重新烧写uboot后无法启动

黄鑫荣

emmc换了一片，想试试完全空白的emmc能不能启动成功。
自己编译了整个系统镜像，在原来的emmc上擦除后用maskrom模式下载，可以启动成功。
换了一片emmc后，下载成功。但无法进入界面。
命令行打印如下：

1. DDR Version 1.17 20190115
   
2. In
   
3. Channel 0: DDR3, 800MHz
   
4. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
   
5. Channel 1: DDR3, 800MHz
   
6. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
   
7. 256B stride
   
8. ch 0 ddrconfig = 0x101, ddrsize = 0x20
   
9. ch 1 ddrconfig = 0x101, ddrsize = 0x20
   
10. pmugrf_os_reg[2] = 0x32817281, stride = 0x9
    
11. OUT
    
12. Boot1: 2017-06-09, version: 1.09
    
13. CPUId = 0x0
    
14. ChipType = 0x10, 1827
    
15. SdmmcInit=2 0
    
16. BootCapSize=100000
    
17. UserCapSize=14910MB
    
18. FwPartOffset=2000 , 100000
    
19. SdmmcInit=0 20
    
20. StorageInit ok = 66565
    
21. LoadTrustBL
    
22. No find bl30.bin
    
23. Load uboot, ReadLba = 2000
    
24. Load OK, addr=0x200000, size=0x7a274
    
25. RunBL31 0x10000
    
26. NOTICE:  BL31: v1.3(debug):2bb878d
    
27. NOTICE:  BL31: Built : 11:57:30, Jan  4 2019
    
28. NOTICE:  BL31: Rockchip release version: v1.1
    
29. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
    
30. INFO:    Using opteed sec cpu_context!
    
31. INFO:    boot cpu mask: 0
    
32. INFO:    plat_rockchip_pmu_init(1181): pd status 3e
    
33. INFO:    BL31: Initializing runtime services
    
34. INFO:    BL31: Initializing BL32
    
35. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec  7 06:11:20 UTC 2018 aarch64)
    
36. 
    
37. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
    
38. 
    
39. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
    
40. INFO:    BL31: Preparing for EL3 exit to normal world
    
41. INFO:    Entry point address = 0x200000
    
42. INFO:    SPSR = 0x3c9
    
43. 
    
44. 
    
45. U-Boot 2014.10-RK3399-06 (Apr 22 2019 - 21:09:02)
    
46. 
    
47. CPU: rk3399
    
48. cpu version = 0
    
49. CPU's clock information:
    
50.     aplll = 816000000HZ
    
51.     apllb = 24000000HZ
    
52.     gpll = 800000000HZ
    
53.                aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
    
54.                aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
    
55.                hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    
56.     cpll = 800000000HZ
    
57.     dpll = 800000000HZ
    
58.     vpll = 24000000HZ
    
59.     npll = 24000000HZ
    
60.     ppll = 676000000HZ
    
61. Board:  Rockchip platform Board
    
62. Uboot as second level loader
    
63. DRAM:  Found dram banks: 1
    
64. Adding bank:0000000000200000(000000007fe00000)
    
65. Reserve memory for trust os.
    
66. dram reserve bank: base = 0x08400000, size = 0x01e00000
    
67. 128 MiB
    
68. SdmmcInit = 0 20
    
69. storage init OK!
    
70. Using default environment
    
71. 
    
72. GetParam
    
73. remotectl v0.1
    
74. pwm freq=0xb8320
    
75. pwm_freq_nstime=0x52d
    
76. Load FDT from resource image.
    
77. power key: bank-0 pin-5
    
78. can't find dts node for fixed
    
79. usb bc: can find node by path: /dwc-control-usb/usb_bc
    
80. dwc_otg_check_dpdm: usb bc disconnected
    
81. pmic:rk808
    
82. can't find dts node for pwm1
    
83. set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
    
84. CPU's clock information:
    
85.     aplll = 816000000HZ
    
86.     apllb = 24000000HZ
    
87.     gpll = 800000000HZ
    
88.                aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
    
89.                aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
    
90.                hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    
91.     cpll = 800000000HZ
    
92.     dpll = 800000000HZ
    
93.     vpll = 24000000HZ
    
94.     npll = 24000000HZ
    
95.     ppll = 676000000HZ
    
96. SecureBootEn = 0, SecureBootLock = 0
    
97. 
    
98. #Boot ver: 2019-04-22#1.09
    
99. empty serial no.
    
100. normal boot.
     
101. checkKey
     
102. vbus = 0
     
103. board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
     
104. no fuel gauge found
     
105. no fuel gauge found
     
106. failed to find phy node
     
107. read logo on state from dts [1]
     
108. no fuel gauge found
     
109. Using display timing dts
     
110. Detailed mode clock 150000 kHz, flags[a]
     
111.     H: 1920 2202 2212 2222
     
112.     V: 1080 1090 1100 1125
     
113. bus_format: 100e
     
114. rk lcdc - 0 dclk set: dclk = 150000000HZ, pll select = 1, div = 1
     
115. final DSI-Link bandwidth: 1000 Mbps x 4
     
116. failed to wait for phy clk lane stop state
     
117. ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
     
118. failed to display kernel logo
     
119. checkKey
     
120. vbus = 0
     
121. board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
     
122. got recovery cmd from misc.
     
123. load fdt from resouce.
     
124. vendor read error!
     
125. Set oem_unlocked=0Secure Boot state: 0
     
126. kernel   @ 0x00280000 (0x0125a008)
     
127. ramdisk  @ 0x04bf0000 (0x007b1848)
     
128. bootrk: do_bootm_linux...
     
129.    Loading Device Tree to 0000000004600000, end 0000000004616f78 ... OK
     
130. Add bank:0000000000200000, 0000000008200000
     
131. Add bank:000000000a200000, 0000000075e00000
     
132. WARNING: could not set reg FDT_ERR_BADOFFSET.
     
133. 
     
134. Starting kernel ...
     
135. 
     
136. [    0.000000] Booting Linux on physical CPU 0x0
     
137. [    0.000000] Initializing cgroup subsys cpuset
     
138. [    0.000000] Initializing cgroup subsys cpu
     
139. [    0.000000] Initializing cgroup subsys cpuacct
     
140. [    0.000000] Initializing cgroup subsys schedtune
     
141. [    0.000000] Linux version 4.4.103 (xin@xin-virtual-machine) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Apr 21 22:09:08 CST 2019
     
142. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
     
143. [    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
     
144. [    0.000000] bootconsole [uart0] enabled
     
145. [    0.000000] hdmi init vic is -1
     
146. [    0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
     
147. [    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
     
148. [    0.000000] psci: probing for conduit method from DT.
     
