Firefly开源社区

急急急,RK3288使用USB麦克风进行通话没声音

回帖奖励 1 灯泡 回复本帖可获得 1 灯泡奖励! 每人限 6 次

198

积分

0

威望

0

贡献

技术小白

积分
198
发表于 2018-1-23 14:44:10     
   各位社区大神帮帮忙,小弟最近做一个RK3288使用USB麦克风进行语音通话的任务,使用的是Skype网络电话,拨打电话的时候RK3288能听得到对方声音,但是对方不能听到RK3288这边的声音,只是一堆杂音,使用QQ电话测试双方通话正常,但是使用QQ视屏通话又出现对方不能听到RK3288声音现象,出现的是一堆杂音,RK3288可以正常听到对方声音,现在毫无思路该怎么修改,我的这款USB麦克风的采样率为16Kbit,修改采样率为16000无效,usb麦克风可以生成设备节点,现在是又急又没有头绪,还请各位大神帮帮忙。
设备节点.png
采样率.png

回复

使用道具 举报

198

积分

0

威望

0

贡献

技术小白

积分
198
发表于 2018-1-23 14:50:30     
忘记贴上开机内核的打印信息了
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
<6>[    0.000000] Booting Linux on physical CPU 0x500
<6>[    0.000000] Initializing cgroup subsys cpu
<6>[    0.000000] Initializing cgroup subsys cpuacct
<5>[    0.000000] Linux version 3.10.0 (youyou@youyou-Vostro-3900) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #47 SMP PREEMPT Mon Jan 22 22:02:49 CST 2018
<4>[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
<6>[    0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x7dc00000, offset:0x01000000
<6>[    0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x7dc00000 for uboot logo
<4>[    0.000000] rockchip_ion_reserve
<6>[    0.000000] ion heap(drm): base(0) size(0) align(0)
<6>[    0.000000] ion heap(cma): base(0) size(28000000) align(0)
<6>[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
<6>[    0.000000] cma: CMA: reserved 640 MiB at 55c00000
<6>[    0.000000] ion_reserve: cma reserved base 55c00000 size 671088640
<6>[    0.000000] cma: CMA: reserved 16 MiB at 1f000000
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 524288
<7>[    0.000000] free_area_init_node: node 0, pgdat c0cc9500, node_mem_map c0df2000
<7>[    0.000000]   Normal zone: 1024 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 3072 pages used for memmap
<7>[    0.000000]   HighMem zone: 393216 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 9 pages/cpu @c1e46000 s13376 r8192 d15296 u36864
<7>[    0.000000] pcpu-alloc: s13376 r8192 d15296 u36864 alloc=9*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523264
<5>[    0.000000] Kernel command line: vmalloc=496M console=ttyFIQ0 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00300000@0x00092000(system),0x00008000@0x00392000(metadata),0x00200000@0x0039A000(userdata),0x00020000@0x0059A000(radical_update),-@0x005BA000(user) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000:0x01000000 loader.timestamp=2018-01-18_20:47:51
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] allocated 4194304 bytes of page_cgroup
<6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>[    0.000000] Memory: 2048MB = 2048MB total
<5>[    0.000000] Memory: 1355548k/1355548k available, 741604k reserved, 884736K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc0b68bd4   (11651 kB)
<5>[    0.000000]       .init : 0xc0b69000 - 0xc0bc2440   ( 358 kB)
<5>[    0.000000]       .data : 0xc0bc4000 - 0xc0cd0b40   (1075 kB)
<5>[    0.000000]        .bss : 0xc0cd0b40 - 0xc0df14fc   (1155 kB)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<4>[    0.000000] rk_clk_tree_init start!
<3>[    0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
<3>[    0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
<4>[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
<4>[    0.000000] rkclk_init_clks: cnt_parent = 7
<4>[    0.000000] rkclk_init_clks: cnt_rate = 28
<4>[    0.000000] rk3288 set GPLL BW 20 for HDMI!
<6>[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
<6>[    0.000000] Switching to timer-based delay loop
<6>[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
<6>[    0.000000] process version: 3
<6>[    0.000000] channel:0, lkg:11
<6>[    0.000000] target-temp:80
<6>[    0.000000] channel:2, lkg:0
<6>[    0.000000] channel:0, lkg:11
<6>[    0.000000] channel:1, lkg:11
<6>[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
<6>[    0.345000] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
<6>[    0.345016] pid_max: default: 32768 minimum: 301
<6>[    0.345128] Security Framework initialized
<6>[    0.345145] SELinux:  Initializing.
<7>[    0.345180] SELinux:  Starting in permissive mode
<6>[    0.345217] Mount-cache hash table entries: 512
<6>[    0.345858] Initializing cgroup subsys debug
<6>[    0.345873] Initializing cgroup subsys memory
<6>[    0.345900] Initializing cgroup subsys freezer
<6>[    0.345929] CPU: Testing write buffer coherency: ok
<3>[    0.346252] /cpus/cpu@0 missing clock-frequency property
<3>[    0.346266] /cpus/cpu@1 missing clock-frequency property
<3>[    0.346276] /cpus/cpu@2 missing clock-frequency property
<3>[    0.346285] /cpus/cpu@3 missing clock-frequency property
<6>[    0.346332] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
<6>[    0.346384] Setting up static identity map for 0xc083d9f0 - 0xc083da48
<6>[    0.349527] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x17da (version 3.1)
<4>[    0.423220] CPU1: Booted secondary processor
<6>[    0.423254] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
<4>[    0.442895] CPU2: Booted secondary processor
<6>[    0.442918] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
<4>[    0.462605] CPU3: Booted secondary processor
<6>[    0.462627] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
<6>[    0.462730] Brought up 4 CPUs
<6>[    0.462759] SMP: Total of 4 processors activated (192.00 BogoMIPS).
<6>[    0.462768] CPU: All CPU(s) started in SVC mode.
<6>[    0.463495] devtmpfs: initialized
<6>[    0.467742] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
<6>[    0.468819] pinctrl core: initialized pinctrl subsystem
<6>[    0.469069] regulator-dummy: no parameters
<6>[    0.492675] NET: Registered protocol family 16
<6>[    0.494485] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[    0.494822] ion_snapshot: 0x1e9e8000 map to 0xe0907000 and copy to 0xc0dccacc (version 0.1)
<6>[    0.495057] Registered FIQ tty driver
<6>[    0.496363] console [ttyFIQ0] enabled
<6>[    0.496620] Registered fiq debugger ttyFIQ0
<4>[    0.497237] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
<4>[    0.497261] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
<4>[    0.497281] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
<4>[    0.497300] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
<4>[    0.497397] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
<4>[    0.497464] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
<4>[    0.497529] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
<4>[    0.497593] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
<4>[    0.497658] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
<4>[    0.497724] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
<4>[    0.497789] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
<4>[    0.497856] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
<4>[    0.497928] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
<4>[    0.497998] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
<4>[    0.498014] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
<4>[    0.498028] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
<4>[    0.498048] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
<7>[    0.498122] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0
<7>[    0.498182] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
<7>[    0.498241] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
<7>[    0.498294] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
<7>[    0.498345] gpiochip_add: registered GPIOs 128 to 159 on device: gpio4
<7>[    0.498397] gpiochip_add: registered GPIOs 160 to 191 on device: gpio5
<7>[    0.498455] gpiochip_add: registered GPIOs 192 to 223 on device: gpio6
<7>[    0.498508] gpiochip_add: registered GPIOs 224 to 255 on device: gpio7
<7>[    0.498560] gpiochip_add: registered GPIOs 256 to 287 on device: gpio8
<7>[    0.498618] gpiochip_add: registered GPIOs 288 to 319 on device: gpio15
<4>[    0.498645] rockchip_interrupts_register:bank_num=7
<4>[    0.500580] rockchip_pinctrl_probe:init ok
<6>[    0.507538] rk_iommu ff900800.iep_mmu: (iep) Enter
<6>[    0.507630] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[    0.507647] rk_iommu ff900800.iep_mmu: (iep) Initialized
<6>[    0.507816] rk_iommu ff950800.vip_mmu: (vip) Enter
<6>[    0.507896] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[    0.507912] rk_iommu ff950800.vip_mmu: (vip) Initialized
<6>[    0.508076] rk_iommu ff930300.vopb_mmu: (vopb) Enter
<6>[    0.508154] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[    0.508169] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
<6>[    0.508333] rk_iommu ff940300.vopl_mmu: (vopl) Enter
<6>[    0.508406] rk_iommu ff940300.vopl_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[    0.508422] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
<6>[    0.508599] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
<6>[    0.508674] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[    0.508690] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
<6>[    0.508857] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
<6>[    0.508933] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[    0.508950] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
<6>[    0.509130] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
<6>[    0.509206] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
<6>[    0.509222] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
<6>[    0.511381] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.511397] hw-breakpoint: maximum watchpoint size is 4 bytes.
<3>[    0.512005] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
<4>[    0.512032] DDR DEBUG: version 1.00 20150126
<4>[    0.512062] DDR DEBUG: Channel a:
<4>[    0.512073] DDR DEBUG: DDR3 Device
<4>[    0.512088] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
<4>[    0.512099] DDR DEBUG: Channel b:
<4>[    0.512108] DDR DEBUG: DDR3 Device
<4>[    0.512121] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
<4>[    0.512133] DDR DEBUG: addr=0xcda000
<4>[    0.512144] DDR DEBUG: stride=9, size=256, halfcap=40000000
<4>[    0.512155] DDR DEBUG: socAddr[0]=0xcda000, socAddr[1]=0xcda100
<4>[    0.512167] DDR DEBUG: chAddr[0]=0xcda000, chAddr[1]=0xcda000
<4>[    0.512180] DDR DEBUG: dtar[0]=0x2019b000, dtar[1]=0x2019b000
