042] tun: Universal TUN/TAP device driver, 1.6
[ 1.412069] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.412354] vmac_init.
[ 1.413471] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[ 1.413506] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[ 1.413530] stmmac_probe_config_dt: clock input or output? (input).
[ 1.413553] stmmac_probe_config_dt: TX delay(0x30).
[ 1.413575] stmmac_probe_config_dt: RX delay(0x10).
[ 1.413677] stmmac_probe_config_dt: is rockchip,rk312x-gmac
[ 1.413697] stmmc_pltfr_init:
[ 1.413716] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[ 1.413809] stmmc_pltfr_init: init for RGMII
[ 1.413833] tx delay=0x30
[ 1.413833] rx delay=0x10
[ 1.414065] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.414087] Normal descriptors
[ 1.414103] Ring mode enabled
[ 1.414121] DMA HW capability register supported
[ 1.414140] RX Checksum Offload Engine supported (type 2)
[ 1.414159] TX Checksum insertion supported
[ 1.414176] Wake-Up On Lan supported
[ 1.414262] Enable RX Mitigation via HW Watchdog Timer
[ 1.415272] PPP generic driver version 2.4.2
[ 1.415704] PPP BSD Compression module registered
[ 1.415731] PPP Deflate Compression module registered
[ 1.415766] PPP MPPE Compression module registered
[ 1.415788] NET: Registered protocol family 24
[ 1.415844] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.415869] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.415892] Rockchip WiFi SYS interface (V1.00) ...
[ 1.415971] esp_mem_init enter date Apr 18 2016 13:14:14
[ 1.415993] esp_mem_init VERSION [V2.5]
[ 1.416067] esp_mem_init complete
[ 1.416200] usbcore: registered new interface driver catc
[ 1.416289] usbcore: registered new interface driver kaweth
[ 1.416313] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 1.416401] usbcore: registered new interface driver pegasus
[ 1.416489] usbcore: registered new interface driver rtl8150
[ 1.416606] usbcore: registered new interface driver r8152
[ 1.416629] hso: drivers/net/usb/hso.c: Option Wireless
[ 1.416781] usbcore: registered new interface driver hso
[ 1.416889] usbcore: registered new interface driver asix
[ 1.416978] usbcore: registered new interface driver ax88179_178a
[ 1.417066] usbcore: registered new interface driver cdc_ether
[ 1.417154] usbcore: registered new interface driver cdc_eem
[ 1.417265] usbcore: registered new interface driver dm9601
[ 1.417350] usbcore: registered new interface driver dm9620
[ 1.417450] usbcore: registered new interface driver smsc75xx
[ 1.417550] usbcore: registered new interface driver smsc95xx
[ 1.417632] usbcore: registered new interface driver gl620a
[ 1.417711] usbcore: registered new interface driver net1080
[ 1.417801] usbcore: registered new interface driver plusb
[ 1.417883] usbcore: registered new interface driver rndis_host
[ 1.417963] usbcore: registered new interface driver cdc_subset
[ 1.418040] usbcore: registered new interface driver zaurus
[ 1.418123] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1.418252] usbcore: registered new interface driver int51x1
[ 1.418334] usbcore: registered new interface driver kalmia
[ 1.418424] usbcore: registered new interface driver ipheth
[ 1.418524] usbcore: registered new interface driver sierra_net
[ 1.418607] usbcore: registered new interface driver cx82310_eth
[ 1.418709] usbcore: registered new interface driver cdc_ncm
[ 1.418791] usbcore: registered new interface driver qmi_wwan
[ 1.418872] usbcore: registered new interface driver cdc_mbim
[ 1.418946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.420932] EHCI: ehci_rk_probe e3480000 e3480010
[ 1.420968] rockchip_ehci_host 101c0000.usb: EHCI Host Controller
[ 1.421ait] rr-rchi /dhv/_hosk/101cby00.ue/: nexrUSB rs reg2.tered, assigned bus number 1
[ 1.421677] rockchip_ehci_host 101c0000.usb: irq 43, io mem 0x101c0000
[ 1.434868] rockchip_ehci_host 101c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.435023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.435058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.435084] usb usb1: Product: EHCI Host Controller
[ 1.435108] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[ 1.435132] usb usb1: SerialNumber: 101c0000.usb
[ 1.436034] hub 1-0:1.0: USB hub found
[ 1.436083] hub 1-0:1.0: 1 port detected
[ 1.436464] EHCI: ehci_rk_probe ok
[ 1.436643] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.436870] ohci-rockchip 101e0000.usb: RK OHCI Host Controller
[ 1.436925] ohci-rockchip 101e0000.usb: new USB bus registered, assigned bus number 2
[ 1.437024] ohci-rockchip 101e0000.usb: irq 64, io mem 0x101e0000
