|
Andoid系统的selinux安全级别从permissive改为enforcing,系统无法启动
发表于 2020-2-10 15:27:42
浏览:13177
|
回复:6
打印
只看该作者
[复制链接]
楼主
[16:28:53.652]
[16:28:53.792]
[16:29:01.147] DDR Version 1.23 20190709
[16:29:01.147] In
[16:29:01.147] channel 0
[16:29:01.196] CS = 0
[16:29:01.196] MR0=0x98
[16:29:01.196] MR4=0x3
[16:29:01.196] MR5=0xFF
[16:29:01.196] MR8=0x8
[16:29:01.196] MR12=0x72
[16:29:01.196] MR14=0x72
[16:29:01.196] MR18=0x0
[16:29:01.196] MR19=0x0
[16:29:01.196] MR24=0x8
[16:29:01.196] MR25=0xFF
[16:29:01.196] channel 1
[16:29:01.196] CS = 0
[16:29:01.196] MR0=0x98
[16:29:01.196] MR4=0x3
[16:29:01.196] MR5=0xFF
[16:29:01.196] MR8=0x8
[16:29:01.196] MR12=0x72
[16:29:01.196] MR14=0x72
[16:29:01.196] MR18=0x0
[16:29:01.196] MR19=0x0
[16:29:01.196] MR24=0x8
[16:29:01.196] MR25=0xFF
[16:29:01.196] channel 0 training pass!
[16:29:01.196] channel 1 training pass!
[16:29:01.196] change freq to 416MHz 0,1
[16:29:01.196] Channel 0: LPDDR4,416MHz
[16:29:01.196] Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
[16:29:01.196] Channel 1: LPDDR4,416MHz
[16:29:01.196] Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
[16:29:01.196] 256B stride
[16:29:01.196] channel 0
[16:29:01.196] CS = 0
[16:29:01.196] MR0=0x98
[16:29:01.196] MR4=0x3
[16:29:01.196] MR5=0xFF
[16:29:01.196] MR8=0x8
[16:29:01.196] MR12=0x72
[16:29:01.196] MR14=0x72
[16:29:01.196] MR18=0x0
[16:29:01.196] MR19=0x0
[16:29:01.196] MR24=0x8
[16:29:01.196] MR25=0xFF
[16:29:01.196] channel 1
[16:29:01.196] CS = 0
[16:29:01.196] MR0=0x98
[16:29:01.196] MR4=0x81
[16:29:01.196] MR5=0xFF
[16:29:01.196] MR8=0x8
[16:29:01.196] MR12=0x72
[16:29:01.196] MR14=0x72
[16:29:01.196] MR18=0x0
[16:29:01.196] MR19=0x0
[16:29:01.196] MR24=0x8
[16:29:01.196] MR25=0xFF
[16:29:01.196] channel 0 training pass!
[16:29:01.196] channel 1 training pass!
[16:29:01.196] channel 0, cs 0, advanced training done
[16:29:01.486]
[16:29:01.785] channel 1, cs 0, advanced training done
[16:29:01.785] change freq to 856MHz 1,0
[16:29:01.785] ch 0 ddrconfig = 0x101, ddrsize = 0x20
[16:29:01.785] ch 1 ddrconfig = 0x101, ddrsize = 0x20
[16:29:01.785] pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
[16:29:01.785] OUT
[16:29:01.785] Boot1: 2018-08-06, version: 1.15
[16:29:01.823] CPUId = 0x0
[16:29:01.823] ChipType = 0x10, 224
[16:29:01.823] SdmmcInit=2 0
[16:29:01.876] BootCapSize=100000
[16:29:01.876] UserCapSize=14910MB
[16:29:01.876] FwPartOffset=2000 , 100000
[16:29:01.876] mmc0:cmd8,20
[16:29:01.885] mmc0:cmd5,20
[16:29:01.885] mmc0:cmd55,20
[16:29:01.885] mmc0:cmd1,20
[16:29:01.885] mmc0:cmd8,20
[16:29:01.885] mmc0:cmd5,20
[16:29:01.885] mmc0:cmd55,20
[16:29:01.885] mmc0:cmd1,20
[16:29:01.885] mmc0:cmd8,20
[16:29:01.894] mmc0:cmd5,20
[16:29:01.894] mmc0:cmd55,20
[16:29:01.894] mmc0:cmd1,20
[16:29:01.894] SdmmcInit=0 1
[16:29:01.894] StorageInit ok = 67788
[16:29:01.894] SecureMode = 0
[16:29:01.894] SecureInit read PBA: 0x4
[16:29:01.894] SecureInit read PBA: 0x404
[16:29:01.894] SecureInit read PBA: 0x804
[16:29:01.894] SecureInit read PBA: 0xc04
[16:29:01.894] SecureInit read PBA: 0x1004
[16:29:01.894] SecureInit read PBA: 0x1404
[16:29:01.894] SecureInit read PBA: 0x1804
[16:29:01.894] SecureInit read PBA: 0x1c04
[16:29:01.894] SecureInit ret = 0, SecureMode = 0
[16:29:01.894] GPT 0x3190d20 signature is wrong
[16:29:01.894] LoadTrust Addr:0x4000
[16:29:01.894] No find bl30.bin
[16:29:01.894] Load uboot, ReadLba = 2000
[16:29:01.912] Load OK, addr=0x200000, size=0x84304
[16:29:01.912] RunBL31 0x10000
[16:29:01.926] NOTICE: BL31: v1.3(debug):22b599a
[16:29:01.926] NOTICE: BL31: Built : 11:03:32, Jul 10 2019
[16:29:01.926] NOTICE: BL31: Rockchip release version: v1.1
[16:29:01.941] INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
[16:29:01.941] INFO: Using opteed sec cpu_context!
[16:29:01.941] INFO: boot cpu mask: 0
[16:29:01.941] INFO: plat_rockchip_pmu_init(1181): pd status 3e
[16:29:01.941] INFO: BL31: Initializing runtime services
[16:29:01.941] INFO: BL31: Initializing BL32
[16:29:01.941] INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64)
[16:29:01.965]
[16:29:01.965] INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
[16:29:01.965]
[16:29:01.965] INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
[16:29:01.968] INFO: BL31: Preparing for EL3 exit to normal world
[16:29:01.968] INFO: Entry point address = 0x200000
[16:29:01.968] INFO: SPSR = 0x3c9
[16:29:01.974]
[16:29:01.974]
[16:29:01.974] U-Boot 2014.10-RK3399-06 (Jan 20 2020 - 21:26:24)
[16:29:01.974]
[16:29:01.974] CPU: rk3399
[16:29:01.974] cpu version = 0
[16:29:01.974] CPU's clock information:
[16:29:01.974] aplll = 816000000HZ
[16:29:01.974] apllb = 24000000HZ
[16:29:01.974] gpll = 800000000HZ
[16:29:01.974] aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
[16:29:01.974] aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
[16:29:01.974] hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
[16:29:01.974] cpll = 800000000HZ
[16:29:01.974] dpll = 856000000HZ
[16:29:01.974] vpll = 24000000HZ
[16:29:01.974] npll = 24000000HZ
[16:29:01.974] ppll = 676000000HZ
[16:29:01.974] Board: Rockchip platform Board
[16:29:01.974] Uboot as second level loader
[16:29:01.974] DRAM: Found dram banks: 1
[16:29:01.974] Adding bank:0000000000200000(000000007fe00000)
[16:29:01.974] Reserve memory for trust os.
[16:29:01.974] dram reserve bank: base = 0x08400000, size = 0x01e00000
[16:29:01.974] 128 MiB
[16:29:01.974] SdmmcInit = 0 20
[16:29:02.055] storage init OK!
