|
重新烧写uboot后无法启动
发表于 2019-5-4 22:50:48
浏览:2722
|
回复:1
打印
只看该作者
[复制链接]
楼主
emmc换了一片,想试试完全空白的emmc能不能启动成功。
自己编译了整个系统镜像,在原来的emmc上擦除后用maskrom模式下载,可以启动成功。
换了一片emmc后,下载成功。但无法进入界面。
命令行打印如下:- DDR Version 1.17 20190115
- In
- Channel 0: DDR3, 800MHz
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- Channel 1: DDR3, 800MHz
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- 256B stride
- ch 0 ddrconfig = 0x101, ddrsize = 0x20
- ch 1 ddrconfig = 0x101, ddrsize = 0x20
- pmugrf_os_reg[2] = 0x32817281, stride = 0x9
- OUT
- Boot1: 2017-06-09, version: 1.09
- CPUId = 0x0
- ChipType = 0x10, 1827
- SdmmcInit=2 0
- BootCapSize=100000
- UserCapSize=14910MB
- FwPartOffset=2000 , 100000
- SdmmcInit=0 20
- StorageInit ok = 66565
- LoadTrustBL
- No find bl30.bin
- Load uboot, ReadLba = 2000
- Load OK, addr=0x200000, size=0x7a274
- RunBL31 0x10000
- NOTICE: BL31: v1.3(debug):2bb878d
- NOTICE: BL31: Built : 11:57:30, Jan 4 2019
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1181): pd status 3e
- INFO: BL31: Initializing runtime services
- INFO: BL31: Initializing BL32
- INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64)
- INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
- INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2014.10-RK3399-06 (Apr 22 2019 - 21:09:02)
- CPU: rk3399
- cpu version = 0
- CPU's clock information:
- aplll = 816000000HZ
- apllb = 24000000HZ
- gpll = 800000000HZ
- aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
- aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
- hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
- cpll = 800000000HZ
- dpll = 800000000HZ
- vpll = 24000000HZ
- npll = 24000000HZ
- ppll = 676000000HZ
- Board: Rockchip platform Board
- Uboot as second level loader
- DRAM: Found dram banks: 1
- Adding bank:0000000000200000(000000007fe00000)
- Reserve memory for trust os.
- dram reserve bank: base = 0x08400000, size = 0x01e00000
- 128 MiB
- SdmmcInit = 0 20
- storage init OK!
- Using default environment
- GetParam
- remotectl v0.1
- pwm freq=0xb8320
- pwm_freq_nstime=0x52d
- Load FDT from resource image.
- power key: bank-0 pin-5
- can't find dts node for fixed
- usb bc: can find node by path: /dwc-control-usb/usb_bc
- dwc_otg_check_dpdm: usb bc disconnected
- pmic:rk808
- can't find dts node for pwm1
- set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
- CPU's clock information:
- aplll = 816000000HZ
- apllb = 24000000HZ
- gpll = 800000000HZ
- aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
- aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
- hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
- cpll = 800000000HZ
- dpll = 800000000HZ
- vpll = 24000000HZ
- npll = 24000000HZ
- ppll = 676000000HZ
- SecureBootEn = 0, SecureBootLock = 0
- #Boot ver: 2019-04-22#1.09
- empty serial no.
- normal boot.
- checkKey
- vbus = 0
- board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
- no fuel gauge found
- no fuel gauge found
- failed to find phy node
- read logo on state from dts [1]
- no fuel gauge found
- Using display timing dts
- Detailed mode clock 150000 kHz, flags[a]
- H: 1920 2202 2212 2222
- V: 1080 1090 1100 1125
- bus_format: 100e
- rk lcdc - 0 dclk set: dclk = 150000000HZ, pll select = 1, div = 1
- final DSI-Link bandwidth: 1000 Mbps x 4
- failed to wait for phy clk lane stop state
- ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
- failed to display kernel logo
- checkKey
- vbus = 0
- board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
- got recovery cmd from misc.
- load fdt from resouce.
- vendor read error!
- Set oem_unlocked=0Secure Boot state: 0
- kernel @ 0x00280000 (0x0125a008)
- ramdisk @ 0x04bf0000 (0x007b1848)
- bootrk: do_bootm_linux...
- Loading Device Tree to 0000000004600000, end 0000000004616f78 ... OK
- Add bank:0000000000200000, 0000000008200000
- Add bank:000000000a200000, 0000000075e00000
- WARNING: could not set reg FDT_ERR_BADOFFSET.
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Initializing cgroup subsys schedtune
- [ 0.000000] Linux version 4.4.103 (xin@xin-virtual-machine) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Apr 21 22:09:08 CST 2019
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
- [ 0.000000] bootconsole [uart0] enabled
- [ 0.000000] hdmi init vic is -1
- [ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
- [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef5000 s45504 r8192 d32320 u86016
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 507912
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00010000@0x0002C000(recovery),0x00038000@0x0003C000(backup),0x00040000@0x00074000(cache),0x00300000@0x000B4000(system),0x00008000@0x003B4000(metadata),0x00002000@0x003BC000(baseparamer),-@0x003BE000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2019-04-22_21:09:02 hdmi.vic=-1 SecureBootCheckOk=0
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] software IO TLB [mem 0x7eead000-0x7eeed000] (0MB) mapped at [ffffffc07eead000-ffffffc07eeecfff]
- [ 0.000000] Memory: 1982412K/2064384K available (11006K kernel code, 1640K rwdata, 5256K rodata, 832K init, 1073K bss, 65588K reserved, 16384K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
- [ 0.000000] .init : 0xffffff8009070000 - 0xffffff8009140000 ( 832 KB)
- [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008b40000 ( 11008 KB)
- [ 0.000000] .rodata : 0xffffff8008b40000 - 0xffffff8009070000 ( 5312 KB)
- [ 0.000000] .data : 0xffffff8009140000 - 0xffffff80092da008 ( 1641 KB)
- [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
- [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
- [ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
- [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
- [ 0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x000000000a280000
- [ 0.000000] ITS: Allocated 1792 chunks for LPIs
- [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] CPU0: using LPI pending table @0x000000000a290000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
- [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
- [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
- [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
- [ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.001986] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
- [ 0.002948] pid_max: default: 32768 minimum: 301
- [ 0.003464] Security Framework initialized
- [ 0.003853] SELinux: Initializing.
