Firefly开源社区

打印 上一主题 下一主题

[技术讨论] Firefly-RK3288采用SD卡方式无法启动

25

积分

0

威望

0

贡献

技术小白

积分
25

Firefly-RK3288采用SD卡方式无法启动

发表于 2020-10-31 16:14:53      浏览:7309 | 回复:2        打印      只看该作者   [复制链接] 楼主
  使用SD卡按照步骤将Ununtu16镜像烧写到SD卡后,插入SD卡启动后报错。请问这种问题是怎么导致的呢?该怎么解决呢?
  1. DDR Version 1.06 20171020
  2. In
  3. Channel a: DDR3 400MHz
  4. Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
  5. Channel b: DDR3 400MHz
  6. Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
  7. Memory OK
  8. Memory OK
  9. OUT
  10. Boot1 Release Time: Apr 11 2018 10:32:58, version: 2.36
  11. ChipType = 0x8, 227
  12. mmc2:cmd19,256
  13. SdmmcInit=2 0
  14. BootCapSize=2000
  15. UserCapSize=29820MB
  16. FwPartOffset=2000 , 2000
  17. mmc0:cmd5,32
  18. SdmmcInit=0 0
  19. BootCapSize=0
  20. UserCapSize=29566MB
  21. FwPartOffset=2000 , 0
  22. run on sd0
  23. StorageInit ok = 116413
  24. LOADER Check OK! 0x0, 179054
  25. TOS    Check OK! 0x8400000, 253733
  26. Enter Trust OS
  27. INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-316-g7b4ec90 #59 Wed May 30 08:26:33 UTC 2018 arm)

  28. INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 1.3

  29. INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x0

  30. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


  31. U-Boot 2017.09-g3947e40 (Feb 19 2019 - 10:20:55 +0800)

  32. Model: Firefly-RK3288
  33. DRAM:  4 GiB
  34. Relocation Offset is: fbe54000
  35. *** Warning - No MMC card found, using default environment

  36. dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
  37. switch to partitions #0, OK
  38. mmc1 is current device
  39. do_rkimg_test found IDB in SDcard
  40. Boot from SDcard
  41. boot mode: None
  42. DTB: rk-kernel.dtb
  43. Using kernel dtb
  44. vdd_log 1100000 uV
  45. Can't get mcu-pix-total
  46. Warn: can't find phy driver
  47. In:    serial@ff690000
  48. Out:   serial@ff690000
  49. Err:   serial@ff690000
  50. Model: Firefly-RK3288 Board (Linux Opensource)
  51. failed to display uboot logo
  52. Net:   No ethernet found.
  53. Unknown command 'usb' - try 'help'
  54. Hit any key to stop autoboot:  0
  55. android_bootloader_boot_flow Could not find misc partition
  56. Could not read from misc partition
  57. WARNING: Unable to load the BCB.
  58. ANDROID: reboot reason: "(none)"
  59. android_bootloader_boot_flow boot part load fail
  60. Android boot failed, error -1.
  61. =Booting Rockchip format image=
  62. boot_rockchip_image kernel or boot part info error
  63. switch to partitions #0, OK
  64. mmc1 is current device
  65. ** fs_devread read error - block
  66. Failed to mount ext2 filesystem...
  67. ** Unrecognized filesystem type **
  68. switch to partitions #0, OK
  69. mmc0(part 0) is current device
  70. Failed to mount ext2 filesystem...
  71. ** Unrecognized filesystem type **
  72. No ethernet found.
  73. missing environment variable: pxeuuid
  74. missing environment variable: bootfile
  75. Retrieving file: pxelinux.cfg/00000000
  76. No ethernet found.
  77. missing environment variable: bootfile
  78. Retrieving file: pxelinux.cfg/0000000
  79. No ethernet found.
  80. missing environment variable: bootfile
  81. Retrieving file: pxelinux.cfg/000000
  82. No ethernet found.
  83. missing environment variable: bootfile
  84. Retrieving file: pxelinux.cfg/00000
  85. No ethernet found.
  86. missing environment variable: bootfile
  87. Retrieving file: pxelinux.cfg/0000
  88. No ethernet found.
  89. missing environment variable: bootfile
  90. Retrieving file: pxelinux.cfg/000
  91. No ethernet found.
  92. missing environment variable: bootfile
  93. Retrieving file: pxelinux.cfg/00
  94. No ethernet found.
  95. missing environment variable: bootfile
  96. Retrieving file: pxelinux.cfg/0
  97. No ethernet found.
  98. missing environment variable: bootfile
  99. Retrieving file: pxelinux.cfg/default-arm-rockchip
  100. No ethernet found.
  101. missing environment variable: bootfile
  102. Retrieving file: pxelinux.cfg/default-arm
  103. No ethernet found.
  104. missing environment variable: bootfile
  105. Retrieving file: pxelinux.cfg/default
  106. No ethernet found.
  107. Config file not found
  108. No ethernet found.
  109. No ethernet found.
  110. =>
复制代码
回复

使用道具 举报

16

积分

0

威望

0

贡献

技术小白

积分
16
发表于 2020-10-31 18:31:34        只看该作者  沙发
也遇到这个问题,你解决了吗
回复

使用道具 举报

25

积分

0

威望

0

贡献

技术小白

积分
25
发表于 2020-11-1 09:51:50        只看该作者  板凳
okjackli 发表于 2020-10-31 18:31
也遇到这个问题,你解决了吗

换成官网的镜像后解决了
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表