|
关于点亮lvds屏问题
发表于 2016-4-21 10:32:10
浏览:12243
|
回复:2
打印
只看该作者
[复制链接]
楼主
根据论坛里的帖子,尝试去点亮一块单通道lvds接口的屏幕主要参考这两个帖子
http://developer.t-firefly.com/thread-945-1-1.html
http://developer.t-firefly.com/f ... t=%C6%C1&page=1
其中一个帖子有补丁,我没有直接打上内核而是手动增添,我新建了一个LCD_XXX.dtsi文件,直接将lcd-b101ew05.dtsi文件的内容复制到我新建的文件,并根据我的屏幕datasheet修改了参数,最后修改rk3128-fireprime.dts将我的头文件包括进去,并去掉之前的#include "lcd-box.dtsi"。但目前屏幕依然没点亮,求教哪里还有疏忽的地方
附上启动log
[mw_shl_code=applescript,false]#Boot ver: 2015-06-12#2.25
empty serial no.
checkKey
vbus = 1
rockusb key pressed.
DDR Version 2.04 20150121
In
1A1A2A2B 0
1A1A2828 3
LPDDR2
27282828 F
Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB
mach:14
OUT
Boot1 Release Time: 2015-05-25, version: 2.25
ChipType = a 1374
No.1 FLASH ID:ad de 14 a7 42 4a
ECC:60
*Vซk%นฅั๕0 20
StorageInit ok = 675757
theLฟHจHจีฝฝั2014.10-RK3128-10 (Dec 28 2015 - 14:53:17)
CPU: rk3128
CPU's clock information:
arm pll = 300000000HZ
periph pll = 594000000HZ
ddr pll = 600000000HZ
codec pll = 400000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks:1
Adding bank:0000000060000000(0000000040000000)
128 MiB
rk dma.ืK…•init OK!
Using default environment
GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk312x!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
failed to prepare fdt from boot!
power key: bank-3 pin-23
can't find dts node for ricoh619
can't find dts node for act8846
can't find dts node for rk808
cpu_det GPIO pull up
pmic:rk818
Can't find dts node for fuel guage cw201x
can't find dts node for ADC
Enter power_led_init
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2015-06-12#2.25
empty serial no.
checkKey
vbus = 1
use dc chg rk818_charger_setting iset1:0x79 chgiset:0x75 current 1
read logo_on switch from dts [1]
can't find power_ctr node for lcdc0
failed to find part:logo
Hit any key to stop autoboot: 0
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x62000000 (0x0069f108)
ramdisk @ 0x65bf0000 (0x0029a22c)
bootrk: do_bootm_linux...
Loading Device Tree to 65600000, end 65616640 ... OK
Add bank:0000000060000000, 0000000040000000
Starting kernel ...
<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0 (root@h2c-H435) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #18 SMP PREEMPT Wed Apr 20 18:32:58 CST 2016
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Rockchip RK3128, model: rockchip,rk3128
[ 0.000000] rockchip_uboot_logo_setup: mem: 2000000@9dc00000, offset:0
[ 0.000000] rockchip_uboot_mem_reserve: reserve 2000000@9dc00000 for uboot logo
[ 0.000000] rockchip_ion_reserve
[ 0.000000] ion heap(cma): base(0) size(800000) align(0)
[ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[ 0.000000] cma: CMA: reserved 8 MiB at 9d400000
[ 0.000000] ion_reserve: cma reserved base 9d400000 size 8388608
[ 0.000000] cma: CMA: reserved 16 MiB at 7f000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1665000 s14016 r8192 d14656 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261120
[ 0.000000] Kernel command line: vmalloc=496M rockchip_jtag console=ttyFIQ0,115200 earlyprintk root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00010000@0x0000E000(boot),0x00020000@0x0001E000(backup),-@0x0003E000(linuxroot) storagemedia=nand uboot_logo=0x02000000@0x9dc00000 loader.timestamp=2015-12-28_14:53:17
[ 0.000000] rockchip jtag enabled
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 962916k/962916k available, 85660k reserved, 483328K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0b9e614 (11866 kB)
[ 0.000000] .init : 0xc0b9f000 - 0xc0bf96c0 ( 362 kB)
[ 0.000000] .data : 0xc0bfa000 - 0xc0d1bef8 (1160 kB)
[ 0.000000] .bss : 0xc0d1bef8 - 0xc0e3cf7c (1157 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
[ 0.000000] rkclk_init_clks: cnt_parent = 25
[ 0.000000] rkclk_init_clks: cnt_rate = 17
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ 0.000000] process version: 0
[ 0.000000] channel:0, lkg:24
[ 0.000000] target-temp:85
[ 0.000000] FirePrime hardware version: V00
[ 0.000000] channel:0, lkg:24
[ 0.000000] target-temp:85
[ 0.000000] channel:0, lkg:24
[ 0.000000] target-temp:85
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.546090] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.546116] pid_max: default: 32768 minimum: 301
[ 0.546315] Security Framework initialized
[ 0.546343] SELinux: Initializing.
[ 0.546478] Mount-cache hash table entries: 512
[ 0.547709] Initializing cgroup subsys debug
[ 0.547739] Initializing cgroup subsys memory
[ 0.547790] Initializing cgroup subsys freezer
[ 0.547851] CPU: Testing write buffer coherency: ok
[ 0.548399] /cpus/cpu@0 missing clock-frequency property
[ 0.548428] /cpus/cpu@1 missing clock-frequency property
[ 0.548447] /cpus/cpu@2 missing clock-frequency property
[ 0.548466] /cpus/cpu@3 missing clock-frequency property
[ 0.548541] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.548617] Setting up static identity map for 0xc0851998 - 0xc08519f0
[ 0.550556] last_log: 0x7e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x165e (version 3.0)
[ 0.623888] CPU1: Booted secondary processor
[ 0.623945] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.643587] CPU2: Booted secondary processor
[ 0.643632] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.663337] CPU3: Booted secondary processor
[ 0.663383] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.663569] Brought up 4 CPUs
[ 0.663622] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.663637] CPU: All CPU(s) started in SVC mode.
[ 0.665049] devtmpfs: initialized
[ 0.674627] pinctrl core: initialized pinctrl subsystem
[ 0.675139] regulator-dummy: no parameters
[ 0.676669] NET: Registered protocol family 16
[ 0.679808] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.680491] ion_snapshot: 0x7e998000 map to 0xe0907000 and copy to 0xc0e18504 (version 0.1)
[ 0.680743] Registered FIQ tty driver
[ 0.683131] console [ttyFIQ0] enabled
[ 0.683549] Registered fiq debugger ttyFIQ0
[ 0.685039] rockchip_get_bank_data:name=/pinctrl@20008000/gpio0@2007c000 start=0x2007c000,end=0x2007c0ff
[ 0.685180] rockchip_get_bank_data:name=/pinctrl@20008000/gpio1@20080000 start=0x20080000,end=0x200800ff
[ 0.685264] rockchip_get_bank_data:name=/pinctrl@20008000/gpio2@20084000 start=0x20084000,end=0x200840ff
[ 0.685342] rockchip_get_bank_data:name=/pinctrl@20008000/gpio3@20088000 start=0x20088000,end=0x200880ff
[ 0.685431] rockchip_get_bank_data:name=/pinctrl@20008000/gpio15@2008A000 start=0x20086000,end=0x200860ff
[ 0.685502] rockchip_pinctrl_probe:name=rk312x-GPIO,type=5
[ 0.685533] rockchip_pinctrl_probe:name=base start=0x20008000,end=0x200080a7
[ 0.685561] rockchip_pinctrl_probe:name=mux start=0x200080a8,end=0x200080f3
[ 0.685589] rockchip_pinctrl_probe:name=pull start=0x20008118,end=0x20008137
[ 0.685618] rockchip_pinctrl_probe:name=drv start=0x20008100,end=0x20008103
[ 0.688347] rockchip_pinctrl_probe:init ok
[ 0.696181] rk_iommu 1010e300.vop_mmu: (vop) Enter
[ 0.696239] rk_iommu 1010e300.vop_mmu: skip request vop mmu irq
[ 0.696332] rk_iommu 1010e300.vop_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.696362] rk_iommu 1010e300.vop_mmu: (vop) Initialized
[ 0.696648] rk_iommu 10104440.hevc_mmu: (hevc) Enter
[ 0.696794] rk_iommu 10104440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.696825] rk_iommu 10104440.hevc_mmu: (hevc) Initialized
[ 0.697090] rk_iommu 10106800.vpu_mmu: (vpu) Enter
[ 0.697217] rk_iommu 10106800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.697248] rk_iommu 10106800.vpu_mmu: (vpu) Initialized
[ 0.697515] rk_iommu 10108800.iep_mmu: (iep) Enter
[ 0.697641] rk_iommu 10108800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.697672] rk_iommu 10108800.iep_mmu: (iep) Initialized
[ 0.699285] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.699317] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.699608] DDR DEBUG: version 1.02 20140828
[ 0.699633] DDR DEBUG: DRAM Type:LPDDR2
[ 0.699659] DDR DEBUG: 2 CS, ROW=14, Bank=8, COL=10, Total Capability=1024MB
[ 0.699706] DDR DEBUG: init success!!! freq=300MHz
[ 0.754148] bio: create slab <bio-0> at 0
[ 0.755207] Rockchip hdmi driver version 2.0
.