[ 1.497928] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.497963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.497990] usb usb2: Product: RK OHCI Host Controller
[ 1.498014] usb usb2: Manufacturer: Linux 3.10.0 ohci_hcd
[ 1.498038] usb usb2: SerialNumber: 101e0000.usb
[ 1.498868] hub 2-0:1.0: USB hub found
[ 1.498926] hub 2-0:1.0: 1 port detected
[ 1.499554] usbcore: registered new interface driver cdc_acm
[ 1.499581] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.499712] usbcore: registered new interface driver usblp
[ 1.499808] usbcore: registered new interface driver cdc_wdm
[ 1.499959] usbcore: registered new interface driver usb-storage
[ 1.500043] usbcore: registered new interface driver ums-alauda
[ 1.500124] usbcore: registered new interface driver ums-cypress
[ 1.500205] usbcore: registered new interface driver ums-datafab
[ 1.500285] usbcore: registered new interface driver ums_eneub6250
[ 1.500364] usbcore: registered new interface driver ums-freecom
[ 1.500445] usbcore: registered new interface driver ums-isd200
[ 1.500535] usbcore: registered new interface driver ums-jumpshot
[ 1.500617] usbcore: registered new interface driver ums-karma
[ 1.500698] usbcore: registered new interface driver ums-onetouch
[ 1.500780] usbcore: registered new interface driver ums-sddr09
[ 1.500860] usbcore: registered new interface driver ums-sddr55
[ 1.500941] usbcore: registered new interface driver ums-usbat
[ 1.501187] usbcore: registered new interface driver usbserial
[ 1.501277] usbcore: registered new interface driver usbserial_generic
[ 1.501360] usbserial: USB Serial support registered for generic
[ 1.501457] usbcore: registered new interface driver ftdi_sio
[ 1.501526] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.501701] usbcore: registered new interface driver option
[ 1.501772] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.501994] usbcore: registered new interface driver trancevibrator
[ 1.502019] usb20_otg: version 3.10a 21-DEC-2012
[ 1.502656] e3500040
[ 1.502683] Core Release: 2.91a
[ 1.502704] Setting default values for core params
[ 1.502973] Using Buffer DMA mode
[ 1.502997] Periodic Transfer Interrupt Enhancement - disabled
[ 1.503018] Multiprocessor Interrupt Enhancement - disabled
[ 1.503039] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.503057] ^^^^^^^^^^^^^^^^^Device Mode
[ 1.503086] Dedicated Tx FIFOs mode
[ 1.503121] pcd_init otg_dev = c5a25b40
[ 1.503454] usb20_otg 10180000.usb: DWC OTG Controller
[ 1.503510] usb20_otg 10180000.usb: new USB bus registered, assigned bus number 3
[ 1.503572] usb20_otg 10180000.usb: irq 42, io mem 0x00000000
[ 1.503784] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.503818] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.503845] usb usb3: Product: DWC OTG Controller
[ 1.503870] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 1.503894] usb usb3: SerialNumber: 10180000.usb
[ 1.504778] hub 3-0:1.0: USB hub found
[ 1.504826] hub 3-0:1.0: 1 port detected
[ 1.505462] usb20_host: version 3.10a 21-DEC-2012
[ 1.506407] usbcore: registered new interface driver xpad
[ 1.506527] usbcore: registered new interface driver usb_acecad
[ 1.506626] usbcore: registered new interface driver aiptek
[ 1.506723] usbcore: registered new interface driver gtco
[ 1.506820] usbcore: registered new interface driver hanwang
[ 1.506928] usbcore: registered new interface driver kbtab
[ 1.507044] usbcore: registered new interface driver wacom
[ 1.507889] sensor_register_slave:mma8452,id=17
[ 1.507919] sensor_register_slave:gs_mc3230,id=23
[ 1.507938] gsensor_init
[ 1.507956] sensor_register_slave:mpu6880_acc,id=24
[ 1.507976] sensor_register_slave:cm3217,id=47
[ 1.507996] sensor_register_slave:cm3218,id=48
[ 1.508374] .. rk pwm remotectl v1.1 init
[ 1.508799] input: 20050030.pwm as /devices/20050030.pwm/input/input0
[ 1.515111] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[ 1.515200] i2c /dev entries driver
[ 1.515852] IR NEC protocol handler initialized
[ 1.515878] IR RC5(x) protocol handler initialized
[ 1.515897] IR RC6 protocol handler initialized
[ 1.515915] IR JVC protocol handler initialized
[ 1.515933] IR Sony protocol handler initialized
[ 1.515951] IR RC5 (streamzap) protocol handler initialized
[ 1.515970] IR SANYO protocol handler initialized
[ 1.515988] IR MCE Keyboard/mouse protocol handler initialized
[ 1.516516] usbcore: registered new interface driver uvcvideo
[ 1.516541] USB Video Class driver (1.1.1)
[ 1.516564] CamSys driver version: v0.27.1, CamSys head file version: v0.10.0
[ 1.516590] E:camsys_soc_init(87): camsys isn't support soc: 0x31260001!
