Firefly开源社区

打印 上一主题 下一主题

重新烧写uboot后无法启动

16

积分

0

威望

0

贡献

技术小白

积分
16

重新烧写uboot后无法启动

发表于 2019-5-4 22:50:48      浏览:2724 | 回复:1        打印      只看该作者   [复制链接] 楼主
emmc换了一片,想试试完全空白的emmc能不能启动成功。
自己编译了整个系统镜像,在原来的emmc上擦除后用maskrom模式下载,可以启动成功。
换了一片emmc后,下载成功。但无法进入界面。
命令行打印如下:
  1. DDR Version 1.17 20190115
  2. In
  3. Channel 0: DDR3, 800MHz
  4. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  5. Channel 1: DDR3, 800MHz
  6. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  7. 256B stride
  8. ch 0 ddrconfig = 0x101, ddrsize = 0x20
  9. ch 1 ddrconfig = 0x101, ddrsize = 0x20
  10. pmugrf_os_reg[2] = 0x32817281, stride = 0x9
  11. OUT
  12. Boot1: 2017-06-09, version: 1.09
  13. CPUId = 0x0
  14. ChipType = 0x10, 1827
  15. SdmmcInit=2 0
  16. BootCapSize=100000
  17. UserCapSize=14910MB
  18. FwPartOffset=2000 , 100000
  19. SdmmcInit=0 20
  20. StorageInit ok = 66565
  21. LoadTrustBL
  22. No find bl30.bin
  23. Load uboot, ReadLba = 2000
  24. Load OK, addr=0x200000, size=0x7a274
  25. RunBL31 0x10000
  26. NOTICE:  BL31: v1.3(debug):2bb878d
  27. NOTICE:  BL31: Built : 11:57:30, Jan  4 2019
  28. NOTICE:  BL31: Rockchip release version: v1.1
  29. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  30. INFO:    Using opteed sec cpu_context!
  31. INFO:    boot cpu mask: 0
  32. INFO:    plat_rockchip_pmu_init(1181): pd status 3e
  33. INFO:    BL31: Initializing runtime services
  34. INFO:    BL31: Initializing BL32
  35. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec  7 06:11:20 UTC 2018 aarch64)

  36. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

  37. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
  38. INFO:    BL31: Preparing for EL3 exit to normal world
  39. INFO:    Entry point address = 0x200000
  40. INFO:    SPSR = 0x3c9


  41. U-Boot 2014.10-RK3399-06 (Apr 22 2019 - 21:09:02)

  42. CPU: rk3399
  43. cpu version = 0
  44. CPU's clock information:
  45.     aplll = 816000000HZ
  46.     apllb = 24000000HZ
  47.     gpll = 800000000HZ
  48.                aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
  49.                aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
  50.                hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
  51.     cpll = 800000000HZ
  52.     dpll = 800000000HZ
  53.     vpll = 24000000HZ
  54.     npll = 24000000HZ
  55.     ppll = 676000000HZ
  56. Board:  Rockchip platform Board
  57. Uboot as second level loader
  58. DRAM:  Found dram banks: 1
  59. Adding bank:0000000000200000(000000007fe00000)
  60. Reserve memory for trust os.
  61. dram reserve bank: base = 0x08400000, size = 0x01e00000
  62. 128 MiB
  63. SdmmcInit = 0 20
  64. storage init OK!
  65. Using default environment

  66. GetParam
  67. remotectl v0.1
  68. pwm freq=0xb8320
  69. pwm_freq_nstime=0x52d
  70. Load FDT from resource image.
  71. power key: bank-0 pin-5
  72. can't find dts node for fixed
  73. usb bc: can find node by path: /dwc-control-usb/usb_bc
  74. dwc_otg_check_dpdm: usb bc disconnected
  75. pmic:rk808
  76. can't find dts node for pwm1
  77. set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
  78. CPU's clock information:
  79.     aplll = 816000000HZ
  80.     apllb = 24000000HZ
  81.     gpll = 800000000HZ
  82.                aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
  83.                aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
  84.                hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
  85.     cpll = 800000000HZ
  86.     dpll = 800000000HZ
  87.     vpll = 24000000HZ
  88.     npll = 24000000HZ
  89.     ppll = 676000000HZ
  90. SecureBootEn = 0, SecureBootLock = 0

  91. #Boot ver: 2019-04-22#1.09
  92. empty serial no.
  93. normal boot.
  94. checkKey
  95. vbus = 0
  96. board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
  97. no fuel gauge found
  98. no fuel gauge found
  99. failed to find phy node
  100. read logo on state from dts [1]
  101. no fuel gauge found
  102. Using display timing dts
  103. Detailed mode clock 150000 kHz, flags[a]
  104.     H: 1920 2202 2212 2222
  105.     V: 1080 1090 1100 1125
  106. bus_format: 100e
  107. rk lcdc - 0 dclk set: dclk = 150000000HZ, pll select = 1, div = 1
  108. final DSI-Link bandwidth: 1000 Mbps x 4
  109. failed to wait for phy clk lane stop state
  110. ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
  111. failed to display kernel logo
  112. checkKey
  113. vbus = 0
  114. board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
  115. got recovery cmd from misc.
  116. load fdt from resouce.
  117. vendor read error!
  118. Set oem_unlocked=0Secure Boot state: 0
  119. kernel   @ 0x00280000 (0x0125a008)
  120. ramdisk  @ 0x04bf0000 (0x007b1848)
  121. bootrk: do_bootm_linux...
  122.    Loading Device Tree to 0000000004600000, end 0000000004616f78 ... OK
  123. Add bank:0000000000200000, 0000000008200000
  124. Add bank:000000000a200000, 0000000075e00000
  125. WARNING: could not set reg FDT_ERR_BADOFFSET.