149. [    0.000000] psci: PSCIv1.0 detected in firmware.
     
150. [    0.000000] psci: Using standard PSCI v0.2 function IDs
     
151. [    0.000000] psci: Trusted OS migration not required
     
152. [    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef5000 s45504 r8192 d32320 u86016
     
153. [    0.000000] Detected VIPT I-cache on CPU0
     
154. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
     
155. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 507912
     
156. [    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00010000@0x0002C000(recovery),0x00038000@0x0003C000(backup),0x00040000@0x00074000(cache),0x00300000@0x000B4000(system),0x00008000@0x003B4000(metadata),0x00002000@0x003BC000(baseparamer),-@0x003BE000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2019-04-22_21:09:02 hdmi.vic=-1 SecureBootCheckOk=0
     
157. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
     
158. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
     
159. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
     
160. [    0.000000] software IO TLB [mem 0x7eead000-0x7eeed000] (0MB) mapped at [ffffffc07eead000-ffffffc07eeecfff]
     
161. [    0.000000] Memory: 1982412K/2064384K available (11006K kernel code, 1640K rwdata, 5256K rodata, 832K init, 1073K bss, 65588K reserved, 16384K cma-reserved)
     
162. [    0.000000] Virtual kernel memory layout:
     
163. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
     
164. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
     
165. [    0.000000]       .init : 0xffffff8009070000 - 0xffffff8009140000   (   832 KB)
     
166. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008b40000   ( 11008 KB)
     
167. [    0.000000]     .rodata : 0xffffff8008b40000 - 0xffffff8009070000   (  5312 KB)
     
168. [    0.000000]       .data : 0xffffff8009140000 - 0xffffff80092da008   (  1641 KB)
     
169. [    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
     
170. [    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
     
171. [    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
     
172. [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
     
173. [    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
     
174. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
     
175. [    0.000000] Preemptible hierarchical RCU implementation.
     
176. [    0.000000]  Build-time adjustment of leaf fanout to 64.
     
177. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
     
178. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
     
179. [    0.000000] NR_IRQS:64 nr_irqs:64 0
     
180. [    0.000000] GIC: Using split EOI/Deactivate mode
     
181. [    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
     
182. [    0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
     
183. [    0.000000] ITS: using cache flushing for cmd queue
     
184. [    0.000000] GIC: using LPI property table @0x000000000a280000
     
185. [    0.000000] ITS: Allocated 1792 chunks for LPIs
     
186. [    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
     
187. [    0.000000] CPU0: using LPI pending table @0x000000000a290000
     
188. [    0.000000] GIC: using cache flushing for LPI property table
     
189. [    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
     
190. [    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
     
191. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
     
192. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
     
193. [    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
     
194. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
     
195. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
     
196. [    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
     
197. [    0.001986] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
     
198. [    0.002948] pid_max: default: 32768 minimum: 301
     
199. [    0.003464] Security Framework initialized
     
200. [    0.003853] SELinux:  Initializing.
     
201. [    0.004265] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
     
202. [    0.004894] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
     
203. [    0.006323] Initializing cgroup subsys freezer
     
204. [    0.006751] Initializing cgroup subsys debug
     
205. [    0.008070] sched-energy: Sched-energy-costs installed from DT
     
206. [    0.008620] CPU0: update cpu_capacity 401
     
207. [    0.009074] ASID allocator initialised with 65536 entries
     
208. [    0.025900] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
     
209. [    0.027200] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
     
210. [    0.039292] Detected VIPT I-cache on CPU1
     
211. [    0.039325] CPU1: found redistributor 1 region 0:0x00000000fef20000
     
212. [    0.039359] CPU1: using LPI pending table @0x000000000a3f0000
     
213. [    0.039402] CPU1: update cpu_capacity 401
     
214. [    0.039405] CPU1: Booted secondary processor [410fd034]
     
215. [    0.049286] Detected VIPT I-cache on CPU2
     
216. [    0.049305] CPU2: found redistributor 2 region 0:0x00000000fef40000
     
217. [    0.049338] CPU2: using LPI pending table @0x000000007c020000
     
218. [    0.049366] CPU2: update cpu_capacity 401
     
219. [    0.049369] CPU2: Booted secondary processor [410fd034]
     
220. [    0.059323] Detected VIPT I-cache on CPU3
     
221. [    0.059342] CPU3: found redistributor 3 region 0:0x00000000fef60000
     
222. [    0.059374] CPU3: using LPI pending table @0x000000007c060000
     
223. [    0.059401] CPU3: update cpu_capacity 401
     
224. [    0.059404] CPU3: Booted secondary processor [410fd034]
     
225. [    0.069373] Detected PIPT I-cache on CPU4
     
226. [    0.069402] CPU4: found redistributor 100 region 0:0x00000000fef80000
     
227. [    0.069441] CPU4: using LPI pending table @0x000000007c0a0000
     
228. [    0.069483] CPU4: update cpu_capacity 1024
     
229. [    0.069486] CPU4: Booted secondary processor [410fd082]
     
230. [    0.079396] Detected PIPT I-cache on CPU5
     
231. [    0.079414] CPU5: found redistributor 101 region 0:0x00000000fefa0000
     
232. [    0.079449] CPU5: using LPI pending table @0x000000007c0e0000
     
233. [    0.079476] CPU5: update cpu_capacity 1024
     
234. [    0.079479] CPU5: Booted secondary processor [410fd082]
     
235. [    0.079564] Brought up 6 CPUs
     
236. [    0.091666] SMP: Total of 6 processors activated.
     
237. [    0.092108] CPU features: detected feature: GIC system register CPU interface
     
238. [    0.092777] CPU: All CPU(s) started at EL2
     
239. [    0.093200] alternatives: patching kernel code
     
240. [    0.095287] devtmpfs: initialized
     
241. [    0.116455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
     
242. [    0.117416] futex hash table entries: 2048 (order: 5, 131072 bytes)
     
243. [    0.118743] pinctrl core: initialized pinctrl subsystem
     
244. [    0.120836] Failed to find legacy iommu devices
     
245. [    0.121650] NET: Registered protocol family 16
     
246. [    0.122438] schedtune: init normalization constants...
     