- [ 0.004265] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.004894] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.006323] Initializing cgroup subsys freezer
- [ 0.006751] Initializing cgroup subsys debug
- [ 0.008070] sched-energy: Sched-energy-costs installed from DT
- [ 0.008620] CPU0: update cpu_capacity 401
- [ 0.009074] ASID allocator initialised with 65536 entries
- [ 0.025900] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
- [ 0.027200] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
- [ 0.039292] Detected VIPT I-cache on CPU1
- [ 0.039325] CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.039359] CPU1: using LPI pending table @0x000000000a3f0000
- [ 0.039402] CPU1: update cpu_capacity 401
- [ 0.039405] CPU1: Booted secondary processor [410fd034]
- [ 0.049286] Detected VIPT I-cache on CPU2
- [ 0.049305] CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.049338] CPU2: using LPI pending table @0x000000007c020000
- [ 0.049366] CPU2: update cpu_capacity 401
- [ 0.049369] CPU2: Booted secondary processor [410fd034]
- [ 0.059323] Detected VIPT I-cache on CPU3
- [ 0.059342] CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.059374] CPU3: using LPI pending table @0x000000007c060000
- [ 0.059401] CPU3: update cpu_capacity 401
- [ 0.059404] CPU3: Booted secondary processor [410fd034]
- [ 0.069373] Detected PIPT I-cache on CPU4
- [ 0.069402] CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.069441] CPU4: using LPI pending table @0x000000007c0a0000
- [ 0.069483] CPU4: update cpu_capacity 1024
- [ 0.069486] CPU4: Booted secondary processor [410fd082]
- [ 0.079396] Detected PIPT I-cache on CPU5
- [ 0.079414] CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.079449] CPU5: using LPI pending table @0x000000007c0e0000
- [ 0.079476] CPU5: update cpu_capacity 1024
- [ 0.079479] CPU5: Booted secondary processor [410fd082]
- [ 0.079564] Brought up 6 CPUs
- [ 0.091666] SMP: Total of 6 processors activated.
- [ 0.092108] CPU features: detected feature: GIC system register CPU interface
- [ 0.092777] CPU: All CPU(s) started at EL2
- [ 0.093200] alternatives: patching kernel code
- [ 0.095287] devtmpfs: initialized
- [ 0.116455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
- [ 0.117416] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.118743] pinctrl core: initialized pinctrl subsystem
- [ 0.120836] Failed to find legacy iommu devices
- [ 0.121650] NET: Registered protocol family 16
- [ 0.122438] schedtune: init normalization constants...
- [ 0.122959] schedtune: CLUSTER[0-3] min_pwr: 56 max_pwr: 222
- [ 0.123593] schedtune: CPU[0] min_pwr: 0 max_pwr: 222
- [ 0.124228] schedtune: CPU[1] min_pwr: 0 max_pwr: 222
- [ 0.124862] schedtune: CPU[2] min_pwr: 0 max_pwr: 222
- [ 0.125495] schedtune: CPU[3] min_pwr: 0 max_pwr: 222
- [ 0.126130] schedtune: CLUSTER[4-5] min_pwr: 65 max_pwr: 1108
- [ 0.126768] schedtune: CPU[4] min_pwr: 0 max_pwr: 1108
- [ 0.127401] schedtune: CPU[5] min_pwr: 0 max_pwr: 1108
- [ 0.128034] schedtune: SYSTEM min_pwr: 121 max_pwr: 4434
- [ 0.128668] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
- [ 0.129408] schedtune: verify normalization constants...
- [ 0.129925] schedtune: max_pwr/2^0: 4313 => norm_pwr: 1024
- [ 0.130471] schedtune: max_pwr/2^1: 2156 => norm_pwr: 511
- [ 0.131012] schedtune: max_pwr/2^2: 1078 => norm_pwr: 255
- [ 0.131552] schedtune: max_pwr/2^3: 539 => norm_pwr: 127
- [ 0.132093] schedtune: max_pwr/2^4: 269 => norm_pwr: 63
- [ 0.132634] schedtune: max_pwr/2^5: 134 => norm_pwr: 31
- [ 0.133175] schedtune: configured to support 5 boost groups
- [ 0.143846] cpuidle: using governor ladder
- [ 0.153848] cpuidle: using governor menu
- [ 0.154241] Registered FIQ tty driver
- [ 0.154922] vdso: 2 pages (1 code @ ffffff8008b46000, 1 data @ ffffff8009144000)
- [ 0.155664] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.157747] DMA: preallocated 2048 KiB pool for atomic allocations
- [ 0.178796] console [pstore0] enabled
- [ 0.179388] pstore: Registered ramoops as persistent store backend
- [ 0.179992] ramoops: attached 0xf0000@0x110000, ecc: 0/0
- [ 0.182851] fiq debugger fiq mode enabled
- [ [ 0.183495] console [ttyFIQ0] enabled
- 0.183495] console [ttyFIQ0] enabled
- [[ 0.184196] bootconsole [uart0] disabled
- 0.184196] bootconsole [uart0] disabled
- [ 0.185105] Registered fiq debugger ttyFIQ0
- [ 0.215225] Rockchip hdmi driver version 2.0
- .