[16:29:02.116] Using default environment
[16:29:02.116]
[16:29:02.116] GetParam
[16:29:02.116] Load FDT from boot image.
[16:29:02.116] power key: bank-0 pin-5
[16:29:02.116] can't find dts node for fixed
[16:29:02.121] usb bc: can find node by path: /dwc-control-usb/usb_bc
[16:29:02.144] pmic:rk808
[16:29:02.144] can't find dts node for pwm1
[16:29:02.156] set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=60
[16:29:02.156] CPU's clock information:
[16:29:02.156] aplll = 816000000HZ
[16:29:02.156] apllb = 24000000HZ
[16:29:02.156] gpll = 800000000HZ
[16:29:02.156] aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
[16:29:02.156] aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
[16:29:02.156] hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
[16:29:02.156] cpll = 800000000HZ
[16:29:02.156] dpll = 856000000HZ
[16:29:02.156] vpll = 24000000HZ
[16:29:02.156] npll = 24000000HZ
[16:29:02.156] ppll = 676000000HZ
[16:29:02.156] Can't find dts node for fuel guage cw201x
[16:29:02.156] can't find dts node for ec-battery
[16:29:02.156] Can't find dts node for charger bq25700
[16:29:02.163] invalide header tag
[16:29:02.163] ca head not found
[16:29:02.163] SecureBootEn = 0, SecureBootLock = 0
[16:29:02.163]
[16:29:02.163] #Boot ver: 0000-00-00#0.00
[16:29:02.163] empty serial no.
[16:29:02.163] normal boot.
[16:29:02.163] checkKey
[16:29:02.163] vbus = 1
[16:29:02.163] rockusb key pressed.
[16:29:02.163]
[16:40:14.790] ERROR: [FW_HandleUnknownCmd]: FW_HandleUnknownCmd: unknown cmd 0xaa
[16:40:14.790]
[16:40:16.146] DDR Version 1.23 20190709
[16:40:16.146] In
[16:40:16.146] soft reset
[16:40:16.149] SRX
[16:40:16.149] channel 0
[16:40:16.166] CS = 0
[16:40:16.166] MR0=0x98
[16:40:16.166] MR4=0x1
[16:40:16.166] MR5=0xFF
[16:40:16.166] MR8=0x8
[16:40:16.166] MR12=0x72
[16:40:16.166] MR14=0x72
[16:40:16.166] MR18=0x0
[16:40:16.166] MR19=0x0
[16:40:16.166] MR24=0x8
[16:40:16.166] MR25=0xFF
[16:40:16.166] channel 1
[16:40:16.166] CS = 0
[16:40:16.166] MR0=0x98
[16:40:16.166] MR4=0x1
[16:40:16.166] MR5=0xFF
[16:40:16.166] MR8=0x8
[16:40:16.166] MR12=0x72
[16:40:16.166] MR14=0x72
[16:40:16.166] MR18=0x0
[16:40:16.166] MR19=0x0
[16:40:16.166] MR24=0x8
[16:40:16.166] MR25=0xFF
[16:40:16.166] channel 0 training pass!
[16:40:16.166] channel 1 training pass!
[16:40:16.166] change freq to 416MHz 0,1
[16:40:16.166] Channel 0: LPDDR4,416MHz
[16:40:16.166] Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
[16:40:16.166] Channel 1: LPDDR4,416MHz
[16:40:16.166] Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
[16:40:16.166] 256B stride
[16:40:16.166] channel 0
[16:40:16.166] CS = 0
[16:40:16.166] MR0=0x98
[16:40:16.166] MR4=0x1
[16:40:16.166] MR5=0xFF
[16:40:16.166] MR8=0x8
[16:40:16.166] MR12=0x72
[16:40:16.166] MR14=0x72
[16:40:16.166] MR18=0x0
[16:40:16.166] MR19=0x0
[16:40:16.171] MR24=0x8
[16:40:16.171] MR25=0xFF
[16:40:16.171] channel 1
[16:40:16.171] CS = 0
[16:40:16.171] MR0=0x98
[16:40:16.171] MR4=0x1
[16:40:16.171] MR5=0xFF
[16:40:16.171] MR8=0x8
[16:40:16.171] MR12=0x72
[16:40:16.171] MR14=0x72
[16:40:16.171] MR18=0x0
[16:40:16.171] MR19=0x0
[16:40:16.171] MR24=0x8
[16:40:16.171] MR25=0xFF
[16:40:16.171] channel 0 training pass!
[16:40:16.171] channel 1 training pass!
[16:40:16.171] channel 0, cs 0, advanced training done
[16:40:16.511]
[16:40:16.855] channel 1, cs 0, advanced training done
[16:40:16.855] change freq to 856MHz 1,0
[16:40:16.855] ch 0 ddrconfig = 0x101, ddrsize = 0x20
[16:40:16.855] ch 1 ddrconfig = 0x101, ddrsize = 0x20
[16:40:16.855] pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
[16:40:16.855] OUT
[16:40:16.855] Boot1: 2018-08-06, version: 1.15
[16:40:16.898] CPUId = 0x0
[16:40:16.898] ChipType = 0x10, 285
[16:40:16.898] SdmmcInit=2 0
[16:40:16.956] BootCapSize=100000
[16:40:16.956] UserCapSize=14910MB
[16:40:16.956] FwPartOffset=2000 , 100000
[16:40:16.956] mmc0:cmd8,20
[16:40:16.956] mmc0:cmd5,20
[16:40:16.956] mmc0:cmd55,20
[16:40:16.966] mmc0:cmd1,20
[16:40:16.966] mmc0:cmd8,20
[16:40:16.966] mmc0:cmd5,20
[16:40:16.966] mmc0:cmd55,20
[16:40:16.966] mmc0:cmd1,20
[16:40:16.966] mmc0:cmd8,20
[16:40:16.966] mmc0:cmd5,20
[16:40:16.966] mmc0:cmd55,20
[16:40:16.966] mmc0:cmd1,20
[16:40:16.966] SdmmcInit=0 1
[16:40:16.966] StorageInit ok = 68691
[16:40:16.966] GPT 0x3190e40 signature is wrong
[16:40:16.970] powerOn 82626
[16:40:16.980]
[16:41:01.633] DDR Version 1.23 20190709
[16:41:01.633] In
[16:41:01.633] soft reset
[16:41:01.633] SRX
[16:41:01.633] channel 0
[16:41:01.646] CS = 0
[16:41:01.646] MR0=0x98
[16:41:01.646] MR4=0x1
[16:41:01.646] MR5=0xFF
[16:41:01.646] MR8=0x8
[16:41:01.646] MR12=0x72
[16:41:01.646] MR14=0x72
[16:41:01.646] MR18=0x0
[16:41:01.646] MR19=0x0
[16:41:01.646] MR24=0x8
[16:41:01.646] MR25=0xFF
[16:41:01.646] channel 1
[16:41:01.656] CS = 0
[16:41:01.656] MR0=0x98
[16:41:01.656] MR4=0x3
[16:41:01.656] MR5=0xFF
[16:41:01.656] MR8=0x8
[16:41:01.656] MR12=0x72
[16:41:01.656] MR14=0x72
[16:41:01.656] MR18=0x0
[16:41:01.656] MR19=0x0
[16:41:01.656] MR24=0x8
[16:41:01.656] MR25=0xFF
[16:41:01.656] channel 0 training pass!
[16:41:01.656] channel 1 training pass!