247. [    0.122959] schedtune: CLUSTER[0-3]      min_pwr:    56 max_pwr:   222
     
248. [    0.123593] schedtune: CPU[0]            min_pwr:     0 max_pwr:   222
     
249. [    0.124228] schedtune: CPU[1]            min_pwr:     0 max_pwr:   222
     
250. [    0.124862] schedtune: CPU[2]            min_pwr:     0 max_pwr:   222
     
251. [    0.125495] schedtune: CPU[3]            min_pwr:     0 max_pwr:   222
     
252. [    0.126130] schedtune: CLUSTER[4-5]      min_pwr:    65 max_pwr:  1108
     
253. [    0.126768] schedtune: CPU[4]            min_pwr:     0 max_pwr:  1108
     
254. [    0.127401] schedtune: CPU[5]            min_pwr:     0 max_pwr:  1108
     
255. [    0.128034] schedtune: SYSTEM            min_pwr:   121 max_pwr:  4434
     
256. [    0.128668] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
     
257. [    0.129408] schedtune: verify normalization constants...
     
258. [    0.129925] schedtune: max_pwr/2^0: 4313 => norm_pwr:  1024
     
259. [    0.130471] schedtune: max_pwr/2^1: 2156 => norm_pwr:   511
     
260. [    0.131012] schedtune: max_pwr/2^2: 1078 => norm_pwr:   255
     
261. [    0.131552] schedtune: max_pwr/2^3:  539 => norm_pwr:   127
     
262. [    0.132093] schedtune: max_pwr/2^4:  269 => norm_pwr:    63
     
263. [    0.132634] schedtune: max_pwr/2^5:  134 => norm_pwr:    31
     
264. [    0.133175] schedtune: configured to support 5 boost groups
     
265. [    0.143846] cpuidle: using governor ladder
     
266. [    0.153848] cpuidle: using governor menu
     
267. [    0.154241] Registered FIQ tty driver
     
268. [    0.154922] vdso: 2 pages (1 code @ ffffff8008b46000, 1 data @ ffffff8009144000)
     
269. [    0.155664] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
     
270. [    0.157747] DMA: preallocated 2048 KiB pool for atomic allocations
     
271. [    0.178796] console [pstore0] enabled
     
272. [    0.179388] pstore: Registered ramoops as persistent store backend
     
273. [    0.179992] ramoops: attached 0xf0000@0x110000, ecc: 0/0
     
274. [    0.182851] fiq debugger fiq mode enabled
     
275. [ [    0.183495] console [ttyFIQ0] enabled
     
276.    0.183495] console [ttyFIQ0] enabled
     
277. [[     0.184196] bootconsole [uart0] disabled
     
278.    0.184196] bootconsole [uart0] disabled
     
279. [    0.185105] Registered fiq debugger ttyFIQ0
     
280. [    0.215225] Rockchip hdmi driver version 2.0
     
281. .
     
282. [    0.217541] iommu: Adding device ff650000.vpu_service to group 0
     
283. [    0.217645] iommu: Adding device ff660000.rkvdec to group 1
     
284. [    0.217713] iommu: Adding device ff670000.iep to group 2
     
285. [    0.217813] iommu: Adding device ff8f0000.vop to group 3
     
286. [    0.217895] iommu: Adding device ff900000.vop to group 4
     
287. [    0.218006] iommu: Adding device ff910000.isp to group 5
     
288. [    0.218083] iommu: Adding device ff920000.isp to group 6
     
289. [    0.218763] rk_iommu ff670800.iommu: can't get aclk
     
290. [    0.218782] rk_iommu ff670800.iommu: can't get hclk
     
291. [    0.219661] SCSI subsystem initialized
     
292. [    0.219995] usbcore: registered new interface driver usbfs
     
293. [    0.220042] usbcore: registered new interface driver hub
     
294. [    0.220117] usbcore: registered new device driver usb
     
295. [    0.220506] media: Linux media interface: v0.10
     
296. [    0.220553] Linux video capture interface: v2.00
     
297. [    0.220689] pps_core: LinuxPPS API ver. 1 registered
     
298. [    0.220701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
     
299. [    0.220725] PTP clock support registered
     
300. [    0.222242] Advanced Linux Sound Architecture Driver Initialized.
     
301. [    0.222707] Bluetooth: Core ver 2.21
     
302. [    0.222756] NET: Registered protocol family 31
     
303. [    0.222768] Bluetooth: HCI device and connection manager initialized
     
304. [    0.222786] Bluetooth: HCI socket layer initialized
     
305. [    0.222801] Bluetooth: L2CAP socket layer initialized
     
306. [    0.222830] Bluetooth: SCO socket layer initialized
     
307. [    0.223856] rockchip-cpuinfo cpuinfo: Serial         : 9003721ebe94e80f
     
308. [    0.224354] clocksource: Switched to clocksource arch_sys_counter
     
309. [    0.268407] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
     
310. [    0.268648] NET: Registered protocol family 2
     
311. [    0.269068] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
     
312. [    0.269212] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
     
313. [    0.269489] TCP: Hash tables configured (established 16384 bind 16384)
     
314. [    0.269566] UDP hash table entries: 1024 (order: 3, 32768 bytes)
     
315. [    0.269629] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
     
316. [    0.269808] NET: Registered protocol family 1
     
317. [    0.270318] Trying to unpack rootfs image as initramfs...
     
318. [    0.610759] Freeing initrd memory: 7876K
     
319. [    0.611303] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
     
320. [    0.611394] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
     
321. [    0.614022] audit: initializing netlink subsys (disabled)
     
322. [    0.614096] audit: type=2000 audit(0.610:1): initialized
     
323. [    0.619100] VFS: Disk quotas dquot_6.6.0
     
324. [    0.619223] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
     
325. [    0.620591] fuse init (API version 7.23)
     
326. [    0.621713]
     
327. [    0.621713] TEE Core Framework initialization (ver 1:0.1)
     
328. [    0.621745] TEE armv7 Driver initialization
     
329. [    0.622117] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
     
330. [    0.622135] TEE core: Alloc the misc device "opteearmtz00" (id=0)
     
331. [    0.622333] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
     
332. [    0.626292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
     
333. [    0.626322] io scheduler noop registered
     
334. [    0.626495] io scheduler cfq registered (default)
     
335. [    0.627784] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
     
336. [    0.628848] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
     
337. [    0.634032] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
     
338. [    0.634059] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
     
339. [    0.634083] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
     
340. [    1.154449] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
     
341. [    1.155199] rockchip-pcie: probe of f8000000.pcie failed with error -110
     
342. [    1.156634] backlight supply power not found, using dummy regulator
     
343. [    1.157424] pwm-backlight backlight: invalid default brightness level: 200, using 105
     
344. [    1.158963] iep: failed to find iep power down clock source.
     
345. [    1.160013] IEP Power ON
     
346. [    1.160466] IEP Power OFF
     
347. [    1.160799] IEP Driver loaded succesfully
     
348. [    1.161444] Module initialized.
     