- [ 0.217541] iommu: Adding device ff650000.vpu_service to group 0
- [ 0.217645] iommu: Adding device ff660000.rkvdec to group 1
- [ 0.217713] iommu: Adding device ff670000.iep to group 2
- [ 0.217813] iommu: Adding device ff8f0000.vop to group 3
- [ 0.217895] iommu: Adding device ff900000.vop to group 4
- [ 0.218006] iommu: Adding device ff910000.isp to group 5
- [ 0.218083] iommu: Adding device ff920000.isp to group 6
- [ 0.218763] rk_iommu ff670800.iommu: can't get aclk
- [ 0.218782] rk_iommu ff670800.iommu: can't get hclk
- [ 0.219661] SCSI subsystem initialized
- [ 0.219995] usbcore: registered new interface driver usbfs
- [ 0.220042] usbcore: registered new interface driver hub
- [ 0.220117] usbcore: registered new device driver usb
- [ 0.220506] media: Linux media interface: v0.10
- [ 0.220553] Linux video capture interface: v2.00
- [ 0.220689] pps_core: LinuxPPS API ver. 1 registered
- [ 0.220701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.220725] PTP clock support registered
- [ 0.222242] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.222707] Bluetooth: Core ver 2.21
- [ 0.222756] NET: Registered protocol family 31
- [ 0.222768] Bluetooth: HCI device and connection manager initialized
- [ 0.222786] Bluetooth: HCI socket layer initialized
- [ 0.222801] Bluetooth: L2CAP socket layer initialized
- [ 0.222830] Bluetooth: SCO socket layer initialized
- [ 0.223856] rockchip-cpuinfo cpuinfo: Serial : 9003721ebe94e80f
- [ 0.224354] clocksource: Switched to clocksource arch_sys_counter
- [ 0.268407] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
- [ 0.268648] NET: Registered protocol family 2
- [ 0.269068] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.269212] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.269489] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.269566] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.269629] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.269808] NET: Registered protocol family 1
- [ 0.270318] Trying to unpack rootfs image as initramfs...
- [ 0.610759] Freeing initrd memory: 7876K
- [ 0.611303] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 0.611394] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
- [ 0.614022] audit: initializing netlink subsys (disabled)
- [ 0.614096] audit: type=2000 audit(0.610:1): initialized
- [ 0.619100] VFS: Disk quotas dquot_6.6.0
- [ 0.619223] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.620591] fuse init (API version 7.23)
- [ 0.621713]
- [ 0.621713] TEE Core Framework initialization (ver 1:0.1)
- [ 0.621745] TEE armv7 Driver initialization
- [ 0.622117] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
- [ 0.622135] TEE core: Alloc the misc device "opteearmtz00" (id=0)
- [ 0.622333] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
- [ 0.626292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.626322] io scheduler noop registered
- [ 0.626495] io scheduler cfq registered (default)
- [ 0.627784] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
- [ 0.628848] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
- [ 0.634032] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
- [ 0.634059] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
- [ 0.634083] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
- [ 1.154449] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
- [ 1.155199] rockchip-pcie: probe of f8000000.pcie failed with error -110
- [ 1.156634] backlight supply power not found, using dummy regulator
- [ 1.157424] pwm-backlight backlight: invalid default brightness level: 200, using 105
- [ 1.158963] iep: failed to find iep power down clock source.
- [ 1.160013] IEP Power ON
- [ 1.160466] IEP Power OFF
- [ 1.160799] IEP Driver loaded succesfully
- [ 1.161444] Module initialized.
- [ 1.162074] rk-vcodec ff650000.vpu_service: probe device
- [ 1.162130] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07c301c10
- [ 1.162305] rk-vcodec ff650000.vpu_service: allocator is drm
- [ 1.162360] rk-vcodec ff650000.vpu_service: checking hw id 0
- [ 1.162849] rk-vcodec ff650000.vpu_service: init success
- [ 1.163442] rk-vcodec ff660000.rkvdec: probe device
- [ 1.163490] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07c302410
- [ 1.163620] rk-vcodec ff660000.rkvdec: allocator is drm
- [ 1.163675] rk-vcodec ff660000.rkvdec: checking hw id 6876
- [ 1.163987] rk-vcodec ff660000.rkvdec: init success
- [ 1.165713] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 1.165734] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
- [ 1.167051] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 1.167071] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
- [ 1.168730] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
- [ 1.170325] console [ttyS0] disabled
- [ 1.17038h180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
- [ 1.170970] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
- [ 1.171437] [drm:drm_core_init] Initialized drm 1.1.0 20060810
- [ 1.175417] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
- [ 1.175650] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
- [ 1.175681] rockchip-drm display-subsystem: failed to bind ff960000.dsi (ops dw_mipi_dsi_ops): -517
- [ 1.175940] rockchip-drm display-subsystem: master bind failed: -517
- [ 1.177481] ff960000.dsi.0 supply power not found, using dummy regulator
- [ 1.177743] panel-simple-dsi ff960000.dsi.0: panel_simple_dsi_parse_dcs_cmds: dcs_cmd=29 len=243, cmd_cnt=27
- [ 1.177763] panel-simple-dsi ff960000.dsi.0: panel_simple_dsi_parse_dcs_cmds: dcs_cmd=5 len=8, cmd_cnt=2
- [ 1.178186] mali ff9a0000.gpu: Failed to get regulator
- [ 1.178201] mali ff9a0000.gpu: Power control initialization failed
- [ 1.178513] Unable to detect cache hierarchy from DT for CPU 0
- [ 1.190093] brd: module loaded
- [ 1.194805] loop: module loaded
- [ 1.195329] zram: Added device: zram0
- [ 1.195932] SCSI Media Changer driver v0.25
- [ 1.197237] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
- [ 1.197260] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
- [ 1.198095] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max
- [ 1.368440] wk2xxx_serial_init()
- [ 1.368456] wk2xxx_request_port