  126. Starting kernel ...

  127. [    0.000000] Booting Linux on physical CPU 0x0
  128. [    0.000000] Initializing cgroup subsys cpuset
  129. [    0.000000] Initializing cgroup subsys cpu
  130. [    0.000000] Initializing cgroup subsys cpuacct
  131. [    0.000000] Initializing cgroup subsys schedtune
  132. [    0.000000] Linux version 4.4.103 (xin@xin-virtual-machine) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Apr 21 22:09:08 CST 2019
  133. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  134. [    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  135. [    0.000000] bootconsole [uart0] enabled
  136. [    0.000000] hdmi init vic is -1
  137. [    0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
  138. [    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  139. [    0.000000] psci: probing for conduit method from DT.
  140. [    0.000000] psci: PSCIv1.0 detected in firmware.
  141. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  142. [    0.000000] psci: Trusted OS migration not required
  143. [    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef5000 s45504 r8192 d32320 u86016
  144. [    0.000000] Detected VIPT I-cache on CPU0
  145. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  146. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 507912
  147. [    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00010000@0x0002C000(recovery),0x00038000@0x0003C000(backup),0x00040000@0x00074000(cache),0x00300000@0x000B4000(system),0x00008000@0x003B4000(metadata),0x00002000@0x003BC000(baseparamer),-@0x003BE000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2019-04-22_21:09:02 hdmi.vic=-1 SecureBootCheckOk=0
  148. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  149. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  150. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  151. [    0.000000] software IO TLB [mem 0x7eead000-0x7eeed000] (0MB) mapped at [ffffffc07eead000-ffffffc07eeecfff]
  152. [    0.000000] Memory: 1982412K/2064384K available (11006K kernel code, 1640K rwdata, 5256K rodata, 832K init, 1073K bss, 65588K reserved, 16384K cma-reserved)
  153. [    0.000000] Virtual kernel memory layout:
  154. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  155. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  156. [    0.000000]       .init : 0xffffff8009070000 - 0xffffff8009140000   (   832 KB)
  157. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008b40000   ( 11008 KB)
  158. [    0.000000]     .rodata : 0xffffff8008b40000 - 0xffffff8009070000   (  5312 KB)
  159. [    0.000000]       .data : 0xffffff8009140000 - 0xffffff80092da008   (  1641 KB)
  160. [    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
  161. [    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
  162. [    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
  163. [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  164. [    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
  165. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  166. [    0.000000] Preemptible hierarchical RCU implementation.
  167. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  168. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  169. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  170. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  171. [    0.000000] GIC: Using split EOI/Deactivate mode
  172. [    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  173. [    0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
  174. [    0.000000] ITS: using cache flushing for cmd queue
  175. [    0.000000] GIC: using LPI property table @0x000000000a280000
  176. [    0.000000] ITS: Allocated 1792 chunks for LPIs
  177. [    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  178. [    0.000000] CPU0: using LPI pending table @0x000000000a290000
  179. [    0.000000] GIC: using cache flushing for LPI property table
  180. [    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  181. [    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  182. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  183. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  184. [    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
  185. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  186. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  187. [    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  188. [    0.001986] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
  189. [    0.002948] pid_max: default: 32768 minimum: 301
  190. [    0.003464] Security Framework initialized
  191. [    0.003853] SELinux:  Initializing.
  192. [    0.004265] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  193. [    0.004894] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  194. [    0.006323] Initializing cgroup subsys freezer
  195. [    0.006751] Initializing cgroup subsys debug
  196. [    0.008070] sched-energy: Sched-energy-costs installed from DT
  197. [    0.008620] CPU0: update cpu_capacity 401
  198. [    0.009074] ASID allocator initialised with 65536 entries
  199. [    0.025900] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  200. [    0.027200] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  201. [    0.039292] Detected VIPT I-cache on CPU1
  202. [    0.039325] CPU1: found redistributor 1 region 0:0x00000000fef20000
  203. [    0.039359] CPU1: using LPI pending table @0x000000000a3f0000
  204. [    0.039402] CPU1: update cpu_capacity 401
  205. [    0.039405] CPU1: Booted secondary processor [410fd034]
  206. [    0.049286] Detected VIPT I-cache on CPU2
  207. [    0.049305] CPU2: found redistributor 2 region 0:0x00000000fef40000
  208. [    0.049338] CPU2: using LPI pending table @0x000000007c020000
  209. [    0.049366] CPU2: update cpu_capacity 401
  210. [    0.049369] CPU2: Booted secondary processor [410fd034]
  211. [    0.059323] Detected VIPT I-cache on CPU3
  212. [    0.059342] CPU3: found redistributor 3 region 0:0x00000000fef60000
  213. [    0.059374] CPU3: using LPI pending table @0x000000007c060000
  214. [    0.059401] CPU3: update cpu_capacity 401
  215. [    0.059404] CPU3: Booted secondary processor [410fd034]
  216. [    0.069373] Detected PIPT I-cache on CPU4
  217. [    0.069402] CPU4: found redistributor 100 region 0:0x00000000fef80000
  218. [    0.069441] CPU4: using LPI pending table @0x000000007c0a0000
  219. [    0.069483] CPU4: update cpu_capacity 1024
  220. [    0.069486] CPU4: Booted secondary processor [410fd082]
  221. [    0.079396] Detected PIPT I-cache on CPU5
  222. [    0.079414] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  223. [    0.079449] CPU5: using LPI pending table @0x000000007c0e0000
  224. [    0.079476] CPU5: update cpu_capacity 1024
  225. [    0.079479] CPU5: Booted secondary processor [410fd082]
  226. [    0.079564] Brought up 6 CPUs
  227. [    0.091666] SMP: Total of 6 processors activated.
  228. [    0.092108] CPU features: detected feature: GIC system register CPU interface
  229. [    0.092777] CPU: All CPU(s) started at EL2
  230. [    0.093200] alternatives: patching kernel code
  231. [    0.095287] devtmpfs: initialized