349. [    1.162074] rk-vcodec ff650000.vpu_service: probe device
     
350. [    1.162130] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07c301c10
     
351. [    1.162305] rk-vcodec ff650000.vpu_service: allocator is drm
     
352. [    1.162360] rk-vcodec ff650000.vpu_service: checking hw id 0
     
353. [    1.162849] rk-vcodec ff650000.vpu_service: init success
     
354. [    1.163442] rk-vcodec ff660000.rkvdec: probe device
     
355. [    1.163490] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07c302410
     
356. [    1.163620] rk-vcodec ff660000.rkvdec: allocator is drm
     
357. [    1.163675] rk-vcodec ff660000.rkvdec: checking hw id 6876
     
358. [    1.163987] rk-vcodec ff660000.rkvdec: init success
     
359. [    1.165713] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
     
360. [    1.165734] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
     
361. [    1.167051] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
     
362. [    1.167071] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
     
363. [    1.168730] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
     
364. [    1.170325] console [ttyS0] disabled
     
365. [    1.17038h180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
     
366. [    1.170970] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
     
367. [    1.171437] [drm:drm_core_init] Initialized drm 1.1.0 20060810
     
368. [    1.175417] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
     
369. [    1.175650] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
     
370. [    1.175681] rockchip-drm display-subsystem: failed to bind ff960000.dsi (ops dw_mipi_dsi_ops): -517
     
371. [    1.175940] rockchip-drm display-subsystem: master bind failed: -517
     
372. [    1.177481] ff960000.dsi.0 supply power not found, using dummy regulator
     
373. [    1.177743] panel-simple-dsi ff960000.dsi.0: panel_simple_dsi_parse_dcs_cmds: dcs_cmd=29 len=243, cmd_cnt=27
     
374. [    1.177763] panel-simple-dsi ff960000.dsi.0: panel_simple_dsi_parse_dcs_cmds: dcs_cmd=5 len=8, cmd_cnt=2
     
375. [    1.178186] mali ff9a0000.gpu: Failed to get regulator
     
376. [    1.178201] mali ff9a0000.gpu: Power control initialization failed
     
377. [    1.178513] Unable to detect cache hierarchy from DT for CPU 0
     
378. [    1.190093] brd: module loaded
     
379. [    1.194805] loop: module loaded
     
380. [    1.195329] zram: Added device: zram0
     
381. [    1.195932] SCSI Media Changer driver v0.25
     
382. [    1.197237] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
     
383. [    1.197260] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
     
384. [    1.198095] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max
     
385. [    1.368440] wk2xxx_serial_init()
     
386. [    1.368456] wk2xxx_request_port
     
387. [    1.368470] ttysWK0 at I/O 0x1 (irq = 105, base_baud = 460800) is a wk2xxx
     
388. [    1.368730] uart_add_one_port success for line i:= 0 with right 0
     
389. [    1.368743] wk2xxx_request_port
     
390. [    1.368755] ttysWK1 at I/O 0x2 (irq = 105, base_baud = 460800) is a wk2xxx
     
391. [    1.368946] uart_add_one_port success for line i:= 1 with right 0
     
392. [    1.368959] wk2xxx_request_port
     
393. [    1.368971] ttysWK2 at I/O 0x3 (irq = 105, base_baud = 460800) is a wk2xxx
     
394. [    1.369157] uart_add_one_port success for line i:= 2 with right 0
     
395. [    1.369170] wk2xxx_request_port
     
396. [    1.369181] ttysWK3 at I/O 0x4 (irq = 105, base_baud = 460800) is a wk2xxx
     
397. [    1.369364] uart_add_one_port success for line i:= 3 with right 0
     
398. [    1.369376] uart_add_one_port = 0x0
     
399. [    1.369403] register spi return v = :0
     
400. [    1.369455] tun: Universal TUN/TAP device driver, 1.6
     
401. [    1.369466] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
     
402. [    1.370376] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
     
403. [    1.370469] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
     
404. [    1.370489] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
     
405. [    1.370503] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
     
406. [    1.370530] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
     
407. [    1.370703] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
     
408. [    1.375723] rk_gmac-dwmac fe300000.ethernet: init for RGMII
     
409. [    1.375851] stmmac - user ID: 0x10, Synopsys ID: 0x35
     
410. [    1.375862]  Ring mode enabled
     
411. [    1.375871]  DMA HW capability register supported
     
412. [    1.375881]  Normal descriptors
     
413. [    1.375892]  RX Checksum Offload Engine supported (type 2)
     
414. [    1.375902]  Wake-Up On Lan supported
     
415. [    1.375942]  Enable RX Mitigation via HW Watchdog Timer
     
416. [    1.448821] libphy: stmmac: probed
     
417. [    1.448864] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
     
418. [    1.448883] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
     
419. [    1.448901] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
     
420. [    1.448918] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
     
421. [    1.448933] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
     
422. [    1.448946] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
     
423. [    1.448958] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
     
424. [    1.448971] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
     
425. [    1.448982] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
     
426. [    1.448994] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
     
427. [    1.449006] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
     
428. [    1.449018] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
     
429. [    1.449030] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
     
430. [    1.449041] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
     
431. [    1.449053] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
     
432. [    1.449064] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
     
433. [    1.449076] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
     
434. [    1.449087] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
     
435. [    1.449099] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
     
436. [    1.449111] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
     
437. [    1.449122] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
     
438. [    1.449134] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
     
439. [    1.449146] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
     
440. [    1.449158] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
     
441. [    1.449169] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
     
442. [    1.449181] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
     
443. [    1.449193] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
     
444. [    1.449205] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
     
445. [    1.449217] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
     
446. [    1.449228] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
     
447. [    1.449241] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
     
448. [    1.449253] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
     
449. [    1.450125] PPP generic driver version 2.4.2
     
450. [    1.450333] PPP BSD Compression module registered
     
451. [    1.450348] PPP Deflate Compression module registered
     
452. [    1.450382] PPP MPPE Compression module registered
     
453. [    1.450400] NET: Registered protocol family 24
     
454. [    1.450439] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
     
455. [    1.450453] CSLIP: code copyright 1989 Regents of the University of California.
     
456. [    1.450524] usbcore: registered new interface driver mt7601u
     
457. [    1.450547] Rockchip WiFi SYS interface (V1.00) ...
     