- [ 1.368470] ttysWK0 at I/O 0x1 (irq = 105, base_baud = 460800) is a wk2xxx
- [ 1.368730] uart_add_one_port success for line i:= 0 with right 0
- [ 1.368743] wk2xxx_request_port
- [ 1.368755] ttysWK1 at I/O 0x2 (irq = 105, base_baud = 460800) is a wk2xxx
- [ 1.368946] uart_add_one_port success for line i:= 1 with right 0
- [ 1.368959] wk2xxx_request_port
- [ 1.368971] ttysWK2 at I/O 0x3 (irq = 105, base_baud = 460800) is a wk2xxx
- [ 1.369157] uart_add_one_port success for line i:= 2 with right 0
- [ 1.369170] wk2xxx_request_port
- [ 1.369181] ttysWK3 at I/O 0x4 (irq = 105, base_baud = 460800) is a wk2xxx
- [ 1.369364] uart_add_one_port success for line i:= 3 with right 0
- [ 1.369376] uart_add_one_port = 0x0
- [ 1.369403] register spi return v = :0
- [ 1.369455] tun: Universal TUN/TAP device driver, 1.6
- [ 1.369466] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.370376] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
- [ 1.370469] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 1.370489] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 1.370503] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
- [ 1.370530] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 1.370703] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 1.375723] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 1.375851] stmmac - user ID: 0x10, Synopsys ID: 0x35
- [ 1.375862] Ring mode enabled
- [ 1.375871] DMA HW capability register supported
- [ 1.375881] Normal descriptors
- [ 1.375892] RX Checksum Offload Engine supported (type 2)
- [ 1.375902] Wake-Up On Lan supported
- [ 1.375942] Enable RX Mitigation via HW Watchdog Timer
- [ 1.448821] libphy: stmmac: probed
- [ 1.448864] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
- [ 1.448883] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
- [ 1.448901] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
- [ 1.448918] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
- [ 1.448933] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
- [ 1.448946] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
- [ 1.448958] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
- [ 1.448971] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
- [ 1.448982] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
- [ 1.448994] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
- [ 1.449006] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
- [ 1.449018] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
- [ 1.449030] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
- [ 1.449041] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
- [ 1.449053] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
- [ 1.449064] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
- [ 1.449076] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
- [ 1.449087] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
- [ 1.449099] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
- [ 1.449111] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
- [ 1.449122] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
- [ 1.449134] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
- [ 1.449146] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
- [ 1.449158] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
- [ 1.449169] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
- [ 1.449181] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
- [ 1.449193] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
- [ 1.449205] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
- [ 1.449217] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
- [ 1.449228] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
- [ 1.449241] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
- [ 1.449253] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
- [ 1.450125] PPP generic driver version 2.4.2
- [ 1.450333] PPP BSD Compression module registered
- [ 1.450348] PPP Deflate Compression module registered
- [ 1.450382] PPP MPPE Compression module registered
- [ 1.450400] NET: Registered protocol family 24
- [ 1.450439] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 1.450453] CSLIP: code copyright 1989 Regents of the University of California.
- [ 1.450524] usbcore: registered new interface driver mt7601u
- [ 1.450547] Rockchip WiFi SYS interface (V1.00) ...
- [ 1.450608] usbcore: registered new interface driver catc
- [ 1.450650] usbcore: registered new interface driver kaweth
- [ 1.450666] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
- [ 1.450705] usbcore: registered new interface driver pegasus
- [ 1.450747] usbcore: registered new interface driver rtl8150
- [ 1.450792] usbcore: registered new interface driver r8152
- [ 1.450807] hso: drivers/net/usb/hso.c: Option Wireless
- [ 1.450868] usbcore: registered new interface driver hso
- [ 1.450915] usbcore: registered new interface driver asix
- [ 1.450956] usbcore: registered new interface driver ax88179_178a
- [ 1.450998] usbcore: registered new interface driver cdc_ether
- [ 1.451069] usbcore: registered new interface driver cdc_eem
- [ 1.451111] usbcore: registered new interface driver dm9601
- [ 1.451165] usbcore: registered new interface driver smsc75xx
- [ 1.451214] usbcore: registered new interface driver smsc95xx
- [ 1.451264] usbcore: registered new interface driver gl620a
- [ 1.451307] usbcore: registered new interface driver net1080
- [ 1.451348] usbcore: registered new interface driver plusb
- [ 1.451389] usbcore: registered new interface driver rndis_host
- [ 1.451432] usbcore: registered new interface driver cdc_subset
- [ 1.451473] usbcore: registered new interface driver zaurus
- [ 1.451519] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 1.451577] usbcore: registered new interface driver int51x1
- [ 1.451620] usbcore: registered new interface driver kalmia
- [ 1.451662] usbcore: registered new interface driver ipheth
- [ 1.451707] usbcore: registered new interface driver sierra_net
- [ 1.451753] usbcore: registered new interface driver cx82310_eth
- [ 1.451804] usbcore: registered new interface driver cdc_ncm
- [ 1.451845] usbcore: registered new interface driver qmi_wwan