  232. [    0.116455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  233. [    0.117416] futex hash table entries: 2048 (order: 5, 131072 bytes)
  234. [    0.118743] pinctrl core: initialized pinctrl subsystem
  235. [    0.120836] Failed to find legacy iommu devices
  236. [    0.121650] NET: Registered protocol family 16
  237. [    0.122438] schedtune: init normalization constants...
  238. [    0.122959] schedtune: CLUSTER[0-3]      min_pwr:    56 max_pwr:   222
  239. [    0.123593] schedtune: CPU[0]            min_pwr:     0 max_pwr:   222
  240. [    0.124228] schedtune: CPU[1]            min_pwr:     0 max_pwr:   222
  241. [    0.124862] schedtune: CPU[2]            min_pwr:     0 max_pwr:   222
  242. [    0.125495] schedtune: CPU[3]            min_pwr:     0 max_pwr:   222
  243. [    0.126130] schedtune: CLUSTER[4-5]      min_pwr:    65 max_pwr:  1108
  244. [    0.126768] schedtune: CPU[4]            min_pwr:     0 max_pwr:  1108
  245. [    0.127401] schedtune: CPU[5]            min_pwr:     0 max_pwr:  1108
  246. [    0.128034] schedtune: SYSTEM            min_pwr:   121 max_pwr:  4434
  247. [    0.128668] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
  248. [    0.129408] schedtune: verify normalization constants...
  249. [    0.129925] schedtune: max_pwr/2^0: 4313 => norm_pwr:  1024
  250. [    0.130471] schedtune: max_pwr/2^1: 2156 => norm_pwr:   511
  251. [    0.131012] schedtune: max_pwr/2^2: 1078 => norm_pwr:   255
  252. [    0.131552] schedtune: max_pwr/2^3:  539 => norm_pwr:   127
  253. [    0.132093] schedtune: max_pwr/2^4:  269 => norm_pwr:    63
  254. [    0.132634] schedtune: max_pwr/2^5:  134 => norm_pwr:    31
  255. [    0.133175] schedtune: configured to support 5 boost groups
  256. [    0.143846] cpuidle: using governor ladder
  257. [    0.153848] cpuidle: using governor menu
  258. [    0.154241] Registered FIQ tty driver
  259. [    0.154922] vdso: 2 pages (1 code @ ffffff8008b46000, 1 data @ ffffff8009144000)
  260. [    0.155664] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  261. [    0.157747] DMA: preallocated 2048 KiB pool for atomic allocations
  262. [    0.178796] console [pstore0] enabled
  263. [    0.179388] pstore: Registered ramoops as persistent store backend
  264. [    0.179992] ramoops: attached 0xf0000@0x110000, ecc: 0/0
  265. [    0.182851] fiq debugger fiq mode enabled
  266. [ [    0.183495] console [ttyFIQ0] enabled
  267.    0.183495] console [ttyFIQ0] enabled
  268. [[     0.184196] bootconsole [uart0] disabled
  269.    0.184196] bootconsole [uart0] disabled
  270. [    0.185105] Registered fiq debugger ttyFIQ0
  271. [    0.215225] Rockchip hdmi driver version 2.0
  272. .
  273. [    0.217541] iommu: Adding device ff650000.vpu_service to group 0
  274. [    0.217645] iommu: Adding device ff660000.rkvdec to group 1
  275. [    0.217713] iommu: Adding device ff670000.iep to group 2
  276. [    0.217813] iommu: Adding device ff8f0000.vop to group 3
  277. [    0.217895] iommu: Adding device ff900000.vop to group 4
  278. [    0.218006] iommu: Adding device ff910000.isp to group 5
  279. [    0.218083] iommu: Adding device ff920000.isp to group 6
  280. [    0.218763] rk_iommu ff670800.iommu: can't get aclk
  281. [    0.218782] rk_iommu ff670800.iommu: can't get hclk
  282. [    0.219661] SCSI subsystem initialized
  283. [    0.219995] usbcore: registered new interface driver usbfs
  284. [    0.220042] usbcore: registered new interface driver hub
  285. [    0.220117] usbcore: registered new device driver usb
  286. [    0.220506] media: Linux media interface: v0.10
  287. [    0.220553] Linux video capture interface: v2.00
  288. [    0.220689] pps_core: LinuxPPS API ver. 1 registered
  289. [    0.220701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  290. [    0.220725] PTP clock support registered
  291. [    0.222242] Advanced Linux Sound Architecture Driver Initialized.
  292. [    0.222707] Bluetooth: Core ver 2.21
  293. [    0.222756] NET: Registered protocol family 31
  294. [    0.222768] Bluetooth: HCI device and connection manager initialized
  295. [    0.222786] Bluetooth: HCI socket layer initialized
  296. [    0.222801] Bluetooth: L2CAP socket layer initialized
  297. [    0.222830] Bluetooth: SCO socket layer initialized
  298. [    0.223856] rockchip-cpuinfo cpuinfo: Serial         : 9003721ebe94e80f
  299. [    0.224354] clocksource: Switched to clocksource arch_sys_counter
  300. [    0.268407] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  301. [    0.268648] NET: Registered protocol family 2
  302. [    0.269068] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  303. [    0.269212] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  304. [    0.269489] TCP: Hash tables configured (established 16384 bind 16384)
  305. [    0.269566] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  306. [    0.269629] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  307. [    0.269808] NET: Registered protocol family 1
  308. [    0.270318] Trying to unpack rootfs image as initramfs...
  309. [    0.610759] Freeing initrd memory: 7876K
  310. [    0.611303] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  311. [    0.611394] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  312. [    0.614022] audit: initializing netlink subsys (disabled)
  313. [    0.614096] audit: type=2000 audit(0.610:1): initialized
  314. [    0.619100] VFS: Disk quotas dquot_6.6.0
  315. [    0.619223] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  316. [    0.620591] fuse init (API version 7.23)
  317. [    0.621713]
  318. [    0.621713] TEE Core Framework initialization (ver 1:0.1)
  319. [    0.621745] TEE armv7 Driver initialization
  320. [    0.622117] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  321. [    0.622135] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  322. [    0.622333] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  323. [    0.626292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  324. [    0.626322] io scheduler noop registered
  325. [    0.626495] io scheduler cfq registered (default)
  326. [    0.627784] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
  327. [    0.628848] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
  328. [    0.634032] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
  329. [    0.634059] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  330. [    0.634083] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  331. [    1.154449] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
  332. [    1.155199] rockchip-pcie: probe of f8000000.pcie failed with error -110
  333. [    1.156634] backlight supply power not found, using dummy regulator
  334. [    1.157424] pwm-backlight backlight: invalid default brightness level: 200, using 105
  335. [    1.158963] iep: failed to find iep power down clock source.
  336. [    1.160013] IEP Power ON
  337. [    1.160466] IEP Power OFF
  338. [    1.160799] IEP Driver loaded succesfully
  339. [    1.161444] Module initialized.
  340. [    1.162074] rk-vcodec ff650000.vpu_service: probe device
  341. [    1.162130] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07c301c10
  342. [    1.162305] rk-vcodec ff650000.vpu_service: allocator is drm