458. [    1.450608] usbcore: registered new interface driver catc
     
459. [    1.450650] usbcore: registered new interface driver kaweth
     
460. [    1.450666] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
     
461. [    1.450705] usbcore: registered new interface driver pegasus
     
462. [    1.450747] usbcore: registered new interface driver rtl8150
     
463. [    1.450792] usbcore: registered new interface driver r8152
     
464. [    1.450807] hso: drivers/net/usb/hso.c: Option Wireless
     
465. [    1.450868] usbcore: registered new interface driver hso
     
466. [    1.450915] usbcore: registered new interface driver asix
     
467. [    1.450956] usbcore: registered new interface driver ax88179_178a
     
468. [    1.450998] usbcore: registered new interface driver cdc_ether
     
469. [    1.451069] usbcore: registered new interface driver cdc_eem
     
470. [    1.451111] usbcore: registered new interface driver dm9601
     
471. [    1.451165] usbcore: registered new interface driver smsc75xx
     
472. [    1.451214] usbcore: registered new interface driver smsc95xx
     
473. [    1.451264] usbcore: registered new interface driver gl620a
     
474. [    1.451307] usbcore: registered new interface driver net1080
     
475. [    1.451348] usbcore: registered new interface driver plusb
     
476. [    1.451389] usbcore: registered new interface driver rndis_host
     
477. [    1.451432] usbcore: registered new interface driver cdc_subset
     
478. [    1.451473] usbcore: registered new interface driver zaurus
     
479. [    1.451519] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
     
480. [    1.451577] usbcore: registered new interface driver int51x1
     
481. [    1.451620] usbcore: registered new interface driver kalmia
     
482. [    1.451662] usbcore: registered new interface driver ipheth
     
483. [    1.451707] usbcore: registered new interface driver sierra_net
     
484. [    1.451753] usbcore: registered new interface driver cx82310_eth
     
485. [    1.451804] usbcore: registered new interface driver cdc_ncm
     
486. [    1.451845] usbcore: registered new interface driver qmi_wwan
     
487. [    1.451888] usbcore: registered new interface driver cdc_mbim
     
488. [    1.457556] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd
     
489. [    1.465510] rockchip-typec-phy ff800000.phy: Needed 1 loops to turn on
     
490. [    1.465737] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
     
491. [    1.466407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
     
492. [    1.466425] ehci-pci: EHCI PCI platform driver
     
493. [    1.466485] ehci-platform: EHCI generic platform driver
     
494. [    1.470134] ehci-platform fe380000.usb: EHCI Host Controller
     
495. [    1.470166] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
     
496. [    1.470338] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
     
497. [    1.477704] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
     
498. [    1.477843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
     
499. [    1.477860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
500. [    1.477874] usb usb1: Product: EHCI Host Controller
     
501. [    1.477887] usb usb1: Manufacturer: Linux 4.4.103 ehci_hcd
     
502. [    1.477899] usb usb1: SerialNumber: fe380000.usb
     
503. [    1.478565] hub 1-0:1.0: USB hub found
     
504. [    1.478616] hub 1-0:1.0: 1 port detected
     
505. [    1.482694] ehci-platform fe3c0000.usb: EHCI Host Controller
     
506. [    1.482727] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
     
507. [    1.482895] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
     
508. [    1.491067] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
     
509. [    1.491249] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
     
510. [    1.491266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
511. [    1.491281] usb usb2: Product: EHCI Host Controller
     
512. [    1.491293] usb usb2: Manufacturer: Linux 4.4.103 ehci_hcd
     
513. [    1.491306] usb usb2: SerialNumber: fe3c0000.usb
     
514. [    1.491888] hub 2-0:1.0: USB hub found
     
515. [    1.491928] hub 2-0:1.0: 1 port detected
     
516. [    1.492761] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
     
517. [    1.492799] ohci-platform: OHCI generic platform driver
     
518. [    1.493222] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
     
519. [    1.493254] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
     
520. [    1.493482] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
     
521. [    1.548560] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
     
522. [    1.548588] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
523. [    1.548605] usb usb3: Product: Generic Platform OHCI controller
     
524. [    1.548619] usb usb3: Manufacturer: Linux 4.4.103 ohci_hcd
     
525. [    1.548633] usb usb3: SerialNumber: fe3a0000.usb
     
526. [    1.549228] hub 3-0:1.0: USB hub found
     
527. [    1.549274] hub 3-0:1.0: 1 port detected
     
528. [    1.549959] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
     
529. [    1.549991] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
     
530. [    1.550158] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
     
531. [    1.605208] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
     
532. [    1.605248] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
533. [    1.605264] usb usb4: Product: Generic Platform OHCI controller
     
534. [    1.605279] usb usb4: Manufacturer: Linux 4.4.103 ohci_hcd
     
535. [    1.605294] usb usb4: SerialNumber: fe3e0000.usb
     
536. [    1.605894] hub 4-0:1.0: USB hub found
     
537. [    1.605934] hub 4-0:1.0: 1 port detected
     
538. [    1.607323] usbcore: registered new interface driver cdc_acm
     
539. [    1.607337] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
     
540. [    1.607421] usbcore: registered new interface driver usblp
     
541. [    1.607486] usbcore: registered new interface driver cdc_wdm
     
542. [    1.607552] usbcore: registered new interface driver uas
     
543. [    1.607713] usbcore: registered new interface driver usb-storage
     
544. [    1.607772] usbcore: registered new interface driver ums-alauda
     
545. [    1.607835] usbcore: registered new interface driver ums-cypress
     
546. [    1.607894] usbcore: registered new interface driver ums-datafab
     
547. [    1.607950] usbcore: registered new interface driver ums_eneub6250
     
548. [    1.608005] usbcore: registered new interface driver ums-freecom
     
549. [    1.608063] usbcore: registered new interface driver ums-isd200
     
550. [    1.608119] usbcore: registered new interface driver ums-jumpshot
     
551. [    1.608175] usbcore: registered new interface driver ums-karma
     
552. [    1.608234] usbcore: registered new interface driver ums-onetouch
     
553. [    1.608296] usbcore: registered new interface driver ums-sddr09
     
554. [    1.608354] usbcore: registered new interface driver ums-sddr55
     
555. [    1.608412] usbcore: registered new interface driver ums-usbat
     
556. [    1.608522] usbcore: registered new interface driver usbserial
     
557. [    1.608573] usbcore: registered new interface driver usbserial_generic
     
558. [    1.608613] usbserial: USB Serial support registered for generic
     
559. [    1.608674] usbcore: registered new interface driver ch341
     
560. [    1.608716] usbserial: USB Serial support registered for ch341-uart
     
561. [    1.608777] usbcore: registered new interface driver cp210x
     
562. [    1.608815] usbserial: USB Serial support registered for cp210x
     
563. [    1.608902] usbcore: registered new interface driver option
     
564. [    1.608940] usbserial: USB Serial support registered for GSM modem (1-port)
     