[16:41:01.656] change freq to 416MHz 0,1
[16:41:01.656] Channel 0: LPDDR4,416MHz
[16:41:01.656] Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
[16:41:01.656] Channel 1: LPDDR4,416MHz
[16:41:01.656] Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
[16:41:01.656] 256B stride
[16:41:01.656] channel 0
[16:41:01.656] CS = 0
[16:41:01.656] MR0=0x98
[16:41:01.656] MR4=0x1
[16:41:01.656] MR5=0xFF
[16:41:01.656] MR8=0x8
[16:41:01.656] MR12=0x72
[16:41:01.656] MR14=0x72
[16:41:01.656] MR18=0x0
[16:41:01.656] MR19=0x0
[16:41:01.656] MR24=0x8
[16:41:01.656] MR25=0xFF
[16:41:01.656] channel 1
[16:41:01.656] CS = 0
[16:41:01.656] MR0=0x98
[16:41:01.656] MR4=0x3
[16:41:01.656] MR5=0xFF
[16:41:01.656] MR8=0x8
[16:41:01.656] MR12=0x72
[16:41:01.656] MR14=0x72
[16:41:01.656] MR18=0x0
[16:41:01.656] MR19=0x0
[16:41:01.656] MR24=0x8
[16:41:01.656] MR25=0xFF
[16:41:01.656] channel 0 training pass!
[16:41:01.656] channel 1 training pass!
[16:41:01.656] channel 0, cs 0, advanced training done
[16:41:01.999]
[16:41:02.346] channel 1, cs 0, advanced training done
[16:41:02.346] change freq to 856MHz 1,0
[16:41:02.346] ch 0 ddrconfig = 0x101, ddrsize = 0x20
[16:41:02.346] ch 1 ddrconfig = 0x101, ddrsize = 0x20
[16:41:02.346] pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
[16:41:02.346] OUT
[16:41:02.346] Boot1: 2018-08-06, version: 1.15
[16:41:02.389] CPUId = 0x0
[16:41:02.389] ChipType = 0x10, 286
[16:41:02.389] SdmmcInit=2 0
[16:41:02.444] BootCapSize=100000
[16:41:02.444] UserCapSize=14910MB
[16:41:02.444] FwPartOffset=2000 , 100000
[16:41:02.444] mmc0:cmd8,20
[16:41:02.456] mmc0:cmd5,20
[16:41:02.456] mmc0:cmd55,20
[16:41:02.456] mmc0:cmd1,20
[16:41:02.456] mmc0:cmd8,20
[16:41:02.456] mmc0:cmd5,20
[16:41:02.456] mmc0:cmd55,20
[16:41:02.456] mmc0:cmd1,20
[16:41:02.456] mmc0:cmd8,20
[16:41:02.456] mmc0:cmd5,20
[16:41:02.456] mmc0:cmd55,20
[16:41:02.456] mmc0:cmd1,20
[16:41:02.456] SdmmcInit=0 1
[16:41:02.456] StorageInit ok = 68753
[16:41:02.456] SecureMode = 0
[16:41:02.456] SecureInit read PBA: 0x4
[16:41:02.462] SecureInit read PBA: 0x404
[16:41:02.462] SecureInit read PBA: 0x804
[16:41:02.462] SecureInit read PBA: 0xc04
[16:41:02.462] SecureInit read PBA: 0x1004
[16:41:02.462] SecureInit read PBA: 0x1404
[16:41:02.462] SecureInit read PBA: 0x1804
[16:41:02.462] SecureInit read PBA: 0x1c04
[16:41:02.462] SecureInit ret = 0, SecureMode = 0
[16:41:02.462] GPT 0x3190d20 signature is wrong
[16:41:02.462] LoadTrust Addr:0x4000
[16:41:02.462] No find bl30.bin
[16:41:02.462] Load uboot, ReadLba = 2000
[16:41:02.476] Load OK, addr=0x200000, size=0x84304
[16:41:02.486] RunBL31 0x10000
[16:41:02.486] NOTICE: BL31: v1.3(debug):22b599a
[16:41:02.498] NOTICE: BL31: Built : 11:03:32, Jul 10 2019
[16:41:02.498] NOTICE: BL31: Rockchip release version: v1.1
[16:41:02.516] INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
[16:41:02.516] INFO: Using opteed sec cpu_context!
[16:41:02.516] INFO: boot cpu mask: 0
[16:41:02.516] INFO: plat_rockchip_pmu_init(1181): pd status 3e
[16:41:02.516] INFO: BL31: Initializing runtime services
[16:41:02.516] INFO: BL31: Initializing BL32
[16:41:02.518] INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64)
[16:41:02.536]
[16:41:02.536] INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
[16:41:02.536]
[16:41:02.536] INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
[16:41:02.566] INFO: BL31: Preparing for EL3 exit to normal world
[16:41:02.566] INFO: Entry point address = 0x200000
[16:41:02.566] INFO: SPSR = 0x3c9
[16:41:02.566]
[16:41:02.566]
[16:41:02.566] U-Boot 2014.10-RK3399-06 (Feb 07 2020 - 16:21:01)
[16:41:02.566]
[16:41:02.566] CPU: rk3399
[16:41:02.566] cpu version = 0
[16:41:02.566] CPU's clock information:
[16:41:02.566] aplll = 816000000HZ
[16:41:02.566] apllb = 24000000HZ
[16:41:02.566] gpll = 800000000HZ
[16:41:02.566] aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
[16:41:02.566] aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
[16:41:02.566] hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
[16:41:02.566] cpll = 800000000HZ
[16:41:02.566] dpll = 856000000HZ
[16:41:02.566] vpll = 24000000HZ
[16:41:02.566] npll = 24000000HZ
[16:41:02.566] ppll = 676000000HZ
[16:41:02.566] Board: Rockchip platform Board
[16:41:02.566] Uboot as second level loader
[16:41:02.566] DRAM: Found dram banks: 1
[16:41:02.566] Adding bank:0000000000200000(000000007fe00000)
[16:41:02.566] Reserve memory for trust os.
[16:41:02.566] dram reserve bank: base = 0x08400000, size = 0x01e00000
[16:41:02.569] 128 MiB
[16:41:02.569] SdmmcInit = 0 20
[16:41:02.651] storage init OK!
[16:41:02.706] Using default environment
[16:41:02.706]
[16:41:02.706] GetParam
[16:41:02.706] Load FDT from boot image.
[16:41:02.706] power key: bank-0 pin-5
[16:41:02.716] can't find dts node for fixed
[16:41:02.716] usb bc: can find node by path: /dwc-control-usb/usb_bc
[16:41:02.753] pmic:rk808
[16:41:02.756] can't find dts node for pwm1
[16:41:02.756] set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=60
[16:41:02.756] CPU's clock information:
[16:41:02.756] aplll = 816000000HZ
[16:41:02.756] apllb = 24000000HZ
[16:41:02.756] gpll = 800000000HZ
[16:41:02.756] aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
[16:41:02.756] aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
[16:41:02.756] hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
[16:41:02.756] cpll = 800000000HZ
[16:41:02.756] dpll = 856000000HZ
[16:41:02.756] vpll = 24000000HZ
[16:41:02.756] npll = 24000000HZ
[16:41:02.756] ppll = 676000000HZ
[16:41:02.756] Can't find dts node for fuel guage cw201x
[16:41:02.756] can't find dts node for ec-battery
[16:41:02.756] Can't find dts node for charger bq25700
[16:41:02.756] invalide header tag
[16:41:02.756] ca head not found
[16:41:02.756] SecureBootEn = 0, SecureBootLock = 0
[16:41:02.756]
[16:41:02.756] #Boot ver: 2020-02-07#1.15
[16:41:02.756] empty serial no.
[16:41:02.756] reboot normal.