  343. [    1.162360] rk-vcodec ff650000.vpu_service: checking hw id 0
  344. [    1.162849] rk-vcodec ff650000.vpu_service: init success
  345. [    1.163442] rk-vcodec ff660000.rkvdec: probe device
  346. [    1.163490] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07c302410
  347. [    1.163620] rk-vcodec ff660000.rkvdec: allocator is drm
  348. [    1.163675] rk-vcodec ff660000.rkvdec: checking hw id 6876
  349. [    1.163987] rk-vcodec ff660000.rkvdec: init success
  350. [    1.165713] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  351. [    1.165734] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  352. [    1.167051] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  353. [    1.167071] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  354. [    1.168730] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  355. [    1.170325] console [ttyS0] disabled
  356. [    1.17038h180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
  357. [    1.170970] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
  358. [    1.171437] [drm:drm_core_init] Initialized drm 1.1.0 20060810
  359. [    1.175417] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
  360. [    1.175650] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
  361. [    1.175681] rockchip-drm display-subsystem: failed to bind ff960000.dsi (ops dw_mipi_dsi_ops): -517
  362. [    1.175940] rockchip-drm display-subsystem: master bind failed: -517
  363. [    1.177481] ff960000.dsi.0 supply power not found, using dummy regulator
  364. [    1.177743] panel-simple-dsi ff960000.dsi.0: panel_simple_dsi_parse_dcs_cmds: dcs_cmd=29 len=243, cmd_cnt=27
  365. [    1.177763] panel-simple-dsi ff960000.dsi.0: panel_simple_dsi_parse_dcs_cmds: dcs_cmd=5 len=8, cmd_cnt=2
  366. [    1.178186] mali ff9a0000.gpu: Failed to get regulator
  367. [    1.178201] mali ff9a0000.gpu: Power control initialization failed
  368. [    1.178513] Unable to detect cache hierarchy from DT for CPU 0
  369. [    1.190093] brd: module loaded
  370. [    1.194805] loop: module loaded
  371. [    1.195329] zram: Added device: zram0
  372. [    1.195932] SCSI Media Changer driver v0.25
  373. [    1.197237] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  374. [    1.197260] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  375. [    1.198095] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max
  376. [    1.368440] wk2xxx_serial_init()
  377. [    1.368456] wk2xxx_request_port
  378. [    1.368470] ttysWK0 at I/O 0x1 (irq = 105, base_baud = 460800) is a wk2xxx
  379. [    1.368730] uart_add_one_port success for line i:= 0 with right 0
  380. [    1.368743] wk2xxx_request_port
  381. [    1.368755] ttysWK1 at I/O 0x2 (irq = 105, base_baud = 460800) is a wk2xxx
  382. [    1.368946] uart_add_one_port success for line i:= 1 with right 0
  383. [    1.368959] wk2xxx_request_port
  384. [    1.368971] ttysWK2 at I/O 0x3 (irq = 105, base_baud = 460800) is a wk2xxx
  385. [    1.369157] uart_add_one_port success for line i:= 2 with right 0
  386. [    1.369170] wk2xxx_request_port
  387. [    1.369181] ttysWK3 at I/O 0x4 (irq = 105, base_baud = 460800) is a wk2xxx
  388. [    1.369364] uart_add_one_port success for line i:= 3 with right 0
  389. [    1.369376] uart_add_one_port = 0x0
  390. [    1.369403] register spi return v = :0
  391. [    1.369455] tun: Universal TUN/TAP device driver, 1.6
  392. [    1.369466] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  393. [    1.370376] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
  394. [    1.370469] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  395. [    1.370489] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  396. [    1.370503] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
  397. [    1.370530] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  398. [    1.370703] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  399. [    1.375723] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  400. [    1.375851] stmmac - user ID: 0x10, Synopsys ID: 0x35
  401. [    1.375862]  Ring mode enabled
  402. [    1.375871]  DMA HW capability register supported
  403. [    1.375881]  Normal descriptors
  404. [    1.375892]  RX Checksum Offload Engine supported (type 2)
  405. [    1.375902]  Wake-Up On Lan supported
  406. [    1.375942]  Enable RX Mitigation via HW Watchdog Timer
  407. [    1.448821] libphy: stmmac: probed
  408. [    1.448864] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
  409. [    1.448883] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
  410. [    1.448901] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
  411. [    1.448918] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
  412. [    1.448933] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
  413. [    1.448946] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
  414. [    1.448958] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
  415. [    1.448971] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
  416. [    1.448982] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
  417. [    1.448994] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
  418. [    1.449006] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
  419. [    1.449018] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
  420. [    1.449030] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
  421. [    1.449041] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
  422. [    1.449053] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
  423. [    1.449064] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
  424. [    1.449076] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
  425. [    1.449087] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
  426. [    1.449099] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
  427. [    1.449111] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
  428. [    1.449122] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
  429. [    1.449134] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
  430. [    1.449146] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
  431. [    1.449158] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
  432. [    1.449169] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
  433. [    1.449181] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
  434. [    1.449193] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
  435. [    1.449205] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
  436. [    1.449217] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
  437. [    1.449228] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
  438. [    1.449241] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
  439. [    1.449253] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
  440. [    1.450125] PPP generic driver version 2.4.2
  441. [    1.450333] PPP BSD Compression module registered
  442. [    1.450348] PPP Deflate Compression module registered
  443. [    1.450382] PPP MPPE Compression module registered
  444. [    1.450400] NET: Registered protocol family 24