- [ 1.451888] usbcore: registered new interface driver cdc_mbim
- [ 1.457556] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd
- [ 1.465510] rockchip-typec-phy ff800000.phy: Needed 1 loops to turn on
- [ 1.465737] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
- [ 1.466407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.466425] ehci-pci: EHCI PCI platform driver
- [ 1.466485] ehci-platform: EHCI generic platform driver
- [ 1.470134] ehci-platform fe380000.usb: EHCI Host Controller
- [ 1.470166] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
- [ 1.470338] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
- [ 1.477704] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 1.477843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.477860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.477874] usb usb1: Product: EHCI Host Controller
- [ 1.477887] usb usb1: Manufacturer: Linux 4.4.103 ehci_hcd
- [ 1.477899] usb usb1: SerialNumber: fe380000.usb
- [ 1.478565] hub 1-0:1.0: USB hub found
- [ 1.478616] hub 1-0:1.0: 1 port detected
- [ 1.482694] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 1.482727] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
- [ 1.482895] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
- [ 1.491067] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 1.491249] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.491266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.491281] usb usb2: Product: EHCI Host Controller
- [ 1.491293] usb usb2: Manufacturer: Linux 4.4.103 ehci_hcd
- [ 1.491306] usb usb2: SerialNumber: fe3c0000.usb
- [ 1.491888] hub 2-0:1.0: USB hub found
- [ 1.491928] hub 2-0:1.0: 1 port detected
- [ 1.492761] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.492799] ohci-platform: OHCI generic platform driver
- [ 1.493222] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 1.493254] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
- [ 1.493482] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
- [ 1.548560] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.548588] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.548605] usb usb3: Product: Generic Platform OHCI controller
- [ 1.548619] usb usb3: Manufacturer: Linux 4.4.103 ohci_hcd
- [ 1.548633] usb usb3: SerialNumber: fe3a0000.usb
- [ 1.549228] hub 3-0:1.0: USB hub found
- [ 1.549274] hub 3-0:1.0: 1 port detected
- [ 1.549959] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 1.549991] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
- [ 1.550158] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
- [ 1.605208] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.605248] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.605264] usb usb4: Product: Generic Platform OHCI controller
- [ 1.605279] usb usb4: Manufacturer: Linux 4.4.103 ohci_hcd
- [ 1.605294] usb usb4: SerialNumber: fe3e0000.usb
- [ 1.605894] hub 4-0:1.0: USB hub found
- [ 1.605934] hub 4-0:1.0: 1 port detected
- [ 1.607323] usbcore: registered new interface driver cdc_acm
- [ 1.607337] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.607421] usbcore: registered new interface driver usblp
- [ 1.607486] usbcore: registered new interface driver cdc_wdm
- [ 1.607552] usbcore: registered new interface driver uas
- [ 1.607713] usbcore: registered new interface driver usb-storage
- [ 1.607772] usbcore: registered new interface driver ums-alauda
- [ 1.607835] usbcore: registered new interface driver ums-cypress
- [ 1.607894] usbcore: registered new interface driver ums-datafab
- [ 1.607950] usbcore: registered new interface driver ums_eneub6250
- [ 1.608005] usbcore: registered new interface driver ums-freecom
- [ 1.608063] usbcore: registered new interface driver ums-isd200
- [ 1.608119] usbcore: registered new interface driver ums-jumpshot
- [ 1.608175] usbcore: registered new interface driver ums-karma
- [ 1.608234] usbcore: registered new interface driver ums-onetouch
- [ 1.608296] usbcore: registered new interface driver ums-sddr09
- [ 1.608354] usbcore: registered new interface driver ums-sddr55
- [ 1.608412] usbcore: registered new interface driver ums-usbat
- [ 1.608522] usbcore: registered new interface driver usbserial
- [ 1.608573] usbcore: registered new interface driver usbserial_generic
- [ 1.608613] usbserial: USB Serial support registered for generic
- [ 1.608674] usbcore: registered new interface driver ch341
- [ 1.608716] usbserial: USB Serial support registered for ch341-uart
- [ 1.608777] usbcore: registered new interface driver cp210x
- [ 1.608815] usbserial: USB Serial support registered for cp210x
- [ 1.608902] usbcore: registered new interface driver option
- [ 1.608940] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 1.609213] usbcore: registered new interface driver pl2303
- [ 1.609253] usbserial: USB Serial support registered for pl2303
- [ 1.609332] usbcore: registered new interface driver trancevibrator
- [ 1.609349] usb20_otg: version 3.10a 21-DEC-2012
- [ 1.609644] usb20_host: version 3.10a 21-DEC-2012
- [ 1.610320] usbcore: registered new interface driver xpad
- [ 1.610387] usbcore: registered new interface driver usb_acecad
- [ 1.610459] usbcore: registered new interface driver aiptek
- [ 1.610524] usbcore: registered new interface driver gtco
- [ 1.610589] usbcore: registered new interface driver hanwang
- [ 1.610651] usbcore: registered new interface driver kbtab
- [ 1.610668] ==gsl_ts_init==
- [ 1.610708] ret=0
- [ 1.611418] .. rk pwm remotectl v1.1 init
- [ 1.611737] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
- [ 1.612361] sensor_register_slave:mma8452,id=17
- [ 1.612380] sensor_register_slave:lis3dh,id=7
- [ 1.612397] sensor_register_slave:mma7660,id=18
- [ 1.612414] sensor_register_slave:lsm303d,id=22
- [ 1.612430] sensor_register_slave:gs_mc3230,id=23
- [ 1.612439] [Gsensor] gsensor_init
- [ 1.612455] sensor_register_slave:mpu6880_acc,id=24
- [ 1.612473] sensor_register_slave:mpu6500_acc,id=25
- [ 1.612489] sensor_register_slave:lsm330_acc,id=26
- [ 1.612506] sensor_register_slave:akm8975,id=29
- [ 1.612523] sensor_register_slave:akm8963,id=30
- [ 1.612539] sensor_register_slave:l3g4200d,id=44