[16:41:02.756] checkKey
[16:41:02.763] vbus = 1
[16:41:02.763] no fuel gauge found
[16:41:02.763] no fuel gauge found
[16:41:02.763] Rockchip UBOOT DRM driver version: develop-v1.0.0
[16:41:02.763] failed to find panel driver
[16:41:02.773] read logo on state from dts [1]
[16:41:02.773] no fuel gauge found
[16:41:02.773]
[16:41:03.043] Monitor has basic audio support
[16:41:03.043] drm_rk_selete_output; fail get baseparameter
[16:41:03.043] rk lcdc - 0 dclk set: dclk = 148500000HZ, pll select = 0, div = 1
[16:41:03.043] rockchip_panel_prepare: failed to find panel prepare funcs
[16:41:03.043] CEA mode used vic=16
[16:41:03.043] dw_hdmi_setup HDMI mode
[16:41:03.065] rockchip_panel_enable: failed to find panel prepare funcs
[16:41:03.065] ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
[16:41:03.065] failed to display kernel logo
[16:41:03.065] got recovery cmd from misc.
[16:41:03.065]
[16:41:03.756] hwversion: disabled!
[16:41:03.756] Secure Boot state: 0
[16:41:03.756] kernel @ 0x00280000 (0x01309808)
[16:41:03.756] ramdisk @ 0x04bf0000 (0x0074e5f4)
[16:41:03.756] bootrk: do_bootm_linux...
[16:41:03.756] Loading Device Tree to 0000000004600000, end 0000000004616a1e ... OK
[16:41:03.759] Add bank:0000000000200000, 0000000008200000
[16:41:03.759] Add bank:000000000a200000, 0000000075e00000
[16:41:03.759] WARNING: could not set reg FDT_ERR_BADOFFSET.
[16:41:03.783]
[16:41:03.783] Starting kernel ...
[16:41:03.783]
[16:41:03.783] [ 0.000000] Booting Linux on physical CPU 0x0
[16:41:03.795] [ 0.000000] Initializing cgroup subsys cpuset
[16:41:03.795] [ 0.000000] Initializing cgroup subsys cpu
[16:41:03.795] [ 0.000000] Initializing cgroup subsys cpuacct
[16:41:03.795] [ 0.000000] Initializing cgroup subsys schedtune
[16:41:03.795] [ 0.000000] Linux version 4.4.126 (yangjie@vizumsrv) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #6 SMP PREEMPT Tue Dec 31 15:01:06 CST 2019
[16:41:03.795] [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[16:41:03.795] [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[16:41:03.795] [ 0.000000] bootconsole [uart0] enabled
[16:41:03.795] [ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[16:41:03.800] [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[16:41:03.800] [ 0.000000] psci: probing for conduit method from DT.
[16:41:03.896] [ 0.000000] psci: PSCIv1.0 detected in firmware.
[16:41:03.896] [ 0.000000] psci: Using standard PSCI v0.2 function IDs
[16:41:03.896] [ 0.000000] psci: Trusted OS migration not required
[16:41:03.896] [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eefa000 s45528 r8192 d32296 u86016
[16:41:03.896] [ 0.000000] Detected VIPT I-cache on CPU0
[16:41:03.896] [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[16:41:03.896] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 507912
[16:41:03.896] [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=enforcing androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00020000@0x0002C000(recovery),0x00038000@0x0004C000(backup),0x00040000@0x00084000(cache),0x00300000@0x000C4000(system),0x00100000@0x003C4000(oem),0x00008000@0x004C4000(metadata),0x00000040@0x004CC000(verity_mode),0x00002000@0x004CC040(reserved),0x00000400@0x004CE040(frp),-@0x004CE440(userdata) storagemedia=emmc androidboot.oem_unlocked=0 uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2020-02-07_16:21:01 SecureBootCheckOk=0
[16:41:03.906] [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[16:41:03.906] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[16:41:03.914] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[16:41:03.914] [ 0.000000] software IO TLB [mem 0x7eeb2000-0x7eef2000] (0MB) mapped at [ffffffc07eeb2000-ffffffc07eef1fff]
[16:41:03.914] [ 0.000000] Memory: 1981820K/2064384K available (11262K kernel code, 1702K rwdata, 5632K rodata, 832K init, 1134K bss, 66180K reserved, 16384K cma-reserved)
[16:41:03.986] [ 0.000000] Virtual kernel memory layout:
[16:41:03.986] [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[16:41:03.986] [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[16:41:03.986] [ 0.000000] .init : 0xffffff8009110000 - 0xffffff80091e0000 ( 832 KB)
[16:41:03.986] [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008b80000 ( 11264 KB)
[16:41:03.986] [ 0.000000] .rodata : 0xffffff8008b80000 - 0xffffff8009110000 ( 5696 KB)
[16:41:03.986] [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff8009389808 ( 1703 KB)
[16:41:03.996] [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[16:41:03.996] [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
[16:41:03.996] [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[16:41:03.996] [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[16:41:03.996] [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
[16:41:03.996] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[16:41:03.996] [ 0.000000] Preemptible hierarchical RCU implementation.
[16:41:03.996] [ 0.000000] Build-time adjustment of leaf fanout to 64.
[16:41:03.996] [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[16:41:03.996] [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[16:41:03.996] [ 0.000000] NR_IRQS:64 nr_irqs:64 0
[16:41:04.006] [ 0.000000] GIC: Using split EOI/Deactivate mode
[16:41:04.006] [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[16:41:04.006] [ 0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
[16:41:04.006] [ 0.000000] ITS: using cache flushing for cmd queue
[16:41:04.006] [ 0.000000] GIC: using LPI property table @0x000000000a280000
[16:41:04.006] [ 0.000000] ITS: Allocated 1792 chunks for LPIs
[16:41:04.006] [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[16:41:04.006] [ 0.000000] CPU0: using LPI pending table @0x000000000a290000
[16:41:04.006] [ 0.000000] GIC: using cache flushing for LPI property table
[16:41:04.006] [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[16:41:04.006] [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[16:41:04.008] [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[16:41:04.025] [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[16:41:04.025] [ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[16:41:04.035] [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[16:41:04.086] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[16:41:04.086] [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[16:41:04.086] [ 0.001942] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[16:41:04.086] [ 0.002928] pid_max: default: 32768 minimum: 301
[16:41:04.086] [ 0.003432] Security Framework initialized
[16:41:04.086] [ 0.003831] SELinux: Initializing.