[ 0.757097] SCSI subsystem initialized
[ 0.757457] usbcore: registered new interface driver usbfs
[ 0.757564] usbcore: registered new interface driver hub
[ 0.757774] usbcore: registered new device driver usb
[ 0.760027] rockchip_i2c 20072000.i2c: i2c-0: Rockchip I2C adapter
[ 0.762333] media: Linux media interface: v0.10
[ 0.762427] Linux video capture interface: v2.00
[ 0.762634] pps_core: LinuxPPS API ver. 1 registered
[ 0.762659] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.762707] PTP clock support registered
[ 0.762805] i2c-core: driver [bq24296] using legacy suspend method
[ 0.762829] i2c-core: driver [bq24296] using legacy resume method
[ 0.764254] Rockchip ion module is successfully loaded (v1.1)
[ 0.764537] Advanced Linux Sound Architecture Driver Initialized.
[ 0.765299] Bluetooth: Core ver 2.16
[ 0.765376] NET: Registered protocol family 31
[ 0.765399] Bluetooth: HCI device and connection manager initialized
[ 0.765432] Bluetooth: HCI socket layer initialized
[ 0.765462] Bluetooth: L2CAP socket layer initialized
[ 0.765514] Bluetooth: SCO socket layer initialized
[ 0.765970] cfg80211: Calling CRDA to update world regulatory domain
[ 0.767639] act8931_i2c_probe,line=715
[ 0.768443] The device is not act8931
[ 0.769104] rk818_i2c_probe,line=1282
[ 0.769407] rk818_pre_init,line=1197
[ 0.776962] ------------[ cut here ]------------
[ 0.777000] WARNING: at drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x4c/0xb4()
[ 0.777022] autorequest GPIO-25
[ 0.777038] Modules linked in:
[ 0.777068] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0 #18
[ 0.777119] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ 0.777160] [<c001175c>] (show_stack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
[ 0.777201] [<c0036278>] (warn_slowpath_common+0x4c/0x68) from [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c)
[ 0.777242] [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4)
[ 0.777284] [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4) from [<c029a674>] (gpiod_direction_output+0x80/0x2b0)
[ 0.777328] [<c029a674>] (gpiod_direction_output+0x80/0x2b0) from [<c032d4b4>] (rk818_parse_dt+0x170/0x20c)
[ 0.777372] [<c032d4b4>] (rk818_parse_dt+0x170/0x20c) from [<c032e81c>] (rk818_i2c_probe+0xf8/0x344)
[ 0.777416] [<c032e81c>] (rk818_i2c_probe+0xf8/0x344) from [<c051fc48>] (i2c_device_probe+0xa8/0xd4)
[ 0.777458] [<c051fc48>] (i2c_device_probe+0xa8/0xd4) from [<c030b54c>] (really_probe+0xa8/0x20c)
[ 0.777497] [<c030b54c>] (really_probe+0xa8/0x20c) from [<c030b7a8>] (driver_probe_device+0x30/0x48)
[ 0.777536] [<c030b7a8>] (driver_probe_device+0x30/0x48) from [<c030b820>] (__driver_attach+0x60/0x84)
[ 0.777574] [<c030b820>] (__driver_attach+0x60/0x84) from [<c0309ffc>] (bus_for_each_dev+0x50/0x90)
[ 0.777611] [<c0309ffc>] (bus_for_each_dev+0x50/0x90) from [<c030adac>] (bus_add_driver+0xac/0x20c)
[ 0.777650] [<c030adac>] (bus_add_driver+0xac/0x20c) from [<c030bcfc>] (driver_register+0x9c/0x138)
[ 0.777691] [<c030bcfc>] (driver_register+0x9c/0x138) from [<c052175c>] (i2c_register_driver+0x40/0xac)
[ 0.777735] [<c052175c>] (i2c_register_driver+0x40/0xac) from [<c0bc7dec>] (rk818_module_init+0x10/0x34)
[ 0.777774] [<c0bc7dec>] (rk818_module_init+0x10/0x34) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
[ 0.777816] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0b9fb28>] (do_initcalls+0x70/0xa0)
[ 0.777859] [<c0b9fb28>] (do_initcalls+0x70/0xa0) from [<c0b9fbe8>] (kernel_init_freeable+0x90/0x130)
[ 0.777900] [<c0b9fbe8>] (kernel_init_freeable+0x90/0x130) from [<c082fe64>] (kernel_init+0x8/0xe4)
[ 0.777940] [<c082fe64>] (kernel_init+0x8/0xe4) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[ 0.777998] ---[ end trace 8c88a9ab6626809e ]---
[ 0.778038] cpu_det_gpio up
[ 0.778093] ------------[ cut here ]------------
[ 0.778121] WARNING: at drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x4c/0xb4()
[ 0.778142] autorequest GPIO-69
[ 0.778158] Modules linked in:
[ 0.778184] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.0 #18
[ 0.778225] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ 0.778264] [<c001175c>] (show_stack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
[ 0.778303] [<c0036278>] (warn_slowpath_common+0x4c/0x68) from [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c)
[ 0.778343] [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4)
[ 0.778383] [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4) from [<c029a674>] (gpiod_direction_output+0x80/0x2b0)
[ 0.778425] [<c029a674>] (gpiod_direction_output+0x80/0x2b0) from [<c032d508>] (rk818_parse_dt+0x1c4/0x20c)
[ 0.778468] [<c032d508>] (rk818_parse_dt+0x1c4/0x20c) from [<c032e81c>] (rk818_i2c_probe+0xf8/0x344)
[ 0.778510] [<c032e81c>] (rk818_i2c_probe+0xf8/0x344) from [<c051fc48>] (i2c_device_probe+0xa8/0xd4)
[ 0.778550] [<c051fc48>] (i2c_device_probe+0xa8/0xd4) from [<c030b54c>] (really_probe+0xa8/0x20c)
[ 0.778588] [<c030b54c>] (really_probe+0xa8/0x20c) from [<c030b7a8>] (driver_probe_device+0x30/0x48)
[ 0.778626] [<c030b7a8>] (driver_probe_device+0x30/0x48) from [<c030b820>] (__driver_attach+0x60/0x84)
[ 0.778664] [<c030b820>] (__driver_attach+0x60/0x84) from [<c0309ffc>] (bus_for_each_dev+0x50/0x90)
[ 0.778701] [<c0309ffc>] (bus_for_each_dev+0x50/0x90) from [<c030adac>] (bus_add_driver+0xac/0x20c)
[ 0.778739] [<c030adac>] (bus_add_driver+&ฌ,ึ๙] (driver_register+0x9c/0x138)
[ 0.778780] [<c030bcfc>] (driver_register+0x9c/0x138) from [<c052175c>] (i2c_register_driver+0x40/0xac)
[ 0.778821] [<c052175c>] (i2c_register_driver+0x40/0xac) from [<c0bc7dec>] (rk818_module_init+0x10/0x34)
[ 0.778860] [<c0bc7dec>] (rk818_module_init+0x10/0x34) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
[ 0.778900] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0b9fb28>] (do_initcalls+0x70/0xa0)
[ 0.778942] [<c0b9fb28>] (do_initcalls+0x70/0xa0) from [<c0b9fbe8>] (kernel_init_freeable+0x90/0x130)
[ 0.778982] [<c0b9fbe8>] (kernel_init_freeable+0x90/0x130) from [<c082fe64>] (kernel_init+0x8/0xe4)
[ 0.779020] [<c082fe64>] (kernel_init+0x8/0xe4) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[ 0.779045] ---[ end trace 8c88a9ab6626809f ]---
[ 0.779074] power_hold_gpio up
[ 0.779115] rk818_i2c_probe: rk818_pmic_sleep=0
[ 0.783113] vdd_arm: 712 <--> 1500 mV at 1100 mV
[ 0.787421] vdd_logic: 712 <--> 1500 mV at 1100 mV
[ 0.791254] rk818_dcdc3: 1200 mV
[ 0.795537] vccio: 1800 <--> 3300 mV at 3000 mV
[ 0.799390] rk818_ldo1: 3300 mV
[ 0.803165] rk818_ldo2: 3000 mV
[ 0.806982] rk818_ldo3: 1100 mV
[ 0.810801] rk818_ldo4: 2800 mV
[ 0.814618] rk818_ldo5: 3000 mV
[ 0.818418] rk818_ldo6: 1200 mV
[ 0.822286] rk818_ldo7: 1800 mV
[ 0.826102] rk818_ldo8: 1800 mV
[ 0.828969] vcc_sd: 1800 <--> 3000 mV at 3000 mV
[ 0.830429] rk818_ldo10: at 3000 mV
[ 0.832257] rk818_irq_init: rk818_pmic_irq=1
[ 0.832877] fireprime_rk818_hdmi_5v_en enable:1
[ 0.833732] i2c-core: driver [rk818] using legacy suspend method
[ 0.833759] i2c-core: driver [rk818] using legacy resume methoing, 0.83wait. .witching to clocksource arch_sys_counter
[ 0.858234] rk_battery_charger_detect_cb , battery_charger_detect 1
[ 0.872468] fb disp policy is box
[ 0.872587] rk-fb rockchip-fb: rk fb ion client create success!
