|
|
【技术讨论】
把Android8.1.0_190801系统固件烧写进ROC-RK3328-PC 开发板芯片里不能正常启动
发表于 2020-6-9 11:34:10
浏览：6412
|
回复：2
打印
只看该作者
[复制链接]
楼主
DDR version 1.16 20190528
ID:0x805 N
In
DDR3
333MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
ddrconfig:1
OUT
Boot1 Release Time: Feb 2 2018 15:41:39, version: 2.46
ChipType = 0x11, 193
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7456MB
FwPartOffset=2000 , 2000
SdmmcInit=0 2
StorageInit ok = 19049
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa515c
RunBL31 0x10000
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-170-gc4654a6 #14 Wed May 30 08:34:20 UTC 2018 aarch64)
INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
U-Boot 2014.10-RK3328-06 (Aug 01 2019 - 10:50:15)
CPU: rk3328
cpu version = 1
CPU's clock information:
arm pll = 600000000HZ
general pll = 1200000000HZ
ddr pll = 664000000HZ
codec pll = 1200000000HZ
new pll = 594000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks: 1
Adding bank:0000000000200000(000000003fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 20
SdmmcInit = 2 0
storage init OK!
Using default environment
GetParam
remotectl v0.1
pwm freq=0x23c346
pwm_freq_nstime=0x1aa
Load FDT from resource image.
no key node
can't find dts node for fixed
rk816_set_regulator_init vdd_arm init uV:1225000
pmic:rk805
can't find dts node for pwm0
CPU's clock information:
arm pll = 1200000000HZ
general pll = 1200000000HZ
ddr pll = 664000000HZ
codec pll = 1200000000HZ
new pll = 594000000HZ
invalide header tag
ca head not found
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2019-08-01#2.46
empty serial no.
normal boot.
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
Rockchip UBOOT DRM driver version: develop-v1.0.0
use default hdmi phy table
failed to find panel driver
failed to find panel driver
read logo on state from dts [1]
no fuel gauge found
inno_hdmi_phy_clk_set_rate rate 27000000 tmdsclk 27000000
rockchip_panel_deinit: failed to find panel deinit funcs
can't find dts node for rk312x-tve
can't find dts node for rk322x-tve
Warn: vop clk request 13500000hz, but real clock is 594000000hz
rockchip_panel_prepare: failed to find panel prepare funcs
rockchip_panel_enable: failed to find panel prepare funcs
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
Hit any key to stop autoboot: 0
load fdt from resouce.
Secure Boot state: 0
kernel @ 0x00280000 (0x01217808)
ramdisk @ 0x04bf0000 (0x0016c51c)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000004600000, end 0000000004612160 ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:000000000a200000, 0000000035e00000
WARNING: could not set reg FDT_ERR_BADOFFSET.
Starting kernel ...
|
|