[16:41:04.086] [ 0.004276] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[16:41:04.086] [ 0.004920] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[16:41:04.086] [ 0.006388] Initializing cgroup subsys memory
[16:41:04.086] [ 0.006829] Initializing cgroup subsys freezer
[16:41:04.091] [ 0.008166] sched-energy: Sched-energy-costs installed from DT
[16:41:04.091] [ 0.008729] CPU0: update cpu_capacity 401
[16:41:04.091] [ 0.009196] ASID allocator initialised with 32768 entries
[16:41:04.091] [ 0.026030] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[16:41:04.109] [ 0.027337] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[16:41:04.109] [ 0.039429] Detected VIPT I-cache on CPU1
[16:41:04.166] [ 0.039461] CPU1: found redistributor 1 region 0:0x00000000fef20000
[16:41:04.166] [ 0.039496] CPU1: using LPI pending table @0x000000000a3f0000
[16:41:04.166] [ 0.039539] CPU1: update cpu_capacity 401
[16:41:04.166] [ 0.039543] CPU1: Booted secondary processor [410fd034]
[16:41:04.166] [ 0.049407] Detected VIPT I-cache on CPU2
[16:41:04.166] [ 0.049426] CPU2: found redistributor 2 region 0:0x00000000fef40000
[16:41:04.166] [ 0.049459] CPU2: using LPI pending table @0x000000007c020000
[16:41:04.166] [ 0.049486] CPU2: update cpu_capacity 401
[16:41:04.166] [ 0.049490] CPU2: Booted secondary processor [410fd034]
[16:41:04.166] [ 0.059439] Detected VIPT I-cache on CPU3
[16:41:04.166] [ 0.059457] CPU3: found redistributor 3 region 0:0x00000000fef60000
[16:41:04.166] [ 0.059490] CPU3: using LPI pending table @0x000000007c060000
[16:41:04.166] [ 0.059515] CPU3: update cpu_capacity 401
[16:41:04.166] [ 0.059518] CPU3: Booted secondary processor [410fd034]
[16:41:04.175] [ 0.069487] Detected PIPT I-cache on CPU4
[16:41:04.175] [ 0.069514] CPU4: found redistributor 100 region 0:0x00000000fef80000
[16:41:04.175] [ 0.069552] CPU4: using LPI pending table @0x000000007c0b0000
[16:41:04.175] [ 0.069591] CPU4: update cpu_capacity 1024
[16:41:04.175] [ 0.069594] CPU4: Booted secondary processor [410fd082]
[16:41:04.175] [ 0.079509] Detected PIPT I-cache on CPU5
[16:41:04.175] [ 0.079527] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[16:41:04.175] [ 0.079562] CPU5: using LPI pending table @0x000000007c0e0000
[16:41:04.175] [ 0.079588] CPU5: update cpu_capacity 1024
[16:41:04.175] [ 0.079591] CPU5: Booted secondary processor [410fd082]
[16:41:04.175] [ 0.079676] Brought up 6 CPUs
[16:41:04.175] [ 0.092074] SMP: Total of 6 processors activated.
[16:41:04.175] [ 0.092528] CPU features: detected feature: GIC system register CPU interface
[16:41:04.175] [ 0.093216] CPU: All CPU(s) started at EL2
[16:41:04.175] [ 0.093649] alternatives: patching kernel code
[16:41:04.175] [ 0.096027] devtmpfs: initialized
[16:41:04.178] [ 0.116698] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[16:41:04.206] [ 0.117618] futex hash table entries: 2048 (order: 5, 131072 bytes)
[16:41:04.206] [ 0.118925] pinctrl core: initialized pinctrl subsystem
[16:41:04.206] [ 0.121403] Failed to find legacy iommu devices
[16:41:04.206] [ 0.122192] NET: Registered protocol family 16
[16:41:04.206] [ 0.123042] schedtune: init normalization constants...
[16:41:04.206] [ 0.123525] schedtune: CLUSTER[0-3] min_pwr: 56 max_pwr: 222
[16:41:04.206] [ 0.124132] schedtune: CPU[0] min_pwr: 0 max_pwr: 222
[16:41:04.206] [ 0.124735] schedtune: CPU[1] min_pwr: 0 max_pwr: 222
[16:41:04.206] [ 0.125344] schedtune: CPU[2] min_pwr: 0 max_pwr: 222
[16:41:04.206] [ 0.125951] schedtune: CPU[3] min_pwr: 0 max_pwr: 222
[16:41:04.206] [ 0.126566] schedtune: CLUSTER[4-5] min_pwr: 65 max_pwr: 1108
[16:41:04.214] [ 0.127174] schedtune: CPU[4] min_pwr: 0 max_pwr: 1108
[16:41:04.214] [ 0.127783] schedtune: CPU[5] min_pwr: 0 max_pwr: 1108
[16:41:04.214] [ 0.128387] schedtune: SYSTEM min_pwr: 121 max_pwr: 4434
[16:41:04.214] [ 0.128992] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
[16:41:04.214] [ 0.129697] schedtune: verify normalization constants...
[16:41:04.214] [ 0.130198] schedtune: max_pwr/2^0: 4313 => norm_pwr: 1024
[16:41:04.214] [ 0.130716] schedtune: max_pwr/2^1: 2156 => norm_pwr: 511
[16:41:04.214] [ 0.131233] schedtune: max_pwr/2^2: 1078 => norm_pwr: 255
[16:41:04.214] [ 0.131752] schedtune: max_pwr/2^3: 539 => norm_pwr: 127
[16:41:04.214] [ 0.132268] schedtune: max_pwr/2^4: 269 => norm_pwr: 63
[16:41:04.214] [ 0.132785] schedtune: max_pwr/2^5: 134 => norm_pwr: 31
[16:41:04.214] [ 0.133301] schedtune: configured to support 5 boost groups
[16:41:04.214] [ 0.143856] cpuidle: using governor ladder
[16:41:04.225] [ 0.153858] cpuidle: using governor menu
[16:41:04.235] [ 0.154233] Registered FIQ tty driver
[16:41:04.235] [ 0.154964] vdso: 2 pages (1 code @ ffffff8008b86000, 1 data @ ffffff80091e4000)
[16:41:04.235] [ 0.155672] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[16:41:04.239] [ 0.157367] DMA: preallocated 1024 KiB pool for atomic allocations
[16:41:04.239]
[16:41:04.266] [ 0.178137] console [pstore-1] enabled
[16:41:04.266] [ 0.178727] pstore: Registered ramoops as persistent store backend
[16:41:04.266] [ 0.179309] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[16:41:04.266] [ 0.182236] fiq debugger fiq mode enabled
[16:41:04.266] [ [ 0.182870] console [ttyFIQ0] enabled
[16:41:04.266] 0.182870] console [ttyFIQ0] enabled
[16:41:04.266] [ 0.183550] bootconsole [uart0] disabled
[16:41:04.266] [ 0.183550] bootconsole [uart0] disabled
[16:41:04.266] [ 0.184123] Registered fiq debugger ttyFIQ0
[16:41:04.268] [ 0.218265] iommu: Adding device ff650000.vpu_service to group 0
[16:41:04.305] [ 0.218340] iommu: Adding device ff660000.rkvdec to group 1
[16:41:04.305] [ 0.218409] iommu: Adding device ff670000.iep to group 2
[16:41:04.305] [ 0.218498] iommu: Adding device ff8f0000.vop to group 3
[16:41:04.305] [ 0.218568] iommu: Adding device ff900000.vop to group 4
[16:41:04.316] [ 0.218676] iommu: Adding device ff910000.isp to group 5
[16:41:04.316] [ 0.218748] iommu: Adding device ff920000.isp to group 6
[16:41:04.316] [ 0.219415] rk_iommu ff670800.iommu: can't get aclk
[16:41:04.316] [ 0.219430] rk_iommu ff670800.iommu: can't get hclk
[16:41:04.316] [ 0.220311] SCSI subsystem initialized
[16:41:04.316] [ 0.220656] usbcore: registered new interface driver usbfs
[16:41:04.316] [ 0.220716] usbcore: registered new interface driver hub
[16:41:04.316] [ 0.220793] usbcore: registered new device driver usb
[16:41:04.316] [ 0.221170] media: Linux media interface: v0.10
[16:41:04.316] [ 0.221208] Linux video capture interface: v2.00
[16:41:04.316] [ 0.221372] pps_core: LinuxPPS API ver. 1 registered
[16:41:04.316] [ 0.221384] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[16:41:04.316] [ 0.221404] PTP clock support registered
[16:41:04.316] [ 0.222958] Advanced Linux Sound Architecture Driver Initialized.