[ 0.872616] rk-fb rockchip-fb: rockchip framebuffer driver probe
[ 0.873126] rk-screen rk_screen.9: rockchip screen probe success
[ 0.873738] rk31xx-lvds 20038000.lvds: screen is not lvds/rgb!
[ 0.873787] rk31xx-lvds: probe of 20038000.lvds failed with error -22
[ 0.874906] rk312x-lcdc lcdc0: can't find power_ctr node for lcdc0
[ 0.874938] rk_fb_trsm_ops_get:un supported transmitter:6!
[ 0.875528] graphics fb0: rockchip framebuffer registerd:fb0
[ 0.876312] graphics fb1: rockchip framebuffer registerd:fb1
[ 0.876729] graphics fb2: rockchip framebuffer registerd:fb2
[ 0.877354] rk312x-lcdc lcdc0: set lcdc0 dclk failed
[ 0.877389] rk312x-lcdc lcdc0: lcdc0: dclk:74250000>>fps:60
[ 0.877415] rk312x-lcdc lcdc0: wakeup from standby!
[ 0.895325] alloc_buffer:ion_phy_addr=0x10000000
[ 0.900795] fb0:phy:10000000>>vir:e0930000>>len:0xb00000
[ 0.910278] rk312x-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[ 0.926676] NET: Registered protocol family 2
[ 0.927602] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.927739] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.927853] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.927976] TCP: reno registered
[ 0.928008] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.928057] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.928438] NET: Registered protocol family 1
[ 0.930566] rk818-battery rk818-battery: invalid fcc(0x0), use design capacity
[ 0.931425] rk818-battery rk818-battery: update fcc : 2100
[ 0.931716] rk818-battery rk818-battery: not battery, enter test power mode
[ 0.953194] rk818-battery rk818-battery: v=4200, ov=4200, rv=0, c=0, pwroff_min=0
[ 0.959306] rk818-battery rk818-battery: c=0, v=4200, relax=0, ocv=4200, est=4200, calib=-1
[ 0.960083] rk818-battery rk818-battery: reg soc=0, init soc = 0, init cap=0
[ 0.988474] rk818-battery rk818-battery: battery driver version 4.0.0
[ 0.989256] Unpacking initramfs...
[ 1.271303] Freeing initrd memory: 2664K (c5bf0000 - c5e8a000)
[ 1.272585] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available
[ 1.273289] vcodec_service: probe device vpu_combo.10
[ 1.273326] vcodec_service: No reset resource define
[ 1.273346] vcodec_service: No reset resource define
[ 1.273363] vcodec_service: No reset resource define
[ 1.273488] vcodec vpu_combo.10: failed on clk_get clk_cabac
[ 1.273602] vcodec_service: vpu_combo.10: power on
[ 1.273756] vcodec_service: probe device 10106000.vpu_service
[ 1.273816] vcodec_service: checking hw id 4831
[ 1.275141] vcodec_service: probe device 10104000.hevc_service
[ 1.275211] vcodec_service: checking hw id 6867
[ 1.276183] vcodec_service: vpu_combo.10: power off...
[ 1.276256] vcodec_service: done
[ 1.276275] vcodec_service: init success
[ in:27o4di] esanntise dri0ers 4..3-31
[ 1.276729] rknand_probe clk rate = 148500000
[ 1.276920] rknand_driver:ret = 0
[ 1.278442] rk_dts_sensor_probe:Get s5k4ec rockchip,power failed!
[ 1.278483] s5k4ec_io==1
[ 1.278578] the gpiorst1 is 107
[ 1.278616] the gpiorst2 is 107
[ 1.278676] rk_dts_sensor_probe:Get ov2659 rockchip,power failed!
[ 1.278709] s5k4ec_io==2
[A :.278ld7]otklotd /lensmodules/3.10.0/modules.dep: No such file or directory
or_probe:Get gc0329 rockchip,power failed!
[ 1.278779] s5k4ec_io==2
[ 1.278814] rk_dts_sensor_probe:Get gc2035 rockchip,powerdown failed!
[ 1.278844] s5k4Ac_L: Cou
[ o 1.278903] s5k4ec_io==2
[ 1.280496] audit: initializing netlink socket (di /llb/m)du[e /3112.0/mo]ulyp.d20:0 ausuchiti0.740: o): inectarized
[ 1.281965] bounce pool size: 64 pages
[ 1.292359] fuse init (API version 7.22)
du e /..96.83moduoek lep:r SCSu h neric rbsgr dtivy
version 0.4 loaded (major 246)
[ 1.296821] io scheduler noop registered
[ 1.296841] io scheduler deadline FAgAs: rodl
[not l.2d9/0i8] ooulcheduler cfq registered (default)
[ 1.302692] rga 1010c000.rga: rga ion clients/3.ate0smoduses.de : No su h f3le026] rga: Driver loaded succesfully
[ 1.303156] rga: Module initialized.
[ or d4r6cto]yr
-hdmi 20034000.onm.: rockchip_hdmiv1_set_pwr_mode change pwr_mode 0 --> 1
[ 1.406809] rk-hdmi 20034000.hdmi: rockchip_hdmiv1_set_pwr_mode change pwr_mode LOegi_PWRun[i g /.cri0ts] rkthpmemount40.0 hdmi: hdmi probe success.
[ 1.407987] IEP Power ON
[ 1.408066] iep ion client create success!
[ 1.408528] IEP Power OFF
[ 1.408563] IEP Driver loaded succesfully
[ 1.408712] Module initialized.
[ 1.409234] cvbs connect to lcdc0
[ 1.409302] rk312x-lcdc lcdc0: lcdc0: dclk:27000000>>fps:63
[ 1.409506] rk3036-tve 1010e200.tve: rockchip,rk312x-tve tv encoder probe ok
[ 1.412422] dma-pl330 20078000.pdma: Loaded driver for PL330 DMAC-2364208
[ 1.412462] dma-pl330 20078000.pdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-16 Num_Events-16
[ 1.413342] rk_serial.c v1.8 2014-03-04
[ 1.413692] 20060000.serial: ttyS0 at MMIO 0x20060000 (irq = 52) is a rk29_serial.0
[ 1.414115] serial 20060000.serial: membase e3452000
[ 1.420439] loop: module loaded
[ 1.420569] i2c-core: driver [mpu6050B1] using legacy suspend method
[ 1.420594] i2c-core: driver [mpu6050B1] using legacy resume method
[ 1.420621d np.
u_init: Probe name mpu6050B1
[ 1.420969] ak8963_mod_init: Probe name ak8963_mod
[ 1.422322] SCSI Media Changer driver v0.25
[ 1.422969] tun: Universal TUN/TAP device driver, 1.6
[ 1.422996] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.423295] vmac_init.
[ 1.424411] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[ 1.424443] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[ 1.424468] stmmac_probe_config_dt: clock input or output? (input).
[ 1.424491] stmmac_probe_config_dt: TX delay(0x30).
[ 1.424512] stmmac_probe_config_dt: RX delay(0x10).
[ 1.424611] stmmac_probe_config_dt: is rockchip,rk312x-gmac
[ 1.424631] stmmc_pltfr_init:
[ 1.424649] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[ 1.424745] stmmc_pltfr_init: init for RGMII
[ 1.424771] tx delay=0x30
[ 1.424771] rx delay=0x10
[ 1.425005] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.425027] Normal descriptors
[ 1.425043] Ring mode enabled
[ 1.425061] DMA HW capability register supported
[ 1.425080] RX Checksum Offload Engine supported (type 2)
[ 1.425100] TX Checksum insertion supported
[ 1.425116] Wake-Up On Lan supported
[ 1.425199] Enable RX Mitigation via HW Watchdog Timer
[ 1.426209] PPP generic driver version 2.4.2
[ 1.426587] PPP BSD Compression module registered
[ 1.426614] PPP Deflate Compression module registered
[ 1.426649] PPP MPPE Compression module registered
[ 1.426671] NET: Registered protocol family 24
[ 1.426725] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.426751] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.426774] Rockchip WiFi SYS interface (V1.00) ...