  445. [    1.450439] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  446. [    1.450453] CSLIP: code copyright 1989 Regents of the University of California.
  447. [    1.450524] usbcore: registered new interface driver mt7601u
  448. [    1.450547] Rockchip WiFi SYS interface (V1.00) ...
  449. [    1.450608] usbcore: registered new interface driver catc
  450. [    1.450650] usbcore: registered new interface driver kaweth
  451. [    1.450666] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  452. [    1.450705] usbcore: registered new interface driver pegasus
  453. [    1.450747] usbcore: registered new interface driver rtl8150
  454. [    1.450792] usbcore: registered new interface driver r8152
  455. [    1.450807] hso: drivers/net/usb/hso.c: Option Wireless
  456. [    1.450868] usbcore: registered new interface driver hso
  457. [    1.450915] usbcore: registered new interface driver asix
  458. [    1.450956] usbcore: registered new interface driver ax88179_178a
  459. [    1.450998] usbcore: registered new interface driver cdc_ether
  460. [    1.451069] usbcore: registered new interface driver cdc_eem
  461. [    1.451111] usbcore: registered new interface driver dm9601
  462. [    1.451165] usbcore: registered new interface driver smsc75xx
  463. [    1.451214] usbcore: registered new interface driver smsc95xx
  464. [    1.451264] usbcore: registered new interface driver gl620a
  465. [    1.451307] usbcore: registered new interface driver net1080
  466. [    1.451348] usbcore: registered new interface driver plusb
  467. [    1.451389] usbcore: registered new interface driver rndis_host
  468. [    1.451432] usbcore: registered new interface driver cdc_subset
  469. [    1.451473] usbcore: registered new interface driver zaurus
  470. [    1.451519] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  471. [    1.451577] usbcore: registered new interface driver int51x1
  472. [    1.451620] usbcore: registered new interface driver kalmia
  473. [    1.451662] usbcore: registered new interface driver ipheth
  474. [    1.451707] usbcore: registered new interface driver sierra_net
  475. [    1.451753] usbcore: registered new interface driver cx82310_eth
  476. [    1.451804] usbcore: registered new interface driver cdc_ncm
  477. [    1.451845] usbcore: registered new interface driver qmi_wwan
  478. [    1.451888] usbcore: registered new interface driver cdc_mbim
  479. [    1.457556] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd
  480. [    1.465510] rockchip-typec-phy ff800000.phy: Needed 1 loops to turn on
  481. [    1.465737] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
  482. [    1.466407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  483. [    1.466425] ehci-pci: EHCI PCI platform driver
  484. [    1.466485] ehci-platform: EHCI generic platform driver
  485. [    1.470134] ehci-platform fe380000.usb: EHCI Host Controller
  486. [    1.470166] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  487. [    1.470338] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  488. [    1.477704] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  489. [    1.477843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  490. [    1.477860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  491. [    1.477874] usb usb1: Product: EHCI Host Controller
  492. [    1.477887] usb usb1: Manufacturer: Linux 4.4.103 ehci_hcd
  493. [    1.477899] usb usb1: SerialNumber: fe380000.usb
  494. [    1.478565] hub 1-0:1.0: USB hub found
  495. [    1.478616] hub 1-0:1.0: 1 port detected
  496. [    1.482694] ehci-platform fe3c0000.usb: EHCI Host Controller
  497. [    1.482727] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  498. [    1.482895] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
  499. [    1.491067] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  500. [    1.491249] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  501. [    1.491266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  502. [    1.491281] usb usb2: Product: EHCI Host Controller
  503. [    1.491293] usb usb2: Manufacturer: Linux 4.4.103 ehci_hcd
  504. [    1.491306] usb usb2: SerialNumber: fe3c0000.usb
  505. [    1.491888] hub 2-0:1.0: USB hub found
  506. [    1.491928] hub 2-0:1.0: 1 port detected
  507. [    1.492761] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  508. [    1.492799] ohci-platform: OHCI generic platform driver
  509. [    1.493222] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  510. [    1.493254] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  511. [    1.493482] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  512. [    1.548560] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  513. [    1.548588] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  514. [    1.548605] usb usb3: Product: Generic Platform OHCI controller
  515. [    1.548619] usb usb3: Manufacturer: Linux 4.4.103 ohci_hcd
  516. [    1.548633] usb usb3: SerialNumber: fe3a0000.usb
  517. [    1.549228] hub 3-0:1.0: USB hub found
  518. [    1.549274] hub 3-0:1.0: 1 port detected
  519. [    1.549959] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  520. [    1.549991] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  521. [    1.550158] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
  522. [    1.605208] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  523. [    1.605248] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  524. [    1.605264] usb usb4: Product: Generic Platform OHCI controller
  525. [    1.605279] usb usb4: Manufacturer: Linux 4.4.103 ohci_hcd
  526. [    1.605294] usb usb4: SerialNumber: fe3e0000.usb
  527. [    1.605894] hub 4-0:1.0: USB hub found
  528. [    1.605934] hub 4-0:1.0: 1 port detected
  529. [    1.607323] usbcore: registered new interface driver cdc_acm
  530. [    1.607337] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  531. [    1.607421] usbcore: registered new interface driver usblp
  532. [    1.607486] usbcore: registered new interface driver cdc_wdm
  533. [    1.607552] usbcore: registered new interface driver uas
  534. [    1.607713] usbcore: registered new interface driver usb-storage
  535. [    1.607772] usbcore: registered new interface driver ums-alauda
  536. [    1.607835] usbcore: registered new interface driver ums-cypress
  537. [    1.607894] usbcore: registered new interface driver ums-datafab
  538. [    1.607950] usbcore: registered new interface driver ums_eneub6250
  539. [    1.608005] usbcore: registered new interface driver ums-freecom
  540. [    1.608063] usbcore: registered new interface driver ums-isd200
  541. [    1.608119] usbcore: registered new interface driver ums-jumpshot
  542. [    1.608175] usbcore: registered new interface driver ums-karma
  543. [    1.608234] usbcore: registered new interface driver ums-onetouch
  544. [    1.608296] usbcore: registered new interface driver ums-sddr09
  545. [    1.608354] usbcore: registered new interface driver ums-sddr55
  546. [    1.608412] usbcore: registered new interface driver ums-usbat
  547. [    1.608522] usbcore: registered new interface driver usbserial
  548. [    1.608573] usbcore: registered new interface driver usbserial_generic
  549. [    1.608613] usbserial: USB Serial support registered for generic