<4>[    0.512238] DDR DEBUG: init success!!! freq=200MHz
<4>[    0.512248] DDR DEBUG: Channel a:
<4>[    0.512262] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[    0.512278] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[    0.512294] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[    0.512310] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[    0.512325] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[    0.512338] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
<4>[    0.512348] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<4>[    0.512357] DDR DEBUG: Channel b:
<4>[    0.512370] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[    0.512386] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[    0.512401] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[    0.512417] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
<4>[    0.512431] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[    0.512442] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
<4>[    0.512452] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<6>[    0.536537] bio: create slab <bio-0> at 0
<6>[    0.537082] Rockchip hdmi driver version 2.0
<6>[    0.537082] .
<5>[    0.538365] SCSI subsystem initialized
<6>[    0.538523] usbcore: registered new interface driver usbfs
<6>[    0.538571] usbcore: registered new interface driver hub
<6>[    0.538662] usbcore: registered new device driver usb
<7>[    0.538946] of_get_named_gpio_flags exited with status 14
<7>[    0.538980] of_get_named_gpio_flags exited with status 12
<7>[    0.540114] of_get_named_gpio_flags exited with status 15
<7>[    0.540135] of_get_named_gpio_flags exited with status 16
<6>[    0.540723] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
<7>[    0.540843] of_get_named_gpio_flags exited with status 260
<7>[    0.540863] of_get_named_gpio_flags exited with status 261
<6>[    0.541000] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
<7>[    0.541100] of_get_named_gpio_flags exited with status 201
<7>[    0.541118] of_get_named_gpio_flags exited with status 202
<6>[    0.541503] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
<7>[    0.541615] of_get_named_gpio_flags exited with status 81
<7>[    0.541633] of_get_named_gpio_flags exited with status 80
<6>[    0.541764] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
<6>[    0.541894] media: Linux media interface: v0.10
<6>[    0.541934] Linux video capture interface: v2.00
<6>[    0.542056] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.542070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.542094] PTP clock support registered
<4>[    0.542141] i2c-core: driver [bq24296] using legacy suspend method
<4>[    0.542154] i2c-core: driver [bq24296] using legacy resume method
<4>[    0.542845] ion_drm_heap_create: 0@0
<6>[    0.542988] Rockchip ion module is successfully loaded (v1.1)
<6>[    0.543170] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.543563] Bluetooth: Core ver 2.16
<6>[    0.543602] NET: Registered protocol family 31
<6>[    0.543614] Bluetooth: HCI device and connection manager initialized
<6>[    0.543632] Bluetooth: HCI socket layer initialized
<6>[    0.543649] Bluetooth: L2CAP socket layer initialized
<6>[    0.543679] Bluetooth: SCO socket layer initialized
<6>[    0.543935] cfg80211: Calling CRDA to update world regulatory domain
<7>[    0.544846] of_get_named_gpio_flags exited with status 228
<4>[    0.545409] rk808_i2c_probe,line=1360
<4>[    0.545960] rk808_pre_init,line=1229
<7>[    0.555859] of_get_named_gpio_flags exited with status 4
<7>[    0.555873] of_get_named_gpio_flags exited with status 11
<7>[    0.555885] of_get_named_gpio_flags exited with status 227
<6>[    0.555911] rk808_i2c_probe: rk808_pmic_sleep=0
<6>[    0.555932] rk808_i2c_probe: rk808_pmic_usb_hub_reset=1
<6>[    0.562243] vdd_arm: 712 <--> 1500 mV at 1100 mV
<6>[    0.567871] vdd_gpu: 712 <--> 1500 mV at 1100 mV
<6>[    0.574326] rk_dcdc3: 1200 mV
<6>[    0.581092] vccio: 1800 <--> 3300 mV at 3300 mV
<6>[    0.587563] rk_ldo1: 3300 mV
<6>[    0.594010] rk_ldo2: 3300 mV
<6>[    0.600456] rk_ldo3: 1000 mV
<6>[    0.606899] rk_ldo4: 1800 mV
<6>[    0.611345] vcc_sd: 1800 <--> 3300 mV at 3300 mV
<6>[    0.617788] rk_ldo6: 1000 mV
<6>[    0.624248] rk_ldo7: 1800 mV
<6>[    0.630698] rk_ldo8: 3300 mV
<4>[    0.632309] rk_battery_charger_detect_cb , battery_charger_detect 1
<6>[    0.633999] rk_ldo9: at 3300 mV
<6>[    0.637293] rk_ldo10: at 3300 mV
<6>[    0.640036] rk808_irq_init: rk808_pmic_irq=1
<4>[    0.640373] i2c-core: driver [rk818] using legacy suspend method
<4>[    0.640388] i2c-core: driver [rk818] using legacy resume method
<4>[    0.640808] rk808_rtc_probe,line=540
<6>[    0.657738] rk808-rtc rk808-rtc: rtc core: registered rk808 as rtc0
<4>[    0.661248] rk808_rtc_probe:ok
<6>[    0.662693] Switching to clocksource arch_sys_counter
<6>[    0.686074] rga: Module initialized.
<6>[    0.686790] rga2 ff920000.rga: rga ion client create success!
<6>[    0.686963] rga: Driver loaded succesfully
<7>[    0.687180] uboot-logo-on:1
<6>[    0.687217] rk-fb rockchip-fb: rk fb ion client create success!
<6>[    0.687232] rk-fb rockchip-fb: rockchip framebuffer driver probe
<6>[    0.687529] rk-screen rk_screen.9: rockchip screen probe success
<6>[    0.687722] rk32-dsi
<4>[    0.687866] dsi->host.irq =51
<4>[    0.687888] load mipi dsi chip:rk_mipi_dsi.0 id:3133302a
<4>[    0.687899] mipi_dsi v1.3 2014-04-17
<6>[    0.687964] rk32-mipi ff960000.mipi: rk mipi_dsi probe success!
<6>[    0.687978] rk32-mipi ff960000.mipi: rockchip mipi_dsi v1.1 2014-06-17
<3>[    0.688430] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
<6>[    0.688651] graphics fb0: rockchip framebuffer registerd:fb0
<6>[    0.688967] graphics fb1: rockchip framebuffer registerd:fb1
<6>[    0.689143] graphics fb2: rockchip framebuffer registerd:fb2
<6>[    0.689305] graphics fb3: rockchip framebuffer registerd:fb3
<6>[    0.689525] rk3288-lcdc lcdc0: lcdc0: dclk:76000000>>fps:60
<6>[    0.689543] rk3288-lcdc lcdc0: wakeup from standby!
<6>[    0.706154] alloc_buffer:ion_phy_addr=0x55c00000
<6>[    0.712568] fb0:phy:55c00000>>vir:e0991000>>len:0xc00000
<6>[    0.718627] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
<3>[    0.718802] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
<4>[    0.718817] rk_fb_trsm_ops_get:un supported transmitter:0!
<6>[    0.719042] graphics fb4: rockchip framebuffer registerd:fb4
<6>[    0.719350] graphics fb5: rockchip framebuffer registerd:fb5
<6>[    0.719524] graphics fb6: rockchip framebuffer registerd:fb6
<6>[    0.719691] graphics fb7: rockchip framebuffer registerd:fb7
<6>[    0.719707] fb4:phy:55c00000>>vir:e0991000>>len:0xc00000
<6>[    0.719723] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
<4>[    0.720102] rockchip_set_mux:warning ignore bank num 15
<4>[    0.720240] rockchip_set_mux:warning ignore bank num 15
<4>[    0.720358] rockchip_set_mux:warning ignore bank num 15
<4>[    0.720475] rockchip_set_mux:warning ignore bank num 15
<4>[    0.720597] rockchip_set_mux:warning ignore bank num 15
<4>[    0.720714] rockchip_set_mux:warning ignore bank num 15
<4>[    0.721659] rockchip_set_mux:warning ignore bank num 15
<4>[    0.721846] rockchip_set_mux:warning ignore bank num 15
<4>[    0.722778] rockchip_set_mux:warning ignore bank num 15
<4>[    0.722927] rockchip_set_mux:warning ignore bank num 15
<4>[    0.723865] rockchip_set_mux:warning ignore bank num 15
<4>[    0.724029] rockchip_set_mux:warning ignore bank num 15
<4>[    0.724971] rockchip_set_mux:warning ignore bank num 15
<4>[    0.725121] rockchip_set_mux:warning ignore bank num 15
<4>[    0.726042] rockchip_set_mux:warning ignore bank num 15
<6>[    0.727497] NET: Registered protocol family 2
<6>[    0.728183] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.728265] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.728340] TCP: Hash tables configured (established 4096 bind 4096)
<6>[    0.728402] TCP: reno registered
<6>[    0.728418] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.728445] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.728635] NET: Registered protocol family 1
<6>[    0.729307] Unpacking initramfs...
<6>[    0.799347] Freeing initrd memory: 1308K (c5bf0000 - c5d37000)
<6>[    0.800056] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
<6>[    0.800723] vcodec_service: probe device ff9a0000.vpu_service
<4>[    0.800925] vcodec_service: No reset resource define
<6>[    0.801094] vcodec_service: ff9a0000.vpu_service: power on
<6>[    0.801186] vcodec_service: probe device ff9a0000.vpu_service
<6>[    0.801205] vcodec_service: checking hw id 4831
<6>[    0.801698] vcodec_service: ff9a0000.vpu_service: power off...
<6>[    0.801743] vcodec_service: done
<6>[    0.801753] vcodec_service: init success
<6>[    0.801813] vcodec_service: probe device ff9c0000.hevc_service
<6>[    0.802153] vcodec_service: ff9c0000.hevc_service: power on
<6>[    0.802217] vcodec_service: probe device ff9c0000.hevc_service
<6>[    0.802233] vcodec_service: checking hw id 6867
<6>[    0.802478] vcodec_service: ff9c0000.hevc_service: power off...
<6>[    0.802520] vcodec_service: done
<6>[    0.802531] vcodec_service: init success
<4>[    0.802681] rknandbase v1.0 2014-03-31
<4>[    0.802808] rknand: probe of ff400000.nandc0 failed with error -1
<4>[    0.802941] rknand_driver:ret = 0
<6>[    0.804169] audit: initializing netlink socket (disabled)
<5>[    0.804217] type=2000 audit(0.460:1): initialized
<4>[    0.805081] bounce pool size: 64 pages
<6>[    0.809759] fuse init (API version 7.22)
<6>[    0.810132] msgmni has been set to 954
<7>[    0.810186] SELinux:  Registering netfilter hooks
<6>[    0.812047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
<6>[    0.812068] io scheduler noop registered
<6>[    0.812080] io scheduler deadline registered
<6>[    0.812166] io scheduler cfq registered (default)
<6>[    0.812446] lidar control probe begin.
<7>[    0.812472] of_get_named_gpio_flags exited with status 177
<6>[    0.812493] lidar control gpio request ret 0
<6>[    0.812516] lidar control probe ok!
<7>[    0.813237] of_get_named_gpio_flags exited with status 226
<6>[    0.813570] hdmi2mipi probe begin!
<7>[    0.813711] of_get_named_gpio_flags exited with status 172
<6>[    0.813726] hdmi2mipi probe ok!