[ 1.426850] esp_mem_init enter date Apr 20 2016 18:32:01
[ 1.426871] esp_mem_init VERSION [V2.5]
[ 1.426957] esp_mem_init complete
[ 1.427116] usbcore: registered new interface driver catc
[ 1.427211] usbcore: regint Mou nin inoorfaceedsystr kaw.th
[ 1.427237] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Eteeinet dniver
[c pt./loc34- osbc.. : rone.t
red new interface driver pegasus
[ 1.427423] usbcore: registered new interface driverext48
50
[ 1.427510] usbcore: registered new interface driver r8152
[ 1.427534] hso: drivers/net/usb/hso.c: Option Wireless
eg n 1.un76ng]/ucsbporel ceg-ptermdune ..n erface driver hso
[ 1.427804] usbcore: registered new interface driver asix
[ 1.427897] usbcALe Creld ner l ae iit/moduees/3.er.0/8od7l_s7dap: N 1.42fil5 ousbiorctoregistered new interface driver cdc_ether
[ 1.428074] usbcore: registered new interface driver cdc_eem
[ 1.428175] usbcore: registered new interface driver dm9601
[ 1.428257] usbcdon:
gistered new interface driver dm9620
[ 1.428354] usbcore: registered new interface driver smsc75xx
[ 1.428466] usbcore: registered new interface driver smsc95xx
[ FA42L5 0ouud note: registered loaintlrfamo uris/3 g062/modul .1.428633] udec: N: regi fered new interfaor dr1080 ne
[ 1.428714] usbcore: registered new interface driver plusb
[ 1.428794] usbcore: registered new interface driver rndis_host
[ 1.428875] usbcore: registered new interface driver cdc_subset
[ 1.428955] usbcore: registered new interface driver zaurus
[ 1.429049] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1.429178] usbcore: registered new interface driver int51x1
[ 1.429262] usbcore: registered new interface driver kalmia
[ 1.429343] usbcore: registered new interface driver ipheth
[ 1.429431] usbcore: registered new interface driver sierra_net
[ 1.429513] usbcore: registered new interface driver cx82310_eth
[ 1.429614] usbcore: registered new interface driver cdc_ncm
[ 1.429708] usbcore: registered new interface driver qmi_wwan
[ 1.429791] usbcore: registered new interface driver cdc_mbim
[ 1.429815] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.431765] EHCI: ehci_rk_probe e3480000 e3480010
[ 1.431801] rockchip_ehci_host 101c0000.usb: EHCI Host Controller
[ 1.431863] rockchip_ehci_host 101c0000.usb: new USB bus registered, assigned bus number 1
[ 1.432508] rockchip_ehci_host 101c0000.usb: irq 43, io mem 0x101c0000
[ 1.445863] rockchip_ehci_host 101c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.446016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.446048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446075] usb usb1: Product: EHCI Host Controller
[ 1.446099] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[ 1.446123] usb usb1: SerialNumber: 101c0000.usb
[ 1.447056] hub 1-0:1.0: USB hub found
[ 1.447105] hub 1-0:1.0: 1 port detected
[ 1.447488] EHCI: ehci_rk_probe ok
[ 1.447671] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.447904] ohci-rockchip 101e0000.usb: RK OHCI Host Controller
[ 1.447958] ohci-rockchip 101e0000.usb: new USB bus registered, assigned bus number 2
[ 1.448042] ohci-rockchip 101e0000.usb: irq 64, io mem 0x101e0000
[ 1.508924] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.508959] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.508987] usb usb2: Product: RK OHCI Host Controller
[ 1.509012] usb usb2: Manufacturer: Linux 3.10.0 ohci_hcd
[ 1.509035] usb usb2: SerialNumber: 101e0000.usb
[ 1.509870] hub 2-0:1.0: USB hub found
[ 1.509930] hub 2-0:1.0: 1 port detected
[ 1.510563] usbcore: registered new interface driver cdc_acm
[ 1.510590] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.510709] usbcore: registered new interface driver usblp
[ 1.510805] usbcore: registered new interface driver cdc_wdm
[ 1.510954] usbcore: registered new interface driver usb-storage
[ 1.511039] usbcore: registered new interface driver ums-alauda
[ 1.511133] usbcore: registered new interface driver ums-cypress
[ 1.511218] usbcore: registered new interface driver ums-datafab
[ 1.511299] usbcore: registered new interface driver ums_eneub6250
[ 1.511379] usbcore: registered new interface driver ums-freecom
[ 1.511462] usbcore: registered new interface driver ums-isd200
[ 1.511542] usbcore: registered new interface driver ums-jumpshot
[ 1.511623] usbcore: registered new interface driver ums-karma
[ 1.511703] usbcore: registered new interface driver ums-onetouch
[ 1.511788] usbcore: registered new interface driver ums-sddr09
[ 1.511870] usbcore: registered new interface driver ums-sddr55
[ 1.511950] usbcore: registered new interface driver ums-usbat
[ 1.512146] usbcore: registered new interface driver usbserial
[ 1.512233] usbcore: registered new interface driver usbserial_generic
[ 1.512305] usbserial: USB Serial support registered for generic
[ 1.512391] usbcore: registered new interface driver ftdi_sio
[ 1.512459] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.512636] usbcore: registered new interface driver option
[ 1.512705] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.512927] usbcore: registered new interface driver trancevibrator
[ 1.512952] usb20_otg: version 3.10a 21-DEC-2012
[ 1.513621] e3500040
[ 1.513650] Core Release: 2.91a
[ 1.513671] Setting default values for core params
[ 1.513928] Using Buffer DMA mode
[ 1.513952] Periodic Transfer Interrupt Enhancement - disabled
[on
5done.] Multiprocessor Interrupt EnhanceBegin: Running /s[ 1.513994]t OmG.V. PARAM: 0, OTG VER FLAG: 0
[ 1.514012] ^^^^^^^^^^^^^^^^^Device Mode
[ 1.514037] Dedicated Tx FIFOs mode
[ 1.514073] pcd_init otg_dev = c5a12200
[ 1.514432] usb20_otg 10180000.usb: DWC OTG Controller
[ 1.514499] usb20_otg 10180000.usb: new USB bus regdone.ed, assigned bus number 3
[ 1.514560] usb20_otg 10180000.usb: irq 42, io mem 0x00000000
[ 1.514771] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.514806] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.514833] usb usb3: Product: DWC OTG Controller
[ 1.514858] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 1.514882] usb usb3: SerialNumber: 10180000.usb
[ 1.515783] hub 3-0:1.0: USB hub found
[ 1.515832] hub 3-0:1.0: 1 port detected
[ 1.516456] usb20_host: version 3.10a 21-DEC-2012
[ 1.517400] usbcore: registered new interface driver xpad
[ 1.517524] usbcore: registered new interface driver usb_acecad
[ 1.517638] usbcore: registered new interface driver aiptek
[ 1.517740] usbcore: registered new interface driver gtco
[ 1.517837] usbcore: registered new interface driver hanwang
[ 1.517932] usbcore: registered new interface driver kbtab
[ 1.518044] usbcore: registered new interface driver wacom
[ 1.518066] ==gsl_ts_init==
[ 1.518166] GSLX680 Enter gsl_ts_probe
[ 1.613241] dwc_otg_hcd_suspend, usb device mode
[ 1.760767] usb 1-1: new high-speed USB device number 2 using rockchip_ehci_host
[ 1.839452] gsl_ts_probe--1269, i2c_master_recv fail
[ 1.839498] gslX680: probe of 0-0041 failed with error -11
[ 1.839575] ret=0
[ 1.840231] sensor_register_slave:mma8452,id=17
[ 1.840259] sensor_register_slave:gs_mc3230,id=23
[ 1.840277] gsensor_init
[ 1.840296] sensor_register_slave:mpu6880_acc,id=24
[ 1.840316] sensor_register_slave:cm3217,id=47
[ 1.840336] sensor_register_slave:cm3218,id=48
[ 1.840736] .. rk pwm remotectl v1.1 init
[ 1.841146] input: 20050030.pwm as /devices/20050030.pwm/input/input0
[ 1.847452] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[ 1.847541] i2c /dev entries driver
[ 1.848189] IR NEC protocol handler initialized
[ 1.848216] IR RC5(x) protocol handler initialized
[ 1.848235] IR RC6 protocol handler initialized
[ 1.848253] IR JVC protocol handler initialized
[ 1.848271] IR Sony protocol handler initialized
[ 1.848289] IR RC5 (streamzap) protocol handler initialized
[ 1.848308] IR SANYO protocol handler initialized
[ 1.848327] IR MCE Keyboard/mouse protocol handler initialized
[ 1.848824] usbcore: registered new interface driver uvcvideo
[ 1.848850] USB Video Class driver (1.1.1)
[ 1.848873] CamSys driver version: v0.27.1, CamSys head file version: v0.10.0
[ 1.848900] E:camsys_soc_init(87): camsys isn't support soc: 0x31260001!
[ 1.851160] i2c-core: driver [bq27320] using legacy suspend method
[ 1.851192] i2c-core: driver [bq27320] using legacy resume method
[ 1.851958] device-mapper: uevent: version 1.0.3
[ 1.852494] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 1.853203] Bluetooth: HCI UART driver ver 2.2
[ 1.853232] Bluetooth: HCI H4 protocol initialized
[ 1.853252] Bluetooth: HCILL protocol initialized
[ 1.853272] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.19
[ 1.853293] rtk_btusb: Register usb char device interface for BT driver
[ 1.853702] usbcore: registered new interface driver rtk_btusb
[ 1.859417] cpufreq version 1.0, suspend freq 1008 MHz
[ 1.859793] cpuidle: using governor ladder
[ 1.859817] cpuidle: using governor menu
[ 1.859888] Synopsys Designware Multimedia Card Interface Driver
[ 1.859911] MHSC version = Ver 2.00 2015-06-10
[ 1.860355] dw cru_regsbase addr 0x124.
