【AIO-3399-JD4】sdk编译ubuntu16.04，img烧写不正常

sunshuai1900

按照wiki，下载官网的ubuntu16.04镜像，放入sdk指定路径下，修改配置文件，并执行build.sh aio-3399-jd4-ubuntu.mk。将生成的整体固件，烧写到开发板后，报如下错误。

1. [    4.600589] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
   
2. [    4.601196] dhd_bus_devreset:  WLAN OFF DONE
   
3. [    4.602408] wifi_platform_set_power = 0
   
4. [    4.602785] ======== PULL WL_REG_ON(-1) LOW! ========
   
5. OK[    4.603232] [WLAN_RFKILL]: rockchip_wifi_power: 0
   
6. 
   
7. [    4.603680] [WLAN_RFKILL]: wifi shut off power.
   
8. [    4.604082] dhdsdio_probe : the lock is released.
   
9. [    4.604757] dhd_module_init: Exit err=0
   
10. Debug: configfs_init
    
11. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gs0': No such file or directory
    
12. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory
    
13. [    4.627810] file system registered
    
14. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory
    
15. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/rndis.gs0': No such file or directory
    
16. [    4.637183] Mass Storage Function, version: 2009/09/11
    
17. [    4.637685] LUN: removable file: (no medium)
    
18. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uvc.gs6': No such file or directory
    
19. [    4.658878] read descriptors
    
20. [    4.659143] read strings
    
21. sh: write error: No such device
    
22. Starting input-event-daemon: input-event-daemon: Start parsing /etc/input-event-daemon.conf...
    
23. input-event-daemon: Adding device: /dev/input/event0...
    
24. input-event-daemon: Adding device: /dev/input/event1...
    
25. input-event-daemon: Adding device: /dev/input/event2...
    
26. input-event-daemon: Start listening on 3 devices...
    
27. done
    
28. /etc/init.d/rcS: line 28: alsactl: not found
    
29. [root@buildroot:/]# rotate degree: 0 - none, 1 - right, 2 - down, 3 - left.
    
30. current rotate degree is : 0
    
31. Ui upgrade
    
32. recovery filesystem table
    
33. =========================
    
34.   0 (null) /tmp ramdisk (null) (null) (null)
    
35.   1 /dev/root / ext2 rw,noauto 0 1
    
36.   2 proc /proc proc defaults 0 0
    
37.   3 devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
    
38.   4 tmpfs /dev/shm tmpfs mode=0777 0 0
    
39.   5 tmpfs /tmp tmpfs mode=1777 0 0
    
40.   6 tmpfs /run tmpfs mode=0755,nosuid,nodev 0 0
    
41.   7 sysfs /sys sysfs defaults 0 0
    
42.   8 debug /sys/kernel/debug debugfs defaults 0 0
    
43.   9 pstore /sys/fs/pstore pstore defaults 0 0
    
44.   10 /dev/block/by-name/misc /misc emmc defaults 0 0
    
45.   11 /dev/block/by-name/oem /oem ext2 defaults 0 2
    
46.   12 /dev/block/by-name/userdata /userdata ext4 defaults 0 2
    
47. 
    
48. buf = /dev/block/by-name/misc
    
49. ### get mount_ponit = /dev/block/by-name/misc ###
    
50. emmc_point is /dev/mmcblk1
    
51. sd_point is (null)
    
52. sd_point_2 is (null)
    
53. Recovery start....................
    
54. read cmdline
    
55. >>> Boot from non-SDcard
    
56. buf = /dev/block/by-name/misc
    
57. ### get mount_ponit = /dev/block/by-name/misc ###
    
58. devices is not MTD.
    
59. I:Boot command: boot-recovery
    
60. I:Got arguments from boot message
    
61. buf = /dev/block/by-name/misc
    
62. ### get mount_ponit = /dev/block/by-name/misc ###
    
63. devices is not MTD.
    
64. Command: "recovery" "--wipe_all"
    
65. 
    
66. 
    
67. Formatting /userdata...
    
68. No link to path!!!
    
69. No link to path!!!
    
70. format '/dev/block/by-name/userdata' to ext4 filesystem
    
71. executing '/sbin/mke2fs'
    
72. [    8.202692] random: nonblocking pool is initialized
    

复制代码

过几十秒后会自动重启，之后一直打印：
[   11.473465] mali ff9a0000.gpu: Stride passed to job_submit doesn't match kernel

同时HDMI也无输出。

有遇见过的么？？？

sunshuai1900

另外，使用配套资料里面的：AIO-3399-JD4\固件\Ubuntu\ubuntu18.04\Public\*.img，一切正常，HDMI也正常。硬件上应该没有问题