[16:41:04.316] [ 0.223483] Bluetooth: Core ver 2.21
[16:41:04.316] [ 0.223513] NET: Registered protocol family 31
[16:41:04.316] [ 0.223521] Bluetooth: HCI device and connection manager initialized
[16:41:04.316] [ 0.223535] Bluetooth: HCI socket layer initialized
[16:41:04.316] [ 0.223546] Bluetooth: L2CAP socket layer initialized
[16:41:04.316] [ 0.223578] Bluetooth: SCO socket layer initialized
[16:41:04.319] [ 0.224318] rockchip-cpuinfo cpuinfo: Serial : 4007a25c55642b9a
[16:41:04.319] [ 0.224854] clocksource: Switched to clocksource arch_sys_counter
[16:41:04.319] [ 0.268875] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[16:41:04.355] [ 0.269124] NET: Registered protocol family 2
[16:41:04.355] [ 0.269598] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[16:41:04.355] [ 0.269740] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[16:41:04.355] [ 0.270013] TCP: Hash tables configured (established 16384 bind 16384)
[16:41:04.355] [ 0.270093] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[16:41:04.355] [ 0.270154] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[16:41:04.355] [ 0.270325] NET: Registered protocol family 1
[16:41:04.355] [ 0.271204] Trying to unpack rootfs image as initramfs...
[16:41:04.355] [ 0.597839] Freeing initrd memory: 7480K
[16:41:04.686] [ 0.598467] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[16:41:04.686] [ 0.598557] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[16:41:04.686] [ 0.601356] audit: initializing netlink subsys (disabled)
[16:41:04.686] [ 0.601430] audit: type=2000 audit(0.596:1): initialized
[16:41:04.686] [ 0.606702] VFS: Disk quotas dquot_6.6.0
[16:41:04.686] [ 0.606835] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[16:41:04.696] [ 0.607841] Registering sdcardfs 0.1
[16:41:04.696] [ 0.608425] fuse init (API version 7.23)
[16:41:04.696] [ 0.609521]
[16:41:04.696] [ 0.609521] TEE Core Framework initialization (ver 1:0.1)
[16:41:04.696] [ 0.609549] TEE armv7 Driver initialization
[16:41:04.696] [ 0.609926] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[16:41:04.696] [ 0.609942] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[16:41:04.696] [ 0.610114] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[16:41:04.696] [ 0.614029] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[16:41:04.696] [ 0.614052] io scheduler noop registered
[16:41:04.696] [ 0.614213] io scheduler cfq registered (default)
[16:41:04.696] [ 0.615456] phy phy-ff770000.syscon:usb2-phy@e450.0: Failed to get VBUS supply regulator
[16:41:04.696] [ 0.616356] phy phy-ff770000.syscon:usb2-phy@e460.2: Failed to get VBUS supply regulator
[16:41:04.696] [ 0.616382] rockchip_usb2phy_otg_port_init() Can not read property vbus-5v-gpio
[16:41:04.706] [ 0.619358] ace test_init function.
[16:41:04.706] [ 0.619507] ace test_init end.ret=0
[16:41:04.706] [ 0.619785] radar end.ret=0
[16:41:04.706] [ 0.621389] iep: failed to find iep power down clock source.
[16:41:04.706] [ 0.621836] IEP Power ON
[16:41:04.706] [ 0.622007] IEP Power OFF
[16:41:04.706] [ 0.622081] IEP Driver loaded succesfully
[16:41:04.706] [ 0.622200] Module initialized.
[16:41:04.706] [ 0.622459] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[16:41:04.706] [ 0.622668] rk-vcodec ff650000.vpu_service: probe device
[16:41:04.706] [ 0.622835] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[16:41:04.706] [ 0.623352] rk-vcodec ff650000.vpu_service: could not find power_model node
[16:41:04.706] [ 0.623368] rk-vcodec ff650000.vpu_service: init success
[16:41:04.706] [ 0.623555] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[16:41:04.706] [ 0.623943] rk-vcodec ff660000.rkvdec: probe device
[16:41:04.706] [ 0.624104] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[16:41:04.716] [ 0.624491] rk-vcodec ff660000.rkvdec: could not find power_model node
[16:41:04.716] [ 0.624505] rk-vcodec ff660000.rkvdec: init success
[16:41:04.716] [ 0.626134] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[16:41:04.716] [ 0.626151] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[16:41:04.716] [ 0.627519] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[16:41:04.716] [ 0.627537] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[16:41:04.716] [ 0.629347] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[16:41:04.716] [ 0.629905] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[16:41:04.716] [ 0.630359] [drm] Initialized drm 1.1.0 20060810
[16:41:04.716] [ 0.633668] [drm] Rockchip DRM driver version: v1.0.0
[16:41:04.716] [ 0.633989] rockchip-drm display-subsystem: dmc is disabled
[16:41:04.716] [ 0.634279] rockchip-vop ff900000.vop: missing rockchip,grf property
[16:41:04.716] [ 0.634537] rockchip-vop ff900000.vop: unable to request PWM
[16:41:04.716] [ 0.634567] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[16:41:04.716] [ 0.634607] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[16:41:04.716] [ 0.634787] rockchip-vop ff8f0000.vop: unable to request PWM
[16:41:04.722] [ 0.634803] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[16:41:04.722] [ 0.635072] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[16:41:04.722] [ 0.635092] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[16:41:04.722] [ 0.635195] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[16:41:04.722] [ 0.635913] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[16:41:04.722] [ 0.635929] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[16:41:04.722] [ 0.635937] [drm] No driver support for vblank timestamp query.
[16:41:04.722]
[16:41:05.429] [ 1.346572] rockchip-drm display-subsystem: fb0: frame buffer device
[16:41:05.429] [ 1.361999] mali ff9a0000.gpu: Failed to get regulator
[16:41:05.446] [ 1.362040] mali ff9a0000.gpu: Power control initialization failed
[16:41:05.446] [ 1.362366] Unable to detect cache hierarchy for CPU 0
[16:41:05.446] [ 1.371136] brd: module loaded
[16:41:05.457] [ 1.376038] loop: module loaded
[16:41:05.457] [ 1.376596] zram: Added device: zram0
[16:41:05.462] [ 1.377518] SCSI Media Changer driver v0.25
[16:41:05.462] [ 1.378423] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[16:41:05.462] [ 1.378443] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[16:41:05.462] [ 1.378453] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[16:41:05.462] [ 1.379245] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max
[16:41:05.462] [ 1.549560] wk2xxx_serial_init()
[16:41:05.637] [ 1.549572] wk2xxx_request_port
[16:41:05.637] [ 1.549585] ttysWK0 at I/O 0x1 (irq = 222, base_baud = 460800) is a wk2xxx
[16:41:05.637] [ 1.549792] uart_add_one_port success for line i:= 0 with right 0
[16:41:05.637] [ 1.549804] wk2xxx_request_port
[16:41:05.637] [ 1.549815] ttysWK1 at I/O 0x2 (irq = 222, base_baud = 460800) is a wk2xxx
[16:41:05.637] [ 1.549994] uart_add_one_port success for line i:= 1 with right 0
[16:41:05.637] [ 1.550005] wk2xxx_request_port
[16:41:05.637] [ 1.550015] ttysWK2 at I/O 0x3 (irq = 222, base_baud = 460800) is a wk2xxx
[16:41:05.637] [ 1.550200] uart_add_one_port success for line i:= 2 with right 0
[16:41:05.637] [ 1.550211] wk2xxx_request_port
[16:41:05.637] [ 1.550221] ttysWK3 at I/O 0x4 (irq = 222, base_baud = 460800) is a wk2xxx
[16:41:05.637] [ 1.550398] uart_add_one_port success for line i:= 3 with right 0
[16:41:05.637] [ 1.550410] uart_add_one_port = 0x0
[16:41:05.637] [ 1.550434] register spi return v = :0
[16:41:05.637] [ 1.550480] register firefly_spi_init spi return v = :0
[16:41:05.637] [ 1.550542] tun: Universal TUN/TAP device driver, 1.6
[16:41:05.648] [ 1.550552] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[16:41:05.648] [ 1.551545] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[16:41:05.648] [ 1.551660] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[16:41:05.648] [ 1.551678] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2f).