565. [    1.609213] usbcore: registered new interface driver pl2303
     
566. [    1.609253] usbserial: USB Serial support registered for pl2303
     
567. [    1.609332] usbcore: registered new interface driver trancevibrator
     
568. [    1.609349] usb20_otg: version 3.10a 21-DEC-2012
     
569. [    1.609644] usb20_host: version 3.10a 21-DEC-2012
     
570. [    1.610320] usbcore: registered new interface driver xpad
     
571. [    1.610387] usbcore: registered new interface driver usb_acecad
     
572. [    1.610459] usbcore: registered new interface driver aiptek
     
573. [    1.610524] usbcore: registered new interface driver gtco
     
574. [    1.610589] usbcore: registered new interface driver hanwang
     
575. [    1.610651] usbcore: registered new interface driver kbtab
     
576. [    1.610668] ==gsl_ts_init==
     
577. [    1.610708] ret=0
     
578. [    1.611418] .. rk pwm remotectl v1.1 init
     
579. [    1.611737] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
     
580. [    1.612361] sensor_register_slave:mma8452,id=17
     
581. [    1.612380] sensor_register_slave:lis3dh,id=7
     
582. [    1.612397] sensor_register_slave:mma7660,id=18
     
583. [    1.612414] sensor_register_slave:lsm303d,id=22
     
584. [    1.612430] sensor_register_slave:gs_mc3230,id=23
     
585. [    1.612439] [Gsensor]   gsensor_init
     
586. [    1.612455] sensor_register_slave:mpu6880_acc,id=24
     
587. [    1.612473] sensor_register_slave:mpu6500_acc,id=25
     
588. [    1.612489] sensor_register_slave:lsm330_acc,id=26
     
589. [    1.612506] sensor_register_slave:akm8975,id=29
     
590. [    1.612523] sensor_register_slave:akm8963,id=30
     
591. [    1.612539] sensor_register_slave:l3g4200d,id=44
     
592. [    1.612555] sensor_register_slave:l3g20d,id=45
     
593. [    1.612572] sensor_register_slave:ewtsa,id=46
     
594. [    1.612588] sensor_register_slave:lsm330_gyro,id=50
     
595. [    1.612604] sensor_register_slave:cm3217,id=52
     
596. [    1.612621] sensor_register_slave:cm3218,id=53
     
597. [    1.613565] i2c /dev entries driver
     
598. [    1.615111] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
     
599. [    1.615229] fan53555-reg: supplied by vcc5v0_sys
     
600. [    1.617291] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
     
601. [    1.617366] fan53555-reg: supplied by vcc5v0_sys
     
602. [    1.619620] rk808 0-001b: Pmic Chip id: 0x0
     
603. [    1.623501] rk808-regulator rk808-regulator: there is no dvs0 gpio
     
604. [    1.623577] rk808-regulator rk808-regulator: there is no dvs1 gpio
     
605. [    1.623705] DCDC_REG1: supplied by vcc3v3_sys
     
606. [    1.624591] DCDC_REG2: supplied by vcc3v3_sys
     
607. [    1.625215] DCDC_REG3: supplied by vcc3v3_sys
     
608. [    1.625488] DCDC_REG4: supplied by vcc3v3_sys
     
609. [    1.625994] LDO_REG1: supplied by vcc3v3_sys
     
610. [    1.627174] LDO_REG2: supplied by vcc3v3_sys
     
611. [    1.628194] LDO_REG3: supplied by vcc3v3_sys
     
612. [    1.629237] LDO_REG4: supplied by vcc3v3_sys
     
613. [    1.630244] LDO_REG5: supplied by vcc3v3_sys
     
614. [    1.631281] LDO_REG6: supplied by vcc3v3_sys
     
615. [    1.632278] LDO_REG7: supplied by vcc3v3_sys
     
616. [    1.633312] LDO_REG8: supplied by vcc3v3_sys
     
617. [    1.634295] SWITCH_REG1: supplied by vcc3v3_sys
     
618. [    1.634605] SWITCH_REG2: supplied by vcc3v3_sys
     
619. [    1.638426] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
     
620. [    1.639048] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009942000
     
621. [    1.639951] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009944000
     
622. [    1.640078] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
     
623. [    1.640096] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
     
624. [    1.640112] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xfer  on device rockchip-pinctrl
     
625. [    1.640127] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
     
626. [    1.640580] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff8009946000
     
627. [    1.641420] GSLX680 Enter gsl_ts_probe
     
628. [    1.797704] usb 2-1: new high-speed USB device number 2 using ehci-platform
     
629. [    1.921696] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
     
630. [    1.921736] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
     
631. [    1.921757] usb 2-1: Product: USB 2.0 Hub [MTT]
     
632. [    1.922314] hub 2-1:1.0: USB hub found
     
633. [    1.922444] hub 2-1:1.0: 7 ports detected
     
634. [    1.951046] gsl_ts_probe--1305, i2c_master_recv fail
     
635. [    1.951123] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009948000
     
636. [    1.952362] IR NEC protocol handler initialized
     
637. [    1.952402] IR RC5(x/sz) protocol handler initialized
     
638. [    1.952420] IR RC6 protocol handler initialized
     
639. [    1.952436] IR JVC protocol handler initialized
     
640. [    1.952452] IR Sony protocol handler initialized
     
641. [    1.952465] IR SANYO protocol handler initialized
     
642. [    1.952479] IR Sharp protocol handler initialized
     
643. [    1.952493] IR MCE Keyboard/mouse protocol handler initialized
     
644. [    1.952508] IR XMP protocol handler initialized
     
645. [    1.952823] usbcore: registered new interface driver uvcvideo
     
646. [    1.952834] USB Video Class driver (1.1.1)
     
647. [    1.952854] CamSys driver version: v0.38.0, CamSys head file version: v1.0.0
     
648. [    1.958789] __power_supply_register: Expected proper parent device for 'test_ac'
     
649. [    1.959008] __power_supply_register: Expected proper parent device for 'test_battery'
     
650. [    1.959324] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
     
651. [    1.959448] __power_supply_register: Expected proper parent device for 'test_usb'
     
652. [    1.962778] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
     
653. [    1.964206] device-mapper: uevent: version 1.0.3
     
654. [    1.964642] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
     
655. [    1.964894] Bluetooth: HCI UART driver ver 2.3
     
656. [    1.964909] Bluetooth: HCI UART protocol H4 registered
     
657. [    1.964919] Bluetooth: HCI UART protocol LL registered
     
658. [    1.964935] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
     
659. [    1.964945] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
     
660. [    1.964955] rtk_btusb: Register usb char device interface for BT driver
     
661. [    1.965241] usbcore: registered new interface driver rtk_btusb
     
662. [    1.965817] cpu cpu0: leakage=19
     
663. [    1.983472] cpu cpu0: temp=46250, pvtm=147784 (147454 + 330)
     
