RK3399 LINUX SDK 无法启动

xfan

SDK: linux-sdk.7z
来源: https://pan.baidu.com/s/1NXcFa3F ... 670-539758088014873
MD5: e20d13ef2568efa4a653a4b5c983d49f

全自动编译，执行./build.sh编译成功
使用AndroidTool_Release_v2.63烧录rockdev/update.img (size: 523551192)成功
但系统无法正常启动，当输出如下信息以后不再有任何反应

[    1.236883] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.237565] dma-pl330 ff6d0000.dma-controller:     DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.239811] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.240480] dma-pl330 ff6e0000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16


请教一下如何解决这个问题？开发板型号：firefly-rk3399

完整串口日志如下

DDR Version 1.14 20180803
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x32817281, stride = 0x9
OUT
Boot1: 2018-08-06, version: 1.15
CPUId = 0x0
ChipType = 0x10, 214
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67768
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x10000
GPT part:  4, name:         recovery, start:0x1a000, size:0x10000
GPT part:  5, name:           backup, start:0x2a000, size:0x10000
GPT part:  6, name:              oem, start:0x3a000, size:0x20000
GPT part:  7, name:           rootfs, start:0x5a000, size:0x100000
GPT part:  8, name:         userdata, start:0x15a000, size:0x1bc4fdf
find partition:uboot OK. first_lba:0x4000.
find partition:trust OK. first_lba:0x6000.
LoadTrust Addr:0x6000
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xc5cf8
RunBL31 0x10000
NOTICE:  BL31: v1.3(debug):56eea3d
NOTICE:  BL31: Built : 15:27:37, Aug  8 2018
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1151): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-170-gc4654a6 #16 Wed May 30 08:54:30 UTC 2018 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-g73d3fd4b32-dirty (Dec 02 2019 - 21:16:23 +0800)

Model: Rockchip RK3399 Evaluation Board
DRAM:  2 GiB
Relocation Offset is: 7dc08000
PMIC:  RK808
pwm-regulator(vdd-center): init 950000 uV
vdd_center 950000 uV
regulator(vdd-center) init 950000 uV
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
Using default environment

Can't get mcu-pix-total
Warn: can't find phy driver
In:    serial
Out:   serial
Err:   serial
Model: Rockchip RK3399 Evaluation Board
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
enter Recovery mode!
Rockchip UBOOT DRM driver version: v1.0.0
Using display timing dts
Detailed mode clock 200000 kHz, flags[a]
    H: 1536 1548 1564 1612
    V: 2048 2056 2060 2068
bus_format: 100e
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-110)
AUX CH command reply failed!
AUX CH command reply failed!
AUX CH command reply failed!
Rx Max Link Rate is abnormal :ff !
AUX CH command reply failed!
LT link start failed!
eDP link training failed (-121)
unable to do link train
Net:   eth0: ethernet@fe300000
Hit any key to stop autoboot:  0
ANDROID: reboot reason: "recovery"
Error: Bad gzipped data
FDT load addr 0x10f00000 size 225 KiB
Booting kernel at 0x207f800 with fdt at 3947e00...


## Booting Android Image at 0x0207f800 ...
Kernel load addr 0x02080000 size 18985 KiB
RAM disk load addr 0x11000000 size 6387 KiB
## Flattened Device Tree blob at 03947e00
   Booting using the fdt blob at 0x3947e00
   XIP Kernel Image ... OK
   Loading Ramdisk to 07bc3000, end 081ffbf8 ... OK
   Loading Device Tree to 0000000007ba7000, end 0000000007bc263f ... OK
Adding bank: start=0x00200000, size=0x08200000
Adding bank: start=0x0a200000, size=0x75e00000
Can't find file:logo_kernel.bmp

Starting kernel ...