<4>[    0.813843] hdmi2mipi reset, 172 --> 1
<6>[    0.814541] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.
<4>[    0.815229] IEP Driver loaded succesfully
<4>[    0.815326] Module initialized.
<6>[    0.816112] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
<6>[    0.816133] dma-pl330 ffb20000.pdma:     DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
<6>[    0.817494] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
<6>[    0.817515] dma-pl330 ff250000.pdma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
<6>[    0.817887] vdd_logic: 925 <--> 1400 mV at 1000 mV
<4>[    0.818218] rk_serial.c v1.8 2014-03-04
<6>[    0.818454] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
<6>[    0.818651] serial ff180000.serial: membase e259a000
<6>[    0.818814] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 88) is a rk29_serial.1
<6>[    0.818992] serial ff190000.serial: membase e259c000
<6>[    0.819150] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 90) is a rk29_serial.3
<6>[    0.819327] serial ff1b0000.serial: membase e259e000
<6>[    0.819503] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 91) is a rk29_serial.4
<6>[    0.819672] serial ff1c0000.serial: membase e25be000
<6>[    0.822446] loop: module loaded
<6>[    0.822812] zram: Created 1 device(s) ...
<4>[    0.822881] i2c-core: driver [mpu6050B1] using legacy suspend method
<4>[    0.822895] i2c-core: driver [mpu6050B1] using legacy resume method
<6>[    0.822911] mpu_init: Probe name mpu6050B1
<6>[    0.823056] ak8963_mod_init: Probe name ak8963_mod
<6>[    0.823369] earled probe begin!
<7>[    0.823504] of_get_named_gpio_flags exited with status 245
<6>[    0.823522] earled probe ok!
<4>[    0.823538] earled reset, 245 --> 1
<6>[    0.824167] SCSI Media Changer driver v0.25
<3>[    0.824373] rockchip-pinctrl ff770000.pinctrl: pin gpio5-14 already requested by ff1c0000.serial; cannot claim for ff110000.spi
<3>[    0.824395] rockchip-pinctrl ff770000.pinctrl: pin-174 (ff110000.spi) status -22
<3>[    0.824411] rockchip-pinctrl ff770000.pinctrl: could not request pin 174 on device rockchip-pinctrl
<3>[    0.824427] rockchip-spi ff110000.spi: Error applying setting, reverse things back
<6>[    0.824476] dws->regs: e25e2000
<4>[    0.825348] rockchip_spi_probe:num_cs=2,bus_num=0,irq=76,freq=45692308 ok
<4>[    0.825475] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000800,result=0xaa05
<4>[    0.825492] _rockchip_pinconf_set:GPIO7-13,group=spi1-cs0, function=gpio7_spi1, type=3
<4>[    0.825507] rk3288_calc_drv_reg_and_bit:GPIO7-13, drv_reg=0x74, bit=10
<4>[    0.825521] _rockchip_pinconf_set:GPIO-7 13 data=0xc000000,type=3
<6>[    0.825553] dws->regs: e25e4000
<4>[    0.826345] rockchip_spi_probe:num_cs=1,bus_num=1,irq=77,freq=45692308 ok
<6>[    0.826498] dws->regs: e25e6000
<4>[    0.827226] rockchip_spi_probe:num_cs=2,bus_num=2,irq=78,freq=45692308 ok
<6>[    0.827519] tun: Universal TUN/TAP device driver, 1.6
<6>[    0.827532] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<4>[    0.827657] vmac_init.
<3>[    0.828236] stmmac_probe_config_dt: Can not read property: pmu_regulator.
<6>[    0.828255] stmmac_probe_config_dt: clock input/output? (input).
<6>[    0.828268] stmmac_probe_config_dt: TX delay(0x30).
<6>[    0.828280] stmmac_probe_config_dt: RX delay(0x10).
<7>[    0.828293] of_get_named_gpio_flags: can't parse gpios property
<7>[    0.828308] of_get_named_gpio_flags exited with status 135
<7>[    0.828317] of_get_named_gpio_flags: can't parse gpios property
<6>[    0.828328] stmmac_probe_config_dt: is rockchip,rk3288-gmac
<6>[    0.828340] stmmc_pltfr_init:
<3>[    0.828349] stmmc_pltfr_init: ERROR: Get power-gpio failed.
<6>[    0.828367] stmmc_pltfr_init: init for RGMII
<6>[    0.828378] tx delay=0x30
<6>[    0.828378] rx delay=0x10
<6>[    0.828395] tx delay=0x30
<6>[    0.828395] rx delay=0x10
<6>[    0.828840] stmmac - user ID: 0x10, Synopsys ID: 0x35
<6>[    0.828852]  Normal descriptors
<6>[    0.828860]  Ring mode enabled
<6>[    0.828872]  DMA HW capability register supported
<6>[    0.828885]  RX Checksum Offload Engine supported (type 2)
<6>[    0.828895]  TX Checksum insertion supported
<6>[    0.828904]  Wake-Up On Lan supported
<6>[    0.828943]  Enable RX Mitigation via HW Watchdog Timer
<6>[    0.829412] PPP generic driver version 2.4.2
<6>[    0.829567] PPP BSD Compression module registered
<6>[    0.829581] PPP Deflate Compression module registered
<6>[    0.829605] PPP MPPE Compression module registered
<6>[    0.829618] NET: Registered protocol family 24
<6>[    0.829654] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    0.829668] CSLIP: code copyright 1989 Regents of the University of California.
<4>[    0.829682] Rockchip WiFi SYS interface (V1.00) ...
<4>[    0.829718] RTL871X: module init start
<4>[    0.829730] RTL871X: rtl8188eu v4.3.0.8_13968.20150417
<4>[    0.829742] RTL871X: build time: Dec  1 2017 11:54:34
<6>[    0.829830] usbcore: registered new interface driver rtl8188eu
<4>[    0.829843] RTL871X: module init ret=0
<4>[    0.829854] esp_mem_init enter date Dec  1 2017 11:54:19
<4>[    0.829864] esp_mem_init VERSION [V2.5]
<4>[    0.829909] esp_mem_init complete
<6>[    0.829980] usbcore: registered new interface driver catc
<6>[    0.830049] usbcore: registered new interface driver kaweth
<6>[    0.830064] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
<6>[    0.830109] usbcore: registered new interface driver pegasus
<6>[    0.830152] usbcore: registered new interface driver rtl8150
<6>[    0.830193] usbcore: registered new interface driver r8152
<6>[    0.830205] hso: drivers/net/usb/hso.c: Option Wireless
<6>[    0.830286] usbcore: registered new interface driver hso
<6>[    0.830334] usbcore: registered new interface driver asix
<6>[    0.830376] usbcore: registered new interface driver ax88179_178a
<6>[    0.830432] usbcore: registered new interface driver cdc_ether
<6>[    0.830476] usbcore: registered new interface driver cdc_eem
<6>[    0.830514] usbcore: registered new interface driver dm9601
<6>[    0.830551] usbcore: registered new interface driver dm9620
<6>[    0.830601] usbcore: registered new interface driver smsc75xx
<6>[    0.830649] usbcore: registered new interface driver smsc95xx
<6>[    0.830688] usbcore: registered new interface driver gl620a
<6>[    0.830725] usbcore: registered new interface driver net1080
<6>[    0.830763] usbcore: registered new interface driver plusb
<6>[    0.830802] usbcore: registered new interface driver rndis_host
<6>[    0.830846] usbcore: registered new interface driver cdc_subset
<6>[    0.830885] usbcore: registered new interface driver zaurus
<6>[    0.830926] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[    0.830989] usbcore: registered new interface driver int51x1
<6>[    0.831028] usbcore: registered new interface driver kalmia
<6>[    0.831065] usbcore: registered new interface driver ipheth
<6>[    0.831107] usbcore: registered new interface driver sierra_net
<6>[    0.831152] usbcore: registered new interface driver cx82310_eth
<6>[    0.831199] usbcore: registered new interface driver cdc_ncm
<6>[    0.831239] usbcore: registered new interface driver qmi_wwan
<6>[    0.831277] usbcore: registered new interface driver cdc_mbim
<6>[    0.831290] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    0.833748] EHCI: ehci_rk_probe e2640000 e2640010
<6>[    0.833767] rockchip_ehci_host ff500000.usb: EHCI Host Controller
<6>[    0.833798] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
<6>[    0.834131] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
<6>[    0.849725] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
<6>[    0.849807] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    0.849825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.849840] usb usb1: Product: EHCI Host Controller
<6>[    0.849853] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
<6>[    0.849867] usb usb1: SerialNumber: ff500000.usb
<6>[    0.850287] hub 1-0:1.0: USB hub found
<6>[    0.850313] hub 1-0:1.0: 1 port detected
<6>[    0.850480] EHCI: ehci_rk_probe ok
<6>[    0.850599] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    0.850810] usbcore: registered new interface driver cdc_acm
<6>[    0.850823] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    0.850876] usbcore: registered new interface driver usblp
<6>[    0.850926] usbcore: registered new interface driver cdc_wdm
<6>[    0.850992] usbcore: registered new interface driver usb-storage
<6>[    0.851032] usbcore: registered new interface driver ums-alauda
<6>[    0.851071] usbcore: registered new interface driver ums-cypress
<6>[    0.851110] usbcore: registered new interface driver ums-datafab
<6>[    0.851148] usbcore: registered new interface driver ums_eneub6250
<6>[    0.851186] usbcore: registered new interface driver ums-freecom
<6>[    0.851226] usbcore: registered new interface driver ums-isd200
<6>[    0.851269] usbcore: registered new interface driver ums-jumpshot
<6>[    0.851309] usbcore: registered new interface driver ums-karma
<6>[    0.851348] usbcore: registered new interface driver ums-onetouch
<6>[    0.851387] usbcore: registered new interface driver ums-sddr09
<6>[    0.851427] usbcore: registered new interface driver ums-sddr55
<6>[    0.851466] usbcore: registered new interface driver ums-usbat
<6>[    0.851560] usbcore: registered new interface driver usbserial
<6>[    0.851604] usbcore: registered new interface driver usbserial_generic
<6>[    0.851637] usbserial: USB Serial support registered for generic
<6>[    0.851684] usbcore: registered new interface driver option
<6>[    0.851715] usbserial: USB Serial support registered for GSM modem (1-port)
<6>[    0.851790] usbcore: registered new interface driver trancevibrator
<6>[    0.851803] usb20_otg: version 3.10a 21-DEC-2012
<4>[    0.852229] e2680040
<4>[    0.852244] Core Release: 3.10a
<4>[    0.852256] Setting default values for core params
<4>[    0.852390] Using Buffer DMA mode
<4>[    0.852403] Periodic Transfer Interrupt Enhancement - disabled
<4>[    0.852414] Multiprocessor Interrupt Enhancement - disabled
<4>[    0.852427] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[    0.852438] ^^^^^^^^^^^^^^^^^Device Mode
<4>[    0.852452] Dedicated Tx FIFOs mode
<4>[    0.852471] pcd_init otg_dev = ddf26740