[ 1.518766] i2c-core: driver [bq27320] using legacy suspend method
[ 1.518798] i2c-core: driver [bq27320] using legacy resume method
[ 1.519568] device-mapper: uevent: version 1.0.3
[ 1.520097] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 1.520757] Bluetooth: HCI UART driver ver 2.2
[ 1.520786] Bluetooth: HCI H4 protocol initialized
[ 1.520806] Bluetooth: HCILL protocol initialized
[ 1.520825] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.19
[ 1.520846] rtk_btusb: Register usb char device interface for BT driver
[ 1.521261] usbcore: registered new interface driver rtk_btusb
[ 1.526880] cpufreq version 1.0, suspend freq 1008 MHz
[ 1.527253] cpuidle: using governor ladder
[ 1.527278] cpuidle: using governor menu
[ 1.527350] Synopsys Designware Multimedia Card Interface Driver
[ 1.527373] MHSC version = Ver 2.00 2015-06-10
[ 1.527824] dw cru_regsbase addr 0x124.
[ 1.527851] dw cru_reset_offset val 3.
[ 1.527878] dwmmc_rockchip 1021c000.rksdmmc: Version ID is 270a
[ 1.527940] dwmmc_rockchip 1021c000.rksdmmc: failed to get hpclk_mmc
[ 1.528418] dwmmc_rockchip 1021c000.rksdmmc: Using external DMA controller.
[ 1.528830] dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc0]
[ 1.529087] 1358..dw_mci_set_ios: no card. [mmc0]
[ 1.543087] 1358..dw_mci_set_ios: no card. [mmc0]
[ 1.562842] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[ 1.562887] dwmmc_rockchip 1021c000.rksdmmc: DW MMC controller at irq 48, 32 bit host data width, 256 deep fifo
[ 1.562922] dwmmc_rockchip 1021c000.rksdmmc: 1 slots initialized
[ 1.563468] dw cru_regsbase addr 0x124.
[ 1.563495] dw cru_reset_offset val 1.
[ 1.563522] dwmmc_rockchip 10214000.rksdmmc: Version ID is 270a
[ 1.563584] dwmmc_rockchip 10214000.rksdmmc: failed to get hpclk_mmc
[ 1.564161] dwmmc_rockchip 10214000.rksdmmc: Using external DMA controller.
[ 1.564556] dw_mci_init_slot: fmin=400000, fmax=37500000 [mmc1]
[ 1.565234] 1358..dw_mci_set_ios: no card. [mmc1]
[ 1.582459] 1358..dw_mci_set_ios: no card. [mmc1]
[ 1.602125] 1358..dw_mci_set_ios: no card. [mmc1]
[ 1.602160] dwmmc_rockchip 10214000.rksdmmc: DW MMC controller at irq 46, 32 bit host data width, 256 deep fifo
[ 1.602176] dwc_otg_hcd_suspend, usb device mode
[ 1.602190] dwmmc_rockchip 10214000.rksdmmc: 1 slots initialized
[ 1.602507] dw cru_regsbase addr 0x124.
[ 1.602521] dw cru_reset_offset val 2.
[ 1.602536] dwmmc_rockchip 10218000.rksdmmc: Version ID is 270a
[ 1.602576] dwmmc_rockchip 10218000.rksdmmc: failed to get hpclk_mmc
[ 1.602857] dwmmc_rockchip 10218000.rksdmmc: Using external DMA controller.