  550. [    1.608674] usbcore: registered new interface driver ch341
  551. [    1.608716] usbserial: USB Serial support registered for ch341-uart
  552. [    1.608777] usbcore: registered new interface driver cp210x
  553. [    1.608815] usbserial: USB Serial support registered for cp210x
  554. [    1.608902] usbcore: registered new interface driver option
  555. [    1.608940] usbserial: USB Serial support registered for GSM modem (1-port)
  556. [    1.609213] usbcore: registered new interface driver pl2303
  557. [    1.609253] usbserial: USB Serial support registered for pl2303
  558. [    1.609332] usbcore: registered new interface driver trancevibrator
  559. [    1.609349] usb20_otg: version 3.10a 21-DEC-2012
  560. [    1.609644] usb20_host: version 3.10a 21-DEC-2012
  561. [    1.610320] usbcore: registered new interface driver xpad
  562. [    1.610387] usbcore: registered new interface driver usb_acecad
  563. [    1.610459] usbcore: registered new interface driver aiptek
  564. [    1.610524] usbcore: registered new interface driver gtco
  565. [    1.610589] usbcore: registered new interface driver hanwang
  566. [    1.610651] usbcore: registered new interface driver kbtab
  567. [    1.610668] ==gsl_ts_init==
  568. [    1.610708] ret=0
  569. [    1.611418] .. rk pwm remotectl v1.1 init
  570. [    1.611737] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
  571. [    1.612361] sensor_register_slave:mma8452,id=17
  572. [    1.612380] sensor_register_slave:lis3dh,id=7
  573. [    1.612397] sensor_register_slave:mma7660,id=18
  574. [    1.612414] sensor_register_slave:lsm303d,id=22
  575. [    1.612430] sensor_register_slave:gs_mc3230,id=23
  576. [    1.612439] [Gsensor]   gsensor_init
  577. [    1.612455] sensor_register_slave:mpu6880_acc,id=24
  578. [    1.612473] sensor_register_slave:mpu6500_acc,id=25
  579. [    1.612489] sensor_register_slave:lsm330_acc,id=26
  580. [    1.612506] sensor_register_slave:akm8975,id=29
  581. [    1.612523] sensor_register_slave:akm8963,id=30
  582. [    1.612539] sensor_register_slave:l3g4200d,id=44
  583. [    1.612555] sensor_register_slave:l3g20d,id=45
  584. [    1.612572] sensor_register_slave:ewtsa,id=46
  585. [    1.612588] sensor_register_slave:lsm330_gyro,id=50
  586. [    1.612604] sensor_register_slave:cm3217,id=52
  587. [    1.612621] sensor_register_slave:cm3218,id=53
  588. [    1.613565] i2c /dev entries driver
  589. [    1.615111] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  590. [    1.615229] fan53555-reg: supplied by vcc5v0_sys
  591. [    1.617291] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  592. [    1.617366] fan53555-reg: supplied by vcc5v0_sys
  593. [    1.619620] rk808 0-001b: Pmic Chip id: 0x0
  594. [    1.623501] rk808-regulator rk808-regulator: there is no dvs0 gpio
  595. [    1.623577] rk808-regulator rk808-regulator: there is no dvs1 gpio
  596. [    1.623705] DCDC_REG1: supplied by vcc3v3_sys
  597. [    1.624591] DCDC_REG2: supplied by vcc3v3_sys
  598. [    1.625215] DCDC_REG3: supplied by vcc3v3_sys
  599. [    1.625488] DCDC_REG4: supplied by vcc3v3_sys
  600. [    1.625994] LDO_REG1: supplied by vcc3v3_sys
  601. [    1.627174] LDO_REG2: supplied by vcc3v3_sys
  602. [    1.628194] LDO_REG3: supplied by vcc3v3_sys
  603. [    1.629237] LDO_REG4: supplied by vcc3v3_sys
  604. [    1.630244] LDO_REG5: supplied by vcc3v3_sys
  605. [    1.631281] LDO_REG6: supplied by vcc3v3_sys
  606. [    1.632278] LDO_REG7: supplied by vcc3v3_sys
  607. [    1.633312] LDO_REG8: supplied by vcc3v3_sys
  608. [    1.634295] SWITCH_REG1: supplied by vcc3v3_sys
  609. [    1.634605] SWITCH_REG2: supplied by vcc3v3_sys
  610. [    1.638426] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  611. [    1.639048] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009942000
  612. [    1.639951] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009944000
  613. [    1.640078] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
  614. [    1.640096] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
  615. [    1.640112] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xfer  on device rockchip-pinctrl
  616. [    1.640127] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
  617. [    1.640580] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff8009946000
  618. [    1.641420] GSLX680 Enter gsl_ts_probe
  619. [    1.797704] usb 2-1: new high-speed USB device number 2 using ehci-platform
  620. [    1.921696] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
  621. [    1.921736] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  622. [    1.921757] usb 2-1: Product: USB 2.0 Hub [MTT]
  623. [    1.922314] hub 2-1:1.0: USB hub found
  624. [    1.922444] hub 2-1:1.0: 7 ports detected
  625. [    1.951046] gsl_ts_probe--1305, i2c_master_recv fail
  626. [    1.951123] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009948000
  627. [    1.952362] IR NEC protocol handler initialized
  628. [    1.952402] IR RC5(x/sz) protocol handler initialized
  629. [    1.952420] IR RC6 protocol handler initialized
  630. [    1.952436] IR JVC protocol handler initialized
  631. [    1.952452] IR Sony protocol handler initialized
  632. [    1.952465] IR SANYO protocol handler initialized
  633. [    1.952479] IR Sharp protocol handler initialized
  634. [    1.952493] IR MCE Keyboard/mouse protocol handler initialized
  635. [    1.952508] IR XMP protocol handler initialized
  636. [    1.952823] usbcore: registered new interface driver uvcvideo
  637. [    1.952834] USB Video Class driver (1.1.1)
  638. [    1.952854] CamSys driver version: v0.38.0, CamSys head file version: v1.0.0
  639. [    1.958789] __power_supply_register: Expected proper parent device for 'test_ac'
  640. [    1.959008] __power_supply_register: Expected proper parent device for 'test_battery'
  641. [    1.959324] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
  642. [    1.959448] __power_supply_register: Expected proper parent device for 'test_usb'
  643. [    1.962778] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  644. [    1.964206] device-mapper: uevent: version 1.0.3
  645. [    1.964642] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  646. [    1.964894] Bluetooth: HCI UART driver ver 2.3
  647. [    1.964909] Bluetooth: HCI UART protocol H4 registered
  648. [    1.964919] Bluetooth: HCI UART protocol LL registered
  649. [    1.964935] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
  650. [    1.964945] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
  651. [    1.964955] rtk_btusb: Register usb char device interface for BT driver
  652. [    1.965241] usbcore: registered new interface driver rtk_btusb
  653. [    1.965817] cpu cpu0: leakage=19
  654. [    1.983472] cpu cpu0: temp=46250, pvtm=147784 (147454 + 330)
  655. [    1.983894] cpu cpu0: pvtm-sel=1
  656. [    1.984313] cpu cpu4: leakage=36
  657. [    1.996540] cpu cpu4: temp=46250, pvtm=154617 (154442 + 175)
  658. [    1.996695] cpu cpu4: pvtm-sel=1
  659. [    2.002280] sdhci: Secure Digital Host Controller Interface driver
  660. [    2.002329] sdhci: Copyright(c) Pierre Ossman
  661. [    2.002350] Synopsys Designware Multimedia Card Interface Driver