<6>[    0.852625] usb20_otg ff580000.usb: DWC OTG Controller
<6>[    0.852655] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
<6>[    0.852685] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
<6>[    0.852743] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    0.852760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.852774] usb usb2: Product: DWC OTG Controller
<6>[    0.852787] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
<6>[    0.852800] usb usb2: SerialNumber: ff580000.usb
<6>[    0.853209] hub 2-0:1.0: USB hub found
<6>[    0.853238] hub 2-0:1.0: 1 port detected
<6>[    0.853571] usb20_host: version 3.10a 21-DEC-2012
<4>[    0.856088] e2700040
<4>[    0.856102] Core Release: 3.10a
<4>[    0.856113] Setting default values for core params
<4>[    0.856218] Using Buffer DMA mode
<4>[    0.856230] Periodic Transfer Interrupt Enhancement - disabled
<4>[    0.856240] Multiprocessor Interrupt Enhancement - disabled
<4>[    0.856252] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[    0.856262] ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    0.856287] usb20_host ff540000.usb: DWC OTG Controller
<6>[    0.856313] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
<6>[    0.856342] usb20_host ff540000.usb: irq 57, io mem 0x00000000
<4>[    0.856435] Init: Power Port (0)
<6>[    0.856492] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    0.856509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.856523] usb usb3: Product: DWC OTG Controller
<6>[    0.856536] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
<6>[    0.856549] usb usb3: SerialNumber: ff540000.usb
<6>[    0.856960] hub 3-0:1.0: USB hub found
<6>[    0.856987] hub 3-0:1.0: 1 port detected
<6>[    0.857694] usbcore: registered new interface driver xpad
<6>[    0.857751] usbcore: registered new interface driver usb_acecad
<6>[    0.857806] usbcore: registered new interface driver aiptek
<6>[    0.857854] usbcore: registered new interface driver gtco
<6>[    0.857901] usbcore: registered new interface driver hanwang
<6>[    0.857947] usbcore: registered new interface driver kbtab
<6>[    0.858000] usbcore: registered new interface driver wacom
<4>[    0.858012] <<-GTP-INFO->> GTP driver installing...
<4>[    0.858022] ---<HERE WE IN THE GOODIX_TS_INIT>--
<4>[    0.858278] ====>HERE WE IN THE GOODIX_TS_PROBE FUNCTION<======
<4>[    0.858292] <<-GTP-INFO->> GTP Driver Version: V2.4<2014/11/28>
<4>[    0.858304] <<-GTP-INFO->> GTP Driver Built@11:53:25, Dec  1 2017
<4>[    0.858315] <<-GTP-INFO->> GTP I2C Address: 0x14
<7>[    0.858335] of_get_named_gpio_flags exited with status 238
<7>[    0.858346] of_get_named_gpio_flags exited with status 237
<4>[    0.858355] <<-GTP-DEBUG->> [2457]Clock ticks for an esd cycle: 200
<4>[    0.858410] rockchip_gpio_request:GPIO7-13
<4>[    0.858425] rockchip_gpio_direction_input:GPIO7-13
<4>[    0.858441] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x8205
<4>[    0.858458] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to input,data=0x20001c,result=0x20001c
<4>[    0.858476] rockchip_gpio_set:GPIO7-13 level = 0
<4>[    0.858488] rockchip_gpio_direction_output:set GPIO7-13 level 0
<4>[    0.858502] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x8205
<4>[    0.858518] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x20201c,result=0x20201c
<4>[    0.898921] rockchip_gpio_set:GPIO7-13 level = 1
<4>[    0.898935] rockchip_gpio_direction_output:set GPIO7-13 level 1
<4>[    0.898950] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x8205
<4>[    0.898966] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x20601c,result=0x20601c
<4>[    0.918602] rockchip_gpio_direction_input:GPIO7-13
<4>[    0.918619] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x8205
<4>[    0.918634] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to input,data=0x20401c,result=0x20401c
<4>[    0.948312] dwc_otg_hcd_suspend, usb device mode
<4>[    0.978382] <<-GTP-INFO->> IC Version: 9271_1050
<4>[    0.978400] <<-GTP-DEBUG->> [1370]Config Groups' Lengths: 186, 0, 0, 0, 0, 0
<4>[    0.979203] <<-GTP-INFO->> Sensor_ID: 2
<4>[    0.979217] <<-GTP-INFO->> Config group0 used,length: 186
<4>[    0.979628] <<-GTP-DEBUG->> [1455]Config Version: 71, 0x47; IC Config Version: 71, 0x47
<4>[    0.979643] config[TRIGGER_LOC]:0x3d  GTP_INT_TRIGGER:0
<4>[    0.979655] <<-GTP-INFO->> Driver send config.
<4>[    0.986915] <<-GTP-DEBUG->> [1571]X_MAX: 1280, Y_MAX: 800, TRIGGER: 0x00
<4>[    0.997334] <<-GTP-INFO->> create proc entry gt9xx_config success
<4>[    0.997347] <<-GTP-INFO->> Esd started
<6>[    0.997520] input: gt9xx as /devices/virtual/input/input0
<4>[    0.997714] <<-GTP-DEBUG->> [1770]INT trigger type:0
<4>[    0.997820] <<-GTP-INFO->> GTP works in interrupt mode.
<4>[    0.997837] <<-GTP-INFO->> Applied memory size:2562.
<4>[    0.997849] <<-GTP-INFO->> I2C function: without pre and end cmd!
<4>[    0.997877] <<-GTP-INFO->> Create proc entry success!
<4>[    0.997918] THE VALUE OF i2c_add_driver=0
<4>[    0.998217] sensor_register_slave:mma8452,id=17
<4>[    0.998231] sensor_register_slave:gs_mc3230,id=23
<4>[    0.998241] gsensor_init
<4>[    0.998252] sensor_register_slave:mpu6880_acc,id=24
<4>[    0.998263] sensor_register_slave:mpu6500_acc,id=25
<4>[    0.998274] sensor_register_slave:cm3217,id=48
<4>[    0.998285] sensor_register_slave:cm3218,id=49
<6>[    0.998438] i2c /dev entries driver
<6>[    0.999027] IR NEC protocol handler initialized
<6>[    0.999042] IR RC5(x) protocol handler initialized
<6>[    0.999053] IR RC6 protocol handler initialized
<6>[    0.999063] IR JVC protocol handler initialized
<6>[    0.999072] IR Sony protocol handler initialized
<6>[    0.999083] IR RC5 (streamzap) protocol handler initialized
<6>[    0.999093] IR SANYO protocol handler initialized
<6>[    0.999103] IR MCE Keyboard/mouse protocol handler initialized
<6>[    0.999262] usbcore: registered new interface driver uvcvideo
<6>[    0.999274] USB Video Class driver (1.1.1)
<4>[    0.999286] CamSys driver version: v0.32.0,  CamSys head file version: v0.11.0
<4>[    1.000321] D1:camsys_mipiphy_probe_cb(115): compatible is rockchip,rk3288
<4>[    1.000321]
<4>[    1.000398] D1:camsys_mipiphy_probe_cb(186): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
<4>[    1.000555] D1:camsys_mipiphy_probe_cb(183): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xe25f8000  size: 0x4000)
<4>[    1.001199] D1:camsys_platform_probe(1394): ff910000.isp memory:
<4>[    1.001219] D1:camsys_platform_probe(1404):     Register memory (phy: 0xff910000 vir: 0xe2620000 size: 0x10000)
<4>[    1.001236] D1:camsys_platform_probe(1399):     I2c memory (phy: 0x1dfa4000 vir: 0xddfa4000 size: 0x1000)
<4>[    1.001251] D1:camsys_init_ext_fsh_module(20): init external flash module
<4>[    1.001263] D1:camsys_platform_probe(1419): Probe ff910000.isp device success
<6>[    1.001634] not find test_power_init dev node
<4>[    1.001680] i2c-core: driver [bq27320] using legacy suspend method
<4>[    1.001692] i2c-core: driver [bq27320] using legacy resume method
<4>[    1.002031] rockchip_temp_probe,line=362
<6>[    1.056364] tsadc ff280000.tsadc: initialized
<6>[    1.056741] device-mapper: uevent: version 1.0.3
<6>[    1.056984] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
<6>[    1.057289] Bluetooth: HCI UART driver ver 2.2
<6>[    1.057305] Bluetooth: HCI H4 protocol initialized
<6>[    1.057316] Bluetooth: HCILL protocol initialized
<6>[    1.057328] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.21
<6>[    1.057340] rtk_btusb: Register usb char device interface for BT driver
<6>[    1.057526] usbcore: registered new interface driver rtk_btusb
<4>[    1.065969] cpufreq version 1.0, suspend freq 1200 MHz
<6>[    1.066166] cpuidle: using governor ladder
<6>[    1.066196] cpuidle: using governor menu
<6>[    1.066239] Synopsys Designware Multimedia Card Interface Driver
<6>[    1.066251] MHSC version = Ver 2.00 2015-06-10
<4>[    1.066564] dw cru_regsbase addr 0x1d8.
<4>[    1.066577] dw cru_reset_offset val 3.
<6>[    1.066593] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
<3>[    1.066637] dwmmc_rockchip ff0f0000.rksdmmc: failed to get hpclk_mmc
<6>[    1.066945] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
<4>[    1.067114] dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
<7>[    1.067146] of_get_named_gpio_flags: can't parse gpios property
<4>[    1.067274] 1358..dw_mci_set_ios:  no card. [mmc0]
<4>[    1.085877] 1358..dw_mci_set_ios:  no card. [mmc0]
<4>[    1.105574] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
<6>[    1.105586] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
<6>[    1.105594] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
<4>[    1.105812] dw cru_regsbase addr 0x1d8.
<4>[    1.105821] dw cru_reset_offset val 0.
<6>[    1.105831] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
<3>[    1.105860] dwmmc_rockchip ff0c0000.rksdmmc: failed to get hpclk_mmc
<6>[    1.106701] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
<4>[    1.106820] dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]
<7>[    1.106841] of_get_named_gpio_flags: can't parse gpios property
<4>[    1.107427] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
<4>[    1.107502] 1358..dw_mci_set_ios:  no card. [mmc1]
<4>[    1.125245] 1358..dw_mci_set_ios:  no card. [mmc1]
<6>[    1.137716] mmc0: BKOPS_EN bit is not set
<6>[    1.139605] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
<4>[    1.139629] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
<4>[    1.139683] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
<6>[    1.139776] mmc0: new high speed MMC card at address 0001
<6>[    1.140043] mmcblk0: mmc0:0001 AJNB4R 14.5 GiB
<6>[    1.140344]      uboot: 0x000400000 -- 0x000800000 (4 MB)
<6>[    1.140356]       misc: 0x000800000 -- 0x000c00000 (4 MB)
<6>[    1.140365]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
<6>[    1.140374]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
<6>[    1.140383]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
<6>[    1.140391]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
<6>[    1.140400]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
<6>[    1.140409]      cache: 0x00a000000 -- 0x012000000 (128 MB)
<6>[    1.140417]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