[ 1.603143] dw_mci_init_slot: fmin=200000, fmax=37500000 [mmc2]
[ 1.603380] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.621796] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.641504] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.641545] dwmmc_rockchip 10218000.rksdmmc: DW MMC controller at irq 47, 32 bit host data width, 256 deep fifo
[ 1.641562] dwmmc_rockchip 10218000.rksdmmc: 1 slots initialized
[ 1.641844] leds-gpio leds.18: pins are not configured from the driver
[ 1.642247] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.644693] usbcore: registered new interface driver usbhid
[ 1.644710] usbhid: USB HID core driver
[ 1.645261] zram: Created 1 device(s) ...
[ 1.645835] ashmem: initialized
[ 1.646055] logger: created 256K log 'log_main'
[ 1.646233] logger: created 256K log 'log_events'
[ 1.646424] logger: created 256K log 'log_radio'
[ 1.646589] logger: created 256K log 'log_system'
[ 1.648210] input: rk29-keypad as /devices/2006c000.adc/key.21/input/input1
[ 1.649592] ------------[ cut here ]------------
[ 1.649615] WARNING: at drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x4c/0xb4()
[ 1.649627] autorequest GPIO-27
[ 1.649636] Modules linked in:
[ 1.649652] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.10.0 #4
[ 1.649682] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ 1.649704] [<c001175c>] (show_stack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
[ 1.649724] [<c0036278>] (warn_slowpath_common+0x4c/0x68) from [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c)
[ 1.649745] [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4)
[ 1.649766] [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4) from [<c029a44c>] (gpiod_direction_input+0x58/0x1f0)
[ 1.649787] [<c029a44c>] (gpiod_direction_input+0x58/0x1f0) from [<c06630ac>] (rk312x_platform_probe+0x46c/0x5a4)
[ 1.649810] [<c06630ac>] (rk312x_platform_probe+0x46c/0x5a4) from [<c030c784>] (platform_drv_probe+0x14/0x18)
[ 1.649833] [<c030c784>] (platform_drv_probe+0x14/0x18) from [<c030b54c>] (really_probe+0xa8/0x20c)
[ 1.649853] [<c030b54c>] (really_probe+0xa8/0x20c) from [<c030b7a8>] (driver_probe_device+0x30/0x48)
[ 1.649872] [<c030b7a8>] (driver_probe_device+0x30/0x48) from [<c030b820>] (__driver_attach+0x60/0x84)
[ 1.649892] [<c030b820>] (__driver_attach+0x60/0x84) from [<c0309ffc>] (bus_for_each_dev+0x50/0x90)
[ 1.649911] [<c0309ffc>] (bus_for_each_dev+0x50/0x90) from [<c030adac>] (bus_add_driver+0xac/0x20c)
[ 1.649930] [<c030adac>] (bus_add_driver+0xac/0x20c) from [<c030bcfc>] (driver_register+0x9c/0x138)
[ 1.649950] [<c030bcfc>] (driver_registor-root /d1v/block/mtd/by-name/linuxroot, retcall+0x34/0xc8)
[ 1.649972] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0ba9b28>] (do_initcalls+0x70/0xa0)
[ 1.649993] [<c0ba9b28>] (do_initcalls+0x70/0xa0) from [<c0ba9be8>] (kernel_init_freeable+0x90/0x130)
[ 1.650014] [<c0ba9be8>] (kernel_init_freeable+0x90/0x130) from [<c08329b4>] (kernel_init+0x8/0xe4)
[ 1.650036] [<c08329b4>] (kernel_init+0x8/0xe4) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[ 1.650049] ---[ end trace c1e1dc5239e0d0ef ]---
[ 1.650326] This platfrom have not i2s_mclk,no need to set i2s_mclk.
[ 1.650798] rockchip-spdif 10204000.spdif: spdif ready.