  662. [    2.003578] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  663. [    2.003736] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  664. [    2.003758] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  665. [    2.003819] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  666. [    2.003847] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
  667. [    2.003902] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  668. [    2.003915] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  669. [    2.005022] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  670. [    2.005149] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  671. [    2.005169] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  672. [    2.005220] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  673. [    2.005246] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  674. [    2.005362] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  675. [    2.006271] sdhci-pltfm: SDHCI platform and OF driver helper
  676. [    2.008220] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  677. [    2.008236] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  678. [    2.034479] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  679. [    2.036638] hidraw: raw HID events driver (C) Jiri Kosina
  680. [    2.041304] usbcore: registered new interface driver usbhid
  681. [    2.041322] usbhid: USB HID core driver
  682. [    2.041483] inv_mpu_iio: inv_mpu_init:746
  683. [    2.042050] ashmem: initialized
  684. [    2.044717] ff100000.saradc supply vref not found, using dummy regulator
  685. [    2.050487] rknandbase v1.1 2016-11-08
  686. [    2.051160] usbcore: registered new interface driver snd-usb-audio
  687. [    2.052546] rt5640 1-001c: Can not read property hp-con-gpio
  688. [    2.052590] rt5640 1-001c: Can not read property: linein-mute.
  689. [    2.065202] lkd tc358749x_parse_dts: power(1)
  690. [    2.065301] lkd tc358749x_parse_dts: int(0)
  691. [    2.065389] lkd tc358749x_parse_dts: reset(1)
  692. [    2.075878] mmc0: MAN_BKOPS_EN bit is not set
  693. [    2.076457] tc358749x 1-000f: tc358749x_parse_dts success
  694. [    2.076627] tc358749x 1-000f: tc358749x_i2c_probe success
  695. [    2.082249] u32 classifier
  696. [    2.082283]     Actions configured
  697. [    2.082353] Netfilter messages via NETLINK v0.30.
  698. [    2.082439] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  699. [    2.082931] ctnetlink v0.93: registering with nfnetlink.
  700. [    2.083805] xt_time: kernel timezone is -0000
  701. [    2.084676] ip_tables: (C) 2000-2006 Netfilter Core Team
  702. [    2.084865] arp_tables: (C) 2002 David S. Miller
  703. [    2.085284] Initializing XFRM netlink socket
  704. [    2.085730] NET: Registered protocol family 10
  705. [    2.086700] mip6: Mobile IPv6
  706. [    2.086736] ip6_tables: (C) 2000-2006 Netfilter Core Team
  707. [    2.087883] sit: IPv6 over IPv4 tunneling driver
  708. [    2.088351] NET: Registered protocol family 17
  709. [    2.088382] NET: Registered protocol family 15
  710. [    2.088422] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  711. [    2.088658] mmc0: new HS400 Enhanced strobe MMC card at address 0001
  712. [    2.089076] Bridge firewalling registered
  713. [    2.089096] Ebtables v2.0 registered
  714. [    2.089219] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
  715. [    2.089389] Bluetooth: RFCOMM TTY layer initialized
  716. [    2.089412] Bluetooth: RFCOMM socket layer initialized
  717. [    2.089438] Bluetooth: RFCOMM ver 1.11
  718. [    2.089464] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  719. [    2.089475] Bluetooth: BNEP filters: protocol multicast
  720. [    2.089491] Bluetooth: BNEP socket layer initialized
  721. [    2.089509] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  722. [    2.089524] Bluetooth: HIDP socket layer initialized
  723. [    2.089542] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB
  724. [    2.089561] l2tp_core: L2TP core driver, V2.0
  725. [    2.089584] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  726. [    2.089613] [WLAN_RFKILL]: Enter rfkill_wlan_init
  727. [    2.089831] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB
  728. [    2.089912] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  729. [    2.089969] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
  730. [    2.089981] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  731. [    2.089994] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  732. [    2.090071] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
  733. [    2.090085] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  734. [    2.090098] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  735. [    2.090119] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB
  736. [    2.090156] [BT_RFKILL]: Enter rfkill_rk_init
  737. [    2.090535] rkpart: partition size too small (0)
  738. [    2.090557]  parameter: 0x000000000 -- 0x000400000 (4 MB)
  739. [    2.090571]      uboot: 0x000400000 -- 0x000800000 (4 MB)
  740. [    2.090584]      trust: 0x000800000 -- 0x000c00000 (4 MB)
  741. [    2.090600] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
  742. [    2.090617]       misc: 0x000c00000 -- 0x001000000 (4 MB)
  743. [    2.090630] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
  744. [    2.090644]   resource: 0x001000000 -- 0x002000000 (16 MB)
  745. [    2.090652] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
  746. [    2.090673]     kernel: 0x002000000 -- 0x003800000 (24 MB)
  747. [    2.090678]      800000 -- 0x005800000 (32 MB)
  748. [    2.090683]   recovery: 0x005800000 -- 0x007800000 (32 MB)
  749. [    2.090687]     backup: 0x007800000 -- 0x00e800000 (112 MB)
  750. [    2.090691]      cache: 0x00e800000 -- 0x016800000 (128 MB)
  751. [    2.090694]     system: 0x016800000 -- 0x076800000 (1536 MB)
  752. [    2.090699]   metadata: 0x076800000 -- 0x077800000 (16 MB)
  753. [    2.090702] baseparamer: 0x077800000 -- 0x077c00000 (4 MB)
  754. [    2.090706]   userdata: 0x077c00000 -- 0x3a3a00000 (12990 MB)
  755. [    2.090750] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
  756. [    2.091358]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
  757. [    2.091359] [BT_RFKILL]: Request irq for bt wakeup host
  758. [    2.091413] [BT_RFKILL]: BT_WAKE_HOST IRQ fired
  759. [    2.091440] [BT_RFKILL]: ** disable irq
  760. [    2.091696] [BT_RFKILL]: bt_default device registered.
  761. [    2.091985] sensor_register_slave:mpu6880_gyro,id=49
  762. [    2.093785] Registered cp15_barrier emulation handler
  763. [    2.093874] vendor storage:20160801 ret = 0
  764. [    2.093881] Registered setend emulation handler
  765. [    2.094692] registered taskstats version 1
  766. [    2.095705] rockchip ion idev is NULL
  767. [    2.095725] rga2 ff680000.rga: rga ion client create success!
  768. [    2.095939] rga: Driver loaded successfully ver:3.02
  769. [    2.097741] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
  770. [    2.098031] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