<6>[    1.140425]     system: 0x012400000 -- 0x072400000 (1536 MB)
<6>[    1.140434]   metadata: 0x072400000 -- 0x073400000 (16 MB)
<6>[    1.140442]   userdata: 0x073400000 -- 0x0b3400000 (1024 MB)
<6>[    1.140451] radical_update: 0x0b3400000 -- 0x0b7400000 (64 MB)
<6>[    1.140459]       user: 0x0b7400000 -- 0x3a3a00000 (11974 MB)
<4>[    1.141483] <<-GTP-DEBUG->> [749]touch_num:0
<4>[    1.141483]
<4>[    1.141498] <<-GTP-DEBUG->> [919]2 touch_num:0 pre_touch:0
<4>[    1.141498]
<6>[    1.140485]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p141358..dw_mci_set_ios:  no card. [mmc1]
<6>[    1.144981] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
<6>[    1.144994] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
<4>[    1.145299] dw cru_regsbase addr 0x1d8.
<4>[    1.145308] dw cru_reset_offset val 1.
<6>[    1.145318] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
<3>[    1.145355] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
<6>[    1.145603] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
<4>[    1.145717] dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
<7>[    1.145736] of_get_named_gpio_flags: can't parse gpios property
<4>[    1.145972] 1358..dw_mci_set_ios:  no card. [mmc2]
<4>[    1.159513] <<-GTP-DEBUG->> [749]touch_num:0
<4>[    1.159513]
<4>[    1.159526] <<-GTP-DEBUG->> [919]2 touch_num:0 pre_touch:0
<4>[    1.159526]
<4>[    1.164609] 1358..dw_mci_set_ios:  no card. [mmc2]
<4>[    1.177427] <<-GTP-DEBUG->> [749]touch_num:0
<4>[    1.177427]
<4>[    1.177440] <<-GTP-DEBUG->> [919]2 touch_num:0 pre_touch:0
<4>[    1.177440]
<4>[    1.184303] 1358..dw_mci_set_ios:  no card. [mmc2]
<6>[    1.184317] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
<6>[    1.184330] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
<6>[    1.184653] hidraw: raw HID events driver (C) Jiri Kosina
<6>[    1.186132] usbcore: registered new interface driver usbhid
<6>[    1.186143] usbhid: USB HID core driver
<6>[    1.186262] ashmem: initialized
<6>[    1.186375] logger: created 256K log 'log_main'
<6>[    1.186472] logger: created 256K log 'log_events'
<6>[    1.186568] logger: created 256K log 'log_radio'
<6>[    1.186659] logger: created 256K log 'log_system'
<7>[    1.187650] of_get_named_gpio_flags exited with status 5
<7>[    1.187660] of_get_named_gpio_flags exited with status 5
<6>[    1.187893] input: rk29-keypad as /devices/ff100000.adc/key.40/input/input1
<6>[    1.189176] rockchip-spdif ff880000.rockchip-spdif: spdif ready.
<6>[    1.189408] u32 classifier
<6>[    1.189418]     Actions configured
<6>[    1.189431] Netfilter messages via NETLINK v0.30.
<6>[    1.189491] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[    1.189832] ctnetlink v0.93: registering with nfnetlink.
<6>[    1.189904] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    1.189913] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    1.190188] xt_time: kernel timezone is -0000
<6>[    1.190395] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.190533] arp_tables: (C) 2002 David S. Miller
<6>[    1.190575] TCP: cubic registered
<6>[    1.190582] Initializing XFRM netlink socket
<6>[    1.190804] NET: Registered protocol family 10
<6>[    1.191362] mip6: Mobile IPv6
<6>[    1.191392] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.191520] sit: IPv6 over IPv4 tunneling driver
<6>[    1.191861] NET: Registered protocol family 17
<6>[    1.191887] NET: Registered protocol family 15
<5>[    1.191948] Bridge firewalling registered
<6>[    1.191961] Ebtables v2.0 registered
<6>[    1.192119] Bluetooth: RFCOMM TTY layer initialized
<6>[    1.192146] Bluetooth: RFCOMM socket layer initialized
<6>[    1.192155] Bluetooth: RFCOMM ver 1.11
<6>[    1.192163] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    1.192170] Bluetooth: BNEP filters: protocol multicast
<6>[    1.192182] Bluetooth: BNEP socket layer initialized
<6>[    1.192190] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    1.192203] Bluetooth: HIDP socket layer initialized
<6>[    1.192233] l2tp_core: L2TP core driver, V2.0
<6>[    1.192248] l2tp_ppp: PPPoL2TP kernel driver, V2.0
<6>[    1.192256] [WLAN_RFKILL]: Enter rfkill_wlan_init
<6>[    1.192470] [WLAN_RFKILL]: Enter rfkill_wlan_probe
<6>[    1.192482] [WLAN_RFKILL]: can't find rockchip,grf property
<6>[    1.192492] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
<6>[    1.192502] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
<6>[    1.192512] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
<6>[    1.192522] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
<7>[    1.192537] of_get_named_gpio_flags exited with status 156
<6>[    1.192545] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
<7>[    1.192554] of_get_named_gpio_flags: can't parse gpios property
<7>[    1.192561] of_get_named_gpio_flags exited with status 158
<6>[    1.192568] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
<6>[    1.192578] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
<6>[    1.192605] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
<6>[    1.192615] [WLAN_RFKILL]: Exit rfkill_wlan_probe
<6>[    1.192664] [BT_RFKILL]: Enter rfkill_rk_init
<7>[    1.192802] of_get_named_gpio_flags exited with status 147
<6>[    1.192811] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
<7>[    1.192822] of_get_named_gpio_flags exited with status 155
<6>[    1.192830] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
<7>[    1.192840] of_get_named_gpio_flags exited with status 157
<6>[    1.192847] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
<7>[    1.192856] of_get_named_gpio_flags exited with status 154
<6>[    1.192863] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
<7>[    1.192872] of_get_named_gpio_flags exited with status 159
<6>[    1.192879] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
<6>[    1.192933] [BT_RFKILL]: Request irq for bt wakeup host
<6>[    1.193031] [BT_RFKILL]: ** disable irq
<6>[    1.193110] [BT_RFKILL]: ap6335 device registered.
<4>[    1.193840] rk3288_init_suspend
<4>[    1.193854] rk3288_suspend_init enter
<4>[    1.194042] rk3288_suspend_init: pm_ctrbits =200007
<4>[    1.194075] gpio_get_dts_info suspend:4
<4>[    1.194083] gpio_get_dts_info resume:4
<4>[    1.194090] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
<4>[    1.194153] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
<4>[    1.194316] clks_gating_suspend_init:clkgt info ok
<5>[    1.194426] Registering SWP/SWPB emulation handler
<6>[    1.194440] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 0x02000000@0x7dc00000
<4>[    1.195613] <<-GTP-DEBUG->> [749]touch_num:0
<4>[    1.195613]
<4>[    1.195629] <<-GTP-DEBUG->> [919]2 touch_num:0 pre_touch:0
<4>[    1.195629]
<6>[    1.201212] ddrfreq: verion 1.2 20140526
<6>[    1.201227] ddrfreq: normal 396MHz video_1080p 240MHz video_4k 396MHz dualview 396MHz idle 0MHz suspend 200MHz reboot 396MHz
<6>[    1.201235] ddrfreq: auto-freq=0
<6>[    1.201241] ddrfreq: auto-freq-table[0] 240MHz
<6>[    1.201247] ddrfreq: auto-freq-table[1] 324MHz
<6>[    1.201253] ddrfreq: auto-freq-table[2] 396MHz
<6>[    1.201259] ddrfreq: auto-freq-table[3] 528MHz
<6>[    1.206949] regulator-dummy: disabling
<4>[    1.207041] =======================================================
<4>[    1.207051] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[    1.207057] =======================================================
<4>[    1.207064]  WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
<4>[    1.207113] dhd_module_init: in
<4>[    1.207122] ======== bcm_wlan_set_plat_data ========
<6>[    1.207128] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
<4>[    1.207149] host_oob_irq: 198  
<4>[    1.207154] host_oob_irq_flags=4
<4>[    1.207160] dhd_wifi_platform_load: Enter
<4>[    1.207172] pcd_pullup, is_on 0
<4>[    1.207176] Power-up adapter 'DHD generic adapter'
<4>[    1.207195] wifi_platform_set_power = 1
<4>[    1.207201] ======== PULL WL_REG_ON HIGH! ========
<6>[    1.207207] [WLAN_RFKILL]: rockchip_wifi_power: 1
<6>[    1.207214] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
<6>[    1.207220] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
<6>[    1.207223] file system registered
<6>[    1.207834] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    1.207844] android_usb gadget: Number of LUNs=2
<6>[    1.207851]  lun0: LUN: removable file: (no medium)
<6>[    1.207858]  lun1: LUN: removable file: (no medium)
<6>[    1.208022] android_usb gadget: android_usb ready
<6>[    1.208072] sensor_init: Probe name sensors
<4>[    1.208088] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
<6>[    1.212192] rk808-rtc rk808-rtc: setting system clock to 2016-08-01 08:50:04 UTC (1470041404)
<7>[    1.217197] of_get_named_gpio_flags exited with status 259
<3>[    1.217221] /adc@ff100000/rockchip_headset: arguments longer than property
<7>[    1.217229] of_get_named_gpio_flags: can't parse gpios property
<4>[    1.217239] rockchip_headset_probe() have not set adc chan
<4>[    1.217247] rockchip_headset_probe() headset have no hook mode
<6>[    1.217365] input: rockchip_headset.39 as /devices/ff100000.adc/rockchip_headset.39/input/input2
<6>[    1.219288] rockchip-spdif-card rockchip-spdif-card.31:  rk-hdmi-spdif-hifi <-> ff880000.rockchip-spdif mapping ok
<6>[    1.220028] usbcore: registered new interface driver snd-usb-audio
<6>[    1.220038] ALSA device list:
<6>[    1.220044]   #0: RK-SPDIF-CARD
<6>[    1.220285] Freeing unused kernel memory: 356K (c0b69000 - c0bc2000)
<7>[    1.224024] SELinux: 2048 avtab hash slots, 5368 rules.
<7>[    1.225949] SELinux: 2048 avtab hash slots, 5368 rules.
<7>[    1.225970] SELinux:  1 users, 2 roles, 442 types, 0 bools, 1 sens, 1024 cats
<7>[    1.225979] SELinux:  86 classes, 5368 rules
<7>[    1.226952] SELinux:  Completing initialization.
<7>[    1.226959] SELinux:  Setting up existing superblocks.
<7>[    1.226976] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[    1.226994] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[    1.227045] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[    1.227058] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[    1.227075] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.227090] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