[ 1.652869] audio-rk312x audio-rk312x.14: rk312x-hifi <-> rockchip-i2s.1 mapping ok
[ 1.653630] audio-rk312x audio-rk312x.14: rk312x-voice <-> rockchip-i2s.1 mapping ok
[ 1.653685] audio-rk312x audio-rk312x.14: ASoC: no sink widget found for Mic Bias
[ 1.653702] audio-rk312x audio-rk312x.14: ASoC: Failed to add route Mic Jack -> direct -> Mic Bias
[ 1.653717] audio-rk312x audio-rk312x.14: ASoC: no source widget found for Mic Bias
[ 1.653731] audio-rk312x audio-rk312x.14: ASoC: Failed to add route Mic Bias -> direct -> MICP
[ 1.653745] audio-rk312x audio-rk312x.14: ASoC: no source widget found for Mic Bias
[ 1.653760] audio-rk312x audio-rk312x.14: ASoC: Failed to add route Mic Bias -> direct -> MICN
[ 1.653774] audio-rk312x audio-rk312x.14: ASoC: no sink widget found for Mic Bias
[ 1.653788] audio-rk312x audio-rk312x.14: ASoC: Failed to add route Headset Jack -> direct -> Mic Bias
[ 1.653802] audio-rk312x audio-rk312x.14: ASoC: no source widget found for HPOUTR
[ 1.653816] audio-rk312x audio-rk312x.14: ASoC: Failed to add route HPOUTR -> direct -> Ext Spk
[ 1.653830] audio-rk312x audio-rk312x.14: ASoC: no source widget found for HPOUTL
[ 1.653845] audio-rk312x audio-rk312x.14: ASoC: Failed to add route HPOUTL -> direct -> Ext Spk
[ 1.653859] audio-rk312x audio-rk312x.14: ASoC: no source widget found for HPOUTR
[ 1.653873] audio-rk312x audio-rk312x.14: ASoC: Failed to add route HPOUTR -> direct -> Headphone Jack
[ 1.653887] audio-rk312x audio-rk312x.14: ASoC: no source widget found for HPOUTL
[ 1.653901] audio-rk312x audio-rk312x.14: ASoC: Failed to add route HPOUTL -> direct -> Headphone Jack
[ 1.656008] rockchip-hdmi-spdif rockchip-hdmi-spdif.13: rk-hdmi-spdif-hifi <-> 10204000.spdif mapping ok
[ 1.656855] u32 classifier
[ 1.656872] Actions configured
[ 1.656888] Netfilter messages via NETLINK v0.30.
[ 1.656975] nf_conntrack version 0.5.0 (15470 buckets, 61880 max)
[ 1.657456] ctnetlink v0.93: registering with nfnetlink.
[ 1.657549] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.657563] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.658054] xt_time: kernel timezone is -0000
[ 1.658373] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.658585] arp_tables: (C) 2002 David S. Miller
[ 1.658650] TCP: cubic registered
[ 1.658662] Initializing XFRM netlink socket
[ 1.659062] NET: Registered protocol family 10
[ 1.659867] mip6: Mobile IPv6
[ 1.659911] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.660119] sit: IPv6 over IPv4 tunneling driver
[ 1.660670] NET: Registered protocol family 17
[ 1.660714] NET: Registered protocol family 15
[ 1.660808] Bridge firewalling registered
[ 1.660828] Ebtables v2.0 registered
[ 1.661210] Bluetooth: RFCOMM TTY layer initialized
[ 1.661269] Bluetooth: RFCOMM socket layer initialized
[ 1.661282] Bluetooth: RFCOMM ver 1.11
[ 1.661294] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.661305] Bluetooth: BNEP filters: protocol multicast
[ 1.661322] Bluetooth: BNEP socket layer initialized
[ 1.661335] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.661352] Bluetooth: HIDP socket layer initialized
[ 1.661402] l2tp_core: L2TP core driver, V2.0
[ 1.661422] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.661434] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.661644] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.661662] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[ 1.661675] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.661687] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[ 1.661700] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.661759] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 43, flags = 0.
[ 1.661793] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 2, flags = 0.
[ 1.661806] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.661842] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.661909] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.662130] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 17.
[ 1.662166] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 35.
[ 1.662190] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 42.
[ 1.662212] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 41.
[ 1.662277] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.662402] [BT_RFKILL]: ** disable irq
[ 1.662548] [BT_RFKILL]: ap6212 device registered.