  771. [    2.098113] rockchip-drm display-subsystem: bound ff960000.dsi (ops dw_mipi_dsi_ops)
  772. [    2.098652] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
  773. [    2.098693] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
  774. [    2.098786] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  775. [    2.103228] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
  776. [    2.103250] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
  777. [    2.103265] [drm:drm_vblank_init] No driver support for vblank timestamp query.
  778. [    2.140456] rockchip-drm display-subsystem: fb0:  frame buffer device
  779. [    2.154031] mali ff9a0000.gpu: leakage=25
  780. [    2.167173] mali ff9a0000.gpu: temp=46875, pvtm=122757 (122697 + 60)
  781. [    2.168694] mali ff9a0000.gpu: pvtm-sel=1
  782. [    2.170032] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  783. [    2.171537] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 284; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  784. [    2.172240] mali ff9a0000.gpu: Probed as mali0
  785. [    2.177871] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
  786. [    2.177913] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
  787. [    2.178137] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  788. [    2.178181] xhci-hcd xhci-hcd.9.auto: irq 236, io mem 0xfe800000
  789. [    2.178296] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  790. [    2.178312] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  791. [    2.178324] usb usb5: Product: xHCI Host Controller
  792. [    2.178335] usb usb5: Manufacturer: Linux 4.4.103 xhci-hcd
  793. [    2.178345] usb usb5: SerialNumber: xhci-hcd.9.auto
  794. [    2.178817] hub 5-0:1.0: USB hub found
  795. [    2.178846] hub 5-0:1.0: 1 port detected
  796. [    2.179063] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
  797. [    2.179080] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
  798. [    2.179134] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  799. [    2.179212] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
  800. [    2.179225] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  801. [    2.179237] usb usb6: Product: xHCI Host Controller
  802. [    2.179247] usb usb6: Manufacturer: Linux 4.4.103 xhci-hcd
  803. [    2.179257] usb usb6: SerialNumber: xhci-hcd.9.auto
  804. [    2.179618] hub 6-0:1.0: USB hub found
  805. [    2.179644] hub 6-0:1.0: 1 port detected
  806. [    2.180727] xhci-hcd xhci-hcd.9.auto: remove, state 1
  807. [    2.180750] usb usb6: USB disconnect, device number 1
  808. [    2.204530] xhci-hcd xhci-hcd.9.auto: Host not halted after 16000 microseconds.
  809. [    2.204564] xhci-hcd xhci-hcd.9.auto: Host controller not halted, aborting reset.
  810. [    2.204602] xhci-hcd xhci-hcd.9.auto: USB bus 6 deregistered
  811. [    2.204616] xhci-hcd xhci-hcd.9.auto: remove, state 1
  812. [    2.204634] usb usb5: USB disconnect, device number 1
  813. [    2.205056] xhci-hcd xhci-hcd.9.auto: USB bus 5 deregistered
  814. [    2.209244] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
  815. [    2.209284] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5
  816. [    2.209480] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  817. [    2.209518] xhci-hcd xhci-hcd.10.auto: irq 237, io mem 0xfe900000
  818. [    2.209625] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  819. [    2.209637] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  820. [    2.209647] usb usb5: Product: xHCI Host Controller
  821. [    2.209656] usb usb5: Manufacturer: Linux 4.4.103 xhci-hcd
  822. [    2.209665] usb usb5: SerialNumber: xhci-hcd.10.auto
  823. [    2.210075] hub 5-0:1.0: USB hub found
  824. [    2.210099] hub 5-0:1.0: 1 port detected
  825. [    2.210276] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
  826. [    2.210291] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6
  827. [    2.210336] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  828. [    2.210401] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
  829. [    2.210412] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  830. [    2.210422] usb usb6: Product: xHCI Host Controller
  831. [    2.210430] usb usb6: Manufacturer: Linux 4.4.103 xhci-hcd
  832. [    2.210439] usb usb6: SerialNumber: xhci-hcd.10.auto
  833. [    2.210734] hub 6-0:1.0: USB hub found
  834. [    2.210757] hub 6-0:1.0: 1 port detected
  835. [    2.211588] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  836. [    2.211671] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  837. [    2.211688] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  838. [    2.211713] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  839. [    2.211734] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
  840. [    2.211772] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  841. [    2.211781] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  842. [    2.211997] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  843. [    2.224404] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  844. [    2.237761] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
  845. [    2.238445] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  846. [    2.238521] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  847. [    2.238537] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  848. [    2.238562] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  849. [    2.238581] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  850. [    2.238650] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  851. [    2.238936] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq
  852. [    2.239041] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  853. [    2.239450] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  854. [    2.251214] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  855. [    2.264497] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  856. [    2.265758] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
  857. [    2.281228] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
  858. [    2.282754] asoc-simple-card rt5640-sound: rt5640-aif2 <-> ff890000.i2s mapping ok
  859. [    2.283484] asoc-simple-card rt5640-sound: tc358749x-audio <-> ff890000.i2s mapping ok
  860. [    2.284072] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  861. [    2.285757] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  862. [    2.287452] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  863. [    2.289891] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1
  864. [    2.290486] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  865. [    2.293067] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
  866. [    2.295305] otg_wakelock_init: No USB transceiver found
  867. [    2.296802] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:03 UTC (1358499003)
  868. [    2.298291] It doesn't contain Rogue gpu
  869. u   2.329230]
  870. [    2.349981] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
复制代码



回复

使用道具 举报

16

积分

0

威望

0

贡献

技术小白

积分
16
发表于 2019-5-4 22:53:21        只看该作者  沙发
沙发自抢,求大神解答!!!
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表