[ 1.860380] dw cru_reset_offset val 3.
[ 1.860408] dwmmc_rockchip 1021c000.rksdmmc: Version ID is 270a
[ 1.860470] dwmmc_rockchip 1021c000.rksdmmc: failed to get hpclk_mmc
[ 1.860915] dwmmc_rockchip 1021c000.rksdmmc: Using external DMA controller.
[ 1.861317] dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc0]
[ 1.861601] 1358..dw_mci_set_ios: no card. [mmc0]
[ 1.878874] 1358..dw_mci_set_ios: no card. [mmc0]
[ 1.898593] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaro
Welcome to Uor init[mmc0]
[ 1.898631] dwmmc_rockchip 1021c000.rksdmmc: DW MMC controller at irq 48, 32 bit host data width, 256 deep fifo
[ 1.898651] dwmmc_rockchip 1021c000.rksdmmc: 1 slots initialized
[ 1.899184] dw cru_regsbase addr 0x124.
[ 1.899212] dw cru_reset_offset val 1.
[ 1.899239] dwmmc_rockchip 10214000.rksdmmc: Version ID is 270a
[ 1.899300] dwmmc_rockchip 10214000.rksdmmc: failed to get hpclk_mmc
[ 1.900131] dwmmc_rockchip 10214000.rksdmmc: Using external DMA controller.
[ 1.900456] dw_mci_init_slot: fmin=400000, fmax=37500000 [mmc1]
[ 1.901117] 1358..dw_mci_set_ios: no card. [mmc1]
[ 1.908964] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.908991] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.909011] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 1.909757] hub 1-1:1.0: USB hub found
[ 1.909946] hub 1-1:1.0: 4 ports detected
[ 1.918218] 1358..dw_mci_set_ios: no card. [mmc1]
[ 1.937888] 1358..dw_mci_set_ios: no card. [mmc1]
[ 1.937918] dwmmc_rockchip 10214000.rksdmmc: DW MMC controller at irq 46, 32 bit host data width, 256 deep fifo
[ 1.937935] dwmmc_rockchip 10214000.rksdmmc: 1 slots initialized
[ 1.938268] dw cru_regsbase addr 0x124.
[ 1.938282] dw cru_reset_offset val 2.
[ 1.938297] dwmmc_rockchip 10218000.rksdmmc: Version ID is 270a
[ 1.938338] dwmmc_rockchip 10218000.rksdmmc: failed to get hpclk_mmc
[ 1.938608] dwmmc_rockchip 10218000.rksdmmc: Using external DMA controller.
[ 1.938913] dw_mci_init_slot: fmin=200000, fmax=37500000 [mmc2]
[ 1.939129] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.957548] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.977234] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.977262] dwmmc_rockchip 10218000.rksdmmc: DW MMC controller at irq 47, 32 bit host data width, 256 deep fifo
[ 1.977279] dwmmc_rockchip 10218000.rksdmmc: 1 slots initialized
[ 1.977569] leds-gpio leds.18: pins are not configured from the driver
[ 1.977976] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.980446] usbcore: registered new interface driver usbhid
[ 1.980467] usbhid: USB HID core driver
[ 1.981068] zram: Created 1 device(s) ...
[ 1.981658] ashmem: initialized
[ 1.981855] logger: created 256K log 'log_main'
[ 1.982031] logger: created 256K log 'log_events'
[ 1.982221] logger: created 256K log 'log_radio'
[ 1.982380] logger: created 256K log 'log_system'
[ 1.983918] input: rk29-keypad as /devices/2006c000.adc/key.21/input/input1
[ 1.985303] ------------[ cut here ]------------
[ 1.985327] WARNING: at drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x4c/0xb4()
[ 1.985339] autorequest GPIO-27
[ 1.985348] Modules linked in:
[ 1.985365] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.0 #18
[ 1.985395] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ 1.985417] [<c001175c>] (show_stack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
[ 1.985438] [<c0036278>] (warn_slowpath_common+0x4c/0x68) from [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c)
[ 1.985458] [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4)
[ 1.985479] [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4) from [<c029a44c>] (gpiod_direction_input+0x58/0x1f0)
[ 1.985503] [<c029a44c>] (gpiod_direction_input+0x58/0x1f0) from [<c066055c>] (rk312x_platform_probe+0x46c/0x5a4)
[ 1.985529] [<c066055c>] (rk312x_platform_probe+0x46c/0x5a4) from [<c030c784>] (platform_drv_probe+0x14/0x18)
[ 1.985550] [<c030c784>] (platform_drv_probe+0x14/0x18) from [<c030b54c>] (really_probe+0xa8/0x20c)
[ 1.985570] [<c030b54c>] (really_probe+0xa8/0x20c) from [<c030b7a8>] (driver_probe_device+0x30/0x48)
[ 1.985590] [<c030b7a8>] (driver_probe_device+0x30/0x48) from [<c030b820>] (__driver_attach+0x60/0x84)
[ 1.985609] [<c030b820>] (__driver_attach+0x60/0x84) from [<c0309ffc>] (bus_for_each_dev+0x50/0x90)
[ 1.985628] [<c0309ffc>] (bus_for_each_dev+0x50/0x90) from [<c030adac>] (bus_add_driver+[xac/0x20c)
[ 1.985647] [<c030wdac
iver_reg OK ] Listening on ude [<c030bcfc>] (driver_registe[ OK om [<c00086a4>] (yo_ene_initc
l+0x34/0[ OK 691] [<c00086a4>] sdo_onetty.slice.
34/0xc8[rom [<c0b9fb28>L (do_initcallsurnal Socket.
1.985713] [<c0b9fb28>] (do_initcal +0 0Sa0)tfno Remo0b9fbe8>] nd Kernei it_f Seatle+0x90
0x130)[2 1.9857[4m] <e0chfd t>] (terneryited foleabse+0x90/0x13[32om [<c082fe6 >] (keinel_inidevx8/0xe4)
[ e 1
85755] [<c082fe64>] (kernel_init+0x8/0xe4) from c000 Star (ngtCfeate Sra+ix 4/vxce)N
[e in 9dev..]
--[ end trace 8c88a9ab662680a0 ]---
eady.eni9g6o2 /deo/icitp-spdif 1ti040l0ts dam:d Pipf d t2m 2K m0.
[ 1.9885[9[3amdioKrk3[0x Lditeni3g2o. Jo rnk312xdhifi c->t.o
kchip-i2s.[ mapping ok ] C1eated0s] audio-rk312x audio-rS31cx.14: rk312x-voice <-> rockchip-i2s.1 map i k
[ rt1n9893e5] oldpo-g 3llxDevice-...12x.14: noKsink wi Ret fountarget icmote F
[ 1.98s 6P] a.dio-rk312x audio-rk312x.14: ASoC: Failed to add route Mic Jack -> direct -> Mic Bias
[ 1.989376] audio-rk312x audio-rk312x.14: ASoC: no source widget found for Mic B 1.9ting L au ie-nel1Mo312x.14:[C: FOKle addstouin Min Biarn-l diceet -> ev/log[
ias989404] audio-rk312x audio-rk312x.14: ASo : o Surct wg geurfou deforcM.c.
d to add route Mic Bias -> direct -> MICN Mounket.
[ ebug8F4i2e Susto-.k3
x audio-rk312x.14: ASoC: no sink widget found for Mic Bias
[ 1.989446] audi2rk 1K2 aum] ireak31 sl.c4:system-s riASoC:dgeiled tt ydslioe.
Headse[a2m -O ir[ct] >eMihediaar
e Slic1.98
461] audio-rk312x audio-rk312x.14: ASoC: no s[ur32m OKg t 0ou d afor PeUTun
rt[ l Co.s8le.: ASoC: Failed to add [2 H OU R -> ] Stcrt-d Eet S V
audio-rk312x audio-rk312x.[ A3oC:Ano sr]e wilee to suar ooaH OUrLe
9503See "iyste3c2l sudiu- k312em.14: uSeC-load.serti e"d rr de aiOsTL -> direct -> Ext Spk
[ 1.989517] audio-rk312x audio-rk312x.14: ASoC: no source widget found for HPOUTR
[ 1.989531] audio-rk312x audio-rk312x.14: ASoC: Failed to add route HPOUTR -> direct -> Headphone Jack
[ 1.989546] audio-rk312x audio-rk312x.14: ASoC: no source widget found for HPOUTL
[ 1.989559] audio-rk312x audio-rk312x.14: ASoC: Failed to add route HPOUTL -> direct -> Headphone Jack
[ 1.991551] rockchip-hdmi-spdif rockchip-hdmi-spdif.13: rk-hdmi-spdif-hifi <-> 10204000.spdif mapping ok
[ 1.992333] u32 classifier
[ 1.992351] Actions configured
[ 1.992365] Netfilter messages via NETLINK v0.30.