[ 1.662895] rk_cam_cif(3083):rk312x-camera version: v0.1.14 Zoom by ipp
[ 1.663014] rk_cif 1010a000.cif: rk_camera_cif_iomux:could not get cif_pin_all pinstate
[ 1.663440] soc-camera-pdrv s5k4ec_back_3: Probing s5k4ec_back_3
[ 1.663890] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 1.663920] rk312x_init_suspend
[ 1.663930] rk312x_suspend_init
[ 1.664188] Registering SWP/SWPB emulation handler
[ 1.664206] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 2000000@9dc00000
[ 1.669563] ddrfreq: verion 1.2 20140526
[ 1.669588] ddrfreq: normal 492MHz video_1080p 240MHz video_4k 396MHz dualview 396MHz idle 0MHz suspend 198MHz reboot 492MHz
[ 1.669601] ddrfreq: auto-freq=0
[ 1.669611] ddrfreq: auto-freq-table[0] 240MHz
[ 1.669621] ddrfreq: auto-freq-table[1] 324MHz
[ 1.669630] ddrfreq: auto-freq-table[2] 396MHz
[ 1.669640] ddrfreq: auto-freq-table[3] 528MHz
[ 1.683150] rk818_ldo8: disabling
[ 1.685221] rk818_ldo4: disabling
[ 1.685899] regulator-dummy: disabling
[ 1.686064] =======================================================
[ 1.686082] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 1.686094] =======================================================
[ 1.686106] WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
[ 1.686203] dhd_module_init: in
[ 1.686220] ======== bcm_wlan_set_plat_data ========
[ 1.686233] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 1.686283] host_oob_irq: 169
[ 1.686295] host_oob_irq_flags=4
[ 1.686305] dhd_wifi_platform_load: Enter
[ 1.686337] Power-up adapter 'DHD generic adapter'
[ 1.686347] pcd_pullup, is_on 0
[ 1.686400] wifi_platform_set_power = 1
[ 1.686414] ======== PULL WL_REG_ON HIGH! ========
[ 1.686426] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 1.686431] file system registered
[ 1.686450] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 1.686462] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 1.687807] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 1.687826] android_usb gadget: Number of LUNs=2
[ 1.687841] lun0: LUN: removable file: (no medium)
[ 1.687855] lun1: LUN: removable file: (no medium)
[ 1.688174] android_usb gadget: android_usb ready
[ 1.688295] sensor_init: Probe name sensors
[ 1.688325] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[ 1.688918] rtc_hym8563 0-0051: setting system clock to 2016-04-18 07:12:57 UTC (1460963577)
[ 1.695935] usbcore: registered new interface driver snd-usb-audio
[ 1.695960] ALSA device list:
[ 1.695971] #0: RK_RK312X
[ 1.695982] #1: RK-HDMI-SPDIF
[ 1.696594] Freeing unused kernel memory: 360K (c0ba9000 - c0c03000)
[ 1.749741] usb 1-1: new high-speed USB device number 2 using rockchip_ehci_host
[ 1.763090] udevd[133]: starting version 175
[ 1.769420] Cam_Powerdowm
[ 1.769510] rk818_ldo8: operation not allowed
[ 1.789145] [WLAN_RFKILL]: wifi turn on power. 43
[ 1.875590] rk818_ldo4: operation not allowed
[ 1.899753] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.899798] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.899829] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 1.900884] hub 1-1:1.0: USB hub found
[ 1.902089] hub 1-1:1.0: 4 ports detected
[ 1.926907] ret: 0
[ 1.963591] min_w = 800,min_h = 600 ,max_real_w = 2592,max_real_h = 1944,max_w = 2592,max_h =1944
[ 1.967173] s5k4ec_back_3(rk_cam_sensor:169): write reg(0xfcfc, val:0xd000) failed, try to write again!
[ 1.969840] s5k4ec_back_3(rk_cam_sensor:169): write reg(0xfcfc, val:0xd000) failed, try to write again!
[ 1.971587] s5k4ec_back_3(rk_cam_sensor:169): write reg(0xfcfc, val:0xd000) failed, try to write again!
[ 1.971639] s5k4ec_back_3(rk_cam_sensor:387): write array failed!
[ 1.971661] s5k4ec_back_3(rk_cam_sensor:671): soft reset failed
[ 1.971661]
[ 1.991266] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2c, val:0x7000) failed, try to write again!
[ 1.993026] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2c, val:0x7000) failed, try to write again!
[ 1.995305] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2c, val:0x7000) failed, try to write again!
[ 1.995770] wifi_platform_bus_enumerate device present 1
[ 1.995800] ======== Card detection to detect SDIO card! ========
[ 1.995822] mmc2:mmc host rescan start!
[ 1.997021] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2e, val:0x1a4) failed, try to write again!
[ 1.998719] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2e, val:0x1a4) failed, try to write again!
[ 2.000367] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2e, val:0x1a4) failed, try to write again!
[ 2.002938] s5k4ec_back_3(rk_cam_sensor:335): read reg(0xf12 val:0x0) failed, try to read again!
