RK3588S 官方UBoot No ethernet found

Joeyqiu

在Uboot当中找不到网卡，加载内核进入系统后正常。

eth1addr=02:ae:5b:0e:ad:13
ethaddr=fe:ae:5b:0e:ad:13


eth1的MAC地址与进入Linux系统后的mac地址相同，设备树中的gmac的status也同样改成了okay。
在使用主线uboot的时候可以检测到网卡但是无法使用，报错EQOS_DMA_MODE_SWR stuckFAILED: -110

firefly提供的sdk中的uboot与rockchip的官方uboot均无法找到网卡，感觉可能和
Failed to load DTB, ret=-2
No valid DTB, ret=-22
Failed to get kernel dtb, ret=-22
这个报错有关，有大佬能帮忙看看吗

Joeyqiu

U-Boot 2017.09-g63c55618fb-240223-dirty #qiujingyi (Mar 06 2024 - 14:02:09 +0800)



Model: Rockchip RK3588 Evaluation Board

MPIDR: 0x81000000

PreSerial: 2, raw, 0xfeb50000

DRAM:  8 GiB

Sysmem: init

Relocation Offset: eda1f000

Relocation fdt: eb9f9b40 - eb9fecd8

CR: M/C/I

Using default environment



optee api revision: 2.0

mmc@fe2c0000: 1, mmc@fe2e0000: 0

Bootdev(atags): mmc 0

MMC0: HS400 Enhanced Strobe, 200Mhz

PartType: EFI

TEEC: Waring: Could not find security partition

DM: v2

boot mode: None

Failed to load DTB, ret=-2

No valid DTB, ret=-22

Failed to get kernel dtb, ret=-22

Model: Rockchip RK3588 Evaluation Board

MPIDR: 0x81000000

rockchip_set_serialno: could not find efuse/otp device

Minidump: init...

CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)

  b0pll 24000 KHz

  b1pll 24000 KHz

  lpll 24000 KHz

  v0pll 24000 KHz

  aupll 24000 KHz

  cpll 1500000 KHz

  gpll 1188000 KHz

  npll 24000 KHz

  ppll 100000 KHz

  aclk_center_root 702000 KHz

  pclk_center_root 100000 KHz

  hclk_center_root 396000 KHz

  aclk_center_low_root 500000 KHz

  aclk_top_root 750000 KHz

  pclk_top_root 100000 KHz

  aclk_low_top_root 396000 KHz

Net:   No ethernet found.

uboot 启动log如上所示