[ 1.992450] nf_conntrack version 0.5.0 (15471 buckets, 61884 max)
[ 1.992944] ctnetlink v0.93: registering with nfnetlink.
[ [32m 1O99 0[0m6] ]NM_TntOd DY: gTFils aystem.ent proxy support initialized, version 4.1.0
[ 1.993048] NF_TPROXY: Mounting FUSE Control File System...
Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1 Mounting C3nf4guration FiletStsmem ..
kernel timezone is -0000
[ 1.993915] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.994115] arp_tables: (C) 2002 David S. Miller
[ 1.994180] TCP: cubic registered
[a i 1l9945.6] NET: Registered protocol family 10
995460] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.995662] sit: IPv6 over IPv4 tunneling driver
[ 1.996224] NET: Registered protocol family 17
] Mouyted 395] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ 1.985[nf uration 6ile]SBridge.ack+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
emi te ed 395] [<c0013e44>] (unwind_backtrace+0x0/0xe0) from [<c001175c>] (show_stack+0x10/0x14)
[ M u1t9d 382] Conabol File ystemteck+0x10/0x14) from [<c0036278>] (warn_slowpath_common+0x4c/0x68)
irewalli[5438] [<c0036278>] (warn_sloedath_common+0x4c/0x68) from [<c0036314>] (warn_slowpath_fmt+0x2c/0x3c)
[ [0 1.9tar37] ulevtCotdp: RFaOl eei 1.11yer in[t[aliz Ofrom [<c02993ec>] (gpio_ensure_requested+0x4c/0xb4)
m2ma iKn) [0m]1Start Lo.d/Save]Raldetooeed.BNEP filters: protocol multicastc>] (rk312x_platform_probe+0x46c/0x5a4[ 1.996776] Bluetooth: BNEP socket layer initialized
[ 1.996787] Bluetooth: HIDP (Human Interface Emulation) ver 1.2om [<c030c784>] (platform_drv_probe+0x14/0x18)
[ 1.996804] Bluetooth: HIDP socket layer initialized18) from [<c030b54c>] (really_probe+0xa8/0x20c)
[ 1.996904] l2tp_core: L2TP core driver, V2[0x20c) from [<c030b7a8>] (driver_probe_device+0x30/0x48)
[ 1.985590] [<c030b7a8>] (driver_probe_devic K 9969m] St2tt_d A: PP oL2nP keaniabdri.er, V2.0/0x84)
[ 1.996945] [WLAN_RFKILL]: Enter rfkill_wlan_init84) from [<c0309ffc>] (bus_for_each_dev+0x50/0x90)
[ 1.997155] [WLAN_RFKILL]: Enter rfkill_wlan_probe90) from [<c030adac>] (bus_add_driver+[xac/0x20c)
[ 1.997174] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[ 1.997186] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.4>] (yo_ene_initc
[ 1.997198] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[ 1.997210] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.997266] [WLAN_RFKILL]: wla[_platdata_par0m] etdt: get properSty: WIFI,poweren_gpio = 43, flags = 0.
[ 1.997299] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 2, flags = 0.2 1.9857[4m][ 1.997312] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio6 >] (keinel_inidevx8/0xe4)
[ 1.997345] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.997410] [BT_RFKILL]: Enter rfkill_rk_init c000 Star (ngtCfeate Sra+ix 4/vxce)N
[ 1.997629] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 17.in 9dev..]
[ 1.997666] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 35.
[ 1.997689] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 42.
[[ 3 m1.OK [ Reached target Local File Systemseup hosush Journal to Persistke_host_irq. .
[ 1.992m ] [ Rm]IRL]: ** dargete oca kchip-i2s.[ mapping ok ] C1eated0s] audio-rk312x au] [BT_RFKILL]: ap6212 device registered.p-i2s.1 map i k
1.14 Zoom by ippactmng L(B:8R)ise3n2x-crm iatvrfaion: v0 [ rt1n9893e5] oldpo-g 3llxDevice-...12x.14: noKsink wite 1.998469] rk_cif 1010a 0. if rtactieg Tcll_ilmuxuch Td Wrt eeO cif_ptnma D ta..t
[ 98 oc]cameca-pdrv s5k4ec_back_3: Probing sk312x audio-rk312x.14: ASoC: Failed to add route Mic Jack -> direct -4ec_back_3
[ 1.999349] VFP support v0.3: imple nt St1rainh tee cunsol2 parma30 .aor Mic B 1.9ting L au ie-nel1Mo312x.14:[C: FOKle addstouin Min Biarn-l diceet -> ev/log[ iant 7 rev 5
. 9ta90ingku12x_susnend_initx.14: ASo : o Surct wg geurfou deforcM.c.
[ 1...99647] Registering SWP/SWPB emulation handlerket.
[ 1.999666] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 2000000@9dc00000
[ 2.004956] ddrfreq: verion 1.2 20140526nd for Mic Bias
[ 2.004986] ddrfreq: normal 492MHz v[d[o;10mFAp E40M0z ]iFao_4k 396MHz duSlv ew s96e keidap 0MHz seepeny 1emcHl sebtus 492sHz ir[ct] >eMihediaar
-freq=0004999] ddrfreq: aut e Slic1.98
[ 2.005009] ddrfreq: auto-freq-table[0] 240MHzaudio-rk312x audio-rk312x.14: ASoC: no s[ur32m OKg t 0ou d afor [ 2.005018] ddrfreq: auto-freq-table[1] 324MHz
[ 2.005027] ddrfreq: auto-freq-table[2] 396MHz] Stcrt-d Eet S V
[ 2.005037] ddrfreq: auto-freq-table[3] 528MHzto suar ooaH OUrLe
[ 2.032966] rk818_ldo8: disabling uSeC-load.serti e"d rr de aiOsTL -> direct -> Ext Spk
[ 2.033890] rk818_ldo4: disabling312x.14: ASoC: no source widget found for HPOUTR
[ 2.034565] regulator-dummy: disabling14: ASoC: Failed to add route HPOUTR -> direct -> Headphone Jack
[ 2.[34341] O=====] S===t====l=sh ========== P==si=t=n==Storage. found for HPOUTL
[ 2.034758] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== HPOUTL -> direct -> Headphone Jack
[ 2.034770] =======================================================dif-hifi <-> 10204000.spdif mapping ok
[ 2.034783] WiFi driver ( o r bySRockingp,Vea e.10.aFDleOF.64biandinire
[rie ..034886] dhd_module_init: inred
[ 2.034904] ======== bcm_wlan_set_plat_data ========
[ 2.034916] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter4 max)
[ 2.034967] host_oob_irq: 169 egistering with nfnetlink.
[ 2.034978] host_oob_irq_flags=4gTFils aystem.ent proxy support initialized, version 4.1.0
[ [3034 OK] wifi_rlet Teml Pldm Ent ro W ite Ou3 020] mewDatap adapter 'DHD generic adapter'
[ 2.035037] pcd_pullup, is_on 0T Ltd.
[ 2.035076] wifi_platform_set_power = 1tStsmem ..
[ 2.035089] ======== PULL WL_REG_ON HIGH! ========
[ 2.035101] [WLAN_RFKILL]: rockchip_wifi_power: 1re Team
[ 2.035114] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 2.035127] [WL[N_2m O 0hi] wtfrtee Crolte V: oiatiie Fifes ane volectercos.r
[a i 1l9945.6] NET: Registered protocol family 10 l is disabled.
[ 2.035133] file system registeredfilter Core Team
[ 2.036592] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.036614] android_usb gadget: Number of LUNs=2
[ 2.036628] lun0: LUN abStarilng Neo med Tm)e
S r.0iz6t1] .lun1: LUN: removable file: (no medium)
[ 2.036985] and o _ Startieg: andte U_MP beut Sys 2o0t/1h9t owns.r_
nit: Probe name sensors
[ 2.037141] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[ 2.037734] rtc_hym8563 0-0051: setting system clock to 2011-01-02 05:20:56 UTC (1293945656)
[ 2.044645] usbcore: registered new interface driver snd-usb-audio
[ 2.044669] ALSA device list:
[ 2.044681] #0: RK_RK312X
[ 2.044691] #1: RK-HDMI-SPDIF
[ 2.045296] Freeing unused kernel memory: 360K (c0b9f000 - c0bf9000)
[ 2.084878] rk30xxnand_ko: module license '' taints kernel.
[ 2.084906] Disabling lock debugging due to kernel taint
[ 2.086676] rknand_init:
[ 2.086758] No.1 FLASH ID:ad de 14 a7 42 4a
[ 2.093168] FTL version: 5.0.25 20150515
[ 2.105204] Cam_Powerdowm
[ 2.105318] rk818_ldo8: operation not allowed
[ 2.134644] [WLAN_RFKILL]: wifi turn on power. 43
[ 2.174114] rkl do4: opera]iSt not aUldwed U[ bo1t3Sys]emsboot/S1utdown.
l-speed USB device number 3 using rockchip_ehci_host
[ 2.213359] ret: 0
[ 2.238490] min_w = 800,min_h = 600 ,max_real_w = 2592,max_real_h = 1944,max_w = 2592,max_h =1944
[ 2.240037] s5k4ec_back_3(rk_cam_sensor:169): write reg(0xfcfc, val:0xd000) failed, try to write again!
ta get2.2y3022] ime4ecnchcon3zrd_cam_sensor:169): write reg(0xfcfc, val:0xd000) failed, try to write again!