[ 2.002987] s5k4ec_back_3(rk_cam_sensor:718): error: mismatched pid = 0xffff
[ 2.002987]
[ 2.074543] ret: 0
[ 2.182767] usb 1-1.1: new full-speed USB device number 3 using rockchip_ehci_host
[ 2.202361] Cam_Powerdowm
[ 2.212199] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
[ 2.212325] soc-camera-pdrv ov2659_front_4: Probing ov2659_front_4
[ 2.247281] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.248847] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.250413] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.253222] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.281060] ret: 0
[ 2.295168] usb 1-1.1: New USB device found, idVendor=24ae, idProduct=2010
[ 2.295190] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.295207] usb 1-1.1: Product: Rapoo 2.4G Wireless Device
[ 2.295221] usb 1-1.1: Manufacturer: RAPOO
[ 2.299012] input: RAPOO Rapoo 2.4G Wireless Device as /devices/101c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 2.299652] hid-generic 0003:24AE:2010.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-101wa000forb-1ot inputblo[ mtd.30-n85]/lnputroRAPOretapo4.2.4G Wireless Device as /devices/101c0000.usb/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
[ 2.304538] hid-generic 0003:24AE:2010.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-101c0000.usb-1.1/input1
[ 2.342102] mmc_host mmc2: Bus speed (slot 0) = 37500000Hz (slot req 37500000Hz, actual 37500000HZ div = 0)
[ 2.342139] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 2.342261] rk_sdmmc: BOOT Bus speed=37500000Hz,Bus width=4bits.[mmc2]
[ 2.344639] mmc2: new high speed SDIO card at address 0001
[ 2.361233] bcmsdh_register: register client driver
[ 2.361445] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2.361607] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2.361627] bus num (host idx)=2, slot num (rca)=1
[ 2.361641] found adapter info 'DHD generic adapter'
[ 2.362256] F1 signature read @0x18000000=0x1540a9a6
[ 2.365228] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
[ 2.366230] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
[ 2.366386] wifi_platform_get_mac_addr
[ 2.366401] ======== bcm_wlan_get_mac_address ========
[ 2.366414] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[ 2.366433] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[ 2.366445] [WLAN_RFKILL]: This mac address is not valid, ignored...
[ 2.366465] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
[ 2.366539] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txt
[ 2.367232] wl_create_event_handler(): thread:wl_event_handler:d5 started
[ 2.367494] tsk Enter, tsk = 0xdde6149c
[ 2.368258] dhd_attach(): thread:dhd_watchdog_thread:d6 started
[ 2.368414] dhd_attach(): thread:dhd_dpc:d7 started
[ 2.368536] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2.368643] dhd_attach(): thread:dhd_rxf:d8 started
[ 2.368667] dhd_deferred_work_init: work queue initialized
[ 2.368975] dhdsdio_probe_init: set use_rxchain 0 from config.txt
[ 2.371510] input: RAPOO Rapoo 2.4G Wireless Device as /devices/101c0000.usb/usb1/1-1/1-1.1/1-1.1:1.2/input/input4
[ 2.372113] hid-generic 0003:24AE:2010.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-101c0000.usb-1.1/input2
[ 2.381181] Dongle Host Driver, version 1.201.59.5 (r506368)
[ 2.381181] Compiled in drivers/net/wireless/bcmdhd on Apr 18 2016 at 13:14:25
[ 2.381948] Register interface [wlan0] MAC: 04:e6:76:52:b1:dc
[ 2.381948]
[ 2.381981] dhd_prot_ioctl : bus is down. we have nothing to do
[ 2.382067] bcmsdh_oob_intr_unregister: Enter
[ 2.382082] bcmsdh_oob_intr_unregister: irq is not registered
[ 2.382102] dhd_txglom_enable: enable 0
[ 2.382114] dhd_bus_devreset: WLAN OFF DONE
[ 2.382210] wifi_platform_set_power = 0
[ 2.382226] ======== PULL WL_REG_ON LOW! ========
[ 2.382239] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 2.428677] Cam_Powerdowm
[ 2.433523] min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200
[ 2.434893] ov2659_front_4(rk_cam_sensor:169): write reg(0x103, val:0x1) failed, try to write again!
[ 2.436170] ov2659_front_4(rk_cam_sensor:169): write reg(0x103, val:0x1) failed, try to write again!
[ 2.437430] ov2659_front_4(rk_cam_sensor:169): write reg(0x103, val:0x1) failed, try to write again!
[ 2.437459] ov2659_front_4(rk_cam_sensor:387): write array failed!
[ 2.437473] ov2659_front_4(rk_cam_sensor:671): soft reset failed
[ 2.437473]
[ 2.448571] usb 1-1.4: new high-speed USB device number 4 using rockchip_ehci_host
[ 2.449921] ov2659_front_4(rk_cam_sensor:335): read reg(0x300a val:0x0) failed, try to read again!