<7>[    1.227269] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[    1.239172] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[    1.239189] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[    1.239200] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[    1.239211] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[    1.239231] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[    1.239279] SELinux: initialized (dev configfs, type configfs), not configured for labeling
<7>[    1.239289] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.239311] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<6>[    1.312193] [WLAN_RFKILL]: wifi turn on power. 156
<5>[    1.325426] type=1403 audit(1470041404.610:2): policy loaded auid=4294967295 ses=4294967295
<11>[    1.351013] init: could not import file 'init.box.samba.rc' from '/init.rk30board.rc'
<11>[    1.352866] init: invalid gid 'trace'
<11>[    1.451452] init: /dev/hw_random not found
<6>[    1.451512] keychord: using input dev rk29-keypad for fevent
<7>[    1.451966] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[    1.452234] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.452508] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[    1.453771] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.453927] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.455065] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<11>[    1.456292] init: /dev/hw_random not found
<14>[    1.457268] fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
<14>[    1.458150] resize2fs: resize2fs 1.42.9 (28-Dec-2013)resize2fs: The filesystem is already 393216 blocks long.  Nothing to do!resize2fs:
<4>[    1.461933] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
<6>[    1.470243] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    1.470268] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<14>[    1.470333] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/system,/system,ext4)=0
<14>[    1.472258] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
<14>[    1.479000] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[    1.479043] e2fsck: system: clean, 1874/81216 files, 110348/393216 blocks
<6>[    1.484840] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<7>[    1.484860] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<14>[    1.484910] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/system,target=/system,type=ext4)=0
<6>[    1.495981] EXT4-fs (mmcblk0p8): recovery complete
<6>[    1.496407] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
<7>[    1.496424] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr
<14>[    1.496461] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0
<4>[    1.496814] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
<6>[    1.502518] EXT4-fs (mmcblk0p11): recovery complete
<6>[    1.502534] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    1.502550] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
<14>[    1.502601] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,/metadata,ext4)=0
<14>[    1.503426] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata
<14>[    1.509322] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[    1.509357] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks
<6>[    1.515441] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
<7>[    1.515462] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
<14>[    1.515508] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0
<14>[    1.515549] fs_mgr: Running /system/bin/fsck.f2fs -f /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
<14>[    1.516514] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory
<14>[    1.516551] fsck.f2fs: fsck.f2fs terminated by exit(255)
<14>[    1.516800] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=f2fs)=-1
<4>[    1.517161] EXT4-fs (mmcblk0p12): Ignoring removed nomblk_io_submit option
<4>[    1.518839] wifi_platform_bus_enumerate device present 1
<4>[    1.518848] ======== Card detection to detect SDIO card! ========
<6>[    1.518855] mmc2:mmc host rescan start!
<6>[    1.608275] EXT4-fs (mmcblk0p12): recovery complete
<6>[    1.608742] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    1.608764] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
<14>[    1.608827] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,/data,ext4)=0
<14>[    1.610420] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
<14>[    1.616731] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[    1.616768] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata: clean, 2513/65536 files, 139561/262144 blocks
<6>[    1.622959] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic
<7>[    1.622982] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
<14>[    1.623020] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0
<11>[    1.623037] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata on /data with fs_type=ext4 instead of f2fs
<7>[    1.623691] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<6>[    1.643943] arm_release_ver of this mali_ko is 'r6p0-02rel0', rk_ko_ver is '13', built at '09:15:10', on 'Oct 22 2015'.
<6>[    1.644018] mali ffa30000.gpu: Continuing without Mali clock control
<4>[    1.644055] mali pd enabled
<4>[    1.644064] clk enabled
<4>[    1.646926] MALI_DVFS_STEP = 5, div_dvfs = 7
<6>[    1.646937] mali_dvfs_infotbl[0].clock=99000,min_threshold=0,max_threshold=70
<6>[    1.646946] mali_dvfs_infotbl[1].clock=198000,min_threshold=65,max_threshold=77
<6>[    1.646954] mali_dvfs_infotbl[2].clock=297000,min_threshold=75,max_threshold=84
<6>[    1.646961] mali_dvfs_infotbl[3].clock=417000,min_threshold=82,max_threshold=91
<6>[    1.646969] mali_dvfs_infotbl[4].clock=480000,min_threshold=94,max_threshold=100
<6>[    1.647075] gpufreq_input_connect
<3>[    1.647085] turn on mali power
<6>[    1.647093] kbase_platform_rk_init,register_reboot_notifier
<4>[    1.647136] hrtimer: interrupt took 12250 ns
<6>[    1.647239] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
<6>[    1.648030] mali ffa30000.gpu: Probed as mali0
<3>[    1.649362] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
<3>[    1.650304] rk29_ipp: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
<3>[    1.651193] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
<6>[    1.652184] zram0: detected capacity change from 0 to 533413888
<6>[    1.731009] Adding 520908k swap on /dev/block/zram0.  Priority:-1 extents:1 across:520908k SS
<4>[    1.735326] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
<3>[    1.767096] EXT4-fs (mmcblk0p12): Unrecognized mount option "background_gc=on" or missing value
<4>[    1.771859] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[    1.773374] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[    1.774905] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[    1.777626] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
<14>[    1.786655] bat_cap: oldcap path is /sys/devices/ff100000.adc
<11>[    1.786701] bat_cap: oldcap_path no exist
<6>[    1.786858] binder: 137:137 transaction failed 29189, size 0-0
<11>[    1.787358] init: Warning!  Service displayd needs a SELinux domain defined; please fix!
<11>[    1.791250] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<11>[    1.791270] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<11>[    1.791491] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
<6>[    1.791983] rtk_btusb: btchr_open: BT usb char device is opening
<3>[    1.791995] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
<6>[    1.792009] rtk_btusb: btchr_open: BT usb char device is opening
<3>[    1.792016] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
<6>[    1.792036] rtk_btusb: btchr_open: BT usb char device is opening
<3>[    1.792043] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
<6>[    1.792057] rtk_btusb: btchr_open: BT usb char device is opening
<3>[    1.792064] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
<11>[    1.831868] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
<6>[    1.832266] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
<4>[    1.832290] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
<4>[    1.832357] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc2]
<11>[    1.833955] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
<11>[    1.834415] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
<11>[    1.834638] init: Warning!  Service drmservice needs a SELinux domain defined; please fix!
<4>[    1.835262] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
<6>[    1.835291] mmc2: new high speed SDIO card at address 0001
<11>[    1.839630] init: Warning!  Service daemonsu needs a SELinux domain defined; please fix!
<11>[    1.839942] init: cannot find '/system/bin/akmd', disabling 'akmd'
<5>[    1.840002] type=1400 audit(1470041405.130:3): avc:  denied  { execute_no_trans } for  pid=152 comm="init" path="/system/xbin/su" dev="mmcblk0p10" ino=1871 scontext=u:r:init:s0 tcontext=u:object_r:su_exec:s0 tclass=file permissive=1
<4>[    1.851544] bcmsdh_register: register client driver
<4>[    1.851674] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
<4>[    1.851759] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
<4>[    1.851768] bus num (host idx)=2, slot num (rca)=1
<4>[    1.851775] found adapter info 'DHD generic adapter'
<4>[    1.852021] F1 signature read @0x18000000=0x16224335
<4>[    1.854173] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
<4>[    1.854488] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[    1.854540] wifi_platform_get_mac_addr
<4>[    1.854548] ======== bcm_wlan_get_mac_address ========
<6>[    1.854555] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
<6>[    1.854564] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
<6>[    1.854571] [WLAN_RFKILL]: This mac address is not valid, ignored...
<4>[    1.854580] dhd_conf_set_chiprev: chip=0x4339, chiprev=1
<4>[    1.854624] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txt
<4>[    1.855234] wl_create_event_handler(): thread:wl_event_handler:9a started
<4>[    1.855240] tsk Enter, tsk = 0xdd60149c
<4>[    1.855671] dhd_attach(): thread:dhd_watchdog_thread:9b started
<4>[    1.855725] dhd_attach(): thread:dhd_dpc:9c started