[ 2.243053] s5k4ec_back_3(rk_cam_sensor:387): write array failed!
[ 2.243068] s5k4ec_back_3(rk_cam_sensor:671): soft reset failed
[ 2.243068]
[ 2.264071] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2c, val:0x7000) failed, try to write again!
[ 2.265571] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2c, val:0x7000) failed, try to write again!
[ 2.267066] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2c, val:0x7000) failed, try to write again!
[ 2.268561] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2e, val:0x1a4) failed, try to write again!
[ 2.270057] s5k4ec_back_3(rk_cam_sensor:169): write reg(0x2e, val:0x1a4) failed, try to write again[
2K2 150m] sta4tcd uaev K(rkelaDeveneoManag): write reg(0x2e, val:0x1a[32iled, tt] wrice agaarget[Pat 2.
3367] s5k4ec_back_3(rk_cam_sensor:335): read reg(0xf12 val:0x0) failed, try to re gain!t
r ng C273398les5k4nerbtck 3hrk_cam_sensor:718): error: mismatched pid = 0xffff
s r ..2.73oot]
96281] usb 1-1.1: New USB device found, idVendor=24ae, idProduct=2010
[ 2.296308] usb 1-1.1: New USB device str[3: fr=1, Prm] St=r,eS CopyNruber 0
e t 2.w9i32 the root was ro.
] usb 1-1.1: Product: Rapoo 2.4G Wireless Device
[ 2.296343] usb 1-1.1: Manufacturer: RAPOO
[ 2.299846] input: RAPOO Rapoo 2.4G Wireless Device as /devices/101c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 2.300342] hid-generic 0003:24AE:2010.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-101c0000.usb-1.1/input0
[ 2.302138] FtlInit 0
[ 2.302822] nand part : offset end flag
[ 2.302882] rknand_uboot : 2000 - 4000 (00)
[ 2.303624] rknand_misc : 4000 - 6000 (00)
[ 2.303710] input: RAPOO Rapoo 2.4G Wireless Device as /devices/101c0000.usb/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
[ 2.304070] rknand_resource : 6000 - e000 (00)
[ 2.304439] hid-generic 0003:24AE:2010.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-101c0000.usb-1.1/input1
[ 2.304507] rknand_boot : e000 - 1e000 (00)
[ 2.304929] rknand_backup : 1e000 - 3e000 (00)
[ 2.305427] rknand_linuxroot : 3e000 - e5c000 (00)
[ 2.307627] init_nand_blk_dev:ret = 0
[ 2.329436] udevd[137]: starting version 175
[ 2.341351] wifi_platform_bus_enumerate device present 1
[ 2.341374] ret: 0
[ 2.341391] ======== Card detection to detect SDIO card! ========
[ 2.341409] mmc2:mmc host rescan start!
se n t2.3k in6erhic-g..APOO Rapoo 2.4G Wireless Device as /devices/101c0000.usb/usb1/1-321 1.1/1m] S2/inedt/Snp Ra
2. St274ing R_sowredSomnd C 2.ta89...sb-1.1/input2aRionO
s[a e 2u55So4k] rk_sdmmc: BOOT dw_mcarilng Neo med Tm)e
_setup_bus: argue c kOm mkaroead od t80000 Sz forketi.[mmc2] (no medium)
wn CIS tuple 0x80 (2 bytes)uimg unknandte U_MP beut Sys 2o0t/1h9t owns.r_
[ 2.604331] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) nit: Probe name sensors
[ 2.606385] mmc2: queuing unknow IS Sla 0xn0 (ccbunts)S between two gsensors 2013-09-01
[ 2.037734] rtc_hym8563 0-0051: setting system clock to 201rv e...05:20:56 UTC (1293945656)
[ 2.044645] usbcore: registered new interface driver snd-usb-audio 939] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)044669] ALSA device list:
[ 2.715373] Cam_Powerdowm2X
[ 2.7 6774] rtcng s-Bumc2: Busystem Messa spees (..o
S art2.7T6rn ]n kifd.mc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 2.747068] rk_sdmmc: BOOT Bus speed=37500000Hz,Bus width=4bits.[ c ]Star ng.Tur596n min_w = 80 Wifn_. = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200/1h9t owns.r_
[ . 5 9 2] mScar inw heghtrueed SDIO ecocar aamebdffss ... nit: Probe name sensors
[ 2.606385] mmc2: queuing unknow IS Sla 0xn0 (ccbunts)S between two gsensors 2013-09-01
Starting Net_front_4(rk_cam_sensor:169): write reg(0x103, val:0x1) failed, try to write again!
[ 2.044645] usbcor[ k 2nage77..new interface driver snd-usb-audio 939] mmc2: queuing unknown CIS tuple 0x80 (7v2659_front_4(rk_cam_sensor:169): write reg(0x103, val:0x1) failed, try to write again!
[ 2.7551 v26 9tfronng4(rB: Smt ens C:169)equenty Seal0ng03, ean:0r1) f"oled,and" to write again!
[ 2.755241] ov2659_front_4(rk_cam_sensor:387): write array failed!
[ 2.755259] ov2659_front_4(rk_cam_sensor:671): soft reset failed00Hz (slot req 37500000Hz, actual 3750
[ 2.755259] rk30xxnand_ko: module license '' taints kernel.
[ 2.767952] bcmsdh_register: register client drivertaint
o[ com2.7u97o3]h cisdw_se.m.ad mrdh_sdmmc_probe Enter
bcmsdh_sdmmc_probe EnterH ID:ad de 14 a7 42 4a
c[ ron7jobs.9] found adapter info 'DHD generic adapter'
[ 2.770437] F1 na u Strrad @ x18 a0a0ron job0..a6
r:335): read reg(0x300a val:0x0) failed, try to read again!v:0x0 pkg:0x4
[ 2.777240] ov2659_fron k cam_sensotart9): road Sepvide...iled
[ 2.777386] DHD: dongle ram size is set to 524288(ori[ 8OKat [00]/S1utdown.
l-speed USB device number 3 using rockchip_ehci_host Re h2. t7rg8] wifi_s.
form_get_ Starting Console System Startup Logging...
mac_addr38490] min_w = 800,min_h = 600 ,max_real_w = 2592,max_real_h = 1944,max_w = 2592,max_h =1944
[ 2.777713] ======== bcm_wlan_get_mac_address ========g(0xfcfc, val:0xd000) failed, try to write again!
[ 2.777728] [WLAN_RFKILL]: rockchip_wi[i2mac_K dr[0e] Stnree.fc, val:0xd000) failed, try to write again!
LL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]ite array failed!
[ 2.777765] [WLAN_RFKILL]: This mac address is not valid, ignored...
[ 2.777789] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
[ 2.777875] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txtrite again!
[ 2.778879] wl_create_event_handler(): thread:wl_event_handler:f6 started failed, try to write again!
[ 2.779211] tsk Enter, tsk = 0xddba149c:169): write reg(0x2c, val:0x7000) failed, try to write again!
[ 2.782271] dhd_attach(): thread:dhd_watchdog_thread:f7 startedal:0x1a4) failed, try to write again!
[ 2.782486] dhd_attach(): thread:dhd_dpc:f8 started reg(0x2e, val:0x1a4) failed, try to write again[
[ 2.782634] dhd_dpc_thread: set dpc_cpucore 0 from config.txt 2K2 150m][ 2.782769] dhd_attach(): thread:dhd_rxf:fa startedl:0x1a[32iled, tt] wrice agaarget[Pat 2.
[ 2.782806] dhd_deferred_work_init: work queue initialized ) failed, try to re gain!t
[ 2.783267] dhdsdio_probe_init: set use_rxchain 0 from config.txt r ng C273398les5k4nerbt[ 2.801490] Dongle Host Driver, version 1.201.59.5 (r506368)
[ 2.801490] Compiled in drivers/net/wireless/bcmdhd on Apr 20 2016 at 18:32:17
[ 2.802392] Register interface [wlan0] MAC: 04:e6:76:52:b1:dcProduct=2010
[ 2.802392] usb 1-1.1: New USB device str[3: fr=1, Prm] St=r,eS CopyNruber 0
[ 2.802431] dhd_prot_ioctl : bus is down. we have nothing to do
[ 2.802538] bcmsdh_oob_intr_unregister: Enter
[ 2.802555] bcmsdh_oob_intr_unregister: irq is not registered
[ 2.802579] dhd_txglom_enable: enable 0eless Device as /devices/101c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/input/inpu[ 2.802593] dhd_bus_devreset: WLAN OFF DONE
[ 2.802705] wifi_platform_set_power = 00001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Devic[ 2.802722] ======== PULL WL_REG_ON LOW! ========
[ 2.802736] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 2.882570] Cam_Powerdowm : offset end flag
[ 2.902201] [WLAN_RFKILL]: wifi shut off power.000 (00)
[ 2.902232] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0)
[ 2.902246] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.1/input/inpu[ 2.902369] dhd_module_init: Exit err=0
[ 2.951408] ret: 0_resource : 6000 - e000 (00)
[ 2.980959] soc-camera-pdrv gc0329_front_5: Probing gc0329_front_5: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wirel[ 3.049802] ret: 01c0000.usb-1.1/input1
[ 3.197360] Cam_Powerdowm : e000 - 1e000 (00)
[ 3.202750] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480
[ 3.218477] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[ 3.219468] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[ 3.220447] gc0329_front_5(rk_cam_sensor:169): write reg(0xfc, val:0x16) failed, try to write again!