[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.154 (xiaofan@kubuntu) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP Mon Dec 2 18:50:01 CST 2019
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fee7000 s45800 r8192 d32024 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 507912
[    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc androidboot.slot_suffix= androidboot.serialno=501e5b82714e4d20  rw rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=ext4
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB [mem 0x7fe9f000-0x7fedf000] (0MB) mapped at [ffffffc07fe9f000-ffffffc07fedefff]
[    0.000000] Memory: 2000208K/2064384K available (11646K kernel code, 1704K rwdata, 4452K rodata, 1152K init, 760K bss, 64176K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009040000 - 0xffffff8009160000   (  1152 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008be0000   ( 11648 KB)
[    0.000000]     .rodata : 0xffffff8008be0000 - 0xffffff8009040000   (  4480 KB)
[    0.000000]       .data : 0xffffff8009160000 - 0xffffff800930a008   (  1705 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @a300000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x000000000a290000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x000000000a2a0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002154] Console: colour dummy device 80x25
[    0.002597] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003587] pid_max: default: 32768 minimum: 301
[    0.004171] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.004824] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.006209] Initializing cgroup subsys devices
[    0.006645] Initializing cgroup subsys freezer
[    0.007102] ftrace: allocating 42156 entries in 165 pages
[    0.112447] sched-energy: Sched-energy-costs installed from DT
[    0.113013] CPU0: update cpu_capacity 401
[    0.113452] ASID allocator initialised with 32768 entries
[    0.117157] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.118488] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.120714] Detected VIPT I-cache on CPU1
[    0.120747] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.120777] CPU1: using LPI pending table @0x0000000000320000
[    0.120818] CPU1: update cpu_capacity 401
[    0.120823] CPU1: Booted secondary processor [410fd034]
[    0.121364] Detected VIPT I-cache on CPU2
[    0.121385] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.121412] CPU2: using LPI pending table @0x0000000000340000
[    0.121438] CPU2: update cpu_capacity 401
[    0.121442] CPU2: Booted secondary processor [410fd034]
[    0.121960] Detected VIPT I-cache on CPU3
[    0.121981] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.122008] CPU3: using LPI pending table @0x0000000000390000
[    0.122034] CPU3: update cpu_capacity 401
[    0.122038] CPU3: Booted secondary processor [410fd034]
[    0.122586] Detected PIPT I-cache on CPU4
[    0.122612] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.122650] CPU4: using LPI pending table @0x00000000003d0000
[    0.122688] CPU4: update cpu_capacity 1024
[    0.122691] CPU4: Booted secondary processor [410fd082]
[    0.123240] Detected PIPT I-cache on CPU5
[    0.123259] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.123297] CPU5: using LPI pending table @0x000000007d000000
[    0.123323] CPU5: update cpu_capacity 1024
[    0.123327] CPU5: Booted secondary processor [410fd082]
[    0.123412] Brought up 6 CPUs
[    0.135790] SMP: Total of 6 processors activated.
[    0.136242] CPU features: detected feature: GIC system register CPU interface
[    0.136935] CPU: All CPU(s) started at EL2
[    0.137367] alternatives: patching kernel code
[    0.139161] devtmpfs: initialized
[    0.156581] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.157525] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.158561] pinctrl core: initialized pinctrl subsystem
[    0.159796] NET: Registered protocol family 16
[    0.165275] cpuidle: using governor ladder
[    0.169284] cpuidle: using governor menu
[    0.169697] Registered FIQ tty driver
[    0.170349] vdso: 2 pages (1 code @ ffffff8008be6000, 1 data @ ffffff8009164000)
[    0.171071] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.171864] DMA: preallocated 256 KiB pool for atomic allocations
[    0.196755] console [ttyFIQ0] enabled
[    0.196755] console [ttyFIQ0] enabled
[    0.197429] bootconsole [uart0] disabled
[    0.197429] bootconsole [uart0] disabled
[    0.198364] Registered fiq debugger ttyFIQ0
[    0.228436] iommu: Adding device ff650000.vpu_service to group 0
[    0.229029] iommu: Adding device ff660000.rkvdec to group 1
[    0.229620] iommu: Adding device ff8f0000.vop to group 2
[    0.230159] iommu: Adding device ff900000.vop to group 3
[    0.230758] iommu: Adding device ff910000.cif_isp to group 4
[    0.231333] iommu: Adding device ff920000.cif_isp to group 5
[    0.233453] SCSI subsystem initialized
[    0.233976] usbcore: registered new interface driver usbfs
[    0.234505] usbcore: registered new interface driver hub
[    0.235056] usbcore: registered new device driver usb
[    0.235567] media: Linux media interface: v0.10
[    0.236008] Linux video capture interface: v2.00
[    0.236458] pps_core: LinuxPPS API ver. 1 registered
[    0.236902] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.237726] PTP clock support registered
[    0.239142] Advanced Linux Sound Architecture Driver Initialized.
[    0.240147] Bluetooth: Core ver 2.21
[    0.240484] NET: Registered protocol family 31
[    0.240892] Bluetooth: HCI device and connection manager initialized
[    0.241458] Bluetooth: HCI socket layer initialized
[    0.241901] Bluetooth: L2CAP socket layer initialized
[    0.242362] Bluetooth: SCO socket layer initialized
[    0.243402] rockchip-cpuinfo cpuinfo: Serial        : 501e5b82714e4d20
[    0.244519] clocksource: Switched to clocksource arch_sys_counter
[    0.292896] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.293824] NET: Registered protocol family 2
[    0.294661] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.295431] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[    0.296472] TCP: Hash tables configured (established 16384 bind 16384)
[    0.297135] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[    0.297756] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[    0.298613] NET: Registered protocol family 1
[    0.299295] RPC: Registered named UNIX socket transport module.
[    0.299843] RPC: Registered udp transport module.
[    0.300263] RPC: Registered tcp transport module.
[    0.300694] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.301946] Trying to unpack rootfs image as initramfs...
[    0.647314] Freeing initrd memory: 6384K
[    0.648148] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.648966] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.652850] Initialise system trusted keyring
[    0.661043] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.662347] NFS: Registering the id_resolver key type
[    0.662827] Key type id_resolver registered
[    0.663202] Key type id_legacy registered
[    0.663657] fuse init (API version 7.23)
[    0.664386] SGI XFS with security attributes, no debug enabled
[    0.669673] NET: Registered protocol family 38
[    0.670087] Key type asymmetric registered
[    0.670456] Asymmetric key parser 'x509' registered
[    0.671058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.671728] io scheduler noop registered
[    0.672085] io scheduler deadline registered
[    0.672589] io scheduler cfq registered (default)
[    0.674624] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
[    0.680190] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    0.680787] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    0.681368] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.223577] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.224300] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.225854] backlight supply power not found, using dummy regulator
[    1.227167] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    1.228122] rk-vcodec ff650000.vpu_service: probe device
[    1.228921] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    1.230261] rk-vcodec ff650000.vpu_service: could not find power_model node
[    1.230898] rk-vcodec ff650000.vpu_service: init success
[    1.231776] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    1.232789] rk-vcodec ff660000.rkvdec: probe device
[    1.233438] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    1.234412] rk-vcodec ff660000.rkvdec: could not find power_model node
[    1.235001] rk-vcodec ff660000.rkvdec: init success
[    1.236883] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.237565] dma-pl330 ff6d0000.dma-controller:     DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.239811] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.240480] dma-pl330 ff6e0000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16