664. [    1.983894] cpu cpu0: pvtm-sel=1
     
665. [    1.984313] cpu cpu4: leakage=36
     
666. [    1.996540] cpu cpu4: temp=46250, pvtm=154617 (154442 + 175)
     
667. [    1.996695] cpu cpu4: pvtm-sel=1
     
668. [    2.002280] sdhci: Secure Digital Host Controller Interface driver
     
669. [    2.002329] sdhci: Copyright(c) Pierre Ossman
     
670. [    2.002350] Synopsys Designware Multimedia Card Interface Driver
     
671. [    2.003578] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
     
672. [    2.003736] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
     
673. [    2.003758] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
     
674. [    2.003819] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
     
675. [    2.003847] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
     
676. [    2.003902] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
     
677. [    2.003915] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
     
678. [    2.005022] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
     
679. [    2.005149] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
     
680. [    2.005169] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
     
681. [    2.005220] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
     
682. [    2.005246] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
     
683. [    2.005362] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
     
684. [    2.006271] sdhci-pltfm: SDHCI platform and OF driver helper
     
685. [    2.008220] sdhci-arasan fe330000.sdhci: No vmmc regulator found
     
686. [    2.008236] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
     
687. [    2.034479] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
     
688. [    2.036638] hidraw: raw HID events driver (C) Jiri Kosina
     
689. [    2.041304] usbcore: registered new interface driver usbhid
     
690. [    2.041322] usbhid: USB HID core driver
     
691. [    2.041483] inv_mpu_iio: inv_mpu_init:746
     
692. [    2.042050] ashmem: initialized
     
693. [    2.044717] ff100000.saradc supply vref not found, using dummy regulator
     
694. [    2.050487] rknandbase v1.1 2016-11-08
     
695. [    2.051160] usbcore: registered new interface driver snd-usb-audio
     
696. [    2.052546] rt5640 1-001c: Can not read property hp-con-gpio
     
697. [    2.052590] rt5640 1-001c: Can not read property: linein-mute.
     
698. [    2.065202] lkd tc358749x_parse_dts: power(1)
     
699. [    2.065301] lkd tc358749x_parse_dts: int(0)
     
700. [    2.065389] lkd tc358749x_parse_dts: reset(1)
     
701. [    2.075878] mmc0: MAN_BKOPS_EN bit is not set
     
702. [    2.076457] tc358749x 1-000f: tc358749x_parse_dts success
     
703. [    2.076627] tc358749x 1-000f: tc358749x_i2c_probe success
     
704. [    2.082249] u32 classifier
     
705. [    2.082283]     Actions configured
     
706. [    2.082353] Netfilter messages via NETLINK v0.30.
     
707. [    2.082439] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
     
708. [    2.082931] ctnetlink v0.93: registering with nfnetlink.
     
709. [    2.083805] xt_time: kernel timezone is -0000
     
710. [    2.084676] ip_tables: (C) 2000-2006 Netfilter Core Team
     
711. [    2.084865] arp_tables: (C) 2002 David S. Miller
     
712. [    2.085284] Initializing XFRM netlink socket
     
713. [    2.085730] NET: Registered protocol family 10
     
714. [    2.086700] mip6: Mobile IPv6
     
715. [    2.086736] ip6_tables: (C) 2000-2006 Netfilter Core Team
     
716. [    2.087883] sit: IPv6 over IPv4 tunneling driver
     
717. [    2.088351] NET: Registered protocol family 17
     
718. [    2.088382] NET: Registered protocol family 15
     
719. [    2.088422] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
     
720. [    2.088658] mmc0: new HS400 Enhanced strobe MMC card at address 0001
     
721. [    2.089076] Bridge firewalling registered
     
722. [    2.089096] Ebtables v2.0 registered
     
723. [    2.089219] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
     
724. [    2.089389] Bluetooth: RFCOMM TTY layer initialized
     
725. [    2.089412] Bluetooth: RFCOMM socket layer initialized
     
726. [    2.089438] Bluetooth: RFCOMM ver 1.11
     
727. [    2.089464] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
     
728. [    2.089475] Bluetooth: BNEP filters: protocol multicast
     
729. [    2.089491] Bluetooth: BNEP socket layer initialized
     
730. [    2.089509] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
     
731. [    2.089524] Bluetooth: HIDP socket layer initialized
     
732. [    2.089542] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB
     
733. [    2.089561] l2tp_core: L2TP core driver, V2.0
     
734. [    2.089584] l2tp_ppp: PPPoL2TP kernel driver, V2.0
     
735. [    2.089613] [WLAN_RFKILL]: Enter rfkill_wlan_init
     
736. [    2.089831] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB
     
737. [    2.089912] [WLAN_RFKILL]: Enter rfkill_wlan_probe
     
738. [    2.089969] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
     
739. [    2.089981] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
     
740. [    2.089994] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
     
741. [    2.090071] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
     
742. [    2.090085] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
     
743. [    2.090098] [WLAN_RFKILL]: Exit rfkill_wlan_probe
     
744. [    2.090119] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB
     
745. [    2.090156] [BT_RFKILL]: Enter rfkill_rk_init
     
746. [    2.090535] rkpart: partition size too small (0)
     
747. [    2.090557]  parameter: 0x000000000 -- 0x000400000 (4 MB)
     
748. [    2.090571]      uboot: 0x000400000 -- 0x000800000 (4 MB)
     
749. [    2.090584]      trust: 0x000800000 -- 0x000c00000 (4 MB)
     
750. [    2.090600] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
     
751. [    2.090617]       misc: 0x000c00000 -- 0x001000000 (4 MB)
     
752. [    2.090630] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
     
753. [    2.090644]   resource: 0x001000000 -- 0x002000000 (16 MB)
     
754. [    2.090652] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
     
755. [    2.090673]     kernel: 0x002000000 -- 0x003800000 (24 MB)
     
756. [    2.090678]      800000 -- 0x005800000 (32 MB)
     
757. [    2.090683]   recovery: 0x005800000 -- 0x007800000 (32 MB)
     
758. [    2.090687]     backup: 0x007800000 -- 0x00e800000 (112 MB)
     
759. [    2.090691]      cache: 0x00e800000 -- 0x016800000 (128 MB)
     
760. [    2.090694]     system: 0x016800000 -- 0x076800000 (1536 MB)
     
761. [    2.090699]   metadata: 0x076800000 -- 0x077800000 (16 MB)
     
762. [    2.090702] baseparamer: 0x077800000 -- 0x077c00000 (4 MB)
     
763. [    2.090706]   userdata: 0x077c00000 -- 0x3a3a00000 (12990 MB)
     
764. [    2.090750] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
     
765. [    2.091358]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
     
766. [    2.091359] [BT_RFKILL]: Request irq for bt wakeup host
     
767. [    2.091413] [BT_RFKILL]: BT_WAKE_HOST IRQ fired
     
768. [    2.091440] [BT_RFKILL]: ** disable irq
     
769. [    2.091696] [BT_RFKILL]: bt_default device registered.
     