[ 3.220567] EXT4-fs (rknand_linuxroot): 1 orphan inode deleted
[ 3.220586] EXT4-fs (rknand_linuxroot): recovery complete
[ 3.232828] EXT4-fs (rknand_linuxroot): mounted filesystem with ordered data mode. Opts: (null)
[ 3.248043] gc0329_front_5(rk_cam_sensor:335): read reg(0x0 val:0x0) failed, try to read again!
[ 3.248088] gc0329(917): gc0329 read chip id high byte failedes/101c0000.usb/usb1/1-321 1.1/1m] S2/inedt/Snp Ra
[ 3.248088] ng R_sowredSomnd C 2.ta89...sb-1.1/input2aRionO
[ 3.248110] gc0329(924): error: gc0329 mismatched pid = 0x0
[ 3.248110]
[ 3.248133] gc0329_front_5(rk_cam_sensor:718): error: mismatched pid = 0x0
[ 3.248133]
[ 3.354822] Cam_Powerdowm
[ 3.423771] ret: 0
[ 3.453297] soc-camera-pdrv gc2035_back_6: Probing gc2035_back_6
[ 3.541871] ret: 0
[ 3.601255] systemd[1]: Failed to insert module 'autofs4'
[ 3.620995] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 3.621400] systemd[1]: Detected architecture arm.
[ 3.627140] systemd[1]: Set hostname to <firefly>.
[ 3.689406] Cam_Powerdowm
[ 3.689440] rk_cam_io(1128):SENSOR_PWRSEQ_PWRDN failed
[ 3.689535] soc-camera-pdrv gc2035_back_6: Cannot get I2C adapter #2. No driver?
[ 3.797649] Cam_Powerdowm
[ 3.797683] rk_cam_io(1128):SENSOR_PWRSEQ_PWRDN failed
[ 3.797701] rk_cam_io(1117):SENSOR_PWRSEQ_HWRST failed
[ 3.866525] ret: 0
[ 3.896081] soc-camera-pdrv gc0308_front_7: Probing gc0308_front_7
[ 3.949764] systemd[1]: [/lib/systemd/system/fbset.service:7] Unknown lvalue 'type' in section 'Service'
[ 3.954155] systemd[1]: [/lib/systemd/system/wifi-on.service:7] Unknown lvalue 'type' in section 'Service'
[ 3.977372] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.981401] systemd[1]: Reached target Swap.
[ 3.981499] systemd[1]: Starting Swap.
[ 3.984748] ret: 0
[ 3.985742] systemd[1]: Created slice Root Slice.
[ 3.985826] systemd[1]: Starting Root Slice.
[ 3.990679] systemd[1]: Listening on udev Kernel Socket.
[ 3.990766] systemd[1]: Starting udev Kernel Socket.
[ 3.991087] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.991162] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.995644] systemd[1]: Created slice System Slice.
[ 3.995753] systemd[1]: Starting System Slice.
[ 4.000832] systemd[1]: Created slice system-getty.slice.
[ 4.000914] systemd[1]: Starting system-getty.slice.
[ 4.005532] systemd[1]: Listening on Journal Socket.
[ 4.005644] systemd[1]: Starting Journal Socket.
[ 4.008340] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.013837] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.018813] systemd[1]: Reached target Encrypted Volumes.
[ 4.018920] systemd[1]: Starting Encrypted Volumes.
[ 4.024054] systemd[1]: Listening on udev Control Socket.
[ 4.024194] systemd[1]: Starting udev Control Socket.
[ 4.027610] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.035801] systemd[1]: Starting Setup Virtual Console...
[ 4.046908] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.047076] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.047650] systemd[1]: Mounted Huge Pages File System.
[ 4.052943] systemd[1]: Listening on Journal Audit Socket.
[ 4.053054] systemd[1]: Starting Journal Audit Socket.
[ 4.058611] systemd[1]: Created slice User and Session Slice.
[ 4.058724] systemd[1]: Starting User and Session Slice.
[ 4.061507] systemd[1]: Starting udev Coldplug all Devices...
[ 4.071615] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.071743] systemd[1]: Starting Remote File Systems (Pre).
[ 4.085426] systemd[1]: Starting Load Kernel Modules...
[ 4.095070] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.095200] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.098189] systemd[1]: Starting Journal Service...
[ 4.107447] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.107590] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.110971] systemd[1]: Mounting Debug File System...
[ 4.120039] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.120308] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.127635] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 4.127750] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 4.131784] systemd[1]: Reached target Slices.
[ 4.131942] systemd[1]: Starting Slices.
[ 4.133132] Cam_Powerdowm
[ 4.133302] soc-camera-pdrv gc0308_front_7: Cannot get I2C adapter #2. No driver?
[ 4.141162] systemd[1]: Started Remount Root and Kernel File Systems.
[ 4.148358] systemd[1]: Started Setup Virtual Console.
[ 4.149364] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
[ 4.161613] systemd[1]: Failed to start Load Kernel Modules.
[ 4.161835] systemd[1]: Unit systemd-modules-load.service entered failed state.
[ 4.162037] systemd[1]: systemd-modules-load.service failed.
[ 4.234566] systemd[1]: Mounted Debug File System.
[ 4.240545] Cam_Powerdowm
[ 4.247769] systemd[1]: Mounting FUSE Control File System...
[ 4.253148] systemd[1]: Mounting Configuration File System...
[ 4.279473] systemd[1]: Starting Apply Kernel Variables...
[ 4.286391] systemd[1]: Starting Load/Save Random Seed...
[ 4.294595] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 4.297781] systemd[1]: Started Rebuild Hardware Database.
[ 4.310998] systemd[1]: Mounted Configuration File System.
[ 4.316171] systemd[1]: Mounted FUSE Control File System.
[ 4.319389] ret: 0
[ 4.323621] systemd[1]: Started Create Static Device Nodes in /dev.
[ 4.330226] systemd[1]: Started udev Coldplug all Devices.
[ 4.337807] systemd[1]: Started Load/Save Random Seed.
[ OK ] Started Restore Sound Card State.
[ OK ] Started Set truecolor framebuffer.
[ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[ OK ] Started Permit User Sessions.
[ OK ] Started Console System Startup Logging.
[ OK ] Found device /dev/ttyFIQ0.
[ OK ] Started Login Service.
Starting Authenticate and Authorize Users to Run Privileged Tasks...
[ OK ] Created slice system-systemd\x2drfkill.slice.
Starting Load/Save RF Kill Switch Status of rfkill0...
Starting Load/Save RF Kill Switch Status of rfkill1...
Starting Load/Save RF Kill Switch Status of rfkill2...
[ OK ] Created slice system-ifup.slice.
[ OK ] Started ifup for wlan1.
Starting ifup for wlan1...
[ OK ] Started ifup for eth0.
Starting ifup for eth0...
[ OK ] Started ifup for sit0.
Starting ifup for sit0...
[ OK ] Reached target Sound Card.
Starting Light Display Manager...
[ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[ OK ] Started Load/Save RF Kill Switch Status of rfkill0.
[ OK ] Started Load/Save RF Kill Switch Status of rfkill1.
[ OK ] Started Load/Save RF Kill Switch Status of rfkill2.
[ OK ] Started Accounts Service.
[ OK ] Started Network Manager.
[ OK ] Reached target Network.
Starting /etc/rc.local Compatibility...
[ OK ] Started OpenBSD Secure Shell server.
Starting OpenBSD Secure Shell server...
[ OK ] Started Light Display Manager.
[ OK ] Started /etc/rc.local Compatibility.
Starting Wait for Plymouth Boot Screen to Quit...
[ OK ] Started Wait for Plymouth Boot Screen to Quit.
[ OK ] Started Serial Getty on ttyFIQ0.
Starting Serial Getty on ttyFIQ0...
[ OK ] Started Getty on tty1.
Starting Getty on tty1...
[ OK ] Reached target Login Prompts.
Starting WPA supplicant...
[ OK ] Started WPA supplicant.
[ OK ] Created slice user-1000.slice.
Starting User Manager for UID 1000...
[ OK ] Started User Manager for UID 1000.
Ubuntu 15.04 firefly ttyFIQ0
firefly login: firefly (automatic login)[/mw_shl_code]
|
|