官方提供的os04a10摄像头模组出现I2C不通，请教应该如何调试

CameraThreeBody

官方提供的os04a10摄像头模组无法使用
使用Media-ctrl查看，无os04a10相关的entiy。
查看dmesg，发现sensor启动失败。不清楚是版本不匹配，还是这个模组就出问题了，连线已经多次确认。

        行 1199: [    0.727462] os04a10 1-0036: driver version: 00.01.05
        行 1201: [    0.727513] os04a10 1-0036:  Get hdr mode failed! no hdr default
        行 1203: [    0.727550] os04a10 1-0036: GPIO lookup for consumer reset
        行 1205: [    0.727565] os04a10 1-0036: using device tree for GPIO lookup
        行 1207: [    0.727603] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff510000/os04a10@36[0]' - status (0)
        行 1213: [    0.727630] os04a10 1-0036: GPIO lookup for consumer pwdn
        行 1215: [    0.727634] os04a10 1-0036: using device tree for GPIO lookup
        行 1217: [    0.727651] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff510000/os04a10@36[0]' - status (0)
        行 1223: [    0.727734] os04a10 1-0036: could not get sleep pinstate
        行 1225: [    0.727880] os04a10 1-0036: Linked as a consumer to regulator.18
        行 1227: [    0.727993] os04a10 1-0036: Linked as a consumer to regulator.15
        行 1229: [    0.728096] os04a10 1-0036: Linked as a consumer to regulator.17
        行 1239: [    0.739956] os04a10 1-0036: Unexpected sensor id(000000), ret(-5)
        行 1241: [    0.740275] os04a10 1-0036: Dropping the link to regulator.18
        行 1243: [    0.740420] os04a10 1-0036: Dropping the link to regulator.15
        行 1245: [    0.740555] os04a10 1-0036: Dropping the link to regulator.17

吴凡

看看。很厉害的样子

799959745

烧公版固件可以吗？可能是排针座子没插好

799959745

公版固件不行的话走售后吧