- [ 1.612555] sensor_register_slave:l3g20d,id=45
- [ 1.612572] sensor_register_slave:ewtsa,id=46
- [ 1.612588] sensor_register_slave:lsm330_gyro,id=50
- [ 1.612604] sensor_register_slave:cm3217,id=52
- [ 1.612621] sensor_register_slave:cm3218,id=53
- [ 1.613565] i2c /dev entries driver
- [ 1.615111] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 1.615229] fan53555-reg: supplied by vcc5v0_sys
- [ 1.617291] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
- [ 1.617366] fan53555-reg: supplied by vcc5v0_sys
- [ 1.619620] rk808 0-001b: Pmic Chip id: 0x0
- [ 1.623501] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 1.623577] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 1.623705] DCDC_REG1: supplied by vcc3v3_sys
- [ 1.624591] DCDC_REG2: supplied by vcc3v3_sys
- [ 1.625215] DCDC_REG3: supplied by vcc3v3_sys
- [ 1.625488] DCDC_REG4: supplied by vcc3v3_sys
- [ 1.625994] LDO_REG1: supplied by vcc3v3_sys
- [ 1.627174] LDO_REG2: supplied by vcc3v3_sys
- [ 1.628194] LDO_REG3: supplied by vcc3v3_sys
- [ 1.629237] LDO_REG4: supplied by vcc3v3_sys
- [ 1.630244] LDO_REG5: supplied by vcc3v3_sys
- [ 1.631281] LDO_REG6: supplied by vcc3v3_sys
- [ 1.632278] LDO_REG7: supplied by vcc3v3_sys
- [ 1.633312] LDO_REG8: supplied by vcc3v3_sys
- [ 1.634295] SWITCH_REG1: supplied by vcc3v3_sys
- [ 1.634605] SWITCH_REG2: supplied by vcc3v3_sys
- [ 1.638426] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
- [ 1.639048] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009942000
- [ 1.639951] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009944000
- [ 1.640078] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
- [ 1.640096] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
- [ 1.640112] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xfer on device rockchip-pinctrl
- [ 1.640127] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
- [ 1.640580] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff8009946000
- [ 1.641420] GSLX680 Enter gsl_ts_probe
- [ 1.797704] usb 2-1: new high-speed USB device number 2 using ehci-platform
- [ 1.921696] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
- [ 1.921736] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.921757] usb 2-1: Product: USB 2.0 Hub [MTT]
- [ 1.922314] hub 2-1:1.0: USB hub found
- [ 1.922444] hub 2-1:1.0: 7 ports detected
- [ 1.951046] gsl_ts_probe--1305, i2c_master_recv fail
- [ 1.951123] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009948000
- [ 1.952362] IR NEC protocol handler initialized
- [ 1.952402] IR RC5(x/sz) protocol handler initialized
- [ 1.952420] IR RC6 protocol handler initialized
- [ 1.952436] IR JVC protocol handler initialized
- [ 1.952452] IR Sony protocol handler initialized
- [ 1.952465] IR SANYO protocol handler initialized
- [ 1.952479] IR Sharp protocol handler initialized
- [ 1.952493] IR MCE Keyboard/mouse protocol handler initialized
- [ 1.952508] IR XMP protocol handler initialized
- [ 1.952823] usbcore: registered new interface driver uvcvideo
- [ 1.952834] USB Video Class driver (1.1.1)
- [ 1.952854] CamSys driver version: v0.38.0, CamSys head file version: v1.0.0
- [ 1.958789] __power_supply_register: Expected proper parent device for 'test_ac'
- [ 1.959008] __power_supply_register: Expected proper parent device for 'test_battery'
- [ 1.959324] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
- [ 1.959448] __power_supply_register: Expected proper parent device for 'test_usb'
- [ 1.962778] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
- [ 1.964206] device-mapper: uevent: version 1.0.3
- [ 1.964642] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
- [ 1.964894] Bluetooth: HCI UART driver ver 2.3
- [ 1.964909] Bluetooth: HCI UART protocol H4 registered
- [ 1.964919] Bluetooth: HCI UART protocol LL registered
- [ 1.964935] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
- [ 1.964945] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
- [ 1.964955] rtk_btusb: Register usb char device interface for BT driver
- [ 1.965241] usbcore: registered new interface driver rtk_btusb
- [ 1.965817] cpu cpu0: leakage=19
- [ 1.983472] cpu cpu0: temp=46250, pvtm=147784 (147454 + 330)
- [ 1.983894] cpu cpu0: pvtm-sel=1
- [ 1.984313] cpu cpu4: leakage=36
- [ 1.996540] cpu cpu4: temp=46250, pvtm=154617 (154442 + 175)
- [ 1.996695] cpu cpu4: pvtm-sel=1
- [ 2.002280] sdhci: Secure Digital Host Controller Interface driver
- [ 2.002329] sdhci: Copyright(c) Pierre Ossman
- [ 2.002350] Synopsys Designware Multimedia Card Interface Driver
- [ 2.003578] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
- [ 2.003736] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
- [ 2.003758] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
- [ 2.003819] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
- [ 2.003847] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
- [ 2.003902] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
- [ 2.003915] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
- [ 2.005022] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
- [ 2.005149] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
- [ 2.005169] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
- [ 2.005220] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
- [ 2.005246] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
- [ 2.005362] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
- [ 2.006271] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.008220] sdhci-arasan fe330000.sdhci: No vmmc regulator found
- [ 2.008236] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
- [ 2.034479] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
- [ 2.036638] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.041304] usbcore: registered new interface driver usbhid
- [ 2.041322] usbhid: USB HID core driver
- [ 2.041483] inv_mpu_iio: inv_mpu_init:746
- [ 2.042050] ashmem: initialized
- [ 2.044717] ff100000.saradc supply vref not found, using dummy regulator
- [ 2.050487] rknandbase v1.1 2016-11-08
- [ 2.051160] usbcore: registered new interface driver snd-usb-audio
- [ 2.052546] rt5640 1-001c: Can not read property hp-con-gpio
- [ 2.052590] rt5640 1-001c: Can not read property: linein-mute.