<4>[    1.855739] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
<4>[    1.855778] dhd_attach(): thread:dhd_rxf:9d started
<4>[    1.855791] dhd_deferred_work_init: work queue initialized
<4>[    1.855910] dhdsdio_probe_init: set use_rxchain 1 from config.txt
<4>[    1.861798] Dongle Host Driver, version 1.201.59.4 (r506368)
<4>[    1.861798] Compiled in drivers/net/wireless/bcmdhd on Dec  1 2017 at 11:54:27
<4>[    1.862187] Register interface [wlan0]  MAC: b0:f1:ec:9a:4a:0e
<4>[    1.862187]
<4>[    1.862203] dhd_prot_ioctl : bus is down. we have nothing to do
<4>[    1.862244] bcmsdh_oob_intr_unregister: Enter
<4>[    1.862254] bcmsdh_oob_intr_unregister: irq is not registered
<4>[    1.862267] dhd_txglom_enable: enable 0
<4>[    1.862275] dhd_bus_devreset:  WLAN OFF DONE
<4>[    1.862325] wifi_platform_set_power = 0
<4>[    1.862331] ======== PULL WL_REG_ON LOW! ========
<6>[    1.862339] [WLAN_RFKILL]: rockchip_wifi_power: 0
<6>[    1.961651] [WLAN_RFKILL]: wifi shut off power.
<6>[    1.961668] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
<6>[    1.961684] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
<4>[    1.961746] dhd_module_init: Exit err=0
<7>[    2.018658] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
<38>[    2.418557] logd.auditd: start
<11>[    2.771499] healthd: No charger supplies found
<12>[    2.771516] healthd: No battery devices found
<3>[    2.825740] android_usb: already disabled
<6>[    2.827569] EHCI: rk_ehci_hcd_enable, disable host controller
<4>[    2.827584] dwc_otg_hcd_enable, enable host controller
<6>[    2.828302] read descriptors
<6>[    2.828317] read strings
<4>[    2.828350] pcd_pullup, is_on 1
<4>[    2.930950] Using Buffer DMA mode
<4>[    2.930964] Periodic Transfer Interrupt Enhancement - disabled
<4>[    2.930971] Multiprocessor Interrupt Enhancement - disabled
<4>[    2.930978] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[    2.930984] ^^^^^^^^^^^^^^^^^^Host Mode
<4>[    2.975269] Init: Power Port (0)
<4>[    2.975316] ff540000.usb resume, HPRT0:0x21401
<4>[    3.112989] Indeed it is in host mode hprt0 = 00021501
<6>[    3.290074] usb 3-1: new high-speed USB device number 2 using usb20_host
<4>[    3.290155] Indeed it is in host mode hprt0 = 00001101
<6>[    3.487029] usb 3-1: New USB device found, idVendor=0424, idProduct=2514
<6>[    3.487043] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[    3.487685] hub 3-1:1.0: USB hub found
<6>[    3.487793] hub 3-1:1.0: 4 ports detected
<6>[    3.600097] rk3288-lcdc lcdc0: blank mode:0
<4>[    3.600109] <<-GTP-DEBUG->> [2717]Resume by fb notifier.
<4>[    3.600113] <<-GTP-INFO->> System resume.
<4>[    3.614956] <<-GTP-INFO->> GTP wakeup sleep.
<4>[    3.654284] <<-GTP-INFO->> Driver send config.
<6>[    3.762537] usb 3-1.2: new full-speed USB device number 3 using usb20_host
<6>[    3.862980] usb 3-1.2: New USB device found, idVendor=1394, idProduct=5268
<6>[    3.862995] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    3.863008] usb 3-1.2: Product: CX20805
<6>[    3.863016] usb 3-1.2: Manufacturer: Conexant Systems
<6>[    3.863023] usb 3-1.2: SerialNumber: 000000000000
<6>[    5.302261] warning: `system_server' uses 32-bit capabilities (legacy support in use)
<4>[    6.629906] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[    6.629933] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[    6.629942] D1:camsys_open(739): camsys_marvin(deb7de10) is opened!
<4>[    6.630059] D1:camsys_extdev_register(243): Get RK30_PIN8_PA0(256) gpio(active: 0) for dev_id 0x4000000 success!
<4>[    6.630075] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x4000000 success!
<7>[    6.630095] of_get_named_gpio_flags exited with status 237
<7>[    6.630103] of_get_named_gpio_flags exited with status 237
<7>[    6.630110] _gpio_request: gpio-237 (camsys_gpio) status -16
<4>[    6.630118] rockchip_gpio_set:GPIO7-13 level = 1
<4>[    6.630125] rockchip_gpio_direction_output:set GPIO7-13 level 1
<4>[    6.630136] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x8205
<4>[    6.630146] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x20201c,result=0x20201c
<4>[    6.630157] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
<4>[    6.630180] D1:camsys_extdev_register(268): Extdev(dev_id: 0x4000000  dev_name: OV13850) register success
<4>[    6.636470] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
<4>[    6.636482] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[    6.636588] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[    6.636634] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 12000000Hz) turn on
<4>[    6.637710] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
<4>[    6.638776] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(256) set 1
<3>[    6.639837] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<3>[    6.642444] E:camsys_ioctl(1028): iommu status not consistent,check the dts file ! isp:1,vpu:0
<3>[    6.643581] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<4>[    6.643600] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(256) set 0
<4>[    6.643613] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
<4>[    6.652961] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
<4>[    6.653004] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
<4>[    6.655121] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
<4>[    6.655138] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[    6.655146] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[    6.655154] D1:camsys_release(763): camsys_marvin(deb7de10) is closed
<6>[    8.731584] [otg id chg] last id -1 current id 1
<4>[    8.731612] PortPower off
<4>[    8.731621] rk_battery_charger_detect_cb , battery_charger_detect 6
<4>[    8.850637] Using Buffer DMA mode
<4>[    8.850663] Periodic Transfer Interrupt Enhancement - disabled
<4>[    8.850671] Multiprocessor Interrupt Enhancement - disabled
<4>[    8.850678] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[    8.850684] ^^^^^^^^^^^^^^^^^Device Mode
<4>[    9.341658] ***************vbus detect*****************
<4>[    9.343856] rk_battery_charger_detect_cb , battery_charger_detect 1
<4>[    9.533824] Using Buffer DMA mode
<4>[    9.533851] Periodic Transfer Interrupt Enhancement - disabled
<4>[    9.533859] Multiprocessor Interrupt Enhancement - disabled
<4>[    9.533867] OTG VER PARAM: 0, OTG VER FLAG: 0
<4>[    9.533874] ^^^^^^^^^^^^^^^^^Device Mode
<4>[    9.533917] *******************soft connect!!!*******************
<4>[    9.656454] USB RESET
<6>[    9.766873] android_work: sent uevent USB_STATE=CONNECTED
<4>[    9.770267] USB RESET
<6>[    9.894444] android_usb gadget: high-speed config #1: android
<6>[    9.901275] android_work: sent uevent USB_STATE=CONFIGURED
<4>[   10.522575] test : set_clk_later_work
<12>[   15.335605] healthd: battery none chg=
<6>[   15.672328] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[   15.672354] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[   15.672361] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[   15.672368] lowmemorykiller: oom_adj 2 => oom_score_adj 117
<6>[   15.672374] lowmemorykiller: oom_adj 3 => oom_score_adj 176
<6>[   15.672380] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[   15.672386] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<6>[   16.579796] acc_open
<6>[   16.579828] acc_release
<4>[   17.803425] phy_power_on: enable = 1
<4>[   17.842835] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
<4>[   17.842882] eth0: device MAC address 8e:c5:93:7c:92:31
<6>[   17.846504] libphy: stmmac: probed
<4>[   17.846514] eth0: No PHY found
<4>[   18.206055] dwc_otg_hcd_resume, usb device mode
<4>[   18.257897] Current WiFi chip is AP6210.
<4>[   18.257976] Current WiFi chip is AP6210.
<4>[   18.281742] Current WiFi chip is AP6210.
<4>[   18.306090] dwc_otg_hcd_suspend, usb device mode
<4>[   18.615838] dhd_open: Enter de88e800
<4>[   18.615862]
<4>[   18.615862] Dongle Host Driver, version 1.201.59.4 (r506368)
<4>[   18.615862] Compiled in drivers/net/wireless/bcmdhd on Dec  1 2017 at 11:54:27
<4>[   18.615884] wl_android_wifi_on in 1
<4>[   18.615892] wl_android_wifi_on in 2: g_wifi_on=0
<4>[   18.615900] wifi_platform_set_power = 1
<4>[   18.615905] ======== PULL WL_REG_ON HIGH! ========
<6>[   18.615913] [WLAN_RFKILL]: rockchip_wifi_power: 1
<6>[   18.615921] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
<6>[   18.615927] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
<6>[   18.719188] [WLAN_RFKILL]: wifi turn on power. 156
<4>[   18.925826] sdio_reset_comm():
<6>[   18.928977] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
<4>[   18.928999] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
<4>[   18.958317] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[   18.961328] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[   18.964331] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[   18.969751] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
<6>[   19.074764] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
<4>[   19.074810] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
<4>[   19.075115]
<4>[   19.075115]
<4>[   19.075115] dhd_bus_devreset: == WLAN ON ==
<4>[   19.075195] F1 signature read @0x18000000=0x16224335
<4>[   19.077464] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
<4>[   19.077853] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[   19.078000] dhdsdio_probe_init: set use_rxchain 1 from config.txt
<4>[   19.078536] dhd_conf_read_config: Ignore config file /system/etc/firmware/config.txt
<4>[   19.078551] dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_bcm4339a0_ag.bin,nv_path=/system/etc/firmware/nvram_AP6335.txt
<4>[   19.078560] Final fw_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
<4>[   19.078566] Final nv_path=/system/etc/firmware/nvram_AP6335.txt
<4>[   19.078572] Final conf_path=/system/etc/firmware/config.txt
<4>[   19.222509] NVRAM version: AP6335_NVRAM_V1.7_04102014
<4>[   19.223137] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[   19.395749] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<4>[   19.404514] bcmsdh_oob_intr_register: Enter
<4>[   19.404528] bcmsdh_oob_intr_register: HW_OOB enabled
<4>[   19.404535] bcmsdh_oob_intr_register OOB irq=198 flags=4
<4>[   19.404605] bcmsdh_oob_intr_register: enable_irq_wake