Negro旋

仓库有更新到最新吗？你把SDK下的 device/rockchip/.BoardConfig.mk 的内容发出来看下。

xfan

仓库没更新到最新。我直接使用压缩包里的源码编译的。

我先更新到最新再编译一次测试一下

device/rockchip/.BoardConfig.mk

1. #!/bin/bash
   
2. 
   
3. # Target arch
   
4. export RK_ARCH=arm64
   
5. # Uboot defconfig
   
6. export RK_UBOOT_DEFCONFIG=evb-rk3399
   
7. # Kernel defconfig
   
8. export RK_KERNEL_DEFCONFIG=rockchip_linux_defconfig
   
9. # Kernel dts
   
10. export RK_KERNEL_DTS=rk3399-sapphire-excavator-linux
    
11. # boot image type
    
12. export RK_BOOT_IMG=boot.img
    
13. # parameter for GPT table
    
14. export RK_PARAMETER=parameter-buildroot.txt
    
15. # Buildroot config
    
16. export RK_CFG_BUILDROOT=rockchip_rk3399
    
17. # Recovery config
    
18. export RK_CFG_RECOVERY=rockchip_rk3399_recovery
    
19. # Pcba config
    
20. export RK_CFG_PCBA=rockchip_rk3399_pcba
    
21. # Build jobs
    
22. export RK_JOBS=12
    
23. # target chip
    
24. export RK_TARGET_PRODUCT=rk3399
    
25. # Set rootfs type, including ext2 ext4 squashfs
    
26. export RK_ROOTFS_TYPE=ext4
    
27. # rootfs image path
    
28. export RK_ROOTFS_IMG=buildroot/output/$RK_CFG_BUILDROOT/images/rootfs.$RK_ROOTFS_TYPE
    
29. # Set oem partition type, including ext2 squashfs
    
30. export RK_OEM_FS_TYPE=ext2
    
31. # Set userdata partition type, including ext2, fat
    
32. export RK_USERDATA_FS_TYPE=ext2
    
33. # Set flash type. support <emmc, nand, spi_nand, spi_nor>
    
34. export RK_STORAGE_TYPE=emmc
    
35. #OEM config: /oem/dueros/aispeech/iflytekSDK/CaeDemo_VAD/smart_voice
    
36. export RK_OEM_DIR=oem_normal
    
37. #userdata config
    
38. export RK_USERDATA_DIR=userdata_normal
    

复制代码

Negro旋

你需要按照官方wiki进行操作，先更新代码，然后按照 “编译前配置” 的内容进行操作，应该就可以了。

xfan

Negro旋 发表于 2019-12-3 10:25
你需要按照官方wiki进行操作，先更新代码，然后按照 “编译前配置” 的内容进行操作，应该就可以了。

好的，多谢回复。有问题再来请教。