770. [    2.091985] sensor_register_slave:mpu6880_gyro,id=49
     
771. [    2.093785] Registered cp15_barrier emulation handler
     
772. [    2.093874] vendor storage:20160801 ret = 0
     
773. [    2.093881] Registered setend emulation handler
     
774. [    2.094692] registered taskstats version 1
     
775. [    2.095705] rockchip ion idev is NULL
     
776. [    2.095725] rga2 ff680000.rga: rga ion client create success!
     
777. [    2.095939] rga: Driver loaded successfully ver:3.02
     
778. [    2.097741] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
     
779. [    2.098031] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
     
780. [    2.098113] rockchip-drm display-subsystem: bound ff960000.dsi (ops dw_mipi_dsi_ops)
     
781. [    2.098652] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
     
782. [    2.098693] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
     
783. [    2.098786] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
     
784. [    2.103228] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
     
785. [    2.103250] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
     
786. [    2.103265] [drm:drm_vblank_init] No driver support for vblank timestamp query.
     
787. [    2.140456] rockchip-drm display-subsystem: fb0:  frame buffer device
     
788. [    2.154031] mali ff9a0000.gpu: leakage=25
     
789. [    2.167173] mali ff9a0000.gpu: temp=46875, pvtm=122757 (122697 + 60)
     
790. [    2.168694] mali ff9a0000.gpu: pvtm-sel=1
     
791. [    2.170032] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
     
792. [    2.171537] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 284; [Func] : kbase_devfreq_init(); success initing power_model_simple.
     
793. [    2.172240] mali ff9a0000.gpu: Probed as mali0
     
794. [    2.177871] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
     
795. [    2.177913] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
     
796. [    2.178137] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
     
797. [    2.178181] xhci-hcd xhci-hcd.9.auto: irq 236, io mem 0xfe800000
     
798. [    2.178296] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
     
799. [    2.178312] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
800. [    2.178324] usb usb5: Product: xHCI Host Controller
     
801. [    2.178335] usb usb5: Manufacturer: Linux 4.4.103 xhci-hcd
     
802. [    2.178345] usb usb5: SerialNumber: xhci-hcd.9.auto
     
803. [    2.178817] hub 5-0:1.0: USB hub found
     
804. [    2.178846] hub 5-0:1.0: 1 port detected
     
805. [    2.179063] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
     
806. [    2.179080] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
     
807. [    2.179134] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
     
808. [    2.179212] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
     
809. [    2.179225] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
810. [    2.179237] usb usb6: Product: xHCI Host Controller
     
811. [    2.179247] usb usb6: Manufacturer: Linux 4.4.103 xhci-hcd
     
812. [    2.179257] usb usb6: SerialNumber: xhci-hcd.9.auto
     
813. [    2.179618] hub 6-0:1.0: USB hub found
     
814. [    2.179644] hub 6-0:1.0: 1 port detected
     
815. [    2.180727] xhci-hcd xhci-hcd.9.auto: remove, state 1
     
816. [    2.180750] usb usb6: USB disconnect, device number 1
     
817. [    2.204530] xhci-hcd xhci-hcd.9.auto: Host not halted after 16000 microseconds.
     
818. [    2.204564] xhci-hcd xhci-hcd.9.auto: Host controller not halted, aborting reset.
     
819. [    2.204602] xhci-hcd xhci-hcd.9.auto: USB bus 6 deregistered
     
820. [    2.204616] xhci-hcd xhci-hcd.9.auto: remove, state 1
     
821. [    2.204634] usb usb5: USB disconnect, device number 1
     
822. [    2.205056] xhci-hcd xhci-hcd.9.auto: USB bus 5 deregistered
     
823. [    2.209244] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
     
824. [    2.209284] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5
     
825. [    2.209480] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
     
826. [    2.209518] xhci-hcd xhci-hcd.10.auto: irq 237, io mem 0xfe900000
     
827. [    2.209625] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
     
828. [    2.209637] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
829. [    2.209647] usb usb5: Product: xHCI Host Controller
     
830. [    2.209656] usb usb5: Manufacturer: Linux 4.4.103 xhci-hcd
     
831. [    2.209665] usb usb5: SerialNumber: xhci-hcd.10.auto
     
832. [    2.210075] hub 5-0:1.0: USB hub found
     
833. [    2.210099] hub 5-0:1.0: 1 port detected
     
834. [    2.210276] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
     
835. [    2.210291] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6
     
836. [    2.210336] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
     
837. [    2.210401] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
     
838. [    2.210412] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
839. [    2.210422] usb usb6: Product: xHCI Host Controller
     
840. [    2.210430] usb usb6: Manufacturer: Linux 4.4.103 xhci-hcd
     
841. [    2.210439] usb usb6: SerialNumber: xhci-hcd.10.auto
     
842. [    2.210734] hub 6-0:1.0: USB hub found
     
843. [    2.210757] hub 6-0:1.0: 1 port detected
     
844. [    2.211588] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
     
845. [    2.211671] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
     
846. [    2.211688] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
     
847. [    2.211713] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
     
848. [    2.211734] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
     
849. [    2.211772] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
     
850. [    2.211781] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
     
851. [    2.211997] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
     
852. [    2.224404] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
     
853. [    2.237761] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
     
854. [    2.238445] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
     
855. [    2.238521] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
     
856. [    2.238537] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
     
857. [    2.238562] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
     
858. [    2.238581] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
     
859. [    2.238650] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
     
860. [    2.238936] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq
     
861. [    2.239041] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
     
862. [    2.239450] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
     
863. [    2.251214] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
     
864. [    2.264497] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
     
865. [    2.265758] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
     
866. [    2.281228] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
     
867. [    2.282754] asoc-simple-card rt5640-sound: rt5640-aif2 <-> ff890000.i2s mapping ok
     
868. [    2.283484] asoc-simple-card rt5640-sound: tc358749x-audio <-> ff890000.i2s mapping ok
     
869. [    2.284072] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
     
870. [    2.285757] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
     
871. [    2.287452] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
     
872. [    2.289891] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1
     
873. [    2.290486] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
     
874. [    2.293067] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
     
875. [    2.295305] otg_wakelock_init: No USB transceiver found
     
876. [    2.296802] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:03 UTC (1358499003)
     
877. [    2.298291] It doesn't contain Rogue gpu
     
878. u
        2.329230]
     
879. [    2.349981] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)

复制代码

黄鑫荣

沙发自抢，求大神解答！！！