<4>[   19.405810] dhd_conf_set_band: Set band 0
<4>[   19.405947] wifi_platform_get_mac_addr
<4>[   19.405956] ======== bcm_wlan_get_mac_address ========
<6>[   19.405963] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
<6>[   19.405974] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
<6>[   19.405980] [WLAN_RFKILL]: This mac address is not valid, ignored...
<4>[   19.415398] Firmware up: op_mode=0x0005, MAC=b0:f1:ec:9a:4a:0e
<4>[   19.415419] dhd_conf_set_country: Set country CN, revision 38
<4>[   19.460553] Country code: CN (CN/38)
<4>[   19.460759] dhd_conf_set_roam: Set roam_off 1
<4>[   19.462605] dhd_conf_set_txbf: set txbf 1
<4>[   19.469964] Firmware version = wl0: Apr  3 2014 12:12:42 version 6.37.32.28.2_ip (r424058)
<4>[   19.469982]   Driver: 1.201.59.4 (r506368)
<4>[   19.469982]   Firmware: wl0: Apr  3 2014 12:12:42 version 6.37.32.28.2_ip (r424058)
<4>[   19.470170] dhd_txglom_enable: enable 1
<4>[   19.470179] dhd_conf_set_disable_proptx: set disable_proptx 0
<4>[   19.471223] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
<4>[   19.474051] wl_android_wifi_on: Success
<4>[   19.530424] dhd_open: Exit ret=0
<6>[   19.605507] pm policy 0 -> 1
<4>[   19.646085] WLC_E_IF: NO_IF set, event Ignored
<4>[   19.994755] Current WiFi chip is AP6210.
<4>[   20.013877] dhd_pktfilter_offload_set: failed to add pktfilter 102 0 0 0 0xFFFFFF 0x01005E, retcode = -2
<38>[   20.019181] type=1400 audit(1470041423.610:4): avc: denied { write } for pid=829 comm="droid.launcher3" name="property_service" dev="tmpfs" ino=2328 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
<38>[   20.019357] type=1400 audit(1470041423.610:5): avc: denied { connectto } for pid=829 comm="droid.launcher3" path="/dev/socket/property_service" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
<12>[   20.019407] avc:  denied  { set } for property=persist.sys.default_launcher scontext=u:r:untrusted_app:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service
<4>[   20.383086] FAT-fs (mmcblk0p14): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<7>[   20.383160] SELinux: initialized (dev mmcblk0p14, type vfat), uses genfs_contexts
<11>[   20.654184] init: no such service 'fuse_internal_sd'
<4>[   20.820312] dhd_set_suspend: Remove extra suspend setting
<4>[   22.456065] Connectting with 04:5f:a7:63:95:c4 channel (6) ssid "JCG-6395C4", len (10)
<4>[   22.456065]
<4>[   22.556540] wl_iw_event: Link UP with BSSID=04:5F:00:00:95:C4
<4>[   22.564353] wl_bss_connect_done succeeded with 04:5f:a7:63:95:c4
<4>[   22.577815] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[   22.577836] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[   22.577845] D1:camsys_open(739): camsys_marvin(deb7de10) is opened!
<3>[   22.578008] E:camsys_ioctl(1028): iommu status not consistent,check the dts file ! isp:1,vpu:0
<4>[   22.581570] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 420000000 Hz) in turn on
<4>[   22.581591] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[   22.581697] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[   22.581719] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[   22.582082] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[   22.584138] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[   22.584651] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
<3>[   22.584737] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<4>[   22.584828] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(256) set 0
<3>[   22.585892] E:camsys_sysctl_extdev(367): Sysctl 9 failed, because gpio is NULL!
<3>[   22.585904] E:camsys_sysctl_extdev(367): Sysctl 10 failed, because gpio is NULL!
<4>[   22.586007] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
<3>[   22.586090] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<4>[   22.586175] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(256) set 0
<3>[   22.587252] E:camsys_sysctl_extdev(367): Sysctl 9 failed, because gpio is NULL!
<3>[   22.587265] E:camsys_sysctl_extdev(367): Sysctl 10 failed, because gpio is NULL!
<4>[   22.587306] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 12000000Hz) turn on
<4>[   22.587402] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
<3>[   22.587489] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<4>[   22.587583] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(256) set 1
<3>[   22.588665] E:camsys_sysctl_extdev(367): Sysctl 9 failed, because gpio is NULL!
<3>[   22.588679] E:camsys_sysctl_extdev(367): Sysctl 10 failed, because gpio is NULL!
<4>[   22.663055] wl_bss_connect_done succeeded with 04:5f:a7:63:95:c4
<4>[   22.902126] D1:camsys_rk3288_mipihpy_cfg(104): mipi phy 0 standby!
<3>[   22.902147] W:camsys_phy_ops(478): mipiphy->phy_index(-1222708204) != extdev->phy.info.mipi.phy_index(0)!
<4>[   22.902356] D1:camsys_rk3288_mipihpy_cfg(219): mipi phy(0) turn on(lane: 0x3  bit_rate: 600Mbps)
<4>[   22.996038] dhd_set_suspend: Remove extra suspend setting
<4>[   23.007361] dhd_pno_get_for_batch : wifi location service is not supported
<3>[   23.007382] ANDROID-ERROR) failed to getting batching results
<4>[   23.007853] dhd_pno_stop_for_batch : wifi location service is not supported
<4>[   23.007866] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
<4>[   23.007873] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
<3>[   23.007879] ANDROID-ERROR) failed to stop batching scan
<4>[   23.008858] D1:camsys_rk3288_mipihpy_cfg(104): mipi phy 0 standby!
<4>[   23.020038] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
<4>[   23.020138] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
<3>[   23.020221] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<4>[   23.020306] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(256) set 0
<3>[   23.021365] E:camsys_sysctl_extdev(367): Sysctl 9 failed, because gpio is NULL!
<3>[   23.021376] E:camsys_sysctl_extdev(367): Sysctl 10 failed, because gpio is NULL!
<4>[   23.024605] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
<4>[   23.024709] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
<3>[   23.024790] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<4>[   23.024999] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(256) set 0
<3>[   23.026081] E:camsys_sysctl_extdev(367): Sysctl 9 failed, because gpio is NULL!
<3>[   23.026097] E:camsys_sysctl_extdev(367): Sysctl 10 failed, because gpio is NULL!
<4>[   23.026140] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
<4>[   23.026154] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[   23.026162] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[   23.026169] D1:camsys_release(763): camsys_marvin(deb7de10) is closed
<4>[   25.538545] dhd_tcpdata_info_get 1037: Add data info to tbl[0]: IP addr 183.36.108.241 192.168.2.109 TCP port 443 59897
<4>[   26.107052] dhd_tcpdata_info_get 1037: Add data info to tbl[1]: IP addr 183.61.49.155 192.168.2.109 TCP port 8080 54693
<4>[   26.140877] dhd_tcpdata_info_get 1037: Add data info to tbl[2]: IP addr 183.61.51.17 192.168.2.109 TCP port 80 50617
<4>[   26.767564] dhd_tcpdata_info_get 1037: Add data info to tbl[3]: IP addr 183.36.108.182 192.168.2.109 TCP port 8080 33586
<6>[   31.634777] binder: 1328:1328 transaction failed 29189, size 64-0
<4>[   31.761003] dhd_tcpdata_info_get 1003: tcpdata_info(idx 1) is aged out. ttl cnt is now 3
<4>[   31.761029] dhd_tcpdata_info_get 1003: tcpdata_info(idx 1) is aged out. ttl cnt is now 2
<4>[   31.761038] dhd_tcpdata_info_get 1003: tcpdata_info(idx 1) is aged out. ttl cnt is now 1
<4>[   31.761048] dhd_tcpdata_info_get 1037: Add data info to tbl[1]: IP addr 120.76.133.10 192.168.2.109 TCP port 80 41066
<4>[   31.833937] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[   31.833965] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
<4>[   31.833975] D1:camsys_open(739): camsys_marvin(deb7de10) is opened!
<4>[   31.850200] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
<4>[   31.850215] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
<4>[   31.850324] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
<4>[   31.850365] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 12000000Hz) turn on
<4>[   31.851450] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
<4>[   31.852521] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(256) set 1
<3>[   31.853589] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<3>[   31.856200] E:camsys_ioctl(1028): iommu status not consistent,check the dts file ! isp:1,vpu:0
<3>[   31.857357] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
<4>[   31.857376] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(256) set 0
<4>[   31.857389] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
<4>[   31.866687] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
<4>[   31.866736] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
<4>[   31.868811] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
<4>[   31.868830] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[   31.868845] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
<4>[   31.868853] D1:camsys_release(763): camsys_marvin(deb7de10) is closed
<4>[   39.617511] dhd_tcpdata_info_get 1003: tcpdata_info(idx 1) is aged out. ttl cnt is now 1
<4>[   39.617541] dhd_tcpdata_info_get 1037: Add data info to tbl[1]: IP addr 59.37.96.226 192.168.2.109 TCP port 443 37586
<4>[   40.024668] dhd_tcpdata_info_get 1037: Add data info to tbl[2]: IP addr 183.61.38.230 192.168.2.109 TCP port 443 57103
<4>[   40.027825] dhd_tcpdata_info_get 1037: Add data info to tbl[3]: IP addr 183.61.38.189 192.168.2.109 TCP port 8080 49749
<4>[   47.288783] dhd_tcpdata_info_get 1003: tcpdata_info(idx 1) is aged out. ttl cnt is now 3
<4>[   47.288814] dhd_tcpdata_info_get 1003: tcpdata_info(idx 1) is aged out. ttl cnt is now 2
<4>[   47.288825] dhd_tcpdata_info_get 1003: tcpdata_info(idx 1) is aged out. ttl cnt is now 1
<4>[   47.288837] dhd_tcpdata_info_get 1037: Add data info to tbl[1]: IP addr 59.37.116.32 192.168.2.109 TCP port 80 54524
<4>[   48.507523] dhd_tcpdata_info_get 1037: Add data info to tbl[2]: IP addr 183.61.38.179 192.168.2.109 TCP port 80 59155
<4>[   48.637466] dhd_tcpdata_info_get 1037: Add data info to tbl[3]: IP addr 14.17.32.188 192.168.2.109 TCP port 80 55097


回复

使用道具 举报

*滑块验证:
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表