- [ 2.065202] lkd tc358749x_parse_dts: power(1)
- [ 2.065301] lkd tc358749x_parse_dts: int(0)
- [ 2.065389] lkd tc358749x_parse_dts: reset(1)
- [ 2.075878] mmc0: MAN_BKOPS_EN bit is not set
- [ 2.076457] tc358749x 1-000f: tc358749x_parse_dts success
- [ 2.076627] tc358749x 1-000f: tc358749x_i2c_probe success
- [ 2.082249] u32 classifier
- [ 2.082283] Actions configured
- [ 2.082353] Netfilter messages via NETLINK v0.30.
- [ 2.082439] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 2.082931] ctnetlink v0.93: registering with nfnetlink.
- [ 2.083805] xt_time: kernel timezone is -0000
- [ 2.084676] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.084865] arp_tables: (C) 2002 David S. Miller
- [ 2.085284] Initializing XFRM netlink socket
- [ 2.085730] NET: Registered protocol family 10
- [ 2.086700] mip6: Mobile IPv6
- [ 2.086736] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.087883] sit: IPv6 over IPv4 tunneling driver
- [ 2.088351] NET: Registered protocol family 17
- [ 2.088382] NET: Registered protocol family 15
- [ 2.088422] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 2.088658] mmc0: new HS400 Enhanced strobe MMC card at address 0001
- [ 2.089076] Bridge firewalling registered
- [ 2.089096] Ebtables v2.0 registered
- [ 2.089219] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
- [ 2.089389] Bluetooth: RFCOMM TTY layer initialized
- [ 2.089412] Bluetooth: RFCOMM socket layer initialized
- [ 2.089438] Bluetooth: RFCOMM ver 1.11
- [ 2.089464] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 2.089475] Bluetooth: BNEP filters: protocol multicast
- [ 2.089491] Bluetooth: BNEP socket layer initialized
- [ 2.089509] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 2.089524] Bluetooth: HIDP socket layer initialized
- [ 2.089542] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB
- [ 2.089561] l2tp_core: L2TP core driver, V2.0
- [ 2.089584] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 2.089613] [WLAN_RFKILL]: Enter rfkill_wlan_init
- [ 2.089831] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB
- [ 2.089912] [WLAN_RFKILL]: Enter rfkill_wlan_probe
- [ 2.089969] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
- [ 2.089981] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
- [ 2.089994] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
- [ 2.090071] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
- [ 2.090085] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
- [ 2.090098] [WLAN_RFKILL]: Exit rfkill_wlan_probe
- [ 2.090119] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB
- [ 2.090156] [BT_RFKILL]: Enter rfkill_rk_init
- [ 2.090535] rkpart: partition size too small (0)
- [ 2.090557] parameter: 0x000000000 -- 0x000400000 (4 MB)
- [ 2.090571] uboot: 0x000400000 -- 0x000800000 (4 MB)
- [ 2.090584] trust: 0x000800000 -- 0x000c00000 (4 MB)
- [ 2.090600] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
- [ 2.090617] misc: 0x000c00000 -- 0x001000000 (4 MB)
- [ 2.090630] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
- [ 2.090644] resource: 0x001000000 -- 0x002000000 (16 MB)
- [ 2.090652] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
- [ 2.090673] kernel: 0x002000000 -- 0x003800000 (24 MB)
- [ 2.090678] 800000 -- 0x005800000 (32 MB)
- [ 2.090683] recovery: 0x005800000 -- 0x007800000 (32 MB)
- [ 2.090687] backup: 0x007800000 -- 0x00e800000 (112 MB)
- [ 2.090691] cache: 0x00e800000 -- 0x016800000 (128 MB)
- [ 2.090694] system: 0x016800000 -- 0x076800000 (1536 MB)
- [ 2.090699] metadata: 0x076800000 -- 0x077800000 (16 MB)
- [ 2.090702] baseparamer: 0x077800000 -- 0x077c00000 (4 MB)
- [ 2.090706] userdata: 0x077c00000 -- 0x3a3a00000 (12990 MB)
- [ 2.090750] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
- [ 2.091358] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
- [ 2.091359] [BT_RFKILL]: Request irq for bt wakeup host
- [ 2.091413] [BT_RFKILL]: BT_WAKE_HOST IRQ fired
- [ 2.091440] [BT_RFKILL]: ** disable irq
- [ 2.091696] [BT_RFKILL]: bt_default device registered.