[16:41:05.648] [ 1.551689] rk_gmac-dwmac fe300000.ethernet: RX delay(0x26).
[16:41:05.648] [ 1.551714] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[16:41:05.648] [ 1.551882] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[16:41:05.648] [ 1.551891] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[16:41:05.648] [ 1.556905] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[16:41:05.648] [ 1.557031] stmmac - user ID: 0x10, Synopsys ID: 0x35
[16:41:05.648] [ 1.557038] Ring mode enabled
[16:41:05.648] [ 1.557057] DMA HW capability register supported
[16:41:05.648] [ 1.557063] Normal descriptors
[16:41:05.648] [ 1.557073] RX Checksum Offload Engine supported (type 2)
[16:41:05.648] [ 1.557079] Wake-Up On Lan supported
[16:41:05.648] [ 1.557118] Enable RX Mitigation via HW Watchdog Timer
[16:41:05.648] [ 1.624438] libphy: stmmac: probed
[16:41:05.706] [ 1.624501] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[16:41:05.706] [ 1.624515] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[16:41:05.706] [ 1.626160] PPP generic driver version 2.4.2
[16:41:05.706] [ 1.626399] PPP BSD Compression module registered
[16:41:05.706] [ 1.626425] PPP Deflate Compression module registered
[16:41:05.706] [ 1.626473] PPP MPPE Compression module registered
[16:41:05.716] [ 1.626500] NET: Registered protocol family 24
[16:41:05.716] [ 1.626564] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[16:41:05.716] [ 1.626573] CSLIP: code copyright 1989 Regents of the University of California.
[16:41:05.716] [ 1.626592] Rockchip WiFi SYS interface (V1.00) ...
[16:41:05.716] [ 1.626729] usbcore: registered new interface driver catc
[16:41:05.716] [ 1.626794] usbcore: registered new interface driver kaweth
[16:41:05.716] [ 1.626813] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[16:41:05.716] [ 1.626866] usbcore: registered new interface driver pegasus
[16:41:05.716] [ 1.626930] usbcore: registered new interface driver rtl8150
[16:41:05.716] [ 1.626995] usbcore: registered new interface driver r8152
[16:41:05.716] [ 1.627013] hso: drivers/net/usb/hso.c: Option Wireless
[16:41:05.716] [ 1.627085] usbcore: registered new interface driver hso
[16:41:05.716] [ 1.627153] usbcore: registered new interface driver asix
[16:41:05.716] [ 1.627218] usbcore: registered new interface driver ax88179_178a
[16:41:05.716] [ 1.627280] usbcore: registered new interface driver cdc_ether
[16:41:05.716] [ 1.627339] usbcore: registered new interface driver cdc_eem
[16:41:05.716] [ 1.627403] usbcore: registered new interface driver dm9601
[16:41:05.716] [ 1.627468] usbcore: registered new interface driver smsc75xx
[16:41:05.716] [ 1.627532] usbcore: registered new interface driver smsc95xx
[16:41:05.716] [ 1.627593] usbcore: registered new interface driver gl620a
[16:41:05.725] [ 1.627653] usbcore: registered new interface driver net1080
[16:41:05.725] [ 1.627705] usbcore: registered new interface driver plusb
[16:41:05.725] [ 1.627780] usbcore: registered new interface driver rndis_host
[16:41:05.725] [ 1.627841] usbcore: registered new interface driver cdc_subset
[16:41:05.725] [ 1.627897] usbcore: registered new interface driver zaurus
[16:41:05.725] [ 1.627953] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[16:41:05.725] [ 1.628033] usbcore: registered new interface driver int51x1
[16:41:05.725] [ 1.628093] usbcore: registered new interface driver kalmia
[16:41:05.725] [ 1.628150] usbcore: registered new interface driver ipheth
[16:41:05.725] [ 1.628231] usbcore: registered new interface driver sierra_net
[16:41:05.725] [ 1.628298] usbcore: registered new interface driver cx82310_eth
[16:41:05.725] [ 1.628364] usbcore: registered new interface driver cdc_ncm
[16:41:05.725] [ 1.628419] usbcore: registered new interface driver qmi_wwan
[16:41:05.725] [ 1.628475] usbcore: registered new interface driver cdc_mbim
[16:41:05.725] [ 1.655120] phy phy-ff7c0000.phy.6: phy poweron failed --> -110
[16:41:05.746] [ 1.655257] dwc3 fe800000.dwc3: failed to initialize core
[16:41:05.746] [ 1.655340] dwc3: probe of fe800000.dwc3 failed with error -110
[16:41:05.746] [ 1.655507] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[16:41:05.746] [ 1.661657] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[16:41:05.746] [ 1.663504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[16:41:05.746] [ 1.663523] ehci-pci: EHCI PCI platform driver
[16:41:05.746] [ 1.663588] ehci-platform: EHCI generic platform driver
[16:41:05.746] [ 1.667248] ehci-platform fe380000.usb: EHCI Host Controller
[16:41:05.756] [ 1.667493] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[16:41:05.756] [ 1.667752] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[16:41:05.756] [ 1.674898] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[16:41:05.756] [ 1.675152] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[16:41:05.756] [ 1.675200] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[16:41:05.756] [ 1.675244] usb usb1: Product: EHCI Host Controller
[16:41:05.756] [ 1.675257] usb usb1: Manufacturer: Linux 4.4.126 ehci_hcd
[16:41:05.763] [ 1.675269] usb usb1: SerialNumber: fe380000.usb
[16:41:05.763] [ 1.675864] hub 1-0:1.0: USB hub found
[16:41:05.763] [ 1.675944] hub 1-0:1.0: 1 port detected
[16:41:05.763] [ 1.680077] ehci-platform fe3c0000.usb: EHCI Host Controller
[16:41:05.763] [ 1.680355] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[16:41:05.763] [ 1.680585] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[16:41:05.763] [ 1.688221] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[16:41:05.776] [ 1.688444] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[16:41:05.776] [ 1.688491] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[16:41:05.776] [ 1.688504] usb usb2: Product: EHCI Host Controller
[16:41:05.776] [ 1.688516] usb usb2: Manufacturer: Linux 4.4.126 ehci_hcd
[16:41:05.776] [ 1.688562] usb usb2: SerialNumber: fe3c0000.usb
[16:41:05.776] [ 1.689118] hub 2-0:1.0: USB hub found
[16:41:05.776] [ 1.689196] hub 2-0:1.0: 1 port detected
[16:41:05.776] [ 1.690023] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[16:41:05.776] [ 1.690060] ohci-platform: OHCI generic platform driver
[16:41:05.776] [ 1.690510] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[16:41:05.776] [ 1.690715] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[16:41:05.776] [ 1.690949] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[16:41:05.776] [ 1.745727] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[16:41:05.827] [ 1.745775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[16:41:05.827] [ 1.745790] usb usb3: Product: Generic Platform OHCI controller
[16:41:05.833] [ 1.745803] usb usb3: Manufacturer: Linux 4.4.126 ohci_hcd