[ 2.449949] ov2659_front_4(rk_cam_sensor:699): read chip id failed
[ 2.487710] [WLAN_RFKILL]: wifi shut off power.
[ 2.487735] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[ 2.487748] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 2.487853] dhd_module_init: Exit err=0
[ 2.556591] Cam_Powerdowm
[ 2.557895] usb 1-1.4: New USB device found, idVendor=14cd, idProduct=1212
[ 2.557916] usb 1-1.4: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2.557932] usb 1-1.4: Product: Mass Storage Device
[ 2.557946] usb 1-1.4: Manufacturer: Generic
[ 2.557960] usb 1-1.4: SerialNumber: 121220130416
[ 2.558914] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 2.559159] scsi0 : usb-storage 1-1.4:1.0
[ 2.625501] ret: 0
[ 2.655008] soc-camera-pdrv gc0329_front_5: Probing gc0329_front_5
[ 2.723864] ret: 0
[ 2.871460] Cam_Powerdowm
[ 2.875683] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480
[ 2.892149] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[ 2.893121] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[ 2.894083] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[ 2.922003] gc0329_front_5(rk_cam_sensor:335): read reg(0x0 val:0x0) failed, try to read again!
[ 2.922035] gc0329(917): gc0329 read chip id high byte failed
[ 2.922035]
[ 2.922051] gc0329(924): error: gc0329 mismatched pid = 0x0
[ 2.922051]
[ 2.922069] gc0329_front_5(rk_cam_sensor:718): error: mismatched pid = 0x0
[ 2.922069]
[ 3.028903] Cam_Powerdowm
[ 3.097769] ret: 0
[ 3.127303] soc-camera-pdrv gc2035_back_6: Probing gc2035_back_6
[ 3.215837] ret: 0
[ 3.363458] Cam_Powerdowm
[ 3.363475] rk_cam_io(1128):SENSOR_PWRSEQ_PWRDN failed
[ 3.363547] soc-camera-pdrv gc2035_back_6: Cannot get I2C adapter #2. No driver?
[ 3.471673] Cam_Powerdowm
[ 3.471689] rk_cam_io(1128):SENSOR_PWRSEQ_PWRDN failed
[ 3.471701] rk_cam_io(1117):SENSOR_PWRSEQ_HWRST failed
[ 3.540579] ret: 0
[ 3.541593] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[ 3.542878] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.570160] soc-camera-pdrv gc0308_front_7: Probing gc0308_front_7
[ 3.658668] ret: 0
[ 3.737154] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 3.737869] sd 0:0:0:0: [sda] Write Protect is off
[ 3.738604] sd 0:0:0:0: [sda] No Caching mode page found
[ 3.738625] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.742542] sd 0:0:0:0: [sda] No Caching mode page found
[ 3.742569] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.743800] sda: sda1
[ 3.747386] sd 0:0:0:0: [sda] No Caching mode page found
[ 3.747415] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.747438] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.806253] Cam_Powerdowm
[ 3.806378] soc-camera-pdrv gc0308_front_7: Cannot get I2C adapter #2. No driver?
[ 3.914532] Cam_Powerdowm
[ 3.983390] ret: 0
[ 4.613126] rk312x_delay_workq
[ 4.731293] [off]
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 5...
[ 5.923446] rk818-battery rk818-battery: changed: dsoc=0, rsoc=0
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 6...
[ 6.920898] rk818-battery rk818-battery: changed: dsoc=0, rsoc=0
[ 6.922593] rk818-battery rk818-battery: set charge to digital termination mode
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 7...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 8...
[ 9.385671] [otg id chg] last id -1 current id 256
[ 9.385800] PortPower off
[ 9.485283] Using Buffer DMA mode
[ 9.485316] Periodic Transfer Interrupt Enhancement - disabled
[ 9.485336] Multiprocessor Interrupt Enhancement - disabled
[ 9.485352] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 9.485366] ^^^^^^^^^^^^^^^^^Device Mode
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 9...
[ 9.975948] ***************vbus detect*****************
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 10...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 11...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 12...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 13...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 14...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 15...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 16...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 17...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 18...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 19...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 20...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 21...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 22...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 23...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 24...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 25...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 26...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 27...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 28...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 29...
wait-for-root /dev/block/mtd/by-name/linuxroot, retry 30...
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/block/mtd/by-name/linuxroot does not exist. Dropping to a shell!
FATAL: Could not load /lib/modules/3.10.0/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/3.10.0/modules.dep: No such file or directory
/bin/sh: can't access tty; job control turned off
(initramfs) [/mw_shl_code] |
|