- [ 2.091985] sensor_register_slave:mpu6880_gyro,id=49
- [ 2.093785] Registered cp15_barrier emulation handler
- [ 2.093874] vendor storage:20160801 ret = 0
- [ 2.093881] Registered setend emulation handler
- [ 2.094692] registered taskstats version 1
- [ 2.095705] rockchip ion idev is NULL
- [ 2.095725] rga2 ff680000.rga: rga ion client create success!
- [ 2.095939] rga: Driver loaded successfully ver:3.02
- [ 2.097741] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
- [ 2.098031] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
- [ 2.098113] rockchip-drm display-subsystem: bound ff960000.dsi (ops dw_mipi_dsi_ops)
- [ 2.098652] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
- [ 2.098693] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
- [ 2.098786] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
- [ 2.103228] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
- [ 2.103250] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 2.103265] [drm:drm_vblank_init] No driver support for vblank timestamp query.
- [ 2.140456] rockchip-drm display-subsystem: fb0: frame buffer device
- [ 2.154031] mali ff9a0000.gpu: leakage=25
- [ 2.167173] mali ff9a0000.gpu: temp=46875, pvtm=122757 (122697 + 60)
- [ 2.168694] mali ff9a0000.gpu: pvtm-sel=1
- [ 2.170032] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
- [ 2.171537] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 284; [Func] : kbase_devfreq_init(); success initing power_model_simple.
- [ 2.172240] mali ff9a0000.gpu: Probed as mali0
- [ 2.177871] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
- [ 2.177913] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
- [ 2.178137] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
- [ 2.178181] xhci-hcd xhci-hcd.9.auto: irq 236, io mem 0xfe800000
- [ 2.178296] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.178312] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.178324] usb usb5: Product: xHCI Host Controller
- [ 2.178335] usb usb5: Manufacturer: Linux 4.4.103 xhci-hcd
- [ 2.178345] usb usb5: SerialNumber: xhci-hcd.9.auto
- [ 2.178817] hub 5-0:1.0: USB hub found
- [ 2.178846] hub 5-0:1.0: 1 port detected
- [ 2.179063] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
- [ 2.179080] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
- [ 2.179134] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 2.179212] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
- [ 2.179225] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.179237] usb usb6: Product: xHCI Host Controller
- [ 2.179247] usb usb6: Manufacturer: Linux 4.4.103 xhci-hcd
- [ 2.179257] usb usb6: SerialNumber: xhci-hcd.9.auto
- [ 2.179618] hub 6-0:1.0: USB hub found
- [ 2.179644] hub 6-0:1.0: 1 port detected
- [ 2.180727] xhci-hcd xhci-hcd.9.auto: remove, state 1
- [ 2.180750] usb usb6: USB disconnect, device number 1
- [ 2.204530] xhci-hcd xhci-hcd.9.auto: Host not halted after 16000 microseconds.
- [ 2.204564] xhci-hcd xhci-hcd.9.auto: Host controller not halted, aborting reset.
- [ 2.204602] xhci-hcd xhci-hcd.9.auto: USB bus 6 deregistered
- [ 2.204616] xhci-hcd xhci-hcd.9.auto: remove, state 1
- [ 2.204634] usb usb5: USB disconnect, device number 1
- [ 2.205056] xhci-hcd xhci-hcd.9.auto: USB bus 5 deregistered
- [ 2.209244] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
- [ 2.209284] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5
- [ 2.209480] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
- [ 2.209518] xhci-hcd xhci-hcd.10.auto: irq 237, io mem 0xfe900000
- [ 2.209625] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.209637] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.209647] usb usb5: Product: xHCI Host Controller
- [ 2.209656] usb usb5: Manufacturer: Linux 4.4.103 xhci-hcd
- [ 2.209665] usb usb5: SerialNumber: xhci-hcd.10.auto
- [ 2.210075] hub 5-0:1.0: USB hub found
- [ 2.210099] hub 5-0:1.0: 1 port detected
- [ 2.210276] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
- [ 2.210291] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6
- [ 2.210336] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 2.210401] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
- [ 2.210412] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.210422] usb usb6: Product: xHCI Host Controller
- [ 2.210430] usb usb6: Manufacturer: Linux 4.4.103 xhci-hcd
- [ 2.210439] usb usb6: SerialNumber: xhci-hcd.10.auto
- [ 2.210734] hub 6-0:1.0: USB hub found
- [ 2.210757] hub 6-0:1.0: 1 port detected
- [ 2.211588] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
- [ 2.211671] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
- [ 2.211688] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
- [ 2.211713] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
- [ 2.211734] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
- [ 2.211772] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
- [ 2.211781] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
- [ 2.211997] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
- [ 2.224404] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 2.237761] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
- [ 2.238445] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
- [ 2.238521] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
- [ 2.238537] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
- [ 2.238562] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
- [ 2.238581] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
- [ 2.238650] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
- [ 2.238936] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq
- [ 2.239041] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
- [ 2.239450] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
- [ 2.251214] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 2.264497] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
- [ 2.265758] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
- [ 2.281228] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
- [ 2.282754] asoc-simple-card rt5640-sound: rt5640-aif2 <-> ff890000.i2s mapping ok
- [ 2.283484] asoc-simple-card rt5640-sound: tc358749x-audio <-> ff890000.i2s mapping ok
- [ 2.284072] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 2.285757] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 2.287452] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 2.289891] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1
- [ 2.290486] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 2.293067] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
- [ 2.295305] otg_wakelock_init: No USB transceiver found
- [ 2.296802] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:03 UTC (1358499003)
- [ 2.298291] It doesn't contain Rogue gpu
- u 2.329230]
- [ 2.349981] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
复制代码
|
|