[16:41:05.833] [ 1.745816] usb usb3: SerialNumber: fe3a0000.usb
[16:41:05.833] [ 1.746433] hub 3-0:1.0: USB hub found
[16:41:05.833] [ 1.746505] hub 3-0:1.0: 1 port detected
[16:41:05.833] [ 1.747178] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[16:41:05.833] [ 1.747410] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[16:41:05.833] [ 1.747617] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[16:41:05.833] [ 1.802387] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[16:41:05.888] [ 1.802436] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[16:41:05.888] [ 1.802452] usb usb4: Product: Generic Platform OHCI controller
[16:41:05.888] [ 1.802466] usb usb4: Manufacturer: Linux 4.4.126 ohci_hcd
[16:41:05.888] [ 1.802479] usb usb4: SerialNumber: fe3e0000.usb
[16:41:05.888] [ 1.803078] hub 4-0:1.0: USB hub found
[16:41:05.888] [ 1.803148] hub 4-0:1.0: 1 port detected
[16:41:05.888] [ 1.804546] usbcore: registered new interface driver cdc_acm
[16:41:05.888] [ 1.804596] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[16:41:05.897] [ 1.804681] usbcore: registered new interface driver usblp
[16:41:05.897] [ 1.804742] usbcore: registered new interface driver cdc_wdm
[16:41:05.897] [ 1.804809] usbcore: registered new interface driver uas
[16:41:05.897] [ 1.805027] usbcore: registered new interface driver usb-storage
[16:41:05.897] [ 1.805115] usbcore: registered new interface driver ums-alauda
[16:41:05.897] [ 1.805175] usbcore: registered new interface driver ums-cypress
[16:41:05.897] [ 1.805235] usbcore: registered new interface driver ums-datafab
[16:41:05.897] [ 1.805321] usbcore: registered new interface driver ums_eneub6250
[16:41:05.897] [ 1.805374] usbcore: registered new interface driver ums-freecom
[16:41:05.897] [ 1.805432] usbcore: registered new interface driver ums-isd200
[16:41:05.897] [ 1.805525] usbcore: registered new interface driver ums-jumpshot
[16:41:05.897] [ 1.805578] usbcore: registered new interface driver ums-karma
[16:41:05.897] [ 1.805632] usbcore: registered new interface driver ums-onetouch
[16:41:05.897] [ 1.805695] usbcore: registered new interface driver ums-sddr09
[16:41:05.897] [ 1.805786] usbcore: registered new interface driver ums-sddr55
[16:41:05.897] [ 1.805841] usbcore: registered new interface driver ums-usbat
[16:41:05.897] [ 1.805952] usbcore: registered new interface driver usbserial
[16:41:05.897] [ 1.806035] usbcore: registered new interface driver usbserial_generic
[16:41:05.897] [ 1.806075] usbserial: USB Serial support registered for generic
[16:41:05.897] [ 1.806135] usbcore: registered new interface driver option
[16:41:05.897] [ 1.806208] usbserial: USB Serial support registered for GSM modem (1-port)
[16:41:05.906] [ 1.806469] usbcore: registered new interface driver trancevibrator
[16:41:05.906] [ 1.806516] usb20_otg: version 3.10a 21-DEC-2012
[16:41:05.906] [ 1.806811] usb20_host: version 3.10a 21-DEC-2012
[16:41:05.906] [ 1.807643] usbcore: registered new interface driver xpad
[16:41:05.906] [ 1.807718] usbcore: registered new interface driver usb_acecad
[16:41:05.906] [ 1.807784] usbcore: registered new interface driver aiptek
[16:41:05.906] [ 1.807852] usbcore: registered new interface driver gtco
[16:41:05.906] [ 1.807913] usbcore: registered new interface driver hanwang
[16:41:05.906] [ 1.807980] usbcore: registered new interface driver kbtab
[16:41:05.906] [ 1.808727] .. rk pwm remotectl v1.1 init
[16:41:05.906] [ 1.809063] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[16:41:05.906] [ 1.809693] sensor_register_slave:mma8452,id=17
[16:41:05.906] [ 1.809755] sensor_register_slave:lis3dh,id=7
[16:41:05.906] [ 1.809772] sensor_register_slave:mma7660,id=18
[16:41:05.906] [ 1.809788] sensor_register_slave:lsm303d,id=22
[16:41:05.906] [ 1.809803] sensor_register_slave:gs_mc3230,id=23
[16:41:05.906] [ 1.809811] [Gsensor] gsensor_init
[16:41:05.906] [ 1.809827] sensor_register_slave:mpu6880_acc,id=24
[16:41:05.906] [ 1.809843] sensor_register_slave:mpu6500_acc,id=25
[16:41:05.906] [ 1.809858] sensor_register_slave:lsm330_acc,id=26
[16:41:05.906] [ 1.809873] sensor_register_slave:bma2xx_acc,id=27
[16:41:05.906] [ 1.809889] sensor_register_slave:akm8975,id=30
[16:41:05.906] [ 1.809905] sensor_register_slave:akm8963,id=31
[16:41:05.916] [ 1.809922] sensor_register_slave:l3g4200d,id=45
[16:41:05.916] [ 1.809970] sensor_register_slave:l3g20d,id=46
[16:41:05.916] [ 1.809986] sensor_register_slave:ewtsa,id=47
[16:41:05.916] [ 1.810003] sensor_register_slave:lsm330_gyro,id=51
[16:41:05.916] [ 1.810018] sensor_register_slave:cm3217,id=53
[16:41:05.916] [ 1.810034] sensor_register_slave:cm3218,id=54
[16:41:05.916] [ 1.810049] sensor_register_slave:ls_stk3410,id=62
[16:41:05.916] [ 1.810065] sensor_register_slave:ps_stk3410,id=67
[16:41:05.916] [ 1.811162] i2c /dev entries driver
[16:41:05.916] [ 1.813052] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[16:41:05.916] [ 1.813188] fan53555-reg: supplied by vcc5v0_sys
[16:41:05.916] [ 1.815873] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[16:41:05.916] [ 1.815986] fan53555-reg: supplied by vcc5v0_sys
[16:41:05.916] [ 1.818290] rockchip-pinctrl pinctrl: pin gpio1-18 already requested by 0-0040; cannot claim for 0-001b
[16:41:05.916] [ 1.818309] rockchip-pinctrl pinctrl: pin-50 (0-001b) status -22
[16:41:05.916] [ 1.818365] rockchip-pinctrl pinctrl: could not request pin 50 (gpio1-18) from group pmic-dvs2 on device rockchip-pinctrl
[16:41:05.916] [ 1.818378] rk808 0-001b: Error applying setting, reverse things back
[16:41:05.916] [ 1.818836] rk808 0-001b: Pmic Chip id: 0x0
[16:41:05.916] [ 1.822501] rk808-regulator rk808-regulator: there is no dvs0 gpio
[16:41:05.916] [ 1.822615] rk808-regulator rk808-regulator: there is no dvs1 gpio
[16:41:05.916] [ 1.822760] DCDC_REG1: supplied by vcc3v3_sys
[16:41:05.927] [ 1.823718] DCDC_REG2: supplied by vcc3v3_sys
[16:41:05.927] [ 1.824434] DCDC_REG3: supplied by vcc3v3_sys
[16:41:05.927] [ 1.824773] DCDC_REG4: supplied by vcc3v3_sys
[16:41:05.927] [ 1.825385] LDO_REG1: supplied by vcc3v3_sys
[16:41:05.927] [ 1.826652] LDO_REG2: supplied by vcc3v3_sys
[16:41:05.927] [ 1.827744] LDO_REG3: supplied by vcc3v3_sys
[16:41:05.927] [ 1.828854] LDO_REG4: supplied by vcc3v3_sys
[16:41:05.927] [ 1.830001] LDO_REG5: supplied by vcc3v3_sys
[16:41:05.927] [ 1.831101] LDO_REG6: supplied by vcc3v3_sys
[16:41:05.927] [ 1.832205] LDO_REG7: supplied by vcc3v3_sys
[16:41:05.927] [ 1.833355] LDO_REG8: supplied by vcc3v3_sys
[16:41:05.927] [ 1.834457] SWITCH_REG1: supplied by vcc3v3_sys
[16:41:05.927] [ 1.834871] SWITCH_REG2: supplied by vcc3v3_sys
[16:41:05.927] [ 1.835488] firefly_hwversion_in_range 焘 |
|